The last member of the enum is meant to count the items,
but sparse cannot increment the previous member due to
its bitwise type. Declaring the last entry with a value
doesn't work either (cannot mix bitwise/non-bitwise) and
declaring it with a bitwise value doesn't work due to
the way it gets used. This led to the current construct.
However, that construct the kernel-doc script doesn't
understand this construct due to the use of #ifdef/#else.
Find another solution that makes both tools happy, we
do now do declare it as the bitwise value but then just
redefine it so that doesn't get used, all still under
__CHECKER__ conditional.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230830112059.44bdf6a5fa9e.I9f1ea129f89e53043d48676aed0a3b8f6c31ac08@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Don't use variable err uninitialized.
The reason for removing the check instead of initializing it
in the beginning of the function is because that way
static checkers will be able to catch issues if we do something
wrong in the future.
Fixes: bf976c814c ("wifi: iwlwifi: mvm: implement link change ops")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230830112059.431b01bd8779.I31fc4ab35f551b85a10f974a6b18fc30191e9c35@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In case the user sets the enable_ini to some preset, we want to honor
the value.
Remove the ops to set the value of the module parameter is runtime, we
don't want to allow to modify the value in runtime since we configure
the firmware once at the beginning on its life.
Fixes: b49c2b252b ("iwlwifi: Configure FW debug preset via module param.")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230830112059.5734e0f374bb.I6698eda8ed2112378dd47ac5d62866ebe7a94f77@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If there's an alternative link to use while the CSA is in
progress, there's no need to disconnect since another link
is still usable during the switching time. Change the code
here to handle that accordingly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230830112059.dd1b96a37e51.Idafdcbfcb36ca4c486f4221aef77643869331514@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the spec, CSA is defined roughly as follows:
- TBTT x: beacon with CSA, count=n (old channel)
- TBTT x+1: beacon with CSA, count=n-1 (old channel)
- TBTT x+n-1: beacon with CSA, count=1 (old channel)
"A Channel Switch Count field set to 1 indicates that the switch
occurs immediately before the next TBTT.
- TBTT x+n: beacon without CSA (new channel)
When we detect it, we currently schedule the CSA event to
be at 10 TUs before TBTT x+n-1, for a beacon interval, to
give us quiet time.
When this event *starts*, we currently notify mac80211
that the channel switch happened, which causes us to add
a session protection event to listen for the first beacon
(and enable TX etc. when that arrives).
We don't even ask for a notification when this event ends
so the code that handles that is effectively dead code.
The session protection duration is 3 beacon intervals,
scheduled at 10 TU before TBTT x+n-1. It will thus end
just before TBTT x+n+2.
Unfortunately, if the AP doesn't transmit or we miss just
the first two beacons on the new channel, then this will
cause us to disconnect. Or even just one, if the AP isn't
quite aligned with the TBTT after the switch.
However, listening to the _end_ of the time event isn't
what we want either, because we want all the new PHY and
other config that needs to come from mac80211 to start
early, so we have a head-start for the new channel, since
we're not going to use the old one anyway for this time.
So since we don't really have anything better to do at
this time, and this is relatively rare, just make the
session protection use 5x the beacon interval instead of
just 3x, so it's more likely we catch a beacon even if
the AP neglected to send it, or we just miss it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230830112059.a74176bac37c.I029a2ebcd1b5012327c728ffa1d33fac19cfdf4b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pass the right link_id to ieee80211_chswitch_done.
Use the link_conf parameter passed to post_channel_switch() to get the
right ap_sta_id.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230830112059.19470584fa51.Iad38b5369bededaa126b3eb3cff79f23d61bd783@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When user space transmits a management frame it is expected to use
the MLD addresses if the connection is an MLD one. Thus, in case
the management Tx is using the MLD address and no channel is configured
off-channel should not be used (as one of the active links would be used).
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230827135854.73c8efce252f.Ie4b0a842debb24ef25c5e6cb2ad69b9f46bc4b2a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The code that sets up the assoc link will currently take the BSS
element data from the beacon only. This is correct for some of
the data, notably the timing and the "have_beacon", but all the
data about MBSSID and EHT really doesn't need to be taken from
there, and if the EHT puncturing is misconfigured on the AP but
we didn't receive a beacon yet, this causes us to connect but
immediately disconnect upon receiving the first beacon, rather
than connecting without EHT in the first place.
Change the code to take MBSSID and EHT data also from the probe
response, for a better picture of what the BSS capabilities are
and to avoid that EHT puncturing problem.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230827135854.3c7e52d49482.Iba6b672f6dc74b45bba26bc497e953e27da43ef9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During my refactoring I wanted to get rid of the switch,
but replaced it with the wrong calculation. Fix that.
Fixes: 175ad2ec89 ("wifi: mac80211: limit A-MSDU subframes for client too")
Reported-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230827135854.51bf1b8b0adb.Iffbd337fdad2b86ae12f5a39c69fb82b517f7486@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The sta info needs to be inserted before its links may be modified.
Add a few warnings to prevent accidental usage of these functions.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230827135854.eeb43b3cc9e3.I5fd8236f70e64bf6268f33c883f7a878d963b83e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This allows to finalize the CSA per link.
In case the switch didn't work, tear down the MLD connection.
Also pass the ieee80211_bss_conf to post_channel_switch to let the
driver know which link completed the switch.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230828130311.3d3eacc88436.Ic2d14e2285aa1646216a56806cfd4a8d0054437c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Handling of BSS_CHANGED_PS was missing in vif_cfg_changed
callback. Fix it.
Fixes: 22c5883435 ("wifi: iwlwifi: mvm: replace bss_info_changed() with vif_cfg/link_info_changed()")
Reported-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230905162939.5ef0c8230de6.Ieed265014988c50ec68fbff6d33821e4215f987f@changeid
[note: patch looks bigger than it is due to reindentation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Many regulatories can have HE/EHT Operation as not permitted. In such
cases, AP should not be allowed to start if it is using a channel
having the no operation flag set. However, currently there is no such
check in place.
Fix this issue by validating such IEs sent during start AP against the
channel flags.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230905064857.1503-1-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When connect to MLO AP with more than one link, and the assoc response of
AP is not success, then cfg80211_unhold_bss() is not called for all the
links' cfg80211_bss except the primary link which means the link used by
the latest successful association request. Thus the hold value of the
cfg80211_bss is not reset to 0 after the assoc fail, and then the
__cfg80211_unlink_bss() will not be called for the cfg80211_bss by
__cfg80211_bss_expire().
Then the AP always looks exist even the AP is shutdown or reconfigured
to another type, then it will lead error while connecting it again.
The detail info are as below.
When connect with muti-links AP, cfg80211_hold_bss() is called by
cfg80211_mlme_assoc() for each cfg80211_bss of all the links. When
assoc response from AP is not success(such as status_code==1), the
ieee80211_link_data of non-primary link(sdata->link[link_id]) is NULL
because ieee80211_assoc_success()->ieee80211_vif_update_links() is
not called for the links.
Then struct cfg80211_rx_assoc_resp resp in cfg80211_rx_assoc_resp() and
struct cfg80211_connect_resp_params cr in __cfg80211_connect_result()
will only have the data of the primary link, and finally function
cfg80211_connect_result_release_bsses() only call cfg80211_unhold_bss()
for the primary link. Then cfg80211_bss of the other links will never free
because its hold is always > 0 now.
Hence assign value for the bss and status from assoc_data since it is
valid for this case. Also assign value of addr from assoc_data when the
link is NULL because the addrs of assoc_data and link both represent the
local link addr and they are same value for success connection.
Fixes: 81151ce462 ("wifi: mac80211: support MLO authentication/association with one link")
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Link: https://lore.kernel.org/r/20230825070055.28164-1-quic_wgong@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In mesh_fast_tx_flush_addr() we already hold the lock, so
don't need additional hashtable RCU protection. Use the
rhashtable_lookup_fast() variant to avoid RCU protection
warnings.
Fixes: d5edb9ae8d ("wifi: mac80211: mesh fast xmit support")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
1. Following the ARM SMC32 calling convention, the return value
from secure monitor is a 32-bit signed integer. This patch changes
the type of the return value of the function meson_sm_call().
2. Now, when meson_sm_call() returns a 32-bit signed integer, we need
to ensure that this value is not negative. It is important to check
that the return value is not negative in both the meson_sm_call_read()
and meson_sm_call_write() functions.
3. Add a comment explaining why it is necessary to check if the SMC
return value is equal to 0 in the function meson_sm_call_read().
It is not obvious when reading this code.
Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230830140850.17130-1-avromanov@salutedevices.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add the compatible for the Amlogic A1 Based AD402 board.
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230823213630.12936-16-ddrokosov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add node for board info registers, which allows getting SoC family and
board revision.
For example, with MESON_GX_SOCINFO config enabled we can get the
following information for board with Meson A1 SoC:
soc soc0: Amlogic Meson A1 (A113L) Revision 2c:a (1:a) Detected
Signed-off-by: Alexey Romanov <avromanov@sberdevices.ru>
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230823213630.12936-14-ddrokosov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The definition is inspired by a similar one for AXG SoC family.
'sdio_pins' and 'sdio_clk_gate_pins' pinctrls are supposed to be used as
"default" and "clk-gate" in board-specific device trees.
During initialization 'meson-gx' driver sets clock to safe low-frequency
value (400kHz). However, both source clocks ("clkin0" and "clkin1") are
high-frequency by default, and using of eMMC's internal divider is not
enough to achieve so low values. To provide low-frequency source,
reparent "sd_emmc_sel2" clock using 'assigned-clocks' property.
Signed-off-by: Jan Dakinevich <yvdakinevich@sberdevices.ru>
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230823213630.12936-11-ddrokosov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The Amlogic A1 has a UART_AO port, which can be used, for example, for
BT HCI H4 connection.
This patch adds mux definitions for it.
Signed-off-by: Oleg Lyovin <ovlevin@sberdevices.ru>
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230823213630.12936-10-ddrokosov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
This controller can be used for spinand flash connection.
Signed-off-by: Martin Kurbanov <mmkurbanov@sberdevices.ru>
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230823213630.12936-9-ddrokosov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Amlogic A1 SoC family has USB2.0 controller based on dwc2 and dwc3
heads. It supports otg/host/peripheral modes.
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230823213630.12936-7-ddrokosov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
This patch adds clkc and clkc_pll dts nodes to A1 SoC main dtsi. The
first one is responsible for all SoC peripherals clocks excluding audio
clocks. The second one is used by A1 SoC PLLs. Actually, there are two
different APB heads, so we have two different drivers.
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230823213630.12936-6-ddrokosov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
It is recommended to maintain a sorted order of device tree entries, so
move the gpio_intc node ahead of the uart_AO node.
Fixes: ea254644a2 ("arm64: dts: meson-a1: add gpio_intc node")
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230823213630.12936-5-ddrokosov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
In the file 'meson-a1.dtsi,' which is a basic device tree include, it is
not necessary to mark the node with 'status = "okay"' because it is
enabled by default.
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230823213630.12936-4-ddrokosov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
There should be only one empty line between device tree node
definitions.
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230823213630.12936-3-ddrokosov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
It is recommended to alphabetically sort all headers included in the
dtsi.
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230823213630.12936-2-ddrokosov@sberdevices.ru
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add the IR controller device of Meson-S4 SoC family.
Signed-off-by: Zelong Dong <zelong.dong@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230825115310.39993-4-zelong.dong@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>