Commit graph

766,491 commits

Author SHA1 Message Date
John Fastabend
e23afe5e7c bpf: sockmap, on update propagate errors back to userspace
When an error happens in the update sockmap element logic also pass
the err up to the user.

Fixes: e5cd3abcb3 ("bpf: sockmap, refactor sockmap routines to work with hashmap")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-17 01:48:22 +02:00
Linus Torvalds
e6506eb241 Some of the ftrace internal events use a zero for a data size of
a field event. This is increasingly important for the histogram trigger
 work that is being extended.
 
 While auditing trace events, I found that a couple of the xen events
 were used as just marking that a function was called, by creating
 a static array of size zero. This can play havoc with the tracing
 features if these events are used, because a zero size of a static
 array is denoted as a special nul terminated dynamic array (this is
 what the trace_marker code uses). But since the xen events have no
 size, they are not nul terminated, and unexpected results may occur.
 
 As trace events were never intended on being a marker to denote
 that a function was hit or not, especially since function tracing
 and kprobes can trivially do the same, the best course of action is
 to simply remove these events.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWvtgDhQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qtY0AQC2HSSRkP5GVL1/c1Xoxl202O1tQ9Dp
 G08oci4bfcRCIAEA8ATc+1LZPGQUvd0ucrD4FiJnfpYUHrCTvvRsz4d9LQQ=
 =HUQR
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.17-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fix from Steven Rostedt:
 "Some of the ftrace internal events use a zero for a data size of a
  field event. This is increasingly important for the histogram trigger
  work that is being extended.

  While auditing trace events, I found that a couple of the xen events
  were used as just marking that a function was called, by creating a
  static array of size zero. This can play havoc with the tracing
  features if these events are used, because a zero size of a static
  array is denoted as a special nul terminated dynamic array (this is
  what the trace_marker code uses). But since the xen events have no
  size, they are not nul terminated, and unexpected results may occur.

  As trace events were never intended on being a marker to denote that a
  function was hit or not, especially since function tracing and kprobes
  can trivially do the same, the best course of action is to simply
  remove these events"

* tag 'trace-v4.17-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing/x86/xen: Remove zero data size trace events trace_xen_mmu_flush_tlb{_all}
2018-05-16 16:45:23 -07:00
Yonghong Song
683d2ac390 bpf: fix sock hashmap kmalloc warning
syzbot reported a kernel warning below:
  WARNING: CPU: 0 PID: 4499 at mm/slab_common.c:996 kmalloc_slab+0x56/0x70 mm/slab_common.c:996
  Kernel panic - not syncing: panic_on_warn set ...

  CPU: 0 PID: 4499 Comm: syz-executor050 Not tainted 4.17.0-rc3+ #9
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  Call Trace:
   __dump_stack lib/dump_stack.c:77 [inline]
   dump_stack+0x1b9/0x294 lib/dump_stack.c:113
   panic+0x22f/0x4de kernel/panic.c:184
   __warn.cold.8+0x163/0x1b3 kernel/panic.c:536
   report_bug+0x252/0x2d0 lib/bug.c:186
   fixup_bug arch/x86/kernel/traps.c:178 [inline]
   do_error_trap+0x1de/0x490 arch/x86/kernel/traps.c:296
   do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315
   invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:992
  RIP: 0010:kmalloc_slab+0x56/0x70 mm/slab_common.c:996
  RSP: 0018:ffff8801d907fc58 EFLAGS: 00010246
  RAX: 0000000000000000 RBX: ffff8801aeecb280 RCX: ffffffff8185ebd7
  RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000ffffffe1
  RBP: ffff8801d907fc58 R08: ffff8801adb5e1c0 R09: ffffed0035a84700
  R10: ffffed0035a84700 R11: ffff8801ad423803 R12: ffff8801aeecb280
  R13: 00000000fffffff4 R14: ffff8801ad891a00 R15: 00000000014200c0
   __do_kmalloc mm/slab.c:3713 [inline]
   __kmalloc+0x25/0x760 mm/slab.c:3727
   kmalloc include/linux/slab.h:517 [inline]
   map_get_next_key+0x24a/0x640 kernel/bpf/syscall.c:858
   __do_sys_bpf kernel/bpf/syscall.c:2131 [inline]
   __se_sys_bpf kernel/bpf/syscall.c:2096 [inline]
   __x64_sys_bpf+0x354/0x4f0 kernel/bpf/syscall.c:2096
   do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

The test case is against sock hashmap with a key size 0xffffffe1.
Such a large key size will cause the below code in function
sock_hash_alloc() overflowing and produces a smaller elem_size,
hence map creation will be successful.
    htab->elem_size = sizeof(struct htab_elem) +
                      round_up(htab->map.key_size, 8);

Later, when map_get_next_key is called and kernel tries
to allocate the key unsuccessfully, it will issue
the above warning.

Similar to hashtab, ensure the key size is at most
MAX_BPF_STACK for a successful map creation.

Fixes: 8111038444 ("bpf: sockmap, add hash map support")
Reported-by: syzbot+e4566d29080e7f3460ff@syzkaller.appspotmail.com
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-17 00:56:06 +02:00
David Beckett
f0307a7ed1 libbpf: add ifindex to enable offload support
BPF programs currently can only be offloaded using iproute2. This
patch will allow programs to be offloaded using libbpf calls.

Signed-off-by: David Beckett <david.beckett@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-17 00:54:26 +02:00
Mathieu Malaterre
be2d04d11f bpf: add __printf verification to bpf_verifier_vlog
__printf is useful to verify format and arguments. ‘bpf_verifier_vlog’
function is used twice in verifier.c in both cases the caller function
already uses the __printf gcc attribute.

Remove the following warning, triggered with W=1:

  kernel/bpf/verifier.c:176:2: warning: function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-17 00:49:17 +02:00
Oza Pawandeep
56abbf8ad7 PCI/DPC: Clear interrupt status in interrupt handler top half
The generic IRQ handling code ensures that an interrupt handler runs with
its interrupt masked or disabled.  If the interrupt is level-triggered, the
interrupt handler must tell its device to stop asserting the interrupt
before returning.  If it doesn't, we will immediately take the interrupt
again when the handler returns and the generic code unmasks the interrupt.

The driver doesn't know whether its interrupt is edge- or level-triggered,
so it must clear its interrupt source directly in its interrupt handler.

Previously we cleared the DPC interrupt status in the bottom half, i.e., in
deferred work, which can cause an interrupt storm if the DPC interrupt
happens to be level-triggered, e.g., if we're using INTx instead of MSI.

Clear the DPC interrupt status bit in the interrupt handler, not in the
deferred work.

Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-05-16 15:59:35 -05:00
Marc Dionne
1fba5868ee afs: Fix mounting of backup volumes
In theory the AFS_VLSF_BACKVOL flag for a server in a vldb entry
would indicate the presence of a backup volume on that server.

In practice however, this flag is never set, and the presence of
a backup volume is implied by the entry having AFS_VLF_BACKEXISTS set,
for the server that hosts the read-write volume (has AFS_VLSF_RWVOL).

Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-16 21:35:23 +01:00
David Howells
378831e4da afs: Fix directory permissions check
Doing faccessat("/afs/some/directory", 0) triggers a BUG in the permissions
check code.

Fix this by just removing the BUG section.  If no permissions are asked
for, just return okay if the file exists.

Also:

 (1) Split up the directory check so that it has separate if-statements
     rather than if-else-if (e.g. checking for MAY_EXEC shouldn't skip the
     check for MAY_READ and MAY_WRITE).

 (2) Check for MAY_CHDIR as MAY_EXEC.

Without the main fix, the following BUG may occur:

 kernel BUG at fs/afs/security.c:386!
 invalid opcode: 0000 [#1] SMP PTI
 ...
 RIP: 0010:afs_permission+0x19d/0x1a0 [kafs]
 ...
 Call Trace:
  ? inode_permission+0xbe/0x180
  ? do_faccessat+0xdc/0x270
  ? do_syscall_64+0x60/0x1f0
  ? entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 00d3b7a453 ("[AFS]: Add security support.")
Reported-by: Jonathan Billings <jsbillings@jsbillings.org>
Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-16 21:35:23 +01:00
Mathieu Malaterre
db6f9e55c8 clocksource: Move inline keyword to the beginning of function declarations
The inline keyword was not at the beginning of the function declarations.
Fix the following warnings triggered when using W=1:

  kernel/time/clocksource.c:456:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
  kernel/time/clocksource.c:457:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: https://lkml.kernel.org/r/20180516195943.31924-1-malat@debian.org
2018-05-16 22:21:32 +02:00
Parav Pandit
e822ff213f IB/cm: Store and restore ah_attr during CM message processing
During CM request processing flow, ah_attr is initialized twice.
First based on wc. Secondly based on primary path record.
ah_attr initialization from path record can fail, which leads to ah_attr
zeroed out.

Therefore, always initialize ah_attr on stack during reinitialization
phase. If ah_attr init is successful, use the new ah_attry by
overwriting the old one. If the ah_attr init fails, continue to use the
last ah_attr.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-16 14:11:46 -06:00
Parav Pandit
0e225dcb76 IB/cm: Store and restore ah_attr during LAP msg processing
During CM LAP processing, ah_attr is reinitialized on receiving LAP
request. First likely during CM request processing.

ah_attr might get zero out if LAP processing fails.
Therefore, attempt to create new ah_attr for the LAP message.
If the initialization fails, continue with older ah_attr.
If the initialization passes, consider the new ah_attr by overwriting
the older one.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-16 14:11:46 -06:00
Parav Pandit
a5c57d3272 IB/cm: Avoid AV ah_attr overwriting during LAP message handling
AH attribute of the cm_id can be overwritten if LAP message is received
on CM request which is in progress. This bug got introduced to avoid
sleeping when spin lock is held as part of commit in Fixes tag.

Therefore validate the cm_id state first and continue to perform AV
ah_attr initialization.

Given that Aleternative path related messages are not supported for
RoCE, init_av_from_response/path is such messages are ok to be called
from blocking context.

Fixes: 33f93e1ebc ("IB/cm: Fix sleeping while spin lock is held")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-16 14:11:46 -06:00
David Ahern
44edef77bd samples/bpf: Decrement ttl in fib forwarding example
Only consider forwarding packets if ttl in received packet is > 1 and
decrement ttl before handing off to bpf_redirect_map.

Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-16 22:04:52 +02:00
Daniel Borkmann
5b26ace650 Merge branch 'bpf-sock-hashmap'
John Fastabend says:

====================
In the original sockmap implementation we got away with using an
array similar to devmap. However, unlike devmap where an ifindex
has a nice 1:1 function into the map we have found some use cases
with sockets that need to be referenced using longer keys.

This series adds support for a sockhash map reusing as much of
the sockmap code as possible. I made the decision to add sockhash
specific helpers vs trying to generalize the existing helpers
because (a) they have sockmap in the name and (b) the keys are
different types. I prefer to be explicit here rather than play
type games or do something else tricky.

To test this we duplicate all the sockmap testing except swap out
the sockmap with a sockhash.

v2: fix file stats and add v2 tag
v3: move tool updates into test patch, move bpftool updates into
    its own patch, and fixup the test patch stats to catch the
    renamed file and provide only diffs ± on that.
v4: Add documentation to UAPI bpf.h
v5: Add documentation to tools UAPI bpf.h
v6: 'git add' test_sockhash_kern.c which was previously missing
    but was not causing issues because of typo in test script,
    noticed by Daniel. After this the git format-patch -M option
    no longer tracks the rename of the test_sockmap_kern files for
    some reason. I guess the diff has exceeded some threshold.
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-16 22:02:23 +02:00
John Fastabend
62c52d1fdd bpf: bpftool, support for sockhash
This adds the SOCKHASH map type to bpftools so that we get correct
pretty printing.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-16 22:00:21 +02:00
John Fastabend
b8b394faa9 bpf: selftest additions for SOCKHASH
This runs existing SOCKMAP tests with SOCKHASH map type. To do this
we push programs into include file and build two BPF programs. One
for SOCKHASH and one for SOCKMAP.

We then run the entire test suite with each type.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-16 22:00:12 +02:00
Arnaldo Carvalho de Melo
17c257e867 tools lib api: Unexport 'tracing_path' variable
One should use tracing_path_mount() instead, so more things get done
lazily instead of at every 'perf' tool call startup.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-fci4yll35idd9yuslp67vqc2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-16 16:27:14 -03:00
Arnaldo Carvalho de Melo
00a6270361 tools lib api: The tracing_mnt variable doesn't need to be global
Its only used in the file it is defined, so just make it static.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-p5x29u6mq2ml3mtnbg9844ad@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-16 16:20:12 -03:00
Shiraz Saleem
f43c00c04b i40iw: Extend port reuse support for listeners
If two listeners are created with different IP's but
same port, the second rdma_listen fails due to a
duplicate port entry being added from the CQP add
APBVT OP. commit f16dc0aa5e ("i40iw: Add support
for port reuse on active side connections") does not
account for listener side port reuse.

Check for duplicate port before invoking the CQP command
to add APBVT entry and delete the entry only if the port
is not in use. Additionally, consolidate all port-reuse
logic into i40iw_manage_apbvt.

Fixes: f16dc0aa5e ("i40iw: Add support for port reuse on active side connections")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-16 13:13:20 -06:00
Thomas Hebb
f6bf549a0b Documentation: arm: clean up Marvell Berlin family info
Remove dead links, make spacing consistent, and note that the family was
acquired by Synaptics in 2017.

Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-05-16 13:11:57 -06:00
Arnaldo Carvalho de Melo
d01bd1ac92 perf config: Call perf_config__init() lazily
We check what perf_config__init() does at each perf_config() call,
namely if the static perf_config instance was created, so instead of
bailing out in that case, try to allocate it, bailing if it fails.

Now to get the perf_config() call out of the start of perf's main()
function, doing it also lazily.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-4bo45k6ivsmbxpfpdte4orsg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-16 16:11:09 -03:00
Alexandre Belloni
c59b3715ac rtc: nvmem: don't return an error when not enabled
Avoid reporting an error when RTC_NVMEM is not selected.

Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-05-16 21:08:42 +02:00
Jonathan Neuschäfer
cd49576745 Documentation: gpio: driver: Fix a typo and some odd grammar
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-05-16 13:07:54 -06:00
Rahul Lakkireddy
8e725f7caa cxgb4: update LE-TCAM collection for T6
For T6, clip table is separated from main TCAM. So, update LE-TCAM
collection logic to collect clip table TCAM as well. IPv6 takes
4 entries in clip table TCAM compared to 2 entries in main TCAM.

Also, in case of errors, keep LE-TCAM collected so far and set the
status to partial dump.

Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 15:01:30 -04:00
Josef Bacik
76aa1d3412 nbd: call nbd_bdev_reset instead of bd_set_size on disconnect
We need to make sure we don't just set the size of the bdev to 0 while
it's being used by a file system.  We have the appropriate check in
nbd_bdev_reset, simply use that helper instead.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-16 12:54:13 -06:00
Josef Bacik
fe1f9e6659 nbd: fix how we set bd_invalidated
bd_invalidated is kind of a pain wrt partitions as it really only
triggers the partition rescan if it is set after bd_ops->open() runs, so
setting it when we reset the device isn't useful.  We also sporadically
would still have partitions left over in some disconnect cases, so fix
this by always setting bd_invalidated on open if there's no
configuration or if we've had a disconnect action happen, that way the
partition table gets invalidated and rescanned properly.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-16 12:54:12 -06:00
Josef Bacik
96d97e1782 nbd: clear_sock on netlink disconnect
This is what the ioctl based nbd disconnect does as well.  Without this
the device will just sit there and wait for the connection to go away
(or IO to occur) before the device gets torn down.  Instead clear
everything up on our end so the configuration goes away as quickly as
possible.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-16 12:54:10 -06:00
Josef Bacik
9e2b19675d nbd: use bd_set_size when updating disk size
When we stopped relying on the bdev everywhere I broke updating the
block device size on the fly, which ceph relies on.  We can't just do
set_capacity, we also have to do bd_set_size so things like parted will
notice the device size change.

Fixes: 29eaadc ("nbd: stop using the bdev everywhere")
cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-16 12:54:09 -06:00
Josef Bacik
c3f7c93976 nbd: update size when connected
I messed up changing the size of an NBD device while it was connected by
not actually updating the device or doing the uevent.  Fix this by
updating everything if we're connected and we change the size.

cc: stable@vger.kernel.org
Fixes: 639812a ("nbd: don't set the device size until we're connected")
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-16 12:54:07 -06:00
Josef Bacik
8364da4751 nbd: fix nbd device deletion
This fixes a use after free bug, we shouldn't be doing disk->queue right
after we do del_gendisk(disk).  Save the queue and do the cleanup after
the del_gendisk.

Fixes: c6a4759ea0 ("nbd: add device refcounting")
cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-16 12:54:06 -06:00
Jason Wang
7063efd33b tuntap: fix use after free during release
After commit b196d88aba ("tun: fix use after free for ptr_ring") we
need clean up tx ring during release(). But unfortunately, it tries to
do the cleanup blindly after socket were destroyed which will lead
another use-after-free. Fix this by doing the cleanup before dropping
the last reference of the socket in __tun_detach().

Reported-by: Andrei Vagin <avagin@virtuozzo.com>
Acked-by: Andrei Vagin <avagin@virtuozzo.com>
Fixes: b196d88aba ("tun: fix use after free for ptr_ring")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:53:10 -04:00
David S. Miller
fee8fb952d Merge branch 'qed-LL2-fixes'
Michal Kalderon says:

====================
qed: LL2 fixes

This series fixes some issues in ll2 related to synchronization
and resource freeing
====================

Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:52:30 -04:00
Michal Kalderon
490068deae qed: Fix LL2 race during connection terminate
Stress on qedi/qedr load unload lead to list_del corruption.
This is due to ll2 connection terminate freeing resources without
verifying that no more ll2 processing will occur.

This patch unregisters the ll2 status block before terminating
the connection to assure this race does not occur.

Fixes: 1d6cff4fca ("qed: Add iSCSI out of order packet handling")
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:52:23 -04:00
Michal Kalderon
ffd2c0d127 qed: Fix possibility of list corruption during rmmod flows
The ll2 flows of flushing the txq/rxq need to be synchronized with the
regular fp processing. Caused list corruption during load/unload stress
tests.

Fixes: 0a7fb11c23 ("qed: Add Light L2 support")
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:52:23 -04:00
Michal Kalderon
f9bcd60274 qed: LL2 flush isles when connection is closed
Driver should free all pending isles once it gets a FLUSH cqe from FW.
Part of iSCSI out of order flow.

Fixes: 1d6cff4fca ("qed: Add iSCSI out of order packet handling")
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:52:23 -04:00
David S. Miller
7e360d9d31 Merge branch 'qed-LL2-fixes'
Michal Kalderon says:

====================
qed: LL2 fixes

This series fixes some issues in ll2 related to synchronization
and resource freeing
====================

Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
2018-05-16 14:49:01 -04:00
Michal Kalderon
fc16f56b7b qed: Fix LL2 race during connection terminate
Stress on qedi/qedr load unload lead to list_del corruption.
This is due to ll2 connection terminate freeing resources without
verifying that no more ll2 processing will occur.

This patch unregisters the ll2 status block before terminating
the connection to assure this race does not occur.

Fixes: 1d6cff4fca ("qed: Add iSCSI out of order packet handling")
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:49:01 -04:00
Michal Kalderon
6291c608a9 qed: Fix possibility of list corruption during rmmod flows
The ll2 flows of flushing the txq/rxq need to be synchronized with the
regular fp processing. Caused list corruption during load/unload stress
tests.

Fixes: 0a7fb11c23 ("qed: Add Light L2 support")
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:49:01 -04:00
Michal Kalderon
974f6c046a qed: LL2 flush isles when connection is closed
Driver should free all pending isles once it gets a FLUSH cqe from FW.
Part of iSCSI out of order flow.

Fixes: 1d6cff4fca ("qed: Add iSCSI out of order packet handling")
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:49:00 -04:00
YueHaibing
76e597eb15 net: ethoc: Remove useless test before clk_disable_unprepare
clk_disable_unprepare() already checks that the clock pointer is valid.
No need to test it before calling it.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:44:29 -04:00
YueHaibing
93120eba48 net: stmmac: Remove useless test before clk_disable_unprepare
clk_disable_unprepare() already checks that the clock pointer is valid.
No need to test it before calling it.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:43:54 -04:00
Davide Caratti
5a4931ae01 net/sched: fix refcnt leak in the error path of tcf_vlan_init()
Similarly to what was done with commit a52956dfc5 ("net sched actions:
fix refcnt leak in skbmod"), fix the error path of tcf_vlan_init() to avoid
refcnt leaks when wrong value of TCA_VLAN_PUSH_VLAN_PROTOCOL is given.

Fixes: 5026c9b1ba ("net sched: vlan action fix late binding")
CC: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:41:44 -04:00
Josef Bacik
3de9beeeb4 block: fix MAINTAINERS email for nbd
I've been missing stuff because it's been going into my work email which
is a black hole.  Update to the email I actually use so I stop missing
patches and bug reports.

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-16 12:40:06 -06:00
Geert Uytterhoeven
e49ac9679e net: 8390: ne: Fix accidentally removed RBTX4927 support
The configuration settings for RBTX4927 were accidentally removed,
leading to a silently broken network interface.

Re-add the missing settings to fix this.

Fixes: 8eb97ff5a4 ("net: 8390: remove m32r specific bits")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:38:54 -04:00
Hemanth Puranik
9e6881d366 net: qcom/emac: Encapsulate sgmii ops under one structure
This patch introduces ops structure for sgmii, This by ensures that
we do not need dummy functions in case of emulation platforms.

Signed-off-by: Hemanth Puranik <hpuranik@codeaurora.org>
Acked-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:33:27 -04:00
David S. Miller
cfb3e08968 Merge branch 'rmnet-next'
Subash Abhinov Kasiviswanathan says:

====================
net: qualcomm: rmnet: Updates 2018-05-14

Patch 1 adds tx_drops counter to more places.
Patch 2 adds ethtool private stats support to make it easy to debug
the checksum offload path.
Patch 3 is a cleanup in command packet processing path.

v1->v2: Fix the incorrect if / else statement in
rmnet_map_checksum_downlink_packet() and define rmnet_ethtool_ops
as static as mentioned by kbuild test robot.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:23:05 -04:00
Subash Abhinov Kasiviswanathan
721ce0f644 net: qualcomm: rmnet: Remove redundant command check
The command packet size is already checked once in
rmnet_map_deaggregate() for the header, packet and trailer size, so
this additional check is not needed.

Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:23:04 -04:00
Subash Abhinov Kasiviswanathan
bbde32d38b net: qualcomm: rmnet: Add support for ethtool private stats
Add ethtool private stats handler to debug the handling of packets
with checksum offload header / trailer. This allows to keep track of
the number of packets for which hardware computes the checksum and
counts and reasons where checksum computation was skipped in hardware
and was done in the network stack.

Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:23:04 -04:00
Subash Abhinov Kasiviswanathan
1eece799d3 net: qualcomm: rmnet: Capture all drops in transmit path
Packets in transmit path could potentially be dropped if there were
errors while adding the MAP header or the checksum header.
Increment the tx_drops stats in these cases.

Additionally, refactor the code to free the packet and increment
the tx_drops stat under a single label.

Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:23:04 -04:00
David S. Miller
b0ec758510 Merge branch 'of-mdio-Fall-back-to-mdiobus_register-with-NULL-device_node'
Florian Fainelli says:

====================
of: mdio: Fall back to mdiobus_register() with NULL device_node

This patch series updates of_mdiobus_register() such that when the device_node
argument is NULL, it calls mdiobus_register() directly. This is consistent with
the behavior of of_mdiobus_register() when CONFIG_OF=n.

I only converted the most obvious drivers, there are others that have a much
less obvious behavior and specifically attempt to deal with CONFIG_ACPI.

Changes in v2:

- fixed build error in davincin_mdio.c (Grygorii)
- reworked first patch a bit: commit message, subject and removed useless
  code comment
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16 14:20:36 -04:00