snd_soc_dai_driver array in wcd938x driver has two entries whose order
must match order of wcd938x->sdw_priv array. The wcd938x_bind() and
wcd938x_codec_set_sdw_stream() rely on this order. wcd938x->sdw_priv
array is indexed by enum with AIF1_PB and AIF1_CAP, so use the same
defines instead of raw numners for snd_soc_dai_driver array.
No functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231019144108.42853-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Using the params_channels() helper when setting hw_params, results in
passing to Audioreach minimum number of channels valid for given
hardware. This is not valid for any hardware which sets minimum
channels to two and maximum to something bigger, like four channels.
Instead pass the maximum number of supported channels to allow playback
of multi-channel formats.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231017161429.431663-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Some sc7180 devices use audio adsp to play sound. The setup for this
adsp is similar to the dirrect lpass usage but requires the use of
different link ids and clocks.
This commit adds support for the qdsp based audio, reusing the common
parts like audio codec setup and jack creation.
Since the setup is mostly generic and codec specific setup is guarded
behind a check, a generic compatible is added, similar to other
platforms. Even though those changes target Acer Aspire 1 as the only
user of the adsp audio on this platform present upstream at the moment
of the commit, those changes should be either dirrectly compatible or
trivially expandable to the other devices that will be added in the
future.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20231020-sc7180-qdsp-sndcard-v1-2-157706b7d06f@trvn.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
sc7180 can make use of the adsp-baked soundcard, add relevant compatible
to the documentation.
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231020-sc7180-qdsp-sndcard-v1-1-157706b7d06f@trvn.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Unlike all designs supported sofar the Lenovo Yoga Tab 3 YT3-X90 does not
have its internal microphone (intmic) on IN3L with the headset microphone
on IN1L. Instead this tablet has the intmic on IN1L and the hsmic on IN2L.
Add a BYT_WM5102_IN_MAP quirk mechanism to allow selecting between
different input maps and add support for both setups with the current
settings being the default map.
The new INTMIC_IN1L_HSMIC_IN2L map is enabled by default on CHT because
the Lenovo Yoga Tab 3 YT3-X90 model is the only Cherry Trail design
currently supported. If different CHT designs turn up which need different
input maps we can add DMI quirks to select a different map later.
The userspace UCM profile also needs to know about this so
extend the components string with this info too.
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231025143513.291753-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some x86 WM5102 designs don't use the SPK pins for speaker output
instead they use the HPOUT2L + HPOUT2R for the speakers.
Add an BYT_WM5102_OUT_MAP quirk mechanism to allow selecting
between 2 output maps, one for the speakers on the SPK output pins
and one for the speakers on the HPOUT2 pins.
The new HPOUT2 map is enabled by default on CHT because this is used on
the Lenovo Yoga Tab 3 YT3-X90 model which is the only Cherry Trail design
currently supported. If different CHT designs turn up which need different
output maps we can add DMI quirks to select a different map later.
The userspace UCM profile also needs to know about this so
setup a components string with this info too.
While at it also drop the unused "Line Out" route.
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231025143513.291753-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Cherry Trail SoC only supports 19200000 as clk-frequency for
the pmc_plt_clk used for the audio codec.
Add a BYT_WM5102_MCLK_19_2MHZ quirk for this and enable this
by default on Cherry Trail SoCs.
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231025143513.291753-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the standard intel board file quirk mechanism also used in many
other intel board drivers and add a BYT_WM5102_SSP2 quirk setting
for designs using SSP2 instead of SSP0.
And enable the new BYT_WM5102_SSP2 quirk on Cherry Trail devices
since those always use SSP2.
The logging of the quirks uses dev_info_once() because probe() may run
multiple times because of snd_soc_register_card() returning -EPROBE_DEFER.
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231025143513.291753-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This file was renamed from .txt to .rst and left a dangling reference.
Fix it.
Fixes: 151f4e2bdc ("docs: power: convert docs to ReST and rename to *.rst")
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The main motivation is to repeat that dumb buffers should not be
abused for anything else than basic software rendering with KMS.
User-space devs are more likely to look at the IOCTL docs than to
actively search for the driver-oriented "Dumb Buffer Objects"
section.
v2: reference DRM_CAP_DUMB_BUFFER, DRM_CAP_DUMB_PREFERRED_DEPTH and
DRM_CAP_DUMB_PREFER_SHADOW (Pekka)
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230821131548.269204-1-contact@emersion.fr
When a CPU is about to be offlined, x86 validates that all active
interrupts which are targeted to this CPU can be migrated to the remaining
online CPUs. If not, the offline operation is aborted.
The validation uses irq_matrix_allocated() to retrieve the number of
vectors which are allocated on the outgoing CPU. The returned number of
allocated vectors includes also vectors which are associated to managed
interrupts.
That's overaccounting because managed interrupts are:
- not migrated when the affinity mask of the interrupt targets only
the outgoing CPU
- migrated to another CPU, but in that case the vector is already
pre-allocated on the potential target CPUs and must not be taken into
account.
As a consequence the check whether the remaining online CPUs have enough
capacity for migrating the allocated vectors from the outgoing CPU might
fail incorrectly.
Let irq_matrix_allocated() return only the number of allocated non-managed
interrupts to make this validation check correct.
[ tglx: Amend changelog and fixup kernel-doc comment ]
Fixes: 2f75d9e1c9 ("genirq: Implement bitmap matrix allocator")
Reported-by: Wendy Wang <wendy.wang@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20231020072522.557846-1-yu.c.chen@intel.com
Document the use of the "earlyprintk=bios[,keep]" kernel parameter
option on SuperH systems with a SuperH standard BIOS.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/febc920964f2f0919d21775132e84c5cc270177e.1697708489.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
The SuperH BIOS earlyprintk code is protected by CONFIG_EARLY_PRINTK.
However, when this protection was added, it was missed that SuperH no
longer defines an EARLY_PRINTK config symbol since commit
e76fe57447 ("sh: Remove old early serial console code V2"), so
BIOS earlyprintk can no longer be used.
Fix this by reviving the EARLY_PRINTK config symbol.
Fixes: d0380e6c3c ("early_printk: consolidate random copies of identical code")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/c40972dfec3dcc6719808d5df388857360262878.1697708489.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
These functions were only used on the microdev board that is now gone,
so remove them to simplify the ioport handling. This could be further
simplified to use the generic I/O port accessors now.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230914155523.3839811-4-arnd@kernel.org
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
The superhyway bus driver was only referenced on SH4-202, which is now gone,
so remove it all as well.
I could find no trace of anything ever calling superhyway_register_driver(),
not in the git history but also not on the web, so I assume this has never
served any purpose on mainline kernels.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230914155523.3839811-3-arnd@kernel.org
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
This early prototype of the SH4 CPU was only used in the "microdev" board
that is now removed, so all of the SH4-202 supoprt can also be removed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230914155523.3839811-2-arnd@kernel.org
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
This board was an early prototype platform for early SH4 CPUs and related
to the already removed SH5 cayman platform.
The microdev board itself has been kept in the tree for this long despite
being in a bad shape even 20 years ago when it got merged, with no working
PCI support and ugly workarounds for its I/O port implementation that
try to emulate PC style peripheral access despite being quite different
in reality.
As far as I can tell, the ethernet, display, USB and PCI devices on it
already broke at some point (afbb9d8d52, 46bc858720), so I think
we can just removeit entirely.
Link: https://lore.kernel.org/lkml/09094baf-dadf-4bce-9f63-f2a1f255f9a8@app.fastmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230914155523.3839811-1-arnd@kernel.org
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
This reverts the following commits:
commit 53313ed25b ("dt-bindings: marvell: Add Marvell MV88E6060 DSA schema")
commit 0f35369b4e ("dt-bindings: marvell: Rewrite MV88E6xxx in schema")
commit 605a5f5d40 ("ARM64: dts: marvell: Fix some common switch mistakes")
commit bfedd84236 ("ARM: dts: nxp: Fix some common switch mistakes")
commit 2b83557a58 ("ARM: dts: marvell: Fix some common switch mistakes")
commit ddae07ce9b ("dt-bindings: net: mvusb: Fix up DSA example")
commit b5ef61718a ("dt-bindings: net: dsa: Require ports or ethernet-ports")
As repoted by Vladimir, it breaks boot on the Turris MOX board.
Link: https://lore.kernel.org/all/20231025093632.fb2qdtunzaznd73z@skbuf/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When allocating a new pool at runtime, reduce the number of slabs so
that the allocation order is at most MAX_ORDER. This avoids a kernel
warning in __alloc_pages().
The warning is relatively benign, because the pool size is subsequently
reduced when allocation fails, but it is silly to start with a request
that is known to fail, especially since this is the default behavior if
the kernel is built with CONFIG_SWIOTLB_DYNAMIC=y and booted without any
swiotlb= parameter.
Reported-by: Ben Greear <greearb@candelatech.com>
Closes: https://lore.kernel.org/netdev/4f173dd2-324a-0240-ff8d-abf5c191be18@candelatech.com/
Fixes: 1aaa736815 ("swiotlb: allocate a new memory pool when existing pools are full")
Signed-off-by: Petr Tesarik <petr.tesarik1@huawei-partners.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If an application does O_DIRECT writes with io_uring and the file system
supports IOCB_DIO_CALLER_COMP, then completions of the dio write side is
done from the task_work that will post the completion event for said
write as well.
Whenever a dio write is done against a file, the inode i_dio_count is
elevated. This enables other callers to use inode_dio_wait() to wait for
previous writes to complete. If we defer the full dio completion to
task_work, we are dependent on that task_work being run before the
inode i_dio_count can be decremented.
If the same task that issues io_uring dio writes with
IOCB_DIO_CALLER_COMP performs a synchronous system call that calls
inode_dio_wait(), then we can deadlock as we're blocked sleeping on
the event to become true, but not processing the completions that will
result in the inode i_dio_count being decremented.
Until we can guarantee that this is the case, then disable the deferred
caller completions.
Fixes: 099ada2c87 ("io_uring/rw: add write support for IOCB_DIO_CALLER_COMP")
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Kernel-internal prototypes, references to current_thread_info()
and code hidden behind a CONFIG_HEXAGON_ARCH_VERSION switch are
certainly not usable in userspace, so this should not reside
in a uapi header. Move the code into an internal version of
ptrace.h instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Originally we were quirking ASPM disabled specifically for VI when
used with Alder Lake, but it appears to have problems with Rocket
Lake as well.
Like we've done in the case of dpm for newer platforms, disable
ASPM for all Intel systems.
Cc: stable@vger.kernel.org # 5.15+
Fixes: 0064b0ce85 ("drm/amd/pm: enable ASPM by default")
Reported-and-tested-by: Paolo Gentili <paolo.gentili@canonical.com>
Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2036742
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We could race with SQ thread exit, and if we do, we'll hit a NULL pointer
dereference when the thread is cleared. Grab the SQPOLL data lock before
attempting to get the task cpu and pid for fdinfo, this ensures we have a
stable view of it.
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218032
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Previously cp2112_gpio_irq_shutdown() always cancelled the
gpio_poll_worker, even if other IRQs were still active, and did not set
the gpio_poll flag to false. This resulted in any call to _shutdown()
resulting in interrupts no longer functioning on the chip until a
_remove() occurred (a.e. the cp2112 is unplugged or system rebooted).
Only cancel polling if all IRQs are disabled/masked, and correctly set
the gpio_poll flag, allowing polling to restart when an interrupt is
next enabled.
Signed-off-by: Danny Kaehn <danny.kaehn@plexus.com>
Fixes: 13de9cca51 ("HID: cp2112: add IRQ chip handling")
Link: https://lore.kernel.org/r/20231011182317.1053344-1-danny.kaehn@plexus.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect both `params` and `id` to be NUL-terminated based on their
usage with format strings:
format_node_data(iuparams, iunodeid, &lir->incident_node);
format_node_data(auparams, aunodeid, &lir->attached_node);
switch (lir->iq.class) {
case LIR_IQ_CLASS_DEGRADED:
pr_warn("Link degraded: RS=%02x RSID=%04x IC=%02x "
"IUPARAMS=%s IUNODEID=%s AUPARAMS=%s AUNODEID=%s\n",
sei_area->rs, sei_area->rsid, lir->ic, iuparams,
iunodeid, auparams, aunodeid);
NUL-padding is not required as both `params` and `id` have been memset
to 0:
memset(params, 0, PARAMS_LEN);
memset(id, 0, NODEID_LEN);
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Note that there's no overread bugs in the current implementation as the
string literal "n/a" has a size much smaller than PARAMS_LEN or
NODEID_LEN. Nonetheless, let's favor strscpy().
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231023-strncpy-drivers-s390-cio-chsc-c-v1-1-8b76a7b83260@google.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Fix virtual vs physical address confusion (which currently are the
same).
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Change format of the "cmg" sysfs attribute from hex to decimal to
make it easier to consume. Note that this should not break any existing
users since only values 2 and 3 are currently exported. Also the main
user already assumes decimal notation [1].
[1] https://sourceforge.net/p/sblim/gather/ci/master/tree/plugin/metriczCH.c
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
If the cmma no-dat feature is available the kernel page tables are walked
to identify and mark all pages which are used for address translation (all
region, segment, and page tables). In a subsequent loop all other pages are
marked as "no-dat" pages with the ESSA instruction.
This information is visible to the hypervisor, so that the hypervisor can
optimize purging of guest TLB entries. All pages used for swapper_pg_dir
and invalid_pg_dir are incorrectly marked as no-dat, which in turn can
result in incorrect guest TLB flushes.
Fix this by marking those pages correctly as being used for DAT.
Cc: <stable@vger.kernel.org>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
If the cmma no-dat feature is available the kernel page tables are walked
to identify and mark all pages which are used for address translation (all
region, segment, and page tables). In a subsequent loop all other pages are
marked as "no-dat" pages with the ESSA instruction.
This information is visible to the hypervisor, so that the hypervisor can
optimize purging of guest TLB entries. The initial loop however is
incorrect: only the first three of the four pages which belong to segment
and region tables will be marked as being used for DAT. The last page is
incorrectly marked as no-dat.
This can result in incorrect guest TLB flushes.
Fix this by simply marking all four pages.
Cc: <stable@vger.kernel.org>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When new memory notifier types are added in common code and
unimplemented on s390, return success instead of EINVAL return code.
This prevents breakage when new memory notifier types are added.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Function paicrypt_event_init() initializes the PMU device driver
specific details for an event. It is called once per event creation.
The function paicrypt_event_init() is not necessarily executed on
that CPU the event will be used for.
When an event is activated, function paicrypt_start() is used to
start the event on that CPU.
The per CPU data structure struct paicrypt_map has a pointer to
the event which is active for a particular CPU. This pointer is
set in function paicrypt_start() to point to the currently installed
event. There is no need to also set this pointer in function
paicrypt_event_init() where is might be assigned to the wrong CPU.
Therefore remove this assignment in paicrypt_event_init().
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Event count value is initialized and set to zero in function
paicrypt_start(). This function is called once per CPU when an
event is started on that CPU. This leads to event count value
being set to zero as many times as there are online CPUs.
This is not necessary. The event count value is bound to the event
and it is sufficient to initialize the event counter once at
event creation time. This is done when the event structure
is dynamicly allocated with __GFP_ZERO flag. This sets
member count to zero.
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use define PERF_ATTACH_TASK bit in event->attach_state to determine
system wide invocation or per task invocation in event initialization.
This bit is set in common code and before calling PMU device driver
specific event initialization.
It is set once and never changes. It is save to use and also in
sync with other PMU specific code.
No functional change.
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
If the cmma no-dat feature is available all pages that are not used for
dynamic address translation are marked as "no-dat" with the ESSA
instruction. This information is visible to the hypervisor, so that the
hypervisor can optimize purging of guest TLB entries. This also means that
pages which are used for dynamic address translation must not be marked as
"no-dat", since the hypervisor may then incorrectly not purge guest TLB
entries.
Region, segment, and page tables allocated within the gmap code are
incorrectly marked as "no-dat", since an explicit call to
arch_set_page_dat() is missing, which would remove the "no-dat" mark.
In order to fix this add a new gmap_alloc_crst() function which should
be used to allocate region and segment tables, and which also calls
arch_set_page_dat().
Also add the arch_set_page_dat() call to page_table_alloc_pgste().
Cc: <stable@vger.kernel.org>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Detailed description for this pull request:
1. Update devfreq core
- Switch to dev_pm_opp_find_freq_(ceil/floor)_indexed() APIs
to support the specific device like UFS which handle the multiple clocks
through OPP (Operationg Performance Point) framework.
2. Update the devfreq / devfreq-event drivers
- Add perf support to the Rockchip DFI(DDR Monitor Module) devfreq-event driver.
: Generalize rockchip-dfi.c to support new RK3568/RK3588 using different DDR type.
: Covert devicetree bidning document format to yaml.
: DFI is a unit which is suitable for measuring DDR utilization
for the DDR frequency scaling driver. Add perf support feature
to rockchip-dfi.c to extend DFI usage. The perf support has been tested
on a RK3568 and a RK3399.
- Protect the OPP handling code in critical section
because the voltage of shared OPP might be changed by multiple drivers
on Mediatek CCI devfreq driver.
- Use device_get_match_data() on Samsung Exynos PPMU devfreq-event driver.
-----BEGIN PGP SIGNATURE-----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=lh9c
-----END PGP SIGNATURE-----
Merge tag 'devfreq-next-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux
Merge devfreq updates for v6.7 from Chanwoo Choi:
" Detailed description for this pull request:
1. Update devfreq core
- Switch to dev_pm_opp_find_freq_(ceil/floor)_indexed() APIs
to support the specific device like UFS which handle the multiple clocks
through OPP (Operationg Performance Point) framework.
2. Update the devfreq / devfreq-event drivers
- Add perf support to the Rockchip DFI(DDR Monitor Module) devfreq-event driver.
: Generalize rockchip-dfi.c to support new RK3568/RK3588 using different DDR type.
: Covert devicetree bidning document format to yaml.
: DFI is a unit which is suitable for measuring DDR utilization
for the DDR frequency scaling driver. Add perf support feature
to rockchip-dfi.c to extend DFI usage. The perf support has been tested
on a RK3568 and a RK3399.
- Protect the OPP handling code in critical section
because the voltage of shared OPP might be changed by multiple drivers
on Mediatek CCI devfreq driver.
- Use device_get_match_data() on Samsung Exynos PPMU devfreq-event driver."
* tag 'devfreq-next-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux: (26 commits)
dt-bindings: devfreq: event: rockchip,dfi: Add rk3588 support
dt-bindings: devfreq: event: rockchip,dfi: Add rk3568 support
dt-bindings: devfreq: event: convert Rockchip DFI binding to yaml
PM / devfreq: rockchip-dfi: add support for RK3588
PM / devfreq: rockchip-dfi: account for multiple DDRMON_CTRL registers
PM / devfreq: rockchip-dfi: make register stride SoC specific
PM / devfreq: rockchip-dfi: Add perf support
PM / devfreq: rockchip-dfi: give variable a better name
PM / devfreq: rockchip-dfi: Prepare for multiple users
PM / devfreq: rockchip-dfi: Pass private data struct to internal functions
PM / devfreq: rockchip-dfi: Handle LPDDR4X
PM / devfreq: rockchip-dfi: Handle LPDDR2 correctly
PM / devfreq: rockchip-dfi: Add RK3568 support
PM / devfreq: rockchip-dfi: Clean up DDR type register defines
PM / devfreq: rk3399_dmc,dfi: generalize DDRTYPE defines
PM / devfreq: rockchip-dfi: introduce channel mask
PM / devfreq: rockchip-dfi: Use free running counter
PM / devfreq: mediatek: unlock on error in mtk_ccifreq_target()
PM / devfreq: exynos-ppmu: Use device_get_match_data()
PM / devfreq: rockchip-dfi: dfi store raw values in counter struct
...
When the driver unbinds, pmu is unregistered and i915->uabi_engines is
set to RB_ROOT. Due to this, when i915 PMU tries to stop the engine
events, it issues a warn_on because engine lookup fails.
All perf hooks are taking care of this using a pmu->closed flag that is
set when PMU unregisters. The stop event seems to have been left out.
Check for pmu->closed in pmu_event_stop as well.
Based on discussion here -
https://patchwork.freedesktop.org/patch/492079/?series=105790&rev=2
v2: s/is/if/ in commit title
v3: Add fixes tag and cc stable
Cc: <stable@vger.kernel.org> # v5.11+
Fixes: b00bccb3f0 ("drm/i915/pmu: Handle PCI unbind")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231020152441.3764850-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 31f6a06f0c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add interrupt support for under-voltage notification. This functionality
can be used on systems capable to detect under-voltage state and having
enough capacity to let the SoC do some emergency preparation.
This change enforce default policy to shutdown system as soon as
interrupt is triggered.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20231025084614.3092295-6-o.rempel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
