Add TransmissionOverrun as per defined by IEEE 802.1Q Bridges.
TransmissionOverrun counter shall be incremented if the implementation
detects that a frame from a given queue is still being transmitted by
the MAC when that gate-close event for that queue occurs.
This counter is utilised by the Certification conformance test to
inform the user application whether any packets are currently being
transmitted on a particular queue during a gate-close event.
Intel Discrete I225/I226 have a mechanism to not transmit a packets if
the gate open time is insufficient for the packet transmission by setting
the Strict_End bit. Thus, it is expected for this counter to be always
zero at this moment.
Inspired from enetc_taprio_stats() and enetc_taprio_queue_stats(), now
driver also report the tx_overruns counter per traffic class.
User can get this counter by using below command:
1) tc -s qdisc show dev <interface> root
2) tc -s class show dev <interface>
Test Result (Before):
class mq :1 root
Sent 1289 bytes 20 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
class mq :2 root
Sent 124 bytes 2 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
class mq :3 root
Sent 46028 bytes 86 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
class mq :4 root
Sent 2596 bytes 14 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
Test Result (After):
class taprio 100:1 root
Sent 8491 bytes 38 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
Transmit overruns: 0
class taprio 100:2 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
Transmit overruns: 0
class taprio 100:3 root
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
Transmit overruns: 0
class taprio 100:4 root
Sent 994 bytes 11 pkt (dropped 0, overlimits 0 requeues 1)
backlog 0b 0p requeues 1
Transmit overruns: 0
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230714201428.1718097-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Handle signed error return values returned by simple_write_to_buffer().
In case of an error, return the error code.
Fixes: 3c3d818a93 ("firmware: arm_scmi: Add core raw transmission support")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Sukrut Bellary <sukrut.bellary@linux.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20230718085529.258899-1-sukrut.bellary@linux.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-07-14 (ice)
This series contains updates to ice driver only.
Petr Oros removes multiple calls made to unregister netdev and
devlink_port.
Michal fixes null pointer dereference that can occur during reload.
====================
Link: https://lore.kernel.org/r/20230714201041.1717834-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20230714174922.4063153-1-robh@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The index field of the struct page corresponding to a guest ASCE should
be 0. When replacing the ASCE in s390_replace_asce(), the index of the
new ASCE should also be set to 0.
Having the wrong index might lead to the wrong addresses being passed
around when notifying pte invalidations, and eventually to validity
intercepts (VM crash) if the prefix gets unmapped and the notifier gets
called with the wrong address.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Fixes: faa2f72cb3 ("KVM: s390: pv: leak the topmost page table when destroy fails")
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20230705111937.33472-3-imbrenda@linux.ibm.com>
Simplify the shutdown of non-protected VMs. There is no need to do
complex manipulations of the counter if it was zero.
This also fixes a very rare race which caused pages to be torn down
from the address space with a non-zero counter even on older machines
that don't support the UVC instruction, causing a crash.
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Fixes: fb491d5500 ("KVM: s390: pv: asynchronous destroy for reboot")
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20230705111937.33472-2-imbrenda@linux.ibm.com>
Commit 35727af2b1 ("irqchip/gicv3: Workaround for NVIDIA erratum
T241-FABRIC-4") moved the initialisation of the SoC version to
arm_smccc_version_init() but forgot to update the results structure
and it's usage.
Fix the use of the uninitialised results structure and update the
error strings.
Fixes: 35727af2b1 ("irqchip/gicv3: Workaround for NVIDIA erratum T241-FABRIC-4")
Signed-off-by: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Vikram Sethi <vsethi@nvidia.com>
Cc: Shanker Donthineni <sdonthineni@nvidia.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230717171702.424253-1-punit.agrawal@bytedance.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Create a new netconsole runtime option that prepends the kernel version in
the netconsole message. This is useful to map kernel messages to kernel
version in a simple way, i.e., without checking somewhere which kernel
version the host that sent the message is using.
If this option is selected, then the "<release>," is prepended before the
netconsole message. This is an example of a netconsole output, with
release feature enabled:
6.4.0-01762-ga1ba2ffe946e;12,426,112883998,-;this is a test
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20230714111330.3069605-1-leitao@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
SM8250 (like SM8150 but unlike all other QUP-equipped SoCs) doesn't
provide a qup-core path. Adjust the bindings and drivers as necessary,
and then describe the icc paths in the device tree. This makes it possible
for interconnect sync_state succeed so long as you don't use UFS.
* icc-sm8250-qup
dt-bindings: interconnect: qcom,rpmh: Add SM8250 QUP virt
dt-bindings: interconnect: qcom,sm8250: Add QUP virt
interconnect: qcom: sm8250: Fix QUP0 nodes
Link: https://lore.kernel.org/r/20230703-topic-8250_qup_icc-v2-0-9ba0a9460be2@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The QUP0 BCM relates to some internal property of the QUPs, and should
be configured independently of the path to the QUP. In line with other
platforms expose QUP_CORE endpoints in order allow this configuration.
Fixes: 6df5b34949 ("interconnect: qcom: Add SM8250 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230703-topic-8250_qup_icc-v2-3-9ba0a9460be2@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
When exploiting memory vulnerabilities, "heap spraying" is a common
technique targeting those related to dynamic memory allocation (i.e. the
"heap"), and it plays an important role in a successful exploitation.
Basically, it is to overwrite the memory area of vulnerable object by
triggering allocation in other subsystems or modules and therefore
getting a reference to the targeted memory location. It's usable on
various types of vulnerablity including use after free (UAF), heap out-
of-bound write and etc.
There are (at least) two reasons why the heap can be sprayed: 1) generic
slab caches are shared among different subsystems and modules, and
2) dedicated slab caches could be merged with the generic ones.
Currently these two factors cannot be prevented at a low cost: the first
one is a widely used memory allocation mechanism, and shutting down slab
merging completely via `slub_nomerge` would be overkill.
To efficiently prevent heap spraying, we propose the following approach:
to create multiple copies of generic slab caches that will never be
merged, and random one of them will be used at allocation. The random
selection is based on the address of code that calls `kmalloc()`, which
means it is static at runtime (rather than dynamically determined at
each time of allocation, which could be bypassed by repeatedly spraying
in brute force). In other words, the randomness of cache selection will
be with respect to the code address rather than time, i.e. allocations
in different code paths would most likely pick different caches,
although kmalloc() at each place would use the same cache copy whenever
it is executed. In this way, the vulnerable object and memory allocated
in other subsystems and modules will (most probably) be on different
slab caches, which prevents the object from being sprayed.
Meanwhile, the static random selection is further enhanced with a
per-boot random seed, which prevents the attacker from finding a usable
kmalloc that happens to pick the same cache with the vulnerable
subsystem/module by analyzing the open source code. In other words, with
the per-boot seed, the random selection is static during each time the
system starts and runs, but not across different system startups.
The overhead of performance has been tested on a 40-core x86 server by
comparing the results of `perf bench all` between the kernels with and
without this patch based on the latest linux-next kernel, which shows
minor difference. A subset of benchmarks are listed below:
sched/ sched/ syscall/ mem/ mem/
messaging pipe basic memcpy memset
(sec) (sec) (sec) (GB/sec) (GB/sec)
control1 0.019 5.459 0.733 15.258789 51.398026
control2 0.019 5.439 0.730 16.009221 48.828125
control3 0.019 5.282 0.735 16.009221 48.828125
control_avg 0.019 5.393 0.733 15.759077 49.684759
experiment1 0.019 5.374 0.741 15.500992 46.502976
experiment2 0.019 5.440 0.746 16.276042 51.398026
experiment3 0.019 5.242 0.752 15.258789 51.398026
experiment_avg 0.019 5.352 0.746 15.678608 49.766343
The overhead of memory usage was measured by executing `free` after boot
on a QEMU VM with 1GB total memory, and as expected, it's positively
correlated with # of cache copies:
control 4 copies 8 copies 16 copies
total 969.8M 968.2M 968.2M 968.2M
used 20.0M 21.9M 24.1M 26.7M
free 936.9M 933.6M 931.4M 928.6M
available 932.2M 928.8M 926.6M 923.9M
Co-developed-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: GONG, Ruiqi <gongruiqi@huaweicloud.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: Dennis Zhou <dennis@kernel.org> # percpu
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Russell King says:
====================
Remove some unused phylink legacy
I believe we are now in a position where some of the legacy phylink code
can be removed!
I believe that all DSA drivers do not make use of any pre-March 2020
phylink behaviour - all drivers now seem to set legacy_pre_march2020 to
false, and the conditions that DSA sets it to true are no longer
satisifed by any driver.
Moreover, no one uses the .mac_an_restart() method, so this can also be
removed.
====================
Link: https://lore.kernel.org/r/ZLERQ2OBrv44Ppyc@shell.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The mac_an_restart() method is now completely unused, and has been
superseded by phylink_pcs support. Remove this method.
Since phylink_pcs_mac_an_restart() now only deals with the PCS, rename
the function to remove the _mac infix.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since DSA no longer marks anything as phylink-legacy, there is now no
need for DSA drivers to set this member to false. Remove all instances
of this.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
All drivers are now updated for the March 2020 changes, and no longer
make use of the mac_pcs_get_state() or mac_an_restart() operations,
which are now NULL across all DSA drivers. All DSA drivers don't look
at speed, duplex, pause or advertisement in their phylink_mac_config()
method either.
Remove support for these operations from DSA, and stop marking DSA as
a legacy driver by default.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Make use of of_get_ethdev_address() to support reading MAC address not
only from the usual DT nodes but also from an NVMEM provider (e.g. using
a dedicated area in an FRU EEPROM).
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Link: https://lore.kernel.org/r/20230713095743.30517-1-fercerpav@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Set VPU G2 clock to 300MHz like described in documentation.
This fixes pixels error occurring with large resolution ( >= 2560x1600)
HEVC test stream when using the postprocessor to produce NV12.
Fixes: 4ac7e4a812 ("arm64: dts: imx8mq: Enable both G1 and G2 VPU's with vpu-blk-ctrl")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is the same approach as being used within imx8mp-blk-ctrl. This fixes
the lockdep warning about 'possible recursive locking detected' with the
following (reduced) backtrace:
genpd_lock_mtx+0x14/0x1c
genpd_runtime_resume+0x108/0x308
__rpm_callback+0x44/0x19c
rpm_callback+0x64/0x70
rpm_resume+0x438/0x6d8
__pm_runtime_resume+0x54/0xb0
imx93_blk_ctrl_power_on+0x100/0x294
_genpd_power_on+0x8c/0x16c
genpd_power_on.part.0+0xa0/0x1a0
__genpd_dev_pm_attach+0x14c/0x2e4
genpd_dev_pm_attach+0x58/0x64
dev_pm_domain_attach+0x1c/0x2c
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The reg size of etm nodes is incorrectly set to 64k instead of 4k. This
leads to a crash when calling amba_read_periphid(). After corrected reg
size, amba_read_periphid() retrieve the correct periphid.
arm,primecell-periphid were removed from the etm nodes.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
For SOMs with an onboard PHY, the RESET_N pull-up resistor is
currently deactivated in the pinmux configuration. When the pinmux
code selects the GPIO function for this pin, with a default direction
of input, this prevents the RESET_N pin from being taken to the proper
3.3V level (deasserted), and this results in the PHY being not
detected since it is held in reset.
Taken from RESET_N pin description in ADIN13000 datasheet:
This pin requires a 1K pull-up resistor to AVDD_3P3.
Activate the pull-up resistor to fix the issue.
Fixes: ade0176dd8 ("arm64: dts: imx8mn-var-som: Add Variscite VAR-SOM-MX8MN System on Module")
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
When the RK3568 PCIe v3 PHY supported has been upstreamed, RK3588
support was included, but the DT binding does not reflect this.
This adds the missing bits.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20230717173512.65169-2-sebastian.reichel@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Two entries are expected for PCIe ranges.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The DTS code coding style expects exactly one space before and after '='
sign.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
DT bindings expect function in each pin state in the pin configuration:
sm8250-sony-xperia-edo-pdx203.dtb: pinctrl@f100000: cam-pwr-b-state: 'oneOf' conditional failed, one must be fixed:
'function' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230717210055.21979-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers. Since
commit c4a48b0df8 ("dt-bindings: pinctrl: qcom: tlmm should use
output-disable, not input-enable") the property is not accepted anymore:
sc8180x-primus.dtb: pinctrl@3100000: hall-int-active-state: 'oneOf' conditional failed, one must be fixed:
'bias-disable', 'function', 'input-enable', 'pins' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230717210055.21979-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
i.MX93 and i.MX8ULP lpuart add some new featurs based on i.MX7ULP, for
example, i.MX93 and i.MX8ULP can support EOP(end-of-packet) function
while i.MX7ULP doesn't support, so add "fsl,imx8ulp-lpuart" compatible
string for i.MX93 to support those new features.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Drop the i.MX8DXL backwards compatibility with i.MX7ULP since they
differ from clocks handling point of view.
dtbs_check has the following warnings:
linux-next/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: serial@5a060000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx8qxp-lpuart', 'fsl,imx7ulp-lpuart'] is too long
'fsl,imx93-lpuart' was expected
'fsl,imx8qxp-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart']
'fsl,imxrt1050-lpuart' was expected
'fsl,imx8ulp-lpuart' was expected
'fsl,imx8qxp-lpuart' was expected
'fsl,imxrt1170-lpuart' was expected
From schema: linux-next/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add reserved memory node for rpmsg
Enable CM33 node with mailbox property included for doorbell.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX8ULP relies remoteproc and rpmsg enabled to communicate with CM33
for boot purpose, because some boot related things are handled by
CM33.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
scl-gpios and sda-gpios need GPIO_OPEN_DRAIN flag, otherwise the
following run-time warning is seen:
gpio-144 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
gpio-146 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Kontron sl28 board is supported upstream and also tested in the
KernelCI. Enable support for its VPD EEPROM where the base ethernet
address is stored.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Now that it is finally possible to get the MAC addresses from the OTP
memory, use it to set the addresses of the network devices.
There are 8 reserved MAC addresses in total per board. Distribute them
as follows:
+----------+------+------+------+------+------+
| | var1 | var2 | var3 | var4 | kbox |
+----------+------+------+------+------+------+
| enetc #0 | +0 | | | +0 | +0 |
| enetc #1 | | | +0 | +1 | +1 |
| enetc #2 | | +2 | | | +2 |
| enetc #3 | | +3 | | | +3 |
| felix p0 | | +0 | | | +4 |
| felix p1 | | +1 | | | +5 |
| felix p2 | | | | | +6 |
| felix p3 | | | | | +7 |
| felix p4 | | | | | |
| felix p5 | | | | | |
+----------+------+------+------+------+------+
An empty cell means, the port is not available and thus doesn't need an
ethernet address.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Set Pull Resistors Enable bit to put signal into a defined state.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Cem Tenruh <c.tenruh@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add #address-cells and #size-cells properties to som_flash. This
enables correct parsing of added SPI NOR mtd partition child nodes that
are set in the bootloader.
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Cem Tenruh <c.tenruh@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Beacon Embedded imx8mm development kit has a DSI
to HDMI bridge chip. The bridge supports stereo audio
and hot-plugging.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The DSI to HDMI bridge uses the address currently assigned to
the camera, so change the camera address to the alternative
address of 0x10 in preparation to enable the bridge.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Beacon Embedded imx8mn development kit has a DSI
to HDMI bridge chip. The bridge supports stereo audio
and hot-plug detection.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
When the call to btrfs_extract_ordered_extent in btrfs_dio_submit_io
fails to allocate memory for a new ordered_extent, it calls into the
btrfs_dio_end_io for error handling. btrfs_dio_end_io then assumes that
bbio->ordered is set because it is supposed to be at this point, except
for this error handling corner case. Try to not overload the
btrfs_dio_end_io with error handling of a bio in a non-canonical state,
and instead call btrfs_finish_ordered_extent and iomap_dio_bio_end_io
directly for this error case.
Reported-by: syzbot <syzbot+5b82f0e951f8c2bcdb8f@syzkaller.appspotmail.com>
Fixes: b41b6f6937 ("btrfs: use btrfs_finish_ordered_extent to complete direct writes")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: syzbot <syzbot+5b82f0e951f8c2bcdb8f@syzkaller.appspotmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>