Marek reports that his RPi4 spits out a warning at boot time,
right at the point where the GICv2 virtual CPU interface gets
mapped.
Upon investigation, it seems that we never return the allocated
VA and use whatever was on the stack at this point. Yes, this
is good stuff, and Marek was pretty lucky that he ended-up with
a VA that intersected with something that was already mapped.
On my setup, this random value is plausible enough for the mapping
to take place. Who knows what happens...
Fixes: f156a7d13f ("KVM: arm64: Remove size-order align in the nVHE hyp private VA range")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/79b0ad6e-0c2a-f777-d504-e40e8123d81d@samsung.com
Link: https://lore.kernel.org/r/20230828153121.4179627-1-maz@kernel.org
If system has two speakers and one connect to 0x14 pin, use this
function will disable it.
Fixes: e43252db7e ("ALSA: hda/realtek - ALC287 I2S speaker platform support")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/e3f2aac3fe6a47079d728a6443358cc2@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use bitmap_zalloc() and bitmap_free() instead of hand-writing them.
It is less verbose and it improves the type checking and semantic.
While at it, add missing header inclusion (should be bitops.h,
but with the above change it becomes bitmap.h).
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230911131618.4159437-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 5904de0d73 ("PM: hibernate: Do not get block device exclusively
in test_resume mode") fixes a hibernation issue under test_resume mode.
That commit is supposed to open the block device in non-exclusive mode
when in test_resume. However the code does the opposite, which is against
its description.
In summary, the swap device is only opened exclusively by swsusp_check()
with its corresponding *close(), and must be in non test_resume mode.
This is to avoid the race condition that different processes scribble the
device at the same time. All the other cases should use non-exclusive mode.
Fix it by really disabling exclusive mode under test_resume.
Fixes: 5904de0d73 ("PM: hibernate: Do not get block device exclusively in test_resume mode")
Closes: https://lore.kernel.org/lkml/000000000000761f5f0603324129@google.com/
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: Chenzhou Feng <chenzhoux.feng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Several functions reply on snapshot_test to decide whether to
open the resume device exclusively. However there is no strict
connection between the snapshot_test and the open mode. Rename
the 'snapshot_test' input parameter to 'exclusive' to better reflect
the use case.
No functional change is expected.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since commit 1202cdd66531("Remove DECnet support from kernel") has been
merged, all callers pass in the initial_ref value of 1 when they call
dst_alloc(). Therefore, remove initial_ref when the dst_alloc() is
declared and replace initial_ref with 1 in dst_alloc().
Also when all callers call dst_init(), the value of initial_ref is 1.
Therefore, remove the input parameter initial_ref of the dst_init() and
replace initial_ref with the value 1 in dst_init.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20230911125045.346390-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Simplify probe() by replacing id lookup for retrieving match data and
device_get_match_data() by i2c_get_match_data().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230903145926.66855-1-biju.das.jz@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The MCP4725 has a register offset '3' for reading DAC value compared to
'4' for MCP4726. Add dac_reg_offset variable to struct mcp4725_chip_info
to handle this difference.
Drop chip_id from struct mcp4725_chip_info as it is unused.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230903115548.59306-5-biju.das.jz@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The MCP4725 has external voltage reference compared MCP4725 which
has reference embeedded in eeprom. Add use_ext_ref_voltage variable
to struct mcp4725_chip_info to handle this difference.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230903115548.59306-4-biju.das.jz@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add struct mcp4725_chip_info with chan_spec and chip_id variable.
After this simplify probe() by replacing device_get_match_data() and id
lookup for retrieving match data by i2c_get_match_data() by converting
enum->pointer for data in the match table.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230903115548.59306-3-biju.das.jz@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace the variable 'id' from struct mcp4725_data with local variable
chip_id in probe() as the id variable is not used elsewhere in the
driver.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230903115548.59306-2-biju.das.jz@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Simplify adxl345_read_raw() by adding uscale variable to
struct adxl345_chip_info. Also convert variables adxl3{4,7}5_uscale to
macros and use it in OF/ACPI/ID match table.
Drop enum adxl345_device_type as there is no user.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230903090051.39274-3-biju.das.jz@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Convert enum->pointer for data in match data table, so that
device_get_match_data() can do match against OF/ACPI/I2C tables, once i2c
bus type match support added to it.
Add struct adxl345_chip_info and replace enum->adxl345_chip_info in the
match table and simplify adxl345_probe().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230903090051.39274-2-biju.das.jz@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Simpilfy probe() by replacing device_get_match_data() and id lookup for
retrieving match data by using i2c_get_match_data().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230902170529.62297-1-biju.das.jz@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Simpilfy probe() by replacing device_get_match_data() and id lookup for
retrieving match data by using i2c_get_match_data().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230902163233.56449-1-biju.das.jz@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Simpilfy probe() by replacing of_device_get_match_data() and id lookup for
retrieving match data by using i2c_get_match_data() by making similar
OF/I2C/ACPI match tables.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230902162633.50546-1-biju.das.jz@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The comparator generates an edge on the IRQ like and stays in the
configured state until cleared. Support edge triggered IRQs as well
as not all controllers do support level triggered IRQ.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20230831182502.154899-1-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This is the iio driver for Microchip family of 153.6 ksps,
Low-Noise 16/24-Bit Delta-Sigma ADCs with an SPI interface
(Microchip's MCP3461, MCP3462, MCP3464, MCP3461R, MCP3462R,
MCP3464R, MCP3561, MCP3562, MCP3564, MCP3561R,
MCP3562R and MCP3564R analog to digital converters).
Signed-off-by: Marius Cristea <marius.cristea@microchip.com>
Link: https://lore.kernel.org/r/20230829154133.40716-3-marius.cristea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This is the device tree schema for iio driver for
Microchip family of 153.6 ksps, Low-Noise 16/24-Bit
Delta-Sigma ADCs with an SPI interface (Microchip's
MCP3461, MCP3462, MCP3464, MCP3461R, MCP3462R,
MCP3464R, MCP3561, MCP3562, MCP3564, MCP3561R,
MCP3562R and MCP3564R analog to digital converters).
Signed-off-by: Marius Cristea <marius.cristea@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230829154133.40716-2-marius.cristea@microchip.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The LTC2309 is an 8-Channel, 12-Bit SAR ADC with an I2C Interface.
This implements support for all single-ended and differential channels,
in unipolar mode only.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Link: https://lore.kernel.org/r/20230828-ltc2309-v3-2-338b3a8fab8b@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add devicetree bindings for the Linear Technology LTC2309 ADC driver.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Link: https://lore.kernel.org/r/20230828-ltc2309-v3-1-338b3a8fab8b@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use complete device name prefix in the input current offset getter
function.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20230830094314.26353-1-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
of_match_device() may fail and returns a NULL pointer.
In practice there is no known reasonable way to trigger this, but
in case one is added in future, harden the code by adding the check
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Link: https://lore.kernel.org/r/tencent_994DA85912C937E3B5405BA960B31ED90A08@qq.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for delta angle and delta velocity raw and buffer
readings to adis16475 driver.
Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20230808075059.645525-4-ramona.bolboaca@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The delta velocity is defined as a piece-wise integration of
acceleration data. The delta velocity represents the linear velocity
change between two consecutive measurements and it
is measured in m / s (meters per second).
In order to track the total linear velocity change during a desired
period of time, simply sum-up the delta velocity samples acquired
during that time.
IIO currently does not offer a suitable channel type for this
type of measurements hence this patch adds it.
Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20230808075059.645525-3-ramona.bolboaca@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The delta angle is defined as a piece-wise integration of angular
velocity data. The delta angle represents the amount of
angular displacement between two consecutive measurements and it
is measured in radians.
In order to track the total angular displacement during a desired
period of time, simply sum-up the delta angle samples acquired
during that time.
IIO currently does not offer a suitable channel type for this
type of measurements hence this patch adds it.
Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20230808075059.645525-2-ramona.bolboaca@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There is nothing from string_helpers.h used in the driver, correct
the header inclusion block accordingly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Link: https://lore.kernel.org/r/20230808164152.66748-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There is nothing from string_helpers.h used in the driver, correct
the header inclusion block accordingly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20230808164204.66818-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Commit 0f3a8c3f34 ("iio: Add support for creating IIO devices via configfs")
declared but never implemented iio_sw_device_type_configfs_{un}register().
Commit b662f809d4 ("iio: core: Introduce IIO software triggers") declared but
never implemented iio_sw_trigger_type_configfs_{un}register().
Commit a3e0b51884 ("iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers")
declared but never implemented fxls8962af_core_remove().
Commit 8dedcc3eee ("iio: core: centralize ioctl() calls to the main chardev")
declared but never implemented iio_device_ioctl().
Commit d430f3c36c ("iio: imu: inv_mpu6050: Use regmap instead of i2c specific functions")
removed inv_mpu6050_write_reg() but not its declaration.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20230811095701.35372-1-yuehaibing@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Convert enum->pointer for data in the match tables, so that
device_get_match_data() can do match against OF/ACPI/I2C tables, once i2c
bus type match support added to it.
Add struct tmp11x_info and replace enum->struct *tmp11x_info for data in
the match table. Drop tmp117_identify() and simplify tmp117_probe() by
replacing device_get_match_data() and id lookup for retrieving data by
i2c_get_match_data().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20230812161154.196555-1-biju.das.jz@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace device_get_match_data()->i2c_get_match_data() to extend matching
support for ID table.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Stefan Windfeldt-Prytz <stefan.windfeldt-prytz@axis.com>
Tested-by: Stefan Windfeldt-Prytz <stefan.windfeldt-prytz@axis.com>
Link: https://lore.kernel.org/r/20230812151908.188696-1-biju.das.jz@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace device_get_match_data()->i2c_get_match_data by making similar I2C
and DT-based matching table to extend matching support for ID table.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230812150838.185055-1-biju.das.jz@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Convert enum->pointer for data in the ID table, so that
device_get_match_data() can do match against OF/ACPI/I2C tables, once i2c
bus type match support added to it.
Replace enum->struct *ds1803_cfg for data in the ID table and simplify
ds1803_probe() by replacing device_get_match_data() with
i2c_get_match_data().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230812144106.163355-1-biju.das.jz@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Convert enum->pointer for data in the match tables, so that
device_get_match_data() can do match against OF/ACPI/I2C tables, once i2c
bus type match support added to it.
Add product_id variable to struct sgp_device and remove the local variable
product_id in probe() and replace enum->struct *sgp_device for data in the
match table. Simplify theprobe() by replacing device_get_match_data() and
ID lookup for retrieving data by i2c_get_match_data().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230812165730.216180-1-biju.das.jz@bp.renesas.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Added support for HMC540SLP3E broadband 4-bit Silicon IC digital
attenuator with a 15 dB control range and wide frequency coverage
(0.1 to 8 GHz).
Signed-off-by: Ana-Maria Cusco <ana-maria.cusco@analog.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230816110906.144540-2-ana-maria.cusco@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This adds support for the Analog Devices HMC540s 1 dB LSB
Silicon MMIC 4-Bit Digital Positive Control Attenuator, 0.1 - 8 GHz
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Ana-Maria Cusco <ana-maria.cusco@analog.com>
Link: https://lore.kernel.org/r/20230816110906.144540-1-ana-maria.cusco@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ALSA sequencer core still delivers events to the disabled UMP Group,
leaving this handling to the device. But it's rather risky and it's
easy to imagine that such an unexpected event may screw up the device
firmware.
This patch avoids the superfluous event deliveries by setting the
group_filter of the UMP client as default, and evaluate the
group_filter properly at delivery from non-UMP clients.
The grouop_filter is updated upon the dynamic UMP Function Block
updates, so that it follows the change of the disabled UMP Groups,
too.
Fixes: d2b7060777 ("ALSA: seq: Add UMP group filter")
Link: https://lore.kernel.org/r/20230912085144.32534-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
MD Danish Anwar says:
====================
Add support for ICSSG on AM64x EVM
This series adds support for ICSSG driver on AM64x EVM.
First patch of the series adds compatible for AM64x EVM in icssg-prueth
dt binding. Second patch adds support for AM64x compatible in the ICSSG
driver.
This series addresses comments on [v1] (which was posted as RFC).
This series is based on the latest net-next/main. This series has no
dependency.
Changes from v1 to v2:
*) Made the compatible list in patch 1 alphanumerically ordered as asked
by Krzysztof.
*) Dropped the RFC tag.
*) Added RB tags of Andrew and Roger.
[v1] https://lore.kernel.org/all/20230830113724.1228624-1-danishanwar@ti.com/
====================
Link: https://lore.kernel.org/r/20230911054308.2163076-1-danishanwar@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add AM64x ICSSG support which is similar to am65x SR2.0, but required:
- all ring configured in exposed ring mode
- always fill both original and buffer fields in cppi5 desc
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add compatible for AM64x in icssg-prueth dt bindings. AM64x supports
ICSSG similar to AM65x SR2.0.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for the WMI methods used to turn off and adjust the
brightness of the secondary "screenpad" device found on some high-end
ASUS laptops like the GX650P series and others.
There are some small quirks with this device when considering only the
raw WMI methods:
1. The Off method can only switch the device off
2. Changing the brightness turns the device back on
3. To turn the device back on the brightness must be > 1
4. When the device is off the brightness can't be changed (so it is
stored by the driver if device is off).
5. Booting with a value of 0 brightness (retained by bios) means the bios
will set a value of >0 <15
6. When the device is off it is "unplugged"
asus_wmi sets the minimum brightness as 20 in general use, and 60 for
booting with values <= min.
The ACPI methods are used in a new backlight device named asus_screenpad.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230830032237.42987-2-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add a comment explaining why the special x86_android_tablet_get_gpiod()
helper is necessary for some of the GPIOs used in the x86-android-tablets;
and that for normal GPIO lookups this example should not be followed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230911210928.264908-1-hdegoede@redhat.com
Detailed error message is already printed at the end of the function, so
drop redundant one a few lines earlier.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230909063613.2867-2-jernej.skrabec@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Simpilfy probe() by replacing of_device_get_match_data() and ID lookup for
retrieving match data by i2c_get_match_data().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230909110459.12453-1-biju.das.jz@bp.renesas.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add system pm ops to save and restore pinctrl registers
when suspending and resuming the driver, respectively.
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20230905122105.117000-3-hal.feng@starfivetech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The issue was found when we enabled CONFIG_PM and tested edge events using
libgpiod.
> # gpiomon -r gpiochip0 55
> gpiomon: error waiting for events: Permission denied
`gpiomon` will call irq_chip_pm_get() and then call pm_runtime_resume_and_get()
if (IS_ENABLED(CONFIG_PM) && sfp->gc.irq.domain->pm_dev).
pm_runtime_resume_and_get() will fail if the runtime pm of pinctrl device
is disabled.
As we expect the pinctrl driver can be always working and never suspend
during runtime, unset sfp->gc.irq.domain->pm_dev to make sure
pm_runtime_resume_and_get() won't be called when setting irq.
Fixes: 447976ab62 ("pinctrl: starfive: Add StarFive JH7110 sys controller driver")
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20230905122105.117000-2-hal.feng@starfivetech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
gpiochip_get_desc() now lives in linux/gpio/driver.h and there is no
longer any need to include GPIOLIB's private header.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
It makes sense for a GPIO driver to want to get its own descriptor
without requesting it. After all, the driver knows that it'll still be
valid. Let's move this helper to linux/gpio/driver.h.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>