Patch series "Expose swapcache stat for memcg v1", v2.
Since commit b603894248 ("mm: memcg: add swapcache stat for memcg v2")
adds swapcache stat for the cgroup v2, it seems there is no reason to hide
it in memcg v1. Conversely, with swapcached it is more accurate to
evaluate the available memory for memcg.
Link: https://lkml.kernel.org/r/20230915105845.3199656-1-liushixin2@huawei.com
Link: https://lkml.kernel.org/r/20230915105845.3199656-2-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Suggested-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Recently, we found that cross-die access to pagetable pages on ARM64
machines can cause performance fluctuations in our business. Currently,
there are no PMU events available to track this situation on our ARM64
machines, so accurate pagetable accounting can help to analyze this issue,
but now the PUD level pagetable accounting is missed.
So introduce pagetable_pud_ctor/dtor() to help to get accurate PUD
pagetable accounting, as well as converting the architectures which use
generic PUD pagetable allocation to add corresponding PUD pagetable
accounting. Moreover this patch will mark the PUD level pagetable with
PG_table flag, which will help to do sanity validation in
unpoison_memory().
On my testing machine, I can see more pagetables statistics after the patch
with page-types tool:
Before patch:
flags page-count MB symbolic-flags long-symbolic-flags
0x0000000004000000 27326 106 __________________________g_________________ pgtable
After patch:
0x0000000004000000 27541 107 __________________________g_________________ pgtable
Link: https://lkml.kernel.org/r/876c71c03a7e69c17722a690e3225a4f7b172fb2.1695017383.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
First found this typo as reviewing memory tier code. Fix it by sed like:
$ sed -i 's/sibiling/sibling/g' $(git grep -l sibiling)
so the acpi one will be corrected as well.
Link: https://lkml.kernel.org/r/20230802092856.819328-1-lizhijian@cn.fujitsu.com
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Switch over to the modern variable naming in the state checker.
Ie. rename the pipe_config stuff to crtc_state.
Also make it clear which is the "software state" (ie. what the
current state should be) vs. "hardware state" (ie. what the
currnet state really is).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231004155607.7719-12-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
There is never any reason to pass in both the crtc and its state
as one can always dig out the crtc from its state. But for more
consistency across the whole state checker let's just pass the
overall atomic state+crtc here as well.
v2: Also pass state+crtc here (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231005122713.3531-1-ville.syrjala@linux.intel.com
do_pages_move does not handle compat pointers for the page list.
correctly. Add in_compat_syscall check and appropriate get_user fetch
when iterating the page list.
It makes the syscall in compat mode (32-bit userspace, 64-bit kernel)
work the same way as the native 32-bit syscall again, restoring the
behavior before my broken commit 5b1b561ba7 ("mm: simplify
compat_sys_move_pages").
More specifically, my patch moved the parsing of the 'pages' array from
the main entry point into do_pages_stat(), which left the syscall
working correctly for the 'stat' operation (nodes = NULL), while the
'move' operation (nodes != NULL) is now missing the conversion and
interprets 'pages' as an array of 64-bit pointers instead of the
intended 32-bit userspace pointers.
It is possible that nobody noticed this bug because the few
applications that actually call move_pages are unlikely to run in
compat mode because of their large memory requirements, but this
clearly fixes a user-visible regression and should have been caught by
ltp.
Link: https://lkml.kernel.org/r/20231003144857.752952-1-gregory.price@memverge.com
Fixes: 5b1b561ba7 ("mm: simplify compat_sys_move_pages")
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We used to determine the number of page table entries to set for a NAPOT
hugepage by using the pte value which actually fails when the pte to set
is a swap entry.
So take advantage of a recent fix for arm64 reported in [1] which
introduces the size of the mapping as an argument of set_huge_pte_at(): we
can then use this size to compute the number of page table entries to set
for a NAPOT region.
Link: https://lkml.kernel.org/r/20230928151846.8229-3-alexghiti@rivosinc.com
Fixes: 82a1a1f3bf ("riscv: mm: support Svnapot in hugetlb page")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reported-by: Ryan Roberts <ryan.roberts@arm.com>
Closes: https://lore.kernel.org/linux-arm-kernel/20230922115804.2043771-1-ryan.roberts@arm.com/ [1]
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Qinglin Pan <panqinglin2020@iscas.ac.cn>
Cc: Conor Dooley <conor@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Fix set_huge_pte_at()".
A recent report [1] from Ryan for arm64 revealed that we do not handle
swap entries when setting a hugepage backed by a NAPOT region (the contpte
riscv equivalent).
As explained in [1], the issue was discovered by a new test in kselftest
which uses poison entries, but the symptoms are different from arm64 though:
- the riscv kernel bugs because we do not handle VM_FAULT_HWPOISON*,
this is fixed by patch 1,
- after that, the test passes because the first pte_napot() fails (the
poison entry does not have the N bit set), and then we only set the
first page table entry covering the NAPOT hugepage, which is enough
for hugetlb_fault() to correctly raise a VM_FAULT_HWPOISON wherever we
write in this mapping since only this first page table entry is
checked
(see https://elixir.bootlin.com/linux/v6.6-rc3/source/mm/hugetlb.c#L6071).
But this seems fragile so patch 2 sets all page table entries of a
NAPOT mapping.
[1]: https://lore.kernel.org/linux-arm-kernel/20230922115804.2043771-1-ryan.roberts@arm.com/
This patch (of 2):
We used to panic when such faults were encountered but we should handle
those faults gracefully for userspace by sending a SIGBUS to the process,
like most architectures do.
Link: https://lkml.kernel.org/r/20230928151846.8229-1-alexghiti@rivosinc.com
Link: https://lkml.kernel.org/r/20230928151846.8229-2-alexghiti@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: Conor Dooley <conor@kernel.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Qinglin Pan <panqinglin2020@iscas.ac.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When the calling function fails after the dup_anon_vma(), the
duplication of the anon_vma is not being undone. Add the necessary
unlink_anon_vma() call to the error paths that are missing them.
This issue showed up during inspection of the error path in vma_merge()
for an unrelated vma iterator issue.
Users may experience increased memory usage, which may be problematic as
the failure would likely be caused by a low memory situation.
Link: https://lkml.kernel.org/r/20230929183041.2835469-3-Liam.Howlett@oracle.com
Fixes: d4af56c5c7 ("mm: start tracking VMAs with maple tree")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Calling vm_brk_flags() with flags set other than VM_EXEC will exit the
function without releasing the mmap_write_lock.
Just do the sanity check before the lock is acquired. This doesn't fix an
actual issue since no caller sets a flag other than VM_EXEC.
Link: https://lkml.kernel.org/r/20230929171937.work.697-kees@kernel.org
Fixes: 2e7ce7d354 ("mm/mmap: change do_brk_flags() to expand existing VMA and add do_brk_munmap()")
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When guard page debug is enabled and set_page_guard returns success, we
miss to forward page to point to start of next split range and we will do
split unexpectedly in page range without target page. Move start page
update before set_page_guard to fix this.
As we split to wrong target page, then splited pages are not able to merge
back to original order when target page is put back and splited pages
except target page is not usable. To be specific:
Consider target page is the third page in buddy page with order 2.
| buddy-2 | Page | Target | Page |
After break down to target page, we will only set first page to Guard
because of bug.
| Guard | Page | Target | Page |
When we try put_page_back_buddy with target page, the buddy page of target
if neither guard nor buddy, Then it's not able to construct original page
with order 2
| Guard | Page | buddy-0 | Page |
All pages except target page is not in free list and is not usable.
Link: https://lkml.kernel.org/r/20230927094401.68205-1-shikemeng@huaweicloud.com
Fixes: 06be6ff3d2 ("mm,hwpoison: rework soft offline for free pages")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
These pin definitions are helpful to have when working with the
driver in the future, so they are in a sense a bit like
documentation. They could be commented out as well, but why.
This should fix these build warnings:
drivers/pinctrl/realtek/pinctrl-rtd1315e.c:231:35: warning:
'rtd1315e_boot_sel_pins' defined but not used [-Wunused-const-variable=]
drivers/pinctrl/realtek/pinctrl-rtd1315e.c:231:35: warning:
'rtd1315e_reset_n_pins' defined but not used [-Wunused-const-variable=]
drivers/pinctrl/realtek/pinctrl-rtd1315e.c:231:35: warning:
'rtd1315e_scan_switch_pins' defined but not used [-Wunused-const-variable=]
drivers/pinctrl/realtek/pinctrl-rtd1315e.c:231:35: warning:
'rtd1315e_testmode_pins' defined but not used [-Wunused-const-variable=]
drivers/pinctrl/realtek/pinctrl-rtd1315e.c:231:35: warning:
'rtd1315e_wd_rset_pins' defined but not used [-Wunused-const-variable=]
drivers/pinctrl/realtek/pinctrl-rtd1319d.c:237:35: warning:
'rtd1319d_boot_sel_pins' defined but not used [-Wunused-const-variable=]
drivers/pinctrl/realtek/pinctrl-rtd1319d.c:237:35: warning:
'rtd1319d_reset_n_pins' defined but not used [-Wunused-const-variable=]
drivers/pinctrl/realtek/pinctrl-rtd1319d.c:237:35: warning:
'rtd1319d_scan_switch_pins' defined but not used [-Wunused-const-variable=]
drivers/pinctrl/realtek/pinctrl-rtd1319d.c:237:35: warning:
'rtd1319d_testmode_pins' defined but not used [-Wunused-const-variable=]
drivers/pinctrl/realtek/pinctrl-rtd1319d.c:237:35: warning:
'rtd1319d_wd_rset_pins' defined but not used [-Wunused-const-variable=]
Cc: Tzuyi Chang <tychang@realtek.com>
Link: https://lore.kernel.org/oe-kbuild-all/202309270313.mBEc9o1A-lkp@intel.com/
Link: https://lore.kernel.org/oe-kbuild-all/202309270448.7Aen3Sgx-lkp@intel.com/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231006-fix-realtek-warnings-v1-1-09af253312ba@linaro.org
There are several issues in the probe function:
1) of_iomap() return NULL on error but the code checks for error
pointers.
2) pinctrl_register() is the reverse. It returns error pointers
but the code checks for NULL.
3) The error paths need to call iounmap(data->base) before returning
to avoid a resource leak.
Fixes: e99ce78030 ("pinctrl: realtek: Add common pinctrl driver for Realtek DHC RTD SoCs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/590b337a-13ce-4391-a09d-d2b06fbc912d@moroto.mountain
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The state checker overwrites the old crtc state with the
current hardware state. While that does save a kmalloc() it seems
rather dubious as there might still be something that we need
in the old crtc state.
Stop doing that and just allocate a temporary state for the state
checker. Should the extra malloc during the commit phase turn out
too annoying we could of course preallocate one for each crtc, but
let's proceed with the straightforward approch for now.
And while at it let's mark the new crtc state as const to make
sure the state checker doesn't mess it up.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231004155607.7719-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
intel_psr_pre_plane_update() operates on a per-crtc level, whereas
intel_psr_post_plane_update() operates on the whole atomic commit,
for no real reason that I can see. Adjust intel_psr_post_plane_update()
to match the intel_psr_pre_plane_update() approach.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231004155607.7719-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The DSU PMU allows monitoring performance events in the DSU cluster,
which is done by configuring and reading back values from the DSU PMU
system registers. However, for write-access to be allowed by ELs lower
than EL3, the EL3 firmware needs to update the setting on the ACTLR3_EL3
register, as it is disallowed by default.
That configuration is not done on the firmware used by the MT8195 SoC,
as a consequence, booting a MT8195-based machine like
mt8195-cherry-tomato-r2 with CONFIG_ARM_DSU_PMU enabled hangs the kernel
just as it writes to the CLUSTERPMOVSCLR_EL1 register, since the
instruction faults to EL3, and BL31 apparently just re-runs the
instruction over and over.
Mark the DSU PMU node in the Devicetree with status "fail", as the
machine doesn't have a suitable firmware to make use of it from the
kernel, and allowing its driver to probe would hang the kernel.
Fixes: 37f2582883 ("arm64: dts: Add mediatek SoC mt8195 and evaluation board")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230720200753.322133-1-nfraprado@collabora.com
Link: https://lore.kernel.org/r/20231003-mediatek-fixes-v6-7-v1-5-dad7cd62a8ff@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
dtbs_check throws a warning at t-phy nodes:
Warning (unit_address_vs_reg): /t-phy@1a243000: node has a unit name, but no reg or ranges property
Warning (unit_address_vs_reg): /soc/t-phy@11c00000: node has a unit name, but no reg or ranges property
The ranges is empty thus removing the `@1a243000`, `@11c00000` from
the node name.
Fixes: 6029cae696 ("arm64: dts: mediatek: mt7622: harmonize node names and compatibles")
Fixes: 918aed7abd ("arm64: dts: mt7986: add pcie related device nodes")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230814093931.9298-2-eugen.hristev@collabora.com
Link: https://lore.kernel.org/r/20231003-mediatek-fixes-v6-7-v1-4-dad7cd62a8ff@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The dts file of the MediaTek MT8195 demo board has been updated to include
new reserved memory regions.
These reserved memory regions are:
- SCP
- VPU,
- Sound DMA
- APU.
These regions are defined with the "shared-dma-pool" compatible property.
In addition, the existing reserved memory regions have been reordered by
their addresses to improve readability and maintainability of the DTS
file.
Cc: stable@vger.kernel.org # 6.1, 6.4, 6.5
Fixes: e4a4175201 ("arm64: dts: mediatek: mt8195-demo: fix the memory size of node secmon")
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230905034511.11232-2-macpaul.lin@mediatek.com
Link: https://lore.kernel.org/r/20231003-mediatek-fixes-v6-7-v1-3-dad7cd62a8ff@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
I am a top reviewer mainly for MediaTek SoC related patches in most
subsystems and I've also been upstreaming both improvements, fixes
and new drivers and devicetrees when required.
The MediaTek scene saw a generous increase in number of patches that
are sent to the lists every week, increasing the amount of required
efforts to maintain the MTK bits overall, and we will possibly see
even more of that.
For this reason, and also because of suggestions and encouragement
coming from the community, I'm stepping up to be a co-maintainer of
MediaTek SoCs support.
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20230929082009.71843-1-angelogioacchino.delregno@collabora.com
Link: https://lore.kernel.org/r/20231003-mediatek-fixes-v6-7-v1-1-dad7cd62a8ff@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fix spelling of "architecture" in the Kbuild file.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
commit c35559f94e ("x86/shstk: Introduce map_shadow_stack syscall")
recently added support for map_shadow_stack() but it is limited to x86
only for now. There is a possibility that other architectures (namely,
arm64 and RISC-V), that are implementing equivalent support for shadow
stacks, might need to add support for it.
Independent of that, reserving arch-specific syscall numbers in the
syscall tables of all architectures is good practice and would help
avoid future conflicts. map_shadow_stack() is marked as a conditional
syscall in sys_ni.c. Adding it to the syscall tables of other
architectures is harmless and would return ENOSYS when exercised.
Note, map_shadow_stack() was assigned #453 during the merge process
since #452 was taken by fchmodat2().
For Powerpc, map it to sys_ni_syscall() as is the norm for Powerpc
syscall tables.
For Alpha, map_shadow_stack() takes up #563 as Alpha still diverges from
the common syscall numbering system in the other architectures.
Link: https://lore.kernel.org/lkml/20230515212255.GA562920@debug.ba.rivosinc.com/
Link: https://lore.kernel.org/lkml/b402b80b-a7c6-4ef0-b977-c0f5f582b78a@sirena.org.uk/
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct cpuinfo_tree.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230922175159.work.357-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
The Energy Aware Scheduler (EAS) relies on the schedutil governor.
When moving to/from the schedutil governor, sched domains must be
rebuilt to allow re-evaluating the enablement conditions of EAS.
This is done through sched_cpufreq_governor_change().
Having a cpufreq governor assumes a cpufreq driver is running.
Inserting/removing a cpufreq driver should trigger a re-evaluation
of EAS enablement conditions, avoiding to see EAS enabled when
removing a running cpufreq driver.
Rebuild the sched domains in schedutil's sugov_init()/sugov_exit(),
allowing to check EAS's enablement condition whenever schedutil
governor is initialized/exited from.
Move relevant code up in schedutil.c to avoid a split and conditional
function declaration.
Rename sched_cpufreq_governor_change() to sugov_eas_rebuild_sd().
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The userspace governor uses the 'cpu' field of cpufreq_policy structure
to track if it is allowed to set the speed of the policy.
However, there is a window where the 'cpu' field is equal to the value
of nr_cpus_id when all affected CPUs of policy are offline, which is an
illegal value to get the per-CPU variable.
To avoid this issue, modify the governor to use a per-policy indicator
to track if the policy is managed.
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The userspace governor currently uses a big global mutex to avoid the
race condition on the governor_data field of cpufreq_policy structure.
This leads to a low concurrency if multiple userspace applications are
trying to set the speed of different policies at the same time.
Introduce a per-policy mutex to allow the updating of different policies
to be performed concurrently, improving overall concurrency.
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The governor currently checks if the input new down_threshold is less
than 100 before storing it, but the up_threshold field of dbs_data
structure is also limited to be less than 100, so this check is
unnecessary and remove it.
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The initialization code of the per-cpu sg_cpu struct is currently split
into two for-loop blocks. This can be simplified by merging the two
blocks into a single loop. This will make the code more maintainable.
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Main updates include:
1. Addition of support for Type 4 PCC subspace that enables platform
notification handling (Huisong Li).
2. Support for the shared interrupt amongst multiple PCC subspaces/
channels (Huisong Li).
3. Consolidation of PCC shared memory region command and status
bitfields definitions that were duplicated and scattered across
multiple PCC client drivers (Sudeep Holla).
-----BEGIN PGP SIGNATURE-----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=bZ1a
-----END PGP SIGNATURE-----
Merge tag 'acpi-pcc-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux
Merge ACPI PCC changes for v6.7 from Sudeep Holla:
"ACPI: PCC: Mailbox and generic updates for v6.7
Main updates include:
1. Addition of support for Type 4 PCC subspace that enables platform
notification handling (Huisong Li).
2. Support for the shared interrupt amongst multiple PCC subspaces/
channels (Huisong Li).
3. Consolidation of PCC shared memory region command and status
bitfields definitions that were duplicated and scattered across
multiple PCC client drivers (Sudeep Holla)."
* tag 'acpi-pcc-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
soc: kunpeng_hccs: Migrate to use generic PCC shmem related macros
hwmon: (xgene) Migrate to use generic PCC shmem related macros
i2c: xgene-slimpro: Migrate to use generic PCC shmem related macros
ACPI: PCC: Add PCC shared memory region command and status bitfields
mailbox: pcc: Support shared interrupt for multiple subspaces
mailbox: pcc: Add support for platform notification handling
The CONFIG_PCI_P2PDMA Kconfig help text contains a Cyrillic small "Dze"
(ѕ). When menuconfig renders it, it looks like "Enable ~U drivers" instead
of "Enables drivers".
Replace it by a plain "s" so the help text is displayed correctly by
menuconfig.
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> later posted the same
patch at
https://lore.kernel.org/r/20231006150209.87666-1-u.kleine-koenig@pengutronix.de
Link: https://lore.kernel.org/r/1658301723-111283-1-git-send-email-liusong@linux.alibaba.com
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Liu Song <liusong@linux.alibaba.com>
[bhelgaas: commit log, add Uwe's report]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
The correct name of this chip is MXC4005, not MX4005. This is confirmed
both by the manufacturer website and by the title of the original commit,
which added other MXCxxxx devices as well but only this one misses a "c" in
the compatible string.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Fixes: d9bf5d37fd ("dt-bindings:trivial-devices: Add memsic,mxc4005/mxc6255/mxc6655 entries")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231004-mxc4005-device-tree-support-v1-1-e7c0faea72e4@bootlin.com
Signed-off-by: Rob Herring <robh@kernel.org>
The 'msi' child node schema is missing constraints on additional properties.
It turns out it is incomplete and properties for it are documented in the
parent node by mistake. Move the reference to msi-controller.yaml and
the custom properties to the 'msi' node. Adding 'unevaluatedProperties'
ensures all the properties in the 'msi' node are documented.
With the schema corrected, a minimal interrupt controller node is needed
to properly decode the interrupt properties since the example has
multiple interrupt parents.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Fixes: 905b986d09 ("dt-bindings: pci: Convert iProc PCIe to YAML")
Link: https://lore.kernel.org/r/20230926155613.33904-3-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Drop the unnecessary listing of properties already defined in
pci-bus.yaml. Unless there are additional constraints, it is not
necessary.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230926155351.31117-2-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The example's indentation is off. While fixing this, the 'bus' node
is unnecessary and can be dropped. It is also preferred to split up
unrelated examples to their own entries.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230926155351.31117-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Just as unevaluatedProperties or additionalProperties are required at
the top level of schemas, they should (and will) also be required for
child node schemas. That ensures only documented properties are
present for any node.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230925212803.1976803-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
A bus schema based on simple-pm-bus shouldn't define how many 'reg' entries
a child device has. That is a property of the device. Drop the 'reg' entry.
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230925212639.1975002-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Extract duplicate code from these four functions
unix_redir_to_connected()
udp_redir_to_connected()
inet_unix_redir_to_connected()
unix_inet_redir_to_connected()
to generate a new helper pairs_redir_to_connected(). Create the
different socketpairs in these four functions, then pass the
socketpairs info to the new common helper to do the connections.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Link: https://lore.kernel.org/r/54bb28dcf764e7d4227ab160883931d2173f4f3d.1696588133.git.geliang.tang@suse.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
