Commit graph

766,491 commits

Author SHA1 Message Date
David Howells
b61f7dcf4e afs: Fix directory page locking
The afs directory loading code (primarily afs_read_dir()) locks all the
pages that hold a directory's content blob to defend against
getdents/getdents races and getdents/lookup races where the competitors
issue conflicting reads on the same data.  As the reads will complete
consecutively, they may retrieve different versions of the data and
one may overwrite the data that the other is busy parsing.

Fix this by not locking the pages at all, but rather by turning the
validation lock into an rwsem and getting an exclusive lock on it whilst
reading the data or validating the attributes and a shared lock whilst
parsing the data.  Sharing the attribute validation lock should be fine as
the data fetch will retrieve the attributes also.

The individual page locks aren't needed at all as the only place they're
being used is to serialise data loading.

Without this patch, the:

 	if (!test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags)) {
		...
	}

part of afs_read_dir() may be skipped, leaving the pages unlocked when we
hit the success: clause - in which case we try to unlock the not-locked
pages, leading to the following oops:

  page:ffffe38b405b4300 count:3 mapcount:0 mapping:ffff98156c83a978 index:0x0
  flags: 0xfffe000001004(referenced|private)
  raw: 000fffe000001004 ffff98156c83a978 0000000000000000 00000003ffffffff
  raw: dead000000000100 dead000000000200 0000000000000001 ffff98156b27c000
  page dumped because: VM_BUG_ON_PAGE(!PageLocked(page))
  page->mem_cgroup:ffff98156b27c000
  ------------[ cut here ]------------
  kernel BUG at mm/filemap.c:1205!
  ...
  RIP: 0010:unlock_page+0x43/0x50
  ...
  Call Trace:
   afs_dir_iterate+0x789/0x8f0 [kafs]
   ? _cond_resched+0x15/0x30
   ? kmem_cache_alloc_trace+0x166/0x1d0
   ? afs_do_lookup+0x69/0x490 [kafs]
   ? afs_do_lookup+0x101/0x490 [kafs]
   ? key_default_cmp+0x20/0x20
   ? request_key+0x3c/0x80
   ? afs_lookup+0xf1/0x340 [kafs]
   ? __lookup_slow+0x97/0x150
   ? lookup_slow+0x35/0x50
   ? walk_component+0x1bf/0x490
   ? path_lookupat.isra.52+0x75/0x200
   ? filename_lookup.part.66+0xa0/0x170
   ? afs_end_vnode_operation+0x41/0x60 [kafs]
   ? __check_object_size+0x9c/0x171
   ? strncpy_from_user+0x4a/0x170
   ? vfs_statx+0x73/0xe0
   ? __do_sys_newlstat+0x39/0x70
   ? __x64_sys_getdents+0xc9/0x140
   ? __x64_sys_getdents+0x140/0x140
   ? do_syscall_64+0x5b/0x160
   ? entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: f3ddee8dc4 ("afs: Fix directory handling")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
2018-05-14 13:17:35 +01:00
Chris Wilson
cd078bf95d drm/i915/execlists: Use rmb() to order CSB reads
We assume that the CSB is written using the normal ringbuffer
coherency protocols, as outlined in kernel/events/ring_buffer.c:

    *   (HW)                              (DRIVER)
    *
    *   if (LOAD ->data_tail) {            LOAD ->data_head
    *                      (A)             smp_rmb()       (C)
    *      STORE $data                     LOAD $data
    *      smp_wmb()       (B)             smp_mb()        (D)
    *      STORE ->data_head               STORE ->data_tail
    *   }

So we assume that the HW fulfils its ordering requirements (B), and so
we should use a complimentary rmb (C) to ensure that our read of its
WRITE pointer is completed before we start accessing the data.

The final mb (D) is implied by the uncached mmio we perform to inform
the HW of our READ pointer.

References: https://bugs.freedesktop.org/show_bug.cgi?id=105064
References: https://bugs.freedesktop.org/show_bug.cgi?id=105888
References: https://bugs.freedesktop.org/show_bug.cgi?id=106185
Fixes: 767a983ab2 ("drm/i915/execlists: Read the context-status HEAD from the HWSP")
References: 61bf9719fa ("drm/i915/cnl: Use mmio access to context status buffer")
Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Timo Aaltonen <tjaalton@ubuntu.com>
Tested-by: Timo Aaltonen <tjaalton@ubuntu.com>
Acked-by: Michel Thierry <michel.thierry@intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180511121147.31915-1-chris@chris-wilson.co.uk
(cherry picked from commit 77dfedb5be)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-05-14 15:09:04 +03:00
Matthew Auld
20943f9849 drm/i915/userptr: reject zero user_size
Operating on a zero sized GEM userptr object will lead to explosions.

Fixes: 5cc9ed4b9a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl")
Testcase: igt/gem_userptr_blits/input-checking
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502195021.30900-1-matthew.auld@intel.com
(cherry picked from commit c11c7bfd21)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-05-14 15:09:03 +03:00
Sergio Paracuellos
b736906657 staging: ks7010: replace cast type in assignment in hostif_sme_set_pmksa
There is an assignment inside hostif_sme_set_pmksa function
which is being used together with cpu_to_le16 using uint16_t as cast
type. Replace it to use 'u16' instead.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:07:07 +02:00
Sergio Paracuellos
88c8016232 staging: ks7010: use 'u16' for casts in assignments in hostif_sme_set_rsn
There are some assignments inside hostif_sme_set_rsn function
which are being used together with cpu_to_le16 using uint16_t
as cast type. Replace all of them to use 'u16' instead.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:07:07 +02:00
Sergio Paracuellos
14b61a5205 staging: ks7010: change two parameter types in hostif_mic_failure_request
Parameters 'failure_count' and 'timer' was declared as unsigned
short and then there was being casted to u16 inside cpu_to_le16
to make the assignation. Just declare them as 'u16' and avoid
casting at all.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:07:07 +02:00
Sergio Paracuellos
dea2f1fb84 staging: ks7010: replace uint* type into the u* ones in hostif_bss_scan_request
In function hostif_bss_scan_request parameters 'scan_ssid' and
'scan_ssid_len' are declared as uint8_t. Change them to be 'u8'
instead which is preferred. Also update two casts inside the same
function to use 'u32' instead of 'uint32_t'.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:07:07 +02:00
Sergio Paracuellos
9a1420e7a5 staging: ks7010: replace cast types in assignments in hostif_phy_information_request
There are some assignments inside hostif_phy_information_request
function which are being used together with cpu_to_le16 using
uint16_t as cast type. Replace all of them to use 'u16' instead.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:07:07 +02:00
Sergio Paracuellos
bcbd1f1841 staging: ks7010: replace cast type in assignment in hostif_adhoc_set_request
There is an assignment inside hostif_adhoc_set_request function
which is being used together with cpu_to_le16 using uint16_t as cast
type. Replace it to use 'u16' instead.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:07:07 +02:00
Sergio Paracuellos
78e2417181 staging: ks7010: replace cast type in assignments in hostif_infrastructure_set_request
There are some assignments inside hostif_infrastructure_set_request
function which are being used together with cpu_to_le16 using
uint16_t as cast type. Replace all of them to use 'u16' instead.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:07:07 +02:00
Sergio Paracuellos
889d706330 staging: ks7010: use u16 as type for casting in hostif_ps_adhoc_set_request
There is an assignment inside hostif_ps_adhoc_set_request function
which is being used together with cpu_to_le16 using uint16_t as cast
type. Replace it to use 'u16' instead.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:07:07 +02:00
Sergio Paracuellos
22bef06649 staging: ks7010: replace casts to use type u16 in init_request
There are soem assignments inside init_request function which
are being used together with cpu_to_le16 using uint16_t as cast
type. Replace all of them to use 'u16' instead.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:07:06 +02:00
Sergio Paracuellos
5503fd5afd staging: ks7010: use u16 as cast type in hostif_start_request
Use u16 as cast type in hostif_start_request function replacing
uint16_t which was being used.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:07:06 +02:00
Sergio Paracuellos
f7761114be staging: ks7010: avoid no needed cast in ks_wlan_cap
In ks_wlan_cap there is a cast to uint16_t to use cpu_to_le16
with variable 'capability' which is already defined as u16.
Avoid this cast to clean code.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:07:06 +02:00
Sergio Paracuellos
81ad5837d0 staging: ks7010: change parameter type in hostif_mib_get_request
Second parameter 'mib_attribute' in function hostif_mib_get_request
is declared as unsigned long and inside the function a cast to uint32_t
is being used. Just pass a u32 instead and avoid the casting.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:07:06 +02:00
Sergio Paracuellos
521d3f26bc staging: ks7010: change some cast type from uint16_t to u16 in hostif_data_request
There are some castings inside the function hostif_data_request
which are being using with uint16_t type. Fields which have being
assigned are declared as u16. So update casts types to u16 in all
of them.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:07:06 +02:00
Sergio Paracuellos
bc0b3f43ca staging: ks7010: use u16 as type for casting in hostif_data_indication_wpa
Field 'counter' in mic_failure struct is being assigned casting
value using uint16_t. Replace with u16 which is the correct type
of the field and the preferred one.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:07:06 +02:00
Sergio Paracuellos
4cf2df756f staging: ks7010: replace not standard uint type to unsigned int
The field 'wakeup_count' in 'ks_wlan_private' struct is declared
as 'uint' which is not a standard type. Replace in favour of
'unsigned int' which it is.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:07:06 +02:00
Sergio Paracuellos
f647b8e1ff staging: ks7010: replace uint8_t with u8 in ks_wlan_set_rx_gain
In function ks_wlan_set_rx_gain a cast to uint8_t is being used
to assign reception gain. 'rx_gain' field is defined as u8 so
replace the cast to the correct type

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:07:06 +02:00
Sergio Paracuellos
ace98ed095 staging: ks7010: replace uint8_t with u8 in ks_wlan_set_tx_gain
In function ks_wlan_set_tx_gain a cast to uint8_t is being used
to assign transmission gain. 'tx_gain' field is defined as u8 so
replace the cast to the correct type.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:07:06 +02:00
Sergio Paracuellos
255d4e1ddc staging: ks7010: change uint8_t casts to u8 in ks_wlan_set_rate
There are some casts to uint8_t in ks_wlan_set_rate function to
assign values of the bitrate. Just change it to u8 which is the one
defined for the field 'body' of the struct which is in use.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:07:06 +02:00
Sergio Paracuellos
89467e74aa staging: ks7010: change parameter type in ks_wlan_hw_rx function
The parameter 'size' in function ks_wlan_hw_rx is declared as
uint16_t and can be declared as size_t which makes more sense.
It is being passed to hif_align_size function which also expects
a size_t as parameter so just change its type. Also update two
casts in calls to this function.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:07:06 +02:00
Sergio Paracuellos
83911837f8 staging: ks7010: change cast from uint16_t to u16
Header size and event fields of header are declared
as __le16 and being casted using uint16_t in cpu_to_le16.
Change cast to use preferred u16.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:07:06 +02:00
Sergio Paracuellos
62a37b72ce staging: ks7010: replace unsigned char type with u8
Variable 'byte' in ks7010_upload_firmware function is declared
as unsigned char and is only being used to read hardware
registers which are expected in sdio_read_byteb function as u8.
Change 'byte' variable type to u8 which is preferred.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:07:06 +02:00
Sergio Paracuellos
449f9eefa1 staging: ks7010: remove no necessary blank line
There was two blank lines between definitions and statements
in ks7010_upload_firmware function. Remove one of them.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:07:06 +02:00
Sergio Paracuellos
154d3c2e05 staging: ks7010: remove not used definition WPA_CAPABILITY_PREAUTH
The WPA_CAPABILITY_PREAUTH definition is not being used at all so
just remove it.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:07:05 +02:00
Kilian Köppchen
1e85394462 staging: bcm2835: Use BIT_ULL macro
This patch fixes the checkpatch.pl check hint:

CHECK: Prefer using the BIT_ULL macro

Signed-off-by: Kilian Köppchen <kiliankoeppchen@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:05:49 +02:00
Kamal Heib
d84c7b304b staging: mt7621-eth: Refactor ethtool stats
This patch removes the ugly macro hack to make sure hw_stats and ethtool
strings are consisten, instead define a new struct which will hold the
stat string and his index within the hw_stats struct.

Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:05:49 +02:00
Ajay Singh
49bf665801 staging: wilc1000: refactor host_int_parse_assoc_resp_info() to remove unused code
Remove 'connect_resp_info' structure as most of its elements are not used.

Modified wilc_parse_assoc_resp_info() to directly parse and fill value
in connect_info structure variable. Remove use of 'assoc_resp_len' variable.
get_assoc_resp_cap_info() & get_asoc_id() functions are remove as its
not used anymore.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:04:49 +02:00
Ajay Singh
b2f86aa18f staging: wilc1000: remove s8idxarray to avoid datatype in variable name
Cleanup patch to have variable names as per linux coding style.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:04:49 +02:00
Ajay Singh
aaf5df9d0c staging: wilc1000: remove unused 'lock' varible in 'wilc_priv' structure
Cleanup patch to remove the unused variable from 'wilc_priv' structure.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:04:49 +02:00
Ajay Singh
1275022a10 staging: wilc1000: added comments for mutex and spinlock_t
Added comments for mutex and spinlock_t to avoid checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:04:49 +02:00
Ajay Singh
c7ceac21e7 staging: wilc1000: remove 'flag' argument from wilc_mac_indicate()
Remove 'flag' function parameter in wilc_mac_indicate() as only one
condition was handled using that parameter. Also removed unnecessary
call to wilc_mac_indicate() as no operation was performed in that
function call.
After above changes below macros are not required anymore.
WILC_MAC_INDICATE_STATUS	0x1
WILC_MAC_INDICATE_SCAN		0x2

This changes also helped in resolving the line over 80 chars issue
found by checkatpch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:04:49 +02:00
Ajay Singh
2e530e2836 staging: wilc1000: added #define for setting radiotap header
Added new macro to resolve below checkpatch issues in linux_mon.

"Lines should not end with a '('"

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:04:49 +02:00
Ajay Singh
65ebccebb8 staging: wilc1000: fix line over 80 chars in wilc_sdio struct
Fix line over 80 chars issue found by checkpatch.pl script by placing
the comment message above the macro preprocessor.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:04:48 +02:00
Ajay Singh
977febc9cf staging: wilc1000: refactor del_station() to avoid parenthesis misalignment
Refactor the code to fix open parenthesis alignment issue reported by
checkpatch.pl script in del_station().

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:04:48 +02:00
Ajay Singh
2cfcc2fc1b staging: wilc1000: rename u8security to avoid datatype in variable name
Cleanup patch to avoid use of datatype in variable name to follow as
per linux coding style.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:04:48 +02:00
Ajay Singh
2b26ae0095 staging: wilc1000: fix line over 80 chars issue in connect()
Fix line over 80 characters in connect() by using temporary variables.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:04:48 +02:00
Ajay Singh
0142ca35d0 staging: wilc1000: fix line over 80 chars in scan()
Fix line over 80 characters issues found by checkpatch.pl script with
the help of local variable.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:04:48 +02:00
Ajay Singh
36fef228ed staging: wilc1000: fix line over 80 characters in add_key()
Fix line over 80 character issue found by checkpatch.pl script in
add_key().

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:04:48 +02:00
Ajay Singh
9d48bfaec6 staging: wilc1000: fix line over 80 chars in wilc_create_wiphy() declaration
Fix line over 80 characters issue found by checkpatch.pl script in
function declaration.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:04:48 +02:00
Ajay Singh
783cfc8bd3 staging: wilc1000: fix line over 80 chars in get_station()
Fix line over 80 characters issue in get_station().

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:04:48 +02:00
Ajay Singh
31c61cd7b4 staging: wilc1000: fix line over 80 chars in wilc_wfi_cfg_tx_vendor_spec()
Fix line over 80 characters issues reported by checkpatch.pl script in
wilc_wfi_cfg_tx_vendor_spec() by using temporary variable. Simplified
'if else' condition with 'if'.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:04:48 +02:00
Ajay Singh
4d03c3d51b staging: wilc1000: fix line over 80 charas in wilc_wfi_remain_on_channel_expired()
Refactor wilc_wfi_remain_on_channel_expired() to avoid line over 80
character issue reported by checkpatch.pl script. Also assigned value in the
variable at the time of declaration.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:04:48 +02:00
Ajay Singh
7ca6ba24c3 staging: wilc1000: use kmemdup instead of kmalloc in add_network_to_shadow()
Use kmemdup instead of kmalloc & memcpy in add_network_to_shadow(). Also
added  code to set 'ies_len' to zero in case of memory allocation
failure.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:04:48 +02:00
Ajay Singh
30300a1cbd staging: wilc1000: fix line over 80 chars in add_network_to_shadow()
Fix line over 80 characters issue reported by checkpatch in
add_network_to_shadow() by using temporary variable.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:04:48 +02:00
Ajay Singh
50fdf8142d staging: wilc1000: rename clear_duringIP() to avoid camelCase issue
Rename clear_duringIP() function to avoid camelCase issue reported by
checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:04:48 +02:00
Ajay Singh
151c8b920c staging: wilc1000: use kmalloc(sizeof(*mgmt_tx)...) in mgmt_tx()
Fix below checkpatch issue found in mgmt_tx()

Prefer kmalloc(sizeof(*mgmt_tx)...) over kmalloc(sizeof(struct
p2p_mgmt_data)...)

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:04:48 +02:00
Ajay Singh
c0a7882312 staging: wilc1000: use sizeof(*wdev) to allocate memory in wilc_wfi_cfg_alloc()
Fix below reported checkpatch issues in wilc_wfi_cfg_alloc().
kzalloc(sizeof(*wdev)...) over kzalloc(sizeof(struct wireless_dev)

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:04:48 +02:00
Ajay Singh
3f27ec8733 staging: wilc1000: fix line over 80 chars in linux_mon
Fix line over 80 char issue reported by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14 14:04:47 +02:00