Just as unevaluatedProperties or additionalProperties are required at
the top level of schemas, they should (and will) also be required for
child node schemas. That ensures only documented properties are
present for any node.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Patchwork: https://patchwork.freedesktop.org/patch/559385/
Link: https://lore.kernel.org/r/20230925212434.1972368-1-robh@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Plugging in an Apple dongle without the HDMI cable attached prints out
an error message in the kernel logs when nothing is actually wrong.
no downstream ports connected
This is because the downstream port for the HDMI connector is not
connected, so the Apple dongle reports that as a zero sink count device.
Cc: Vinod Polimera <quic_vpolimer@quicinc.com>
Cc: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/556068/
Link: https://lore.kernel.org/r/20230906181226.2198441-3-swboyd@chromium.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
This function is basically a one-liner when you ignore the debug
logging. Just inline the function and drop the log to simplify the code.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Vinod Polimera <quic_vpolimer@quicinc.com>
Cc: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/556066/
Link: https://lore.kernel.org/r/20230906181226.2198441-2-swboyd@chromium.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
As the INTF is fixed at the encoder creation time, we can move the
check whether INTF supports tearchck to dpu_encoder_phys_cmd_init().
This function can return an error if INTF doesn't have required feature.
Performing this check in dpu_encoder_phys_cmd_tearcheck_config() is less
useful, as this function returns void.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/555553/
Link: https://lore.kernel.org/r/20230904020454.2945667-9-dmitry.baryshkov@linaro.org
The DPU_INTF_TE bit is set for all INTF blocks on DPU >= 5.0, however
only INTF_1 and INTF_2 actually support tearing control (both are
INTF_DSI). Rather than trying to limit the DPU_INTF_TE feature bit to
those two INTF instances, check for the major && INTF type.
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/555547/
Link: https://lore.kernel.org/r/20230904020454.2945667-6-dmitry.baryshkov@linaro.org
The DP CTS test for EDID last block checksum expects the checksum for
the last block, invalid or not. Skip the validity check.
For the most part (*), the EDIDs returned by drm_get_edid() will be
valid anyway, and there's the CTS workaround to get the checksum for
completely invalid EDIDs. See commit 7948fe12d4 ("drm/msm/dp: return
correct edid checksum after corrupted edid checksum read").
This lets us remove one user of drm_edid_block_valid() with hopes the
function can be removed altogether in the future.
(*) drm_get_edid() ignores checksum errors on CTA extensions.
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/555361/
Link: https://lore.kernel.org/r/20230901142034.580802-1-jani.nikula@intel.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
This function is simply drm_dp_is_branch() so use that instead of
open-coding it.
Cc: Vinod Polimera <quic_vpolimer@quicinc.com>
Cc: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/554989/
Link: https://lore.kernel.org/r/20230829184735.2841739-8-swboyd@chromium.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The function dp_link_parse_sink_count() is really just
drm_dp_read_sink_count(). It debug prints out the bit for content
protection (DP_SINK_CP_READY), but that is not useful beyond debug
because 'link->dp_link.sink_count' is overwritten to only contain the
sink_count in this same function. Just use drm_dp_read_sink_count() in
the one place this function is called to simplify.
Cc: Vinod Polimera <quic_vpolimer@quicinc.com>
Cc: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/554987/
Link: https://lore.kernel.org/r/20230829184735.2841739-7-swboyd@chromium.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
These are open-coded versions of common functions. Replace them with the
common code to improve readability.
Cc: Vinod Polimera <quic_vpolimer@quicinc.com>
Cc: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/554990/
Link: https://lore.kernel.org/r/20230829184735.2841739-6-swboyd@chromium.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The member 'aux_cfg_update_done' is always false. This is dead code that
never runs. Remove it.
Cc: Vinod Polimera <quic_vpolimer@quicinc.com>
Cc: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/554985/
Link: https://lore.kernel.org/r/20230829184735.2841739-5-swboyd@chromium.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
We read the downstream port count and capability info but never use it
anywhere. Remove 'ds_port_cnt' and 'ds_cap_info' and any associated code
from this driver. Fold the check for 'dfp_present' into a call to
drm_dp_is_branch() at the one place it is used to get rid of any member
storage related to downstream ports.
Cc: Vinod Polimera <quic_vpolimer@quicinc.com>
Cc: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/554984/
Link: https://lore.kernel.org/r/20230829184735.2841739-4-swboyd@chromium.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Use the common function drm_dp_read_sink_count() instead of open-coding
it. This shrinks the kernel text a tiny bit.
Cc: Vinod Polimera <quic_vpolimer@quicinc.com>
Cc: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/554983/
Link: https://lore.kernel.org/r/20230829184735.2841739-3-swboyd@chromium.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
This function duplicates the common function drm_dp_read_dpcd_caps().
The array of DPCD registers filled in is one size larger than the
function takes, but from what I can tell that extra byte was never used.
Resize the array and use the common function to reduce the code here.
Cc: Vinod Polimera <quic_vpolimer@quicinc.com>
Cc: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/554981/
Link: https://lore.kernel.org/r/20230829184735.2841739-2-swboyd@chromium.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Move the setting of dpu_enc::wide_bus_en to
dpu_encoder_virt_atomic_enable() so that it mirrors how dpu_enc::dsc
is being set.
Since wide bus for DSI is related to DSC, having it mirror how DSC
is set in DPU will also make it easier to accommodate for the possibility
of DSC for DSI being set during runtime in the future.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/553759/
Link: https://lore.kernel.org/r/20230822-add-widebus-support-v4-1-9dc86083d6ea@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The NULL initialization of the pointers assigned by kzalloc() first is
not necessary, because if the kzalloc() failed, the pointers will be
assigned NULL, otherwise it works as usual. so remove it.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/551872/
Link: https://lore.kernel.org/r/20230809034445.434902-4-ruanjinjie@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In order to simplify IRQ declarations, shift IRQ indices by 1. This
makes 0 the 'no IRQ' value. Thanks to this change, we do no longer have
to explicitly set the 'no interrupt' fields in catalog structures.
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550938/
Link: https://lore.kernel.org/r/20230802100426.4184892-9-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Calculating the byte_clk in kHz is imprecise for a hs_clock of 55687500
Hz, which may be used with a pixel clock of 74.25 MHz with mode
1920x1080-30.
Fix the calculation by using HZ instead of kHZ.
This requires to change the type to u64 to prevent overflows of the
integer type.
Reviewed-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM + Waveshare 10.1inch HDMI LCD (E)
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230818-samsung-dsim-v2-5-846603df0e0a@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230818-samsung-dsim-v2-5-846603df0e0a@pengutronix.de
Rounding the porches up instead of down fixes the samsung-dsim at
some more resolutions and refresh rates:
The following resolutions are working with rounded-up porches, but don't
work when the porches are rounded down:
1920x1080-59.94
1920x1080-30.00
1920x1080-29.97
1920x1080-25.00
1680x1050-59.88
1280x1024-75.02
1200x960-59.99
1280x720-50.00
1024x768-75.03
1024x768-60.00
640x480-60.00
640x480-59.94
Reviewed-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM + Waveshare 10.1inch HDMI LCD (E)
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230818-samsung-dsim-v2-4-846603df0e0a@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230818-samsung-dsim-v2-4-846603df0e0a@pengutronix.de
The PLL requires a clock frequency in a certain platform-dependent range
after the pre-divider. The reference clock for the PLL may change due to
changes to it's parent clock. Thus, the frequency may be out of range or
unsuited for generating the high speed clock for MIPI DSI.
Try to keep the pre-devider small, and set the reference clock close to
the upper limit before recalculating the PLL configuration. Use a
divider with a power of two for the reference clock as this seems to
work best in my tests.
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM + Waveshare 10.1inch HDMI LCD (E)
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230818-samsung-dsim-v2-3-846603df0e0a@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230818-samsung-dsim-v2-3-846603df0e0a@pengutronix.de
The PLL reference clock may change at runtime when its parent clock
changes. For example, this may happen on the i.MX8M Nano if the
reference clock is a child of the Video PLL. If the pixel clock changes,
this may propagate to the Video PLL and as a side effect change the
reference clock. Thus, reading the clock rate during probe is not
sufficient to correctly configure the PLL for the expected hs clock.
Read the actual rate of the reference clock before calculating the PLL
configuration parameters.
Note that the "samsung,pll-clock-frequency" is always preferred and PLL
reference clock is only read from the clock tree if that device tree
property is not set.
Reviewed-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM + Waveshare 10.1inch HDMI LCD (E)
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230818-samsung-dsim-v2-2-846603df0e0a@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230818-samsung-dsim-v2-2-846603df0e0a@pengutronix.de
Since the MIPI configuration can be changed on demand it is very useful
to print more MIPI settings during the MIPI device attach step.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm-beacon
Reviewed-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL i.MX8MM + Waveshare 10.1inch HDMI LCD (E)
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20230818-samsung-dsim-v2-1-846603df0e0a@pengutronix.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230818-samsung-dsim-v2-1-846603df0e0a@pengutronix.de
A1 SoC family has four i2c masters: i2c0 (I2CM_A), i2c1 (I2CM_B), i2c2
(I2CM_C) and i2c3 (I2CM_D).
Signed-off-by: George Stark <gnstark@salutedevices.com>
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231006114145.18718-1-ddrokosov@salutedevices.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231006224644.445295-1-robh@kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Commit 9e70a5e109 ("printk: Add per-console suspended state")
removed console lock usage during resume and replaced it with
the clearly defined console_list_lock and srcu mechanisms.
However, the console lock usage had an important side-effect
of flushing the consoles. After its removal, consoles were no
longer flushed before checking their progress.
Add the console_lock/console_unlock dance to the beginning
of __pr_flush() to actually flush the consoles before checking
their progress. Also add comments to clarify this additional
usage of the console lock.
Note that console_unlock() does not guarantee flushing all messages
since the commit dbdda842fe ("printk: Add console owner and waiter
logic to load balance console writes").
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217955
Fixes: 9e70a5e109 ("printk: Add per-console suspended state")
Co-developed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20231006082151.6969-2-pmladek@suse.com
The old pick_eevdf() could fail to find the actual earliest eligible
deadline when it descended to the right looking for min_deadline, but
it turned out that that min_deadline wasn't actually eligible. In that
case we need to go back and search through any left branches we
skipped looking for the actual best _eligible_ min_deadline.
This is more expensive, but still O(log n), and at worst should only
involve descending two branches of the rbtree.
I've run this through a userspace stress test (thank you
tools/lib/rbtree.c), so hopefully this implementation doesn't miss any
corner cases.
Fixes: 147f3efaa2 ("sched/fair: Implement an EEVDF-like scheduling policy")
Signed-off-by: Ben Segall <bsegall@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/xm261qego72d.fsf_-_@google.com
Marek and Biju reported instances of:
"EEVDF scheduling fail, picking leftmost"
which Mike correlated with cgroup scheduling and the min_deadline heap
getting corrupted; some trace output confirms:
> And yeah, min_deadline is hosed somehow:
>
> validate_cfs_rq: --- /
> __print_se: ffff88845cf48080 w: 1024 ve: -58857638 lag: 870381 vd: -55861854 vmd: -66302085 E (11372/tr)
> __print_se: ffff88810d165800 w: 25 ve: -80323686 lag: 22336429 vd: -41496434 vmd: -66302085 E (-1//autogroup-31)
> __print_se: ffff888108379000 w: 25 ve: 0 lag: -57987257 vd: 114632828 vmd: 114632828 N (-1//autogroup-33)
> validate_cfs_rq: min_deadline: -55861854 avg_vruntime: -62278313462 / 1074 = -57987256
Turns out that reweight_entity(), which tries really hard to be fast,
does not do the normal dequeue+update+enqueue pattern but *does* scale
the deadline.
However, it then fails to propagate the updated deadline value up the
heap.
Fixes: 147f3efaa2 ("sched/fair: Implement an EEVDF-like scheduling policy")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Biju Das <biju.das.jz@bp.renesas.com>
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Mike Galbraith <efault@gmx.de>
Link: https://lkml.kernel.org/r/20231006192445.GE743@noisy.programming.kicks-ass.net
Move hash_and_copy_to_iter() to be with its only caller in networking code.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20230925120309.1731676-13-dhowells@redhat.com
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Christoph Hellwig <hch@lst.de>
cc: Christian Brauner <christian@brauner.io>
cc: Matthew Wilcox <willy@infradead.org>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: David Laight <David.Laight@ACULAB.COM>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
cc: netdev@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Move csum_and_copy_from_iter_full() out of line and then merge
csum_and_copy_from_iter() into its only caller.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20230925120309.1731676-12-dhowells@redhat.com
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Christoph Hellwig <hch@lst.de>
cc: Christian Brauner <christian@brauner.io>
cc: Matthew Wilcox <willy@infradead.org>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: David Laight <David.Laight@ACULAB.COM>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
cc: netdev@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Fold csum_and_memcpy() in to its callers.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20230925120309.1731676-11-dhowells@redhat.com
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Christoph Hellwig <hch@lst.de>
cc: Christian Brauner <christian@brauner.io>
cc: Matthew Wilcox <willy@infradead.org>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: David Laight <David.Laight@ACULAB.COM>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
cc: netdev@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Move csum_and_copy_to/from_iter() to net code now that the iteration
framework can be #included.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20230925120309.1731676-10-dhowells@redhat.com
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Christoph Hellwig <hch@lst.de>
cc: Christian Brauner <christian@brauner.io>
cc: Matthew Wilcox <willy@infradead.org>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: David Laight <David.Laight@ACULAB.COM>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
cc: netdev@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
iter->copy_mc is only used with a bvec iterator and only by
dump_emit_page() in fs/coredump.c so rather than handle this in
memcpy_from_iter_mc() where it is checked repeatedly by _copy_from_iter()
and copy_page_from_iter_atomic(),
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20230925120309.1731676-9-dhowells@redhat.com
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Christoph Hellwig <hch@lst.de>
cc: Christian Brauner <christian@brauner.io>
cc: Matthew Wilcox <willy@infradead.org>
cc: Linus Torvalds <torvalds@linux-foundation.org>
cc: David Laight <David.Laight@ACULAB.COM>
cc: linux-block@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
In unprivileged Xen guests event handling can cause a deadlock with
Xen console handling. The evtchn_rwlock and the hvc_lock are taken in
opposite sequence in __hvc_poll() and in Xen console IRQ handling.
Normally this is no problem, as the evtchn_rwlock is taken as a reader
in both paths, but as soon as an event channel is being closed, the
lock will be taken as a writer, which will cause read_lock() to block:
CPU0 CPU1 CPU2
(IRQ handling) (__hvc_poll()) (closing event channel)
read_lock(evtchn_rwlock)
spin_lock(hvc_lock)
write_lock(evtchn_rwlock)
[blocks]
spin_lock(hvc_lock)
[blocks]
read_lock(evtchn_rwlock)
[blocks due to writer waiting,
and not in_interrupt()]
This issue can be avoided by replacing evtchn_rwlock with RCU in
xen_free_irq(). Note that RCU is used only to delay freeing of the
irq_info memory. There is no RCU based dereferencing or replacement of
pointers involved.
In order to avoid potential races between removing the irq_info
reference and handling of interrupts, set the irq_info pointer to NULL
only when freeing its memory. The IRQ itself must be freed at that
time, too, as otherwise the same IRQ number could be allocated again
before handling of the old instance would have been finished.
This is XSA-441 / CVE-2023-34324.
Fixes: 54c9de8989 ("xen/events: add a new "late EOI" evtchn framework")
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Currently, there is no overflow-check with memdup_user().
Use the new function memdup_array_user() instead of memdup_user() for
duplicating the user-space array safely.
Suggested-by: David Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920123612.16914-7-pstanner@redhat.com
Currently, there is no overflow-check with memdup_user().
Use the new function memdup_array_user() instead of memdup_user() for
duplicating the user-space array safely.
Suggested-by: David Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920123612.16914-6-pstanner@redhat.com
Currently, there is no overflow-check with memdup_user().
Use the new function memdup_array_user() instead of memdup_user() for
duplicating the user-space array safely.
Suggested-by: David Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920123612.16914-5-pstanner@redhat.com
Currently, there is no overflow-check with memdup_user().
Use the new function memdup_array_user() instead of memdup_user() for
duplicating the user-space array safely.
Suggested-by: David Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230920123612.16914-4-pstanner@redhat.com
