phydev <> netdev linking and lifecycle depends on rtnl_lock.
We want to switch to instance locks for most ethtool ops.
Let's add an assert that ops locked devices don't use phydev
today. If one does we can either opt the phy ops out of
being purely ops locked, or do deeper surgery to make phy
locking ops-compatible. I don't think there's any fundamental
challenge to make that work.
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260605002912.3456868-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sfp->i2c_block_size is only assigned in sfp_sm_mod_probe(), which runs
from the state machine timer after SFP_F_PRESENT has been set. Between
those two points, sfp_module_eeprom() (the ethtool -m callback) gates
only on SFP_F_PRESENT and can be entered with i2c_block_size still at
its kzalloc'd value of 0.
On a pure-I2C adapter, sfp_i2c_read() then issues an i2c_transfer()
with msgs[1].len = 0 inside a loop that subtracts this_len from len
each iteration; on adapters that succeed a zero-length read the loop
never advances, spinning while holding rtnl_lock.
This was previously addressed by initializing i2c_block_size in
sfp_alloc() (commit 813c2dd786), but the initialization was dropped
when i2c_block_size was split from i2c_max_block_size.
Initialize sfp->i2c_block_size from sfp->i2c_max_block_size in
sfp_i2c_configure(), so the field is valid as soon as the adapter is
known. sfp_sm_mod_probe() still reassigns it on each module insertion
to recover from a per-module clamp to 1 (sfp_id_needs_byte_io).
Fixes: 7662abf4db ("net: phy: sfp: Add support for SMBus module access")
Cc: stable@vger.kernel.org
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://patch.msgid.link/20260528205242.971410-2-jelonek.jonas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In some cases, the PHY can use an external ref clock source instead of a
crystal.
Add an optional clock in the PHY node to make sure that the clock source
is enabled, if specified, before probing.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260528184642.33424-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce a local pointer for device so devm_kzalloc() fit into
a single line. Also this makes following changes easier to read.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260528184642.33424-2-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "OEM"/"SFP-10G-T" quirk entry in sfp_fixup_rollball_cc()
unconditionally forces MDIO_I2C_ROLLBALL for all modules matching that
vendor/part-number combination. This works for modules that genuinely
implement a RollBall I2C-to-MDIO bridge, but silently breaks modules
that share the same EEPROM strings without having such a bridge.
The Realtek RTL8261BE-CG is one such module: a pure copper 10G SFP+
media converter with no I2C-to-MDIO bridge. Its EEPROM reports
vendor="OEM", part="SFP-10G-T-I", and -- critically -- Vendor OUI
00:00:00, making OUI-based differentiation impossible. With
MDIO_I2C_ROLLBALL forced, the module silently ACKs the unlock password
write, the MDIO bus is created, but no PHY responds; the SFP state
machine cycles through the RollBall PHY-probe retry window before
reporting no PHY.
Move the probe into i2c_mii_init_rollball() in mdio-i2c.c, where the
RollBall protocol constants are already defined. After sending the
unlock password, issue a CMD_READ and poll for CMD_DONE up to 200 ms
(10 x 20 ms, matching the existing rollball poll tolerance). A genuine
RollBall bridge asserts CMD_DONE within that window; modules without a
bridge never do, so i2c_mii_init_rollball() returns -ENODEV.
mdio_i2c_alloc() propagates -ENODEV to the caller to signal that no
bridge is present and PHY probing should be skipped.
sfp_sm_add_mdio_bus() catches -ENODEV and transitions
sfp->mdio_protocol to MDIO_I2C_NONE so the rest of the state machine
skips PHY probing for this module.
Any I2C-level error (NACK, timeout) during the probe is also treated as
-ENODEV: if the module does not respond at I2C address 0x51 at all,
there is certainly no RollBall bridge there, and SFP initialization
should not abort.
The probe writes are safe with respect to SFP EEPROM integrity: only
modules explicitly listed in the quirk table enter this path, and the
RollBall password unlock write to 0x51 was already issued by
i2c_mii_init_rollball() before the probe for all such modules. Any
module without a device at 0x51 NACKs the transfer and is treated as
-ENODEV.
Add "OEM"/"SFP-10G-T-I" to the quirk table so RTL8261BE modules enter
the probe path; genuine RollBall modules continue to work as before.
Signed-off-by: Petr Wozniak <petr.wozniak@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260527053909.2118-1-petr.wozniak@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To ensure that the Airoha AN8801R PHY uses the maximum available link
speed, an additional register write is needed to configure the function
mode for either 1G or 100M/10M operation after link detection.
So, in air_an8801 driver, implement a custom read_status callback, that
after genphy_read_status determines the link speed, sets the bit 0 of
the link mode register (REG_LINK_MODE) if the detected speed is 1Gbps,
or unsets it otherwise.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260526-add-airoha-an8801-support-v5-6-01aea8dee69b@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce a driver for the Airoha AN8801R Series Gigabit Ethernet
PHY; this currently supports setting up PHY LEDs, 10/100M, 1000M
speeds, and Wake on LAN and PHY interrupts.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260526-add-airoha-an8801-support-v5-5-01aea8dee69b@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename the BuckPBus register accessors functions present in air_phy_lib
and their calls in air_en8811h driver, so all exported functions start
with the same prefix.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://patch.msgid.link/20260526-add-airoha-an8801-support-v5-4-01aea8dee69b@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation of Airoha AN8801R PHY support, move the BuckPBus
register accessors and definitions, present in air_en8811h driver,
into the Airoha PHY shared code (air_phy_lib), so they will be usable
by the new driver without duplicating them.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://patch.msgid.link/20260526-add-airoha-an8801-support-v5-3-01aea8dee69b@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation of Airoha AN8801R PHY support, split out the interface
functions that will be common between the already present air_en8811h
driver and the new one, and put them into a new library named
air_phy_lib.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://patch.msgid.link/20260526-add-airoha-an8801-support-v5-2-01aea8dee69b@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some OEM-branded SFP modules are incorrectly detected as
1000Base-X and fail to establish link on 2.5G-capable ports.
These modules do not properly advertise 2500Base-X capability
in their EEPROM and require forcing the correct SerDes mode.
Add sfp_quirk_2500basex for:
- OEM SFP-2.5G-LH03-B
- OEM SFP-2.5G-LH20-A
Both modules report:
Vendor name: OEM
Vendor PN: SFP-2.5G-LH03-B / SFP-2.5G-LH20-A
Tested on OpenWrt with successful 2.5G link establishment.
Signed-off-by: Wei Qisen <weixiansen574@163.com>
Link: https://patch.msgid.link/20260526055206.1750-1-weixiansen574@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
AN8811HB needs a MCU soft-reset cycle before firmware loading begins.
Assert the MCU (hold it in reset) and immediately deassert (release)
via a dedicated PBUS register pair (0x5cf9f8 / 0x5cf9fc), accessed
through a registered mdio_device at PHY-addr+8.
Add __air_pbus_reg_write() as a low-level helper taking a struct
mdio_device *, create and register the PBUS mdio_device in
an8811hb_probe() and store it in priv->pbusdev, then implement
an8811hb_mcu_assert() / _deassert() on top of it. Add
an8811hb_remove() to unregister the PBUS device on teardown. Wire
both calls into an8811hb_load_firmware() and en8811h_restart_mcu()
so every firmware load or MCU restart on AN8811HB correctly sequences
the reset control registers.
Fixes: 5afda1d734 ("net: phy: air_en8811h: add Airoha AN8811HB support")
Signed-off-by: Lucien Jheng <lucienzx159@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260524063915.47961-1-lucienzx159@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for configuring swapping of MDI pairs (ABCD->DCBA) when the
property "enet-phy-pair-order" is specified.
Unfortunately, no documentation about this feature is available, but
this implementation still tries to avoid magic numbers and raw register
numbers where it seems clear what is going on.
As it is unknown whether the patching step can be safely reversed, only
enabling MDI swapping is fully supported. A value of "0" for the "enet-
phy-pair-order" property is not accepted if the PHY has already been
patched for MDI swapping (however, this should not occur in practice).
Some other Realtek PHYs also support similar mechanisms:
- RTL8221B-VB-CG allows to configure MDI swapping via the same register,
but does not need the additional patching step. However, it is unclear
whether a driver implementation for that PHY is necessary, as it is
known to support configuration via strapping pins (which is working
fine at least in Zyxel XGS1210-12 rev B1).
- The patching step seems to match the one for the integrated PHYs of
some Realtek PCIe/USB NICs (see for example the r8152 driver).
For now, only implement this for the RTL8226-CG PHY, where it is needed
for the switches Zyxel XGS1010-12 rev A1 and XGS1210-12 rev A1.
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Link: https://patch.msgid.link/20260516190456.387768-1-jan@3e8.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
phy_advertise_eee_all() copies supported_eee into advertising_eee
unconditionally, overwriting any filtering applied during phy_probe()
based on DT eee-broken-* properties or driver-populated
eee_disabled_modes. genphy_c45_ethtool_set_eee() calls this helper
when user space passes an empty advertisement, undoing the filtering.
Apply the same eee_disabled_modes mask in phy_advertise_eee_all() so
the filtering survives the copy, matching the pattern in phy_probe()
and phy_support_eee().
Fixes: b64691274f ("net: phy: add helper phy_advertise_eee_all")
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260518-devel-phy-support-eee-fix-v2-2-05b52626fa68@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
phy_support_eee() copies supported_eee into advertising_eee
unconditionally, overwriting any filtering applied during phy_probe()
based on DT eee-broken-* properties or driver-populated
eee_disabled_modes. MAC drivers that call phy_support_eee() after
probe (e.g. bcmgenet, fec, lan743x, lan78xx, r8169) then cause the PHY
to advertise EEE for modes the user marked as broken.
The symptom is that ethtool --show-eee on the local interface reports
"not supported" (supported & ~eee_disabled_modes is empty) while the
link partner sees EEE negotiated and active.
phy_probe() already filters advertising_eee via eee_disabled_modes
after calling of_set_phy_eee_broken(). Apply the same mask in
phy_support_eee() so the filtering survives the copy.
Fixes: 49168d1980 ("net: phy: Add phy_support_eee() indicating MAC support EEE")
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260518-devel-phy-support-eee-fix-v2-1-05b52626fa68@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
genphy_c45_an_config_eee_aneg() writes the EEE advertisement to the
auto-negotiation device's MMD register space (MDIO_MMD_AN, register
MDIO_AN_EEE_ADV). These registers are read by the link partner only
during auto-negotiation, so writing them while autoneg is disabled
cannot influence the link. On some PHYs (e.g. Broadcom BCM54213PE)
the write nevertheless reaches the chip and disturbs the receive
datapath.
Concretely, running
ethtool -s eth0 speed 100 duplex full autoneg off
ethtool --set-eee eth0 eee off
leaves eth0 with TX working and RX completely silent on a
Raspberry Pi 4 / CM4 board (bcmgenet + BCM54213PE in rgmii-rxid).
Switching back to autoneg recovers the link.
Prior to commit f26a29a038 ("net: phy: ensure that genphy_c45_an_config_eee_aneg() sees new value of phydev->eee_cfg.eee_enabled"),
the disable path was effectively a no-op because the helper read
the stale eee_cfg.eee_enabled, so the underlying PHY behavior never
surfaced.
Bisected on rpi-6.12.y between commits 83943264 (good) and
effcbc88 (bad) to f26a29a038.
Fixes: f26a29a038 ("net: phy: ensure that genphy_c45_an_config_eee_aneg() sees new value of phydev->eee_cfg.eee_enabled")
Cc: stable@vger.kernel.org
Signed-off-by: Nerijus Bendžiūnas <nerijus.bendziunas@gmail.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Tested-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260516150251.879680-1-nerijus.bendziunas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
At this time the driver is not listing any speeds
it supports. This should be ETHTOOL_LINK_MODE_100baseT1_Full_BIT
for DP83TC811. Add the missing call for phylib to read the abilities.
Fixes: b753a9faaf ("net: phy: DP83TC811: Introduce support for the DP83TC811 phy")
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Sven Schuchmann <schuchmann@schleissheimer.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260512071949.6218-1-schuchmann@schleissheimer.de
[pabeni@redhat.com: dropped revision history]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Report PCS receive error counts for all supported PEF 7061, 7071, 7072 and
xRX200 PHYs.
Accumulate the vendor-specific PHY_ERRCNT read-clear counter
(SEL=RXERR) in .update_stats() and expose it as both IEEE 802.3
SymbolErrorDuringCarrier and generic rx_errors via
.get_phy_stats().
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://patch.msgid.link/20260509205933.3965832-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Motorcomm PHY driver reads optional firmware properties via
of_property_read_*() from phydev->mdio.dev.of_node. This works for
Device Tree based systems, but causes ACPI platforms to ignore the same
properties when they are supplied through _DSD.
As a result, ACPI-described Motorcomm PHY devices fall back to default
settings instead of applying firmware-provided tuning such as
rx/tx internal delay, drive strength, clock output frequency, and
optional boolean controls like auto-sleep-disabled,
keep-pll-enabled, and tx clock inversion.
Switch these lookups to device_property_read_*() so the driver uses the
generic firmware node interface and can consume the same property names
from either Device Tree or ACPI.
This keeps the existing DT behavior unchanged while allowing ACPI
platforms to honor PHY configuration from firmware.
We have completed testing on Sophgo RISC-V architecture server SD3-10.
This server has a 64-core Thead C920 CPU whose DWMAC is connected to
Motorcomm's PHY YT8531. This server supports UEFI boot and it would like
to use the ACPI table.
Signed-off-by: chunzhi.lin <linchunzhi0@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260507040221.3679454-2-linchunzhi0@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethtool on this phy device always reports "MDI-X: Unknown" and doesn't
support forcing it to on or off.
This patch adds support for reading/forcing MDI-X mode from ethtool
properly.
Signed-off-by: Luca Ellero <l.ellero@asem.it>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260506141918.13136-1-l.ellero@asem.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The PHY counters can be lost if the PHY is reset during suspend. We
need to save the values into the shadow counters or the accounting
will be incorrect over multiple suspend and resume cycles.
Fixes: 820ee17b8d ("net: phy: broadcom: Add support code for reading PHY counters")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260505173926.2870069-1-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace magic number with register bit macros. The description of
the RTL8211B interrupt register is obtained from publicly available
datasheet (RTL8211B(L) Rev. 1.5 Datasheet)
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/20260502092857.156831-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Realtek RTL8221B Ethernet PHY supports three LED pins which are used to
indicate link status and activity. Add netdev trigger support for them.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260501100002.755672-1-amadeus@jmu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
LAN8814 QSGMII soft reset was moved into the probe function to avoid
triggering it for each of 4 PHY-s in the package.
However, that broke QSGMII link between the MAC and PHY on most LAN8814
PHY-s, specificaly for us on the Microchip LAN969x switch.
Reading the QSGMII status registers it was visible that lanes were only
partially synced.
It looks like the reset timing is crucial, so lets move the reset back
into the .config_init function but guard it with phy_package_init_once()
to avoid it being triggered on each of 4 PHY-s in the package.
Change the probe function to use phy_package_probe_once() for coma and PtP
setup.
Fixes: 96a9178a29 ("net: phy: micrel: lan8814 fix reset of the QSGMII interface")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Link: https://patch.msgid.link/20260428134138.1741253-1-robert.marko@sartura.hr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When configuring the link parameters in forced mode for the AQR-105, the
Extended Next Page bit gets advertised for Multi-Gigabit modes.
This is done through bit 12 of MDIO_AN_ADVERTISE in MDIO_MMD_AN. This
contains a copy of the MII_ADVERTISE, for which 802.3 defines bit 12 as
the Extended Next Page advertising. This bit used to be marked as
reserved, but a proper define for it was added in :
commit e7a62edd34 ("net: phy: qcom: at803x: Use the correct bit to disable extended next page")
Let's use it instead of the ADVERTISE_RESV definition, making the code
more self-documenting.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260428125827.238469-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Table 7-121 in datasheet says we have to set register 0xc6
to value 0x10 before CLK_O_SEL can be modified. No more infos
about this field found in datasheet. With this fix, setting
of CLK_O_SEL field in IO_MUX_CFG register worked through dts
property "ti,clk-output-sel" on a DP83869HMRGZR.
Signed-off-by: Heiko Schocher <hs@nabladev.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 01db923e83 ("net: phy: dp83869: Add TI dp83869 phy")
Link: https://patch.msgid.link/20260425031339.3318-1-hs@nabladev.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Core & protocols
----------------
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP.
- Number of code moves to help the compiler with inlining.
Avoid output arguments for returning drop reason where possible.
- Rework drop handling within qdiscs to include more metadata
about the reason and dropping qdisc in the tracepoints.
- Remove the rtnl_lock use from IP Multicast Routing.
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two.
- Report TCP delayed ack timer information via socket diag.
- Add ip_local_port_step_width sysctl to allow distributing the randomly
selected ports more evenly throughout the allowed space.
- Add support for per-route tunsrc in IPv6 segment routing.
- Start work of switching sockopt handling to iov_iter.
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up.
- Support MSG_EOR in MPTCP.
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage.
- Remove UDP-Lite support (as announced in 2023).
- Remove support for building IPv6 as a module.
Remove the now unnecessary function calling indirection.
Cross-tree stuff
----------------
- Move Michael MIC code from generic crypto into wireless,
it's considered insecure but some WiFi networks still need it.
Netfilter
---------
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate.
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex.
- Add more opinionated input validation to lower security exposure.
- Make IPVS hash tables to be per-netns and resizable.
Wireless
--------
- Finished assoc frame encryption/EPPKE/802.1X-over-auth.
- Radar detection improvements.
- Add 6 GHz incumbent signal detection APIs.
- Multi-link support for FILS, probe response templates and
client probing.
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware.
Driver API
----------
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs.
- Add standard counters for reporting pause storm events
(implement in mlx5 and fbnic).
- Add configuration API for completion writeback buffering
(implement in mana).
- Support driver-initiated change of RSS context sizes.
- Support DPLL monitoring input frequency (implement in zl3073x).
- Support per-port resources in devlink (implement in mlx5).
Misc
----
- Expand the YAML spec for Netfilter.
Drivers
-------
- Software:
- macvlan: support multicast rx for bridge ports with shared source
MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmnelNoACgkQMUZtbf5S
IrtWFw//WyiXuEiGawVQONnbu1dtR+3nw/cvNpSYi0IM66vbRUB9n+9fxm2MIyG4
4jI/c/X/fxIvUxEqGez3yPn5P7KqkQR8WRYwkxrMYKRpXeukN0IDk5Euew5DskCe
wtBKNJOQWKdKXff0bLQoJ9dHWYuJ2IMRVil5M3fhUbeUOXeyJD7Yn1w2ICvJAbj+
T/Hw7sEtchNaHp6h6SbaQfahkUFHQG5peNoETkZF4UDF6ALGY29WH91GXeO2lrgN
IxX203KtaavV0oU8T0oixZgOc57Ns081YfFL/F1JP2HV6lgkwhuq+zxCrRTi1c9M
HPTXgwD7Z80Y74nM3YTLrPfoMOP8GLBZgdV3rUpwmteM26+gMTm+O1zHUur5ZoGy
D6TaMFguPTIqiRyrARa9xY/J6r9TQkc2Wfu4bIuPndKFg8xPoepuEObODnh0+5Hg
4j4pdFhIo2huENhSg7kVb/yl+1q68SFwM3RqTmx+OhCa0AyjcKIKgt/UBhismdnG
r8obxzb+nXeJc2rRDuwNMwlBlcMSbep27uGt64zeHMMXVhTVqOoytNaL/X/ZpH2m
A0DscUrpHvb36IoDPtanc6irP+JOh5Xe7Nw5qhkgwsMc7hlf8SyyHB4OUBBaz1qA
ETSnHlfwklRmXSpWqH2LyGXjdOQpDKP46+h0W3dttMD2/cRBqYo=
=EhQZ
-----END PGP SIGNATURE-----
Merge tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP
- Number of code moves to help the compiler with inlining. Avoid
output arguments for returning drop reason where possible
- Rework drop handling within qdiscs to include more metadata about
the reason and dropping qdisc in the tracepoints
- Remove the rtnl_lock use from IP Multicast Routing
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two
- Report TCP delayed ack timer information via socket diag
- Add ip_local_port_step_width sysctl to allow distributing the
randomly selected ports more evenly throughout the allowed space
- Add support for per-route tunsrc in IPv6 segment routing
- Start work of switching sockopt handling to iov_iter
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up
- Support MSG_EOR in MPTCP
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage
- Remove UDP-Lite support (as announced in 2023)
- Remove support for building IPv6 as a module. Remove the now
unnecessary function calling indirection
Cross-tree stuff:
- Move Michael MIC code from generic crypto into wireless, it's
considered insecure but some WiFi networks still need it
Netfilter:
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex
- Add more opinionated input validation to lower security exposure
- Make IPVS hash tables to be per-netns and resizable
Wireless:
- Finished assoc frame encryption/EPPKE/802.1X-over-auth
- Radar detection improvements
- Add 6 GHz incumbent signal detection APIs
- Multi-link support for FILS, probe response templates and client
probing
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
Driver API:
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs
- Add standard counters for reporting pause storm events (implement
in mlx5 and fbnic)
- Add configuration API for completion writeback buffering (implement
in mana)
- Support driver-initiated change of RSS context sizes
- Support DPLL monitoring input frequency (implement in zl3073x)
- Support per-port resources in devlink (implement in mlx5)
Misc:
- Expand the YAML spec for Netfilter
Drivers
- Software:
- macvlan: support multicast rx for bridge ports with shared
source MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB
pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support"
* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wireguard: allowedips: remove redundant space
tools: ynl: add sample for wireguard
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
MAINTAINERS: Add netkit selftest files
selftests/net: Add additional test coverage in nk_qlease
selftests/net: Split netdevsim tests from HW tests in nk_qlease
tools/ynl: Make YnlFamily closeable as a context manager
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
net: airoha: Fix VIP configuration for AN7583 SoC
net: caif: clear client service pointer on teardown
net: strparser: fix skb_head leak in strp_abort_strp()
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
selftests/bpf: add test for xdp_master_redirect with bond not up
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
sctp: disable BH before calling udp_tunnel_xmit_skb()
sctp: fix missing encap_port propagation for GSO fragments
net: airoha: Rely on net_device pointer in ETS callbacks
...
Merge in late fixes in preparation for the net-next PR.
Conflicts:
include/net/sch_generic.h
a6bd339dbb ("net_sched: fix skb memory leak in deferred qdisc drops")
ff2998f29f ("net: sched: introduce qdisc-specific drop reason tracing")
https://lore.kernel.org/adz0iX85FHMz0HdO@sirena.org.uk
drivers/net/ethernet/airoha/airoha_eth.c
1acdfbdb51 ("net: airoha: Fix VIP configuration for AN7583 SoC")
bf3471e6e6 ("net: airoha: Make flow control source port mapping dependent on nbq parameter")
Adjacent changes:
drivers/net/ethernet/airoha/airoha_ppe.c
f44218cd5e ("net: airoha: Reset PPE cpu port configuration in airoha_ppe_hw_init()")
7da62262ec ("inet: add ip_local_port_step_width sysctl to improve port usage distribution")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- debugfs:
- Fix NULL pointer dereference in debugfs_create_str()
- Fix misplaced EXPORT_SYMBOL_GPL for debugfs_create_str()
- Fix soundwire debugfs NULL pointer dereference from uninitialized
firmware_file
- device property:
- Make fwnode flags modifications thread safe; widen the field to
unsigned long and use set_bit() / clear_bit() based accessors
- Document how to check for the property presence
- devres:
- Separate struct devres_node from its "subclasses" (struct devres,
struct devres_group); give struct devres_node its own release and
free callbacks for per-type dispatch
- Introduce struct devres_action for devres actions, avoiding the
ARCH_DMA_MINALIGN alignment overhead of struct devres
- Export struct devres_node and its init/add/remove/dbginfo
primitives for use by Rust Devres<T>
- Fix missing node debug info in devm_krealloc()
- Use guard(spinlock_irqsave) where applicable; consolidate unlock
paths in devres_release_group()
- driver_override:
- Convert PCI, WMI, vdpa, s390/cio, s390/ap, and fsl-mc to the
generic driver_override infrastructure, replacing per-bus
driver_override strings, sysfs attributes, and match logic; fixes
a potential UAF from unsynchronized access to driver_override in
bus match() callbacks
- Simplify __device_set_driver_override() logic
- kernfs:
- Send IN_DELETE_SELF and IN_IGNORED inotify events on kernfs
file and directory removal
- Add corresponding selftests for memcg
- platform:
- Allow attaching software nodes when creating platform devices via
a new 'swnode' field in struct platform_device_info
- Add kerneldoc for struct platform_device_info
- software node:
- Move software node initialization from postcore_initcall() to
driver_init(), making it available early in the boot process
- Move kernel_kobj initialization (ksysfs_init) earlier to support
the above
- Remove software_node_exit(); dead code in a built-in unit
- SoC:
- Introduce of_machine_read_compatible() and of_machine_read_model()
OF helpers and export soc_attr_read_machine() to replace direct
accesses to of_root from SoC drivers; also enables
CONFIG_COMPILE_TEST coverage for these drivers
- sysfs:
- Constify attribute group array pointers to
'const struct attribute_group *const *' in sysfs functions,
device_add_groups() / device_remove_groups(), and struct class
- Rust:
- Devres:
- Embed struct devres_node directly in Devres<T> instead of going
through devm_add_action(), avoiding the extra allocation and
the unnecessary ARCH_DMA_MINALIGN alignment
- I/O:
- Turn IoCapable from a marker trait into a functional trait
carrying the raw I/O accessor implementation (io_read /
io_write), providing working defaults for the per-type Io
methods
- Add RelaxedMmio wrapper type, making relaxed accessors usable
in code generic over the Io trait
- Remove overloaded per-type Io methods and per-backend macros
from Mmio and PCI ConfigSpace
- I/O (Register):
- Add IoLoc trait and generic read/write/update methods to the Io
trait, making I/O operations parameterizable by typed locations
- Add register! macro for defining hardware register types with
typed bitfield accessors backed by Bounded values; supports
direct, relative, and array register addressing
- Add write_reg() / try_write_reg() and LocatedRegister trait
- Update PCI sample driver to demonstrate the register! macro
Example:
```
register! {
/// UART control register.
CTRL(u32) @ 0x18 {
/// Receiver enable.
19:19 rx_enable => bool;
/// Parity configuration.
14:13 parity ?=> Parity;
}
/// FIFO watermark and counter register.
WATER(u32) @ 0x2c {
/// Number of datawords in the receive FIFO.
26:24 rx_count;
/// RX interrupt threshold.
17:16 rx_water;
}
}
impl WATER {
fn rx_above_watermark(&self) -> bool {
self.rx_count() > self.rx_water()
}
}
fn init(bar: &pci::Bar<BAR0_SIZE>) {
let water = WATER::zeroed()
.with_const_rx_water::<1>(); // > 3 would not compile
bar.write_reg(water);
let ctrl = CTRL::zeroed()
.with_parity(Parity::Even)
.with_rx_enable(true);
bar.write_reg(ctrl);
}
fn handle_rx(bar: &pci::Bar<BAR0_SIZE>) {
if bar.read(WATER).rx_above_watermark() {
// drain the FIFO
}
}
fn set_parity(bar: &pci::Bar<BAR0_SIZE>, parity: Parity) {
bar.update(CTRL, |r| r.with_parity(parity));
}
```
- IRQ:
- Move 'static bounds from where clauses to trait declarations
for IRQ handler traits
- Misc:
- Enable the generic_arg_infer Rust feature
- Extend Bounded with shift operations, single-bit bool conversion,
and const get()
- Misc:
- Make deferred_probe_timeout default a Kconfig option
- Drop auxiliary_dev_pm_ops; the PM core falls back to driver PM
callbacks when no bus type PM ops are set
- Add conditional guard support for device_lock()
- Add ksysfs.c to the DRIVER CORE MAINTAINERS entry
- Fix kernel-doc warnings in base.h
- Fix stale reference to memory_block_add_nid() in documentation
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCadl5SwAKCRBFlHeO1qrK
LpjDAQCSG3vYznwrngfpmRU5bCB9sdUy/pZiX5px1357+amJkwEA9LgIVQvtHAZW
ZXcQ7Jr+mR3mJEdlatbkWHp3w1VHqAQ=
=y1DV
-----END PGP SIGNATURE-----
Merge tag 'driver-core-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Fix NULL pointer dereference in debugfs_create_str()
- Fix misplaced EXPORT_SYMBOL_GPL for debugfs_create_str()
- Fix soundwire debugfs NULL pointer dereference from uninitialized
firmware_file
device property:
- Make fwnode flags modifications thread safe; widen the field to
unsigned long and use set_bit() / clear_bit() based accessors
- Document how to check for the property presence
devres:
- Separate struct devres_node from its "subclasses" (struct devres,
struct devres_group); give struct devres_node its own release and
free callbacks for per-type dispatch
- Introduce struct devres_action for devres actions, avoiding the
ARCH_DMA_MINALIGN alignment overhead of struct devres
- Export struct devres_node and its init/add/remove/dbginfo
primitives for use by Rust Devres<T>
- Fix missing node debug info in devm_krealloc()
- Use guard(spinlock_irqsave) where applicable; consolidate unlock
paths in devres_release_group()
driver_override:
- Convert PCI, WMI, vdpa, s390/cio, s390/ap, and fsl-mc to the
generic driver_override infrastructure, replacing per-bus
driver_override strings, sysfs attributes, and match logic; fixes a
potential UAF from unsynchronized access to driver_override in bus
match() callbacks
- Simplify __device_set_driver_override() logic
kernfs:
- Send IN_DELETE_SELF and IN_IGNORED inotify events on kernfs file
and directory removal
- Add corresponding selftests for memcg
platform:
- Allow attaching software nodes when creating platform devices via a
new 'swnode' field in struct platform_device_info
- Add kerneldoc for struct platform_device_info
software node:
- Move software node initialization from postcore_initcall() to
driver_init(), making it available early in the boot process
- Move kernel_kobj initialization (ksysfs_init) earlier to support
the above
- Remove software_node_exit(); dead code in a built-in unit
SoC:
- Introduce of_machine_read_compatible() and of_machine_read_model()
OF helpers and export soc_attr_read_machine() to replace direct
accesses to of_root from SoC drivers; also enables
CONFIG_COMPILE_TEST coverage for these drivers
sysfs:
- Constify attribute group array pointers to
'const struct attribute_group *const *' in sysfs functions,
device_add_groups() / device_remove_groups(), and struct class
Rust:
- Devres:
- Embed struct devres_node directly in Devres<T> instead of going
through devm_add_action(), avoiding the extra allocation and the
unnecessary ARCH_DMA_MINALIGN alignment
- I/O:
- Turn IoCapable from a marker trait into a functional trait
carrying the raw I/O accessor implementation (io_read /
io_write), providing working defaults for the per-type Io
methods
- Add RelaxedMmio wrapper type, making relaxed accessors usable in
code generic over the Io trait
- Remove overloaded per-type Io methods and per-backend macros
from Mmio and PCI ConfigSpace
- I/O (Register):
- Add IoLoc trait and generic read/write/update methods to the Io
trait, making I/O operations parameterizable by typed locations
- Add register! macro for defining hardware register types with
typed bitfield accessors backed by Bounded values; supports
direct, relative, and array register addressing
- Add write_reg() / try_write_reg() and LocatedRegister trait
- Update PCI sample driver to demonstrate the register! macro
Example:
```
register! {
/// UART control register.
CTRL(u32) @ 0x18 {
/// Receiver enable.
19:19 rx_enable => bool;
/// Parity configuration.
14:13 parity ?=> Parity;
}
/// FIFO watermark and counter register.
WATER(u32) @ 0x2c {
/// Number of datawords in the receive FIFO.
26:24 rx_count;
/// RX interrupt threshold.
17:16 rx_water;
}
}
impl WATER {
fn rx_above_watermark(&self) -> bool {
self.rx_count() > self.rx_water()
}
}
fn init(bar: &pci::Bar<BAR0_SIZE>) {
let water = WATER::zeroed()
.with_const_rx_water::<1>(); // > 3 would not compile
bar.write_reg(water);
let ctrl = CTRL::zeroed()
.with_parity(Parity::Even)
.with_rx_enable(true);
bar.write_reg(ctrl);
}
fn handle_rx(bar: &pci::Bar<BAR0_SIZE>) {
if bar.read(WATER).rx_above_watermark() {
// drain the FIFO
}
}
fn set_parity(bar: &pci::Bar<BAR0_SIZE>, parity: Parity) {
bar.update(CTRL, |r| r.with_parity(parity));
}
```
- IRQ:
- Move 'static bounds from where clauses to trait declarations for
IRQ handler traits
- Misc:
- Enable the generic_arg_infer Rust feature
- Extend Bounded with shift operations, single-bit bool
conversion, and const get()
Misc:
- Make deferred_probe_timeout default a Kconfig option
- Drop auxiliary_dev_pm_ops; the PM core falls back to driver PM
callbacks when no bus type PM ops are set
- Add conditional guard support for device_lock()
- Add ksysfs.c to the DRIVER CORE MAINTAINERS entry
- Fix kernel-doc warnings in base.h
- Fix stale reference to memory_block_add_nid() in documentation"
* tag 'driver-core-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (67 commits)
bus: fsl-mc: use generic driver_override infrastructure
s390/ap: use generic driver_override infrastructure
s390/cio: use generic driver_override infrastructure
vdpa: use generic driver_override infrastructure
platform/wmi: use generic driver_override infrastructure
PCI: use generic driver_override infrastructure
driver core: make software nodes available earlier
software node: remove software_node_exit()
kernel: ksysfs: initialize kernel_kobj earlier
MAINTAINERS: add ksysfs.c to the DRIVER CORE entry
drivers/base/memory: fix stale reference to memory_block_add_nid()
device property: Document how to check for the property presence
soundwire: debugfs: initialize firmware_file to empty string
debugfs: fix placement of EXPORT_SYMBOL_GPL for debugfs_create_str()
debugfs: check for NULL pointer in debugfs_create_str()
driver core: Make deferred_probe_timeout default a Kconfig option
driver core: simplify __device_set_driver_override() clearing logic
driver core: auxiliary bus: Drop auxiliary_dev_pm_ops
device property: Make modifications of fwnode "flags" thread safe
rust: devres: embed struct devres_node directly
...
Replace the magic number with an existing define for the LEDCR
register page number on the RTL8211F.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/20260411105150.184577-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As noted in the blamed commit, the AR8035 and other PHYs from this
family advertise the Extended Next Page support by default, which may be
understood by some partners as this PHY being multi-gig capable.
The fix is to disable XNP advertising, which is done by setting bit 12
of the Auto-Negotiation Advertisement Register (MII_ADVERTISE).
The blamed commit incorrectly uses MDIO_AN_CTRL1_XNP, which is bit 13 as per
802.3 : 45.2.7.1 AN control register (Register 7.0)
BIT 12 in MII_ADVERTISE is wrapped by ADVERTISE_RESV, used by some
drivers such as the aquantia one. 802.3 Clause 28 defines bit 12 as
Extended Next Page ability, at least in recent versions of the standard.
Let's add a define for it and use it in the at803x driver.
Fixes: 3c51fa5d2a ("net: phy: ar803x: disable extended next page bit")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260410171021.1277138-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MDIO bus controllers are not required to wait for write transactions to
complete before returning as synchronization is often achieved by polling
status bits.
This can cause issues when disabling interrupts since an interrupt could
fire before the interrupt handler is unregistered and there's no status
bit to poll.
Add a phy_write_barrier() function and use it in phy_disable_interrupts()
to fix this issue. The write barrier just reads an MII register and
discards the value, which is enough to guarantee that previous writes have
completed.
Signed-off-by: Charles Perry <charles.perry@microchip.com>
Link: https://patch.msgid.link/20260408131821.1145334-4-charles.perry@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The return value of phy_c45_probe_present() is stored in "ret", not
"phy_reg", fix this. "phy_reg" always has a positive value if we reach
this return path (since it would have returned earlier otherwise), which
means that the original goal of the patch of not considering -ENODEV
fatal wasn't achieved.
Fixes: 17b4475394 ("net: phy: c45 scanning: Don't consider -ENODEV fatal")
Signed-off-by: Charles Perry <charles.perry@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260409133654.3203336-1-charles.perry@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RTL8211F previously unconditionally disabled PHY-mode EEE in
config_init. Convert this to use the new .disable_autonomous_eee
callback so it is only disabled when the MAC indicates EEE support
via phy_support_eee().
This preserves PHY-autonomous EEE for MACs that do not support EEE,
while still disabling it when the MAC manages LPI.
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260406-devel-autonomous-eee-v1-3-b335e7143711@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the .disable_autonomous_eee callback for the BCM54210E.
In AutogrEEEn mode the PHY manages EEE autonomously. Clearing the
AutogrEEEn enable bit in MII_BUF_CNTL_0 switches the PHY to Native
EEE mode.
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260406-devel-autonomous-eee-v1-2-b335e7143711@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some PHYs (e.g. Broadcom BCM54xx, Realtek RTL8211F) implement
autonomous EEE where the PHY manages LPI signaling without forwarding
it to the MAC. This conflicts with MAC drivers that implement their own
LPI control.
Add a .disable_autonomous_eee callback to struct phy_driver and call it
from phy_support_eee(). When a MAC driver indicates it supports EEE via
phy_support_eee(), the PHY's autonomous EEE is automatically disabled so
the MAC can manage LPI entry/exit.
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260406-devel-autonomous-eee-v1-1-b335e7143711@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for spread spectrum clocking (SSC) on RTL8211F(D)(I)-CG,
RTL8211FS(I)(-VS)-CG, RTL8211FG(I)(-VS)-CG PHYs. The implementation
follows EMI improvement application note Rev. 1.2 for these PHYs.
The current implementation enables SSC for both RXC and SYSCLK clock
signals. Introduce DT properties 'realtek,clkout-ssc-enable',
'realtek,rxc-ssc-enable' and 'realtek,sysclk-ssc-enable' which control
CLKOUT, RXC and SYSCLK SSC spread spectrum clocking enablement on these
signals.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Link: https://patch.msgid.link/20260405233008.148974-3-marek.vasut@mailbox.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace the magic numbers with defines. Register names were obtained from
publicly available documentation[1]. This should make it clear what's going
on in the code.
1. RTL8201F/RTL8201FL/RTL8201FN Rev. 1.4 Datasheet
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Nicolai Buchwitz nb@tipi-net.de
Link: https://patch.msgid.link/20260406201222.1043396-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Several GPON ONT SFP sticks based on Realtek RTL960x report
1000BASE-LX at 1300MBd in their EEPROM but can operate at 2500base-X.
On hosts capable of 2500base-X (e.g. Banana Pi R3 / MT7986), the
kernel negotiates only 1G because it trusts the incorrect EEPROM data.
Add quirks for:
- Hisense-Leox LXT-010S-H
- Hisense ZNID-GPON-2311NA
- HSGQ HSGQ-XPON-Stick
Each quirk advertises 2500base-X and ignores TX_FAULT during the
module's ~40s Linux boot time.
Tested on Banana Pi R3 (MT7986) with OpenWrt 25.12.1, confirmed
2.5Gbps link and full throughput with flow offloading.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Suggested-by: Marcin Nita <marcin.nita@leolabs.pl>
Signed-off-by: John Pavlick <jspavlick@posteo.net>
Link: https://patch.msgid.link/20260406132321.72563-1-jspavlick@posteo.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable auto-downshift from 1000BASE-T to 100BASE-TX after 2 failed
auto-negotiation attempts by default. This ensures that links with
faulty or missing cable pairs (C and D) fall back to 100Mbps without
requiring userspace configuration.
The downshift count is stored in the driver's private data and applied
in config_init, so user changes via ethtool are preserved across
suspend/resume cycles.
Users can override or disable downshift at runtime:
ethtool --set-phy-tunable eth0 downshift off
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260401123848.696766-3-nb@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement the standard ETHTOOL_PHY_DOWNSHIFT tunable for the LAN88xx
PHY. This allows runtime configuration of the auto-downshift feature
via ethtool:
ethtool --set-phy-tunable eth0 downshift on count 3
The LAN88xx PHY supports downshifting from 1000BASE-T to 100BASE-TX
after 2-5 failed auto-negotiation attempts. Valid count values are
2, 3, 4 and 5.
This is based on an earlier downstream implementation by Phil Elwell.
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260401123848.696766-2-nb@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Expose LED1 and LED2 pins via the PHY LED framework. Each pin has a
source mask (MASK_LOW + MASK_EXT registers) selecting which hardware
events light it, plus a CTL field in the shared 0xA83B register
(RMW; LED4 is firmware-controlled per the datasheet).
Hardware can offload per-speed link triggers (1000/2500/5000/10000),
RX/TX activity, and force-on. LINK_100 is accepted only alongside
LINK_1000: source bit 4 lights at both speeds and 100-alone isn't
representable, so the unrepresentable case falls to software.
The chip has five LED pins; only LED1/LED2 are exposed here as those
are the only ones characterized on tested hardware. LED4 is firmware-
controlled regardless of strap configuration.
Tested on TRENDnet TEG-S750 (LED1/LED2 wired to an antiparallel
bicolor LED): brightness_set via sysfs; netdev trigger offloaded=1
with amber lit at 100M/1G/2.5G and green lit at 10G via respective
link_* modes; LED off immediately on cable unplug with no software
involvement.
Signed-off-by: Daniel Wagner <wagner.daniel.t@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260401114931.3091818-1-wagner.daniel.t@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
