If there is no watch_queue, holding the pipe mutex is enough to
prevent concurrent writes, and we can avoid the spinlock.
O_NOTIFICATION_QUEUE is an exotic and rarely used feature, and of all
the pipes that exist at any given time, only very few actually have a
watch_queue, therefore it appears worthwile to optimize the common
case.
This patch does not optimize pipe_resize_ring() where the spinlocks
could be avoided as well; that does not seem like a worthwile
optimization because this function is not called often.
Related commits:
- commit 8df441294d ("pipe: Check for ring full inside of the
spinlock in pipe_write()")
- commit b667b86734 ("pipe: Advance tail pointer inside of wait
spinlock in pipe_read()")
- commit 189b0ddc24 ("pipe: Fix missing lock in pipe_resize_ring()")
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Message-Id: <20230921075755.1378787-4-max.kellermann@ionos.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This reverts commit 8df441294d ("pipe: Check for ring full inside of
the spinlock in pipe_write()") which was obsoleted by commit
c73be61ced ("pipe: Add general notification queue support") because
now pipe_write() fails early with -EXDEV if there is a watch_queue.
Without a watch_queue, no notifications can be posted to the pipe and
mutex protection is enough, as can be seen in splice_pipe_to_pipe()
which does not use the spinlock either.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Message-Id: <20230921075755.1378787-3-max.kellermann@ionos.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This declutters the code by reducing the number of #ifdefs and makes
the watch_queue checks simpler. This has no runtime effect; the
machine code is identical.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Message-Id: <20230921075755.1378787-2-max.kellermann@ionos.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This has no effect on 64 bit because there are 10 32-bit integers
surrounding the two bools, but on 32 bit architectures, this reduces
the struct size by 4 bytes by merging the two bools into one word.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Message-Id: <20230921075755.1378787-1-max.kellermann@ionos.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
SB_POSIXACL must be set when a filesystem supports POSIX ACLs, but NFSv4
also sets this flag to prevent the VFS from applying the umask on
newly-created files. NFSv4 doesn't support POSIX ACLs however, which
causes confusion when other subsystems try to test for them.
Add a new SB_I_NOUMASK flag that allows filesystems to opt-in to umask
stripping without advertising support for POSIX ACLs. Set the new flag
on NFSv4 instead of SB_POSIXACL.
Also, move mode_strip_umask to namei.h and convert init_mknod and
init_mkdir to use it.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230911-acl-fix-v3-1-b25315333f6c@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Given a wrong root device, current log may not give the pretty name
which is useful to locate root cause.
For example, there are 2 blk devs in a VM, /dev/vda which has 2 partitials
/dev/vda1 and /dev/vda2 and /dev/vdb which is blank. /dev/vda2 is the
right root dev. When set "root=/dev/vdb", we get error log:
[ 0.635575] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(254,16)
It's not straightforward to find out the root cause as there is lack of
the root devive name therefore hard for people to get those info from the
device number, in the example, (254,16).
It is more comprehensive way to hint the root cause if pretty name is
given here, like:
[ 0.559887] Kernel panic - not syncing: VFS: Unable to mount root fs on "/dev/vdb" or unknown-block(254,16)
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Message-Id: <20230907091025.3436878-1-jianyong.wu@arm.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add PM ops for Suspend to Idle. When the system suspended,
the Ethernet Serdes's clock will be stopped. So, this driver needs
to re-initialize the Ethernet Serdes by phy_init() in
renesas_eth_sw_resume(). Otherwise, timeout happened in phy_power_on().
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Array index should not be negative, so modify the condition of
rswitch_for_each_enabled_port_continue_reverse() macro, and then
use unsigned int instead.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The Powkiddy RGB30 has no onboard UART header, so remove the reference
to it in the device tree. This was left on by mistake in the initial
commit.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231018153357.343142-4-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Set the VPLL frequency for the RGB30 to 292.5MHz to support running
the 720x720 display panel at 59.97hz. Without this change, the panel
runs at 59.08hz.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231018153357.343142-3-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
After a discussion about removing VLYNQ support from the Kernel, it was
concluded that its only user, the AR7 platform can go [1]. Even OpenWRT
has removed support because these devices are "stuck with 3.18" [2].
[1] https://lore.kernel.org/r/3395161f-2543-46f0-83d9-b918800305e1@gmail.com
[2] https://openwrt.org/docs/techref/targets/ar7
Suggested-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
AR7 is going to be removed from the Kernel, so remove its watchdog
support. This allows us to remove the platform because this driver
includes a platform specific header.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There are no users with a vlynq_driver in the Kernel tree. Also, only
the AR7 platform ever initialized a VLYNQ bus, but AR7 is going to be
removed from the Kernel. OpenWRT had some out-of-tree drivers which they
probably intended to upport, but AR7 devices are even there not
supported anymore because they are "stuck with Kernel
3.18" [1]. This code can go.
[1] https://openwrt.org/docs/techref/targets/ar7
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
AR7 is going to be removed from the Kernel, so remove its support for
MTD.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
AR7 is going to be removed from the Kernel, so remove its type
definition from 8250 code. As with previous removals, I checked with
Debian Code Search that 'PORT_AR7' is not used in userspace.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
ReiserFS has been deprecated for a year and a half, yet is still built
as part of a defconfig kernel.
According to commit eb103a5164 ("reiserfs: Deprecate reiserfs"), the
filesystem is slated to be removed in 2025. Remove it from the defconfig
profiles now, as part of its deprecation process.
Signed-off-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
arch/mips/pci/fixup-lantiq.c requires nothing from <linux/of_irq.h>, so
remove the include of it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
After bbd8810d39 ("PCI: Remove unused includes and superfluous struct
declaration"), <linux/of_pci.h> no longer includes <linux/pci.h>, which
provides the extern declarations for pcibios_plat_dev_init() and
pcibios_map_irq() via <asm/pci.h>.
This results in these new warnings:
arch/mips/pci/fixup-lantiq.c:13:5: warning: no previous prototype for 'pcibios_plat_dev_init' [-Wmissing-prototypes]
arch/mips/pci/fixup-lantiq.c:24:5: warning: no previous prototype for 'pcibios_map_irq' [-Wmissing-prototypes]
Include <linux/pci.h> directly to get these declarations.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310070445.tzRBNYRC-lkp@intel.com/
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
After commit 411740f542 ("KVM: MIPS/MMU: Implement KVM_CAP_SYNC_MMU")
old_pte is no longer used in kvm_mips_map_page(). So remove it to fix a
build warning about variable set but not used:
arch/mips/kvm/mmu.c: In function 'kvm_mips_map_page':
>> arch/mips/kvm/mmu.c:701:29: warning: variable 'old_pte' set but not used [-Wunused-but-set-variable]
701 | pte_t *ptep, entry, old_pte;
| ^~~~~~~
Cc: stable@vger.kernel.org
Fixes: 411740f542 ("KVM: MIPS/MMU: Implement KVM_CAP_SYNC_MMU")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310070530.aARZCSfh-lkp@intel.com/
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Because group consistency is non-atomic between parent (filedesc) and children
(inherited) events, it is possible for PERF_FORMAT_GROUP read() to try and sum
non-matching counter groups -- with non-sensical results.
Add group_generation to distinguish the case where a parent group removes and
adds an event and thus has the same number, but a different configuration of
events as inherited groups.
This became a problem when commit fa8c269353 ("perf/core: Invert
perf_read_group() loops") flipped the order of child_list and sibling_list.
Previously it would iterate the group (sibling_list) first, and for each
sibling traverse the child_list. In this order, only the group composition of
the parent is relevant. By flipping the order the group composition of the
child (inherited) events becomes an issue and the mis-match in group
composition becomes evident.
That said; even prior to this commit, while reading of a group that is not
equally inherited was not broken, it still made no sense.
(Ab)use ECHILD as error return to indicate issues with child process group
composition.
Fixes: fa8c269353 ("perf/core: Invert perf_read_group() loops")
Reported-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231018115654.GK33217@noisy.programming.kicks-ass.net
Provide helpers for accessing I/O memory in a helper module. The fbdev
core uses these helpers, so select the module unconditionally for fbdev.
Drivers will later be able to select the module individually and the
helpers will become optional.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-2-tzimmermann@suse.de
Enabling KASAN and running some iperf tests raises some memory issues with
vmm_table:
BUG: KASAN: slab-out-of-bounds in wilc_wlan_handle_txq+0x6ac/0xdb4
Write of size 4 at addr c3a61540 by task wlan0-tx/95
KASAN detects that we are writing data beyond range allocated to vmm_table.
There is indeed a mismatch between the size passed to allocator in
wilc_wlan_init, and the range of possible indexes used later: allocation
size is missing a multiplication by sizeof(u32)
Fixes: 40b717bfce ("wifi: wilc1000: fix DMA on stack objects")
Cc: stable@vger.kernel.org
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231017-wilc1000_tx_oops-v3-1-b2155f1f7bee@bootlin.com
Since there is no chip-specific code behind 'chk_switch_dmdp()',
there is no need to maintain function pointer in 'struct rtl_hal_ops'
and relevant common code may be simplified. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231016135925.129223-3-dmantipov@yandex.ru
Since 'fill_fake_txdesc()' is actually implemented for rtl8192cu
only but never used, there is no need to maintain function pointer
in 'struct rtl_hal_ops' and 'rtl92cu_fill_fake_txdesc()' may be
dropped. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231016135925.129223-2-dmantipov@yandex.ru
Since 'pre_fill_tx_bd_desc()' is actually used for rtl8192ee only,
there is no need to maintain function pointer in 'struct rtl_hal_ops',
and 'rtl92ee_pre_fill_tx_bd_desc()' may be converted to static.
Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231016135925.129223-1-dmantipov@yandex.ru
We need this register setting only for the software DCFO(digital carrier
frequency offset) compensation so we move it to the proper position to
prevent the incorrect setting.
Signed-off-by: Cheng-Chieh Hsieh <cj.hsieh@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231016065115.751662-6-pkshih@realtek.com
DCFO tracking compensate the CFO (carrier frequency offset) by digital
hardware that provides fine CFO estimation. Although the avg_cfo which
is a coarse information becomes zero, still we need DCFO tracking to
compensate the residual CFO. However, the original flow skips the case
when avg_cfo is zero, so we fix it to have expected performance.
Signed-off-by: Cheng-Chieh Hsieh <cj.hsieh@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231016065115.751662-5-pkshih@realtek.com
The register address used for CFO(carrier frequency offset) tracking is
different from WiFi 7 series, so we change the way to access it. And we
refine the flow of CFO tracking to compatible all WiFi 7 and 6 ICs.
Signed-off-by: Cheng-Chieh Hsieh <cj.hsieh@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231016065115.751662-4-pkshih@realtek.com
The register fields of BSS color map and valid bit are in the same register
for existing chips, but coming WiFi 7 chips define another register to
set valid bit, so add a field to chip_info to reuse the code.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231016065115.751662-3-pkshih@realtek.com
Change naming to disambiguate the functions because their names are common
and not clear about the purpose. Not change logic at all.
These functions are to control baseband AGC while BT coexists with WiFi.
Among these functions, ctrl_btg_bt_rx is used to control AGC related
settings, which is affected by BT RX, while BT shares the same path
with wifi; ctrl_nbtg_bt_tx is used to control AGC settings under
non-shared path condition, which is affected by BT TX.
Signed-off-by: Chung-Hsuan Hung <hsuan8331@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231016065115.751662-2-pkshih@realtek.com
Sometimes firmware may enter strange state or infinite
loop due to unknown bug, and then it will lead critical
function fail, such as sending H2C command or changing
power mode. In these abnormal states, we add more debug
information, including hardware register status, to help
further investigation.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231016053554.744180-3-pkshih@realtek.com
The coming dump function for FW malfunction will add a function to
dump registers to reflect status. However, if we are not debugging
the mechanism, we don't print anything, so avoid reading registers by
checking debug mask to reduce IO.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231016053554.744180-2-pkshih@realtek.com
Remove set but otherwise unused 'sleep_ms', 'last_action', 'state'
and 'last_slept' members of 'struct rtl_ps_ctl' (these seems to be
a leftovers from some older code) and adjust 'rtl_swlps_wq_callback()'
accordingly. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231013124534.19714-1-dmantipov@yandex.ru
This is a kconfig warning in a randconfig when CONFIG_PCI is not set:
WARNING: unmet direct dependencies detected for SSB_EMBEDDED
Depends on [n]: SSB [=y] && SSB_DRIVER_MIPS [=y] && SSB_PCICORE_HOSTMODE [=n]
Selected by [y]:
- BCM47XX_SSB [=y] && BCM47XX [=y]
This is caused by arch/mips/bcm47xx/Kconfig's symbol BCM47XX_SSB
selecting SSB_EMBEDDED when CONFIG_PCI is not set.
This warning can be prevented by altering SSB_EMBEDDED to allow for
PCI=n or the former SSB_PCICORE_HOSTMODE.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Michael Büsch <m@bues.ch>
Cc: linux-wireless@vger.kernel.org
Cc: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231012220856.23260-1-rdunlap@infradead.org
During device init, a struct for HW stats will be allocated. As HW
stats are not supported for VF and HIP08, currently
hns_roce_alloc_hw_port_stats() returns NULL in this case. However,
ib-core considers the returned NULL pointer as memory allocation
failure and returns ENOMEM, eventually leading to the failure of VF
and HIP08 init.
In the case where the driver does not support the .alloc_hw_port_stats()
ops, ib-core will return EOPNOTSUPP and ignore this error code in the
upper layer function. So for VF and HIP08, just don't set the HW stats
ops to ib-core.
Fixes: 5a87279591 ("RDMA/hns: Support hns HW stats")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-8-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The num_ports capability of devices should be compared with the
number of port(i.e. the input param "port_num") but not the port
index(i.e. port_num - 1).
Fixes: 5a87279591 ("RDMA/hns: Support hns HW stats")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-7-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Due to hardware limitations, only DCQCN is supported for UD. Therefore, the
default algorithm for UD is set to DCQCN.
Fixes: f91696f2f0 ("RDMA/hns: Support congestion control type selection according to the FW")
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-6-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
SL set by users may exceed the capability of devices. So add check
for this situation.
Fixes: fba429fcf9 ("RDMA/hns: Fix missing fields in address vector")
Fixes: 70f9252158 ("RDMA/hns: Use the reserved loopback QPs to free MR before destroying MPT")
Fixes: f0cb411aad ("RDMA/hns: Use new interface to modify QP context")
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-5-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The ib_mtu_enum_to_int() and uverbs_attr_get_len() may returns a negative
value. In this case, mixed comparisons of signed and unsigned types will
throw wrong results.
This patch adds judgement for this situation.
Fixes: 30b707886a ("RDMA/hns: Support inline data in extented sge space for RC")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
ucmd in hns_roce_create_qp_common() are not initialized. But it works fine
until new member sdb_addr is added to struct hns_roce_ib_create_qp.
If the user-mode driver uses an old version ABI, then the value of the new
member will be undefined after ib_copy_from_udata().
This patch fixes it by initialize this variable to 0. And the default value
of the new member sdb_addr will be 0 which is invalid.
Fixes: 0425e3e6e0 ("RDMA/hns: Support flush cqe for hip08 in kernel space")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The current driver will print all asynchronous events. Some of the
print levels are set improperly, e.g. SRQ limit reach and SRQ last
wqe reach, which may also occur during normal operation of the software.
Currently, the information of these event is printed as a warning,
which causes a large amount of printing even during normal use of the
application. As a result, the service performance deteriorates.
This patch fixes the printing storms by modifying the print level.
Fixes: b00a92c8f2 ("RDMA/hns: Move all prints out of irq handle")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20231017125239.164455-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Document named opp-microvolt property for opp-v2-kryo-cpu schema.
This property is used to declare multiple voltage ranges selected on the
different values read from efuses. The selection is done based on the
speed pvs values and the named opp-microvolt property is selected by the
qcom-cpufreq-nvmem driver.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add netlink command that enables/disables privileged QKEY by default.
It is disabled by default, since according to IB spec only privileged
users are allowed to use privileged QKEY.
According to the IB specification rel-1.6, section 3.5.3:
"QKEYs with the most significant bit set are considered controlled
QKEYs, and a HCA does not allow a consumer to arbitrarily specify a
controlled QKEY."
Using rdma tool,
$rdma system set privileged-qkey on
When enabled non-privileged users would be able to use
controlled QKEYs which are considered privileged.
Using rdma tool,
$rdma system set privileged-qkey off
When disabled only privileged users would be able to use
controlled QKEYs.
You can also use the command below to check the parameter state:
$rdma system show
netns shared privileged-qkey off copy-on-fork on
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://lore.kernel.org/r/90398be70a9d23d2aa9d0f9fd11d2c264c1be534.1696848201.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
virt_to_phys() doesn't need the address pointer to be mutable.
At the same time allowing it to be mutable leads to the following build
warning for constant pointers:
warning: passing argument 1 of ‘virt_to_phys’ discards ‘const’ qualifier from pointer target type
Signed-off-by: Stanislav Kinsburskii <stanislav.kinsburskii@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/168155747391.13678.10634415747614468991.stgit@skinsburskii.localdomain
Sparse reports an endianness error with the else case of
val = (cpu_endian ? be64_to_cpu(reg_entry->reg_val) :
(u64)(reg_entry->reg_val));
This is a safe operation because the code is explicitly working with
dynamic endianness, so add the __force annotation to tell Sparse to
ignore it.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-13-bgray@linux.ibm.com
Sparse reports a warning when casting to an int. There is no need to
cast in the first place, so drop them.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-12-bgray@linux.ibm.com
Sparse reports dereferencing an __iomem pointer. These routines
are clearly low level handlers for IO memory, so force cast away
the __iomem annotation to tell sparse the dereferences are safe.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231011053711.93427-11-bgray@linux.ibm.com
