Commit graph

1,233,462 commits

Author SHA1 Message Date
Tim Harvey
2af4391202 ARM: dts: imx6qdl-gw5904: add internal mdio nodes
Complete the switch definition by adding the internal mdio nodes.

This does not change behavior on Linux but is required if the dt is used
for U-Boot which requires the internal PHY ports to be defined for
DSA.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25 08:50:37 +08:00
Dmitry Baryshkov
8c17cec634 ARM: dts: imx: add support for the ATM0700D4 panel attached to sk-imx53
The SK-ATM0700D4-Plug is an extension board (provided by the same
manufacturer, [1]) which can be connected to the SK-IMX53 panel kit. The
panel can be connected either using the RGB parallel bus or using the
LVDS connector (recommended). Add DT files describing this "shield",
both RGB and LVDS connections.

[1] http://starterkit.ru/html/index.php?name=shop&op=view&id=64

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25 08:43:17 +08:00
Frank Li
ccd58dad0b arm64: dts: imx93-evk: add uart5
Enable uart5 for imx93-evk board.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25 08:38:41 +08:00
Frank Li
c7c4825bbe arm64: dts: imx93: add dma support for lpuart[1..8]
Add dma support for lpuart[1..8].

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25 08:38:41 +08:00
Frank Li
d34d2aa594 arm64: dts: imx93: add edma1 and edma2
Add edma<n> nodes.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25 08:38:41 +08:00
Alexander Stein
5cd602fca7 arm64: dts: imx8mq-tqma8mq-mba8mx: Add LVDS overlay
This overlay enables the DSI-LVDS display chain and configures the
actual panel compatible.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25 08:38:41 +08:00
Alexander Stein
21ff74b8ff arm64: dts: imx8mn-tqma8mqnl-mba8mx: Add LVDS overlay
This overlay enables the DSI-LVDS display chain and configures the
actual panel compatible. Also add the DSIM supply voltages.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25 08:38:41 +08:00
Alexander Stein
6975bc28bf arm64: dts: imx8mm-tqma8mqml-mba8mx: Add LVDS overlay
This overlay enables the DSI-LVDS display chain and configures the
actual panel compatible. Also add the DSIM supply voltages.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25 08:38:41 +08:00
Alexander Stein
c03bff9777 arm64: dts: mba8mx: Add DSI-LVDS bridge nodes
This adds the DSI-LVDS bridge including the regulator, backlight and
an unspecified panel. It is expected to set the compatible when the
display chain is enabled.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25 08:38:41 +08:00
Fabio Estevam
b9b99cef37 arm64: dts: imx8qm-apalis: Remove invalid FEC property
The 'fsl,rgmii_txc_dly' is not a valid property.

Remove it to fix the following schema warning:

imx8qm-apalis-ixora-v1.1.dtb: ethernet@5b040000: Unevaluated properties are not allowed ('fsl,rgmii_txc_dly' was unexpected)
	from schema $id: http://devicetree.org/schemas/net/fsl,fec.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25 08:38:41 +08:00
Fabio Estevam
b98f0bee19 arm64: dts: imx8mq-thor96: Fix sdio-pwrseq GPIO property
As per mmc-pwrseq-simple.yaml, the correct way to describe the GPIO
is by using the 'reset-gpios' property.

Change it accordingly to fix the following schema warning:

imx8mq-thor96.dtb: sdio-pwrseq: 'gpio' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/mmc/mmc-pwrseq-simple.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25 08:38:40 +08:00
Fabio Estevam
fc03e8195d arm64: dts: imx8mq-pico-pi: Fix PMIC properties
Pass the required '#clock-cells' property and remove the invalid
'interrupt-names' property to fix the following schema warnings:

imx8mq-pico-pi.dtb: pmic@4b: '#clock-cells' is a required property
	from schema $id: http://devicetree.org/schemas/mfd/rohm,bd71837-pmic.yaml#
imx8mq-pico-pi.dtb: pmic@4b: 'interrupt-names' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/mfd/rohm,bd71837-pmic.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25 08:38:40 +08:00
Fabio Estevam
53f7d469de arm64: dts: imx8mq-librem5: Fix gpio-hog property
The 'lane-mapping' property is not a valid one and cause the following
schema warning:

imx8mq-librem5-r2.dtb: pmic-5v-hog: 'lane-mapping' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/gpio/gpio-hog.yaml#

Replace it with 'line-name'.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25 08:38:40 +08:00
Marek Vasut
929dcf7dce arm64: dts: imx8mp: Switch PCIe to HSIO PLL on i.MX8MP DHCOM PDK2 and generate clock from SoC
The PDK2 carrier board had to be manually patched to obtain working PCIe
with the i.MX8MP DHCOM SoM so far, because the PCIe clock generator has
not been connected to the PCIe block REF_PAD_CLK inputs.

Switch to use of HSIO PLL as the clock source for the PCIe block instead,
and use the REF_PAD_CLK as outputs to generate PCIe clock from the SoC.
This way, it is not necessary to patch the PDK2 in any way to obtain a
working PCIe.

Note that PDK3 has PCIe clock generator always connected to REF_PAD_CLK
and is not affected.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25 08:38:40 +08:00
Fabio Estevam
5e7de0aafc arm64: dts: imx8dxl-evk: Remove invalid SPI property
'pinctrl-assert-gpios' is not a valid property.

Remove it to fix the following schema warning:

imx8dxl-evk.dtb: spi@5a030000: Unevaluated properties are not allowed ('pinctrl-assert-gpios' was unexpected)

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25 08:38:40 +08:00
Fabio Estevam
eb2350fd60 arm64: dts: imx8mm-phg: Disable flexspi
The imx8mm-tqma8mqml SoM used on the PHG board does not come with
the QSPI flash populated, so disable it to avoid the following
error message:

spi-nor spi3.0: unrecognized JEDEC id bytes: 00 00 00 00 00 00

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25 08:38:40 +08:00
Tim Harvey
7d7f27be8f arm64: dts: imx8mp: add imx8mp-venice-gw74xx-imx219 overlay for rpi v2 camera
Add support for the RaspberryPi Camera v2 which is an IMX219 8MP module:
 - https://datasheets.raspberrypi.com/camera/camera-v2-schematics.pdf
 - has its own on-board 24MHz osc so no clock required from baseboard
 - pin 11 enables 1.8V and 2.8V LDO which is connected to
   GW74xx MIPI_GPIO4 (IMX8MP GPIO1_IO4) so we use this as a gpio

Support is added via a device-tree overlay.

The IMX219 supports RAW8/RAW10 image formats.

Example configuration:
media-ctl -l "'imx219 3-0010':0->'csis-32e40000.csi':0[1]"
media-ctl -v -V "'imx219 3-0010':0 [fmt:SRGGB8/640x480 field:none]"
media-ctl -v -V "'crossbar':0 [fmt:SRGGB8/640x480 field:none]"
media-ctl -v -V "'mxc_isi.0':0 [fmt:SRGGB8/640x480 field:none]"
v4l2-ctl --set-fmt-video=width=640,height=480,pixelformat=RGGB
v4l2-ctl --stream-mmap --stream-to=frame.raw --stream-count=1
convert -size 640x480 -depth 8 gray:frame.raw frame.png
gst-launch-1.0 v4l2src ! \
  video/x-bayer,format=rggb,width=640,height=480,framerate=10/1 ! \
  bayer2rgb ! fbdevsink

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25 08:38:40 +08:00
Ming Qian
5943de495b arm64: dts: imx8-ss-img: Assign slot for imx jpeg encoder/decoder
assign a single slot,
configure interrupt and power domain only for 1 slot,
not for the all 4 slots.

Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25 08:38:24 +08:00
Alexander Stein
f5f1783784 arm64: defconfig: Enable Samsung DSIM driver
This driver, together with GPIO delay, is required for TQMa8MxML based
boards to use LVDS output.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-09-25 08:19:51 +08:00
Linus Torvalds
6465e260f4 Linux 6.6-rc3 v6.6-rc3 2023-09-24 14:31:13 -07:00
Linus Torvalds
8a511e7efc ARM:
* Fix EL2 Stage-1 MMIO mappings where a random address was used
 
 * Fix SMCCC function number comparison when the SVE hint is set
 
 RISC-V:
 
 * Fix KVM_GET_REG_LIST API for ISA_EXT registers
 
 * Fix reading ISA_EXT register of a missing extension
 
 * Fix ISA_EXT register handling in get-reg-list test
 
 * Fix filtering of AIA registers in get-reg-list test
 
 x86:
 
 * Fixes for TSC_AUX virtualization
 
 * Stop zapping page tables asynchronously, since we don't
   zap them as often as before
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmUQU5YUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroNcdwf/X8eHQ5yfAE0J70xs4VZ1z7B8i77q
 P54401z/q0FyQ4yyTHwbUv/FgVYscZ0efYogrkd3uuoPNtLmN2xKj1tM95A2ncP/
 v318ljevZ0FWZ6J471Xu9MM3u15QmjC3Wai9z6IP4tz0S2rUhOYTJdFqlNf6gQSu
 P8n9l2j3ZLAiUNizXa8M7350gCUFCBi37dvLLVTYOxbu17hZtmNjhNpz5G7YNc9y
 zmJIJh30ZnMGUgMylLfcW0ZoqQFNIkNg3yyr9YjY68bTW5aspXdhp9u0zI+01xYF
 sT+tOXBPPLi9MBuckX+oLMsvNXEZWxos2oMow3qziMo83neG+jU+WhjLHg==
 =+sqe
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
"ARM:

   - Fix EL2 Stage-1 MMIO mappings where a random address was used

   - Fix SMCCC function number comparison when the SVE hint is set

  RISC-V:

   - Fix KVM_GET_REG_LIST API for ISA_EXT registers

   - Fix reading ISA_EXT register of a missing extension

   - Fix ISA_EXT register handling in get-reg-list test

   - Fix filtering of AIA registers in get-reg-list test

  x86:

   - Fixes for TSC_AUX virtualization

   - Stop zapping page tables asynchronously, since we don't zap them as
     often as before"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: SVM: Do not use user return MSR support for virtualized TSC_AUX
  KVM: SVM: Fix TSC_AUX virtualization setup
  KVM: SVM: INTERCEPT_RDTSCP is never intercepted anyway
  KVM: x86/mmu: Stop zapping invalidated TDP MMU roots asynchronously
  KVM: x86/mmu: Do not filter address spaces in for_each_tdp_mmu_root_yield_safe()
  KVM: x86/mmu: Open code leaf invalidation from mmu_notifier
  KVM: riscv: selftests: Selectively filter-out AIA registers
  KVM: riscv: selftests: Fix ISA_EXT register handling in get-reg-list
  RISC-V: KVM: Fix riscv_vcpu_get_isa_ext_single() for missing extensions
  RISC-V: KVM: Fix KVM_GET_REG_LIST API for ISA_EXT registers
  KVM: selftests: Assert that vasprintf() is successful
  KVM: arm64: nvhe: Ignore SVE hint in SMCCC function ID
  KVM: arm64: Properly return allocated EL2 VA from hyp_alloc_private_va_range()
2023-09-24 14:14:35 -07:00
Linus Torvalds
5edc6bb321 Tracing fixes for 6.6-rc2:
- Fix the "bytes" output of the per_cpu stat file
   The tracefs/per_cpu/cpu*/stats "bytes" was giving bogus values as the
   accounting was not accurate. It is suppose to show how many used bytes are
   still in the ring buffer, but even when the ring buffer was empty it would
   still show there were bytes used.
 
 - Fix a bug in eventfs where reading a dynamic event directory (open) and then
   creating a dynamic event that goes into that diretory screws up the accounting.
   On close, the newly created event dentry will get a "dput" without ever having
   a "dget" done for it. The fix is to allocate an array on dir open to save what
   dentries were actually "dget" on, and what ones to "dput" on close.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZQ9wihQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6quz4AP4vSFohvmAcTzC+sKP7gMLUvEmqL76+
 1pixXrQOIP5BrQEApUW3VnjqYgjZJR2ne0N4MvvmYElm/ylBhDd4JRrD3g8=
 =X9wd
 -----END PGP SIGNATURE-----

Merge tag 'trace-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull tracing fixes from Steven Rostedt:

 - Fix the "bytes" output of the per_cpu stat file

   The tracefs/per_cpu/cpu*/stats "bytes" was giving bogus values as the
   accounting was not accurate. It is suppose to show how many used
   bytes are still in the ring buffer, but even when the ring buffer was
   empty it would still show there were bytes used.

 - Fix a bug in eventfs where reading a dynamic event directory (open)
   and then creating a dynamic event that goes into that diretory screws
   up the accounting.

   On close, the newly created event dentry will get a "dput" without
   ever having a "dget" done for it. The fix is to allocate an array on
   dir open to save what dentries were actually "dget" on, and what ones
   to "dput" on close.

* tag 'trace-v6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  eventfs: Remember what dentries were created on dir open
  ring-buffer: Fix bytes info in per_cpu buffer stats
2023-09-24 13:55:34 -07:00
Harshit Mogalapalli
43ee22422d power: supply: mm8013: Fix error code in mm8013_probe()
The value of ret is zero when passed to dev_error_probe(), we are passing
zero to dev_err_probe() is a success which is incorrect.

Fix this by getting the error code using PTR_ERR().

Fixes: c75f4bf680 ("power: supply: Introduce MM8013 fuel gauge driver")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202309190838.eu8WS6sz-lkp@intel.com/
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20230923114807.2829188-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2023-09-24 22:51:55 +02:00
Linus Torvalds
2ad78f8cee cxl fixes for v6.6-rc3
- Fix multiple scenarios where platform firmware defined regions fail to
   be assembled by the CXL core.
 
 - Fix a spurious driver-load failure on platforms that enable OS native
   AER, but not OS native CXL error handling.
 
 - Fix a regression detecting "poison" commands when "security" commands
   are also defined.
 
 - Fix a cxl_test regression with the move to centralize CXL port
   register enumeration in the CXL core.
 
 - Miscellaneous small fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZQ9ZeAAKCRDfioYZHlFs
 Z2b6AQDCNGMZdvJXwXW8LY/GHzJvuIWzvzSf0/Zy050Q1s4qrQEAqmmKCXtzjtMV
 PQLm9o3a96Wb/zSzRZJwMVCTyXClVwg=
 =sSix
 -----END PGP SIGNATURE-----

Merge tag 'cxl-fixes-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl

Pull cxl fixes from Dan Williams:
 "A collection of regression fixes, bug fixes, and some small cleanups
  to the Compute Express Link code.

  The regressions arrived in the v6.5 dev cycle and missed the v6.6
  merge window due to my personal absences this cycle. The most
  important fixes are for scenarios where the CXL subsystem fails to
  parse valid region configurations established by platform firmware.
  This is important because agreement between OS and BIOS on the CXL
  configuration is fundamental to implementing "OS native" error
  handling, i.e. address translation and component failure
  identification.

  Other important fixes are a driver load error when the BIOS lets the
  Linux PCI core handle AER events, but not CXL memory errors.

  The other fixex might have end user impact, but for now are only known
  to trigger in our test/emulation environment.

  Summary:

   - Fix multiple scenarios where platform firmware defined regions fail
     to be assembled by the CXL core.

   - Fix a spurious driver-load failure on platforms that enable OS
     native AER, but not OS native CXL error handling.

   - Fix a regression detecting "poison" commands when "security"
     commands are also defined.

   - Fix a cxl_test regression with the move to centralize CXL port
     register enumeration in the CXL core.

   - Miscellaneous small fixes and cleanups"

* tag 'cxl-fixes-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl/acpi: Annotate struct cxl_cxims_data with __counted_by
  cxl/port: Fix cxl_test register enumeration regression
  cxl/region: Refactor granularity select in cxl_port_setup_targets()
  cxl/region: Match auto-discovered region decoders by HPA range
  cxl/mbox: Fix CEL logic for poison and security commands
  cxl/pci: Replace host_bridge->native_aer with pcie_aer_is_native()
  PCI/AER: Export pcie_aer_is_native()
  cxl/pci: Fix appropriate checking for _OSC while handling CXL RAS registers
2023-09-24 13:50:28 -07:00
Kees Cook
3a133a4e44 i2c: Annotate struct i2c_atr with __counted_by
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for struct i2c_atr.

[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-09-24 22:50:25 +02:00
Kees Cook
86f8a1ef96 i2c: mux: demux-pinctrl: Annotate struct i2c_demux_pinctrl_priv with __counted_by
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for struct i2c_demux_pinctrl_priv.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.

[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
[wsa: improved blank lines]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2023-09-24 22:49:13 +02:00
Inochi Amaoto
b3eaec0789 riscv: dts: allwinner: d1: Add PMU event node
D1 has several pmu events supported by opensbi.
These events can be used by perf for profiling.

Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Link: https://dl.linux-sunxi.org/D1/Xuantie_C906_R1S0_User_Manual.pdf
Link: https://github.com/T-head-Semi/openc906/blob/main/C906_RTL_FACTORY/gen_rtl/pmu/rtl/aq_hpcp_top.v#L657
Reviewed-by: Guo Ren <guoren@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/IA1PR20MB49534918FCA69399CE2E0C53BBE0A@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-09-24 22:09:02 +02:00
Martin Botka
d3a3d6a38e arm64: dts: allwinner: h616: Add BigTreeTech Pi support
The BigTreeTech Pi is an H616 based board based on CB1.
Just in Rpi format board.

It features the same internals as BTT CB1 but adds:
    - Fan port
    - IR receiver
    - ADXL345 Accelerometer connector via SPI
    - 24V DC power supply via terminal plugs
    - USB to CAN module connector (External Module)

List of currently working things is same as BTT CB1 but also:
    - IR receiver
    - ADXL345 connector

Signed-off-by: Martin Botka <martin@biqu3d.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230912-b4-cb1-v6-4-bb11238f3a9c@somainline.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-09-24 21:58:22 +02:00
Martin Botka
2e33101f1d arm64: dts: allwinner: h616: Add BigTreeTech CB1 SoM & boards support
CB1 is Compute Module style board that plugs into Rpi board style adapter or
Manta 3D printer boards (M4P/M8P).

The SoM features:
  - H616 SoC
  - 1GiB of RAM
  - AXP313A PMIC
  - RTL8189FTV WiFi

Boards feature:
  - 4x USB via USB2 hub (usb1 on SoM).
  - SDcard slot for loading images.
  - Ethernet port wired to the internal PHY. (100M)
  - 2x HDMI 2.0. (Only 1 usable on CB1)
  - Power and Status LEDs. (Only Status LED usable on CB1)
  - 40 pin GPIO header

Currently working:
  - Booting
  - USB
  - UART
  - MMC
  - Status LED
  - WiFi (RTL8189FS via out of tree driver)

I didnt want to duplicate things so the manta DTS can also be used on BTT pi4b adapter.
CB1 SoM has its own DTSI file in case other boards shows up that accept this SoM.

Signed-off-by: Martin Botka <martin.botka@somainline.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230912-b4-cb1-v6-3-bb11238f3a9c@somainline.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-09-24 21:58:21 +02:00
Martin Botka
2845d77ab3 dt-bindings: arm: sunxi: Add BigTreeTech boards
Add name & compatible for BigTreeTech Manta boards and
BigTreeTech Pi

Signed-off-by: Martin Botka <martin.botka@somainline.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230912-b4-cb1-v6-2-bb11238f3a9c@somainline.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-09-24 21:58:21 +02:00
Martin Botka
1f5219781c dt-bindings: vendor-prefixes: Add BigTreeTech
BigTreeTech is a company based in Shenzhen that makes
3D printers and accessories.

Add prefix for it.

Signed-off-by: Martin Botka <martin.botka@somainline.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230912-b4-cb1-v6-1-bb11238f3a9c@somainline.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-09-24 21:58:21 +02:00
Martin Botka
9519927973 arm64: dts: allwinner: h616: Add SID controller node
Add node for the H616 SID controller

Signed-off-by: Martin Botka <martin.botka@somainline.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230912-sid-h616-v3-2-ee18e1c5bbb5@somainline.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-09-24 21:57:00 +02:00
Martin Botka
8081fb2465 dt-bindings: nvmem: SID: Add binding for H616 SID controller
Add binding for the SID controller found in H616 SoC

Signed-off-by: Martin Botka <martin.botka@somainline.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230912-sid-h616-v3-1-ee18e1c5bbb5@somainline.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-09-24 21:57:00 +02:00
Conor Dooley
267860b10c riscv: dts: allwinner: remove address-cells from intc node
A recent submission [1] from Rob has added additionalProperties: false
to the interrupt-controller child node of RISC-V cpus, highlighting that
the D1 DT has been incorrectly using #address-cells since its
introduction. It has no child nodes, so #address-cells is not needed.
Remove it.

Fixes: 077e5f4f55 ("riscv: dts: allwinner: Add the D1/D1s SoC devicetree")
Link: https://patchwork.kernel.org/project/linux-riscv/patch/20230915201946.4184468-1-robh@kernel.org/ [1]
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230916-saddling-dastardly-8cf6d1263c24@spud
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-09-24 21:53:55 +02:00
Krzysztof Kozlowski
062b9b661f riscv: dts: use capital "OR" for multiple licenses in SPDX
Documentation/process/license-rules.rst and checkpatch expect the SPDX
identifier syntax for multiple licenses to use capital "OR".  Correct it
to keep consistent format and avoid copy-paste issues.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230823085238.113642-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-09-24 21:44:44 +02:00
Krzysztof Kozlowski
12ca3ca8cf arm64: dts: marvell: minor whitespace cleanup around '='
The DTS code coding style expects exactly one space before and after '='
sign.

Link: https://lore.kernel.org/r/20230702185301.44505-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-09-24 20:56:14 +02:00
Krzysztof Kozlowski
aee69e4538 arm64: dts: mediatek: minor whitespace cleanup around '='
The DTS code coding style expects exactly one space before and after '='
sign.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230702185128.44052-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-09-24 20:56:13 +02:00
Krzysztof Kozlowski
73f20a3738 ARM: dts: nuvoton: add missing space before {
Add missing whitespace between node name/label and opening {.

Link: https://lore.kernel.org/r/20230705150045.293879-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-09-24 20:56:01 +02:00
Krzysztof Kozlowski
96ba96612d ARM: dts: mediatek: minor whitespace cleanup around '='
The DTS code coding style expects exactly one space before and after '='
sign.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230702185128.44052-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-09-24 20:55:59 +02:00
Krzysztof Kozlowski
a9c740c57f arm64: dts: mediatek: add missing space before {
Add missing whitespace between node name/label and opening {.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230705150006.293690-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-09-24 20:45:35 +02:00
Krzysztof Kozlowski
f673ab0ceb ARM: dts: mediatek: add missing space before {
Add missing whitespace between node name/label and opening {.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230705150006.293690-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-09-24 20:45:23 +02:00
Krzysztof Kozlowski
05521ef098 arm64: dts: apm: add missing space before {
Add missing whitespace between node name/label and opening {.

Link: https://lore.kernel.org/r/20230705145934.293487-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-09-24 20:44:43 +02:00
Krzysztof Kozlowski
33d6227fcd ARM: dts: omap3-devkit8000: correct ethernet reg addresses (split)
The davicom,dm9000 Ethernet Controller accepts two reg addresses.

Link: https://lore.kernel.org/r/20230713152913.82846-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-09-24 20:43:46 +02:00
Krzysztof Kozlowski
0b137caaaa arm64: dts: bitmain: lowercase unit addresses
Unit addresses are expected to be lower case.  Pointed also by W=1
builds:

  Warning (simple_bus_reg): /soc/serial@5801A000: simple-bus unit address format error, expected "5801a000"

Link: https://lore.kernel.org/r/20230712074611.35952-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-09-24 20:43:14 +02:00
David Lechner
5e99f692d4 staging: iio: resolver: ad2s1210: fix not restoring sample gpio in channel read
In theory, this code path should not be reachable because of the
previous switch statement. But just in case we should make sure we
are restoring the SAMPLE gpio to its original state before returning
in addition to releasing the mutex lock.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20230921144400.62380-5-dlechner@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-09-24 18:54:59 +01:00
David Lechner
c78a96ab0f staging: iio: resolver: ad2s1210: fix ad2s1210_show_fault
When reading the fault attribute, an empty string was printed if the
fault register value was non-zero.

This is fixed by checking that the return value is less than zero
instead of not zero.

Also always print two hex digits while we are touching this line.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20230921144400.62380-4-dlechner@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-09-24 18:54:55 +01:00
Paul E. McKenney
3e9b009c16 torture: Convert parse-console.sh to mktemp
This commit does the long-overdue conversion of the parse-console.sh
file to use mktemp to create its temporary directory.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
2023-09-24 17:24:02 +02:00
Zqiang
771a92b85a rcutorture: Traverse possible cpu to set maxcpu in rcu_nocb_toggle()
Currently, the maxcpu is set by traversing online CPUs, however, if the
rcutorture.onoff_holdoff is set zero and onoff_interval is set non-zero,
and the some CPUs with larger cpuid has been offline before setting
maxcpu, for these CPUs, even if they are online again, also cannot
be offload or deoffload.  This can result in rcutorture attempting to
(de-)offload CPUs that have never been online, but the (de-)offload code
handles this.

This commit therefore use for_each_possible_cpu() instead of
for_each_online_cpu() in rcu_nocb_toggle().

Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
2023-09-24 17:24:02 +02:00
Joel Fernandes (Google)
66bcb1321b rcutorture: Replace schedule_timeout*() 1-jiffy waits with HZ/20
In the past, spinning on schedule_timeout* with a wait of 1 jiffy has
hung the kernel. See for example d52d3a2bf4 ("torture: Fix hang during
kthread shutdown phase").

This issue recently recurred in torture's stutter code.  The result is
that the function instantly returns and never goes to sleep, preempting
whatever might otherwise make useful forward progress.

To prevent future issues, apply the commit-d52d3a2bf408 fix throughout
rcutorture, moving from a 1-jiffy wait to a 50-millisecond wait.

Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
2023-09-24 17:24:02 +02:00
Paul E. McKenney
30639bfdac torture: Add kvm.sh --debug-info argument
This commit adds a --debug-info argument to kvm.sh in order to ease
interpretation of addresses printed on the console and the like.
This argument also disables KASLR.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
2023-09-24 17:24:02 +02:00