The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-24-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-23-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-22-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-21-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-20-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-19-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-18-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-17-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-16-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-15-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-14-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-13-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-12-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-10-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-9-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-8-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230918133700.1254499-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add ice_pf_src_tmr_owned() macro to check the function capability bit
indicating if the current function owns the PTP hardware clock. This is
slightly shorter than the more verbose access via
hw.func_caps.ts_func_info.src_tmr_owned. Use this where possible rather
than open coding its equivalent.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Since commit 43c4958a3d ("ice: Merge pin initialization of E810 and E810T
adapters"), the ice_ptp_setup_pins_e810() function has been used for both
E810 and E810-T devices. The new implementation only distinguishes between
whether the device has SMA control or not. It was assumed this is always
true for E810-T devices. In addition, it does not set the n_per_out value
appropriately when SMA control is enabled.
In some cases, the E810-T device may not have access to SMA control. In
that case, the E810-T device actually has access to fewer pins than a
standard E810 device.
Fix the implementation to correctly assign the appropriate pin counts for
E810-T devices both with and without SMA control. The mentioned commit
already includes the appropriate macro values for these pin counts but they
were unused.
Instead of assigning the default E810 values and then overwriting them,
handle the cases separately in order of E810-T with SMA, E810-T without
SMA, and then standard E810. This flow makes following the logic easier.
Fixes: 43c4958a3d ("ice: Merge pin initialization of E810 and E810T adapters")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ICE_F_PTP_EXTTS feature flag is ostensibly intended to support checking
whether the device supports external timestamp pins. It is only checked in
E810-specific code flows, and is enabled for all E810-based devices. E822
and E823 flows unconditionally enable external timestamp support.
This makes the feature flag meaningless, as it is always enabled. Just
unconditionally enable support for external timestamp pins and remove this
unnecessary flag.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The callers of ice_fill_phy_msg_e822 check for whether the quad number is
within the expected range. Move this check inside the ice_fill_phy_msg_e822
function instead of duplicating it twice.
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_fill_phy_msg_e822 function uses several macros to specify the
correct address when sending a sideband message to the PHY block in
hardware.
The names of these macros are fairly generic and confusing. Future
development is going to extend the driver to support new hardware families
which have different relationships between PHY and QUAD. Rename the macros
for clarity and to indicate that they are E822 specific. This also matches
closer to the hardware specification in the data sheet.
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
E822 PHY TS registers should not be written and the only way to clean up
them is to reset QUAD memory.
To ensure that the status bit for the timestamp index is cleared, ensure
that ice_clear_phy_tstamp implementations first read the timestamp out.
Implementations which can write the register continue to do so.
Add a note to indicate this function should only be called on timestamps
which have their valid bit set. Update the dynamic debug messages to
reflect the actual action taken.
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice driver has PTP support which works across a couple of different
device families. The device families each have different PHY hardware which
have unique requirements for programming.
Today, there is E810-based hardware, and E822-based hardware. To handle
this, the driver checks the ice_is_e810() function to separate between the
two existing families of hardware.
Future development is going to add new hardware designs which have further
unique requirements. To make this easier, introduce a phy_model field to
the HW structure. This field represents what PHY model the current device
has, and is used to allow distinguishing which logic a particular device
needs.
This will make supporting future upcoming hardware easier, by providing an
obvious place to initialize the PHY model, and by already using switch/case
statements instead of the previous if statements.
Astute reviewers may notice that there are a handful of remaining checks
for ice_is_e810() left in ice_ptp.c These conflict with some other
cleanup patches in development, and will be fixed in the near future.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The E822 hardware has cross timestamping support using a device feature
termed "Hammock Harbor" by the data sheet. This device feature is similar
to PCIe PTM, and captures the Always Running Timer (ART) simultaneously
with the PTP hardware clock time.
This functionality also exists on E823 devices, but is not currently
enabled.
Rename the cross-timestamp functions to use the _e82x postfix, indicating
that the support works across the E82x family of devices and not just the
E822 hardware.
The flow for capturing a cross-timestamp requires an additional step on
E823 devices. The GLTSYN_CMD register must be programmed with the READ_TIME
command. Otherwise, the cross timestamp will always report a value of zero
for the PTP hardware clock time.
To fix this, call ice_ptp_src_cmd() prior to initiating the cross timestamp
logic. Once the cross timestamp has completed, call ice_ptp_src_cmd() with
ICE_PTP_OP to ensure that the timer command registers are cleared.
Co-developed-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com>
Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The hardware for performing a cross-timestamp on E822 uses a hardware
semaphore which we must acquire before initiating the cross-timestamp
operation.
The current implementation only attempts to acquire the semaphore once, and
assumes that it will succeed. If the semaphore is busy for any reason, the
cross-timestamp operation fails with -EFAULT.
Instead of immediately failing, try the acquire the lock a few times with a
small sleep between attempts. This ensures that most requests will go
through without issue.
Additionally, return -EBUSY instead of -EFAULT if the operation can't
continue due to the semaphore being busy.
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice driver has an enumeration for the various commands that can be
programmed to the MAC and PHY for setting up hardware clock operations.
Prefix these with ICE_PTP so that they are clearly namespaced to the ice
driver.
Signed-off-by: Sergey Temerkhanov <sergey.temerkhanov@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Building UML with KASAN fails since commit 69d4c0d321 ("entry, kasan,
x86: Disallow overriding mem*() functions") with the following errors:
$ tools/testing/kunit/kunit.py run --kconfig_add CONFIG_KASAN=y
...
ld: mm/kasan/shadow.o: in function `memset':
shadow.c:(.text+0x40): multiple definition of `memset';
arch/x86/lib/memset_64.o:(.noinstr.text+0x0): first defined here
ld: mm/kasan/shadow.o: in function `memmove':
shadow.c:(.text+0x90): multiple definition of `memmove';
arch/x86/lib/memmove_64.o:(.noinstr.text+0x0): first defined here
ld: mm/kasan/shadow.o: in function `memcpy':
shadow.c:(.text+0x110): multiple definition of `memcpy';
arch/x86/lib/memcpy_64.o:(.noinstr.text+0x0): first defined here
UML does not use GENERIC_ENTRY and is still supposed to be allowed to
override the mem*() functions, so use weak aliases in that case.
Fixes: 69d4c0d321 ("entry, kasan, x86: Disallow overriding mem*() functions")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20230918-uml-kasan-v3-1-7ad6db477df6@axis.com
A double-asterisk opening mark to the comment (i.e. '/**') indicates a
comment block is in the kerneldoc format. There's automation in place to
validate that kerneldoc blocks actually adhere to the formatting rules.
The function comment for arm64_check_features() isn't kerneldoc; use a
'regular' comment to silence automation warnings.
Link: https://lore.kernel.org/all/202309112251.e25LqfcK-lkp@intel.com/
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20230913165645.2319017-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Fix to unmount tracefs if the self-test mounted it to allow testing.
If tracefs was already mounted, this does nothing.
Suggested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/all/29fce076-746c-4650-8358-b4e0fa215cf7@sirena.org.uk/
Fixes: a06023a8f7 ("selftests/user_events: Fix failures when user_events is not installed")
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There was a recent update in the BSpec adding an extra step to the PLL
enable sequence, which is for programming the msgbus timer. Since we
also touch PHY registers during hw readout, let's do the programming
when starting a transaction rather than only when doing the PLL enable
sequence.
This might be the missing step that was causing the timeouts
that we have recently seen during C20 SRAM register programming
sequences. With this in place, we shouldn't need the logic to bump the
timer thresholds, since now we have a documented value that should be
set peform programming the registers. As such, let's also remove
intel_cx0_bus_check_and_bump_timer(), but keep the part that checks if
hardware really detected a timeout, which might be useful debugging
information.
v2:
- Use debug level instead of warning for the message notifying that
the hardware did not detect the timeout. (Mika)
- Got a new BSpec update clarifying that we need to program the msgbus
timer of both PHY lanes. Update the changes to reflect that.
(Gustavo)
BSpec: 64568
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230912155923.39494-1-gustavo.sousa@intel.com
If we skip one parametrized test case then test status remains
SKIP for all subsequent test params leading to wrong reports:
$ ./tools/testing/kunit/kunit.py run \
--kunitconfig ./lib/kunit/.kunitconfig *.example_params*
--raw_output \
[ ] Starting KUnit Kernel (1/1)...
KTAP version 1
1..1
# example: initializing suite
KTAP version 1
# Subtest: example
# module: kunit_example_test
1..1
KTAP version 1
# Subtest: example_params_test
# example_params_test: initializing
# example_params_test: cleaning up
ok 1 example value 3 # SKIP unsupported param value 3
# example_params_test: initializing
# example_params_test: cleaning up
ok 2 example value 2 # SKIP unsupported param value 3
# example_params_test: initializing
# example_params_test: cleaning up
ok 3 example value 1 # SKIP unsupported param value 3
# example_params_test: initializing
# example_params_test: cleaning up
ok 4 example value 0 # SKIP unsupported param value 0
# example_params_test: pass:0 fail:0 skip:4 total:4
ok 1 example_params_test # SKIP unsupported param value 0
# example: exiting suite
ok 1 example # SKIP
Reset test status and status comment after each param iteration
to avoid using stale results.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a test of the speed and memory use of string_stream.
string_stream_performance_test() doesn't actually "test" anything (it
cannot fail unless the system has run out of allocatable memory) but it
measures the speed and memory consumption of the string_stream and reports
the result.
This allows changes in the string_stream implementation to be compared.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Replace the fixed-size log buffer with a string_stream so that the
log can grow as lines are added.
The existing kunit log tests have been updated for using a
string_stream as the log. No new test have been added because there
are already tests for the underlying string_stream.
As the log tests now depend on string_stream functions they cannot
build when kunit-test is a module. They have been surrounded by
a #if to replace them with skipping version when the test is
build as a module. Though this isn't pretty, it avoids moving
code to another file while that code is also being changed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
string_stream_managed_free_test() allocates a resource-managed
string_stream and tests that kunit_free_string_stream() calls
string_stream_destroy().
string_stream_resource_free_test() allocates a resource-managed
string_stream and tests that string_stream_destroy() is called
when the test resources are cleaned up.
The old string_stream_init_test() has been split into two tests,
one for kunit_alloc_string_stream() and the other for
alloc_string_stream().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Re-work string_stream so that it is not tied to a struct kunit. This is
to allow using it for the log of struct kunit_suite.
Instead of resource-managing individual allocations the whole string_stream
can be resource-managed, if required.
alloc_string_stream() now allocates a string stream that is
not resource-managed.
string_stream_destroy() now works on an unmanaged string_stream
allocated by alloc_string_stream() and frees the entire
string_stream (previously it only freed the fragments).
string_stream_clear() has been made public for callers that
want to free the fragments without destroying the string_stream.
For resource-managed allocations use kunit_alloc_string_stream()
and kunit_free_string_stream().
In addition to this, string_stream_get_string() now returns an
unmanaged buffer that the caller must kfree().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add function kunit_alloc_string_stream() to do a resource-managed
allocation of a string stream, and corresponding
kunit_free_string_stream() to free the resource-managed stream.
This is preparing for decoupling the string_stream
implementation from struct kunit, to reduce the amount of code
churn when that happens. Currently:
- kunit_alloc_string_stream() only calls alloc_string_stream().
- kunit_free_string_stream() takes a struct kunit* which
isn't used yet.
Callers of the old alloc_string_stream() and
string_stream_destroy() are all requesting a managed allocation
so have been changed to use the new functions.
alloc_string_stream() has been temporarily made static because
its current behavior has been replaced with
kunit_alloc_string_stream().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There is no need to use a test-managed alloc in is_literal().
The function frees the temporary buffer before returning.
This removes the only use of the test and gfp members of
struct string_stream outside of the string_stream implementation.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add test cases for testing the string_stream feature that appends a
newline to strings that do not already end with a newline.
string_stream_no_auto_newline_test() tests with this feature disabled.
Newlines should not be added or dropped.
string_stream_auto_newline_test() tests with this feature enabled.
Newlines should be added to lines that do not end with a newline.
string_stream_append_auto_newline_test() tests appending the
content of one stream to another stream when the target stream
has newline appending enabled.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add an optional feature to string_stream that will append a newline to
any added string that does not already end with a newline. The purpose
of this is so that string_stream can be used to collect log lines.
This is enabled/disabled by calling string_stream_set_append_newlines().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Replace the minimal tests with more-thorough testing.
string_stream_init_test() tests that struct string_stream is
initialized correctly.
string_stream_line_add_test() adds a series of numbered lines and
checks that the resulting string contains all the lines.
string_stream_variable_length_line_test() adds a large number of
lines of varying length to create many fragments, then tests that all
lines are present.
string_stream_append_test() tests various cases of using
string_stream_append() to append the content of one stream to another.
Adds string_stream_append_empty_string_test() to test that adding an
empty string to a string_stream doesn't create a new empty fragment.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If the result of the formatted string is an empty string just return
instead of creating an empty fragment.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
da7213 is still using M/S instead of P/C for SND_SOC_DAIFMT_CBx_CFx.
[PATCH 1/2] will update it.
[PATCH 2/2] will enable DAI format automatic select.
Add a KUnit test for cirrus_scodec_get_speaker_id(). It is impractical
to have enough hardware with every possible permutation of speaker id.
So use a test harness to test all theoretically supported options.
The test harness consists of:
- a mock GPIO controller.
- a mock struct device to represent the scodec driver
- software nodes to provide the fwnode info that would normally come
from ACPI.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230918095129.440-3-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>