Commit graph

1,233,462 commits

Author SHA1 Message Date
Uwe Kleine-König
3feec4ef9f crypto: stm32 - Drop if block with always false condition
stm32_hash_remove() is only called after stm32_hash_probe() succeeded. In
this case platform_set_drvdata() was called with a non-NULL data patameter.

The check for hdev being non-NULL can be dropped because hdev is never NULL
(or something bad like memory corruption happened and then the check
doesn't help any more either).

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-08-11 19:19:27 +08:00
Uwe Kleine-König
aec4880516 crypto: stm32 - Properly handle pm_runtime_get failing
If pm_runtime_get() (disguised as pm_runtime_resume_and_get()) fails, this
means the clk wasn't prepared and enabled. Returning early in this case
however is wrong as then the following resource frees are skipped and this
is never catched up. So do all the cleanups but clk_disable_unprepare().

Also don't emit a warning, as stm32_hash_runtime_resume() already emitted
one.

Note that the return value of stm32_hash_remove() is mostly ignored by
the device core. The only effect of returning zero instead of an error
value is to suppress another warning in platform_remove(). So return 0
even if pm_runtime_resume_and_get() failed.

Fixes: 8b4d566de6 ("crypto: stm32/hash - Add power management support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-08-11 19:19:27 +08:00
Yang Yingliang
33b53749aa crypto: starfive - fix return value check in starfive_aes_prepare_req()
kzalloc() returns NULL pointer not PTR_ERR() when it fails,
so replace the IS_ERR() check with NULL pointer check.

Fixes: e22471c233 ("crypto: starfive - Add AES skcipher and aead support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-08-11 19:19:27 +08:00
Christoph Hellwig
8ffa54e337 xfs use fs_holder_ops for the log and RT devices
Use the generic fs_holder_ops to shut down the file system when the
log or RT device goes away instead of duplicating the logic.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Message-Id: <20230802154131.2221419-13-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-11 13:15:04 +02:00
Christoph Hellwig
8d945b595e xfs: drop s_umount over opening the log and RT devices
Just like get_tree_bdev needs to drop s_umount when opening the main
device, we need to do the same for the xfs log and RT devices to avoid a
potential lock order reversal with s_unmount for the mark_dead path.

It might be preferable to just drop s_umount over ->fill_super entirely,
but that will require a fairly massive audit first, so we'll do the easy
version here first.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Message-Id: <20230802154131.2221419-12-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-11 13:15:04 +02:00
Christoph Hellwig
8bed178375 ext4: use fs_holder_ops for the log device
Use the generic fs_holder_ops to shut down the file system when the
log device goes away instead of duplicating the logic.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230802154131.2221419-11-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-11 13:15:04 +02:00
Christoph Hellwig
6f5fc7de98 ext4: drop s_umount over opening the log device
Just like get_tree_bdev needs to drop s_umount when opening the main
device, we need to do the same for the ext4 log device to avoid a
potential lock order reversal with s_unmount for the mark_dead path.

It might be preferable to just drop s_umount over ->fill_super entirely,
but that will require a fairly massive audit first, so we'll do the easy
version here first.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230802154131.2221419-10-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-11 13:15:04 +02:00
Christoph Hellwig
7ecd0b6f51 fs: export fs_holder_ops
Export fs_holder_ops so that file systems that open additional block
devices can use it as well.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230802154131.2221419-9-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-11 13:15:03 +02:00
Christoph Hellwig
9c09a7cf62 fs: stop using get_super in fs_mark_dead
fs_mark_dead currently uses get_super to find the superblock for the
block device that is going away.  This means it is limited to the
main device stored in sb->s_dev, leading to a lot of code duplication
for file systems that can use multiple block devices.

Now that the holder for all block devices used by file systems is set
to the super_block, we can instead look at that holder and then check
if the file system is born and active, so do that instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230802154131.2221419-8-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-11 13:15:03 +02:00
Christoph Hellwig
2ea6f68932 fs: use the super_block as holder when mounting file systems
The file system type is not a very useful holder as it doesn't allow us
to go back to the actual file system instance.  Pass the super_block instead
which is useful when passed back to the file system driver.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230802154131.2221419-7-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-11 13:15:03 +02:00
David S. Miller
80f9ad0460 Merge branch 'rzn1-a5psw-vlan-port_bridge_flags'
Alexis Lothoré says:

====================
net: dsa: rzn1-a5psw: add support for vlan and .port_bridge_flags

this series enables vlan support in Renesas RZN1 internal ethernet switch,
and is a follow up to the work initiated by Clement Leger a few months ago,
who handed me over the topic.
This new revision aims to iron the last few points raised by Vladimir to
ensure that the driver is in line with switch drivers expectations, and is
based on the lengthy discussion in [1] (thanks Vladimir for the valuable
explanations)

[1] https://lore.kernel.org/netdev/20230314163651.242259-1-clement.leger@bootlin.com/

----
V5:
 - ensure that flooding can be enabled only if port belongs to a bridge
 - enable learning in a5psw_port_stp_state_set() only if port has learning
   enabled
 - toggle vlan tagging on vlan filtering in
 - removed reviewed-by on second patch since its modified

RESEND V4:
 - Resent due to net-next being closed

V4:
 - Fix missing CPU port bit in a5psw->bridged_ports
 - Use unsigned int for vlan_res_id parameters
 - Rename a5psw_get_vlan_res_entry() to a5psw_new_vlan_res_entry()
 - In a5psw_port_vlan_add(), return -ENOSPC when no VLAN entry is found
 - In a5psw_port_vlan_filtering(), compute "val" from "mask"

V3:
 - Target net-next tree and correct version...

V2:
 - Fixed a few formatting errors
 - Add .port_bridge_flags implementation
====================

Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-11 11:58:36 +01:00
Clément Léger
7b3f77c428 net: dsa: rzn1-a5psw: add vlan support
Add support for vlan operation (add, del, filtering) on the RZN1
driver. The a5psw switch supports up to 32 VLAN IDs with filtering,
tagged/untagged VLANs and PVID for each ports.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-11 11:58:36 +01:00
Clément Léger
0d37f83983 net: dsa: rzn1-a5psw: add support for .port_bridge_flags
When running vlan test (bridge_vlan_aware/unaware.sh), there were some
failure due to the lack .port_bridge_flag function to disable port
flooding. Implement this operation for BR_LEARNING, BR_FLOOD,
BR_MCAST_FLOOD and BR_BCAST_FLOOD.

Since .port_bridge_flags affects the bits disabling learning for a port,
ensure that any other modification on the same register done by
a5psw_port_stp_state_set is in sync by using the port learning state to
enable/disable learning on the port.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-11 11:58:36 +01:00
Clément Léger
6cf30fdd7b net: dsa: rzn1-a5psw: use a5psw_reg_rmw() to modify flooding resolution
.port_bridge_flags will be added and allows to modify the flood mask
independently for each port. Keeping the existing bridged_ports write
in a5psw_flooding_set_resolution() would potentially messed up this.
Use a read-modify-write to set that value and move bridged_ports
handling in bridge_port_join/leave.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-11 11:58:36 +01:00
Hariprasad Kelam
61f98da469 octeontx2-pf: Allow both ntuple and TC features on the interface
The current implementation does not allow the user to enable both
hw-tc-offload and ntuple features on the interface. These checks
are added as TC flower offload and ntuple features internally configures
the same hardware resource MCAM. But TC HTB offload configures the
transmit scheduler which can be safely enabled on the interface with
ntuple feature.

This patch adds the same and ensures only TC flower offload and ntuple
features are mutually exclusive.

Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-11 11:54:41 +01:00
Victor Shih
13433b9e27 mmc: core: Cleanup mmc_sd_num_wr_blocks() function
Use mmc_app_cmd() to avoid open-coding in mmc_sd_num_wr_blocks().

Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Link: https://lore.kernel.org/r/20230811101404.4463-1-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-08-11 12:31:55 +02:00
Chevron Li
da2a69cf27 mmc: sdhci-pci-o2micro: add Bayhub new chip GG8 support for express card
Add Bayhub new chip GG8 support for SD express card.
This patch depends on patch 1/2.

Signed-off-by: Chevron Li <chevron.li@bayhubtech.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230811033517.11532-2-chevron_li@126.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-08-11 12:30:54 +02:00
Chevron Li
3d757ddbd6 mmc: sdhci-pci-o2micro: add Bayhub new chip GG8 support for UHS-I
Add Bayhub new chip GG8 support for UHS-I function

Signed-off-by: Chevron Li <chevron.li@bayhubtech.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230811033517.11532-1-chevron_li@126.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-08-11 12:30:54 +02:00
David S. Miller
4b006b43b8 Merge branch 'bond-cleanups'
Zhengchao Shao says:

====================
bonding: do some cleanups in bond driver

Do some cleanups in bond driver.

---
v2: use IS_ERR instead of NULL check in patch 2/5, update commit
    information in patch 3/5, remove inline modifier in patch 4/5
====================

Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-11 11:10:55 +01:00
Zhengchao Shao
f5370ba359 bonding: remove unnecessary NULL check in bond_destructor
The free_percpu function also could check whether "rr_tx_counter"
parameter is NULL. Therefore, remove NULL check in bond_destructor.

Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-11 11:10:55 +01:00
Zhengchao Shao
a8f3f4b448 bonding: use bond_set_slave_arr to simplify code
In bond_reset_slave_arr(), values are assigned and memory is released only
when the variables "usable" and "all" are not NULL. But even if the
"usable" and "all" variables are NULL, they can still work, because value
will be checked in kfree_rcu. Therefore, use bond_set_slave_arr() and set
the input parameters "usable_slaves" and "all_slaves" to NULL to simplify
the code in bond_reset_slave_arr(). And the same to bond_uninit().

Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-11 11:10:55 +01:00
Zhengchao Shao
cc317ea3d9 bonding: remove redundant NULL check in debugfs function
Because debugfs_create_dir returns ERR_PTR, so bonding_debug_root will
never be NULL. Remove redundant NULL check for bonding_debug_root in
debugfs function. The later debugfs_create_dir/debugfs_remove_recursive
/debugfs_remove_recursive functions will check the dentry with IS_ERR().

Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-11 11:10:55 +01:00
Zhengchao Shao
57647e6fdf bonding: use IS_ERR instead of NULL check in bond_create_debugfs
Because debugfs_create_dir returns ERR_PTR, so IS_ERR should be used to
check whether the directory is successfully created.

Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-11 11:10:55 +01:00
Zhengchao Shao
e08190ef51 bonding: add modifier to initialization function and exit function
Some functions are only used in initialization and exit functions, so add
the __init/__net_init and __net_exit modifiers to these functions.

Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-11 11:10:55 +01:00
Xiang Yang
829c6524d6 net: pcs: Add missing put_device call in miic_create
The reference of pdev->dev is taken by of_find_device_by_node, so
it should be released when not need anymore.

Fixes: 7dc54d3b8d ("net: pcs: add Renesas MII converter driver")
Signed-off-by: Xiang Yang <xiangyang3@huawei.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-11 10:21:07 +01:00
Krzysztof Kozlowski
e5cd429e79 net/marvell: fix Wvoid-pointer-to-enum-cast warning
'type' is an enum, thus cast of pointer on 64-bit compile test with
W=1 causes:

  mvmdio.c:272:9: error: cast to smaller integer type 'enum orion_mdio_bus_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-11 09:58:45 +01:00
Krzysztof Kozlowski
c5b0c34fae net/xgene: fix Wvoid-pointer-to-enum-cast warning
'enet_id' is an enum, thus cast of pointer on 64-bit compile test with
W=1 causes:

  xgene_enet_main.c:2044:20: error: cast to smaller integer type 'enum xgene_enet_id' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-11 09:58:45 +01:00
Shradha Gupta
ac3899c622 net: mana: Add gdma stats to ethtool output for mana
Extended performance counter stats in 'ethtool -S <interface>'
for MANA VF to include GDMA tx LSO packets and bytes count.

Tested-on: Ubuntu22
Testcases:
1. LISA testcase:
PERF-NETWORK-TCP-THROUGHPUT-MULTICONNECTION-NTTTCP-Synthetic
2. LISA testcase:
PERF-NETWORK-TCP-THROUGHPUT-MULTICONNECTION-NTTTCP-SRIOV
3. Validated the GDMA stat packets and byte counters
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-11 09:53:59 +01:00
Sathesh Edara
a20b4c5f3a octeon_ep: Add control plane host and firmware versions.
Implement control plane mailbox versions for host and firmware.
Versions are published in info area of control mailbox bar4
memory structure.Firmware will publish minimum and maximum
supported versions.Control plane mailbox apis will check for
firmware version before sending any control commands to firmware.
Notifications from firmware will similarly be checked for host
version compatibility.

Signed-off-by: Sathesh Edara <sedara@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-11 09:51:01 +01:00
Jason Wang
51b813176f virtio-net: set queues after driver_ok
Commit 25266128fe ("virtio-net: fix race between set queues and
probe") tries to fix the race between set queues and probe by calling
_virtnet_set_queues() before DRIVER_OK is set. This violates virtio
spec. Fixing this by setting queues after virtio_device_ready().

Note that rtnl needs to be held for userspace requests to change the
number of queues. So we are serialized in this way.

Fixes: 25266128fe ("virtio-net: fix race between set queues and probe")
Reported-by: Dragos Tatulea <dtatulea@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-11 09:50:14 +01:00
Stanislaw Gruszka
efcb492d77 accel/ivpu: Document DRM_IVPU_PARAM_CAPABILITIES
Add comments regarding new DRM_IVPU_PARAM_CAPABILITIES param.

Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230810080707.3545883-1-stanislaw.gruszka@linux.intel.com
2023-08-11 10:48:23 +02:00
Krzysztof Kozlowski
7451eecf1e phy: marvell pxa-usb: fix Wvoid-pointer-to-enum-cast warning
'version' is an enum, thus cast of pointer on 64-bit compile test with
W=1 causes:

  phy-pxa-usb.c:299:26: error: cast to smaller integer type 'enum pxa_usb_phy_version' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810111958.205705-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-11 09:25:15 +01:00
Krzysztof Kozlowski
2bc00b9b90 phy: broadcom: sr-usb: fix Wvoid-pointer-to-enum-cast warning
'version' is an enum, thus cast of pointer on 64-bit compile test with
W=1 causes:

  phy-bcm-sr-usb.c:314:13: error: cast to smaller integer type 'enum bcm_usb_phy_version' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810111958.205705-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-11 09:25:14 +01:00
Krzysztof Kozlowski
bd6e74a2f0 phy: broadcom: ns-usb3: fix Wvoid-pointer-to-enum-cast warning
'family' is an enum, thus cast of pointer on 64-bit compile test with
W=1 causes:

  drivers/phy/broadcom/phy-bcm-ns-usb3.c:209:17: error: cast to smaller integer type 'enum bcm_ns_family' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810111958.205705-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-11 09:25:14 +01:00
Krzysztof Kozlowski
d35c12b7db phy: broadcom: sata: fix Wvoid-pointer-to-enum-cast warning
'version' is an enum, thus cast of pointer on 64-bit compile test with
W=1 causes:

  phy-brcm-sata.c:775:19: error: cast to smaller integer type 'enum brcm_sata_phy_version' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810111958.205705-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-11 09:25:14 +01:00
Ratheesh Kannoth
12aa0a3b93 octeontx2-af: Harden rule validation.
Accept TC offload classifier rule only if SPI field
can be extracted by HW.

Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-11 09:23:21 +01:00
Rohit Agarwal
aff7625322 dt-bindings: phy: qcom,snps-eusb2-repeater: Add compatible for PM7550BA
Add a dt-bindings compatible string for the Qualcomm's PM7550BA PMIC.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1691415534-31820-2-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-11 09:23:04 +01:00
Lukas Bulwahn
6ac1bb8695 MAINTAINERS: correct file entry in STARFIVE JH7110 DPHY RX DRIVER
Commit f8aa660841 ("phy: starfive: Add mipi dphy rx support") adds the
MAINTAINERS section STARFIVE JH7110 DPHY RX DRIVER referring to
'phy-starfive-dphy-rx.c', but the file actually added in this commit is
named 'phy-jh7110-dphy-rx.c'.

Correct the file entry in STARFIVE JH7110 DPHY RX DRIVER.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Link: https://lore.kernel.org/r/20230731114856.14401-1-lukas.bulwahn@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-11 09:19:12 +01:00
Dmitry Baryshkov
b102ce6d84 phy: qcom: qmp-ufs: add missing offsets to sm8150 configuration
The conversion commit 7559e7572c ("phy: Explicitly include correct DT
includes") misses offsets configuration for sm8150 (most likely it was
developed separately from the series adding HS G4 support and was not
adapted for the sm8150/sm8250 configuration split).

Add missing offsets to sm8150_ufsphy_cfg.

Fixes: 7559e7572c ("phy: Explicitly include correct DT includes")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230731111009.3998089-1-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-11 09:17:19 +01:00
Jeff Layton
50e9ceef1d
btrfs: convert to multigrain timestamps
Enable multigrain timestamps, which should ensure that there is an
apparent change to the timestamp whenever it has been written after
being actively observed via getattr.

Beyond enabling the FS_MGTIME flag, this patch eliminates
update_time_for_write, which goes to great pains to avoid in-memory
stores. Just have it overwrite the timestamps unconditionally.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230807-mgctime-v7-13-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-11 09:04:58 +02:00
Jeff Layton
0269b58586
ext4: switch to multigrain timestamps
Enable multigrain timestamps, which should ensure that there is an
apparent change to the timestamp whenever it has been written after
being actively observed via getattr.

For ext4, we only need to enable the FS_MGTIME flag.

Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230807-mgctime-v7-12-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-11 09:04:57 +02:00
Jeff Layton
e44df26647
xfs: switch to multigrain timestamps
Enable multigrain timestamps, which should ensure that there is an
apparent change to the timestamp whenever it has been written after
being actively observed via getattr.

Also, anytime the mtime changes, the ctime must also change, and those
are now the only two options for xfs_trans_ichgtime. Have that function
unconditionally bump the ctime, and ASSERT that XFS_ICHGTIME_CHG is
always set.

Acked-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230807-mgctime-v7-11-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-11 09:04:57 +02:00
Jeff Layton
d48c339729
tmpfs: add support for multigrain timestamps
Enable multigrain timestamps, which should ensure that there is an
apparent change to the timestamp whenever it has been written after
being actively observed via getattr.

tmpfs only requires the FS_MGTIME flag.

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230807-mgctime-v7-10-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-11 09:04:57 +02:00
Jeff Layton
ffb6cf19e0
fs: add infrastructure for multigrain timestamps
The VFS always uses coarse-grained timestamps when updating the ctime
and mtime after a change. This has the benefit of allowing filesystems
to optimize away a lot metadata updates, down to around 1 per jiffy,
even when a file is under heavy writes.

Unfortunately, this has always been an issue when we're exporting via
NFSv3, which relies on timestamps to validate caches. A lot of changes
can happen in a jiffy, so timestamps aren't sufficient to help the
client decide to invalidate the cache. Even with NFSv4, a lot of
exported filesystems don't properly support a change attribute and are
subject to the same problems with timestamp granularity. Other
applications have similar issues with timestamps (e.g backup
applications).

If we were to always use fine-grained timestamps, that would improve the
situation, but that becomes rather expensive, as the underlying
filesystem would have to log a lot more metadata updates.

What we need is a way to only use fine-grained timestamps when they are
being actively queried.

POSIX generally mandates that when the the mtime changes, the ctime must
also change. The kernel always stores normalized ctime values, so only
the first 30 bits of the tv_nsec field are ever used.

Use the 31st bit of the ctime tv_nsec field to indicate that something
has queried the inode for the mtime or ctime. When this flag is set,
on the next mtime or ctime update, the kernel will fetch a fine-grained
timestamp instead of the usual coarse-grained one.

Filesytems can opt into this behavior by setting the FS_MGTIME flag in
the fstype. Filesystems that don't set this flag will continue to use
coarse-grained timestamps.

Later patches will convert individual filesystems to use the new
infrastructure.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230807-mgctime-v7-9-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-11 09:04:57 +02:00
Jeff Layton
913e99287b
fs: drop the timespec64 argument from update_time
Now that all of the update_time operations are prepared for it, we can
drop the timespec64 argument from the update_time operation. Do that and
remove it from some associated functions like inode_update_time and
inode_needs_update_time.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230807-mgctime-v7-8-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-11 09:04:57 +02:00
Jeff Layton
51b0f3ebdb
xfs: have xfs_vn_update_time gets its own timestamp
In later patches we're going to drop the "now" parameter from the
update_time operation. Prepare XFS for this by reworking how it fetches
timestamps and sets them in the inode. Ensure that we update the ctime
even if only S_MTIME is set.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230807-mgctime-v7-7-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-11 09:04:56 +02:00
Jeff Layton
6f4aaee3fa
fat: make fat_update_time get its own timestamp
In later patches, we're going to drop the "now" parameter from the
update_time operation. Fix fat_update_time to fetch its own timestamp.
It turns out that this is easily done by just passing a NULL timestamp
pointer to fat_truncate_time.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Frank Sorenson <sorenson@redhat.com>
Message-Id: <20230810-ctime-fat-v1-2-327598fd1de8@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-11 09:04:56 +02:00
Jeff Layton
93e6c30435
fat: remove i_version handling from fat_update_time
commit 6bb885ecd7 (fat: add functions to update and truncate
timestamps appropriately") added an update_time routine for fat. That
patch added a section for handling the S_VERSION bit, even though FAT
doesn't enable SB_I_VERSION and the S_VERSION bit will never be set when
calling it.

Remove the section for handling S_VERSION since it's effectively dead
code, and will be problematic vs. future changes.

Cc: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Frank Sorenson <sorenson@redhat.com>
Message-Id: <20230810-ctime-fat-v1-1-327598fd1de8@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-11 09:04:56 +02:00
Jeff Layton
97ebfdb7ad
ubifs: have ubifs_update_time use inode_update_timestamps
In later patches, we're going to drop the "now" parameter from the
update_time operation. Prepare ubifs for this, by having it use the new
inode_update_timestamps helper.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230807-mgctime-v7-6-d1dec143a704@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-11 09:03:34 +02:00
Pierre-Louis Bossart
e66f91a2d1 soundwire: intel_auxdevice: add hybrid IDA-based device_number allocation
The IDA-based allocation is useful to simplify debug, but it was also
introduced as a prerequisite to deal with the Intel Lunar Lake
hardware programming sequences: the wake-ups have to be handled with a
system-unique SDI address at the HDaudio controller level.

At the time, the restriction introduced by the IDA to 8 devices total
seemed perfectly fine, but recently hardware vendors created
configurations with more than 8 devices.

Add a new allocation strategy to allow for more than 8 devices using
information on the type of devices, and only use the IDA-based
allocation for devices capable of generating a wake.

In theory the information on wake capabilities should come from
firmware, but none of the existing ACPI tables provide it. The drivers
set the 'wake_capable' property, but this cannot be used reliably: if
the driver probe happens *after* the enumeration, then that property
is not initialized yet. Trying to modify the device_number on-the-fly
proved to be an impossible task generating race conditions left and
right.

The only reliable work-around to control the enumeration is to add a
quirk table. It's ugly but until platform firmware improves, hopefully as a
result of MIPI/SDCA stardization, we can expect that quirk table to
grow for each new headset or microphone codec.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230731091333.3593132-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-08-11 07:59:25 +01:00