Commit graph

1,233,462 commits

Author SHA1 Message Date
Reka Norman
e90bd1fe7c media: cros-ec-cec: Support multiple ports in set/get host commands
Reuse the top four bits of the cmd field to specify the port number.
The reason for doing this as opposed to adding a separate uint8_t field
is it avoids the need to add new versions of these commands. The change
is backwards compatible since these bits were previously always zero, so
the default behaviour is to always operate on port 0.

Signed-off-by: Reka Norman <rekanorman@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27 09:39:54 +02:00
Reka Norman
4d0e179a42 media: cros-ec-cec: Manage an array of ports
To support multiple CEC ports, change cros_ec_cec to contain an array of
ports, each with their own CEC adapter, etc.

For now, only create a single port and use that port everywhere, so
there is no functional change. Support for multiple ports will be added
in the following patches.

Signed-off-by: Reka Norman <rekanorman@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27 09:39:54 +02:00
Reka Norman
afca12e35e media: cros-ec-cec: Use cros_ec_cmd to send host commands
Use the cros_ec_cmd helper function to reduce the amount of boilerplate
when sending host commands.

Signed-off-by: Reka Norman <rekanorman@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27 09:39:54 +02:00
Martin Dørum
89936bfbdf media: qcom/camss: use 1X16 formats instead of 2X8
Platforms with qcom-camss use CSI-2, which means 1X16 is more correct
than 2X8. The fact that qcom-camss supported only 2X8 meant it was
incompatible with camera sensors it should have been compatible with.

For example, the ov5645 driver (correctly) reports that its format is
UYVY8_1X16 (after ba449bb562).
Since qcom-camss only supports 2X8, the qcom-camss system is
incompatible with the ov5645 driver, even though they should be
compatible.

This patch replaces all uses of UYVY8_2X8/VYUY8_2X8/YUYV8_2X8/YVYU8_2X8
with the equivalent 1X16 formats.

Signed-off-by: Martin Dørum <dorum@noisolation.com>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27 09:39:54 +02:00
Konrad Dybcio
ef876db6a2 dt-bindings: media: qcom,sdm845-venus-v2: Allow interconnect properties
Allow the interconnect properties, which have been in use for ages.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27 09:39:54 +02:00
Andrey Konovalov
87889f1b7e media: qcom: camss: Fix csid-gen2 for test pattern generator
In the current driver csid Test Pattern Generator (TPG) doesn't work.
This change:
- fixes writing frame width and height values into CSID_TPG_DT_n_CFG_0
- fixes the shift by one between test_pattern control value and the
  actual pattern.
- drops fixed VC of 0x0a which testing showed prohibited some test
  patterns in the CSID to produce output.
So that TPG starts working, but with the below limitations:
- only test_pattern=9 works as it should
- test_pattern=8 and test_pattern=7 produce black frame (all zeroes)
- the rest of test_pattern's don't work (yavta doesn't get the data)
- regardless of the CFA pattern set by 'media-ctl -V' the actual pixel
  order is always the same (RGGB for any RAW8 or RAW10P format in
  4608x2592 resolution).

Tested with:

RAW10P format, VC0:
 media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4608x2592 field:none]'
 media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4608x2592 field:none]'
 media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
 v4l2-ctl -d /dev/v4l-subdev6 -c test_pattern=9
 yavta -B capture-mplane --capture=3 -n 3 -f SRGGB10P -s 4608x2592 /dev/video0

RAW10P format, VC1:
 media-ctl -V '"msm_csid0":2[fmt:SRGGB10/4608x2592 field:none]'
 media-ctl -V '"msm_vfe0_rdi1":0[fmt:SRGGB10/4608x2592 field:none]'
 media-ctl -l '"msm_csid0":2->"msm_vfe0_rdi1":0[1]'
 v4l2-ctl -d /dev/v4l-subdev6 -c test_pattern=9
 yavta -B capture-mplane --capture=3 -n 3 -f SRGGB10P -s 4608x2592 /dev/video1

RAW8 format, VC0:
 media-ctl --reset
 media-ctl -V '"msm_csid0":0[fmt:SRGGB8/4608x2592 field:none]'
 media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB8/4608x2592 field:none]'
 media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
 yavta -B capture-mplane --capture=3 -n 3 -f SRGGB8 -s 4608x2592 /dev/video0

Fixes: eebe6d00e9 ("media: camss: Add support for CSID hardware version Titan 170")
Cc: stable@vger.kernel.org
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27 09:39:54 +02:00
Bryan O'Donoghue
e655d1ae97 media: qcom: camss: Fix set CSI2_RX_CFG1_VC_MODE when VC is greater than 3
VC_MODE = 0 implies a two bit VC address.
VC_MODE = 1 is required for VCs with a larger address than two bits.

Fixes: eebe6d00e9 ("media: camss: Add support for CSID hardware version Titan 170")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27 09:39:54 +02:00
Bryan O'Donoghue
d8f7e1a60d media: qcom: camss: Fix invalid clock enable bit disjunction
define CSIPHY_3PH_CMN_CSI_COMMON_CTRL5_CLK_ENABLE BIT(7)

disjunction for gen2 ? BIT(7) : is a nop we are setting the same bit
either way.

Fixes: 4abb21309f ("media: camss: csiphy: Move to hardcode CSI Clock Lane number")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27 09:39:54 +02:00
Bryan O'Donoghue
b6e1bdca46 media: qcom: camss: Fix missing vfe_lite clocks check
check_clock doesn't account for vfe_lite which means that vfe_lite will
never get validated by this routine. Add the clock name to the expected set
to remediate.

Fixes: 7319cdf189 ("media: camss: Add support for VFE hardware version Titan 170")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27 09:39:54 +02:00
Bryan O'Donoghue
7f24d29135 media: qcom: camss: Fix VFE-480 vfe_disable_output()
vfe-480 is copied from vfe-17x and has the same racy idle timeout bug as in
17x.

Fix the vfe_disable_output() logic to no longer be racy and to conform
to the 17x way of quiescing and then resetting the VFE.

Fixes: 4edc8eae71 ("media: camss: Add initial support for VFE hardware version Titan 480")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27 09:39:54 +02:00
Bryan O'Donoghue
3143ad282f media: qcom: camss: Fix VFE-17x vfe_disable_output()
There are two problems with the current vfe_disable_output() routine.

Firstly we rightly use a spinlock to protect output->gen2.active_num
everywhere except for in the IDLE timeout path of vfe_disable_output().
Even if that is not racy "in practice" somehow it is by happenstance not
by design.

Secondly we do not get consistent behaviour from this routine. On
sc8280xp 50% of the time I get "VFE idle timeout - resetting". In this
case the subsequent capture will succeed. The other 50% of the time, we
don't hit the idle timeout, never do the VFE reset and subsequent
captures stall indefinitely.

Rewrite the vfe_disable_output() routine to

- Quiesce write masters with vfe_wm_stop()
- Set active_num = 0

remembering to hold the spinlock when we do so followed by

- Reset the VFE

Testing on sc8280xp and sdm845 shows this to be a valid fix.

Fixes: 7319cdf189 ("media: camss: Add support for VFE hardware version Titan 170")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27 09:39:54 +02:00
Bryan O'Donoghue
26bda3da00 media: qcom: camss: Fix vfe_get() error jump
Right now it is possible to do a vfe_get() with the internal reference
count at 1. If vfe_check_clock_rates() returns non-zero then we will
leave the reference count as-is and

run:
- pm_runtime_put_sync()
- vfe->ops->pm_domain_off()

skip:
- camss_disable_clocks()

Subsequent vfe_put() calls will when the ref-count is non-zero
unconditionally run:

- pm_runtime_put_sync()
- vfe->ops->pm_domain_off()
- camss_disable_clocks()

vfe_get() should not attempt to roll-back on error when the ref-count is
non-zero as the upper layers will still do their own vfe_put() operations.

vfe_put() will drop the reference count and do the necessary power
domain release, the cleanup jumps in vfe_get() should only be run when
the ref-count is zero.

[   50.095796] CPU: 7 PID: 3075 Comm: cam Not tainted 6.3.2+ #80
[   50.095798] Hardware name: LENOVO 21BXCTO1WW/21BXCTO1WW, BIOS N3HET82W (1.54 ) 05/26/2023
[   50.095799] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   50.095802] pc : refcount_warn_saturate+0xf4/0x148
[   50.095804] lr : refcount_warn_saturate+0xf4/0x148
[   50.095805] sp : ffff80000c7cb8b0
[   50.095806] x29: ffff80000c7cb8b0 x28: ffff16ecc0e3fc10 x27: 0000000000000000
[   50.095810] x26: 0000000000000000 x25: 0000000000020802 x24: 0000000000000000
[   50.095813] x23: ffff16ecc7360640 x22: 00000000ffffffff x21: 0000000000000005
[   50.095815] x20: ffff16ed175f4400 x19: ffffb4d9852942a8 x18: ffffffffffffffff
[   50.095818] x17: ffffb4d9852d4a48 x16: ffffb4d983da5db8 x15: ffff80000c7cb320
[   50.095821] x14: 0000000000000001 x13: 2e656572662d7265 x12: 7466612d65737520
[   50.095823] x11: 00000000ffffefff x10: ffffb4d9850cebf0 x9 : ffffb4d9835cf954
[   50.095826] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[   50.095829] x5 : ffff16f813fe3d08 x4 : 0000000000000000 x3 : ffff621e8f4d2000
[   50.095832] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff16ed32119040
[   50.095835] Call trace:
[   50.095836]  refcount_warn_saturate+0xf4/0x148
[   50.095838]  device_link_put_kref+0x84/0xc8
[   50.095843]  device_link_del+0x38/0x58
[   50.095846]  vfe_pm_domain_off+0x3c/0x50 [qcom_camss]
[   50.095860]  vfe_put+0x114/0x140 [qcom_camss]
[   50.095869]  csid_set_power+0x2c8/0x408 [qcom_camss]
[   50.095878]  pipeline_pm_power_one+0x164/0x170 [videodev]
[   50.095896]  pipeline_pm_power+0xc4/0x110 [videodev]
[   50.095909]  v4l2_pipeline_pm_use+0x5c/0xa0 [videodev]
[   50.095923]  v4l2_pipeline_pm_get+0x1c/0x30 [videodev]
[   50.095937]  video_open+0x7c/0x100 [qcom_camss]
[   50.095945]  v4l2_open+0x84/0x130 [videodev]
[   50.095960]  chrdev_open+0xc8/0x250
[   50.095964]  do_dentry_open+0x1bc/0x498
[   50.095966]  vfs_open+0x34/0x40
[   50.095968]  path_openat+0xb44/0xf20
[   50.095971]  do_filp_open+0xa4/0x160
[   50.095974]  do_sys_openat2+0xc8/0x188
[   50.095975]  __arm64_sys_openat+0x6c/0xb8
[   50.095977]  invoke_syscall+0x50/0x128
[   50.095982]  el0_svc_common.constprop.0+0x4c/0x100
[   50.095985]  do_el0_svc+0x40/0xa8
[   50.095988]  el0_svc+0x2c/0x88
[   50.095991]  el0t_64_sync_handler+0xf4/0x120
[   50.095994]  el0t_64_sync+0x190/0x198
[   50.095996] ---[ end trace 0000000000000000 ]---

Fixes: 779096916d ("media: camss: vfe: Fix runtime PM imbalance on error")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27 09:39:54 +02:00
Bryan O'Donoghue
f69791c397 media: qcom: camss: Fix genpd cleanup
Right now we never release the power-domains properly on the error path.
Add a routine to be reused for this purpose and appropriate jumps in
probe() to run that routine where necessary.

Fixes: 2f6f8af672 ("media: camss: Refactor VFE power domain toggling")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27 09:39:54 +02:00
Bryan O'Donoghue
b278080a89 media: qcom: camss: Fix V4L2 async notifier error path
Previously the jump label err_cleanup was used higher in the probe()
function to release the async notifier however the async notifier
registration was moved later in the code rendering the previous four jumps
redundant.

Rename the label from err_cleanup to err_v4l2_device_unregister to capture
what the jump does.

Fixes: 51397a4ec75d ("media: qcom: Initialise V4L2 async notifier later")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: fix old name in commit log: err_v4l2_device_register -> err_v4l2_device_unregister]
2023-09-27 09:39:53 +02:00
Bryan O'Donoghue
7405116519 media: qcom: camss: Fix pm_domain_on sequence in probe
We need to make sure camss_configure_pd() happens before
camss_register_entities() as the vfe_get() path relies on the pointer
provided by camss_configure_pd().

Fix the ordering sequence in probe to ensure the pointers vfe_get() demands
are present by the time camss_register_entities() runs.

In order to facilitate backporting to stable kernels I've moved the
configure_pd() call pretty early on the probe() function so that
irrespective of the existence of the old error handling jump labels this
patch should still apply to -next circa Aug 2023 to v5.13 inclusive.

Fixes: 2f6f8af672 ("media: camss: Refactor VFE power domain toggling")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-27 09:39:53 +02:00
Fabio Estevam
16fdcec808 dt-bindings: gpio: fsl-imx-gpio: Document imx25 and imx27
fsl,imx25-gpio and fsl,imx27-gpio are not documented, causing schema
warnings.

fsl,imx25-gpio is compatible with fsl,imx35-gpio and fsl,imx27-gpio
is compatible with fsl,imx21-gpio.

Document them accordingly.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-09-27 09:23:51 +02:00
Wenhua Lin
26d9e5640d gpio: pmic-eic-sprd: Add can_sleep flag for PMIC EIC chip
The drivers uses a mutex and I2C bus access in its PMIC EIC chip
get implementation. This means these functions can sleep and the PMIC EIC
chip should set the can_sleep property to true.

This will ensure that a warning is printed when trying to get the
value from a context that potentially can't sleep.

Fixes: 348f3cde84 ("gpio: Add Spreadtrum PMIC EIC driver support")
Signed-off-by: Wenhua Lin <Wenhua.Lin@unisoc.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-09-27 09:12:09 +02:00
Yinbo Zhu
3feb70a617 gpio: loongson: add more gpio chip support
This patch was to add loongson 2k0500, 2k2000 and 3a5000 gpio chip
driver support and define inten_offset attibute to enable gpio chip
interrupt.

Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-09-27 09:06:50 +02:00
Yinbo Zhu
1b83a90bd1 gpio: dt-bindings: add more loongson gpio chip support
This patch was to add loongson 2k0500, 2k2000 and 3a5000 gpio chip
dt-bindings support in yaml file.

Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-09-27 09:06:27 +02:00
Luca Weiss
aa01dd7bc1 cpufreq: Add QCM6490 to cpufreq-dt-platdev blocklist
The Qualcomm QCM6490 platform uses the qcom-cpufreq-hw driver, so add it
to the cpufreq-dt-platdev driver's blocklist.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-09-27 12:26:01 +05:30
Sumit Gupta
bae8222a6c cpufreq: tegra194: fix warning due to missing opp_put
Fix the warning due to missing dev_pm_opp_put() call and hence
wrong refcount value. This causes below warning message when
trying to remove the module.

 Call trace:
  dev_pm_opp_put_opp_table+0x154/0x15c
  dev_pm_opp_remove_table+0x34/0xa0
  _dev_pm_opp_cpumask_remove_table+0x7c/0xbc
  dev_pm_opp_of_cpumask_remove_table+0x10/0x18
  tegra194_cpufreq_exit+0x24/0x34 [tegra194_cpufreq]
  cpufreq_remove_dev+0xa8/0xf8
  subsys_interface_unregister+0x90/0xe8
  cpufreq_unregister_driver+0x54/0x9c
  tegra194_cpufreq_remove+0x18/0x2c [tegra194_cpufreq]
  platform_remove+0x24/0x74
  device_remove+0x48/0x78
  device_release_driver_internal+0xc8/0x160
  driver_detach+0x4c/0x90
  bus_remove_driver+0x68/0xb8
  driver_unregister+0x2c/0x58
  platform_driver_unregister+0x10/0x18
  tegra194_ccplex_driver_exit+0x14/0x1e0 [tegra194_cpufreq]
  __arm64_sys_delete_module+0x184/0x270

Fixes: f41e1442ac ("cpufreq: tegra194: add OPP support and set bandwidth")
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
[ Viresh: Add a blank line ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2023-09-27 12:26:01 +05:30
Linus Walleij
ff2cbd758d gpio: Rewrite IXP4xx GPIO bindings in schema
This rewrites the IXP4xx GPIO bindings to use YAML schema,
and adds two new properties to enable fixed clock output on
pins 14 and 15.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-09-27 08:55:55 +02:00
Chengfeng Ye
9e8bc2dda5 gpio: timberdale: Fix potential deadlock on &tgpio->lock
As timbgpio_irq_enable()/timbgpio_irq_disable() callback could be
executed under irq context, it could introduce double locks on
&tgpio->lock if it preempts other execution units requiring
the same locks.

timbgpio_gpio_set()
--> timbgpio_update_bit()
--> spin_lock(&tgpio->lock)
<interrupt>
   --> timbgpio_irq_disable()
   --> spin_lock_irqsave(&tgpio->lock)

This flaw was found by an experimental static analysis tool I am
developing for irq-related deadlock.

To prevent the potential deadlock, the patch uses spin_lock_irqsave()
on &tgpio->lock inside timbgpio_gpio_set() to prevent the possible
deadlock scenario.

Signed-off-by: Chengfeng Ye <dg573847474@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-09-27 08:51:28 +02:00
Karol Wachowski
645d694559 accel/ivpu: Use cached buffers for FW loading
Create buffers with cache coherency on the CPU side (write-back) while
disabling snooping on the VPU side. These buffers require an explicit
cache flush after each CPU-side modification.

Configuring pages as write-combined may introduce significant delays,
potentially taking hundreds of milliseconds for 64 MB buffers.

Added internal DRM_IVPU_BO_NOSNOOP mask which disables snooping on the
VPU side. Allocate FW runtime memory buffer (64 MB) as cached with
snooping-disabled.

This fixes random long FW loading times and boot params memory
corruption on warmboot (due to missed wmb).

Fixes: 02d5b0aacd ("accel/ivpu: Implement firmware parsing and booting")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230926120943.GD846747@linux.intel.com
2023-09-27 07:40:43 +02:00
Karol Wachowski
09bb81cf24 accel/ivpu/40xx: Fix missing VPUIP interrupts
Move sequence of masking and unmasking global interrupts from buttress
interrupt handler to generic one that handles both VPUIP and BTRS
interrupts.

Unmasking global interrupts will re-trigger MSI for any pending interrupts.
Lack of this sequence can randomly cause to miss any VPUIP interrupt that
comes after reading VPU_40XX_HOST_SS_ICB_STATUS_0 and before clearing
all active interrupt sources.

Fixes: 79cdc56c4a ("accel/ivpu: Add initial support for VPU 4")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-6-stanislaw.gruszka@linux.intel.com
2023-09-27 07:40:37 +02:00
Karol Wachowski
ec3e3adc6d accel/ivpu/40xx: Disable frequency change interrupt
Do not enable frequency change interrupt on 40xx as it might
lead to an interrupt storm in current design.

FREQ_CHANGE interrupt is triggered on D0I2 entry which will cause
KMD to check VPU interrupt sources by reading VPUIP registers.
Access to those registers will toggle necessary clocks and trigger
another FREQ_CHANGE interrupt possibly ending in an infinite loop.

FREQ_CHANGE interrupt has only debug purposes and can be permanently
disabled.

Fixes: 79cdc56c4a ("accel/ivpu: Add initial support for VPU 4")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-5-stanislaw.gruszka@linux.intel.com
2023-09-27 07:40:30 +02:00
Karol Wachowski
6c3f2f90cc accel/ivpu/40xx: Ensure clock resource ownership Ack before Power-Up
We need to wait for the CLOCK_RESOURCE_OWN_ACK bit to be set
after configuring the workpoint. This step ensures that the VPU
microcontroller clock is actively toggling and ready for operation.

Previously, we relied solely on the READY bit in the VPU_STATUS
register, which indicated the completion of the workpoint download.
However, this approach was insufficient, as the READY bit could be set
while the device was still running on a sideband clock until the PLL
locked. To guarantee that the PLL is locked and the device is running on
the main clock source, we now wait for the CLOCK_RESOURCE_OWN_ACK before
proceeding with the remainder of the power-up sequence.

Fixes: 79cdc56c4a ("accel/ivpu: Add initial support for VPU 4")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-4-stanislaw.gruszka@linux.intel.com
2023-09-27 07:40:23 +02:00
Jacek Lawrynowicz
0026525550 accel/ivpu: Don't flood dmesg with VPU ready message
Use ivpu_dbg() to print the VPU ready message so it doesn't pollute
the dmesg.

Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-3-stanislaw.gruszka@linux.intel.com
2023-09-27 07:40:17 +02:00
Stanislaw Gruszka
b0873eead1 accel/ivpu: Do not use wait event interruptible
If we receive signal when waiting for IPC message response in
ivpu_ipc_receive() we return error and continue to operate.
Then the driver can send another IPC messages and re-use occupied
slot of the message still processed by the firmware. This can result
in corrupting firmware memory and following FW crash with messages:

[ 3698.569719] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_send_receive_internal(): IPC receive failed: type 0x1103, ret -512
[ 3698.569747] intel_vpu 0000:00:0b.0: [drm] ivpu_jsm_unregister_db(): Failed to unregister doorbell 3: -512
[ 3698.569756] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_tx_prepare(): IPC message vpu:0x88980000 not released by firmware
[ 3698.569763] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_tx_prepare(): JSM message vpu:0x88980040 not released by firmware
[ 3698.570234] intel_vpu 0000:00:0b.0: [drm] ivpu_ipc_send_receive_internal(): IPC receive failed: type 0x110e, ret -512
[ 3698.570318] intel_vpu 0000:00:0b.0: [drm] *ERROR* ivpu_mmu_dump_event(): MMU EVTQ: 0x10 (Translation fault) SSID: 0 SID: 3, e[2] 00000000, e[3] 00000208, in addr: 0x88988000, fetch addr: 0x0

To fix the issue don't use interruptible variant of wait event to
allow firmware to finish IPC processing.

Fixes: 5d7422cfb4 ("accel/ivpu: Add IPC driver and JSM messages")
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230925121137.872158-2-stanislaw.gruszka@linux.intel.com
2023-09-27 07:39:46 +02:00
Yang Jihong
bb2e04d449 perf bench messaging: Kill child processes when exit abnormally in process mode
When exit abnormally in process mode, customize SIGINT and SIGTERM signal
handler to kill the forked child processes.

Before:

  # perf bench sched messaging -l 1000000 -g 1 &
  [1] 8519
  # # Running 'sched/messaging' benchmark:

  # pgrep sched-messaging | wc -l
  41
  # kill -15 8519
  [1]+  Terminated              perf bench sched messaging -l 1000000 -g 1
  # pgrep sched-messaging | wc -l
  40

After:

  # perf bench sched messaging -l 1000000 -g 1 &
  [1] 8472
  # # Running 'sched/messaging' benchmark:

  # pgrep sched-messaging | wc -l
  41
  # kill -15 8472
  [1]+  Exit 1                  perf bench sched messaging -l 1000000 -g 1
  # pgrep sched-messaging | wc -l
  0

Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20230923093037.961232-5-yangjihong1@huawei.com
[ namhyung: fix a whitespace ]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-09-26 21:47:12 -07:00
Yang Jihong
07f3e6cf85 perf bench messaging: Store chlid process pid when creating worker for process mode
To save pid of child processes when creating worker:
1. The messaging worker is changed to `union` type to store thread id and
   process pid.
2. Save child process pid in create_process_worker().
3. Rename `pth_tab` as `work_tab`.

Test result:

  # perf bench sched messaging
  # Running 'sched/messaging' benchmark:
  # 20 sender and receiver processes per group
  # 10 groups == 400 processes run

       Total time: 6.744 [sec]
  # perf bench sched messaging -t
  # Running 'sched/messaging' benchmark:
  # 20 sender and receiver threads per group
  # 10 groups == 400 threads run

       Total time: 5.788 [sec]

Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20230923093037.961232-4-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-09-26 21:47:12 -07:00
Yang Jihong
5d2050453d perf bench messaging: Factor out create_worker()
Refactor the create_worker() helper:
1. Modify the return value and use pthread pointer as a parameter to
   facilitate value assignment in create_worker().
2. The thread worker creation and process worker creation are abstracted
   into independent helpers.

No functional change.

Test result:

  # perf bench sched messaging
  # Running 'sched/messaging' benchmark:
  # 20 sender and receiver processes per group
  # 10 groups == 400 processes run

       Total time: 6.332 [sec]
  # perf bench sched messaging -t
  # Running 'sched/messaging' benchmark:
  # 20 sender and receiver threads per group
  # 10 groups == 400 threads run

       Total time: 5.545 [sec]

Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20230923093037.961232-3-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-09-26 21:47:12 -07:00
Yang Jihong
8870261a70 perf bench messaging: Fix coding style issues for sched-messaging
Fixed several code style issues in sched-messaging:
1. Use one space around "-" and "+" operators.
2. When a long line is broken, the operator is at the end of the line.

Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20230923093037.961232-2-yangjihong1@huawei.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-09-26 21:47:12 -07:00
Athira Rajeev
cefff1f33d tests/shell: Fix shellcheck warnings for SC2153 in multiple scripts
Running shellcheck on some of the shell scripts, throws
below warning on shellcheck v0.6. Example:

   In tests/shell/coresight/asm_pure_loop.sh line 14:
   DATA="$DATD/perf-$TEST-$DATV.data"
          ^---^ SC2153: Possible misspelling: DATD may not be assigned, but DATA is.

Here, DATD is exported from "lib/coresight.sh" and this
warning can be ignored. Use "shellcheck disable=" to ignore
this check.

Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230907171540.36736-4-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-09-26 21:47:12 -07:00
Athira Rajeev
55312ca752 tests/shell: Fix shellcheck issues in tests/shell/stat+shadow_stat.sh tetscase
Running shellcheck on stat+shadow_stat.sh generates below
warning

    In tests/shell/stat+csv_summary.sh line 26:
    while read _num _event _run _pct
           ^--^ SC2034: _num appears unused. Verify use (or export if used externally).
                ^----^ SC2034: _event appears unused. Verify use (or export if used externally).
                       ^--^ SC2034: _run appears unused. Verify use (or export if used externally).
                            ^--^ SC2034: _pct appears unused. Verify use (or export if used externally).

This variable is intentionally unused since it is
needed to parse through the output. commit used "_"
as a prefix for this throw away variable. But this
stil shows warning with shellcheck v0.6. Fix this
by only using "_" instead of prefix and variable name.

Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230907171540.36736-3-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-09-26 21:47:12 -07:00
Athira Rajeev
35de80c709 tests/shell: Fix shellcheck SC1090 to handle the location of sourced files
Running shellcheck on some of the shell scripts throws
below error:

	In tests/shell/coresight/unroll_loop_thread_10.sh line 8:
	. "$(dirname $0)"/../lib/coresight.sh
	  ^-- SC1090: Can't follow non-constant source. Use a directive to specify location.

This happens on shellcheck version "0.6.0". Fix shellcheck
warning for SC1090 using "shellcheck source="i option to mention
the location of sourced files.

Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Cc: maddy@linux.ibm.com
Cc: disgoel@linux.vnet.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230907171540.36736-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-09-26 21:47:12 -07:00
Colin Ian King
cd0f9e3f7e perf kwork: Fix spelling mistake "Captuer" -> "Capture"
There is a spelling mistake in a pr_debug message. Fix it.
(I didn't see this one in the first spell check scan I ran).

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: kernel-janitors@vger.kernel.org
Link: https://lore.kernel.org/r/20230925055037.18089-1-colin.i.king@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-09-26 21:47:11 -07:00
Ian Rogers
f9cdeb58a9 perf evlist: Avoid frequency mode for the dummy event
Dummy events are created with an attribute where the period and freq
are zero. evsel__config will then see the uninitialized values and
initialize them in evsel__default_freq_period. As fequency mode is
used by default the dummy event would be set to use frequency
mode. However, this has no effect on the dummy event but does cause
unnecessary timers/interrupts. Avoid this overhead by setting the
period to 1 for dummy events.

evlist__add_aux_dummy calls evlist__add_dummy then sets freq=0 and
period=1. This isn't necessary after this change and so the setting is
removed.

From Stephane:

The dummy event is not counting anything. It is used to collect mmap
records and avoid a race condition during the synthesize mmap phase of
perf record. As such, it should not cause any overhead during active
profiling. Yet, it did. Because of a bug the dummy event was
programmed as a sampling event in frequency mode. Events in that mode
incur more kernel overheads because on timer tick, the kernel has to
look at the number of samples for each event and potentially adjust
the sampling period to achieve the desired frequency. The dummy event
was therefore adding a frequency event to task and ctx contexts we may
otherwise not have any, e.g.,

  perf record -a -e cpu/event=0x3c,period=10000000/.

On each timer tick the perf_adjust_freq_unthr_context() is invoked and
if ctx->nr_freq is non-zero, then the kernel will loop over ALL the
events of the context looking for frequency mode ones. In doing, so it
locks the context, and enable/disable the PMU of each hw event. If all
the events of the context are in period mode, the kernel will have to
traverse the list for nothing incurring overhead. The overhead is
multiplied by a very large factor when this happens in a guest kernel.
There is no need for the dummy event to be in frequency mode, it does
not count anything and therefore should not cause extra overhead for
no reason.

Fixes: 5bae025023 ("perf evlist: Introduce perf_evlist__new_dummy constructor")
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20230916035640.1074422-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-09-26 21:43:20 -07:00
Charles Han
c87b8cc816 perf vendors events: Remove repeated word in comments
Remove the repeated word "of" in comments.

Signed-off-by: Charles Han <hanchunchao@inspur.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: james.clark@arm.com
Cc: nick.forrington@arm.com
Cc: leo.yan@linaro.org
Cc: mike.leach@linaro.org
Cc: john.g.garry@oracle.com
Cc: ilkka@os.amperecomputing.com
Link: https://lore.kernel.org/r/20230918033623.159213-1-hanchunchao@inspur.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-09-26 21:43:20 -07:00
Ilkka Koskinen
59faeaf80d perf vendor events arm64: Fix for AmpereOne metrics
This patch addresses review comments that were given for
705ed54914 ("perf vendor events arm64: Add AmpereOne metrics")
but didn't make it to the original patch [1][2]

Changes include: A fix for backend_memory formula, use of standard metrics
when possible, using #slots, renaming metrics to avoid spaces in the names,
and cleanup.

[1] https://lore.kernel.org/linux-perf-users/e9bdacb-a231-36af-6a2e-6918ee7effa@os.amperecomputing.com/
[2] https://lore.kernel.org/linux-perf-users/20230826192352.3043220-1-ilkka@os.amperecomputing.com/

Fixes: 705ed54914 ("perf vendor events arm64: Add AmpereOne metrics")
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Dave Kleikamp <dave.kleikamp@oracle.com>
Cc: John Garry <john.g.garry@oracle.com>
Cc: D Scott Phillips <scott@os.amperecomputing.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20230920061839.2437413-1-ilkka@os.amperecomputing.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-09-26 21:43:20 -07:00
Wyes Karny
48a3adcf47 perf pmu: Fix perf stat output with correct scale and unit
The perf_pmu__parse_* functions for the sysfs files of pmu event’s
scale, unit, per-pkg and snapshot were updated in commit 7b723dbb96
("perf pmu: Be lazy about loading event info files from sysfs").
However, the paths for these sysfs files were incorrect. This resulted
in perf stat reporting values with wrong scaling and missing units. This
is fixed by correcting the paths for these sysfs files.

Before this fix:

 $sudo perf stat -e power/energy-pkg/ -- sleep 2

 Performance counter stats for 'system wide':

   351,217,188,864      power/energy-pkg/

          2.004127961 seconds time elapsed

After this fix:

 $sudo perf stat -e power/energy-pkg/ -- sleep 2

 Performance counter stats for 'system wide':

             80.58 Joules power/energy-pkg/

 	     2.004009749 seconds time elapsed

Fixes: 7b723dbb96 ("perf pmu: Be lazy about loading event info files from sysfs")
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: ravi.bangoria@amd.com
Cc: sandipan.das@amd.com
Cc: james.clark@arm.com
Cc: kan.liang@linux.intel.com
Link: https://lore.kernel.org/r/20230920122349.418673-1-wyes.karny@amd.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-09-26 21:41:50 -07:00
Danilo Krummrich
69390f3528 MAINTAINERS: update nouveau maintainers
Since I will continue to work on Nouveau consistently, also beyond my
former and still ongoing VM_BIND/EXEC work, add myself to the list of
Nouveau maintainers.

Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230926014913.7721-1-dakr@redhat.com
2023-09-27 13:53:42 +10:00
Justin Stitt
078a2ead54 selftests/rseq: fix kselftest Clang build warnings
When building with Clang, I am getting many warnings from the selftests/rseq tree.

Here's one such example from rseq tree:
|  param_test.c🔢10: error: address argument to atomic operation must be a pointer to _Atomic type ('intptr_t *' (aka 'long *') invalid)
|   1234 |         while (!atomic_load(&args->percpu_list_ptr)) {}
|        |                 ^           ~~~~~~~~~~~~~~~~~~~~~~
|  /usr/local/google/home/justinstitt/repos/tc-build/build/llvm/final/lib/clang/18/include/stdatomic.h:140:29: note: expanded from macro 'atomic_load'
|    140 | #define atomic_load(object) __c11_atomic_load(object, __ATOMIC_SEQ_CST)
|        |                             ^                 ~~~~~~

Use compiler builtins `__atomic_load_n()` and `__atomic_store_n()` with
accompanying __ATOMIC_ACQUIRE and __ATOMIC_RELEASE, respectively. This
will fix the warnings because the compiler builtins do not expect their
arguments to have _Atomic type. This should also make TSAN happier.

Link: https://github.com/ClangBuiltLinux/linux/issues/1698
Link: https://github.com/ClangBuiltLinux/continuous-integration2/issues/61
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-09-26 19:24:57 -06:00
Juntong Deng
18378b0e49 selftests/damon: Add executable permission to test scripts
When running the test for the damon subsystem, there are a lot of
warnings because test scripts do not have executable permission,
for example:

Warning: file debugfs_attrs.sh is not executable
Warning: file debugfs_schemes.sh is not executable
Warning: file debugfs_target_ids.sh is not executable
...

This patch adds executable permission to test scripts to eliminate
these warnings.

Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-09-26 19:24:44 -06:00
Juntong Deng
6f874fa021 selftests: Fix wrong TARGET in kselftest top level Makefile
The 'uevents' subdirectory does not exist in tools/testing/selftests/
and adding 'uevents' to the TARGETS list results in the following error:

make[1]: Entering directory 'xx/tools/testing/selftests/uevents'
make[1]: *** No targets specified and no makefile found. Stop.
make[1]: Leaving directory 'xx/tools/testing/selftests/uevents'

What actually exists in tools/testing/selftests/ is the 'uevent'
subdirectory.

Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-09-26 18:47:37 -06:00
Oleksandr Tymoshenko
be210c6d35 ima: Finish deprecation of IMA_TRUSTED_KEYRING Kconfig
The removal of IMA_TRUSTED_KEYRING made IMA_LOAD_X509
and IMA_BLACKLIST_KEYRING unavailable because the latter
two depend on the former. Since IMA_TRUSTED_KEYRING was
deprecated in favor of INTEGRITY_TRUSTED_KEYRING use it
as a dependency for the two Kconfigs affected by the
deprecation.

Fixes: 5087fd9e80 ("ima: Remove deprecated IMA_TRUSTED_KEYRING Kconfig")
Signed-off-by: Oleksandr Tymoshenko <ovt@google.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2023-09-26 17:34:34 -04:00
Mario Limonciello
90295cf73b drm/amd: Drop error message about failing to load DMUB firmware
The error path for DMUB firmware loading is unnecessarily noisy.
When a firmware is missing 3 errors show up:
```
amdgpu 0000:07:00.0: Direct firmware load for amdgpu/green_sardine_dmcub.bin failed with error -2
[drm:dm_early_init [amdgpu]] *ERROR* DMUB firmware loading failed: -19
[drm:amdgpu_device_init [amdgpu]] *ERROR* early_init of IP block <dm> failed -19
```

The error code for the device init is bubbled up already, remove the
second one.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26 17:00:23 -04:00
Philip Yang
eb3c357bcb drm/amdkfd: Handle errors from svm validate and map
If new range is splited to multiple pranges with max_svm_range_pages
alignment and added to update_list, svm validate and map should keep
going after error to make sure prange->mapped_to_gpu flag is up to date
for the whole range.

svm validate and map update set prange->mapped_to_gpu after mapping to
GPUs successfully, otherwise clear prange->mapped_to_gpu flag (for
update mapping case) instead of setting error flag, we can remove
the redundant error flag to simpliy code.

Refactor to remove goto and update prange->mapped_to_gpu flag inside
svm_range_lock, to guarant we always evict queues or unmap from GPUs if
there are invalid ranges.

After svm validate and map return error -EAGIN, the caller retry will
update the mapping for the whole range again.

Fixes: c22b044070 ("drm/amdkfd: flag added to handle errors from svm validate and map")
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: James Zhu <james.zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26 17:00:23 -04:00
Le Ma
21e43386ae drm/amd/pm: add xgmi_plpd_policy sysfs node for user to change plpd policy
Add xgmi_plpd_policy sysfs node for users to check and select xgmi
per-link power down policy:
  - arg 0: disallow plpd
  - arg 1: default policy
  - arg 2: optimized policy

v2: split from smu v13.0.6 code and miscellaneous updates
v3: add usage comments around set/get functions

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26 17:00:23 -04:00
Le Ma
d07f1c20dd drm/amd/pm: add xgmi plpd mode selecting interface for smu v13.0.6
Add the interface to change xgmi per-link power down policy.

v2: split from sysfs interface code and miscellaneous updates
v3: check against XGMI_PLPD_DEFAULT/XGMI_PLPD_OPTIMIZED and
    pass PPSMC param

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-26 17:00:23 -04:00