Create a new common module to host functions which could be shared
among SSP machine drivers. Add functions to detect headphone codec and
speaker amplifier via ACPI system at runtime in order to remove codec
type quirks in machine drivers.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove SOF_RT5682_MCLK_24MHZ flag from JSL and CML/WHL board configs
since the information could be retrieved from SOF API. The macro
itself is removed as well.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915124852.1696857-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEN9lkrMBJgcdVAPub1V2XiooUIOQFAmUCKboACgkQ1V2XiooU
IOQ1CxAAqKwyeROJ7+qLvIBbwRFIQr70pPCjfY/GskP9aqljhth+e5TsKurWA12X
wwbVhQ9xblvxarekR4B8lwGhvenYHk3l6R/3wuTMYPHFTXkE+mluGgljffaMwV+D
YywK5hOkLenBZmxdjUfdJ87DJwAadcbLOABmEiSQ3hDxj3/xTBf7gToqlSwHtjCC
JDC7vhxjosQHQSLhjqetfrUauz0OZAqldZ2is/FELYg56oCGKddGAZxnC4fQBnXx
DzvRroP8f8bkqGjKwkt945bKiQ4Cz1frQE+YP1+pRk0rOkv70hhzH0JXIELQ5q9L
RYLFfgkemp2HfBJ+y2PK8lBDailre4MdGdsAI5eWjBXgrl3jRBybioafhhUbJVIq
Q3zIzXVgLQqXwSONBF2sfVssVZzhfjAzZQzzgw3wayhWj1WgwqsCb0EChvA4FJZ7
HW4xyROeOV7GHoUAWCPcoeBiNJYKmGNWjkWwlT4q5LtYMyWWP9oYx2kOn9/JQ9QI
Tth8QobntRr8Gw/f0awGULM2pcecCLyYhIoJtWctegFSN2ejrKiV9XItbxZ3G1in
3pYSVgpyve9ZAvHmTSyvh+mjZ71X2ZebLyMADrWbsHrCXgIUSUkoksQd97XsffeZ
noRVlLj0MlfRlUoorDQG3A+QxdQb+ZaHkBKTOEzouKOYEj6vylY=
=TgRd
-----END PGP SIGNATURE-----
Merge tag 'nf-23-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
netfilter pull request 23-09-13
====================
The following patchset contains Netfilter fixes for net:
1) Do not permit to remove rules from chain binding, otherwise
double rule release is possible, triggering UaF. This rule
deletion support does not make sense and userspace does not use
this. Problem exists since the introduction of chain binding support.
2) rbtree GC worker only collects the elements that have expired.
This operation is not destructive, therefore, turn write into
read spinlock to avoid datapath contention due to GC worker run.
This was not fixed in the recent GC fix batch in the 6.5 cycle.
3) pipapo set backend performs sync GC, therefore, catchall elements
must use sync GC queue variant. This bug was introduced in the
6.5 cycle with the recent GC fixes.
4) Stop GC run if memory allocation fails in pipapo set backend,
otherwise access to NULL pointer to GC transaction object might
occur. This bug was introduced in the 6.5 cycle with the recent
GC fixes.
5) rhash GC run uses an iterator that might hit EAGAIN to rewind,
triggering double-collection of the same element. This bug was
introduced in the 6.5 cycle with the recent GC fixes.
6) Do not permit to remove elements in anonymous sets, this type of
sets are populated once and then bound to rules. This fix is
similar to the chain binding patch coming first in this batch.
API permits since the very beginning but it has no use case from
userspace.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
====================
net: Add Half Duplex support for ICSSG Driver
This series adds support for half duplex operation for ICSSG driver.
In order to support half-duplex operation at 10M and 100M link speeds, the
PHY collision detection signal (COL) should be routed to ICSSG GPIO pin
(PRGx_PRU0/1_GPI10) so that firmware can detect collision signal and apply
the CSMA/CD algorithm applicable for half duplex operation. A DT property,
"ti,half-duplex-capable" is introduced for this purpose in the first patch
of the series. If board has PHY COL pin conencted to PRGx_PRU1_GPIO10,
this DT property can be added to eth node of ICSSG, MII port to support
half duplex operation at that port.
Second patch of the series configures driver to support half-duplex
operation if the DT property "ti,half-duplex-capable" is enabled.
This series addresses comments on [v2]. This series is based on the latest
net-next/main. This series has no dependency.
Changes from v1 to v2:
*) Changed the description of "ti,half-duplex-capable" property as asked
by Rob and Andrew to avoid confusion between capable and enable.
Changes from v1 to v2:
*) Dropped the RFC tag.
*) Added RB tags of Andrew and Roger.
[v1] https://lore.kernel.org/all/20230830113134.1226970-1-danishanwar@ti.com/
[v2] https://lore.kernel.org/all/20230911060200.2164771-1-danishanwar@ti.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support for half duplex operation at 10M and 100M link
speeds for AM654x/AM64x devices.
- Driver configures rand_seed, a random number, in DMEM HD_RAND_SEED_OFFSET
field, which will be used by firmware for Back off time calculation.
- Driver informs FW about half duplex link operation in DMEM
PORT_LINK_SPEED_OFFSET field by setting bit 7 for 10/100M HD.
Hence, the half duplex operation depends on board design the
"ti,half-duplex-capable" property has to be enabled for ICSS-G ports if HW
is capable to perform half duplex.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to support half-duplex operation at 10M and 100M link speeds, the
PHY collision detection signal (COL) should be routed to ICSSG
GPIO pin (PRGx_PRU0/1_GPI10) so that firmware can detect collision signal
and apply the CSMA/CD algorithm applicable for half duplex operation. A DT
property, "ti,half-duplex-capable" is introduced for this purpose. If
board has PHY COL pin conencted to PRGx_PRU1_GPIO10, this DT property can
be added to eth node of ICSSG, MII port to support half duplex operation at
that port.
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lengths of SG pointers are kept in the following order in
the SG entries in hardware.
63 48|47 32|31 16|15 0
-----------------------------------------
| Len 0 | Len 1 | Len 2 | Len 3 |
-----------------------------------------
| Ptr 0 |
-----------------------------------------
| Ptr 1 |
-----------------------------------------
| Ptr 2 |
-----------------------------------------
| Ptr 3 |
-----------------------------------------
Dma pointers have to be unmapped based on their
respective lengths given in this format.
Fixes: 37d79d0596 ("octeon_ep: add Tx/Rx processing and interrupt support")
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex reported that running ssh over IPv6 does not work with
Thunderbolt/USB4 networking driver. The reason for that is that driver
should call skb_is_gso() before calling skb_is_gso_v6(), and it should
not return false after calculates the checksum successfully. This probably
was a copy paste error from the original driver where it was done properly.
Reported-by: Alex Balcanquall <alex@alexbal.com>
Fixes: e69b6c02b4 ("net: Add support for networking over Thunderbolt cable")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rather than incrementing the ID for the dai_links in many places
throughout the code, just increment it each time we initialise a new DAI
link.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915075611.1619548-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now only the SoundWire part of the code uses the global cpus array,
remove it and have create_sdw_dailink allocate its own link components.
This removes a lot of state being passed around in the driver, which
simplifies things a fair bit.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915075611.1619548-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The code contains a fair amount of state tracking and one part of that
is keeping track of which entry in the large global cpus
snd_soc_dai_link_component array is currently in use. Add a helper
function to allocate a simple DAI link, this simplifies the
code slightly and moves us in the direction of eliminating the need for
the large global cpus array. This does slightly increase the number of
allocations done, but this is probe time and the code already does a
large number of allocations so this increase is small over all.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915075611.1619548-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Whilst it should not cause any issues as only a single instance of the
machine will be instantiated, it is still slightly better practice to
keep working data in the private data structure, rather than a global
variable. Move sdw_pin_index into the mc_private structure.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230915075611.1619548-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We don't need to maintain per-queue leaf_cfs_rq_list on !SMP, since
it's used for cfs_rq load tracking & balancing on SMP.
But sched debug interface uses it to print per-cfs_rq stats.
This patch fixes the !SMP version of cfs_rq_is_decayed(), so the
per-queue leaf_cfs_rq_list is also maintained correctly on !SMP,
to fix the warning in assert_list_leaf_cfs_rq().
Fixes: 0a00a35464 ("sched/fair: Delete useless condition in tg_unthrottle_up()")
Reported-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Closes: https://lore.kernel.org/all/ZN87UsqkWcFLDxea@swlinux02/
Link: https://lore.kernel.org/r/20230913132031.2242151-1-chengming.zhou@linux.dev
The compile warning with -Wformat-truncation at
sdw_amd_scan_controller() is false-positive; the max loop size is
AMD_SDW_MAX_MANAGERS (= 2), hence it fits with the given size.
For suppressing the warning, replace snprintf() with scnprintf().
As stated in the above, truncation doesn't matter.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230915082207.26200-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds a control that there are four options to control the digital volume output.
The user could select "immediate" to make volume updates immediately.
In default, the driver selects the volume update with "zero detection + soft inc/dec change".
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20230915020530.83452-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The devm_clk_get() can return -EPROBE_DEFER error,
modify the error code to be -EINVAL is not correct, which
cause the -EPROBE_DEFER error is not correctly handled.
This patch is to fix the return error code.
Fixes: b86ef53677 ("ASoC: fsl: Add Audio Mixer machine driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/1694757731-18308-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because of the potential failure of the devm_kstrdup(), the
dl[i].codecs->name could be NULL.
Therefore, we need to check it and return -ENOMEM in order to transfer
the error.
Fixes: 97030a4337 ("ASoC: Intel: avs: Add HDAudio machine board")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230915021344.3078-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to validate SPI peripherals, SPI controller-specific child node
properties need to be in a separate schema, spi-peripheral-props.yaml,
which SPI peripheral schemas reference. Move the arm,pl022 child
properties to their own schema file and add a $ref in
spi-peripheral-props.yaml.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230914190033.1852600-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a certain sequence needs to be followed when configuring the HDA
DMA in host and DSP.
The firmware provides a way to handle this two stage sequencing by
splitting the library loading into two stage:
1st stage: LOAD_LIBRARY_PREPARE message
the lib_id is 0, used to configure the DMA on DSP side
2nd stage: LOAD_LIBRARY message
both dma_id and lib_id is valid, used for the actual transfer of
the library
In case a firmware without support for this two stage loading is used then
the second stage message will trigger the loading and the first stage will
return with error, which is ignored by the kernel.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://lore.kernel.org/r/20230915114018.1701-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On Intel platforms there is a strict order requirement for the DMA
programming:
DSP side configures the buffer and sets the GEN bit
Host side sets the RUN bit.
In order to follow this flow, a new global message type has been added to
prepare the DSP side of the DMA:
host sends LOAD_LIBRARY_PREPARE with the dma_id
DSP side sets its buffer and sets the GEN bit
Host sets the RUN bit
Host sends LOAD_LIBRARY with dma_id and lib_id
DSP receives the library data.
It is up to the platform code to use the new prepare stage message and how
to handle the reply to it from the firmware, which can indicate that the
message type is not supported/handled.
In this case the kernel should proceed to the LOAD_LIBRARY stage assuming
a single stage library loading:
host sends LOAD_LIBRARY_PREPARE with the dma_id
DSP replies that the message type is not supported/handled
Host acknowledges the return code and sets the RUN bit
Host sends LOAD_LIBRARY with dma_id and lib_id
DSP receives the library data.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://lore.kernel.org/r/20230915114018.1701-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The FIFOS (FIFO Size) field is in bit 0-15 of the register.
Use the defined mask instead of a magic number for the FIFOS value
masking in hda_dsp_stream_hw_params().
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://lore.kernel.org/r/20230915114018.1701-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The status code 2 and 15 can be translated to -EOPNOTSUPP, so convert them
to a meaningful error number.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Link: https://lore.kernel.org/r/20230915114018.1701-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a copier exposes a single format, we can fixup the BE dailink with
that format. This is helpful when some codec have format restrictions and
e.g. don't support a 32-bit format. In that case, the copier output
formats mirror that restriction in the topology file.
An alternate solution was suggested earlier using a dedicated topology
token. When specified, the token would be used to fix-up the dailink. The
main reason why this solution was chosen is that there is a risk of a
disconnect between token definition and copier format. With a single piece
of information as suggested in this patch, there are fewer risks of a bad
configuration.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230915093507.7242-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We will use the sof_ipc4_copier_is_single_format() function to check if a
ipc4 copier has single format available in ipc4-pcm.c in the next patch.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230915093507.7242-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the i915 specific i2c-N symlink from HDMI connectors.
This was added to sort of mirror the DP connectors that alreayd
had their aux ch based i2c adapter sitting beneath them in the
sysfs hierarchy. But now that we have the standard "ddc" symlink
approach provided by the core let's switch to that fully.
I don't think anything beyond igt depends on this.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-12-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Remove the mostly redundant hdmi->ddc_bus. The only thing that needs
it anymore is get_encoder_by_ddc_bus(), but that can be replaced with
a slight detour through attached_connector+intel_gmbus_get_adapter().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-11-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
sched_numa_find_nth_cpu() doesn't handle NUMA_NO_NODE properly, and
may crash kernel if passed with it. On the other hand, the only user
of sched_numa_find_nth_cpu() has to check NUMA_NO_NODE case explicitly.
It would be easier for users if this logic will get moved into
sched_numa_find_nth_cpu().
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Link: https://lore.kernel.org/r/20230819141239.287290-6-yury.norov@gmail.com
When CONFIG_NUMA is enabled, sched_numa_find_nth_cpu() searches for a
CPU in sched_domains_numa_masks. The masks includes only online CPUs,
so effectively offline CPUs are skipped.
When CONFIG_NUMA is disabled, the fallback function should be consistent.
Fixes: cd7f55359c ("sched: add sched_numa_find_nth_cpu()")
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Link: https://lore.kernel.org/r/20230819141239.287290-5-yury.norov@gmail.com
task_numa_placement() searches for a nearest node to migrate by calling
for_each_node_state(). Now that we have numa_nearest_node(), switch to
using it.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Link: https://lore.kernel.org/r/20230819141239.287290-3-yury.norov@gmail.com
The function in fact searches the nearest node for a given one,
based on a N_ONLINE state. This is a common pattern to search
for a nearest node.
This patch converts numa_map_to_online_node() to numa_nearest_node()
so that others won't need to opencode the logic.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Link: https://lore.kernel.org/r/20230819141239.287290-2-yury.norov@gmail.com
Populate connector->ddc, and thus create the "ddc" symlink
in sysfs for analog DP SST connectors.
Let's also reorder intel_dp_aux_init() vs. drm_connector_init_with_ddc()
a bit to make sure the i2c aux ch is at least somewhat populated
before we pass it on, though drm_connector_init_with_ddc() does
not actually do anything with it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Populate connector->ddc, and thus create the "ddc" symlink
in sysfs for analog VGA connectors.
As a bonus we can replace a bunch of intel_gmbus_get_adapter()
lookups with just the connector->ddc pointer. Sadly one extra
lookup still remains due to the g4x DVI-I shenanigans. We could
perhaps consider borrowing the ddc proxy idea from SDVO to deal
with that in a perhaps nicer way, but can't really be bothered
right now at least. Also not sure exposing such a dual ddc bus
to userspace would be quite wise.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Rename the various names we've used for the DDC bus
i2c adapter ("i2c", "adapter", etc.) to just "ddc".
This differentiates it from the various other i2c
busses we might have (DSI panel stuff, DVO control bus, etc.).
v2: Don't add a bogus drm_get_edid() call (Jani)
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230831104300.29688-1-ville.syrjala@linux.intel.com
Currently drm_sysfs_connector_add() attempts to register
the "ddc" symlink (based one connector->ddc) before the
driver's .early_register() hook has been called. That is
too early for i915 which only fully registers the aux ch
and associated i2c bus from said hook (to prevent half
initialized stuff getting exposed to userspace). This
causes my attempt at using drm_connector_init_with_ddc()
to fail, and the entire connector disappears from sysfs
on account of sysfs_create_link() failing.
To fix that split the sysfs symlink stuff into separate
functions (drm_sysfs_connector_add_late() and
drm_sysfs_connector_remove_early()) which are called
on the opposite side of the .later_register() and
.early_unregister() hooks.
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de> #irc
Use the standard onion peeling approach and call
drm_debugfs_connector_remove() and
drm_sysfs_connector_remove() in the reverse order in
drm_connector_unregister() than what we called their
add counterpartse in drm_connector_register().
The error unwiding in drm_connector_register() is
already doing this the correct way around.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230829113920.13713-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de> #irc
The filling of card->longname can be gracefully truncated, as it's
only informative. Use scnprintf() and suppress the superfluous
compile warning with -Wformat-truncation.
Link: https://lore.kernel.org/r/20230915091313.5988-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The filling of card->longname can be gracefully truncated, as it's
only informative. Use scnprintf() and suppress the superfluous
compile warning with -Wformat-truncation.
Link: https://lore.kernel.org/r/20230915091313.5988-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The filling of card->longname can be gracefully truncated, as it's
only informative. Use scnprintf() and suppress the superfluous
compile warning with -Wformat-truncation.
Link: https://lore.kernel.org/r/20230915091313.5988-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
add_control_with_pfx() constructs a mixer name element with the fixed
size, and it got compile warnings with -Wformat-truncation.
Although the size overflow is very unlikely, let's have a sanity check
of the string size and returns the error if it really doesn't fit
instead of silent truncation.
Link: https://lore.kernel.org/r/20230915082802.28684-14-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>