Set the attrs and allow to expose port flavour to user via devlink.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Each driver implements physical port name generation by itself. However
as devlink has all needed info, it can easily do the job for all its
users. So implement this helper in devlink.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Devlink ports can have specific flavour according to the purpose of use.
This patch extend attrs_set so the driver can say which flavour port
has. Initial flavours are:
physical, cpu, dsa
User can query this to see right away what is the purpose of each port.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change existing setter for split port information into more generic
attrs setter. Alongside with that, allow to set port number and subport
number for split ports.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Hyper-V APIC code is built when CONFIG_HYPERV is enabled but the actual
code in that file is guarded with CONFIG_X86_64. There is no point in doing
this. Neither is there a point in having the CONFIG_HYPERV guard in there
because the containing directory is not built when CONFIG_HYPERV=n.
Further for the hv_init_apic() function a stub is provided only for
CONFIG_HYPERV=n, which is pointless as the callsite is not compiled at
all. But for X86_32 the stub is missing and the build fails.
Clean that up:
- Compile hv_apic.c only when CONFIG_X86_64=y
- Make the stub for hv_init_apic() available when CONFG_X86_64=n
Fixes: 6b48cb5f83 ("X86/Hyper-V: Enlighten APIC access")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Commit 7771c66457 ("signal/arm: Document conflicts with SI_USER and
SIGFPE") broke the siginfo structure for userspace triggered signals,
causing the strace testsuite to regress. Fix this by eliminating
the FPE_FIXME definition (which is at the root of the breakage) and
use FPE_FLTINV instead for the case where the hardware appears to be
reporting nonsense.
Fixes: 7771c66457 ("signal/arm: Document conflicts with SI_USER and SIGFPE")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Commit be83bbf806 ("mmap: introduce sane default mmap limits") was
introduced to catch problems in various ad-hoc character device drivers
doing mmap and getting the size limits wrong. In the process, it used
"known good" limits for the normal cases of mapping regular files and
block device drivers.
It turns out that the "s_maxbytes" limit was less "known good" than I
thought. In particular, /proc doesn't set it, but exposes one regular
file to mmap: /proc/vmcore. As a result, that file got limited to the
default MAX_INT s_maxbytes value.
This went unnoticed for a while, because apparently the only thing that
needs it is the s390 kernel zfcpdump, but there might be other tools
that use this too.
Vasily suggested just changing s_maxbytes for all of /proc, which isn't
wrong, but makes me nervous at this stage. So instead, just make the
new mmap limit always be MAX_LFS_FILESIZE for regular files, which won't
affect anything else. It wasn't the regular file case I was worried
about.
I'd really prefer for maxsize to have been per-inode, but that is not
how things are today.
Fixes: be83bbf806 ("mmap: introduce sane default mmap limits")
Reported-by: Vasily Gorbik <gor@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Not all configurations magically include asm/apic.h, but the Hyper-V code
requires it. Include it explicitely.
Fixes: 6b48cb5f83 ("X86/Hyper-V: Enlighten APIC access")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Michael Kelley <mikelley@microsoft.com>
We used rdmsr_safe_on_cpu() to make sure we're reading the proper CPU's
MISC block addresses. However, that caused trouble with CPU hotplug due to
the _on_cpu() helper issuing an IPI while IRQs are disabled.
But we don't have to do that: the block addresses are the same on any CPU
so we can read them on any CPU. (What practically happens is, we read them
on the BSP and cache them, and for later reads, we service them from the
cache).
Suggested-by: Yazen Ghannam <Yazen.Ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
... into a global, two-dimensional array and service subsequent reads from
that cache to avoid rdmsr_on_cpu() calls during CPU hotplug (IPIs with IRQs
disabled).
In addition, this fixes a KASAN slab-out-of-bounds read due to wrong usage
of the bank->blocks pointer.
Fixes: 27bd595027 ("x86/mce/AMD: Get address from already initialized block")
Reported-by: Johannes Hirte <johannes.hirte@datenkhaos.de>
Tested-by: Johannes Hirte <johannes.hirte@datenkhaos.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Yazen Ghannam <yazen.ghannam@amd.com>
Link: http://lkml.kernel.org/r/20180414004230.GA2033@probook
The x86 platform operations are fairly isolated, so it's easy to change
them from using timespec to timespec64. It has been checked that all the
users and callers are safe, and there is only one critical function that is
broken beyond 2106:
pvclock_read_wallclock() uses a 32-bit number of seconds since the epoch
to communicate the boot time between host and guest in a virtual
environment. This will work until 2106, but fixing this is outside the
scope of this change, Add a comment at least.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Radim Krčmář <rkrcmar@redhat.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: jailhouse-dev@googlegroups.com
Cc: Borislav Petkov <bp@suse.de>
Cc: kvm@vger.kernel.org
Cc: y2038@lists.linaro.org
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: xen-devel@lists.xenproject.org
Cc: John Stultz <john.stultz@linaro.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Link: https://lkml.kernel.org/r/20180427201435.3194219-1-arnd@arndb.de
The set of APIs we provide has a few holes for coarse times, e.g. we
provide ktime_get_coarse_boottime() and ktime_get_boottime_ts64(),
but not the combination of the two.
This adds four new functions:
ktime_get_coarse_boottime_ts64()
ktime_get_boottime_seconds()
ktime_get_coarse_clocktai_ts64()
ktime_get_clocktai_seconds()
to fill in some of the missing pieces. I have missed only the
ktime_get_boottime_seconds() accessor in a few occasions in
the past, but it seems better to just provide all four together,
as there is very little cost to having them.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: y2038@lists.linaro.org
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/20180427134016.2525989-6-arnd@arndb.de
I have run into a couple of drivers using current_kernel_time()
suffering from the y2038 problem, and they could be converted
to using ktime_t, but don't have interfaces that skip the nanosecond
calculation at the moment.
This introduces ktime_get_coarse_with_offset() as a simpler
variant of ktime_get_with_offset(), and adds wrappers for the
three time domains we support with the existing function.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: y2038@lists.linaro.org
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/20180427134016.2525989-5-arnd@arndb.de
The current_kernel_time64, get_monotonic_coarse64, getrawmonotonic64,
get_monotonic_boottime64 and timekeeping_clocktai64 interfaces have
rather inconsistent naming, and they differ in the calling conventions
by passing the output either by reference or as a return value.
Rename them to ktime_get_coarse_real_ts64, ktime_get_coarse_ts64,
ktime_get_raw_ts64, ktime_get_boottime_ts64 and ktime_get_clocktai_ts64
respectively, and provide the interfaces with macros or inline
functions as needed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: y2038@lists.linaro.org
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/20180427134016.2525989-4-arnd@arndb.de
In a move to make ktime_get_*() the preferred driver interface into the
timekeeping code, sanitizes ktime_get_real_ts64() to be a proper exported
symbol rather than an alias for getnstimeofday64().
The internal __getnstimeofday64() is no longer used, so remove that
and merge it into ktime_get_real_ts64().
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: y2038@lists.linaro.org
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/20180427134016.2525989-3-arnd@arndb.de
At this point, we have converted most of the kernel to use timespec64
consistently in place of timespec, so it seems it's time to make
timespec64 the native structure and define timespec in terms of that
one on 64-bit architectures.
Starting with gcc-5, the compiler can completely optimize away the
timespec_to_timespec64 and timespec64_to_timespec functions on 64-bit
architectures. With older compilers, we introduce a couple of extra
copies of local variables, but those are easily avoided by using
the timespec64 based interfaces consistently, as we do in most of the
important code paths already.
The main upside of removing the hack is that printing the tv_sec
field of a timespec64 structure can now use the %lld format
string on all architectures without a cast to time64_t. Without
this patch, the field is a 'long' type and would have to be printed
using %ld on 64-bit architectures.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: y2038@lists.linaro.org
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/20180427134016.2525989-2-arnd@arndb.de
- Record min/max LBR cycles (>= skylake) and add 'perf annotate' TUI
hotkey to show it (c) (Jin Yao)
- Fix machine->kernel_start for PTI on x86 (Adrian Hunter)
- Make machine->env->arch always available, e.g. in 'perf top', not
just when reading that info from perf.data files (Adrian Hunter)
- Reduce the number of files read at 'perf' start, leaving information such as
cacheline size, tracefs mount point determination, max_stack, etc, to be
lazily read as tools needs then (Arnaldo Carvalho de Melo)
- Fixup BPF include and examples install messages (Arnaldo Carvalho de Melo)
- Fixup callchain addresses and symbol offsets in 'perf script', to help
correlating with objdump output (Sandipan Das)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----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=RER4
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.18-20180519' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
- Record min/max LBR cycles (>= Skylake) and add 'perf annotate' TUI
hotkey to show it (c) (Jin Yao)
- Fix machine->kernel_start for PTI on x86 (Adrian Hunter)
- Make machine->env->arch always available, e.g. in 'perf top', not
just when reading that info from perf.data files (Adrian Hunter)
- Reduce the number of files read at 'perf' start, leaving information such as
cacheline size, tracefs mount point determination, max_stack, etc, to be
lazily read as tools needs then (Arnaldo Carvalho de Melo)
- Fix up BPF include and examples install messages (Arnaldo Carvalho de Melo)
- Fix up callchain addresses and symbol offsets in 'perf script', to help
correlating with objdump output (Sandipan Das)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
mba_sc is a feedback loop where we periodically read MBM counters and
try to restrict the bandwidth below a max value so the below is always
true:
"current bandwidth(cur_bw) < user specified bandwidth(user_bw)"
The frequency of these checks is currently 1s and we just tag along the
MBM overflow timer to do the updates. Doing it once in a second also
makes the calculation of bandwidth easy. The steps of increase or
decrease of bandwidth is the minimum granularity specified by the
hardware.
Although the MBA's goal is to restrict the bandwidth below a maximum,
there may be a need to even increase the bandwidth. Since MBA controls
the L2 external bandwidth where as MBM measures the L3 external
bandwidth, we may end up restricting some rdtgroups unnecessarily. This
may happen in the sequence where rdtgroup (set of jobs) had high
"L3 <-> memory traffic" in initial phases -> mba_sc kicks in and reduced
bandwidth percentage values -> but after some it has mostly "L2 <-> L3"
traffic. In this scenario mba_sc increases the bandwidth percentage when
there is lesser memory traffic.
Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com
Cc: ak@linux.intel.com
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/1524263781-14267-7-git-send-email-vikas.shivappa@linux.intel.com
When MBA software controller is enabled, a per domain storage is required
for user specified bandwidth in "MBps" and the "percentage" values which
are programmed into the IA32_MBA_THRTL_MSR. Add support for these data
structures and initialization.
The MBA percentage values have a default max value of 100 but however the
max value in MBps is not available from the hardware so it's set to
U32_MAX.
This simply says that the control group can use all bandwidth by default
but does not say what is the actual max bandwidth available. The actual
bandwidth that is available may depend on lot of factors like QPI link,
number of memory channels, memory channel frequency, its width and memory
speed, how many channels are configured and also if memory interleaving is
enabled. So there is no way to determine the maximum at runtime reliably.
Signed-off-by: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: ravi.v.shankar@intel.com
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: vikas.shivappa@intel.com
Cc: ak@linux.intel.com
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/1524263781-14267-4-git-send-email-vikas.shivappa@linux.intel.com
VMLINUX_SYMBOL() is no-op unless CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX
is defined. It has ever been selected only by BLACKFIN and METAG.
VMLINUX_SYMBOL() is unneeded for ARM-specific code.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
This patch is provided in the context of allowing the Coresight driver
subsystem to be loaded as modules. Coresight uses amba_bus in its call
to bus_find_device() in of_coresight_get_endpoint_device() when
searching for a configurable endpoint device. This patch allows
Coresight to reference amba_bustype when built as a module.
[original LKML submission here: https://lkml.org/lkml/2018/5/9/520]
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Todd Kjos <tkjos@google.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Thierry Reding <treding@nvidia.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Some users of get_user use the macro with an argument p which
is already specified as static. When using clang this leads to
a duplicate specifier:
CC arch/arm/kernel/process.o
In file included from init/do_mounts.c:15:
In file included from ./include/linux/tty.h:7:
In file included from ./include/uapi/linux/termios.h:6:
In file included from ./arch/arm/include/generated/uapi/asm/termios.h:1:
./include/asm-generic/termios.h:25:6: warning: duplicate 'const' declaration
specifier [-Wduplicate-decl-specifier]
if (get_user(tmp, &termio->c_iflag) < 0)
^
./arch/arm/include/asm/uaccess.h:195:3: note: expanded from macro 'get_user'
__get_user_check(x, p);
^
./arch/arm/include/asm/uaccess.h:155:12: note: expanded from macro
'__get_user_check'
register const typeof(*(p)) __user *__p asm("r0") = (p);
Remove the const attribute from the register declaration
to avoid the duplicate const specifier. In a test with ptrace.c
and traps.c (both using get_user with non-const arguments for p)
the generated code was exactly the same.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Use cc-options call for compiler options which are not available
in clang. With this patch an ARMv7 multi platform kernel can be
successfully build using clang (tested with version 5.0.1).
Based-on-patches-by: Behan Webster <behanw@converseincode.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
According to GCC documentation -m(no-)thumb-interwork is
meaningless in AAPCS configurations. Also clang does not
support the flag:
clang-5.0: error: unknown argument: '-mno-thumb-interwork'
Just drop -mno-thumb-interwork in AEABI configuration.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Suspending a CPU on a RT kernel results in the following backtrace:
| Disabling non-boot CPUs ...
| BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917
| in_atomic(): 1, irqs_disabled(): 128, pid: 18, name: migration/1
| INFO: lockdep is turned off.
| irq event stamp: 122
| hardirqs last enabled at (121): [<c06ac0ac>] _raw_spin_unlock_irqrestore+0x88/0x90
| hardirqs last disabled at (122): [<c06abed0>] _raw_spin_lock_irq+0x28/0x5c
| CPU: 1 PID: 18 Comm: migration/1 Tainted: G W 4.1.4-rt3-01046-g96ac8da #204
| Hardware name: Generic DRA74X (Flattened Device Tree)
| [<c0019134>] (unwind_backtrace) from [<c0014774>] (show_stack+0x20/0x24)
| [<c0014774>] (show_stack) from [<c06a70f4>] (dump_stack+0x88/0xdc)
| [<c06a70f4>] (dump_stack) from [<c006cab8>] (___might_sleep+0x198/0x2a8)
| [<c006cab8>] (___might_sleep) from [<c06ac4dc>] (rt_spin_lock+0x30/0x70)
| [<c06ac4dc>] (rt_spin_lock) from [<c013f790>] (find_lock_task_mm+0x9c/0x174)
| [<c013f790>] (find_lock_task_mm) from [<c00409ac>] (clear_tasks_mm_cpumask+0xb4/0x1ac)
| [<c00409ac>] (clear_tasks_mm_cpumask) from [<c00166a4>] (__cpu_disable+0x98/0xbc)
| [<c00166a4>] (__cpu_disable) from [<c06a2e8c>] (take_cpu_down+0x1c/0x50)
| [<c06a2e8c>] (take_cpu_down) from [<c00f2600>] (multi_cpu_stop+0x11c/0x158)
| [<c00f2600>] (multi_cpu_stop) from [<c00f2a9c>] (cpu_stopper_thread+0xc4/0x184)
| [<c00f2a9c>] (cpu_stopper_thread) from [<c0069058>] (smpboot_thread_fn+0x18c/0x324)
| [<c0069058>] (smpboot_thread_fn) from [<c00649c4>] (kthread+0xe8/0x104)
| [<c00649c4>] (kthread) from [<c0010058>] (ret_from_fork+0x14/0x3c)
| CPU1: shutdown
The root cause of above backtrace is task_lock() which takes a sleeping
lock on -RT.
To fix the issue, move clear_tasks_mm_cpumask() call from __cpu_disable()
to __cpu_die() which is called on the thread which is asking for a target
CPU to be shutdown. In addition, this change restores CPU hotplug
functionality on ARM CPU1 can be unplugged/plugged many times.
Link: http://lkml.kernel.org/r/1441995683-30817-1-git-send-email-grygorii.strashko@ti.com
[bigeasy: slighty edited the commit message]
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
NUMREGBYTES (which is used as the size for gdb_regs[]) is incorrectly
based on DBG_MAX_REG_NUM instead of GDB_MAX_REGS. DBG_MAX_REG_NUM
is the number of total registers, while GDB_MAX_REGS is the number
of 'unsigned longs' it takes to serialize those registers. Since
FP registers require 3 'unsigned longs' each, DBG_MAX_REG_NUM is
smaller than GDB_MAX_REGS.
This causes GDB 8.0 give the following error on connect:
"Truncated register 19 in remote 'g' packet"
This also causes the register serialization/deserialization logic
to overflow gdb_regs[], overwriting whatever follows.
Fixes: 834b2964b7 ("kgdb,arm: fix register dump")
Cc: <stable@vger.kernel.org> # 2.6.37+
Signed-off-by: David Rivshin <drivshin@allworx.com>
Acked-by: Rabin Vincent <rabin@rab.in>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Use vma_pages() function instead of open coding it.
Generated by scripts/coccinelle/api/vma_pages.cocci.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
ARMv8R/M architecture defines new memory protection scheme - PMSAv8
which is not compatible with PMSAv7.
Key differences to PMSAv7 are:
- Region geometry is defined by base and limit addresses
- Addresses need to be either 32 or 64 byte aligned
- No region priority due to overlapping regions are not allowed
- It is unified, i.e. no distinction between data/instruction regions
- Memory attributes are controlled via MAIR
This patch implements support for PMSAv8 MPU defined by ARMv8R/M
architecture.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
This patch postpone MPU activation till __after_proc_init (which is
placed in .text section) rather than doing it in __setup_mpu. It
allows us ignore used-only-once .head.text section while programming
PMSAv8 MPU (for PMSAv7 it stays covered anyway).
Tested-by: Szemz? András <sza@esh.hu>
Tested-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Currently, we have mixed code placement between .head.text and .text
depends on configuration we are building:
_text M R(UP) R(SMP)
======================================================
__setup_mpu __HEAD __HEAD text
__after_proc_init __HEAD __HEAD text
__mmap_switched text text text
We are going to support another variant of MPU which is different to
PMSAv7 in sense overlapping MPU regions are not allowed, so this patch
makes boundaries between these sections precise and consistent:
_text M R(UP) R(SMP)
======================================================
__setup_mpu __HEAD __HEAD __HEAD
__after_proc_init text text text
__mmap_switched text text text
Additionally, it paves a path to postpone MPU activation till
__after_proc_init where we do set SCTLR anyway and can return
directly to __mmap_switched.
Tested-by: Szemz? András <sza@esh.hu>
Tested-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
We are going to support different MPU which programming model is not
compatible to PMSAv7, so move PMSAv7 MPU under it's own namespace.
Tested-by: Szemz? András <sza@esh.hu>
Tested-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
While testing multi_v7_defconfig with config fragments that makes the
kernel size to grow. The kernel fails to load simple modules, as
reported by kselftest:
[ 34.107620] test_printf: section 4 reloc 2 sym 'memset': relocation
28 out of range (0xbf046044 -> 0xc109f720)
selftests: printf.sh [FAIL]
The problem that is seen when enabling too much in the kernel without
enabling ARM_MODULE_PLTS, is that the top of the kernel gets out of
reach from the bottom of the module area.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Since do_undefinstr() uses get_user to get the undefined
instruction, it can be called before kprobes processes
recursive check. This can cause an infinit recursive
exception.
Prohibit probing on get_user functions.
Fixes: 24ba613c9d ("ARM kprobes: core code")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Prohibit kprobes on do_undefinstr because kprobes on
arm is implemented by undefined instruction. This means
if we probe do_undefinstr(), it can cause infinit
recursive exception.
Fixes: 24ba613c9d ("ARM kprobes: core code")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Prohibit probing on optimized_callback() because
it is called from kprobes itself. If we put a kprobes
on it, that will cause a recursive call loop.
Mark it NOKPROBE_SYMBOL.
Fixes: 0dc016dbd8 ("ARM: kprobes: enable OPTPROBES for ARM 32")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Since get_kprobe_ctlblk() uses smp_processor_id() to access
per-cpu variable, it hits smp_processor_id sanity check as below.
[ 7.006928] BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
[ 7.007859] caller is debug_smp_processor_id+0x20/0x24
[ 7.008438] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1-00192-g4eb17253e4b5 #1
[ 7.008890] Hardware name: Generic DT based system
[ 7.009917] [<c0313f0c>] (unwind_backtrace) from [<c030e6d8>] (show_stack+0x20/0x24)
[ 7.010473] [<c030e6d8>] (show_stack) from [<c0c64694>] (dump_stack+0x84/0x98)
[ 7.010990] [<c0c64694>] (dump_stack) from [<c071ca5c>] (check_preemption_disabled+0x138/0x13c)
[ 7.011592] [<c071ca5c>] (check_preemption_disabled) from [<c071ca80>] (debug_smp_processor_id+0x20/0x24)
[ 7.012214] [<c071ca80>] (debug_smp_processor_id) from [<c03335e0>] (optimized_callback+0x2c/0xe4)
[ 7.013077] [<c03335e0>] (optimized_callback) from [<bf0021b0>] (0xbf0021b0)
To fix this issue, call get_kprobe_ctlblk() right after
irq-disabled since that disables preemption.
Fixes: 0dc016dbd8 ("ARM: kprobes: enable OPTPROBES for ARM 32")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>