When some of the da9063 regulators do not have corresponding DT nodes
a null pointer dereference occurs on boot because such regulators have
no init_data causing the pointers calculated in
da9063_check_xvp_constraints() to be invalid.
Do not dereference them in this case.
Fixes: b8717a80e6 ("regulator: da9063: implement setter for voltage monitoring")
Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Link: https://lore.kernel.org/r/20230616143736.2946173-1-martin.fuzzey@flowbird.group
Signed-off-by: Mark Brown <broonie@kernel.org>
The SMBus I2C buses have limits on the size of transfers they can do but
do not factor in the register length meaning we may try to do a transfer
longer than our length limit, the core will not take care of this.
Future changes will factor this out into the core but there are a number
of users that assume current behaviour so let's just do something
conservative here.
This does not take account padding bits but practically speaking these
are very rarely if ever used on I2C buses given that they generally run
slowly enough to mean there's no issue.
Cc: stable@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20230712-regmap-max-transfer-v1-2-80e2aed22e83@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When problems were noticed with the register address not being taken
into account when limiting raw transfers with I2C devices we fixed this
in the core. Unfortunately it has subsequently been realised that a lot
of buses were relying on the prior behaviour, partly due to unclear
documentation not making it obvious what was intended in the core. This
is all more involved to fix than is sensible for a fix commit so let's
just drop the original fixes, a separate commit will fix the originally
observed problem in an I2C specific way
Fixes: 3981514180 ("regmap: Account for register length when chunking")
Fixes: c8e796895e ("regmap: spi-avmm: Fix regmap_bus max_raw_write")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230712-regmap-max-transfer-v1-1-80e2aed22e83@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This doesn't check how many bytes the simple_write_to_buffer() writes to
the buffer. The only thing that we know is that the first byte is
initialized and the last byte of the buffer is set to NUL. However
the middle bytes could be uninitialized.
There is no need to use simple_write_to_buffer(). This code does not
support partial writes but instead passes "pos = 0" as the starting
offset regardless of what the user passed as "*ppos". Just use the
copy_from_user() function and initialize the whole buffer.
Fixes: 671e0b9005 ("ASoC: SOF: Clone the trace code to ipc3-dtrace as fw_tracing implementation")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/74148292-ce4d-4e01-a1a7-921e6767da14@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
In commit 2cb1e0259f ("ASoC: cs42l51: re-hook of_match_table
pointer"), 9 years ago, some random guy fixed the cs42l51 after it was
split into a core part and an I2C part to properly match based on a
Device Tree compatible string.
However, the fix in this commit is wrong: the MODULE_DEVICE_TABLE(of,
....) is in the core part of the driver, not the I2C part. Therefore,
automatic module loading based on module.alias, based on matching with
the DT compatible string, loads the core part of the driver, but not
the I2C part. And threfore, the i2c_driver is not registered, and the
codec is not known to the system, nor matched with a DT node with the
corresponding compatible string.
In order to fix that, we move the MODULE_DEVICE_TABLE(of, ...) into
the I2C part of the driver. The cs42l51_of_match[] array is also moved
as well, as it is not possible to have this definition in one file,
and the MODULE_DEVICE_TABLE(of, ...) invocation in another file, due
to how MODULE_DEVICE_TABLE works.
Thanks to this commit, the I2C part of the driver now properly
autoloads, and thanks to its dependency on the core part, the core
part gets autoloaded as well, resulting in a functional sound card
without having to manually load kernel modules.
Fixes: 2cb1e0259f ("ASoC: cs42l51: re-hook of_match_table pointer")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Link: https://lore.kernel.org/r/20230713112112.778576-1-thomas.petazzoni@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230711143145.1192651-1-u.kleine-koenig@pengutronix.de
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmS0at0eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG6m8H/RZCd2DWeM94CgK5
DIxNLxu90PrEcrOnqeHFJtQoSiUQTHeseh9E4BH0JdPDxtlU89VwYRAevseWiVkp
JyyJPB40UR4i2DO0P1+oWBBsGEG+bo8lZ1M+uxU5k6lgC0fAi96/O48mwwmI0Mtm
P6BkWd3IkSXc7l4AGIrKa5P+pYEnm0Z6YAZILfdMVBcLXZWv1OAwEEkZNdUuhE3d
5DxlQ8MLzlQIbe+LasiwdL9r606acFaJG9Hewl9x5DBlsObZ3d2rX4vEt1NEVh89
shV29xm2AjCpLh4kstJFdTDCkDw/4H7TcFB/NMxXyzEXp3Bx8YXq+mjVd2mpq1FI
hHtCsOA=
=KiaU
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmS0zgsACgkQJNaLcl1U
h9C8Zwf9HZwtLMlojz17PYAkErGIwAGzwH8jsBmWnOwMuifQi8ofpFLv0gFz17k0
P3bIyXBc4JV3I0+A+b5+sv+BOtaUk9pWSoLIn5SAEK0ydfqpWhkKou2eoMmGt/UW
Zv6WSCfgN7K2XiXIuvUBjyr4F57m+GMb5/UIPDv01TPrOb+Usz6kmZwgtRqpOTE4
ozDNUwNtx074h7ZHNx/taP7i2bt9pD+KnY6KgJ/6S9QtCE7+SCuDGIV35YFJx/8R
b+hrmm40ES7GP/qYXZ+OF+iBAm7svs6nSKbkSmKxZZDHc9i4GkOOt8yI3TvF2GPf
uTFjjLNuZEHat5ksZfFCbdEAlYR0sQ==
=x+J9
-----END PGP SIGNATURE-----
ASoC: Merge v6.5-rc2
Get a similar baseline to my other branches, and fixes for people using
the branch.
Driver unload hits a hang during stress testing of load/unload.
stack trace snippet -
tasklet_kill at ffffffff9aabb8b2
bnxt_qplib_nq_stop_irq at ffffffffc0a805fb [bnxt_re]
bnxt_qplib_disable_nq at ffffffffc0a80c5b [bnxt_re]
bnxt_re_dev_uninit at ffffffffc0a67d15 [bnxt_re]
bnxt_re_remove_device at ffffffffc0a6af1d [bnxt_re]
tasklet_kill can hang if the tasklet is scheduled after it is disabled.
Modified the sequences to disable the interrupt first and synchronize
irq before disabling the tasklet.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1689322969-25402-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
HW may generate completions that indicates QP is destroyed.
Driver should not be scheduling any more completion handlers
for this QP, after the QP is destroyed. Since CQs are active
during the QP destroy, driver may still schedule completion
handlers. This can cause a race where the destroy_cq and poll_cq
running simultaneously.
Snippet of kernel panic while doing bnxt_re driver load unload in loop.
This indicates a poll after the CQ is freed.
[77786.481636] Call Trace:
[77786.481640] <TASK>
[77786.481644] bnxt_re_poll_cq+0x14a/0x620 [bnxt_re]
[77786.481658] ? kvm_clock_read+0x14/0x30
[77786.481693] __ib_process_cq+0x57/0x190 [ib_core]
[77786.481728] ib_cq_poll_work+0x26/0x80 [ib_core]
[77786.481761] process_one_work+0x1e5/0x3f0
[77786.481768] worker_thread+0x50/0x3a0
[77786.481785] ? __pfx_worker_thread+0x10/0x10
[77786.481790] kthread+0xe2/0x110
[77786.481794] ? __pfx_kthread+0x10/0x10
[77786.481797] ret_from_fork+0x2c/0x50
To avoid this, complete all completion handlers before returning the
destroy QP. If free_cq is called soon after destroy_qp, IB stack
will cancel the CQ work before invoking the destroy_cq verb and
this will prevent any race mentioned.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1689322969-25402-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Commit 21c2fe94ab ("RDMA/mthca: Combine special QP struct with mthca QP")
introduced a new struct mthca_sqp which doesn't contain struct mthca_qp
any longer. Placing a pointer of this new struct into qptable leads
to crashes, because mthca_poll_one() expects a qp pointer. Fix this
by putting the correct pointer into qptable.
Fixes: 21c2fe94ab ("RDMA/mthca: Combine special QP struct with mthca QP")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Link: https://lore.kernel.org/r/20230713141658.9426-1-tbogendoerfer@suse.de
Signed-off-by: Leon Romanovsky <leon@kernel.org>
8d037973d4 ("RDMA/core: Refactor rdma_bind_addr") intoduces as regression
on irdma devices on certain tests which uses rdma CM, such as cmtime.
No connections can be established with the MAD QP experiences a fatal
error on the active side.
The cma destination address is not updated with the dst_addr when ULP
on active side calls rdma_bind_addr followed by rdma_resolve_addr.
The id_priv state is 'bound' in resolve_prepare_src and update is skipped.
This leaves the dgid passed into irdma driver to create an Address Handle
(AH) for the MAD QP at 0. The create AH descriptor as well as the ARP cache
entry is invalid and HW throws an asynchronous events as result.
[ 1207.656888] resolve_prepare_src caller: ucma_resolve_addr+0xff/0x170 [rdma_ucm] daddr=200.0.4.28 id_priv->state=7
[....]
[ 1207.680362] ice 0000:07:00.1 rocep7s0f1: caller: irdma_create_ah+0x3e/0x70 [irdma] ah_id=0 arp_idx=0 dest_ip=0.0.0.0
destMAC=00:00:64:ca:b7:52 ipvalid=1 raw=0000:0000:0000:0000:0000:ffff:0000:0000
[ 1207.682077] ice 0000:07:00.1 rocep7s0f1: abnormal ae_id = 0x401 bool qp=1 qp_id = 1, ae_src=5
[ 1207.691657] infiniband rocep7s0f1: Fatal error (1) on MAD QP (1)
Fix this by updating the CMA destination address when the ULP calls
a resolve address with the CM state already bound.
Fixes: 8d037973d4 ("RDMA/core: Refactor rdma_bind_addr")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230712234133.1343-1-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
CQP completion statistics is read lockesly in irdma_wait_event and
irdma_check_cqp_progress while it can be updated in the completion
thread irdma_sc_ccq_get_cqe_info on another CPU as KCSAN reports.
Make completion statistics an atomic variable to reflect coherent updates
to it. This will also avoid load/store tearing logic bug potentially
possible by compiler optimizations.
[77346.170861] BUG: KCSAN: data-race in irdma_handle_cqp_op [irdma] / irdma_sc_ccq_get_cqe_info [irdma]
[77346.171383] write to 0xffff8a3250b108e0 of 8 bytes by task 9544 on cpu 4:
[77346.171483] irdma_sc_ccq_get_cqe_info+0x27a/0x370 [irdma]
[77346.171658] irdma_cqp_ce_handler+0x164/0x270 [irdma]
[77346.171835] cqp_compl_worker+0x1b/0x20 [irdma]
[77346.172009] process_one_work+0x4d1/0xa40
[77346.172024] worker_thread+0x319/0x700
[77346.172037] kthread+0x180/0x1b0
[77346.172054] ret_from_fork+0x22/0x30
[77346.172136] read to 0xffff8a3250b108e0 of 8 bytes by task 9838 on cpu 2:
[77346.172234] irdma_handle_cqp_op+0xf4/0x4b0 [irdma]
[77346.172413] irdma_cqp_aeq_cmd+0x75/0xa0 [irdma]
[77346.172592] irdma_create_aeq+0x390/0x45a [irdma]
[77346.172769] irdma_rt_init_hw.cold+0x212/0x85d [irdma]
[77346.172944] irdma_probe+0x54f/0x620 [irdma]
[77346.173122] auxiliary_bus_probe+0x66/0xa0
[77346.173137] really_probe+0x140/0x540
[77346.173154] __driver_probe_device+0xc7/0x220
[77346.173173] driver_probe_device+0x5f/0x140
[77346.173190] __driver_attach+0xf0/0x2c0
[77346.173208] bus_for_each_dev+0xa8/0xf0
[77346.173225] driver_attach+0x29/0x30
[77346.173240] bus_add_driver+0x29c/0x2f0
[77346.173255] driver_register+0x10f/0x1a0
[77346.173272] __auxiliary_driver_register+0xbc/0x140
[77346.173287] irdma_init_module+0x55/0x1000 [irdma]
[77346.173460] do_one_initcall+0x7d/0x410
[77346.173475] do_init_module+0x81/0x2c0
[77346.173491] load_module+0x1232/0x12c0
[77346.173506] __do_sys_finit_module+0x101/0x180
[77346.173522] __x64_sys_finit_module+0x3c/0x50
[77346.173538] do_syscall_64+0x39/0x90
[77346.173553] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[77346.173634] value changed: 0x0000000000000094 -> 0x0000000000000095
Fixes: 915cc7ac0f ("RDMA/irdma: Add miscellaneous utility definitions")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230711175253.1289-3-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
On code inspection, there are many instances in the driver where
CEQE and AEQE fields written to by HW are read without guaranteeing
that the polarity bit has been read and checked first.
Add a read barrier to avoid reordering of loads on the CEQE/AEQE fields
prior to checking the polarity bit.
Fixes: 3f49d68425 ("RDMA/irdma: Implement HW Admin Queue OPs")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230711175253.1289-2-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
aesp10-ppc.S and ghashp10-ppc.S are autogenerated and not tracked by
git, so they should be ignored. This is doing the same as the P8 files
in drivers/crypto/vmx/.gitignore but for the P10 files in
arch/powerpc/crypto.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230713042206.85669-1-ruscur@russell.cc
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20230714174449.4055156-1-robh@kernel.org
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Fix typo in imx8mm-venice-gw72xx-0x-imx219 overlay causing it to use
gw73xx configuration.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Update the imx8mp-venice-gw74xx for revB:
- add CAN1
- add TIS-TPM on SPI2
- add FAN controller
- fix PMIC I2C bus (revA PMIC I2C was non-functional so no need for
backward compatible option)
- M2 socket GPIO's moved
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This partly reverts commit 1e688dd2a3.
That commit aimed at optimising the code around generation of
WARN_ON/BUG_ON but this leads to a lot of dead code erroneously
generated by GCC.
That dead code becomes a problem when we start using objtool validation
because objtool will abort validation with a warning as soon as it
detects unreachable code. This is because unreachable code might
be the indication that objtool doesn't properly decode object text.
text data bss dec hex filename
9551585 3627834 224376 13403795 cc8693 vmlinux.before
9535281 3628358 224376 13388015 cc48ef vmlinux.after
Once this change is reverted, in a standard configuration (pmac32 +
function tracer) the text is reduced by 16k which is around 1.7%
We already had problem with it when starting to use objtool on powerpc
as a replacement for recordmcount, see commit 93e3f45a26 ("powerpc:
Fix __WARN_FLAGS() for use with Objtool")
There is also a problem with at least GCC 12, on ppc64_defconfig +
CONFIG_CC_OPTIMIZE_FOR_SIZE=y + CONFIG_DEBUG_SECTION_MISMATCH=y :
LD .tmp_vmlinux.kallsyms1
powerpc64-linux-ld: net/ipv4/tcp_input.o:(__ex_table+0xc4): undefined reference to `.L2136'
make[2]: *** [scripts/Makefile.vmlinux:36: vmlinux] Error 1
make[1]: *** [/home/chleroy/linux-powerpc/Makefile:1238: vmlinux] Error 2
Taking into account that other problems are encountered with that
'asm goto' in WARN_ON(), including build failures, keeping that
change is not worth it allthough it is primarily a compiler bug.
Revert it for now.
mpe: Retain EMIT_WARN_ENTRY as a synonym for EMIT_BUG_ENTRY to reduce
churn, as there are now nearly as many uses of EMIT_WARN_ENTRY as
EMIT_BUG_ENTRY.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230712134552.534955-1-mpe@ellerman.id.au
Commit 8ef7b9e176 ("powerpc/pseries/vas: Close windows with DLPAR
core removal") unmaps the window paste address and issues HCALL to
close window in the hypervisor for migration or DLPAR core removal
events. So holds mmap_mutex and then mmap lock before unmap the
paste address. But if the user space issue mmap paste address at
the same time with the migration event, coproc_mmap() is called
after holding the mmap lock which can trigger deadlock when trying
to acquire mmap_mutex in coproc_mmap().
t1: mmap() call to mmap t2: Migration event
window paste address
do_mmap2() migration_store()
ksys_mmap_pgoff() pseries_migrate_partition()
vm_mmap_pgoff() vas_migration_handler()
Acquire mmap lock reconfig_close_windows()
do_mmap() lock mmap_mutex
mmap_region() Acquire mmap lock
call_mmap() //Wait for mmap lock
coproc_mmap() unmap vma
lock mmap_mutex update window status
//wait for mmap_mutex Release mmap lock
mmap vma unlock mmap_mutex
update window status
unlock mmap_mutex
...
Release mmap lock
Fix this deadlock issue by holding mmap lock first before mmap_mutex
in reconfig_close_windows().
Fixes: 8ef7b9e176 ("powerpc/pseries/vas: Close windows with DLPAR core removal")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230716100506.7833-1-haren@linux.ibm.com
The GW7904 does not connect the VDD_MIPI power rails thus MIPI is
disabled. However we must also disable disp_blk_ctrl as it uses the
pgc_mipi power domain and without it being disabled imx8m-blk-ctrl will
fail to probe:
imx8m-blk-ctrl 32e28000.blk-ctrl: error -ETIMEDOUT: failed to attach
power domain "mipi-dsi"
imx8m-blk-ctrl: probe of 32e28000.blk-ctrl failed with error -110
Fixes: b999bdaf05 ("arm64: dts: imx: Add i.mx8mm Gateworks gw7904 dts support")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The GW7903 does not connect the VDD_MIPI power rails thus MIPI is
disabled. However we must also disable disp_blk_ctrl as it uses the
pgc_mipi power domain and without it being disabled imx8m-blk-ctrl will
fail to probe:
imx8m-blk-ctrl 32e28000.blk-ctrl: error -ETIMEDOUT: failed to attach power domain "mipi-dsi"
imx8m-blk-ctrl: probe of 32e28000.blk-ctrl failed with error -110
Fixes: a72ba91e5b ("arm64: dts: imx: Add i.mx8mm Gateworks gw7903 dts support")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
On the GW7904 uart1 can use UART3_TX/RX for hardware flow control
which was the desired default configuration. Remove uart3 and configure
uart1 for hardware flow control.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The GW7902 has a Murata LBEE5H 802.11abgnac / BT5 module based on the
Cypress CYW43455 which supports SDR50/SDR104.
Add dt pinctrl for the 100mhz and 200mhz states to support SDR50/SDR104.
While at it add the dt node for the CYW43455 wifi.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The GW7901 has a Murata LBEE5H 802.11abgnac / BT5 module based on the
Cypress CYW43455 which supports SDR50/SDR104.
Add dt pinctrl for the 100mhz and 200mhz states to support SDR50/SDR104.
While at it add the dt node for the CYW43455 wifi for the brcmfmac
driver.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add regulator config for cpu-supply in order to support cpufreq.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
'power-supply' is an invalid property for usdhc and it gives
the following schema warning:
imx8mq-librem5-r2.dtb: mmc@30b40000: Unevaluated properties are not allowed ('power-supply' was unexpected)
From schema: Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
Change it to 'vqmmc-supply', which represents the supply for the bus IO.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Most of the protocol modules for the pata_parport driver are missing a
module description, causing warnings such as:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/ata/pata_parport/aten.o
when compiling with W=1. Add the missing MODULE_DESCRIPTION()
definitions to avoid these warnings. While at it, also add the missing
MODULE_AUTHOR() definitions.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230704124742.9596-4-frank.li@vivo.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230704124742.9596-2-frank.li@vivo.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230704124742.9596-1-frank.li@vivo.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add support for the pmx75 GPIO support to the Qualcomm PMIC GPIO
binding.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1688707209-30151-3-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add support for the pm7550ba GPIO support to the Qualcomm PMIC GPIO
binding.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1688707209-30151-2-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
group exists yet but the code still goes and iterates over event
siblings
-----BEGIN PGP SIGNATURE-----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=KqCi
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- Fix a lockdep warning when the event given is the first one, no event
group exists yet but the code still goes and iterates over event
siblings
* tag 'perf_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix lockdep warning in for_each_sibling_event() on SPR
doing an inter-procedural optimization and confuse objtool
- Initialize struct elf fully to avoid build failures
-----BEGIN PGP SIGNATURE-----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=fq/x
-----END PGP SIGNATURE-----
Merge tag 'objtool_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Mark copy_iovec_from_user() __noclone in order to prevent gcc from
doing an inter-procedural optimization and confuse objtool
- Initialize struct elf fully to avoid build failures
* tag 'objtool_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
iov_iter: Mark copy_iovec_from_user() noclone
objtool: initialize all of struct elf
- Fix the idle sibling selection
-----BEGIN PGP SIGNATURE-----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=bSNb
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Remove a cgroup from under a polling process properly
- Fix the idle sibling selection
* tag 'sched_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/psi: use kernfs polling functions for PSI trigger polling
sched/fair: Use recent_used_cpu to test p->cpus_ptr
- Fix a really annoying interrupt storm in the AMD driver
affecting Asus TUF gaming notebooks.
- Fix device tree parsing in the Renesas driver.
-----BEGIN PGP SIGNATURE-----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=LMMZ
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"I'm mostly on vacation but what would vacation be without a few
critical fixes so people can use their gaming laptops when hiding away
from the sun (or rain)?
- Fix a really annoying interrupt storm in the AMD driver affecting
Asus TUF gaming notebooks
- Fix device tree parsing in the Renesas driver"
* tag 'pinctrl-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: amd: Unify debounce handling into amd_pinconf_set()
pinctrl: amd: Drop pull up select configuration
pinctrl: amd: Use amd_pinconf_set() for all config options
pinctrl: amd: Only use special debounce behavior for GPIO 0
pinctrl: renesas: rzg2l: Handle non-unique subnode names
pinctrl: renesas: rzv2m: Handle non-unique subnode names
-----BEGIN PGP SIGNATURE-----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=kcX/
-----END PGP SIGNATURE-----
Merge tag '6.5-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Two reconnect fixes: important fix to address inFlight count to leak
(which can leak credits), and fix for better handling a deleted share
- DFS fix
- SMB1 cleanup fix
- deferred close fix
* tag '6.5-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix mid leak during reconnection after timeout threshold
cifs: is_network_name_deleted should return a bool
smb: client: fix missed ses refcounting
smb: client: Fix -Wstringop-overflow issues
cifs: if deferred close is disabled then close files immediately
- Fix Speculation_Store_Bypass reporting in /proc/self/status on Power10.
- Fix HPT with 4K pages since recent changes by implementing pmd_same().
- Fix 64-bit native_hpte_remove() to be irq-safe.
Thanks to: Aneesh Kumar K.V, Nageswara R Sastry, Russell Currey.
-----BEGIN PGP SIGNATURE-----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=q5Nn
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix Speculation_Store_Bypass reporting in /proc/self/status on
Power10
- Fix HPT with 4K pages since recent changes by implementing pmd_same()
- Fix 64-bit native_hpte_remove() to be irq-safe
Thanks to Aneesh Kumar K.V, Nageswara R Sastry, and Russell Currey.
* tag 'powerpc-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm/book3s64/hash/4k: Add pmd_same callback for 4K page size
powerpc/64e: Fix obtool warnings in exceptions-64e.S
powerpc/security: Fix Speculation_Store_Bypass reporting on Power10
powerpc/64s: Fix native_hpte_remove() to be irq-safe
- fprobe: Add a comment why fprobe will be skipped if another kprobe is
running in fprobe_kprobe_handler().
- probe-events: Fix some issues related to fetch-argument
. Fix double counting of the string length for user-string and symstr.
This will require longer buffer in the array case.
. Fix not to count error code (minus value) for the total used length
in array argument. This makes the total used length shorter.
. Fix to update dynamic used data size counter only if fetcharg uses
the dynamic size data. This may mis-count the used dynamic data
size and corrupt data.
. Revert "tracing: Add "(fault)" name injection to kernel probes"
because that did not work correctly with a bug, and we agreed the
current '(fault)' output (instead of '"(fault)"' like a string)
explains what happened more clearly.
. Fix to record 0-length (means fault access) data_loc data in fetch
function itself, instead of store_trace_args(). If we record an
array of string, this will fix to save fault access data on each
entry of the array correctly.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmSxSlYACgkQ2/sHvwUr
PxupyAgApFDi9YGsmrVbXmIN5y+yGMyio2H6xR7XkX+L02nvDY6uVqL/jgT8pHfI
AeGZEA+EqwxIfWpYBfztsFej+Gl3Elfvu14OSxwaafUlW3mgZFQqw1ZR0HvzXoKJ
8Iw6WOXjhLe3/QLy43UY8JQGOKI07i3gh71wa0W0huOyiwwHuuVwPSY9QJJ2ulSg
OWFSuMFO8IxYimp0BpFu/vrfa8CdgWLc24tgJ5EpZtzu6L0A2I/FMZjnBukxnP9s
rjAXv0uRuSFvvF7/RGCqrLza12525qyHx7d5IWUq5shd3bCnaUOnAieF//MoJaR3
q8McDJK//EPbUvCWgESuuyPS05smyQ==
=iumA
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probe fixes from Masami Hiramatsu:
- fprobe: Add a comment why fprobe will be skipped if another kprobe is
running in fprobe_kprobe_handler().
- probe-events: Fix some issues related to fetch-arguments:
- Fix double counting of the string length for user-string and
symstr. This will require longer buffer in the array case.
- Fix not to count error code (minus value) for the total used
length in array argument. This makes the total used length
shorter.
- Fix to update dynamic used data size counter only if fetcharg uses
the dynamic size data. This may mis-count the used dynamic data
size and corrupt data.
- Revert "tracing: Add "(fault)" name injection to kernel probes"
because that did not work correctly with a bug, and we agreed the
current '(fault)' output (instead of '"(fault)"' like a string)
explains what happened more clearly.
- Fix to record 0-length (means fault access) data_loc data in fetch
function itself, instead of store_trace_args(). If we record an
array of string, this will fix to save fault access data on each
entry of the array correctly.
* tag 'probes-fixes-v6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Fix to record 0-length data_loc in fetch_store_string*() if fails
Revert "tracing: Add "(fault)" name injection to kernel probes"
tracing/probes: Fix to update dynamic data counter if fetcharg uses it
tracing/probes: Fix not to count error code to total length
tracing/probes: Fix to avoid double count of the string length on the array
fprobes: Add a comment why fprobe_kprobe_handler exits if kprobe is running
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714174638.4058268-1-robh@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>