Use the dGPU path instead. There were a lot of platform
issues with IOMMU in general on these chips due to windows
not enabling IOMMU at the time. The dGPU path has been
used for a long time with newer APUs and works fine. This
also paves the way to simplify the driver significantly.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the dGPU path instead. There were a lot of platform
issues with IOMMU in general on these chips due to windows
not enabling IOMMU at the time. The dGPU path has been
used for a long time with newer APUs and works fine. This
also paves the way to simplify the driver significantly.
v2: use the dGPU queue manager functions
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are dropping the IOMMUv2 path, so no need to enable this.
It's often buggy on consumer platforms anyway.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
HCI_MAX_AD_LENGTH shall only be used if the controller doesn't support
extended advertising, otherwise HCI_MAX_EXT_AD_LENGTH shall be used
instead.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The hci_add_adv_monitor() hci_remove_adv_monitor() functions call
bt_dev_dbg() to print some debug statements. The bt_dev_dbg() macro
automatically adds in the device's name. That means that we shouldn't
include the name in the bt_dev_dbg() calls.
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some use cases require the user to be informed if BIG synchronization
fails. This commit makes it so that even if the BIG sync established
event arrives with error status, a new hconn is added for each BIS,
and the iso layer is notified about the failed connections.
Unsuccesful bis connections will be marked using the
HCI_CONN_BIG_SYNC_FAILED flag. From the iso layer, the POLLERR event
is triggered on the newly allocated bis sockets, before adding them
to the accept list of the parent socket.
From user space, a new fd for each failed bis connection will be
obtained by calling accept. The user should check for the POLLERR
event on the new socket, to determine if the connection was successful
or not.
The HCI_CONN_BIG_SYNC flag has been added to mark whether the BIG sync
has been successfully established. This flag is checked at bis cleanup,
so the HCI LE BIG Terminate Sync command is only issued if needed.
The BT_SK_BIG_SYNC flag indicates if BIG create sync has been called
for a listening socket, to avoid issuing the command everytime a BIGInfo
advertising report is received.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This attempts to always allocate a unique handle for connections so they
can be properly aborted by the likes of hci_abort_conn, so this uses the
invalid range as a pool of unset handles that way if userspace is trying
to create multiple connections at once each will be given a unique
handle which will be considered unset.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
ISO_LINK connections where not being handled properly on
hci_abort_conn_sync which sometimes resulted in sending the wrong
commands, or in case of having the reject command being sent by the
socket code (iso.c) which is sort of a layer violation.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This consolidates code for aborting connections using
hci_cmd_sync_queue so it is synchronized with other threads, but
because of the fact that some commands may block the cmd_sync_queue
while waiting specific events this attempt to cancel those requests by
using hci_cmd_sync_cancel.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch implement function .coredump() and dmp_hdr() in btusb
driver for MediaTek controller. FW core dump was triggered by FW
specific event to show something unexpected happened in the controller.
The driver would be responsible for collecting and uploading the device
core dump pieces in hci driver using core dump API. Once we finished
the whole process, the driver would reset the controller to recover the
kind of fatal error.
Co-developed-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Jing Cai <jing.cai@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Introduce btmtk_reset_work which can be called whenever the firmware abort,
HCI command timeout, other fatal error happen.
Co-developed-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Jing Cai <jing.cai@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use readx_poll_timeout instead of open coding to poll the hardware reset
status until it is done.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add printing firmware information part when driver loading firmware that
user can get mediatek bluetooth information.
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add hardware variant(0x1c) for Gale Peak core (CNVi).
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In the case of a Synchronized Receiver capable device, enable at start-up the
events for PA reports, PA Sync Established and Big Info Adv reports.
Signed-off-by: Claudia Draghicescu <claudia.rosu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
New Intel platforms supports reset of Bluetooth device via ACPI DSM
methods. The legacy reset mechanism via GPIO will be deprecated in
future. This patch checks the platform support for reset methods and if
supported uses the same instead of legacy GPIO toggling method.
ACPI firmware supports two types of reset method based on NIC card.
(Discrete or Integrated).
1. VSEC Type - Vendor Specific Extended Capability. Here BT_EN and
BT_IF_SELECT lines are driven by a register in PCH cluster. This
interface is supported on discrete BT solution.
2. WDISABLE2 - In this soluton, W_DISABLE2 pin in M.2 is connected to
physical GPIO from PCH. The DSM interface shall toggle this to recover
from error.
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Intercept debug exception events from QCA controller and put them into
a devcoredump using hci devcoredump APIs of hci_core
Signed-off-by: Sai Teja Aluvala <quic_saluvala@quicinc.com>
V2 -> V3:
---------
changed hci_coredump_qca function
V1 -> V2:
---------
Updated to work with the updated HCI devcoredump API.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch implements the hci_qca driver side .coredump() callback to
trigger a devcoredump via sysfs.
Signed-off-by: Sai Teja Aluvala <quic_saluvala@quicinc.com>
v2 -> V3:
--------
Updated commit text
v1 -> V2:
--------
Updated to work with the updated HCI devcoredump API.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support for creating multiple BIGs. According to
spec, each BIG shall have an unique handle, and each BIG should
be associated with a different advertising handle. Otherwise,
the LE Create BIG command will fail, with error code
Command Disallowed (for reusing a BIG handle), or
Unknown Advertising Identifier (for reusing an advertising
handle).
The btmon snippet below shows an exercise for creating two BIGs
for the same controller, by opening two isotest instances with
the following command:
tools/isotest -i hci0 -s 00:00:00:00:00:00
< HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31
Handle: 0x00
Advertising Handle: 0x01
Number of BIS: 1
SDU Interval: 10000 us (0x002710)
Maximum SDU size: 40
Maximum Latency: 10 ms (0x000a)
RTN: 0x02
PHY: LE 2M (0x02)
Packing: Sequential (0x00)
Framing: Unframed (0x00)
Encryption: 0x00
Broadcast Code: 00000000000000000000000000000000
> HCI Event: Command Status (0x0f) plen 4
LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 21
LE Broadcast Isochronous Group Complete (0x1b)
Status: Success (0x00)
Handle: 0x00
BIG Synchronization Delay: 912 us (0x000390)
Transport Latency: 912 us (0x000390)
PHY: LE 2M (0x02)
NSE: 3
BN: 1
PTO: 1
IRC: 3
Maximum PDU: 40
ISO Interval: 10.00 msec (0x0008)
Connection Handle #0: 10
< HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068)
Handle: 0x01
Advertising Handle: 0x02
Number of BIS: 1
SDU Interval: 10000 us (0x002710)
Maximum SDU size: 40
Maximum Latency: 10 ms (0x000a)
RTN: 0x02
PHY: LE 2M (0x02)
Packing: Sequential (0x00)
Framing: Unframed (0x00)
Encryption: 0x00
Broadcast Code: 00000000000000000000000000000000
> HCI Event: Command Status (0x0f) plen 4
LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1
Status: Success (0x00)
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This stores scm_creds into hci_skb_cb so they can be properly forwarded
to the likes of btmon which is then able to print information about the
process who is originating the traffic:
bluetoothd[35]: @ MGMT Command: Rea.. (0x0001) plen 0 {0x0001}
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001}
Read Management Version Information (0x0001) plen 3
bluetoothd[35]: < ACL Data T.. flags 0x00 dlen 41
ATT: Write Command (0x52) len 36
Handle: 0x0043 Type: ASE Control Point (0x2bc6)
Data: 020203000110270000022800020a00409c0001000110270000022800020a00409c00
Opcode: QoS Configuration (0x02)
Number of ASE(s): 2
ASE: #0
ASE ID: 0x03
CIG ID: 0x00
CIS ID: 0x01
SDU Interval: 10000 usec
Framing: Unframed (0x00)
PHY: 0x02
LE 2M PHY (0x02)
Max SDU: 40
RTN: 2
Max Transport Latency: 10
Presentation Delay: 40000 us
ASE: #1
ASE ID: 0x01
CIG ID: 0x00
CIS ID: 0x01
SDU Interval: 10000 usec
Framing: Unframed (0x00)
PHY: 0x02
LE 2M PHY (0x02)
Max SDU: 40
RTN: 2
Max Transport Latency: 10
Presentation Delay: 40000 us
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure peer information is always available via sock when using
bt_sock_alloc.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This consolidates code around sk_alloc into bt_sock_alloc which does
take care of common initialization.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The original code did not determine the length value of the HCI command
for drop fw even there's no parameter needed. In this commit, use struct
hci_command_hdr to manage opcode and length. It would be more regular and
more readable.
Suggested-by: Alex Lu <alex_lu@realsil.com.cn>
Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In
6524c798b7 ("driver core: cpu: Make cpu_show_not_affected() static")
I fat-fingered the name of cpu_show_gds(). Usually, I'd rebase but since
those are extraordinary embargoed times, the commit above was already
pulled into another tree so no no.
Therefore, fix it ontop.
Fixes: 6524c798b7 ("driver core: cpu: Make cpu_show_not_affected() static")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230811095831.27513-1-bp@alien8.de
LE Create CIS command shall not be sent before all CIS Established
events from its previous invocation have been processed. Currently it is
sent via hci_sync but that only waits for the first event, but there can
be multiple.
Make it wait for all events, and simplify the CIS creation as follows:
Add new flag HCI_CONN_CREATE_CIS, which is set if Create CIS has been
sent for the connection but it is not yet completed.
Make BT_CONNECT state to mean the connection wants Create CIS.
On events after which new Create CIS may need to be sent, send it if
possible and some connections need it. These events are:
hci_connect_cis, iso_connect_cfm, hci_cs_le_create_cis,
hci_le_cis_estabilished_evt.
The Create CIS status/completion events shall queue new Create CIS only
if at least one of the connections transitions away from BT_CONNECT, so
that we don't loop if controller is sending bogus events.
This fixes sending multiple CIS Create for the same CIS in the
"ISO AC 6(i) - Success" BlueZ test case:
< HCI Command: LE Create Co.. (0x08|0x0064) plen 9 #129 [hci0]
Number of CIS: 2
CIS Handle: 257
ACL Handle: 42
CIS Handle: 258
ACL Handle: 42
> HCI Event: Command Status (0x0f) plen 4 #130 [hci0]
LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 29 #131 [hci0]
LE Connected Isochronous Stream Established (0x19)
Status: Success (0x00)
Connection Handle: 257
...
< HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 #132 [hci0]
...
> HCI Event: Command Complete (0x0e) plen 6 #133 [hci0]
LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1
...
< HCI Command: LE Create Co.. (0x08|0x0064) plen 5 #134 [hci0]
Number of CIS: 1
CIS Handle: 258
ACL Handle: 42
> HCI Event: Command Status (0x0f) plen 4 #135 [hci0]
LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1
Status: ACL Connection Already Exists (0x0b)
> HCI Event: LE Meta Event (0x3e) plen 29 #136 [hci0]
LE Connected Isochronous Stream Established (0x19)
Status: Success (0x00)
Connection Handle: 258
...
Fixes: c09b80be6f ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is required for some configurations to have multiple BISes as part
of the same BIG.
Similar to the flow implemented for unicast, DEFER_SETUP will also be
used to bind multiple BISes for the same BIG, before starting Periodic
Advertising and creating the BIG.
The user will have to open a new socket for each BIS. By setting the
BT_DEFER_SETUP socket option and calling connect, a new connection
will be added for the BIG and advertising handle set by the socket
QoS parameters. Since all BISes will be bound for the same BIG and
advertising handle, the socket QoS options and base parameters should
match for all connections.
By calling connect on a socket that does not have the BT_DEFER_SETUP
option set, periodic advertising will be started and the BIG will
be created, with a BIS for each previously bound connection. Since
a BIG cannot be reconfigured with additional BISes after creation,
no more connections can be bound for the BIG after the start periodic
advertising and create BIG commands have been queued.
The bis_cleanup function has also been updated, so that the advertising
set and the BIG will not be terminated unless there are no more
bound or connected BISes.
The HCI_CONN_BIG_CREATED connection flag has been added to indicate
that the BIG has been successfully created. This flag is checked at
bis_cleanup, so that the BIG is only terminated if the
HCI_LE_Create_BIG_Complete has been received.
This implementation has been tested on hardware, using the "isotest"
tool with an additional command line option, to specify the number of
BISes to create as part of the desired BIG:
tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1
The btmon log shows that a BIG containing 2 BISes has been created:
< HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31
Handle: 0x01
Advertising Handle: 0x01
Number of BIS: 2
SDU Interval: 10000 us (0x002710)
Maximum SDU size: 40
Maximum Latency: 10 ms (0x000a)
RTN: 0x02
PHY: LE 2M (0x02)
Packing: Sequential (0x00)
Framing: Unframed (0x00)
Encryption: 0x00
Broadcast Code: 00000000000000000000000000000000
> HCI Event: Command Status (0x0f) plen 4
LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 23
LE Broadcast Isochronous Group Complete (0x1b)
Status: Success (0x00)
Handle: 0x01
BIG Synchronization Delay: 1974 us (0x0007b6)
Transport Latency: 1974 us (0x0007b6)
PHY: LE 2M (0x02)
NSE: 3
BN: 1
PTO: 1
IRC: 3
Maximum PDU: 40
ISO Interval: 10.00 msec (0x0008)
Connection Handle #0: 10
Connection Handle #1: 11
< HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13
Handle: 10
Data Path Direction: Input (Host to Controller) (0x00)
Data Path: HCI (0x00)
Coding Format: Transparent (0x03)
Company Codec ID: Ericsson Technology Licensing (0)
Vendor Codec ID: 0
Controller Delay: 0 us (0x000000)
Codec Configuration Length: 0
Codec Configuration:
> HCI Event: Command Complete (0x0e) plen 6
LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1
Status: Success (0x00)
Handle: 10
< HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13
Handle: 11
Data Path Direction: Input (Host to Controller) (0x00)
Data Path: HCI (0x00)
Coding Format: Transparent (0x03)
Company Codec ID: Ericsson Technology Licensing (0)
Vendor Codec ID: 0
Controller Delay: 0 us (0x000000)
Codec Configuration Length: 0
Codec Configuration:
> HCI Event: Command Complete (0x0e) plen 6
LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1
Status: Success (0x00)
Handle: 11
< ISO Data TX: Handle 10 flags 0x02 dlen 44
< ISO Data TX: Handle 11 flags 0x02 dlen 44
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 10
Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 11
Count: 1
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Catch debug exception from controller and driver, and trigger a
devcoredump using hci devcoredump APIs. The debug exception data
will be parsed in userspace.
Signed-off-by: Alex Lu <alex_lu@realsil.com.cn>
Signed-off-by: Hilda Wu <hildawu@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch checks for ISO_BROADCASTER and ISO_SYNC_RECEIVER in
controller.
Signed-off-by: Claudia Draghicescu <claudia.rosu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix missing symbol seen in:
```
19: 'import perf' in python :
--- start ---
test child forked, pid 2640936
python usage test: "echo "import sys ; sys.path.insert(0, 'python'); import perf" | '/usr/bin/python3' "
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: tools/perf/python/perf.cpython-311-x86_64-linux-gnu.so: undefined symbol: perf_pmus__supports_extended_type
test child finished with -1
---- end ----
'import perf' in python: FAILED!
```
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20230810180944.2794188-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge a cpufreq fix for 6.5-rc6.
This makes amd-pstate use device_attributes as expected by the CPU root
kobject.
* pm-cpufreq:
cpufreq: amd-pstate: fix global sysfs attribute type
Add initial device tree support for the Qualcomm IPQ5018 SoC and
rdp432-c2 board.
Few things like 'reboot' does not work because, couple of more 'SCM'
APIS are needed to clear some TrustZone settings. Those will be
posted separately.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Co-developed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Co-developed-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Link: https://lore.kernel.org/r/1690533192-22220-6-git-send-email-quic_srichara@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This patch adds support for the global clock controller found on
the IPQ5018 based devices.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Co-developed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Link: https://lore.kernel.org/r/1690533192-22220-2-git-send-email-quic_srichara@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the second MAC on sa8775p-ride.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230810080909.6259-10-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Once we add a second ethernet node, the MDIO bus names will conflict
unless we provide aliases. Add one for the existing ethernet node.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230810080909.6259-9-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
For improved readability order the aliases alphabetically for
sa8775p-ride.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230810080909.6259-8-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a second SGMII PHY that will be used by EMAC1 on sa8775p-ride.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230810080909.6259-7-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
We'll be adding a second SGMII PHY on the same MDIO bus, so let's index
the first one for better readability.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230810080909.6259-6-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Device-tree bindings for MDIO define per-PHY reset-gpios as well as a
global reset-gpios property at the MDIO node level which controls all
devices on the bus. The latter is most likely a workaround for the
chicken-and-egg problem where we cannot read the ID of the PHY before
bringing it out of reset but we cannot bring it out of reset until we've
read its ID.
I have proposed a comprehensive solution for this problem in 2020 but it
never got upstream. We do however have workaround in place which allows
us to hard-code the PHY id in the compatible property, thus skipping the
ID scanning.
Let's make the device-tree for sa8775p-ride slightly more correct by
moving the reset-gpios property to the PHY node with its ID put into the
PHY node's compatible.
Link: https://lore.kernel.org/all/20200622093744.13685-1-brgl@bgdev.pl/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230810080909.6259-5-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the second SerDes PHY on sa8775p-ride development board.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230810080909.6259-4-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>