Commit graph

766,491 commits

Author SHA1 Message Date
Paolo Abeni
69678bcd4d udp: fix SO_BINDTODEVICE
Damir reported a breakage of SO_BINDTODEVICE for UDP sockets.
In absence of VRF devices, after commit fb74c27735 ("net:
ipv4: add second dif to udp socket lookups") the dif mismatch
isn't fatal anymore for UDP socket lookup with non null
sk_bound_dev_if, breaking SO_BINDTODEVICE semantics.

This changeset addresses the issue making the dif match mandatory
again in the above scenario.

Reported-by: Damir Mansurov <dnman@oktetlabs.ru>
Fixes: fb74c27735 ("net: ipv4: add second dif to udp socket lookups")
Fixes: 1801b570dd ("net: ipv6: add second dif to udp socket lookups")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 15:42:52 -04:00
Hangbin Liu
0e8411e426 ipv4: reset fnhe_mtu_locked after cache route flushed
After route cache is flushed via ipv4_sysctl_rtcache_flush(), we forget
to reset fnhe_mtu_locked in rt_bind_exception(). When pmtu is updated
in __ip_rt_update_pmtu(), it will return directly since the pmtu is
still locked. e.g.

+ ip netns exec client ping 10.10.1.1 -c 1 -s 1400 -M do
PING 10.10.1.1 (10.10.1.1) 1400(1428) bytes of data.
>From 10.10.0.254 icmp_seq=1 Frag needed and DF set (mtu = 0)

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 15:40:52 -04:00
Mohammed Gamal
55be9f25be hv_netvsc: Fix net device attach on older Windows hosts
On older windows hosts the net_device instance is returned to
the caller of rndis_filter_device_add() without having the presence
bit set first. This would cause any subsequent calls to network device
operations (e.g. MTU change, channel change) to fail after the device
is detached once, returning -ENODEV.

Instead of returning the device instabce, we take the exit path where
we call netif_device_attach()

Fixes: 7b2ee50c0c ("hv_netvsc: common detach logic")
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 15:37:00 -04:00
Pieter Jansen van Vuuren
df13c59b54 nfp: flower: remove headroom from max MTU calculation
Since commit 29a5dcae27 ("nfp: flower: offload phys port MTU change") we
take encapsulation headroom into account when calculating the max allowed
MTU.  This is unnecessary as the max MTU advertised by firmware should have
already accounted for encap headroom.

Subtracting headroom twice brings the max MTU below what's necessary for
some deployments.

Fixes: 29a5dcae27 ("nfp: flower: offload phys port MTU change")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 15:28:01 -04:00
Vivien Didelot
a37fb855f6 net: dsa: fix added_by_user switchdev notification
Commit 161d82de1f ("net: bridge: Notify about !added_by_user FDB
entries") causes the below oops when bringing up a slave interface,
because dsa_port_fdb_add is still scheduled, but with a NULL address.

To fix this, keep the dsa_slave_switchdev_event function agnostic of the
notified info structure and handle the added_by_user flag in the
specific dsa_slave_switchdev_event_work function.

    [   75.512263] Unable to handle kernel NULL pointer dereference at virtual address 00000000
    [   75.519063] pgd = (ptrval)
    [   75.520545] [00000000] *pgd=00000000
    [   75.522839] Internal error: Oops: 17 [#1] ARM
    [   75.525898] Modules linked in:
    [   75.527673] CPU: 0 PID: 9 Comm: kworker/u2:1 Not tainted 4.17.0-rc2 #78
    [   75.532988] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
    [   75.538153] Workqueue: dsa_ordered dsa_slave_switchdev_event_work
    [   75.542970] PC is at mv88e6xxx_port_db_load_purge+0x60/0x1b0
    [   75.547341] LR is at mdiobus_read_nested+0x6c/0x78
    [   75.550833] pc : [<804cd5c0>]    lr : [<804bba84>]    psr: 60070013
    [   75.555796] sp : 9f54bd78  ip : 9f54bd87  fp : 9f54bddc
    [   75.559719] r10: 00000000  r9 : 0000000e  r8 : 9f6a6010
    [   75.563643] r7 : 00000000  r6 : 81203048  r5 : 9f6a6010  r4 : 9f6a601c
    [   75.568867] r3 : 00000000  r2 : 00000000  r1 : 0000000d  r0 : 00000000
    [   75.574094] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
    [   75.579933] Control: 10c53c7d  Table: 9de20059  DAC: 00000051
    [   75.584384] Process kworker/u2:1 (pid: 9, stack limit = 0x(ptrval))
    [   75.589349] Stack: (0x9f54bd78 to 0x9f54c000)
    [   75.592406] bd60:                                                       00000000 00000000
    [   75.599295] bd80: 00000391 9f299d10 9f299d68 8014317c 9f7f0000 8120af00 00006dc2 00000000
    [   75.606186] bda0: 8120af00 00000000 9f54bdec 1c9f5d92 8014317c 9f6a601c 9f6a6010 00000000
    [   75.613076] bdc0: 00000000 00000000 9dd1141c 8125a0b4 9f54be0c 9f54bde0 804cd8a8 804cd56c
    [   75.619966] bde0: 0000000e 80143680 00000001 9dce9c1c 81203048 9dce9c10 00000003 00000000
    [   75.626858] be00: 9f54be5c 9f54be10 806abcac 804cd864 9f54be54 80143664 8014317c 80143054
    [   75.633748] be20: ffcaa81d 00000000 812030b0 1c9f5d92 00000000 81203048 9f54beb4 00000003
    [   75.640639] be40: ffffffff 00000000 9dd1141c 8125a0b4 9f54be84 9f54be60 80138e98 806abb18
    [   75.647529] be60: 81203048 9ddc4000 9dce9c54 9f72a300 00000000 00000000 9f54be9c 9f54be88
    [   75.654420] be80: 801390bc 80138e50 00000000 9dce9c54 9f54beac 9f54bea0 806a9524 801390a0
    [   75.661310] bea0: 9f54bedc 9f54beb0 806a9c7c 806a950c 9f54becc 00000000 00000000 00000000
    [   75.668201] bec0: 9f540000 1c9f5d92 805fe604 9ddffc00 9f54befc 9f54bee0 806ab228 806a9c38
    [   75.675092] bee0: 806ab178 9ddffc00 9f4c1900 9f40d200 9f54bf34 9f54bf00 80131e30 806ab184
    [   75.681983] bf00: 9f40d214 9f54a038 9f40d200 9f40d200 9f4c1918 812119a0 9f40d214 9f54a038
    [   75.688873] bf20: 9f40d200 9f4c1900 9f54bf7c 9f54bf38 80132124 80131d1c 9f5f2dd8 00000000
    [   75.695764] bf40: 812119a0 9f54a038 812119a0 81259c5b 9f5f2dd8 9f5f2dc0 9f53dbc0 00000000
    [   75.702655] bf60: 9f4c1900 801320b4 9f5f2dd8 9f4f7e88 9f54bfac 9f54bf80 80137ad0 801320c0
    [   75.709544] bf80: 9f54a000 9f53dbc0 801379a0 00000000 00000000 00000000 00000000 00000000
    [   75.716434] bfa0: 00000000 9f54bfb0 801010e8 801379ac 00000000 00000000 00000000 00000000
    [   75.723324] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
    [   75.730206] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
    [   75.737083] Backtrace:
    [   75.738252] [<804cd560>] (mv88e6xxx_port_db_load_purge) from [<804cd8a8>] (mv88e6xxx_port_fdb_add+0x50/0x68)
    [   75.746795]  r10:8125a0b4 r9:9dd1141c r8:00000000 r7:00000000 r6:00000000 r5:9f6a6010
    [   75.753323]  r4:9f6a601c
    [   75.754570] [<804cd858>] (mv88e6xxx_port_fdb_add) from [<806abcac>] (dsa_switch_event+0x1a0/0x660)
    [   75.762238]  r8:00000000 r7:00000003 r6:9dce9c10 r5:81203048 r4:9dce9c1c
    [   75.767655] [<806abb0c>] (dsa_switch_event) from [<80138e98>] (notifier_call_chain+0x54/0x94)
    [   75.774893]  r10:8125a0b4 r9:9dd1141c r8:00000000 r7:ffffffff r6:00000003 r5:9f54beb4
    [   75.781423]  r4:81203048
    [   75.782672] [<80138e44>] (notifier_call_chain) from [<801390bc>] (raw_notifier_call_chain+0x28/0x30)
    [   75.790514]  r9:00000000 r8:00000000 r7:9f72a300 r6:9dce9c54 r5:9ddc4000 r4:81203048
    [   75.796982] [<80139094>] (raw_notifier_call_chain) from [<806a9524>] (dsa_port_notify+0x24/0x38)
    [   75.804483] [<806a9500>] (dsa_port_notify) from [<806a9c7c>] (dsa_port_fdb_add+0x50/0x6c)
    [   75.811371] [<806a9c2c>] (dsa_port_fdb_add) from [<806ab228>] (dsa_slave_switchdev_event_work+0xb0/0x10c)
    [   75.819635]  r4:9ddffc00
    [   75.820885] [<806ab178>] (dsa_slave_switchdev_event_work) from [<80131e30>] (process_one_work+0x120/0x3a4)
    [   75.829241]  r6:9f40d200 r5:9f4c1900 r4:9ddffc00 r3:806ab178
    [   75.833612] [<80131d10>] (process_one_work) from [<80132124>] (worker_thread+0x70/0x574)
    [   75.840415]  r10:9f4c1900 r9:9f40d200 r8:9f54a038 r7:9f40d214 r6:812119a0 r5:9f4c1918
    [   75.846945]  r4:9f40d200
    [   75.848191] [<801320b4>] (worker_thread) from [<80137ad0>] (kthread+0x130/0x160)
    [   75.854300]  r10:9f4f7e88 r9:9f5f2dd8 r8:801320b4 r7:9f4c1900 r6:00000000 r5:9f53dbc0
    [   75.860830]  r4:9f5f2dc0
    [   75.862076] [<801379a0>] (kthread) from [<801010e8>] (ret_from_fork+0x14/0x2c)
    [   75.867999] Exception stack(0x9f54bfb0 to 0x9f54bff8)
    [   75.871753] bfa0:                                     00000000 00000000 00000000 00000000
    [   75.878640] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
    [   75.885519] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
    [   75.890844]  r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:801379a0
    [   75.897377]  r4:9f53dbc0 r3:9f54a000
    [   75.899663] Code: e3a02000 e3a03000 e14b26f4 e24bc055 (e5973000)
    [   75.904575] ---[ end trace fbca818a124dbf0d ]---

Fixes: 816a3bed95 ("switchdev: Add fdb.added_by_user to switchdev notifications")
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 15:26:50 -04:00
Jon Maloy
5f30721c51 tipc: clean up removal of binding table items
In commit be47e41d77 ("tipc: fix use-after-free in tipc_nametbl_stop")
we fixed a problem caused by premature release of service range items.

That fix is correct, and solved the problem. However, it doesn't address
the root of the problem, which is that we don't lookup the tipc_service
 -> service_range -> publication items in the correct hierarchical
order.

In this commit we try to make this right, and as a side effect obtain
some code simplification.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 15:25:45 -04:00
Colin Ian King
680a284635 net/9p: fix spelling mistake: "suspsend" -> "suspend"
Trivial fix to spelling mistake in dev_warn message text

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 15:23:50 -04:00
Colin Ian King
39a2d5cbaa sctp: fix spelling mistake: "max_retans" -> "max_retrans"
Trivial fix to spelling mistake in error string

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 15:23:50 -04:00
Colin Ian King
9af5573f3a firestream: fix spelling mistake: "reseverd" -> "reserved"
Trivial fix to spelling mistake in res_strings string array

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 15:23:49 -04:00
David S. Miller
3ff519e6c9 Merge branch 'qed-rdma-fixes'
Michal Kalderon says:

====================
qed*: Rdma fixes

This patch series include two fixes for bugs related to rdma.
The first has to do with loading the driver over an iWARP
device.
The second fixes a previous commit that added proper link
indication for iWARP / RoCE.
====================

Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com>
2018-05-10 15:22:36 -04:00
Michal Kalderon
090477e4ac qede: Fix gfp flags sent to rdma event node allocation
A previous commit 4609adc271 ("qede: Fix qedr link update")
added a flow that could allocate rdma event objects from an
interrupt path (link notification). Therefore the kzalloc call
should be done with GFP_ATOMIC.

fixes: 4609adc271 ("qede: Fix qedr link update")
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 15:22:35 -04:00
Michal Kalderon
af6858ee42 qed: Fix l2 initializations over iWARP personality
If qede driver was loaded on a device configured for iWARP
the l2 mutex wouldn't be allocated, and some l2 related
resources wouldn't be freed.

fixes: c851a9dc43 ("qed: Introduce iWARP personality")
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 15:22:35 -04:00
Kirill Tkhai
f663706a33 tun: Do SIOCGSKNS out of rtnl_lock()
Since net ns of tun device is assigned on the device creation,
and it never changes, we do not need to use any lock to get it
from alive tun.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 15:16:49 -04:00
David S. Miller
508c461c63 Merge branch 'net-Update-static-keys-to-modern-api'
Davidlohr Bueso says:

====================
net: Update static keys to modern api

The following patches update pretty much all core net static key users
to the modern api. Changes are mostly trivial conversion without affecting
any semantics. The motivation is a resend of patches 1 and 2 from a while[1]
back, and the rest are added patches, specific for -net.

Applies against today's linux-next. Compile tested only.

[1] lkml.kernel.org/r/20180326210929.5244-1-dave@stgolabs.net
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 15:13:35 -04:00
Davidlohr Bueso
88ab31081b net/udp: Update udp_encap_needed static key to modern api
No changes in refcount semantics -- key init is false; replace

static_key_enable         with   static_branch_enable
static_key_slow_inc|dec   with   static_branch_inc|dec
static_key_false          with   static_branch_unlikely

Added a '_key' suffix to udp and udpv6 encap_needed, for better
self documentation.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 15:13:34 -04:00
Davidlohr Bueso
02786475c7 net: Update generic_xdp_needed static key to modern api
No changes in refcount semantics -- key init is false; replace

static_key_slow_inc|dec   with   static_branch_inc|dec
static_key_false          with   static_branch_unlikely

Added a '_key' suffix to generic_xdp_needed, for better self
documentation.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 15:13:34 -04:00
Davidlohr Bueso
39e8392201 net: Update netstamp_needed static key to modern api
No changes in refcount semantics -- key init is false; replace

static_key_slow_inc|dec   with   static_branch_inc|dec
static_key_false          with   static_branch_unlikely

Added a '_key' suffix to netstamp_needed, for better self
documentation.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 15:13:34 -04:00
Davidlohr Bueso
aabf6772cc net: Update [e/in]gress_needed static key to modern api
No changes in semantics -- key init is false; replace

static_key_slow_inc|dec   with   static_branch_inc|dec
static_key_false          with   static_branch_unlikely

Added a '_key' suffix to both ingress_needed and egress_needed,
for better self documentation.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 15:13:34 -04:00
Davidlohr Bueso
a7950ae821 net/sock: Update memalloc_socks static key to modern api
No changes in refcount semantics -- key init is false; replace

static_key_slow_inc|dec   with   static_branch_inc|dec
static_key_false          with   static_branch_unlikely

Added a '_key' suffix to memalloc_socks, for better self
documentation.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 15:13:34 -04:00
Davidlohr Bueso
5263a98f16 net/ipv4: Update ip_tunnel_metadata_cnt static key to modern api
No changes in refcount semantics -- key init is false; replace

static_key_slow_inc|dec   with   static_branch_inc|dec
static_key_false          with   static_branch_unlikely

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 15:13:33 -04:00
Al Viro
1c18d2a15e it's SB_BORN, not MS_BORN...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-05-10 15:09:41 -04:00
Evan Green
c7d2a0eb6c clk: qcom: Base rcg parent rate off plan frequency
_freq_tbl_determine_rate uses the pre_div found in the clock plan
multiplied by the requested rate from the caller to determine the
best parent rate to set. If the requested rate is not exactly equal
to the rate that was found in the clock plan, then using the requested
rate in parent rate calculations is incorrect. For instance, if 150MHz
was requested, but 200MHz was the match found, and that plan had a
pre_div of 3, then the parent should be set to 600MHz, not 450MHz.

Signed-off-by: Evan Green <evgreen@chromium.org>
Fixes: bcd61c0f53 ("clk: qcom: Add support for root clock generators (RCGs)")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-10 11:45:32 -07:00
Damien Le Moal
804689ad2d libata: Fix command retry decision
For failed commands with valid sense data (e.g. NCQ commands),
scsi_check_sense() is used in ata_analyze_tf() to determine if the
command can be retried. In such case, rely on this decision and ignore
the command error mask based decision done in ata_worth_retry().

This fixes useless retries of commands such as unaligned writes on zoned
disks (TYPE_ZAC).

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-05-10 11:43:20 -07:00
Damien Le Moal
7eb49509dd libata: Honor RQF_QUIET flag
Currently, libata ignores requests RQF_QUIET flag and print error
messages for failed commands, regardless if this flag is set in the
command request. Fix this by introducing the ata_eh_quiet() function and
using this function in ata_eh_link_autopsy() to determine if the EH
context should be quiet. This works by counting the number of failed
commands and the number of commands with the quiet flag set. If both
numbers are equal, the the EH context can be set to quiet and all error
messages suppressed. Otherwise, only the error messages for the failed
commands are suppressed and the link Emask and irq_stat messages printed.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-05-10 11:43:20 -07:00
Damien Le Moal
07b9b6d6e1 libata: Make ata_dev_set_mode() less verbose
For a successful setting of the device transfer speed mode in
ata_dev_set_mode(), do not print the message
"ataX.XX: configured for xxx" if the EH context has the quiet flag set,
unless the device port is being reset.

This preserves the output of the message during device scan but removes
it in the case of a simple device revalidation such as trigerred by
enabling the NCQ I/O priority feature of the device
e.g. echo 1 > /sys/block/sdxx/device/ncq_iprio_enable

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-05-10 11:43:20 -07:00
Damien Le Moal
54fb131b32 libata: Fix ata_err_string()
Add proper error string output for ATA_ERR_NCQ and ATA_ERR_NODEV_HINT
instead of returning "unknown error".

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-05-10 11:43:20 -07:00
Damien Le Moal
79487259a4 libata: Fix comment typo in ata_eh_analyze_tf()
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-05-10 11:43:19 -07:00
Linus Torvalds
94d7dbf108 - A stable fix for DM integrity to use kvfree.
- Fix for a 4.17-rc1 change to dm-bufio's buffer alignment.
 
 - Fixes for a few sparse warnings.
 
 - Remove VLA usage in DM mirror target.
 
 - Improve DM thinp Documentation for the "read_only" feature.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJa9Gn4AAoJEMUj8QotnQNa+6sH/0lu9XA7fpaopD29wPkjtFLg
 nDY8yCBrBvo1GRQBCAM3TWYDdTYLgO0srn24y9AM0AnhuiR+YFeDuoMyhzIQjWay
 X+RGgiMtLwroLWO9t7hhP1eK3u3SX+40bhvle6vNOn/KGb7XOuFnEksUJ85B9pJZ
 xF1aGos8+YIXTqBRP4RLJPWKPme1HIpdVGUcwnt9fW3J9PYzkN9xIry/cow0JWEl
 xmr69l2KpOQ7jVpcBhA52NDosW/LCOipyr9mhe0+lq60BDcsCbjCkK5p6F38Ufa8
 +24cqgdT2fdbogL3JTfs0lIgrOaLOhYmL5qJemopcxE6TKXvP6AzHhihlT48fNA=
 =w2u8
 -----END PGP SIGNATURE-----

Merge tag 'for-4.17/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - a stable fix for DM integrity to use kvfree

 - fix for a 4.17-rc1 change to dm-bufio's buffer alignment

 - fixes for a few sparse warnings

 - remove VLA usage in DM mirror target

 - improve DM thinp Documentation for the "read_only" feature

* tag 'for-4.17/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm thin: update Documentation to clarify when "read_only" is valid
  dm mirror: remove VLA usage
  dm: fix some sparse warnings and whitespace in dax methods
  dm cache background tracker: fix sparse warning
  dm bufio: fix buffer alignment
  dm integrity: use kvfree for kvmalloc'd memory
2018-05-10 11:42:01 -07:00
Christoph Hellwig
258c9fded4 sata_nv: don't use block layer bounce buffer
sata_nv sets the block bounce limit to the reduce dma mask for ATAPI
devices, which means that the iommu or swiotlb already take care of
the bounce buffering, and the block bouncing can be removed.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-05-10 11:37:28 -07:00
Jin Yao
04d2600ab6 perf annotate: Display all available events on --stdio
When we perform the following command lines:

  $ perf record -e "{cycles,branches}" ./div
  $ perf annotate main --stdio

The output shows only the first event, "cycles" and the displaying
format is not correct.

   Percent         |      Source code & Disassembly of div for cycles (44550 samples)
  -----------------------------------------------------------------------------------
                   :
                   :
                   :
                   :            Disassembly of section .text:
                   :
                   :            00000000004004b0 <main>:
                   :            main():
                   :
                   :                    return i;
                   :            }
                   :
                   :            int main(void)
                   :            {
      0.00 :   4004b0:       push   %rbx
                   :                    int i;
                   :                    int flag;
                   :                    volatile double x = 1212121212, y = 121212;
                   :
                   :                    s_randseed = time(0);
      0.00 :   4004b1:       xor    %edi,%edi
                   :                    srand(s_randseed);
      0.00 :   4004b3:       mov    $0x77359400,%ebx
                   :
                   :                    return i;
                   :            }

The issue is that the value of the 'nr_percent' variable is hardcoded to
1.  This patch fixes it.

With this patch, the output is:

   Percent         |      Source code & Disassembly of div for cycles (44550 samples)
  -----------------------------------------------------------------------------------
                   :
                   :
                   :
                   :            Disassembly of section .text:
                   :
                   :            00000000004004b0 <main>:
                   :            main():
                   :
                   :                    return i;
                   :            }
                   :
                   :            int main(void)
                   :            {
      0.00    0.00 :   4004b0:       push   %rbx
                   :                    int i;
                   :                    int flag;
                   :                    volatile double x = 1212121212, y = 121212;
                   :
                   :                    s_randseed = time(0);
      0.00    0.00 :   4004b1:       xor    %edi,%edi
                   :                    srand(s_randseed);
      0.00    0.00 :   4004b3:       mov    $0x77359400,%ebx
                   :
                   :                    return i;
                   :            }

Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: f681d593d1 ("perf annotate: Remove disasm__calc_percent() from disasm_line__print()")
Link: http://lkml.kernel.org/r/1525881435-4092-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-10 15:19:30 -03:00
Thomas Richter
f8207b987f perf test: "probe libc's inet_pton" fails on s390 due to missing inline
perf test "probe libc's inet_pton & backtrace it with ping" fails on
4.17.0rc3 on s/390. It turned out that function __inet_pton is reported
as inline:

  [root@s8360047 perf]# ./perf script -i /tmp/perf.data.111
  ping 12457 [000]  1584.478959: probe_libc:inet_pton: (3ffb5a347e8)
                    1347e8 __inet_pton (inlined)
                     f19d7 gaih_inet.constprop.5 (/usr/lib64/libc-2.24.so)
                     f4c3f __GI_getaddrinfo (inlined)
                      410b main (/usr/bin/ping)

Allow __inet_pton listed as inline.

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180503065837.71043-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-10 15:19:30 -03:00
Marek Behún
5bafeb6e7e net: dsa: mv88e6xxx: 88E6141/6341 SERDES support
The 88E6141/6341 switches (also known as Topaz) have 1 SGMII lane,
which can be configured the same way as the SERDES lane on 88E6390.

Signed-off-by: Marek Behun <marek.behun@nic.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 14:16:40 -04:00
Jose Abreu
4dbbe8dde8 net: stmmac: Add support for U32 TC filter using Flexible RX Parser
This adds support for U32 filter by using an HW only feature called
Flexible RX Parser. This allow us to match any given packet field with a
pattern and accept/reject or even route the packet to a specific DMA
channel.

Right now we only support acception or rejection of frame and we only
support simple rules. Though, the Parser has the flexibility of jumping to
specific rules as an if condition so complex rules can be established.

This is only supported in GMAC5.10+.

The following commands can be used to test this code:

	1) Setup an ingress qdisk:
	# tc qdisc add dev eth0 handle ffff: ingress

	2) Setup a filter (e.g. filter by IP):
	# tc filter add dev eth0 parent ffff: protocol ip u32 match ip \
		src 192.168.0.3 skip_sw action drop

In every tests performed we always used the "skip_sw" flag to make sure
only the RX Parser was involved.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Vitor Soares <soares@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 14:16:36 -04:00
Yunsheng Lin
b2641e2ad4 net: hns3: Add support of hardware rx-vlan-offload to HNS3 VF driver
This patch adds support of hardware rx-vlan-offload to VF driver.
VF uses mailbox to convey PF to configure the hardware.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 14:16:36 -04:00
Nisar Sayed
3e50d2da58 microchip_t1: Add driver for Microchip LAN87XX T1 PHYs
Add driver for Microchip LAN87XX T1 PHYs

This patch support driver for Microchp T1 PHYs.
There will be followup patches to this driver to support T1 PHY
features such as cable diagnostics, signal quality indicator(SQI),
sleep and wakeup (TC10) support.

Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10 14:16:36 -04:00
Ingo Molnar
49cf4a4b3f perf/urgent fixes:
. Revert "perf pmu: Fix pmu events parsing rule", as it broke Intel PT
   event description parsing (Arnaldo Carvalho de Melo)
 
 . Sync x86's cpufeatures.h and kvm UAPI headers with the kernel sources,
   suppressing the ABI drift warnings (Arnaldo Carvalho de Melo)
 
 - Remove duplicated entry for westmereep-dp in Intel's mapfile.csv (William Cohen)
 
 - Fix typo in 'perf bench numa' options description (Yisheng Xie)
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEELb9bqkb7Te0zijNb1lAW81NSqkAFAlrwqjEACgkQ1lAW81NS
 qkC0KA//e0Awa0tAI/VunTfmJzYg+Tgj8rA7PskRloQhIFtG5cSQlNGt1Tv5Xndl
 sdQ48y7InCRfizIhsjbP9D5RvSo/+nZyYVY1LSMuHdlJdom9zf4ufac2zEYAQNqj
 ois3ArpP32L0/3JRjqfb09938MwzT2rZ57zTL0PIS3/bTuetA+UACT0WyogryfKU
 YW1KV7LD5fJnBIqdDjzuDQsNh7h/TMcET02IfJs2QZ8KOJnWsmkez83Wr1DEmDg9
 TaxJEG7lgvzozR8gZSfKXZhw/PlsSQQU2seARqZ6hj7AYijiLdTK7RwFEk1IFVDt
 ZQg7EdExAwP/JFhBQjkDj+d0YH2S0zVBwsgVewgOfMlCMIy1NBricGgaFoJ0MZK8
 yNLdxPt1vqFKr9w35OIh06YH42h/nyLom610E3gM6xUFRxh+5gvx4pNMk3qFeDEG
 kNUkPaV5XQD7SsEs1OS0A58/QUO6tss1XD01x00gsHgJ8y79Ga0Gj5F38VD7Esd3
 S6ltDRamsWj28hsBpVVRBd5u24PON8SEHkJ/O5e/xOCdqQTgAgcVrPhMIY9xsjS3
 sXple6JNouROQ/4MMvpWc+PYIK5ldWhO9Dt/rdZGDkDyuwf5qcjICIZdmOf48rK5
 BwltM1aqvRqKDjeItfTBElCrHh0UV6jemX0jLg1c1ixiYiACUX0=
 =V08d
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-for-mingo-4.17-20180507' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

. Revert "perf pmu: Fix pmu events parsing rule", as it broke Intel PT
  event description parsing (Arnaldo Carvalho de Melo)

. Sync x86's cpufeatures.h and kvm UAPI headers with the kernel sources,
  suppressing the ABI drift warnings (Arnaldo Carvalho de Melo)

- Remove duplicated entry for westmereep-dp in Intel's mapfile.csv (William Cohen)

- Fix typo in 'perf bench numa' options description (Yisheng Xie)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-10 20:09:00 +02:00
Omar Sandoval
61445b56d0 sbitmap: warn if using smaller shallow depth than was setup
Make sure the user passed the right value to
sbitmap_queue_min_shallow_depth().

Acked-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-10 11:27:52 -06:00
Jens Axboe
2882064076 kyber-iosched: update shallow depth when setting up hardware queue
We don't expect the async depth to be smaller than the wake batch
count for sbitmap, but just in case, inform sbitmap of what shallow
depth kyber may use.

Acked-by: Paolo Valente <paolo.valente@linaro.org>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-10 11:27:46 -06:00
Jens Axboe
483b7bf2e4 bfq-iosched: update shallow depth to smallest one used
If our shallow depth is smaller than the wake batching of sbitmap,
we can introduce hangs. Ensure that sbitmap knows how low we'll go.

Acked-by: Paolo Valente <paolo.valente@linaro.org>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-10 11:27:41 -06:00
Omar Sandoval
a327553965 sbitmap: fix missed wakeups caused by sbitmap_queue_get_shallow()
The sbitmap queue wake batch is calculated such that once allocations
start blocking, all of the bits which are already allocated must be
enough to fulfill the batch counters of all of the waitqueues. However,
the shallow allocation depth can break this invariant, since we block
before our full depth is being utilized. Add
sbitmap_queue_min_shallow_depth(), which saves the minimum shallow depth
the sbq will use, and update sbq_calc_wake_batch() to take it into
account.

Acked-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-10 11:27:36 -06:00
Jens Axboe
bd7d4ef6a4 bfq-iosched: remove unused variable
bfqd->sb_shift was attempted used as a cache for the sbitmap queue
shift, but we don't need it, as it never changes. Kill it with fire.

Acked-by: Paolo Valente <paolo.valente@linaro.org>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-10 11:27:31 -06:00
Jens Axboe
f0635b8a41 bfq: calculate shallow depths at init time
It doesn't change, so don't put it in the per-IO hot path.

Acked-by: Paolo Valente <paolo.valente@linaro.org>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-10 11:27:29 -06:00
Jens Axboe
55141366de bfq-iosched: don't worry about reserved tags in limit_depth
Reserved tags are used for error handling, we don't need to
care about them for regular IO. The core won't call us for these
anyway.

Acked-by: Paolo Valente <paolo.valente@linaro.org>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-10 11:27:17 -06:00
Jens Axboe
17a5119932 blk-mq: don't call into depth limiting for reserved tags
It's not useful, they are internal and/or error handling recovery
commands.

Acked-by: Paolo Valente <paolo.valente@linaro.org>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-10 11:27:12 -06:00
John Garry
adf3457b4c HISI LPC: Add ACPI UART support
On the Huawei D03 development board the system UART is
the UART connected on the LPC bus.

The profile for the device driver required for this HW
is as follows:
 - platform driver
 - 16550
 - ACPI support
 - polling mode support
 - IO space support

In principle we should use the PNP driver (8250_dw.c) for
8250-devices with ACPI FW. However since this driver does
not support PNP devices, and modifying the PNP core code
to support it is not worth the effort, use the generic
8250 isa driver.

For this, we setup the pdev platform data for the serial
8250 port.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-05-10 17:45:52 +01:00
John Garry
99c0228d6f HISI LPC: Re-Add ACPI child enumeration support
Since we no longer use the MFD APIs to enumerate the
child devices on the bus, use the platform driver APIs
directly.

In this patch we iterate of the children devices for the
host, and create a platform device directly per child.

For the iterating, we match the child ACPI HID against a
known list of supported child devices and their respective
ACPIs HID, to find the device name and any other
supplementary data.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-05-10 17:35:46 +01:00
John Garry
332f632ec3 HISI LPC: Stop using MFD APIs
The MFD APIs should only be used by drivers in
drivers/mfd. It is not worth splitting the driver to have
separate parts in drivers/bus and drivers/mfd, so just
drop MFD API usage.

As a solution, we will use the platform device APIs directly
to achieve the same as we had when using MFD APIs.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2018-05-10 17:30:06 +01:00
Lukas Wunner
32bee8f48f can: hi311x: Work around TX complete interrupt erratum
When sending packets as fast as possible using "cangen -g 0 -i -x", the
HI-3110 occasionally latches the interrupt pin high on completion of a
packet, but doesn't set the TXCPLT bit in the INTF register.  The INTF
register contains 0x00 as if no interrupt has occurred.  Even waiting
for a few milliseconds after the interrupt doesn't help.

Work around this apparent erratum by instead checking the TXMTY bit in
the STATF register ("TX FIFO empty").  We know that we've queued up a
packet for transmission if priv->tx_len is nonzero.  If the TX FIFO is
empty, transmission of that packet must have completed.

Note that this is congruent with our handling of received packets, which
likewise gleans from the STATF register whether a packet is waiting in
the RX FIFO, instead of looking at the INTF register.

Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Akshay Bhat <akshay.bhat@timesys.com>
Cc: Casey Fitzpatrick <casey.fitzpatrick@timesys.com>
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Akshay Bhat <akshay.bhat@timesys.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-05-10 18:25:30 +02:00
Colin Ian King
9fd0c40451 cpupower: fix spelling mistake: "logilename" -> "logfilename"
Trivial fix to spelling mistake in dprintf message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-05-10 10:24:30 -06:00
Lukas Wunner
5cec9425b4 can: hi311x: Acquire SPI lock on ->do_get_berr_counter
hi3110_get_berr_counter() may run concurrently to the rest of the driver
but neglects to acquire the lock protecting access to the SPI device.
As a result, it and the rest of the driver may clobber each other's tx
and rx buffers.

We became aware of this issue because transmission of packets with
"cangen -g 0 -i -x" frequently hung.  It turns out that agetty executes
->do_get_berr_counter every few seconds via the following call stack:

    CPU: 2 PID: 1605 Comm: agetty
    [<7f3f7500>] (hi3110_get_berr_counter [hi311x])
    [<7f130204>] (can_fill_info [can_dev])
    [<80693bc0>] (rtnl_fill_ifinfo)
    [<806949ec>] (rtnl_dump_ifinfo)
    [<806b4834>] (netlink_dump)
    [<806b4bc8>] (netlink_recvmsg)
    [<8065f180>] (sock_recvmsg)
    [<80660f90>] (___sys_recvmsg)
    [<80661e7c>] (__sys_recvmsg)
    [<80661ec0>] (SyS_recvmsg)
    [<80108b20>] (ret_fast_syscall+0x0/0x1c)

agetty listens to netlink messages in order to update the login prompt
when IP addresses change (if /etc/issue contains \4 or \6 escape codes):
https://git.kernel.org/pub/scm/utils/util-linux/util-linux.git/commit/?id=e36deb6424e8

It's a useful feature, though it seems questionable that it causes CAN
bit error statistics to be queried.

Be that as it may, if hi3110_get_berr_counter() is invoked while a frame
is sent by hi3110_hw_tx(), bogus SPI transfers like the following may
occur:

    => 12 00             (hi3110_get_berr_counter() wanted to transmit
                          EC 00 to query the transmit error counter,
                          but the first byte was overwritten by
                          hi3110_hw_tx_frame())

    => EA 00 3E 80 01 FB (hi3110_hw_tx_frame() wanted to transmit a
                          frame, but the first byte was overwritten by
                          hi3110_get_berr_counter() because it wanted
                          to query the receive error counter)

This sequence hangs the transmission because the driver believes it has
sent a frame and waits for the interrupt signaling completion, but in
reality the chip has never sent away the frame since the commands it
received were malformed.

Fix by acquiring the SPI lock in hi3110_get_berr_counter().

I've scrutinized the entire driver for further unlocked SPI accesses but
found no others.

Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Akshay Bhat <akshay.bhat@timesys.com>
Cc: Casey Fitzpatrick <casey.fitzpatrick@timesys.com>
Cc: Stef Walter <stefw@redhat.com>
Cc: Karel Zak <kzak@redhat.com>
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Akshay Bhat <akshay.bhat@timesys.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-05-10 18:20:51 +02:00