This adds support for the new Snapdragon 8 Elite platform with MTP and
QRD boards, QCS615 platform with the Ride board, QCS8300 platform with
its Ride board, IPQ5424 platform with the RDP466 board, MSM8917 platform
with Xiaomi Redmi 5A, and the SAR2130P platform with the Snapdragon AR2
Gen1 Smart Viewer Development Kit.
On X Elite the HP Omnibook X laptop and the Snapdragon Devkit are added.
The 8cx Gen3-based Huawaei Matebook E Go and Microsoft Windows Dev Kit
2023 are introduced.
IPQ9574 gains PCIe and TRNG descriptions, together with a few other
smaller improvements. TRNG is also enabled on the IPQ5332 platform.
On MSM8994, Huawei Nexus 6P gains power and volume keys support. USB
interrupts are corrected.
On QCM6490 the FairPhone 5 gains camera EEPROM and Rb3Gen2 development
kit gains description of the onboard LEDs.
On QRB4210 RB2 support for HDMI audio playback is added.
SA8775P gains missing clock controllers, CPUs are tied to PSCI power
domains, DisplayPort is introduced and enabled on the Ride board.
On SDM670 the GPU components are described and enabled for Google Pixel
3a, together with camera clock controller and flash LED.
Xiaomi Mi Pad 5 Pro, on SM8250, gets WiFi and Bluetooth enabled.
"global" IRQ for PCIe RC controllers are described on SM8550 and SM8650,
to allow for hotplug events.
Coresight support is added for SM8450, SM8650, X 1 Elite, QCS615,
and QCS8300.
The X Elite platform gains QUP power domains and OPPs, another PCIe
controller, another UART, and its SDHCI controllers. The ASUS Vivobook S
15 gets GPU and lid switch enabled. Microsoft Surface Laptop 7 gains
audio configuration, SD card reader support, and USB retimers. The
Lenovo Yoga Slim 7x gets its LID switch described. Dell XPS 13 gains
retimers described. The Lenovo Thinkpad T14s has additional USB ports
enabled, as well as sound and fingerprint sensor.
USB U1/U2 entry is disabled across a variety of platforms, to improve
USB stability.
sleep clock frequencies are reviewed and corrected for a variety of
platforms, so is also various remoteproc mmio address ranges.
-----BEGIN PGP SIGNATURE-----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=DnFP
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=XqwN
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.14
This adds support for the new Snapdragon 8 Elite platform with MTP and
QRD boards, QCS615 platform with the Ride board, QCS8300 platform with
its Ride board, IPQ5424 platform with the RDP466 board, MSM8917 platform
with Xiaomi Redmi 5A, and the SAR2130P platform with the Snapdragon AR2
Gen1 Smart Viewer Development Kit.
On X Elite the HP Omnibook X laptop and the Snapdragon Devkit are added.
The 8cx Gen3-based Huawaei Matebook E Go and Microsoft Windows Dev Kit
2023 are introduced.
IPQ9574 gains PCIe and TRNG descriptions, together with a few other
smaller improvements. TRNG is also enabled on the IPQ5332 platform.
On MSM8994, Huawei Nexus 6P gains power and volume keys support. USB
interrupts are corrected.
On QCM6490 the FairPhone 5 gains camera EEPROM and Rb3Gen2 development
kit gains description of the onboard LEDs.
On QRB4210 RB2 support for HDMI audio playback is added.
SA8775P gains missing clock controllers, CPUs are tied to PSCI power
domains, DisplayPort is introduced and enabled on the Ride board.
On SDM670 the GPU components are described and enabled for Google Pixel
3a, together with camera clock controller and flash LED.
Xiaomi Mi Pad 5 Pro, on SM8250, gets WiFi and Bluetooth enabled.
"global" IRQ for PCIe RC controllers are described on SM8550 and SM8650,
to allow for hotplug events.
Coresight support is added for SM8450, SM8650, X 1 Elite, QCS615,
and QCS8300.
The X Elite platform gains QUP power domains and OPPs, another PCIe
controller, another UART, and its SDHCI controllers. The ASUS Vivobook S
15 gets GPU and lid switch enabled. Microsoft Surface Laptop 7 gains
audio configuration, SD card reader support, and USB retimers. The
Lenovo Yoga Slim 7x gets its LID switch described. Dell XPS 13 gains
retimers described. The Lenovo Thinkpad T14s has additional USB ports
enabled, as well as sound and fingerprint sensor.
USB U1/U2 entry is disabled across a variety of platforms, to improve
USB stability.
sleep clock frequencies are reviewed and corrected for a variety of
platforms, so is also various remoteproc mmio address ranges.
* tag 'qcom-arm64-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (240 commits)
arm64: dts: qcom: x1e80100-romulus: Update firmware nodes
arm64: dts: qcom: msm8916-samsung-serranove: Add display panel
arm64: dts: qcom: sm8650: Add 'global' interrupt to the PCIe RC nodes
arm64: dts: qcom: sm8550: Add 'global' interrupt to the PCIe RC nodes
arm64: dts: qcom: Remove unused and undocumented properties
arm64: dts: qcom: sdm450-lenovo-tbx605f: add DSI panel nodes
arm64: dts: qcom: pmi8950: add LAB-IBB nodes
arm64: dts: qcom: ipq5424: enable the download mode support
arm64: dts: qcom: ipq5424: add scm node
arm64: dts: qcom: sm8250: Fix interrupt types of camss interrupts
arm64: dts: qcom: sdm845: Fix interrupt types of camss interrupts
arm64: dts: qcom: sc8280xp: Fix interrupt type of camss interrupts
arm64: dts: qcom: qcs8300-ride: Enable USB controllers
arm64: dts: qcom: qcs8300: Add support for usb nodes
arm64: dts: qcom: qcs8300: Add support for clock controllers
arm64: dts: qcom: sm8450: Add coresight nodes
arm64: dts: qcom: sa8775p: Fix the size of 'addr_space' regions
arm64: dts: qcom: qcs615-ride: Enable UFS node
arm64: dts: qcom: qcs615: add UFS node
arm64: dts: qcom: ipq5424: Add USB controller and phy nodes
...
Link: https://lore.kernel.org/r/20250111181025.394631-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add support for DMA engine and audio codec on F1C100s
and enable audio codec on Lichee Pi Nano
- Add syscon and SRAM nodes for A100
- Enable CPU DVFS for Tanix TX1
- Explicitly configure TCON0 pixel clock parent according to display
output used
This includes one commit shared with the clock tree
dt-bindings: clock: sunxi: Export PLL_VIDEO_2X and PLL_MIPI
which adds the macros for the TCON0 pixel clock parents.
-----BEGIN PGP SIGNATURE-----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=+zy6
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=zhiA
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner Device Tree changes for 6.14
- Add support for DMA engine and audio codec on F1C100s
and enable audio codec on Lichee Pi Nano
- Add syscon and SRAM nodes for A100
- Enable CPU DVFS for Tanix TX1
- Explicitly configure TCON0 pixel clock parent according to display
output used
This includes one commit shared with the clock tree
dt-bindings: clock: sunxi: Export PLL_VIDEO_2X and PLL_MIPI
which adds the macros for the TCON0 pixel clock parents.
* tag 'sunxi-dt-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a64: explicitly assign clock parent for TCON0
dt-bindings: clock: sunxi: Export PLL_VIDEO_2X and PLL_MIPI
arm64: dts: allwinner: h313: enable DVFS for Tanix TX1
arm64: dts: allwinner: a100: Add syscon nodes
dt-bindings: sram: sunxi-sram: Add A100 compatible
ARM: dts: suniv: f1c100s: Activate Audio Codec for Lichee Pi Nano
ARM: dts: suniv: f1c100s: Add support for Audio Codec
ARM: dts: suniv: f1c100s: Add support for DMA
Link: https://lore.kernel.org/r/Z36h2FwUxro8rouO@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add pin control support for the RZ/G3E SoC and the RZ/G3E SMARC
Carrier-II EVK development board,
- Add Image Signal Processor helper block (FCPVX and VSPX) support for
the R-Car V4H SoC,
- Describe odd C-PHY wiring on the White Hawk CSI/DSI sub-board,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZ3wB8AAKCRCKwlD9ZEnx
cIvMAQCrRApne6xtA5WnNe5GCDkg/AddJgTImIJ7VvYJdNRi1gEA+2wlAtzO/s+S
UB1i0B7ApeY+SeL/gO7+ntK4if3R1g4=
=/DFi
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=wfr/
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v6.14-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.14 (take two)
- Add pin control support for the RZ/G3E SoC and the RZ/G3E SMARC
Carrier-II EVK development board,
- Add Image Signal Processor helper block (FCPVX and VSPX) support for
the R-Car V4H SoC,
- Describe odd C-PHY wiring on the White Hawk CSI/DSI sub-board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.14-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: white-hawk-csi-dsi: Define CSI-2 data line orders
arm64: dts: renesas: r8a779g0: Add VSPX instances
arm64: dts: renesas: r8a779g0: Add FCPVX instances
arm64: dts: renesas: r9a09g047e57-smarc: Add SCIF pincontrol
arm64: dts: renesas: r9a09g047: Add pincontrol node
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Replace RZG2L macros
dt-bindings: pinctrl: renesas: Document RZ/G3E SoC
dt-bindings: pinctrl: renesas: Add alpha-numerical port support for RZ/V2H
Link: https://lore.kernel.org/r/cover.1736180859.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Exynos8895: Add UART nodes, PMU (performance) for the M2 cluster and
I2C controllers in the camera block (HSI2C in CAM0-3).
2. Exynos990: Add Power Management Unit (Samsung block), PMU
(performance) for M5 cluster and two clock controllers.
3. ExynosAutov920: Add watchdog and DMA controllers.
4. Google GS101: Minor fixes for phy and USB. Add USB Type-C.
5. Exynos850-e850-96 board: Drop gap in memory layout.
6. New SoC: Exynos9810.
7. New boards, all mobile phones:
- Exynos9810:
Samsung Galaxy S9 (SM-G960F)
- Exynos990:
Samsung Galaxy S20 FE (SM-G780F)
Samsung Galaxy S20 5G (SM-G980F)
-----BEGIN PGP SIGNATURE-----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=Ps/u
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=iQYo
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.14
1. Exynos8895: Add UART nodes, PMU (performance) for the M2 cluster and
I2C controllers in the camera block (HSI2C in CAM0-3).
2. Exynos990: Add Power Management Unit (Samsung block), PMU
(performance) for M5 cluster and two clock controllers.
3. ExynosAutov920: Add watchdog and DMA controllers.
4. Google GS101: Minor fixes for phy and USB. Add USB Type-C.
5. Exynos850-e850-96 board: Drop gap in memory layout.
6. New SoC: Exynos9810.
7. New boards, all mobile phones:
- Exynos9810:
Samsung Galaxy S9 (SM-G960F)
- Exynos990:
Samsung Galaxy S20 FE (SM-G780F)
Samsung Galaxy S20 5G (SM-G980F)
* tag 'samsung-dt64-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (23 commits)
arm64: dts: exynos8895: Add camera hsi2c nodes
arm64: dts: exynos990: Add clock management unit nodes
arm64: dts: exynos: gs101-oriole: add pd-disable and typec-power-opmode
arm64: dts: exynos: gs101-oriole: enable Maxim max77759 TCPCi
arm64: dts: exynos: Add initial support for Samsung Galaxy S9 (SM-G960F)
arm64: dts: exynos: Add Exynos9810 SoC support
arm64: dts: exynos850-e850-96: Specify reserved secure memory explicitly
arm64: dts: exynos990: Add a PMU node for the third cluster
arm64: dts: exynosautov920: Add DMA nodes
arm64: dts: exynos8895: Add a PMU node for the second cluster
dt-bindings: clock: samsung: Add Exynos990 SoC CMU bindings
arm64: dts: exynosautov920: add watchdog DT node
arm64: dts: exynos: Add initial support for Samsung Galaxy S20 (x1slte)
arm64: dts: exynos: Add initial support for Samsung Galaxy S20 5G (x1s)
arm64: dts: exynos: Add initial support for Samsung Galaxy S20 Series boards (x1s-common)
dt-bindings: arm: samsung: samsung-boards: Add bindings for SM-G981B and SM-G980F board
arm64: dts: exynos: gs101: allow stable USB phy Vbus detection
arm64: dts: exynos: gs101: phy region for exynos5-usbdrd is larger
MAINTAINERS: add myself and Tudor as reviewers for Google Tensor SoC
arm64: dts: exynos990: Add pmu and syscon-reboot nodes
...
Link: https://lore.kernel.org/r/20241231131742.134329-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The CMN PLL controller provides clocks to networking hardware blocks
and to GCC on Qualcomm IPQ9574 SoC. It receives input clock from the
on-chip Wi-Fi, and produces output clocks at fixed rates. These output
rates are predetermined, and are unrelated to the input clock rate.
The primary purpose of CMN PLL is to supply clocks to the networking
hardware such as PPE (packet process engine), PCS and the externally
connected switch or PHY device. The CMN PLL block also outputs fixed
rate clocks to GCC, such as 24 MHZ as XO clock and 32 KHZ as sleep
clock supplied to GCC.
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250103-qcom_ipq_cmnpll-v8-1-c89fb4d4849d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add bindings for the Qualcomm SM8750 Display Clock Controller (DISPCC).
Bindings are similar to existing SM8550 and SM8650 (same clock inputs),
but the clock hierarchy is quite different and these are not compatible
devices.
The binding header was copied from downstream sources, so I retained
original copyrights.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250106-sm8750-dispcc-v2-1-6f42beda6317@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add device tree bindings for the global clock controller on Qualcomm
SM8750 platform.
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241204-sm8750_master_clks-v3-5-1a8f31a53a86@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Export PLL_VIDEO_2X and PLL_MIPI, these will be used to explicitly
select TCON0 clock parent in dts
Fixes: ca1170b699 ("clk: sunxi-ng: a64: force select PLL_MIPI in TCON0 mux")
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Frank Oltmanns <frank@oltmanns.dev> # on PinePhone
Tested-by: Stuart Gathman <stuart@gathman.org> # on OG Pinebook
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://patch.msgid.link/20250104074035.1611136-2-anarsoul@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Pin control DT bindings and binding definitions for the Renesas RZ/G3E
(R9A09G047) SoC, shared by driver and DT source files.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZ3hDOwAKCRCKwlD9ZEnx
cO0MAQDIZaN9Ry+BBi8nksGT2tQtnSEXni2iqZzaKfN1CrBe4AEAuFup2hkQhhLy
MD2fvxNTacoXxgy7iGy764SORPlccgs=
=vf2c
-----END PGP SIGNATURE-----
Merge tag 'renesas-r9a09g047-dt-binding-defs-tag2' into renesas-dts-for-v6.14
Renesas RZ/G3E Pin Control DT Binding Definitions
Pin control DT bindings and binding definitions for the Renesas RZ/G3E
(R9A09G047) SoC, shared by driver and DT source files.
Pin control DT binding definitions for the Renesas RZ/V2H (R9A09G057)
SoC, shared by driver and DT source files.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZ3hCTwAKCRCKwlD9ZEnx
cMTDAQCkOESajJjg2yz8v2WjNI/7UGyeBukAva2xryU95mrDzgEAzrR+Yv8g4xUI
lSOCp3kZKICrffxkgHDGOTv8bTFC3gM=
=KRhC
-----END PGP SIGNATURE-----
Merge tag 'renesas-r9a09g057-dt-binding-defs-tag2' into renesas-dts-for-v6.14
Renesas RZ/V2H Pin Control DT Binding Definitions
Pin control DT binding definitions for the Renesas RZ/V2H (R9A09G057)
SoC, shared by driver and DT source files.
Add documentation for the pin controller found on the Renesas RZ/G3E
(R9A09G047) SoC. The RZ/G3E PFC is similar to the RZ/V2H SoC but has more
pins(P00-PS3).
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241216195325.164212-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
RZ/V2H has ports P0-P9 and PA-PB. Add support for defining alpha-numerical
ports in DT using RZV2H_* macros.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241216195325.164212-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
- Add more serial (SCIF), power monitor, ADC, and sound support for
the RZ/G3S SoC and the RZ/G3S SMARC SoM and development board,
- Add support for the R-Car V4H ES3.0 (R8A779G3) SoC on the White Hawk
Single development board,
- Add display support for the R-Car V4M SoC and the Gray Hawk Single
development board,
- Add video capture support for the Gray Hawk Single development
board,
- Add initial support for the RZ/G3E (R9A09G047) SoC and the RZ/G3E
SMARC SoM and Carrier-II EVK development board,
- Add support for 5-port MATEnet on the Falcon Ethernet sub-board,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZ2U9IgAKCRCKwlD9ZEnx
cFrFAQDetsak3pHicXh5uCe2uHdzdPKKPsybNgSXV8PBh1bUkgEAqAWDzcV85Kpa
x6M9Wnf8UdUuE9OMzTLhkbOCAG4IsAI=
=afAu
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=nVZZ
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v6.14-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.14
- Add more serial (SCIF), power monitor, ADC, and sound support for
the RZ/G3S SoC and the RZ/G3S SMARC SoM and development board,
- Add support for the R-Car V4H ES3.0 (R8A779G3) SoC on the White Hawk
Single development board,
- Add display support for the R-Car V4M SoC and the Gray Hawk Single
development board,
- Add video capture support for the Gray Hawk Single development
board,
- Add initial support for the RZ/G3E (R9A09G047) SoC and the RZ/G3E
SMARC SoM and Carrier-II EVK development board,
- Add support for 5-port MATEnet on the Falcon Ethernet sub-board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.14-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (33 commits)
arm64: dts: renesas: r9a09g047: Add I2C nodes
arm64: dts: renesas: rzg3s-smarc: Add sound card
arm64: dts: renesas: rzg3s-smarc: Enable SSI3
arm64: dts: renesas: Add da7212 audio codec node
arm64: dts: renesas: rzg3s-smarc-som: Add versa3 clock generator node
arm64: dts: renesas: r9a08g045: Add SSI nodes
arm64: dts: renesas: rzg3s-smarc-som: Enable ADC
arm64: dts: renesas: r9a08g045: Add ADC node
arm64: dts: renesas: Add initial device tree for RZ/G3E SMARC EVK board
arm64: dts: renesas: Add initial support for RZ/G3E SMARC SoM
arm64: dts: renesas: r9a09g047: Add OPP table
arm64: dts: renesas: Add initial DTSI for RZ/G3E SoC
arm64: dts: renesas: falcon-ethernet: Describe PHYs connected on the breakout board
arm64: dts: renesas: r8a779a0: Remove address- and size-cells from AVB[1-5]
dt-bindings: clock: renesas: Document RZ/G3E SoC CPG
dt-bindings: soc: renesas: Document RZ/G3E SMARC SoM and Carrier-II EVK
dt-bindings: soc: renesas: Document Renesas RZ/G3E SoC variants
arm64: dts: renesas: gray-hawk-single: Add video capture support
arm64: dts: renesas: gray-hawk-single: Add DisplayPort support
arm64: dts: renesas: r8a779h0: Add display support
...
Link: https://lore.kernel.org/r/cover.1734689803.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add interconnect device bindings. These devices can be used
to describe any RPMh and NoC based interconnect devices.
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241204-sm8750_master_interconnects-v3-1-3d9aad4200e9@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add dt-schema documentation for the Exynos990 SoC CMU.
This clock management unit has a topmost block (CMU_TOP)
that generates top clocks for other blocks. Currently the
only other block implemented is CMU_HSI0, which provides
clocks for the USB part of the SoC.
Also, device-tree binding definitions added for these blocks:
- CMU_TOP
- CMU_HSI0
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Igor Belwon <igor.belwon@mentallysanemainliners.org>
Link: https://lore.kernel.org/r/20241209-exynos990-cmu-v4-1-57f07080f9e4@mentallysanemainliners.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Document the device tree bindings for the Renesas RZ/G3E SoC
Clock Pulse Generator (CPG).
Also define constants for the core clocks of the RZ/G3E SoC.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241203105005.103927-5-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
conjunction with overly long idle sleeps, falsely trigger the negative
motion detection of clocksources
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmdVb44ACgkQEsHwGGHe
VUr/bA/+L5vH39rL4IGQ05LZ/TaZC5iSadsWeW26UccbV+5jw4q2hmVterH3TXDp
ujsvPmRLPN/tjCdwMNKDRmVTc5nBoO+OHBErf+o3mqZMI8XdXz7bOEvNhjnlIPnT
ILu/c8h2g3bHpFBYHsJjyhrIkfvfspG/yeD6V7SXI1r0StqRfoo6QmbbZwYpdrn3
+ORs8TdW6GEp7gJhdCzSXxzbfXnvtRsBZvsBLxoIter9Kqd+pFpVxj7CqoHWEiBM
NQHN/2DG3uczoVVtOB7VK9edAYlpe9mzokB4wRClXo21D7JFze0m2TJGJ3hf9eRZ
RbzZea0CQNa11NUlxoRUrN+jG/CHjnptNFycRJIEtb6YgKyoizJ/x8CBOWI3a8nU
NTGBIwXAeYcYrrsP5f3bmDRcks9OO+E2quZiGJZorq1zDxzxnPs8ALmtwCB64UhD
ro0VAT1d7JuMdnmFUKSwf35nLydnUiBqRC2cb03jMZAze+YmFCgMh5xjtzTPw+WE
QDIR9Eu6ebSM80ldXGISHYn1wHxQVFtJ2cN9gmV+Lnaekys6huDQkARCoWfLhdYc
CiqZSvlMPis+VAhkglwnHlxc/mGpfFTZXh47oXzNbXw2J2bWhhbyzl9X8UiSqw+A
UOfq/JRis2j6NsmKkGvTU/hGtEPOzXw2EStAuXm+OVg5TDKwr74=
=mARf
-----END PGP SIGNATURE-----
Merge tag 'timers_urgent_for_v6.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Handle the case where clocksources with small counter width can,
in conjunction with overly long idle sleeps, falsely trigger the
negative motion detection of clocksources
* tag 'timers_urgent_for_v6.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Make negative motion detection more robust
The usual bunch of singletons - please see the relevant changelogs for
details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ1U/QwAKCRDdBJ7gKXxA
jnE7AQC0eyNNvaL5pLCIxN/Vmr8YeuWP1dldgI29TjrH/JKjSQEAihZNqVZYjoIT
Gf7Y+IKnc4LbfAXcTe+MfJFeDexM5AU=
=U5LQ
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-12-07-22-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"24 hotfixes. 17 are cc:stable. 15 are MM and 9 are non-MM.
The usual bunch of singletons - please see the relevant changelogs for
details"
* tag 'mm-hotfixes-stable-2024-12-07-22-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (24 commits)
iio: magnetometer: yas530: use signed integer type for clamp limits
sched/numa: fix memory leak due to the overwritten vma->numab_state
mm/damon: fix order of arguments in damos_before_apply tracepoint
lib: stackinit: hide never-taken branch from compiler
mm/filemap: don't call folio_test_locked() without a reference in next_uptodate_folio()
scatterlist: fix incorrect func name in kernel-doc
mm: correct typo in MMAP_STATE() macro
mm: respect mmap hint address when aligning for THP
mm: memcg: declare do_memsw_account inline
mm/codetag: swap tags when migrate pages
ocfs2: update seq_file index in ocfs2_dlm_seq_next
stackdepot: fix stack_depot_save_flags() in NMI context
mm: open-code page_folio() in dump_page()
mm: open-code PageTail in folio_flags() and const_folio_flags()
mm: fix vrealloc()'s KASAN poisoning logic
Revert "readahead: properly shorten readahead when falling back to do_page_cache_ra()"
selftests/damon: add _damon_sysfs.py to TEST_FILES
selftest: hugetlb_dio: fix test naming
ocfs2: free inode when ocfs2_get_init_inode() fails
nilfs2: fix potential out-of-bounds memory access in nilfs_find_entry()
...
Large number of small fixes, all in drivers. The three largest fixes
are dead code removal in bfa, qla2xxx: fix abort timeout in bsg and
mpi3mr: Fix corrupt config pages PHY state is switched in sysfs
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZ1SaJCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYNpAQDidk9u
UrvkZ3GhJboh3JpoTS9HWDxFQPmYfsQob80jEAD7BGcX3RN+zlGUF0YVvyvZ+83r
w//aZSBXqAe3X0fmqaU=
=V/Qx
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Large number of small fixes, all in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: scsi_debug: Fix hrtimer support for ndelay
scsi: storvsc: Do not flag MAINTENANCE_IN return of SRB_STATUS_DATA_OVERRUN as an error
scsi: ufs: core: Add missing post notify for power mode change
scsi: sg: Fix slab-use-after-free read in sg_release()
scsi: ufs: core: sysfs: Prevent div by zero
scsi: qla2xxx: Update version to 10.02.09.400-k
scsi: qla2xxx: Supported speed displayed incorrectly for VPorts
scsi: qla2xxx: Fix NVMe and NPIV connect issue
scsi: qla2xxx: Remove check req_sg_cnt should be equal to rsp_sg_cnt
scsi: qla2xxx: Fix use after free on unload
scsi: qla2xxx: Fix abort in bsg timeout
scsi: mpi3mr: Update driver version to 8.12.0.3.50
scsi: mpi3mr: Handling of fault code for insufficient power
scsi: mpi3mr: Start controller indexing from 0
scsi: mpi3mr: Fix corrupt config pages PHY state is switched in sysfs
scsi: mpi3mr: Synchronize access to ioctl data buffer
scsi: mpt3sas: Update driver version to 51.100.00.00
scsi: mpt3sas: Diag-Reset when Doorbell-In-Use bit is set during driver load time
scsi: ufs: pltfrm: Dellocate HBA during ufshcd_pltfrm_remove()
scsi: ufs: pltfrm: Drop PM runtime reference count after ufshcd_remove()
...
-----BEGIN PGP SIGNATURE-----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=loQx
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.13-20241207' of git://git.kernel.dk/linux
Pull io_uring fix from Jens Axboe:
"A single fix for a parameter type which affects 32-bit"
* tag 'io_uring-6.13-20241207' of git://git.kernel.dk/linux:
io_uring: Change res2 parameter type in io_uring_cmd_done
dma-fence:
- Fix reference leak on fence-merge failure path
- Simplify fence merging with kernel's sort()
- Fix dma_fence_array_signaled() to ensure forward progress
dp_mst:
- Fix MST sideband message body length check
- Fix a bunch of locking/state handling with DP MST msgs
sti:
- Add __iomem for mixer_dbg_mxn()'s parameter
xe:
- Missing init value and 64-bit write-order check
- Fix a memory allocation issue causing lockdep violation
v3d:
- performance counter fix.
-----BEGIN PGP SIGNATURE-----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=NMaJ
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2024-12-07' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Pretty quiet week which is probably expected after US holidays, the
dma-fence and displayport MST message handling fixes make up the bulk
of this, along with a couple of minor xe and other driver fixes.
dma-fence:
- Fix reference leak on fence-merge failure path
- Simplify fence merging with kernel's sort()
- Fix dma_fence_array_signaled() to ensure forward progress
dp_mst:
- Fix MST sideband message body length check
- Fix a bunch of locking/state handling with DP MST msgs
sti:
- Add __iomem for mixer_dbg_mxn()'s parameter
xe:
- Missing init value and 64-bit write-order check
- Fix a memory allocation issue causing lockdep violation
v3d:
- Performance counter fix"
* tag 'drm-fixes-2024-12-07' of https://gitlab.freedesktop.org/drm/kernel:
drm/v3d: Enable Performance Counters before clearing them
drm/dp_mst: Use reset_msg_rx_state() instead of open coding it
drm/dp_mst: Reset message rx state after OOM in drm_dp_mst_handle_up_req()
drm/dp_mst: Ensure mst_primary pointer is valid in drm_dp_mst_handle_up_req()
drm/dp_mst: Fix down request message timeout handling
drm/dp_mst: Simplify error path in drm_dp_mst_handle_down_rep()
drm/dp_mst: Verify request type in the corresponding down message reply
drm/dp_mst: Fix resetting msg rx state after topology removal
drm/xe: Move the coredump registration to the worker thread
drm/xe/guc: Fix missing init value and add register order check
drm/sti: Add __iomem for mixer_dbg_mxn's parameter
drm/dp_mst: Fix MST sideband message body length check
dma-buf: fix dma_fence_array_signaled v4
dma-fence: Use kernel's sort for merging fences
dma-fence: Fix reference leak on fence merge failure path
Since the order of the scheme_idx and target_idx arguments in TP_ARGS is
reversed, they are stored in the trace record in reverse.
Link: https://lkml.kernel.org/r/20241115182023.43118-1-sj@kernel.org
Link: https://patch.msgid.link/20241112154828.40307-1-akinobu.mita@gmail.com
Fixes: c603c630b5 ("mm/damon/core: add a tracepoint for damos apply target regions")
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix a kernel-doc warning by making the kernel-doc function description
match the function name:
include/linux/scatterlist.h:323: warning: expecting prototype for sg_unmark_bus_address(). Prototype was for sg_dma_unmark_bus_address() instead
Link: https://lkml.kernel.org/r/20241130022406.537973-1-rdunlap@infradead.org
Fixes: 4239930120 ("lib/scatterlist: add flag for indicating P2PDMA segments in an SGL")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Current solution to adjust codetag references during page migration is
done in 3 steps:
1. sets the codetag reference of the old page as empty (not pointing
to any codetag);
2. subtracts counters of the new page to compensate for its own
allocation;
3. sets codetag reference of the new page to point to the codetag of
the old page.
This does not work if CONFIG_MEM_ALLOC_PROFILING_DEBUG=n because
set_codetag_empty() becomes NOOP. Instead, let's simply swap codetag
references so that the new page is referencing the old codetag and the old
page is referencing the new codetag. This way accounting stays valid and
the logic makes more sense.
Link: https://lkml.kernel.org/r/20241129025213.34836-1-00107082@163.com
Fixes: e0a955bf7f ("mm/codetag: add pgalloc_tag_copy()")
Signed-off-by: David Wang <00107082@163.com>
Closes: https://lore.kernel.org/lkml/20241124074318.399027-1-00107082@163.com/
Acked-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Per documentation, stack_depot_save_flags() was meant to be usable from
NMI context if STACK_DEPOT_FLAG_CAN_ALLOC is unset. However, it still
would try to take the pool_lock in an attempt to save a stack trace in the
current pool (if space is available).
This could result in deadlock if an NMI is handled while pool_lock is
already held. To avoid deadlock, only try to take the lock in NMI context
and give up if unsuccessful.
The documentation is fixed to clearly convey this.
Link: https://lkml.kernel.org/r/Z0CcyfbPqmxJ9uJH@elver.google.com
Link: https://lkml.kernel.org/r/20241122154051.3914732-1-elver@google.com
Fixes: 4434a56ec2 ("stackdepot: make fast paths lock-less again")
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It is unsafe to call PageTail() in dump_page() as page_is_fake_head() will
almost certainly return true when called on a head page that is copied to
the stack. That will cause the VM_BUG_ON_PGFLAGS() in const_folio_flags()
to trigger when it shouldn't. Fortunately, we don't need to call
PageTail() here; it's fine to have a pointer to a virtual alias of the
page's flag word rather than the real page's flag word.
Link: https://lkml.kernel.org/r/20241125201721.2963278-1-willy@infradead.org
Fixes: fae7d834c4 ("mm: add __dump_folio()")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Kees Cook <kees@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
- Correct typos in comments
- Elaborate a comment about how the uAPI works for
IOMMU_HW_INFO_TYPE_ARM_SMMUV3
- Fix a double free on error path and add test coverage for the bug
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZ1Hx1QAKCRCFwuHvBreF
YRA6AQCtirCoWoMgq1mSsFjtzmr5XCffS1g6T7KsKs54sDZZXAD/doa4NpE3LTPo
huOPMfH2O0HufLpj+FTzew4q0RbAJAc=
=z0Ak
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"One bug fix and some documentation updates:
- Correct typos in comments
- Elaborate a comment about how the uAPI works for
IOMMU_HW_INFO_TYPE_ARM_SMMUV3
- Fix a double free on error path and add test coverage for the bug"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommu/arm-smmu-v3: Improve uAPI comment for IOMMU_HW_INFO_TYPE_ARM_SMMUV3
iommufd/selftest: Cover IOMMU_FAULT_QUEUE_ALLOC in iommufd_fail_nth
iommufd: Fix out_fput in iommufd_fault_alloc()
iommufd: Fix typos in kernel-doc comments
Current release - regressions:
- rtnetlink: fix double call of rtnl_link_get_net_ifla()
- tcp: populate XPS related fields of timewait sockets
- ethtool: fix access to uninitialized fields in set RXNFC command
- selinux: use sk_to_full_sk() in selinux_ip_output()
Current release - new code bugs:
- net: make napi_hash_lock irq safe
- eth: bnxt_en: support header page pool in queue API
- eth: ice: fix NULL pointer dereference in switchdev
Previous releases - regressions:
- core: fix icmp host relookup triggering ip_rt_bug
- ipv6:
- avoid possible NULL deref in modify_prefix_route()
- release expired exception dst cached in socket
- smc: fix LGR and link use-after-free issue
- hsr: avoid potential out-of-bound access in fill_frame_info()
- can: hi311x: fix potential use-after-free
- eth: ice: fix VLAN pruning in switchdev mode
Previous releases - always broken:
- netfilter:
- ipset: hold module reference while requesting a module
- nft_inner: incorrect percpu area handling under softirq
- can: j1939: fix skb reference counting
- eth: mlxsw: use correct key block on Spectrum-4
- eth: mlx5: fix memory leak in mlx5hws_definer_calc_layout
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=nkPk
-----END PGP SIGNATURE-----
Merge tag 'net-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can and netfilter.
Current release - regressions:
- rtnetlink: fix double call of rtnl_link_get_net_ifla()
- tcp: populate XPS related fields of timewait sockets
- ethtool: fix access to uninitialized fields in set RXNFC command
- selinux: use sk_to_full_sk() in selinux_ip_output()
Current release - new code bugs:
- net: make napi_hash_lock irq safe
- eth:
- bnxt_en: support header page pool in queue API
- ice: fix NULL pointer dereference in switchdev
Previous releases - regressions:
- core: fix icmp host relookup triggering ip_rt_bug
- ipv6:
- avoid possible NULL deref in modify_prefix_route()
- release expired exception dst cached in socket
- smc: fix LGR and link use-after-free issue
- hsr: avoid potential out-of-bound access in fill_frame_info()
- can: hi311x: fix potential use-after-free
- eth: ice: fix VLAN pruning in switchdev mode
Previous releases - always broken:
- netfilter:
- ipset: hold module reference while requesting a module
- nft_inner: incorrect percpu area handling under softirq
- can: j1939: fix skb reference counting
- eth:
- mlxsw: use correct key block on Spectrum-4
- mlx5: fix memory leak in mlx5hws_definer_calc_layout"
* tag 'net-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
net :mana :Request a V2 response version for MANA_QUERY_GF_STAT
net: avoid potential UAF in default_operstate()
vsock/test: verify socket options after setting them
vsock/test: fix parameter types in SO_VM_SOCKETS_* calls
vsock/test: fix failures due to wrong SO_RCVLOWAT parameter
net/mlx5e: Remove workaround to avoid syndrome for internal port
net/mlx5e: SD, Use correct mdev to build channel param
net/mlx5: E-Switch, Fix switching to switchdev mode in MPV
net/mlx5: E-Switch, Fix switching to switchdev mode with IB device disabled
net/mlx5: HWS: Properly set bwc queue locks lock classes
net/mlx5: HWS: Fix memory leak in mlx5hws_definer_calc_layout
bnxt_en: handle tpa_info in queue API implementation
bnxt_en: refactor bnxt_alloc_rx_rings() to call bnxt_alloc_rx_agg_bmap()
bnxt_en: refactor tpa_info alloc/free into helpers
geneve: do not assume mac header is set in geneve_xmit_skb()
mlxsw: spectrum_acl_flex_keys: Use correct key block on Spectrum-4
ethtool: Fix wrong mod state in case of verbose and no_mask bitset
ipmr: tune the ipmr_can_free_table() checks.
netfilter: nft_set_hash: skip duplicated elements pending gc run
netfilter: ipset: Hold module reference while requesting a module
...
-----BEGIN PGP SIGNATURE-----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=9aQY
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2024120501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- regression fix in suspend/resume for i2c-hid (Kenny Levinsen)
- fix wacom driver assuming a name can not be null (WangYuli)
- a couple of constify changes/fixes (Thomas Weißschuh)
- a couple of selftests/hid fixes (Maximilian Heyne & Benjamin
Tissoires)
* tag 'hid-for-linus-2024120501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
selftests/hid: fix kfunc inclusions with newer bpftool
HID: bpf: drop unneeded casts discarding const
HID: bpf: constify hid_ops
selftests: hid: fix typo and exit code
HID: wacom: fix when get product name maybe null pointer
HID: i2c-hid: Revert to using power commands to wake on resume
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iEYEABECAAYFAmdO8FgACgkQ+iyteGJfRsqdmgCgqPArbZweV/LTPcZXx89MaIEd
hG8AoLrh8n5L08d6r5v1sII5To4KoZI7
=IX0/
-----END PGP SIGNATURE-----
Merge tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add support for exynosautov920 SoC
- Add support for Airoha EN7851 watchdog
- Add support for MT6735 TOPRGU/WDT
- Delete the cpu5wdt driver
- Always print when registering watchdog fails
- Several other small fixes and improvements
* tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog: (36 commits)
watchdog: rti: of: honor timeout-sec property
watchdog: s3c2410_wdt: add support for exynosautov920 SoC
dt-bindings: watchdog: Document ExynosAutoV920 watchdog bindings
watchdog: mediatek: Add support for MT6735 TOPRGU/WDT
watchdog: mediatek: Make sure system reset gets asserted in mtk_wdt_restart()
dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property
dt-bindings: watchdog: Document Qualcomm QCS8300
docs: ABI: Fix spelling mistake in pretimeout_avaialable_governors
Revert "watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs"
watchdog: rzg2l_wdt: Power on the watchdog domain in the restart handler
watchdog: Switch back to struct platform_driver::remove()
watchdog: it87_wdt: add PWRGD enable quirk for Qotom QCML04
watchdog: da9063: Remove __maybe_unused notations
watchdog: da9063: Do not use a global variable
watchdog: Delete the cpu5wdt driver
watchdog: Add support for Airoha EN7851 watchdog
dt-bindings: watchdog: airoha: document watchdog for Airoha EN7581
watchdog: sl28cpld_wdt: don't print out if registering watchdog fails
watchdog: rza_wdt: don't print out if registering watchdog fails
watchdog: rti_wdt: don't print out if registering watchdog fails
...
Guenter reported boot stalls on a emulated ARM 32-bit platform, which has a
24-bit wide clocksource.
It turns out that the calculated maximal idle time, which limits idle
sleeps to prevent clocksource wrap arounds, is close to the point where the
negative motion detection triggers.
max_idle_ns: 597268854 ns
negative motion tripping point: 671088640 ns
If the idle wakeup is delayed beyond that point, the clocksource
advances far enough to trigger the negative motion detection. This
prevents the clock to advance and in the worst case the system stalls
completely if the consecutive sleeps based on the stale clock are
delayed as well.
Cure this by calculating a more robust cut-off value for negative motion,
which covers 87.5% of the actual clocksource counter width. Compare the
delta against this value to catch negative motion. This is specifically for
clock sources with a small counter width as their wrap around time is close
to the half counter width. For clock sources with wide counters this is not
a problem because the maximum idle time is far from the half counter width
due to the math overflow protection constraints.
For the case at hand this results in a tripping point of 1174405120ns.
Note, that this cannot prevent issues when the delay exceeds the 87.5%
margin, but that's not different from the previous unchecked version which
allowed arbitrary time jumps.
Systems with small counter width are prone to invalid results, but this
problem is unlikely to be seen on real hardware. If such a system
completely stalls for more than half a second, then there are other more
urgent problems than the counter wrapping around.
Fixes: c163e40af9 ("timekeeping: Always check for negative motion")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/all/8734j5ul4x.ffs@tglx
Closes: https://lore.kernel.org/all/387b120b-d68a-45e8-b6ab-768cd95d11c2@roeck-us.net
If the MST topology is removed during the reception of an MST down reply
or MST up request sideband message, the
drm_dp_mst_topology_mgr::up_req_recv/down_rep_recv states could be reset
from one thread via drm_dp_mst_topology_mgr_set_mst(false), racing with
the reading/parsing of the message from another thread via
drm_dp_mst_handle_down_rep() or drm_dp_mst_handle_up_req(). The race is
possible since the reader/parser doesn't hold any lock while accessing
the reception state. This in turn can lead to a memory corruption in the
reader/parser as described by commit bd2fccac61 ("drm/dp_mst: Fix MST
sideband message body length check").
Fix the above by resetting the message reception state if needed before
reading/parsing a message. Another solution would be to hold the
drm_dp_mst_topology_mgr::lock for the whole duration of the message
reception/parsing in drm_dp_mst_handle_down_rep() and
drm_dp_mst_handle_up_req(), however this would require a bigger change.
Since the fix is also needed for stable, opting for the simpler solution
in this patch.
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org>
Fixes: 1d082618bb ("drm/display/dp_mst: Fix down/up message handling after sink disconnect")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13056
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203160223.2926014-2-imre.deak@intel.com
-----BEGIN PGP SIGNATURE-----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=3N6k
-----END PGP SIGNATURE-----
Merge tag 'nf-24-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix esoteric undefined behaviour due to uninitialized stack access
in ip_vs_protocol_init(), from Jinghao Jia.
2) Fix iptables xt_LED slab-out-of-bounds due to incorrect sanitization
of the led string identifier, reported by syzbot. Patch from
Dmitry Antipov.
3) Remove WARN_ON_ONCE reachable from userspace to check for the maximum
cgroup level, nft_socket cgroup matching is restricted to 255 levels,
but cgroups allow for INT_MAX levels by default. Reported by syzbot.
4) Fix nft_inner incorrect use of percpu area to store tunnel parser
context with softirqs, resulting in inconsistent inner header
offsets that could lead to bogus rule mismatches, reported by syzbot.
5) Grab module reference on ipset core while requesting set type modules,
otherwise kernel crash is possible by removing ipset core module,
patch from Phil Sutter.
6) Fix possible double-free in nft_hash garbage collector due to unstable
walk interator that can provide twice the same element. Use a sequence
number to skip expired/dead elements that have been already scheduled
for removal. Based on patch from Laurent Fasnach
netfilter pull request 24-12-05
* tag 'nf-24-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_set_hash: skip duplicated elements pending gc run
netfilter: ipset: Hold module reference while requesting a module
netfilter: nft_inner: incorrect percpu area handling under softirq
netfilter: nft_socket: remove WARN_ON_ONCE on maximum cgroup level
netfilter: x_tables: fix LED ID check in led_tg_check()
ipvs: fix UB due to uninitialized stack access in ip_vs_protocol_init()
====================
Link: https://patch.msgid.link/20241205002854.162490-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When the power mode change is successful but the power mode hasn't
actually changed, the post notification was missed. Similar to the
approach with hibernate/clock scale/hce enable, having pre/post
notifications in the same function will make it easier to maintain.
Additionally, supplement the description of power parameters for the
pwr_change_notify callback.
Fixes: 7eb584db73 ("ufs: refactor configuring power mode")
Cc: stable@vger.kernel.org #6.11.x
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Link: https://lore.kernel.org/r/20241122024943.30589-1-peter.wang@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Softirq can interrupt ongoing packet from process context that is
walking over the percpu area that contains inner header offsets.
Disable bh and perform three checks before restoring the percpu inner
header offsets to validate that the percpu area is valid for this
skbuff:
1) If the NFT_PKTINFO_INNER_FULL flag is set on, then this skbuff
has already been parsed before for inner header fetching to
register.
2) Validate that the percpu area refers to this skbuff using the
skbuff pointer as a cookie. If there is a cookie mismatch, then
this skbuff needs to be parsed again.
3) Finally, validate if the percpu area refers to this tunnel type.
Only after these three checks the percpu area is restored to a on-stack
copy and bh is enabled again.
After inner header fetching, the on-stack copy is stored back to the
percpu area.
Fixes: 3a07327d10 ("netfilter: nft_inner: support for inner tunnel header matching")
Reported-by: syzbot+84d0441b9860f0d63285@syzkaller.appspotmail.com
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Be specific about what fields should be accessed in the idr result and
give other guidance to the VMM on how it should generate the
vIDR. Discussion on the list, and review of the qemu implementation
understood this needs to be clearer and more detailed.
Link: https://patch.msgid.link/r/0-v1-191e5e24cec3+3b0-iommufd_smmuv3_hwinf_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Commit cdd30ebb1b ("module: Convert symbol namespace to string
literal") only converted MODULE_IMPORT_NS() and EXPORT_SYMBOL_NS(),
leaving DEFAULT_SYMBOL_NAMESPACE as a macro expansion.
This commit converts DEFAULT_SYMBOL_NAMESPACE in the same way to avoid
annoyance for the default namespace as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix typos/spellos in kernel-doc comments for readability.
Fixes: aad37e71d5 ("iommufd: IOCTLs for the io_pagetable")
Fixes: b7a0855eb9 ("iommu: Add new flag to explictly request PASID capable domain")
Fixes: d68beb276b ("iommu/arm-smmu-v3: Support IOMMU_HWPT_INVALIDATE using a VIOMMU object")
Link: https://patch.msgid.link/r/20241128035159.374624-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Change the type of the res2 parameter in io_uring_cmd_done from ssize_t
to u64. This aligns the parameter type with io_req_set_cqe32_extra,
which expects u64 arguments.
The change eliminates potential issues on 32-bit architectures where
ssize_t might be 32-bit.
Only user of passing res2 is drivers/nvme/host/ioctl.c and it actually
passes u64.
Fixes: ee692a21e9 ("fs,io_uring: add infrastructure for uring-cmd")
Cc: stable@vger.kernel.org
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Tested-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Link: https://lore.kernel.org/r/20241203-io_uring_cmd_done-res2-as-u64-v2-1-5e59ae617151@ddn.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
core: add of based component probing
Some devices are designed and manufactured with some components having
multiple drop-in replacement options. These components are often
connected to the mainboard via ribbon cables, having the same signals
and pin assignments across all options. These may include the display
panel and touchscreen on laptops and tablets, and the trackpad on
laptops. Sometimes which component option is used in a particular device
can be detected by some firmware provided identifier, other times that
information is not available, and the kernel has to try to probe each
device.
Instead of a delicate dance between drivers and device tree quirks, this
change introduces a simple I2C component probe function. For a given
class of devices on the same I2C bus, it will go through all of them,
doing a simple I2C read transfer and see which one of them responds. It
will then enable the device that responds.
-----BEGIN PGP SIGNATURE-----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=MAxU
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c component probing support from Wolfram Sang:
"Add OF component probing.
Some devices are designed and manufactured with some components having
multiple drop-in replacement options. These components are often
connected to the mainboard via ribbon cables, having the same signals
and pin assignments across all options. These may include the display
panel and touchscreen on laptops and tablets, and the trackpad on
laptops. Sometimes which component option is used in a particular
device can be detected by some firmware provided identifier, other
times that information is not available, and the kernel has to try to
probe each device.
Instead of a delicate dance between drivers and device tree quirks,
this change introduces a simple I2C component probe function. For a
given class of devices on the same I2C bus, it will go through all of
them, doing a simple I2C read transfer and see which one of them
responds. It will then enable the device that responds"
* tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: fix typo in I2C OF COMPONENT PROBER
of: base: Document prefix argument for of_get_next_child_with_prefix()
i2c: Fix whitespace style issue
arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail
platform/chrome: Introduce device tree hardware prober
i2c: of-prober: Add GPIO support to simple helpers
i2c: of-prober: Add simple helpers for regulator support
i2c: Introduce OF component probe function
of: base: Add for_each_child_of_node_with_prefix()
of: dynamic: Add of_changeset_update_prop_string
- Remove unused bprintf() function
bprintf() was added with the rest of the "bin-printf" functions.
These are functions that are used by trace_printk() that allows to
quickly save the format and arguments into the ring buffer without
the expensive processing of converting numbers to ASCII. Then on
output, at a much later time, the ring buffer is read and the string
processing occurs then. The bprintf() was added for consistency but
was never used. It can be safely removed.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ0yNShQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qmJ6AP9i8pFOjeMfb2hOBpJTzORkIXEbz5nG
OCK/5aeSdjxy8QEAqafBSr5IQOxaTCFve1p7WSwdgmi2ZLmqEasaud0LmAk=
=5bp1
-----END PGP SIGNATURE-----
Merge tag 'trace-printf-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bprintf() removal from Steven Rostedt:
- Remove unused bprintf() function, that was added with the rest of the
"bin-printf" functions.
These are functions that are used by trace_printk() that allows to
quickly save the format and arguments into the ring buffer without
the expensive processing of converting numbers to ASCII. Then on
output, at a much later time, the ring buffer is read and the string
processing occurs then. The bprintf() was added for consistency but
was never used. It can be safely removed.
* tag 'trace-printf-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
printf: Remove unused 'bprintf'
