Commit graph

1,233,462 commits

Author SHA1 Message Date
Javier Carrasco
9eeba919dd
drm/connector: document DRM_MODE_COLORIMETRY_COUNT
The drm_colorspace enum member DRM_MODE_COLORIMETRY_COUNT has been
properly documented by moving the description out of the enum to the
member description list to get rid of an additional warning and improve
documentation clarity.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906-topic-drm_connector_doc-v2-1-1f2dcaa43269@gmail.com
2023-09-07 16:32:21 +02:00
Ville Syrjälä
231b1d6c9a drm/i915/dsb: Don't use indexed writes when byte enables are not all set
The indexed write instruction doesn't support byte-enables, so
if the non-indexed write used those we must not convert it to
an indexed write.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606191504.18099-8-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
2023-09-07 15:44:41 +03:00
Ville Syrjälä
088ca02108 drm/i915/dsb: Avoid corrupting the first register write
i915_gem_object_create_internal() does not hand out zeroed
memory. Thus we may confuse whatever stale garbage is in
there as a previous register write and mistakenly handle the
first actual register write as an indexed write. This can
end up corrupting the instruction sufficiently well to lose
the entire register write.

Make sure we've actually emitted a previous instruction before
attemting indexed register write merging.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606191504.18099-7-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
2023-09-07 15:44:16 +03:00
Ville Syrjälä
9055e73e8e drm/i915/dsb: Dump the DSB command buffer when DSB fails
Dump the full DSB command buffers and head/tail pointers if the
the DSB hasn't completed its job in time.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606191504.18099-4-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
2023-09-07 15:43:29 +03:00
Ville Syrjälä
61ae124009 drm/i915: Constify LUT entries in checker
The LUT checker doesn't modify the LUT entries so make them const.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606191504.18099-2-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
2023-09-07 15:40:06 +03:00
Christoph Hellwig
4952801fc6 Revert "printk: export symbols for debug modules"
This reverts commit 3e00123a13.

No, we never export random symbols for out of tree modules.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230905081902.321778-1-hch@lst.de
2023-09-07 14:19:42 +02:00
Takashi Iwai
ecc8b4d0b6 ASoC: Fixes for v6.6
A bunch of fixes and new IDs that came in since the initial pull request
 - all driver specific and nothing too exciting.
 
 There's a trivial conflict in the AMD driver ID table due to the last
 v6.5 fixes not having been merged up.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmT5uzEACgkQJNaLcl1U
 h9D1RAf/SrPNpWDm5nX0suSQiNqxyzeT+deZtYtKGaF0/rMdOLsnqQyPKV25s9xS
 bqdI03oFMPfXOqfPW9F+4bmFBuWlL2kl1n1HZIx/bm8/lDCEBQVOXpOl56lHJpPv
 I91dh/1eVUp20FtPwaLwMgPpVb/iJvVSol/IuSvjXICggDY2091F05nBWef2z93S
 3tRVkDX4p+Ywra9lFexV0goRL/bCfdMSG8GHHurdVWB4y6fI1LC6eoPEYsLujzvx
 92//HR7mx11uo9Kf+SiHBJVgZAzW9pJXpnjgTx3X/Isrfxv8h/MnSR3btUKDp3Ti
 okxLvCujDZVhbVP6DiJEuCmXr0OXdQ==
 =abtH
 -----END PGP SIGNATURE-----

Merge tag 'asoc-fix-v6.6-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.6

A bunch of fixes and new IDs that came in since the initial pull request
- all driver specific and nothing too exciting.

There's a trivial conflict in the AMD driver ID table due to the last
v6.5 fixes not having been merged up.
2023-09-07 14:10:36 +02:00
Paolo Abeni
7153a404fb netfilter pull request 2023-09-06
-----BEGIN PGP SIGNATURE-----
 
 iQJBBAABCAArFiEEgKkgxbID4Gn1hq6fcJGo2a1f9gAFAmT4pk0NHGZ3QHN0cmxl
 bi5kZQAKCRBwkajZrV/2AFILEADUXdj4PWEZv0/1avh+cT14q4gM0KkNi0eWDePA
 kRRTvuVZd6CkAxMNW9EAa6koJdK7k7dq2Jax9MYgzvvkFBO5PH5HHvwQRjs+Ch4W
 WCckV83J0W2eTcPqSxTM6wbSL8p1a0rJSHVSG7N431dPQUJoMnmd4zW5q1P9qTkv
 gqE4iQoK2jGL01GOyuQLnh6fEH2TUviguXZPKxVymoy/pbBiDA1mAMQplyAJisAz
 c1lAb+/oW58xYpxTOCtlU3kqB4tPonUow8x8KkYrlZlrA8rxgr2WkVeg82eVXP9u
 X8DM/nSzxCY7aN3TVrS2m8dS1cK1Gj841atuPA2N9ot/R954h7VjxhvhW1IEpmY9
 P6EYvRrLtCZrif4cmbRY4n6UztFNo3FJeBgmM3pgiVQhCXm+1fpNnSTm3QvZY1YO
 6o5rQn7F7IiIzkBeQ5sPihQPvLqn+J/61ZyQWAdP/TAG+roC0ARPeEFjyBoRHttI
 uw4PcXuzrMjBzym816h8kAjJbVIygpZFIpA/QllN8d3rB96mWpFCILIBG9FnA91K
 Ie6IyRGjDKfe5TuJplSIfCdBrvOPqUjc+l7XAPz9QXL8W3MQnYZshHRs5ViSOaca
 iMhMScBYT31uBZ7KODYxgPcifr0EWSYIGceWnSCDOmRz+VJk1LSfvZTwvqOB+qZ3
 x01bTw==
 =Z3CA
 -----END PGP SIGNATURE-----

Merge tag 'nf-23-09-06' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf

Florian Westphal says:

====================
netfilter updates for net

This PR contains nf_tables updates for your *net* tree.
This time almost all fixes are for old bugs:

First patch fixes a 4-byte stack OOB write, from myself.
This was broken ever since nftables was switches from 128 to 32bit
register addressing in v4.1.

2nd patch fixes an out-of-bounds read.
This has been broken ever since xt_osf got added in 2.6.31, the bug
was then just moved around during refactoring, from Wander Lairson Costa.

3rd patch adds a missing enum description, from Phil Sutter.

4th patch fixes a UaF inftables that occurs when userspace adds
elements with a timeout so small that expiration happens while the
transaction is still in progress.  Fix from Pablo Neira Ayuso.

Patch 5 fixes a memory out of bounds access, this was
broken since v4.20. Patch from Kyle Zeng and Jozsef Kadlecsik.

Patch 6 fixes another bogus memory access when building audit
record. Bug added in the previous pull request, fix from Pablo.

netfilter pull request 2023-09-06

* tag 'nf-23-09-06' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: Unbreak audit log reset
  netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
  netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
  netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID
  netfilter: nfnetlink_osf: avoid OOB read
  netfilter: nftables: exthdr: fix 4-byte stack OOB write
====================

Link: https://lore.kernel.org/r/20230906162525.11079-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-07 11:47:15 +02:00
Will Deacon
8bd795fedb arm64: csum: Fix OoB access in IP checksum code for negative lengths
Although commit c2c24edb1d ("arm64: csum: Fix pathological zero-length
calls") added an early return for zero-length input, syzkaller has
popped up with an example of a _negative_ length which causes an
undefined shift and an out-of-bounds read:

 | BUG: KASAN: slab-out-of-bounds in do_csum+0x44/0x254 arch/arm64/lib/csum.c:39
 | Read of size 4294966928 at addr ffff0000d7ac0170 by task syz-executor412/5975
 |
 | CPU: 0 PID: 5975 Comm: syz-executor412 Not tainted 6.4.0-rc4-syzkaller-g908f31f2a05b #0
 | Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023
 | Call trace:
 |  dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:233
 |  show_stack+0x2c/0x44 arch/arm64/kernel/stacktrace.c:240
 |  __dump_stack lib/dump_stack.c:88 [inline]
 |  dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106
 |  print_address_description mm/kasan/report.c:351 [inline]
 |  print_report+0x174/0x514 mm/kasan/report.c:462
 |  kasan_report+0xd4/0x130 mm/kasan/report.c:572
 |  kasan_check_range+0x264/0x2a4 mm/kasan/generic.c:187
 |  __kasan_check_read+0x20/0x30 mm/kasan/shadow.c:31
 |  do_csum+0x44/0x254 arch/arm64/lib/csum.c:39
 |  csum_partial+0x30/0x58 lib/checksum.c:128
 |  gso_make_checksum include/linux/skbuff.h:4928 [inline]
 |  __udp_gso_segment+0xaf4/0x1bc4 net/ipv4/udp_offload.c:332
 |  udp6_ufo_fragment+0x540/0xca0 net/ipv6/udp_offload.c:47
 |  ipv6_gso_segment+0x5cc/0x1760 net/ipv6/ip6_offload.c:119
 |  skb_mac_gso_segment+0x2b4/0x5b0 net/core/gro.c:141
 |  __skb_gso_segment+0x250/0x3d0 net/core/dev.c:3401
 |  skb_gso_segment include/linux/netdevice.h:4859 [inline]
 |  validate_xmit_skb+0x364/0xdbc net/core/dev.c:3659
 |  validate_xmit_skb_list+0x94/0x130 net/core/dev.c:3709
 |  sch_direct_xmit+0xe8/0x548 net/sched/sch_generic.c:327
 |  __dev_xmit_skb net/core/dev.c:3805 [inline]
 |  __dev_queue_xmit+0x147c/0x3318 net/core/dev.c:4210
 |  dev_queue_xmit include/linux/netdevice.h:3085 [inline]
 |  packet_xmit+0x6c/0x318 net/packet/af_packet.c:276
 |  packet_snd net/packet/af_packet.c:3081 [inline]
 |  packet_sendmsg+0x376c/0x4c98 net/packet/af_packet.c:3113
 |  sock_sendmsg_nosec net/socket.c:724 [inline]
 |  sock_sendmsg net/socket.c:747 [inline]
 |  __sys_sendto+0x3b4/0x538 net/socket.c:2144

Extend the early return to reject negative lengths as well, aligning our
implementation with the generic code in lib/checksum.c

Cc: Robin Murphy <robin.murphy@arm.com>
Fixes: 5777eaed56 ("arm64: Implement optimised checksum routine")
Reported-by: syzbot+4a9f9820bd8d302e22f7@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/000000000000e0e94c0603f8d213@google.com
Signed-off-by: Will Deacon <will@kernel.org>
2023-09-07 10:15:20 +01:00
Paolo Abeni
35494b0d61 Merge branch 'there-are-some-bugfix-for-the-hns3-ethernet-driver'
Jijie Shao says:

====================
There are some bugfix for the HNS3 ethernet driver
====================

Link: https://lore.kernel.org/r/20230906072018.3020671-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-07 11:08:06 +02:00
Jie Wang
60326634f6 net: hns3: remove GSO partial feature bit
HNS3 NIC does not support GSO partial packets segmentation. Actually tunnel
packets for example NvGRE packets segment offload and checksum offload is
already supported. There is no need to keep gso partial feature bit. So
this patch removes it.

Fixes: 76ad4f0ee7 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-07 11:08:03 +02:00
Yisen Zhuang
674d9591a3 net: hns3: fix the port information display when sfp is absent
When sfp is absent or unidentified, the port type should be
displayed as PORT_OTHERS, rather than PORT_FIBRE.

Fixes: 88d10bd6f7 ("net: hns3: add support for multiple media type")
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-07 11:08:03 +02:00
Jijie Shao
fa5564945f net: hns3: fix invalid mutex between tc qdisc and dcb ets command issue
We hope that tc qdisc and dcb ets commands can not be used crosswise.
If we want to use any of the commands to configure tc,
We must use the other command to clear the existing configuration.

However, when we configure a single tc with tc qdisc,
we can still configure it with dcb ets.
Because we use mqprio_active as the tag of tc qdisc configuration,
but with dcb ets, we do not check mqprio_active.

This patch fix this issue by check mqprio_active before
executing the dcb ets command. and add dcb_ets_active to
replace HCLGE_FLAG_DCB_ENABLE and HCLGE_FLAG_MQPRIO_ENABLE
at the hclge layer,

Fixes: cacde272dd ("net: hns3: Add hclge_dcb module for the support of DCB feature")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-07 11:08:03 +02:00
Hao Chen
c295160b1d net: hns3: fix debugfs concurrency issue between kfree buffer and read
Now in hns3_dbg_uninit(), there may be concurrency between
kfree buffer and read, it may result in memory error.

Moving debugfs_remove_recursive() in front of kfree buffer to ensure
they don't happen at the same time.

Fixes: 5e69ea7ee2 ("net: hns3: refactor the debugfs process")
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-07 11:08:03 +02:00
Hao Chen
efccf655e9 net: hns3: fix byte order conversion issue in hclge_dbg_fd_tcam_read()
req1->tcam_data is defined as "u8 tcam_data[8]", and we convert it as
(u32 *) without considerring byte order conversion,
it may result in printing wrong data for tcam_data.

Convert tcam_data to (__le32 *) first to fix it.

Fixes: b5a0b70d77 ("net: hns3: refactor dump fd tcam of debugfs")
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-07 11:08:03 +02:00
Jijie Shao
dd2bbc2ef6 net: hns3: Support query tx timeout threshold by debugfs
support query tx timeout threshold by debugfs

Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-07 11:08:03 +02:00
Jian Shen
61a1deacc3 net: hns3: fix tx timeout issue
Currently, the driver knocks the ring doorbell before updating
the ring->last_to_use in tx flow. if the hardware transmiting
packet and napi poll scheduling are fast enough, it may get
the old ring->last_to_use in drivers' napi poll.
In this case, the driver will think the tx is not completed, and
return directly without clear the flag __QUEUE_STATE_STACK_XOFF,
which may cause tx timeout.

Fixes: 20d06ca267 ("net: hns3: optimize the tx clean process")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-09-07 11:08:03 +02:00
Kailang Yang
e43252db7e ALSA: hda/realtek - ALC287 I2S speaker platform support
0x17 was only speaker pin, DAC assigned will be 0x03. Headphone
assigned to 0x02.
Playback via headphone will get EQ filter processing. So,it needs to
swap DAC.

Tested-by: Mark Pearson <mpearson@lenovo.com>
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/4e4cfa1b3b4c46838aecafc6e8b6f876@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-09-07 10:33:04 +02:00
Thomas Hellström
d20b484c67 drm/drm_exec: Work around a WW mutex lockdep oddity
If *any* object of a certain WW mutex class is locked, lockdep will
consider *all* mutexes of that class as locked. Also the lock allocation
tracking code will apparently register only the address of the first
mutex of a given class locked in a sequence.
This has the odd consequence that if that first mutex is unlocked while
other mutexes of the same class remain locked and then its memory then
freed, the lock alloc tracking code will incorrectly assume that memory
is freed with a held lock in there.

For now, work around that for drm_exec by releasing the first grabbed
object lock last.

v2:
- Fix a typo (Danilo Krummrich)
- Reword the commit message a bit.
- Add a Fixes: tag

Related lock alloc tracking warning:
[  322.660067] =========================
[  322.660070] WARNING: held lock freed!
[  322.660074] 6.5.0-rc7+ #155 Tainted: G     U           N
[  322.660078] -------------------------
[  322.660081] kunit_try_catch/4981 is freeing memory ffff888112adc000-ffff888112adc3ff, with a lock still held there!
[  322.660089] ffff888112adc1a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x11a/0x600 [drm_exec]
[  322.660104] 2 locks held by kunit_try_catch/4981:
[  322.660108]  #0: ffffc9000343fe18 (reservation_ww_class_acquire){+.+.}-{0:0}, at: test_early_put+0x22f/0x490 [drm_exec_test]
[  322.660123]  #1: ffff888112adc1a0 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x11a/0x600 [drm_exec]
[  322.660135]
               stack backtrace:
[  322.660139] CPU: 7 PID: 4981 Comm: kunit_try_catch Tainted: G     U           N 6.5.0-rc7+ #155
[  322.660146] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 0403 01/26/2021
[  322.660152] Call Trace:
[  322.660155]  <TASK>
[  322.660158]  dump_stack_lvl+0x57/0x90
[  322.660164]  debug_check_no_locks_freed+0x20b/0x2b0
[  322.660172]  slab_free_freelist_hook+0xa1/0x160
[  322.660179]  ? drm_exec_unlock_all+0x168/0x2a0 [drm_exec]
[  322.660186]  __kmem_cache_free+0xb2/0x290
[  322.660192]  drm_exec_unlock_all+0x168/0x2a0 [drm_exec]
[  322.660200]  drm_exec_fini+0xf/0x1c0 [drm_exec]
[  322.660206]  test_early_put+0x289/0x490 [drm_exec_test]
[  322.660215]  ? __pfx_test_early_put+0x10/0x10 [drm_exec_test]
[  322.660222]  ? __kasan_check_byte+0xf/0x40
[  322.660227]  ? __ksize+0x63/0x140
[  322.660233]  ? drmm_add_final_kfree+0x3e/0xa0 [drm]
[  322.660289]  ? _raw_spin_unlock_irqrestore+0x30/0x60
[  322.660294]  ? lockdep_hardirqs_on+0x7d/0x100
[  322.660301]  ? __pfx_kunit_try_run_case+0x10/0x10 [kunit]
[  322.660310]  ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [kunit]
[  322.660319]  kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit]
[  322.660328]  kthread+0x2e7/0x3c0
[  322.660334]  ? __pfx_kthread+0x10/0x10
[  322.660339]  ret_from_fork+0x2d/0x70
[  322.660345]  ? __pfx_kthread+0x10/0x10
[  322.660349]  ret_from_fork_asm+0x1b/0x30
[  322.660358]  </TASK>
[  322.660818]     ok 8 test_early_put

Cc: Christian König <christian.koenig@amd.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Fixes: 09593216bf ("drm: execution context for GEM buffers v7")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230906095039.3320-4-thomas.hellstrom@linux.intel.com
2023-09-07 10:30:12 +02:00
Helge Deller
e5ef93d02d parisc: BTLB: Initialize BTLB tables at CPU startup
Initialize the BTLB entries when starting up a CPU.
Note that BTLBs are not available on 64-bit CPUs.

Signed-off-by: Helge Deller <deller@gmx.de>
2023-09-07 09:12:20 +02:00
Helge Deller
3756597a68 parisc: firmware: Simplify calling non-PA20 functions
Instead of usig #ifdefs, simply return PDC_BAD_PROC for functions
which aren't available on 64-bit CPUs.

Signed-off-by: Helge Deller <deller@gmx.de>
2023-09-07 09:12:20 +02:00
Helge Deller
4695e45ec0 parisc: BTLB: _edata symbol has to be page aligned for BTLB support
Signed-off-by: Helge Deller <deller@gmx.de>
2023-09-07 09:12:20 +02:00
Helge Deller
510610f96d parisc: BTLB: Add BTLB insert and purge firmware function wrappers
Signed-off-by: Helge Deller <deller@gmx.de>
2023-09-07 09:12:20 +02:00
Helge Deller
eda205211a parisc: BTLB: Clear possibly existing BTLB entries
Call PDC to remove all existing BTLB entries (which may exist from
some previous operating system runs) before switching to virtual mode.

Signed-off-by: Helge Deller <deller@gmx.de>
2023-09-07 09:12:20 +02:00
Helge Deller
70bd68d5b6 parisc: Prepare for Block-TLB support on 32-bit kernel
Change HUGEPAGE_SIZE to become 4 MB on 32-bit kernels, which leads
that kernel code and kernel data will start on 4 MB boundaries.

Although a 32-bit kernel does not support huge pages, most
machines have support for Block-TLBs (BTLB) which allow to
configure the system to use large pages (block TLBs) to minimize
the TLB contention. This is done through calls to PDC and the
32-bit kernel can then call BTLB PDC functions to tell
the machine to optimize the TLBs.

Signed-off-by: Helge Deller <deller@gmx.de>
2023-09-07 09:12:19 +02:00
Helge Deller
3f091387a3 parisc: shmparam.h: Document aliasing requirements of PA-RISC
Add some documentation why PA-RISC uses SHMLBA and SHM_COLOUR.

Signed-off-by: Helge Deller <deller@gmx.de>
2023-09-07 08:00:32 +02:00
Rand Deeb
e0b5127fa1 ssb: Fix division by zero issue in ssb_calc_clock_rate
In ssb_calc_clock_rate(), there is a potential issue where the value of
m1 could be zero due to initialization using clkfactor_f6_resolv(). This
situation raised concerns about the possibility of a division by zero
error.

We fixed it by following the suggestions provided by Larry Finger
<Larry.Finger@lwfinger.net> and Michael Büsch <m@bues.ch>. The fix
involves returning a value of 1 instead of 0 in clkfactor_f6_resolv().
This modification ensures the proper functioning of the code and
eliminates the risk of division by zero errors.

Signed-off-by: Rand Deeb <rand.sec96@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Michael Büsch <m@bues.ch>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230904232346.34991-1-rand.sec96@gmail.com
2023-09-07 09:00:05 +03:00
Ping-Ke Shih
b227c990de wifi: rtw89: 8922a: set memory heap address for secure firmware
Secure firmware is protected by public/private key cryptography. To help
firmware self verify integrity, configure a heap address for these
data before downloading firmware.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230901073956.54203-9-pkshih@realtek.com
2023-09-07 08:57:16 +03:00
Ping-Ke Shih
38bae445a3 wifi: rtw89: fw: refine download flow to support variant firmware suits
To support download more than one firmware, adjust flow to download
firmware by unit of firmware suit. Then, flow becomes

 1. initial setup - disable/enable_wcpu
 2. for all firmware suits
 2.1. download WiFi CPU, and check ready
 2.2. download BB MCU, and check ready
 3. check status code to make sure all ready

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230901073956.54203-8-pkshih@realtek.com
2023-09-07 08:57:16 +03:00
Ping-Ke Shih
c6ea2a8391 wifi: rtw89: 8922a: add chip_ops::bb_preinit to enable BB before downloading firmware
Before downloading firmware for BB MCU, call this ops to enable baseband
hardware.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230901073956.54203-7-pkshih@realtek.com
2023-09-07 08:57:16 +03:00
Ping-Ke Shih
a712eef681 wifi: rtw89: fw: propagate an argument include_bb for BB MCU firmware
Though WiFi 7 chips need BB MCU firmware, we don't download it in probe
stage. Instead, only bring interface up under normal operation or WoWLAN
mode. So, add an argument to assist download flow to setup download
settings properly.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230901073956.54203-6-pkshih@realtek.com
2023-09-07 08:57:16 +03:00
Ping-Ke Shih
fa31a8c58d wifi: rtw89: fw: add checking type for variant type of firmware
For WiFi 6 chips, there is only single one firmware i.e. WiFi CPU firmware,
so no need an argument to discriminate them. For WiFi 7 chips, BB MCU
firmware is introduced, and we need to check it ready after downloading.

For each type of firmware, we need to check corresponding hardware ready
bit. After downloading all firmware, check status code to determine if
all things are ready.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230901073956.54203-5-pkshih@realtek.com
2023-09-07 08:57:15 +03:00
Ping-Ke Shih
68261ddbb2 wifi: rtw89: fw: implement supported functions of download firmware for WiFi 7 chips
To work with generalized flow of download firmware, implement WiFi 7
specific functions to support it. These functions include disable/enable
WiFi CPU, status of path ready, and status of firmware.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230901073956.54203-4-pkshih@realtek.com
2023-09-07 08:57:15 +03:00
Ping-Ke Shih
ae4dc23d13 wifi: rtw89: fw: generalize download firmware flow by mac_gen pointers
In order to reuse the flow to download firmware, define some mac_gen::ops
to implement them for WiFi 6 and 7 chips individually. This doesn't change
logic at all.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230901073956.54203-3-pkshih@realtek.com
2023-09-07 08:57:15 +03:00
Ping-Ke Shih
80e706a85c wifi: rtw89: fw: move polling function of firmware path ready to an individual function
To download firmware, we need to check path is ready. There are two kinds
of path -- one is to download firmware header, and the other is to download
firmware body.

Since the polling method is different from WiFi 7 chips, make it to be
an individual function, and then we can reuse the download flow.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230901073956.54203-2-pkshih@realtek.com
2023-09-07 08:57:14 +03:00
Zong-Zhe Yang
6fa25e768d wifi: rtw89: mcc: trigger FW to start/stop MCC
According to Wi-Fi/BT roles' settings, we fill corresponding H2Cs (host
to chip packets). Then, following MCC (multi-channel concurrency) pattern,
we send these H2Cs as planned. Eventually, the trigger H2Cs will be sent
to tell FW to really start/stop MCC.

Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230831053133.24015-7-pkshih@realtek.com
2023-09-07 08:55:40 +03:00
Zong-Zhe Yang
980d4215f9 wifi: rtw89: fix typo of rtw89_fw_h2c_mcc_macid_bitmap()
Fix a typo where `bitamp` should be `bitmap`. Don't change functionality
at all.

Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230831053133.24015-6-pkshih@realtek.com
2023-09-07 08:55:40 +03:00
Zong-Zhe Yang
17aa2c3326 wifi: rtw89: mcc: decide pattern and calculate parameters
After the previous works, we can now expand and display the MCC pattern
in more detail, as shown below.

|<                              MCC interval                            >|
|<   duration ref    >| (if mid bt) |<   duration aux    >| (if tail bt) |
|<tob ref >|< toa ref>|     ...     |<tob aux >|< toa aux>|     ...      |
           V                                   V
       tbtt ref                            tbtt aux
           |<          beacon offset          >|

(where tob means `time offset behind` and toa means `time offset ahead`)

There are two key points.
1. decide position of BT slot if MCC pattern needs to handle BT duration.
2. calculate all parameters related to tob and toa in MCC pattern.

For point (1), when BT duration needs to be handled, BT position will
rely on beacon offset, either middle or tail. For point (2), to ensure
durations of the Wi-Fi roles cover their beacons, we have to calculate
tob and toa for them according to their TBTT.

And, there are two strategies to calculate parameters, strict and loose.
In strict pattern, all parameters take HW time into account as limitation.
But, the strict calculation are not always successful. In loose pattern,
it only tries to give positive parameters to reference role and doesn't
care much about auxiliary role. If unfortunately auxiliary role gets
negative parameters in loose pattern, FW will be notified and then deal
with it. So, the loose calculation won't fail. In general, we always try
strict pattern cases before using a loose pattern.

Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230831053133.24015-5-pkshih@realtek.com
2023-09-07 08:55:39 +03:00
Zong-Zhe Yang
7d1704640a wifi: rtw89: mcc: consider and determine BT duration
Before calculating MCC pattern, we have to determine whether to handle BT
duration in it or not. The decision will depend on the channels that Wi-Fi
roles use. And, we have three cases shown below.
1. non-2GHz + non-2GHz
2. non-2GHz + 2GHz (different band)
3. 2GHz + 2GHz (dual 2GHz)

For case (1), we don't care BT duration in MCC pattern. For case (2), we
still don't care BT duration in MCC pattern. Instead, we try to satisfy it
by modifying duration of Wi-Fi role on non-2GHz channel. For case (3), we
need to modify Wi-Fi durations and also need to handle BT duration in MCC
pattern.

Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230831053133.24015-4-pkshih@realtek.com
2023-09-07 08:55:39 +03:00
Zong-Zhe Yang
4dc25ef191 wifi: rtw89: mcc: fill fundamental configurations
We determine the fundamental settings shown below.

 |<                MCC interval                 >|
 |<    duration ref     >|<    duration aux     >|
 |           |                       |           |
             |<    beacon offset    >|
	     |                       |
             V                       V
         (tbtt ref)              (tbtt aux)

(where `ref` (reference) and `aux` (auxiliary) mean the two MCC roles)

Based on MCC mode (GO+STA or GC+STA), we fill configurations of
MCC interval and beacon offset. And, we make sure each MCC role
have a basically required duration in the MCC interval.

The beacon offset mentioned above is a parameter for further MCC
pattern calculation. If MCC is in GC+STA mode, we will calculate
the real beacon offset through TSFs shown in beacons of both MCC
roles. Otherwise, we will use a default beacon offset, and make
GO sync STA's TSF timer with this offset.

MCC pattern calculation will break down each MCC role's duration
in more detail. We will implement it in the following.

Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230831053133.24015-3-pkshih@realtek.com
2023-09-07 08:55:39 +03:00
Zong-Zhe Yang
b09df09b55 wifi: rtw89: mcc: initialize start flow
We prepare to support TDMA-based MCC (multi-channel concurrency)
which allows two kinds of modes below.
* P2P GO + normal STA
* P2P GC + normal STA

Each mode has two vif and two chanctx. Then, each vif binds one
separate chanctx and becomes one MCC role. We name the two MCC
roles as follows.
* MCC role - reference (ref)
	We calculate the baseline of our TDMA things accodring
	to its info, e.g. TBTT. In normal case, it will be put
	at the first slot of TDMA.
* MCC role - auxiliary (aux)

MCC state machine will be running in FW eventually, but before that,
we have to fill and calculate things that are needed by FW. We fill
the information of MCC role according to its vif and its chanctx.
Then, we calculate the start time for MCC.

Note that the parameters used in the calculation now is assigned by
default rules. The precise parameters for better MCC behavior will be
derived in the following.

Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230831053133.24015-2-pkshih@realtek.com
2023-09-07 08:55:39 +03:00
Steve French
30bded94dc cifs: update internal module version number for cifs.ko
From 2.44 to 2.45

Signed-off-by: Steve French <stfrench@microsoft.com>
2023-09-07 00:06:04 -05:00
Steve French
6a50d71d0f smb3: allow controlling maximum number of cached directories
Allow adjusting the maximum number of cached directories per share
(defaults to 16) via mount parm "max_cached_dirs"

Signed-off-by: Steve French <stfrench@microsoft.com>
2023-09-07 00:06:04 -05:00
Steve French
feeec636b6 smb3: add trace point for queryfs (statfs)
In debugging a recent performance problem with statfs, it would have
been helpful to be able to trace the smb3 query fs info request
more narrowly.  Add a trace point "smb3_qfs_done"

Which displays:

 stat-68950   [008] .....  1472.360598: smb3_qfs_done: xid=14 sid=0xaa9765e4 tid=0x95a76f54 unc_name=\\localhost\test rc=0

Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2023-09-07 00:05:56 -05:00
Huacai Chen
671eae93ae LoongArch: Update Loongson-3 default config file
1, Enable LSX and LASX.
2, Enable KASLR (CONFIG_RANDOMIZE_BASE).
3, Enable jump label (patching mechanism for static key).
4, Enable LoongArch CRC32(c) Acceleration.
5, Enable Loongson-specific drivers: I2C/RTC/DRM/SOC/CLK/PINCTRL/GPIO/SPI.
6, Enable EXFAT/NTFS3/JFS/GFS2/OCFS2/UBIFS/EROFS/CEPH file systems.
7, Enable WangXun NGBE/TXGBE NIC drivers.
8, Enable some IPVS options.
9, Remove CONFIG_SYSFS_DEPRECATED since it is removed in Kconfig.
10, Remove CONFIG_IP_NF_TARGET_CLUSTERIP since it is removed in Kconfig.
11, Remove CONFIG_NFT_OBJREF since it is removed in Kconfig.
12, Remove CONFIG_R8188EU since it is replaced by CONFIG_RTL8XXXU.

Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Xuewen Wang <wangxuewen@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-09-07 12:06:20 +08:00
Lukasz Majewski
08c6d8bae4 net: phy: Provide Module 4 KSZ9477 errata (DS80000754C)
The KSZ9477 errata points out (in 'Module 4') the link up/down problems
when EEE (Energy Efficient Ethernet) is enabled in the device to which
the KSZ9477 tries to auto negotiate.

The suggested workaround is to clear advertisement of EEE for PHYs in
this chip driver.

To avoid regressions with other switch ICs the new MICREL_NO_EEE flag
has been introduced.

Moreover, the in-register disablement of MMD_DEVICE_ID_EEE_ADV.MMD_EEE_ADV
MMD register is removed, as this code is both; now executed too late
(after previous rework of the PHY and DSA for KSZ switches) and not
required as setting all members of eee_broken_modes bit field prevents
the KSZ9477 from advertising EEE.

Fixes: 69d3b36ca0 ("net: dsa: microchip: enable EEE support") # for KSZ9477
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # Confirmed disabled EEE with oscilloscope.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230905093315.784052-1-lukma@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-09-06 20:49:04 -07:00
Lijo Lazar
fbe1a9e0c7 drm/amdgpu: Restrict bootloader wait to SMUv13.0.6
Restrict the wait for boot loader steady state only to SMUv13.0.6. For
older SOCs, ASIC init has a longer wait period and that takes care.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-06 22:11:51 -04:00
Hamza Mahfooz
07e388aab0 drm/amd/display: prevent potential division by zero errors
There are two places in apply_below_the_range() where it's possible for
a divide by zero error to occur. So, to fix this make sure the divisor
is non-zero before attempting the computation in both cases.

Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2637
Fixes: a463b26303 ("drm/amd/display: Fix frames_to_insert math")
Fixes: ded6119e82 ("drm/amd/display: Reinstate LFC optimization")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-06 22:10:11 -04:00
Melissa Wen
57a943ebfc drm/amd/display: enable cursor degamma for DCN3+ DRM legacy gamma
For DRM legacy gamma, AMD display manager applies implicit sRGB degamma
using a pre-defined sRGB transfer function. It works fine for DCN2
family where degamma ROM and custom curves go to the same color block.
But, on DCN3+, degamma is split into two blocks: degamma ROM for
pre-defined TFs and `gamma correction` for user/custom curves and
degamma ROM settings doesn't apply to cursor plane. To get DRM legacy
gamma working as expected, enable cursor degamma ROM for implict sRGB
degamma on HW with this configuration.

Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2803
Fixes: 96b020e216 ("drm/amd/display: check attr flag before set cursor degamma on DCN3+")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-06 22:09:33 -04:00
Hamza Mahfooz
47428f4b63 drm/amd/display: limit the v_startup workaround to ASICs older than DCN3.1
Since, calling dcn20_adjust_freesync_v_startup() on DCN3.1+ ASICs
can cause the display to flicker and underflow to occur, we shouldn't
call it for them. So, ensure that the DCN version is less than
DCN_VERSION_3_1 before calling dcn20_adjust_freesync_v_startup().

Cc: stable@vger.kernel.org
Reviewed-by: Fangzhi Zuo <jerry.zuo@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-09-06 22:08:26 -04:00