Implement ethtool_ops get_wol and set_wol.
Implement Wake-on-LAN support.
Wol requires hardware board support which use sub id
to identify.
Magic packets are checked by fw, for now just support
WAKE_MAGIC.
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the call to of_get_ethdev_address to mtk_add_mac which is part of
the probe function and can hence itself return -EPROBE_DEFER should
of_get_ethdev_address return -EPROBE_DEFER. This allows us to entirely
get rid of the mtk_init function.
The problem of of_get_ethdev_address returning -EPROBE_DEFER surfaced
in situations in which the NVMEM provider holding the MAC address has
not yet be loaded at the time mtk_eth_soc is initially probed. In this
case probing of mtk_eth_soc should be deferred instead of falling back
to use a random MAC address, so once the NVMEM provider becomes
available probing can be repeated.
Fixes: 656e705243 ("net-next: mediatek: add support for MT7623 ethernet")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We now have a regmap cache which uses a maple tree to store the register
state, this is a more modern data structure and the regmap level code
using it makes a number of assumptions better tuned for modern hardware
than those made by the rbtree cache type that the at9331 driver uses.
Switch the ar9331 driver to use the more modern data structure.
This should have minimal practical impact, it's mainly code
modernisation.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we create an L2 loop on a bridge in netns, we will see packets storm
even if STP is enabled.
# unshare -n
# ip link add br0 type bridge
# ip link add veth0 type veth peer name veth1
# ip link set veth0 master br0 up
# ip link set veth1 master br0 up
# ip link set br0 type bridge stp_state 1
# ip link set br0 up
# sleep 30
# ip -s link show br0
2: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether b6:61:98:1c:1c:b5 brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped missed mcast
956553768 12861249 0 0 0 12861249 <-. Keep
TX: bytes packets errors dropped carrier collsns | increasing
1027834 11951 0 0 0 0 <-' rapidly
This is because llc_rcv() drops all packets in non-root netns and BPDU
is dropped.
Let's add extack warning when enabling STP in netns.
# unshare -n
# ip link add br0 type bridge
# ip link set br0 type bridge stp_state 1
Warning: bridge: STP does not work in non-root netns.
Note this commit will be reverted later when we namespacify the whole LLC
infra.
Fixes: e730c15519 ("[NET]: Make packet reception network namespace safe")
Suggested-by: Harry Coin <hcoin@quietfountain.com>
Link: https://lore.kernel.org/netdev/0f531295-e289-022d-5add-5ceffa0df9bc@quietfountain.com/
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
CPSW ALE has 75 bit ALE entries which are stored within three 32 bit words.
The cpsw_ale_get_field() and cpsw_ale_set_field() functions assume that the
field will be strictly contained within one word. However, this is not
guaranteed to be the case and it is possible for ALE field entries to span
across up to two words at the most.
Fix the methods to handle getting/setting fields spanning up to two words.
Fixes: db82173f23 ("netdev: driver: ethernet: add cpsw address lookup engine support")
Signed-off-by: Tanmay Patil <t-patil@ti.com>
[s-vadapalli@ti.com: rephrased commit message and added Fixes tag]
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The at9331 is only able to read or write a single register at once. The
driver has a custom regmap bus and chooses to tell the regmap core about
this by reporting the maximum transfer sizes rather than the explicit
flags that exist at the regmap level. Since there are a number of
problems with the raw transfer limits and the regmap level flags are
better integrated anyway convert the driver to use the flags.
No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault says:
====================
net: Mark the sk parameter of routing functions as 'const'.
The sk_getsecid security hook prevents the use of a const sk pointer in
several routing functions. Since this hook should only read sk data,
make its sk argument const (patch 1), then constify the sk parameter of
various routing functions (patches 2-4).
Build-tested with make allmodconfig.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Make it explicit that this function doesn't modify the socket passed as
parameter.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
icmpv6_flow_init(), ip6_datagram_flow_key_init() and ip6_mc_hdr() don't
need to modify their sk argument. Make that explicit using const.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
These functions don't need to modify the socket, so let's allow the
callers to pass a const struct sock *.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sk_getsecid hook shouldn't need to modify its socket argument.
Make it const so that callers of security_sk_classify_flow() can use a
const struct sock *.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Supports MMIO regmaps to access controller registers in Meson IR driver.
Signed-off-by: Zelong Dong <zelong.dong@amlogic.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
There are more registers to come in the next Meson IR Controller.
For defining clearly, rename register macros.
Signed-off-by: Zelong Dong <zelong.dong@amlogic.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
There are more registers to come in the next Meson IR Controller.
For defining clearly, sort register macros and let address and bit
macros as a set.
Signed-off-by: Zelong Dong <zelong.dong@amlogic.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The register abstraction has wrappers around both the normal writel()
and its writel_relaxed() counterpart, but this has led to a lot of users
ending up with the relaxed version.
There is sometimes a need to intentionally pick the relaxed accessor for
performance critical functions, but I noticed that each hantro_reg_write()
call also contains a non-relaxed readl(), which is typically much more
expensive than a writel, so there is little benefit here but an added
risk of missing a serialization against DMA.
To make this behave like other interfaces, use the normal accessor by
default and only provide the relaxed version as an alternative for
performance critical code. hantro_postproc.c is the only place that
used both the relaxed and normal writel, but this does not seem
cricital either, so change it all to the normal ones.
[hverkuil: fix function prototype alignment]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In some configurations, gcc decides not to inline the register accessor
functions, which in turn leads to lots of temporary hantro_reg structures
on the stack that cannot be eliminated because they escape into an
uninlined function:
drivers/media/platform/verisilicon/rockchip_vpu981_hw_av1_dec.c:1022:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=]
Mark all of these as __always_inline so the compiler is able to completely
eliminate the temporary structures instead, which brings the stack usage
back down to just the normal local variables.
Closes: https://lore.kernel.org/oe-kbuild-all/202306151506.goHEegOd-lkp@intel.com/
[hverkuil: fix function prototype alignment, wrap commit log]
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 727a400686 ("media: verisilicon: Add Rockchip AV1 decoder")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Will cause below warning then reboot when exercising the decoder with
fluster on mt8192-asurada-spherion.
This deinit function is called on the v4l2 release callback, even though
the work might not have been initialized as that only happens if/when the
codec specific 'decode' callback is called (as a result of device_run m2m
callback).
CPU: 5 PID: 2338 Comm: gst-launch-1.0 Tainted: G W 6.4.0-rc5-next-20230607+ #475
Hardware name: Google Spherion (rev0 - 3) (DT)
pstate: 00400009 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __flush_work.isra.0+0x23c/0x258
lr : __cancel_work_timer+0x14c/0x1c8
sp : ffff8000896e3b00
x29: ffff8000896e3b00 x28: ffff57c3d4079f80 x27: 0000000000000000
x26: ffff57c3d4079f80 x25: ffffb76395b59dc8 x24: 0000000000000001
x23: ffffb763928daab8 x22: ffff57c3d4079f80 x21: 0000000000000000
x20: ffffb763955f6778 x19: ffff57c3cf06f4a0 x18: 0000000000000000
x17: 000000040044ffff x16: 005000f2b5503510 x15: 0000000000000000
x14: ffff57c3c03a1f80 x13: ffffa0616a2fc000 x12: 000000003464d91d
x11: 0000000000000000 x10: 0000000000001b10 x9 : ffffb763928de61c
x8 : ffff57c3d407baf0 x7 : 0000000000000000 x6 : ffff57c3d4079f80
x5 : ffff57c3d4079f80 x4 : 0000000000000000 x3 : 0000000000000000
x2 : ffff8000896e3bf0 x1 : 0000000000000011 x0 : 0000000000000000
Call trace:
__flush_work.isra.0+0x23c/0x258
__cancel_work_timer+0x14c/0x1c8
cancel_work_sync+0x1c/0x30
vdec_msg_queue_deinit+0xac/0xc8
vdec_h264_slice_deinit+0x64/0xb8
vdec_if_deinit+0x3c/0x68
mtk_vcodec_dec_release+0x20/0x40
fops_vcodec_release+0x50/0xd8
v4l2_release+0x7c/0x100
__fput+0x80/0x270
____fput+0x18/0x30
task_work_run+0x78/0xe0
do_notify_resume+0x29c/0x7f8
el0_svc+0xa4/0xb8
el0t_64_sync_handler+0xc0/0xc8
el0t_64_sync+0x1a8/0x1b0
---[ end trace 0000000000000000 ]---
Fixes: 297160d411 ("media: mediatek: vcodec: move core context from device to each instance")
Reported-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
After having been assigned to NULL value at cx23885-dvb.c:1202,
pointer '0' is dereferenced at cx23885-dvb.c:2469.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Nikolay Burykin <burikin@ivk.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Handle (and warn about) possible error waiting for MSGCODE_PING result.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The mtk8195_jpegenc_drvdata object was added outside of an #ifdef causing
a harmless build warning.
drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c:1879:32: error: 'mtk8195_jpegenc_drvdata' defined but not used [-Werror=unused-variable]
1879 | static struct mtk_jpeg_variant mtk8195_jpegenc_drvdata = {
| ^~~~~~~~~~~~~~~~~~~~~~~
A follow-up patch moved it inside of an #ifdef, which caused more
warnings, and a third patch ended up adding even more #ifdefs. These
were all bogus, since the actual problem here is the incorrect use
of of_ptr(). Since the driver (like any other modern platform driver)
only works in combination with CONFIG_OF, there is no point in hiding
the reference, so just remove that along with all the pointless #ifdef
checks in the driver.
This improves build coverage and avoids running into the same problem
again when another part of the driver gets changed that relies on
the #ifdef blocks to be completely matched.
Fixes: 934e8bccac ("mtk-jpegenc: support jpegenc multi-hardware")
Fixes: 4ae47770d5 ("media: mtk-jpegenc: Fix a compilation issue")
Fixes: da4ede4b7f ("media: mtk-jpeg: move data/code inside CONFIG_OF blocks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
imx jpeg encoder and decoder support 4 slots each,
aim to support some virtualization scenarios.
driver should only enable one slot one time.
but due to some hardware issue,
only slot 0 can be enabled in imx8q platform,
and they may be fixed in imx9 platform.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The path did not match the one it was submitted into linux-firmware
which prevented generic distribution from having working CODEC.
Fixes: 9f599f351e ("media: amphion: add vpu core driver")
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This simplifies the code and silences -517 error messages. Also
the reason is listed in /sys/kernel/debug/devices_deferred.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: ming_qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Select V4L2_FWNODE as the driver depends on it.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: aa31f65140 ("media: atomisp: allow building the driver again")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Address these compiler warnings by initialising the m_best and p_best
values to 0 and 1 respectively (as latter is used as a divisor):
drivers/media/i2c/tc358746.c: In function 'tc358746_find_pll_settings':
>> drivers/media/i2c/tc358746.c:817:13: warning: 'p_best' is used uninitialized
[-Wuninitialized]
817 | u16 p_best, p;
| ^~~~~~
>> drivers/media/i2c/tc358746.c:816:13: warning: 'm_best' is used uninitialized
[-Wuninitialized]
816 | u16 m_best, mul;
| ^~~~~~
The warnings may well be a false positive but it is difficult for a
compiler to find out whether that truly is the case.
Closes: https://lore.kernel.org/oe-kbuild-all/202305301627.fLT3Bkds-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 80a21da360 ("media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Decrease the buffer filling overhead with conditional remainder
calculation in the 'inc_buf_pos' inline function.
Fix the driver to use already defined variables where it is possible
in 'check_buf_block_ni' and 'fill_block_pattern_n' functions.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230713075953.13692-2-ivan.orlov0322@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Extend 'pcmtest' virtual driver with 'open' callback error injection
functionality, as it already can inject errors into other PCM callbacks.
Add module parameter which enables EBUSY error injection in the 'open'
PCM callback.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230713075953.13692-1-ivan.orlov0322@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This was the ALC283 depop procedure.
Maybe this procedure wasn't suitable with new codec.
So, let us remove it. But HP 15z-fc000 must do 3k pull low. If it
reboot with plugged headset,
it will have errors show don't find codec error messages. Run 3k pull
low will solve issues.
So, let AMD chipset will run this for workarround.
Fixes: 5aec989130 ("ALSA: hda/realtek - ALC236 headset MIC recording issue")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Reported-by: Joseph C. Sible <josephcsible@gmail.com>
Closes: https://lore.kernel.org/r/CABpewhE4REgn9RJZduuEU6Z_ijXNeQWnrxO1tg70Gkw=F8qNYg@mail.gmail.com/
Link: https://lore.kernel.org/r/4678992299664babac4403d9978e7ba7@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a follow up on a previous patch[1] fixing the aliases for
sdm845 devices, fix them here too.
[1]: 4772c03002 ("arm64: dts: qcom: sdm845-*: fix uart6 aliases")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20230627-c630-uart-and-1p2-reg-v2-3-496b581935c1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The VCC and VCCA supplies of the DSI<->eDP bridge are derived from
vreg_l2a_1p2 and controlled by a GPIO on the PMIC. Add the regulator
here so Linux can control it.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20230627-c630-uart-and-1p2-reg-v2-1-496b581935c1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the missing property to fix the dt checker warning:
qcom/sc8180x-primus.dtb: l3-cache: 'cache-unified' is a required property
Fixes: 8575f197b0 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230626-topic-bindingsfixups-v1-7-254ae8642e69@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the missing OVP interrupt. This fixes the schema warning:
wled@d800: interrupt-names: ['short'] is too short
Fixes: 37aa540cbd ("arm64: dts: qcom: pmi8994: Add WLED node")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230626-topic-bindingsfixups-v1-6-254ae8642e69@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the missing OVP interrupt. This fixes the schema warning:
wled@d800: interrupt-names: ['short'] is too short
Fixes: 0d97fdf380 ("arm64: dts: qcom: Add configuration for PMI8950 peripheral")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230626-topic-bindingsfixups-v1-5-254ae8642e69@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the missing short interrupt. This fixes the schema warning:
wled@d800: interrupt-names: ['ovp'] is too short
Fixes: 7b56a804e5 ("arm64: dts: qcom: pm660l: Add WLED support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230626-topic-bindingsfixups-v1-4-254ae8642e69@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the missing short interrupt. This fixes the schema warning:
wled@d800: interrupt-names: ['ovp'] is too short
Fixes: fe508ced49 ("arm64: dts: qcom: pm6150l: Add wled node")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20230626-topic-bindingsfixups-v1-3-254ae8642e69@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Panel bindings (boe,nv133fhm-n61) require supply which here actually can
be turned on/off via GPIO control:
sdm850-lenovo-yoga-c630.dtb: panel: 'power-supply' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20230617171512.286795-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The "smd-edge"s for remote processors are typically specified below the
remoteproc nodes. For some reason apq8064 also has them all listed in a
top-level /smd node, disabled by default. None of the boards enable them.
Right now apq8064 only has support for WCNSS/riva, but there the
smd-edge is already defined with the same interrupt etc below the
riva-pil node.
Drop these redundant definitions since the /smd top-level node is now
deprecated.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-13-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Rather than having the RPM SMD channels as the only child of a dummy
SMD node, switch to representing the RPM as remoteproc like all the
other remoteprocs (WCNSS, modem DSP).
This allows assigning additional subdevices to it like the MPM
interrupt-controller or rpm-master-stats.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-12-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Rather than having the RPM GLINK channels as the only child of a dummy
top-level rpm-glink node, switch to representing the RPM as remoteproc
like all the other remoteprocs (modem DSP, ...).
This allows assigning additional subdevices to it like the MPM
interrupt-controller or rpm-master-stats.
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # SM6375
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-11-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Rather than having the RPM SMD channels as the only child of a dummy
SMD node, switch to representing the RPM as remoteproc like all the
other remoteprocs (WCNSS, modem DSP).
This allows assigning additional subdevices to it like the MPM
interrupt-controller or rpm-master-stats.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-10-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a simple driver for the qcom,rpm-proc compatible that registers the
"smd-edge" and populates other children defined in the device tree.
Note that the DT schema belongs to the remoteproc subsystem while this
driver is added inside soc/qcom. I argue that the RPM *is* a remoteproc,
but as an implementation detail in Linux it can currently not benefit
from anything provided by the remoteproc subsystem. The RPM firmware is
usually already loaded and started by earlier components in the boot
chain and is not meant to be ever restarted.
To avoid breaking existing kernel configurations the driver is always
built when smd-rpm.c is also built. They belong closely together anyway.
To avoid build errors CONFIG_RPMSG_QCOM_SMD must be also built-in if
rpm-proc is.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-9-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Rather than looking up a dummy item from SMEM, use the new
qcom_smem_is_available() function to make the code more clear
(and reduce the overhead slightly).
Add the same check to qcom_smd_register_edge() as well to ensure that
it only succeeds if SMEM is already available - if a driver calls the
function and SMEM is not available yet then the initial state will be
read incorrectly and the RPMSG devices might never become available.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-8-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Avoid having to look up a dummy item from SMEM to detect if it is
already available or if we need to defer probing.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-7-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On Qualcomm platforms, most subsystems (e.g. audio/modem DSP) are
described as remote processors in the device tree, with a dedicated
node where properties and services related to them can be described.
The Resource Power Manager (RPM) is also such a subsystem, with a
remote processor that is running a special firmware. Unfortunately,
the RPM never got a dedicated node representing it properly in the
device tree. Most of the RPM services are described below a top-level
/smd or /rpm-glink node.
However, SMD/GLINK is just one of the communication channels to the RPM
firmware. For example, the MPM interrupt functionality provided by the
RPM does not use SMD/GLINK but writes directly to a special memory
region allocated by the RPM firmware in combination with a mailbox.
Currently there is no good place in the device tree to describe this
functionality. It doesn't belong below SMD/GLINK but it's not an
independent top-level device either.
Introduce a new "qcom,rpm-proc" compatible that allows describing the
RPM as a remote processor/subsystem like all others. The SMD/GLINK node
is moved to a "smd-edge"/"glink-edge" subnode consistent with other
existing bindings. Additional subnodes (e.g. interrupt-controller for
MPM, rpm-master-stats) can be also added there.
Deprecate using the old top-level /smd node since all SMD edges
are now specified as subnodes of the remote processor.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-6-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Semantically glink-edge and glink-rpm-edge are similar: Both describe
the communication channels to a remote processor. The RPM glink-edge is
a special case that needs slightly different properties but otherwise
it is used exactly the same.
To improve consistency use the same "glink-edge" node name also for
glink-rpm-edge. Drop the $nodename from qcom,glink-edge.yaml to avoid
matching the wrong schema. qcom,glink-edge.yaml is always referenced
explicitly from other schemas. This will already ensure that the nodes
are being checked, so it's not necessary to bind to all nodes named
"glink-edge".
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-5-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There is an ever growing list of compatibles in the smd-rpm.c driver.
A fallback compatible would help here but would still require keeping
the current list around for backwards compatibility.
As an alternative, let's switch the driver to match the rpmsg_device_id
instead, which is always "rpm_requests" on all platforms. Add a check
to ensure that there is a device tree node defined for the device since
otherwise the of_platform_populate() call will operate on the root node (/).
Similar approaches with matching rpmsg_device_id are already used in
qcom_sysmon, qcom_glink_ssr, qrtr, and rpmsg_wwan_ctrl.
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # SM6375 (G-Link)
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-4-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
To avoid several more small patches adding new RPM compatibles in the
future, add MDM9607, MSM8610, MSM8917, MSM8937 and MSM8952 at once.
All of these have been worked on over the time by some people and are
definitely compatible as-is with the smd-rpm driver.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-3-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
MSM8909 is using qcom,smd-channels but is missing in the list, add it
there as well.
Fixes: 709d473dd5 ("dt-bindings: soc: qcom: smd-rpm: Add MSM8909")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-2-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some of the enum entries are not properly ordered, fix that.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-1-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>