__set_pte_at() handles 3 main cases with #ifdefs plus the 'percpu'
subcase which leads to code duplication.
Rewrite the function using IS_ENABLED() to minimise the total number
of cases and remove duplicated code.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/2322dd08217bccab25456fe8b189edf0e6a8b6dd.1692121353.git.christophe.leroy@csgroup.eu
A W=1 build of mpc885_ads_defconfig throws the following error:
CC arch/powerpc/platforms/8xx/m8xx_setup.o
arch/powerpc/platforms/8xx/m8xx_setup.c:41:1: error: no previous prototype for 'init_internal_rtc' [-Werror=missing-prototypes]
41 | init_internal_rtc(void)
| ^~~~~~~~~~~~~~~~~
init_internal_rtc() was introduced by commit df34403dca ("[POWERPC]
8xx: Add mpc885ads support and common mpc8xx files") as a weak
function but has never been defined and/or used outside m8xx_setup.c
As it is called only once there, just fold it into its caller and
remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/0aa1141e18a84d926e199093204b37ec993f0c87.1692275185.git.christophe.leroy@csgroup.eu
Replace printk(KERN_WARN with pr_warn(
Remove a couple of blank lines
Re-align multi-line code.
Replace asm/io.h by linux/io.h
mpc83xx.h doesn't need linux/device.h or asm/pci-bridge.h
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/2cb498f637e082a4af8032311fad3cae84d6aa5d.1692199324.git.christophe.leroy@csgroup.eu
I do not choose to continue as maintainer.
My final act as maintainer is to write down every thing that I've been
doing as maintainer for the past six years. There are too many demands
placed on the maintainer, and the only way to fix this is to delegate
the responsibilities. I also wrote down my impressions of the unwritten
rules about how to contribute to XFS.
The patchset concludes with my nomination for a new release manager to
keep things running in the interim. Testing and triage; community
management; and LTS maintenance are all open positions.
I'm /continuing/ as a senior developer and reviewer for XFS. I expect
to continue participating in interlock calls, LSFMM, etc.
v2: clarify release manager role, amend some factual errors, add some
acks and reviews.
v3: add more review tags.
With a bit of luck, this should all go splendidly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZNT+VAAKCRBKO3ySh0YR
pq7EAP98GSys/OxLNwCkxZjQ+2h9YUJ97O3oRo65tnnRax870gEAicVmJIfditmZ
+k0SiURcBogNadu0u18WiDXIoGdb4gc=
=MZhR
-----END PGP SIGNATURE-----
Merge tag 'maintainer-transition-6.6_2023-08-10' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.6-mergeA
xfs: maintainer transition for 6.6
I do not choose to continue as maintainer.
My final act as maintainer is to write down every thing that I've been
doing as maintainer for the past six years. There are too many demands
placed on the maintainer, and the only way to fix this is to delegate
the responsibilities. I also wrote down my impressions of the unwritten
rules about how to contribute to XFS.
The patchset concludes with my nomination for a new release manager to
keep things running in the interim. Testing and triage; community
management; and LTS maintenance are all open positions.
I'm /continuing/ as a senior developer and reviewer for XFS. I expect
to continue participating in interlock calls, LSFMM, etc.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandan.babu@oracle.com>
* tag 'maintainer-transition-6.6_2023-08-10' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
MAINTAINERS: add Chandan Babu as XFS release manager
MAINTAINERS: drop me as XFS maintainer
docs: add maintainer entry profile for XFS
No known outstanding regressions.
Fixes to fixes:
- virtio-net: set queues after driver_ok, avoid a potential race
added by recent fix
- Revert "vlan: Fix VLAN 0 memory leak", it may lead to a warning
when VLAN 0 is registered explicitly
- nf_tables:
- fix false-positive lockdep splat in recent fixes
- don't fail inserts if duplicate has expired (fix test failures)
- fix races between garbage collection and netns dismantle
Current release - new code bugs:
- mlx5: Fix mlx5_cmd_update_root_ft() error flow
Previous releases - regressions:
- phy: fix IRQ-based wake-on-lan over hibernate / power off
Previous releases - always broken:
- sock: fix misuse of sk_under_memory_pressure() preventing system
from exiting global TCP memory pressure if a single cgroup is under
pressure
- fix the RTO timer retransmitting skb every 1ms if linear option
is enabled
- af_key: fix sadb_x_filter validation, amment netlink policy
- ipsec: fix slab-use-after-free in decode_session6()
- macb: in ZynqMP resume always configure PS GTR for non-wakeup source
Misc:
- netfilter: set default timeout to 3 secs for sctp shutdown send and
recv state (from 300ms), align with protocol timers
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Ze13
-----END PGP SIGNATURE-----
Merge tag 'net-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from ipsec and netfilter.
No known outstanding regressions.
Fixes to fixes:
- virtio-net: set queues after driver_ok, avoid a potential race
added by recent fix
- Revert "vlan: Fix VLAN 0 memory leak", it may lead to a warning
when VLAN 0 is registered explicitly
- nf_tables:
- fix false-positive lockdep splat in recent fixes
- don't fail inserts if duplicate has expired (fix test failures)
- fix races between garbage collection and netns dismantle
Current release - new code bugs:
- mlx5: Fix mlx5_cmd_update_root_ft() error flow
Previous releases - regressions:
- phy: fix IRQ-based wake-on-lan over hibernate / power off
Previous releases - always broken:
- sock: fix misuse of sk_under_memory_pressure() preventing system
from exiting global TCP memory pressure if a single cgroup is under
pressure
- fix the RTO timer retransmitting skb every 1ms if linear option is
enabled
- af_key: fix sadb_x_filter validation, amment netlink policy
- ipsec: fix slab-use-after-free in decode_session6()
- macb: in ZynqMP resume always configure PS GTR for non-wakeup
source
Misc:
- netfilter: set default timeout to 3 secs for sctp shutdown send and
recv state (from 300ms), align with protocol timers"
* tag 'net-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
ice: Block switchdev mode when ADQ is active and vice versa
qede: fix firmware halt over suspend and resume
net: do not allow gso_size to be set to GSO_BY_FRAGS
sock: Fix misuse of sk_under_memory_pressure()
sfc: don't fail probe if MAE/TC setup fails
sfc: don't unregister flow_indr if it was never registered
net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset
net/mlx5: Fix mlx5_cmd_update_root_ft() error flow
net/mlx5e: XDP, Fix fifo overrun on XDP_REDIRECT
i40e: fix misleading debug logs
iavf: fix FDIR rule fields masks validation
ipv6: fix indentation of a config attribute
mailmap: add entries for Simon Horman
broadcom: b44: Use b44_writephy() return value
net: openvswitch: reject negative ifindex
team: Fix incorrect deletion of ETH_P_8021AD protocol vid from slaves
net: phy: broadcom: stub c45 read/write for 54810
netfilter: nft_dynset: disallow object maps
netfilter: nf_tables: GC transaction race with netns dismantle
netfilter: nf_tables: fix GC transaction races with netns and netlink event exit path
...
edid:
- revert mode parsing fix that had side effects.
i915:
- Fix the flow for ignoring GuC SLPC efficient frequency selection
- Fix SDVO panel_type initialization
- Fix display probe for IVB Q and IVB D GT2 server
nouveau:
- fix use-after-free in connector code
qaic:
- integer overflow check fix
- fix slicing memory leak
panel:
- fix JDI LT070ME05000 probing
- fix AUO G121EAN01 timings
amdgpu:
- SMU 13.x fixes
- Fix mcbp parameter for gfx9
- SMU 11.x fixes
- Temporary fix for large numbers of XCP partitions
- S0ix fixes
- DCN 2.0 fix
qxl:
- fix use after free race in dumb object allocation
-----BEGIN PGP SIGNATURE-----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=P1rE
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2023-08-18-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular enough week, mostly the usual amdgpu and i915 fixes. Also
qaic, nouveau, qxl and a revert for an EDID patch that had some side
effects, along with a couple of panel fixes.
edid:
- revert mode parsing fix that had side effects.
i915:
- Fix the flow for ignoring GuC SLPC efficient frequency selection
- Fix SDVO panel_type initialization
- Fix display probe for IVB Q and IVB D GT2 server
nouveau:
- fix use-after-free in connector code
qaic:
- integer overflow check fix
- fix slicing memory leak
panel:
- fix JDI LT070ME05000 probing
- fix AUO G121EAN01 timings
amdgpu:
- SMU 13.x fixes
- Fix mcbp parameter for gfx9
- SMU 11.x fixes
- Temporary fix for large numbers of XCP partitions
- S0ix fixes
- DCN 2.0 fix
qxl:
- fix use after free race in dumb object allocation"
* tag 'drm-fixes-2023-08-18-1' of git://anongit.freedesktop.org/drm/drm:
drm/qxl: fix UAF on handle creation
Revert "drm/edid: Fix csync detailed mode parsing"
drm/nouveau/disp: fix use-after-free in error handling of nouveau_connector_create
Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0""
drm/amd: flush any delayed gfxoff on suspend entry
drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix
drm/amdgpu: skip xcp drm device allocation when out of drm resource
drm/amd/pm: Update pci link width for smu v13.0.6
drm/amd/pm: Fix temperature unit of SMU v13.0.6
drm/amdgpu/pm: fix throttle_status for other than MP1 11.0.7
drm/amdgpu: disable mcbp if parameter zero is set
drm/amd/pm: disallow the fan setting if there is no fan on smu 13.0.0
accel/qaic: Clean up integer overflow checking in map_user_pages()
accel/qaic: Fix slicing memory leak
drm/i915: fix display probe for IVB Q and IVB D GT2 server
drm/i915/sdvo: fix panel_type initialization
drm/i915/guc/slpc: Restore efficient freq earlier
drm/panel: simple: Fix AUO G121EAN01 panel timings according to the docs
drm/panel: JDI LT070ME05000 simplify with dev_err_probe()
Currently for testing an output format with DSC, we just force the
output format, without checking if it can be supported.
This also creates an issue where there is a PCON which might need to
convert from forced output format to the format to sink format.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-19-ankit.k.nautiyal@intel.com
Currently, we take the max lane, rate and pipe bpp, to get the maximum
compressed bpp possible. We then set the output bpp to this value.
This patch provides support to have max bpp, min rate and min lanes,
that can support the min compressed bpp.
v2:
-Avoid ending up with compressed bpp, same as pipe bpp. (Stan)
-Fix the checks for limits->max/min_bpp while iterating over list of
valid DSC bpcs. (Stan)
v3:
-Refactor the code to have pipe bpp/compressed bpp computation and slice
count calculation separately for different cases.
v4:
-Separate the pipe_bpp calculation for eDP and DP.
v5:
-Get rid of magic numbers for max and min bpp,
and improve documentation. (Stan).
-Use functions for {src_sink}_{min_max}_compressed_bpp (Ville).
v6:
-Remove lines to set link config to max.
v7:
-Split the part to separate edp and dp functions for computing DSC BPP
into separate patch.
v8:
-Separate mechanism to get compressed bpp for ICL,TGL and XELPD+.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-17-ankit.k.nautiyal@intel.com
Currently we check if the pipe_bpp selected is >= the
min DSC bpc/bpp requirement. We do not check if it is <= the max DSC
bpc/bpp requirement.
Add checks for max DSC BPC/BPP constraints while computing the
pipe_bpp when DSC is in use.
v2: Fix the commit message.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-15-ankit.k.nautiyal@intel.com
Refactor code to separate functions for eDP and DP for computing
pipe_bpp/compressed bpp when DSC is involved.
This will help to optimize the link configuration for DP later.
v2: Fix checkpatch warning.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-14-ankit.k.nautiyal@intel.com
The helper intel_dp_dsc_compute_bpp gives the maximum
pipe bpp that is allowed with DSC.
Rename the this to reflect that it returns max pipe bpp supported
with DSC.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-13-ankit.k.nautiyal@intel.com
For DSC the min BPC is 8 for ICL+ and so the min pipe_bpp is 24.
Check this condition for cases where bpc is forced by debugfs flag
dsc_force_bpc. If the check fails, then WARN and ignore the debugfs
flag.
For MST case the pipe_bpp is already computed (hardcoded to be 24),
and this check is not required.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-11-ankit.k.nautiyal@intel.com
Separate out functions for getting maximum and minimum input BPC based
on platforms, when DSC is used.
v2: Use HAS_DSC macro instead of platform check while getting min input
bpc. (Stan)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-10-ankit.k.nautiyal@intel.com
For MST the bpc is hardcoded to 8, and pipe bpp to 24.
So avoid forcing DSC bpc for MST case.
v2: Warn and ignore the debug flag than to bail out. (Jani)
v3: Fix dbg message to mention forced bpc instead of bpp.
v4: Fix checkpatch longline warning.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-9-ankit.k.nautiyal@intel.com
As per Bsepc:49259, Bigjoiner BW check puts restriction on the
compressed bpp for a given CDCLK, pixelclock in cases where
Bigjoiner + DSC are used.
Currently compressed bpp is computed first, and it is ensured that
the bpp will work at least with the max CDCLK freq.
Since the CDCLK is computed later, lets account for Bigjoiner BW
check while calculating Min CDCLK.
v2: Use pixel clock in the bw calculations. (Ville)
v3: Use helper to account for FEC overhead. (Stan)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-7-ankit.k.nautiyal@intel.com
In Bigjoiner check for DSC, bigjoiner interface bits for DP for
DISPLAY > 13 is 36 (Bspec: 49259).
v2: Corrected Display ver to 13.
v3: Follow convention for conditional statement. (Ville)
v4: Fix check for display ver. (Ville)
v5: Added note for 2 PPC. (Stan)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-6-ankit.k.nautiyal@intel.com
Currently there are many places where we use output_bpp for link bpp and
compressed bpp.
Lets use consistent naming:
output_bpp : The intermediate value taking into account the
output_format chroma subsampling.
compressed_bpp : target bpp for the DSC encoder.
link_bpp : final bpp used in the link.
For 444 sampling without DSC:
link_bpp = output_bpp = pipe_bpp
For 420 sampling without DSC:
output_bpp = pipe_bpp / 2
link_bpp = output_bpp
For 444 sampling with DSC:
output_bpp = pipe_bpp
link_bpp = compressed_bpp, computed with output_bpp (i.e. pipe_bpp in
this case)
For 420 sampling with DSC:
output_bpp = pipe_bpp/2
link_bpp = compressed_bpp, computed with output_bpp
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-5-ankit.k.nautiyal@intel.com
The final link bpp used to calculate the m_n values depend on the
output_format. Though the output_format is set to RGB for MST case and
the link bpp will be same as the pipe bpp, for the sake of semantics,
lets calculate the m_n values with the link bpp, instead of pipe_bpp.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-4-ankit.k.nautiyal@intel.com
While using DSC the compressed bpp is computed assuming RGB output
format. Consider the output_format and compute the compressed bpp
during mode valid and compute config steps.
For DP-MST we currently use RGB output format only, so continue
using RGB while computing compressed bpp for MST case.
v2: Use output_bpp instead for pipe_bpp to clamp compressed_bpp. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230817142459.89764-2-ankit.k.nautiyal@intel.com
When a bio is split by md raid0, the newly created bio will not be tracked
by md for I/O accounting. Only the portion of I/O still assigned to the
original bio which was reduced by the split will be accounted for. This
results in md iostat data sometimes showing I/O values far below the actual
amount of data being sent through md.
md_account_bio() needs to be called for all bio generated by the bio split.
A simple example of the issue was generated using a raid0 device on partitions
to the same device. Since all raid0 I/O then goes to one device, it makes it
easy to see a gap between the md device and its sd storage. Reading an lvm
device on top of the md device, the iostat output (some 0 columns and extra
devices removed to make the data more compact) was:
Device tps kB_read/s kB_wrtn/s kB_dscd/s kB_read
md2 0.00 0.00 0.00 0.00 0
sde 0.00 0.00 0.00 0.00 0
md2 1364.00 411496.00 0.00 0.00 411496
sde 1734.00 646144.00 0.00 0.00 646144
md2 1699.00 510680.00 0.00 0.00 510680
sde 2155.00 802784.00 0.00 0.00 802784
md2 803.00 241480.00 0.00 0.00 241480
sde 1016.00 377888.00 0.00 0.00 377888
md2 0.00 0.00 0.00 0.00 0
sde 0.00 0.00 0.00 0.00 0
I/O was generated doing large direct I/O reads (12M) with dd to a linear
lvm volume on top of the 4 leg raid0 device.
The md2 reads were showing as roughly 2/3 of the reads to the sde device
containing all of md2's raid partitions. The sum of reads to sde was
1826816 kB, which was the expected amount as it was the amount read by
dd. With the patch, the total reads from md will match the reads from
sde and be consistent with the amount of I/O generated.
Fixes: 10764815ff ("md: add io accounting for raid0 and raid5")
Signed-off-by: David Jeffery <djeffery@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230816181433.13289-1-djeffery@redhat.com
Commit f00d7c85be ("md/raid0: fix up bio splitting.") among other
things changed how bio that needs to be split is submitted. Before this
commit, we have split the bio, mapped and submitted each part. After
this commit, we map only the first part of the split bio and submit the
second part unmapped. Due to bio sorting in __submit_bio_noacct() this
results in the following request ordering:
9,0 18 1181 0.525037895 15995 Q WS 1479315464 + 63392
Split off chunk-sized (1024 sectors) request:
9,0 18 1182 0.629019647 15995 X WS 1479315464 / 1479316488
Request is unaligned to the chunk so it's split in
raid0_make_request(). This is the first part mapped and punted to
bio_list:
8,0 18 7053 0.629020455 15995 A WS 739921928 + 1016 <- (9,0) 1479315464
Now raid0_make_request() returns, second part is postponed on
bio_list. __submit_bio_noacct() resorts the bio_list, mapped request
is submitted to the underlying device:
8,0 18 7054 0.629022782 15995 G WS 739921928 + 1016
Now we take another request from the bio_list which is the remainder
of the original huge request. Split off another chunk-sized bit from
it and the situation repeats:
9,0 18 1183 0.629024499 15995 X WS 1479316488 / 1479317512
8,16 18 6998 0.629025110 15995 A WS 739921928 + 1016 <- (9,0) 1479316488
8,16 18 6999 0.629026728 15995 G WS 739921928 + 1016
...
9,0 18 1184 0.629032940 15995 X WS 1479317512 / 1479318536 [libnetacq-write]
8,0 18 7059 0.629033294 15995 A WS 739922952 + 1016 <- (9,0) 1479317512
8,0 18 7060 0.629033902 15995 G WS 739922952 + 1016
...
This repeats until we consume the whole original huge request. Now we
finally get to processing the second parts of the split off requests
(in reverse order):
8,16 18 7181 0.629161384 15995 A WS 739952640 + 8 <- (9,0) 1479377920
8,0 18 7239 0.629162140 15995 A WS 739952640 + 8 <- (9,0) 1479376896
8,16 18 7186 0.629163881 15995 A WS 739951616 + 8 <- (9,0) 1479375872
8,0 18 7242 0.629164421 15995 A WS 739951616 + 8 <- (9,0) 1479374848
...
I guess it is obvious that this IO pattern is extremely inefficient way
to perform sequential IO. It also makes bio_list to grow to rather long
lengths.
Change raid0_make_request() to map both parts of the split bio. Since we
know we are provided with at most chunk-sized bios, we will always need
to split the incoming bio at most once.
Fixes: f00d7c85be ("md/raid0: fix up bio splitting.")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230814092720.3931-2-jack@suse.cz
Signed-off-by: Song Liu <song@kernel.org>
Factor out helper function for mapping and submitting a bio out of
raid0_make_request(). We will use it later for submitting both parts of
a split bio.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230814092720.3931-1-jack@suse.cz
Signed-off-by: Song Liu <song@kernel.org>
handle_read_error() will call allow_barrier() to match the former barrier
raising. However, it should put the allow_barrier() at the end to avoid a
concurrent raid reshape.
Fixes: 689389a06c ("md/raid1: simplify handle_read_error().")
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xueshi Hu <xueshi.hu@smartx.com>
Link: https://lore.kernel.org/r/20230814135356.1113639-4-xueshi.hu@smartx.com
Signed-off-by: Song Liu <song@kernel.org>
Raid1 reshape will change mempool and r1conf::raid_disks which are
needed to free r1bio. allow_barrier() make a concurrent raid1_reshape()
possible. So, free the in-flight r1bio before waiting blocked rdev.
Fixes: 6bfe0b4990 ("md: support blocking writes to an array on device failure")
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xueshi Hu <xueshi.hu@smartx.com>
Link: https://lore.kernel.org/r/20230814135356.1113639-3-xueshi.hu@smartx.com
Signed-off-by: Song Liu <song@kernel.org>
After allow_barrier, a concurrent raid1_reshape() will replace old mempool
and r1conf::raid_disks. Move allow_barrier() to the end of raid_end_bio_io(),
so that r1bio can be freed safely.
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xueshi Hu <xueshi.hu@smartx.com>
Link: https://lore.kernel.org/r/20230814135356.1113639-2-xueshi.hu@smartx.com
Signed-off-by: Song Liu <song@kernel.org>
task's arch specific bits are carried in 2 places
- embedded thread_struct in task_struct
- associated thread_info (hoisted in task's stack page) and
syntactically: (thread_info *)(task_struct->stack)
ksp (dynamic kernel stack top) currently lives in thread_struct but
given its deep location in task struct likely to cache miss when
accessed from __switch_to(). Moving it to thread_info would be more
efficient given proximity to frequently accessed items such as
preempt_count thus very likely to be in cache, specially in schedular
code.
Note however that currently tsk.thread.ksp takes 1 memory access (off
of tsk pointer) while new code tsk->stack.ksp would take 2, but likely
to be in cache. Moreover if task is current the 2nd reference can be
elided and instead derived from SP as (SP & ~(THREAD_SIZE - 1))
All of this also makes __switch_to() code simpler and we can see the 2
ways of retirving ksp (descrobed above) in new code.
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
__switch_to() is final step of context switch, swapping kernel modes
stack (and callee regs) of outgoing task with next task.
It is also the starting point of stack unwinging of a sleeping task and
captures SP, FP, BLINK and the corresponding dwarf info. Back when
dinosaurs still roamed around, ARC gas didn't support CFI pseudo ops and
gcc was responsible for generating dwarf info. Thus it had to be written
in "C" with inline asm to do the hand crafting of stack. The function
prologue (and crucial saving of blink etc) was still gcc generated but
not visible in code. Likewise dwarf info was missing.
Now with modern tools, we can make things more obvious by writing the
code in asm and adding approproate dwarf cfi pseudo ops.
This is mostly non functional change, except for slight chnages to asm
- ARCompact doesn't support MOV_S fp, sp, so we use MOV
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
There are 2 pointers to kernel mode stack of a task
- task_struct.stack: base address of stack page (max possible stack top)
- thread_info.ksp : runtime stack top in __switch_to
INIT_THREAD was setting up ksp to stack base which was not really needed
- it would get overwritten with dynamic value on first call to
__switch_to when init is switched out for the very first time.
- generic code already does
init_task.stack = init_stack
and ARC code uses that to retrieve task's stack base.
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
The motivation is eventual ABI considerations for ARCv3 but even without
it this change us worthwhile as diffstat reduces 100 net lines
r25 is a callee saved register, normally not saved by entry code in
pt_regs. However because of its usage in CONFIG_ARC_CURR_IN_REG it needs
to be. This in turn requires a whole bunch of special casing when we
need to access r25. Then there is distinction between user mode r25 vs.
kernel mode r25 - hence distinct SAVE_CALLEE_SAVED_{USER,KERNEL}
Instead use gp which is a scratch register and thus saved already in entry
code. This cleans things up significantly and much nocer on eyes:
- SAVE_CALLEE_SAVED_{USER,KERNEL} are now exactly same
- no special user_r25 slot in pt_reggs
Note that typical global asm registers are callee-saved (r25), but gp is
not callee-saved thus needs additional -ffixed-<reg> toggle
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
- boot log now clearly per ISA
- global struct cpuinfo_arc[] elimiated
- local struct struct arcinfo kept for passing info
between functions
Tested-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308162101.Ve5jBg80-lkp@intel.com
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
This is first step in eliminating struct cpuinfo_arc[NR_CPUS]
Back when we had just ARCompact ISA, the idea was to read/bit-fiddle
the BCRs once and and cache decoded information in a global struct ready
to use.
With ARCv2 it was modified to contained abstract / ISA agnostic
information.
However with ARCv3 there 's too much disparity to abstract in common
structures. So drop the entire decode once and store paradigm. Afterall
there's only 2 users of this machinery anyways: boot printing and
cat /proc/cpuinfo. None is performance critical to warrant locking away
resident memory per cpu.
This patch is first step in that direction
- decouples struct cpuinfo_arc_mmu from global struct cpuinfo_arc
- mmu code still has a trimmed down static version of
struct cpuinfo_arc_mmu to cache information needed in performance
critical code such as tlb flush routines
- folds read_decode_mmu_bcr() into arc_mmu_mumbojumbo()
- setup_processor() directly calls arc_mmu_init() and not via
arc_cpu_init()
Tested-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308151213.qKZPMiyz-lkp@intel.com/
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
On all supported SoCs to date, the PCNoC (a.k.a CNoC_PERIPH) clock must
be always-on as long as the APSS is online and only has to run
at 19.2 MHz. Define it to be as such in the ACTIVE domain.
Some SoCs use that clock for bus scaling, while others just need it for
reaching the hardware. This commit will hurt neither.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230731-topic-pcnoc-v1-2-452dd36d11d7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some clocks, at least PCNoC (a.k.a CNoC_PERIPH) need to be always on,
at least on the ACTIVE side, regardless of whether they're used for bus
scaling or not.
Introduce a new macro to preset non-INT_MAX rates and clk flags to make
it easy and work implicitly through the CCF.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230731-topic-pcnoc-v1-1-452dd36d11d7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>