Commit graph

766,491 commits

Author SHA1 Message Date
Souptick Joarder
8a8d9b2c38 gpu: drm: exynos: Change return type to vm_fault_t
Use new return type vm_fault_t for fault handler
in struct vm_operations_struct.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-05-09 09:27:25 +09:00
Inki Dae
bec923c50a Fixup pagefault issue of mixer driver
- it makes sure to check shadow register for interlace scan.
 - it corrects chroma_addr[1], height and vertical position values.
 And trivial cleanup
 - it just removes duplicated drm_bridge_attach.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJa8j7OAAoJEFc4NIkMQxK4s/8P/AgW0XmMYtKISiGDH9YIXrB/
 Y1i6Nyqbey/v5gLx5sKIAC4l0rfW06Lt1dcxRpN5T2iuwuMzClI8/NJ7RRje1QNM
 gAfTBtMQEayqaYtIIj2rBKE4ukuQE8wKGMKrlU9X4ccI/1a/Gc8plv4OJlYwOOtv
 ErqoZS40oRBwyt9EZX3MaFQriQh2zA/nGIcEbK0NPrkIBAy6bYEJEPmmnLAH7Vvs
 zzGyZX2i/6lRVlHx28PoO2TAuWT7laMVGOUJwR5lz57kQTE7Ua/k82ci1kpXUY5I
 F3jIUs83QqMiFT4+7sdKFuJ+X62Zs2SbXdtnvC0pA6d0/3wJKb8tGQ3yxKi5cuaD
 F6R6jCJcmldqFfsnmPDoL9ApyzSB7DfF8nynyVgkEkLDBfka4HXv4xI9q0mRj+/z
 v7qgw9hcO7yAKC+w56rn6jCz2QcUIqPDYlf+PAxUO8vNrJuGMo4SSimTMHSqJY/P
 3m/63BF+81GD4O+CIInq29PpAInvwCpKEL+TyFvnJIddltPEybyRCWS/HW18Uw/p
 n0kQKAfQ2rH+tj7IrcuJZ3ncfuWEZUQLQpqwHusrKUQP/JzOiDULC+lUMqXBt18x
 0nJcu6KOPX1eEPzpHz8RbShBKxz5epuODjVK88jr1PFO37CtHbGhyXrSd3YoMJaQ
 37FV0JlKUUPPhK+izHxK
 =aEUk
 -----END PGP SIGNATURE-----

Merge tag 'exynos-drm-fixes-for-v4.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into exynos-drm-next

Fixup pagefault issue of mixer driver
- it makes sure to check shadow register for interlace scan.
- it corrects chroma_addr[1], height and vertical position values.
And trivial cleanup
- it just removes duplicated drm_bridge_attach.
2018-05-09 09:27:08 +09:00
Antoine Tenart
2b999ba899 net: phy: sfp: handle cases where neither BR, min nor BR, max is given
When computing the bitrate using values read from an SFP module EEPROM,
we use the nominal BR plus BR,min and BR,max to determine the
boundaries. But in some cases BR,min and BR,max aren't provided, which
led the SFP code to end up having the nominal value for both the minimum
and maximum bitrate values. When using a passive cable, the nominal
value should be used as the maximum one, and there is no minimum one
so we should use 0.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-08 20:14:27 -04:00
Peter Rosin
6f2db7dc90 drm/exynos: hdmi: avoid duplicating drm_bridge_attach
drm_bridge_attach takes care of these assignments, so there is no need
to open-code them a second time.

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2018-05-09 09:04:57 +09:00
Marcus Folkesson
a5a45b7fcd Input: gamecon - avoid using __set_bit() for capabilities
input_set_capability() and input_set_abs_param() will do it for you.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-08 15:39:04 -07:00
Marcus Folkesson
89223a2b03 Input: as5011 - avoid using __set_bit() for capabilities
input_set_capability() and input_set_abs_param() will do it for you.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-08 15:36:02 -07:00
Marcus Folkesson
a01308031c Input: xpad - avoid using __set_bit() for capabilities
input_set_capability() and input_set_abs_param() will do it for you.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-08 15:35:47 -07:00
Leo Sperling
68c78d0155 Input: xpad - fix some coding style issues
Fix some coding style issues reported by checkpatch.pl. Mostly brackets
in macros, spacing and comment style.

Signed-off-by: Leo Sperling <leosperling97@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-05-08 15:35:25 -07:00
Tejun Heo
322579dcc8 libata: Blacklist some Sandisk SSDs for NCQ
Sandisk SSDs SD7SN6S256G and SD8SN8U256G are regularly locking up
regularly under sustained moderate load with NCQ enabled.  Blacklist
for now.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Cc: stable@vger.kernel.org
2018-05-08 14:28:01 -07:00
Wolfram Sang
77bade677c i2c: busses: remove superfluous ignoring of children for RPM
These days, the I2C core ensures that the embedded adapter device
ignores the PM states of its children already. Because the adapter
device is an opaque logical device, there is no need for drivers to
repeat that again.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-05-08 23:19:02 +02:00
Tobias Jordan
e6faa71034 i2c: axxia: enable clock before calling clk_get_rate()
axxia_i2c_init() uses clk_get_rate() for idev->i2c_clk. clk_get_rate()
should only be called if the clock is enabled, so ensure that by moving
the clk_prepare_enable() call before the call to axxia_i2c_init().

Found by Linux Driver Verification project (linuxtesting.org).

Fixes: 08678b850c ("i2c: axxia: Add I2C driver for AXM55xx")
Signed-off-by: Tobias Jordan <Tobias.Jordan@elektrobit.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-05-08 23:13:19 +02:00
Jens Axboe
782f569774 blk-wbt: throttle discards like background writes
Throttle discards like we would any background write. Discards should
be background activity, so if they are impacting foreground IO, then
we will throttle them down.

Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-08 15:11:02 -06:00
Jens Axboe
8bea609019 blk-wbt: pass in enum wbt_flags to get_rq_wait()
This is in preparation for having more write queues, in which
case we would have needed to pass in more information than just
a simple 'is_kswapd' boolean.

Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-08 15:10:56 -06:00
Jens Axboe
825843b0ad blk-wbt: account any writing command as a write
We currently special case WRITE and FLUSH, but we should really
just include any command with the write bit set. This ensures
that we account DISCARD.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-08 15:10:49 -06:00
Jens Axboe
af097f5d19 block: break discard submissions into the user defined size
Don't build discards bigger than what the user asked for, if the
user decided to limit the size by writing to 'discard_max_bytes'.

Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-08 15:10:44 -06:00
Andrea Parri
a9251553c2 Documentation: refcount-vs-atomic: Update reference to LKMM doc.
The LKMM project has moved to 'tools/memory-model/'.

Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-05-08 14:52:39 -06:00
Chris Wilson
0adb90d330 drm/i915: Annotate timeline lock nesting
CI noticed

<4>[   23.430701] ============================================
<4>[   23.430706] WARNING: possible recursive locking detected
<4>[   23.430713] 4.17.0-rc4-CI-CI_DRM_4156+ #1 Not tainted
<4>[   23.430720] --------------------------------------------
<4>[   23.430725] systemd-udevd/169 is trying to acquire lock:
<4>[   23.430732]         (ptrval) (&(&timeline->lock)->rlock){....}, at: move_to_timeline+0x48/0x12c [i915]
<4>[   23.430888]
                  but task is already holding lock:
<4>[   23.430894]         (ptrval) (&(&timeline->lock)->rlock){....}, at: i915_request_submit+0x1a/0x40 [i915]
<4>[   23.430995]
                  other info that might help us debug this:
<4>[   23.431002]  Possible unsafe locking scenario:

<4>[   23.431007]        CPU0
<4>[   23.431010]        ----
<4>[   23.431013]   lock(&(&timeline->lock)->rlock);
<4>[   23.431021]   lock(&(&timeline->lock)->rlock);
<4>[   23.431028]
                   *** DEADLOCK ***

<4>[   23.431036]  May be due to missing lock nesting notation

<4>[   23.431044] 5 locks held by systemd-udevd/169:
<4>[   23.431049]  #0:         (ptrval) (&dev->mutex){....}, at: __driver_attach+0x42/0xe0
<4>[   23.431065]  #1:         (ptrval) (&dev->mutex){....}, at: __driver_attach+0x50/0xe0
<4>[   23.431078]  #2:         (ptrval) (&dev->struct_mutex){+.+.}, at: i915_gem_init+0xca/0x630 [i915]
<4>[   23.431174]  #3:         (ptrval) (rcu_read_lock){....}, at: submit_notify+0x35/0x124 [i915]
<4>[   23.431271]  #4:         (ptrval) (&(&timeline->lock)->rlock){....}, at: i915_request_submit+0x1a/0x40 [i915]
<4>[   23.431369]
                  stack backtrace:
<4>[   23.431377] CPU: 0 PID: 169 Comm: systemd-udevd Not tainted 4.17.0-rc4-CI-CI_DRM_4156+ #1
<4>[   23.431385] Hardware name: Dell Inc.                 OptiPlex GX280               /0G8310, BIOS A04 02/09/2005
<4>[   23.431394] Call Trace:
<4>[   23.431403]  dump_stack+0x67/0x9b
<4>[   23.431411]  __lock_acquire+0xc67/0x1b50
<4>[   23.431421]  ? ring_buffer_lock_reserve+0x154/0x3f0
<4>[   23.431429]  ? lock_acquire+0xa6/0x210
<4>[   23.431435]  lock_acquire+0xa6/0x210
<4>[   23.431530]  ? move_to_timeline+0x48/0x12c [i915]
<4>[   23.431540]  _raw_spin_lock+0x2a/0x40
<4>[   23.431634]  ? move_to_timeline+0x48/0x12c [i915]
<4>[   23.431730]  move_to_timeline+0x48/0x12c [i915]
<4>[   23.431826]  __i915_request_submit+0xfa/0x280 [i915]
<4>[   23.431923]  i915_request_submit+0x25/0x40 [i915]
<4>[   23.432024]  i9xx_submit_request+0x11/0x140 [i915]
<4>[   23.432120]  submit_notify+0x8d/0x124 [i915]
<4>[   23.432202]  __i915_sw_fence_complete+0x81/0x250 [i915]
<4>[   23.432300]  __i915_request_add+0x31c/0x7c0 [i915]
<4>[   23.432395]  i915_gem_init+0x621/0x630 [i915]
<4>[   23.432476]  i915_driver_load+0xbee/0x10b0 [i915]
<4>[   23.432485]  ? trace_hardirqs_on_caller+0xe0/0x1b0
<4>[   23.432566]  i915_pci_probe+0x29/0x90 [i915]
<4>[   23.432574]  pci_device_probe+0xa1/0x130
<4>[   23.432582]  driver_probe_device+0x306/0x480
<4>[   23.432589]  __driver_attach+0xb7/0xe0
<4>[   23.432596]  ? driver_probe_device+0x480/0x480
<4>[   23.432602]  ? driver_probe_device+0x480/0x480
<4>[   23.432609]  bus_for_each_dev+0x74/0xc0
<4>[   23.432616]  bus_add_driver+0x15f/0x250
<4>[   23.432623]  ? 0xffffffffa02d7000
<4>[   23.432629]  driver_register+0x52/0xc0
<4>[   23.432635]  ? 0xffffffffa02d7000
<4>[   23.432642]  do_one_initcall+0x58/0x370
<4>[   23.432653]  ? do_init_module+0x1d/0x1ea
<4>[   23.432660]  ? rcu_read_lock_sched_held+0x6f/0x80
<4>[   23.432667]  ? kmem_cache_alloc_trace+0x282/0x2e0
<4>[   23.432675]  do_init_module+0x56/0x1ea
<4>[   23.432682]  load_module+0x2435/0x2b20
<4>[   23.432694]  ? __se_sys_finit_module+0xd3/0xf0
<4>[   23.432701]  __se_sys_finit_module+0xd3/0xf0
<4>[   23.432710]  do_syscall_64+0x55/0x190
<4>[   23.432717]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[   23.432724] RIP: 0033:0x7fa780782839
<4>[   23.432729] RSP: 002b:00007ffcea73e668 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
<4>[   23.432738] RAX: ffffffffffffffda RBX: 0000561a472a4b30 RCX: 00007fa780782839
<4>[   23.432745] RDX: 0000000000000000 RSI: 00007fa7804610e5 RDI: 000000000000000e
<4>[   23.432752] RBP: 00007fa7804610e5 R08: 0000000000000000 R09: 00007ffcea73e780
<4>[   23.432758] R10: 000000000000000e R11: 0000000000000246 R12: 0000000000000000
<4>[   23.432765] R13: 0000561a47296450 R14: 0000000000020000 R15: 0000561a472a4b30

but did not report it as an issue as it only occurred during the first
module on boot. This is due to the removal of the distinct global
timeline, and its separate lock class. So instead mark up the expected
nesting. An alternative would be to define a separate lock class for the
engine, but since we only expect to have a single point of nesting, we
can avoid having multiple lock classes for the struct.

Fixes: a89d1f921c ("drm/i915: Split i915_gem_timeline into individual timelines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Tested-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508153514.20251-1-chris@chris-wilson.co.uk
2018-05-08 21:47:33 +01:00
Chris Wilson
a33f084cc5 drm/i915: Remove unused i915_flip tracepoints
The i915_flip* tracepoints are no longer in use since the removal of CS
flip in commit 8b5d27b911 ("drm/i915: Remove intel_flip_work
infrastructure")

References: 8b5d27b911 ("drm/i915: Remove intel_flip_work infrastructure")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508151552.31024-1-chris@chris-wilson.co.uk
2018-05-08 20:52:07 +01:00
Matt Atwood
2f065d8ae9 drm/dp: Correctly mask DP_TRAINING_AUX_RD_INTERVAL values for DP 1.4
DP_TRAINING_AUX_RD_INTERVAL with DP 1.3 spec changed bit scheeme from 8
bits to 7 in DPCD 0x000e. The 8th bit is used to identify extended
receiver capabilities. For panels that use this new feature wait interval
would be increased by 512 ms, when spec is max 16 ms. This behavior is
described in table 2-158 of DP 1.4 spec address 0000eh.

With the introduction of DP 1.4 spec main link clock recovery was
standardized to 100 us regardless of TRAINING_AUX_RD_INTERVAL value.

To avoid breaking panels that are not spec compiant we now warn on
invalid values.

V2: commit title/message, masking all 7 bits, warn on out of spec values.
V3: commit message, make link train clock recovery follow DP 1.4 spec.
V4: style changes
V5: typo
V6: print statement revisions, DP_REV to DPCD_REV, comment correction
V7: typo
V8: Style
V9: Strip out DPCD_REV_XX into seperate patch
v10: DPCD_REV_XX to DP_DPCD_REV_XX

Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180504221800.17830-2-matthew.s.atwood@intel.com
2018-05-08 12:18:43 -07:00
Matt Atwood
0597017cd1 drm/dp: Add DP_DPCD_REV_XX to drm_dp_helper
As more differentation occurs between DP spec. Its useful to have these
as macros in a drm_dp_helper.

v2: DPCD_REV_XX to DP_DPCD_REV_XX

Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180504221800.17830-1-matthew.s.atwood@intel.com
2018-05-08 12:18:42 -07:00
Taniya Das
06391eddb6 clk: qcom: Add Global Clock controller (GCC) driver for SDM845
Add support for the global clock controller found on SDM845
based devices. This should allow most non-multimedia device
drivers to probe and control their clocks.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Amit Nischal <anischal@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-08 11:22:55 -07:00
Amit Nischal
7d99ced8f4 clk: qcom: Add support for BRANCH_HALT_SKIP flag for branch clocks
There could be few clocks where the clock status bit is not
required to be polled as the clock on/off would be controlled
by enabling/disabling external source. Add support for the
same by introducing new flag named as 'BRANCH_HALT_SKIP'.

Signed-off-by: Amit Nischal <anischal@codeaurora.org>
[sboyd@kernel.org: Rename flag to BRANCH_HALT_SKIP]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-08 11:22:55 -07:00
Amit Nischal
9ee38b21a2 clk: qcom: Add DT bindings for SDM845 gcc clock controller
Add compatible string and the include file for gcc clock
controller for SDM845.

Signed-off-by: Amit Nischal <anischal@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-08 11:22:55 -07:00
Stephen Boyd
88051f55de clk: qcom: Simplify gdsc status checking logic
The code is complicated because we want to check if the GDSC is enabled
or disabled based on different bits in different registers while the
GDSC hardware is slightly different across chips. Furthermore, we poll
the status of the enable or disable state by checking if the gdsc is
enabled or not, and then comparing that to if the gdsc is being enabled
or disabled. Let's push all that into one function, so we can ask if the
status matches what we want, either on or off. Then the call site can
just ask that question, and the logic to check that state can simply
return yes or no, and not 1 or 0 or 0 or 1 depending on if we're
enabling or disabling respectively.

Tested-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-08 11:22:55 -07:00
Amit Nischal
7ef6f11887 clk: qcom: Configure the RCGs to a safe source as needed
For some root clock generators, there could be child branches which are
controlled by an entity other than application processor subsystem. For
such RCGs, as per application processor subsystem clock driver, all of
its downstream clocks are disabled and RCG is in disabled state but in
reality downstream clocks can be left enabled before.

So in this scenario, when RCG is disabled as per clock driver's point of
view and when rate scaling request comes before downstream clock enable
request, then RCG fails to update its configuration because in reality
RCG is on and it expects its new source to already be in enable state but
in reality new source is off. In order to avoid having the RCG to go into
an invalid state, add support to update the CFG, M, N and D registers
during set_rate() without configuration update and defer the actual RCG
configuration update to be done during clk_enable() as at this point of
time, both its new parent and safe source will be already enabled and RCG
can safely switch to new parent.

During clk_disable() request, configure it to safe source as both its
parents, safe source and current parent will be enabled and RCG can
safely execute a switch.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Amit Nischal <anischal@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-08 11:22:55 -07:00
Dan Carpenter
31c6085562 firmware: arm_scmi: Use after free in scmi_create_protocol_device()
We need to return here instead of setting up the freed sdev device as a
transport.

Fixes: 907b6d1491 ("firmware: arm_scmi: add per-protocol channels support using idr objects")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2018-05-08 18:03:47 +01:00
Mauro Carvalho Chehab
18bcaa4e61 docs: driver-api: add clk documentation
The clk.rst is already in ReST format. So, move it to the
driver-api guide, where it belongs.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-05-08 10:09:24 -06:00
Mauro Carvalho Chehab
d8a121e3d5 docs: core-api: add circular-buffers documentation
The circular-buffers.txt is already in ReST format. So, move it to the
core-api guide, where it belongs.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-05-08 10:07:06 -06:00
Mauro Carvalho Chehab
de0f51e4b1 docs: core-api: add cachetlb documentation
The cachetlb.txt is already in ReST format. So, move it to the
core-api guide, where it belongs.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-05-08 10:02:34 -06:00
Mauro Carvalho Chehab
fe8703cc0d docs: admin-guide: add bcache documentation
The bcache.txt is already in ReST format. So, move it to the
admin guide, where it belongs.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-05-08 10:00:22 -06:00
Mauro Carvalho Chehab
2d93404f35 docs: */index.rst: Add newer documents to their respective index.rst
A number of new docs were added, but they're currently not on
the index.rst from the session they're supposed to be, causing
Sphinx warnings.

Add them.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-05-08 09:57:35 -06:00
Linus Torvalds
036db8bd96 Merge branch 'for-4.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
 "An earlier commit to add reset control for embedded ahci controllers
  affected some of the hardware specific drivers and got reverted for
  now.

  Other than that, just per-device workarounds and trivial changes"

* 'for-4.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  driver core: add __printf verification to __ata_ehi_pushv_desc
  ata: fix spelling mistake: "directon" -> "direction"
  libata: Apply NOLPM quirk for SanDisk SD7UB3Q*G1001 SSDs
  libata: Apply NOLPM quirk for SAMSUNG MZMPC128HBFU-000MV SSD
  ata: ahci: mvebu: override ahci_stop_engine for mvebu AHCI
  libahci: Allow drivers to override stop_engine
  Revert "ata: ahci-platform: add reset control support"
2018-05-08 05:40:17 -10:00
Linus Torvalds
93a0d34024 Pin control fixes for v4.17:
- Two major fixes for the Intel Cherryview and Sunrisepoint
   pin controllers, adjusting numberspaces so that they do
   get aligned with various messed-up numbers encoded into
   the BIOS.
 
 - A fix for the Meson driver GPIO pin range.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJa8aWcAAoJEEEQszewGV1zjSoQAK1lSHCY5WX309bNxES+uEhF
 YJs09sqNTS+6Y7ZFiLsq78akvNEJ299B1fcnWwc6m3JIBj6CbhBKIY5Olddt8WZU
 92LtRWEZ02dZKVTdRpf3uuxgSyHhnftWDQKSwfp9asFJn4L8a93UgW7ipC43S3+o
 yK52loDZ1qRVcICE6MFSCdHgVr9uWT+wk9pULzz9T/GN59Hixf+AS5r3dDZONK2c
 bVF3wL/c5pTvw+glVCcUP1DtuBJL9jYMtDcHPeQq1vmJsW2jr5EuoTSTPXpUUY0w
 taNA6s6kQSEmmxesOBg4/tbyoc6J15f9EIgOyQTs/falTQzjjvafDaKbsA8XXBJp
 6n7vqYrTrEY3siMtY+BaXo0oihNlgda8lLt6ok+PzJLyTYpBlhoLdKJVw0LQcQOo
 nuDpYubmbgUi1n4DvJfFL5fUWpRHASxwn3MfrgzTAn+vxL0fjFlM1PIV+yGmhaeC
 XgZFY2q/SlUCcVsMOSD9/SqxkMCVXPaEKQt9XvZfHzhTJDSpQoT04XVVIbAuEVQM
 OllBrGtccJSkU257ZDx86s4dECTTHIIN0TK+sFtsUk0kLGvwbZrYkdyArjRDsm9w
 XwzFQcIrmTwqNnqlkk0KnwWVgkcnQo+EodYDVsex7AtwpdIIvmD//2xLg3ZsDthe
 nYUSMyUfmHhsdZYt/FSP
 =fTEB
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
 "Here are three pin control fixes.

  The Intel fixes are the most serious and important things I had queued
  since it affects a large portion of deployed Chromebooks.

   - Two major fixes for the Intel Cherryview and Sunrisepoint pin
     controllers, adjusting numberspaces so that they get aligned with
     various messed-up numbers encoded into the BIOS.

   - A fix for the Meson driver GPIO pin range"

* tag 'pinctrl-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: sunrisepoint: Align GPIO number space with Windows
  pinctrl: cherryview: Associate IRQ descriptors to irqdomain
  pinctrl: meson-axg: fix the range of aobus bank
2018-05-08 05:37:17 -10:00
Linus Torvalds
89240c675e GPIO fixes for v4.17:
- Fix proper IRQ unmasking in the Aspeed driver.
 
 - Do not free unrequested descriptors on the errorpath when
   creating line handles from the userspace chardev
   requested GPIO lines.
 
 - Also fix the errorpath in the linehandle creation function.
 
 - Fix the get/set multiple GPIO lines for a few of the
   funky industrial GPIO cards on the ISA bus.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJa8ZjfAAoJEEEQszewGV1zkdUP/29+sFVtGti/3G9Njg2RWV9l
 dnmr+cyFeSS1YvG6MAsAPkWKp87MRPJoHDVOCqKPNUxCDXQODF1XFoGQfxTlmGdk
 Q2B99c2lOJsCsEjJOm6rmctJfkJDMhhxwl9334w7WsopnPG/kr7rO6zwECvpxeVR
 OpwZF8dLWpwC4+G7liAnh0Y0aVtO1E8k5aQg1pB8DUDARBmhaIOcN7sE6fezmQ7I
 iAy4+psQWfzGguGdR328YAhxcD+SgQmThh9/nQ/e/kjwC9HyTasXbDTyjv7GtXsX
 C9l4eUArnPLRwlM6VU3aNfWEjYjlwUZjElg5NXbZlcjDfmbXoCwsYtYI5S3yzAWr
 8HgUcT55D3ZDLbJE2VRoHqeZxUq/kXMgsP47jVbzFCmr9tK1/geER4TkY6v/qoRs
 gR+XWvxDvscG0dkjp0dRRuCo6HPANr2bsBED3atHs5hZhSjhJv+XZp8TuTmcKnaw
 HenTFtP/0orPw2/KodWYsenB4kiAL6MHTZecD75cRZGb9hkCMdnJRnr9R+wexHBg
 y1YQ0w0NbUQXJF7CqIRTkns5JUbPHCZEcdtPrpbdIV8GWYAOtEcdBwvI4j0f6Gn0
 5acydVD0BfU/2fEfs+uS9n0Cv+9a39B6qN9gyIxIX+FPJfNYIG2Kdk74sp2veQyi
 d7VYqR127VN66v8+aEbf
 =8XsF
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:
 "Sorry for lagging behind on sending the first batch of GPIO fixes for
  this cycle. Just too busy conferencing and the weather was too nice.

  Here it is anyway: some real important polishing on the error path
  facing userspace (tagged for stable as well) and some normal driver
  fixes.

   - Fix proper IRQ unmasking in the Aspeed driver.

   - Do not free unrequested descriptors on the errorpath when creating
     line handles from the userspace chardev requested GPIO lines.

   - Also fix the errorpath in the linehandle creation function.

   - Fix the get/set multiple GPIO lines for a few of the funky
     industrial GPIO cards on the ISA bus"

* tag 'gpio-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: pcie-idio-24: Fix off-by-one error in get_multiple loop
  gpio: pcie-idio-24: Fix port memory offset for get_multiple/set_multiple callbacks
  gpio: pci-idio-16: Fix port memory offset for get_multiple callback
  gpio: fix error path in lineevent_create
  gpioib: do not free unrequested descriptors
  gpio: fix aspeed_gpio unmask irq
2018-05-08 05:35:12 -10:00
John Johansen
52e7128ebb apparmor: fix '*seclen' is never less than zero
smatch warnings:
security/apparmor/secid.c:162 apparmor_secid_to_secctx() warn: unsigned '*seclen' is never less than zero.

vim +162 security/apparmor/secid.c

   140
   141	int apparmor_secid_to_secctx(u32 secid, char **secdata, u32 *seclen)
   142	{
   143		/* TODO: cache secctx and ref count so we don't have to recreate */
   144		struct aa_label *label = aa_secid_to_label(secid);
   145
   146		AA_BUG(!secdata);
   147		AA_BUG(!seclen);
   148
   149		if (!label)
   150			return -EINVAL;
   151
   152		if (secdata)
   153			*seclen = aa_label_asxprint(secdata, root_ns, label,
   154						    FLAG_SHOW_MODE | FLAG_VIEW_SUBNS |
   155						    FLAG_HIDDEN_UNCONFINED |
   156						    FLAG_ABS_ROOT, GFP_ATOMIC);
   157		else
   158			*seclen = aa_label_snxprint(NULL, 0, root_ns, label,
   159						    FLAG_SHOW_MODE | FLAG_VIEW_SUBNS |
   160						    FLAG_HIDDEN_UNCONFINED |
   161						    FLAG_ABS_ROOT);
 > 162		if (*seclen < 0)
   163			return -ENOMEM;
   164
   165		return 0;
   166	}
   167

Fixes: c092921219 ("apparmor: add support for mapping secids and using secctxes")
Signed-off-by: John Johansen <john.johansen@canonical.com>
2018-05-08 08:34:08 -07:00
Mike Rapoport
3ecf53e41a docs/vm: move numa_memory_policy.rst to Documentation/admin-guide/mm
The document describes userspace API and as such it belongs to
Documentation/admin-guide/mm

Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-05-08 09:31:31 -06:00
Mike Rapoport
1174bd849c docs/vm: numa_memory_policy: s/Linux memory policy/NUMA memory policy/
The document describes NUMA memory policy and as it is a part of the Linux
documentation it's obvious that this is Linux memory policy. Besides,
"Linux memory policy" may refer to other policies, e.g. memory hotplug
policy, and using term NUMA makes the documentation less ambiguous.

Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-05-08 09:31:27 -06:00
Mike Rapoport
42f44d124e docs/vm: numa_memory_policy: formatting and spelling updates
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-05-08 09:31:20 -06:00
Jonathan Corbet
4ffd41bce2 Merge branch 'features' into docs-next
Andrea Parri dice:

  This series provides the script 'features-refresh.sh', which operates on
  the arch support status files, and it applies this script to refresh the
  status files in place; previous discussions about this series are at [1].

  [1] http://lkml.kernel.org/r/1523205027-31786-1-git-send-email-andrea.parri@amarulasolutions.com
      http://lkml.kernel.org/r/1522774551-9503-1-git-send-email-andrea.parri@amarulasolutions.com
      http://lkml.kernel.org/r/20180328122211.GA25420@andrea
2018-05-08 09:29:02 -06:00
Andrea Parri
2bef69a385 Documentation/features/vm: Remove arch support status file for 'pte_special'
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-05-08 09:28:33 -06:00
Andrea Parri
aee17ebe00 Documentation/features/lib: Remove arch support status file for 'strncasecmp'
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-05-08 09:28:29 -06:00
Andrea Parri
0ca2840ff5 Documentation/features/locking: Use '!RWSEM_GENERIC_SPINLOCK' as Kconfig for 'rwsem-optimized'
Uses '!RWSEM_GENERIC_SPINLOCK' in place of 'Optimized asm/rwsem.h' as
Kconfig for 'rwsem-optimized': the new Kconfig expresses this feature
equivalently, while also enabling the script 'features-refresh.sh' to
operate on the corresponding arch support status file. Also refreshes
the status matrix by using the script 'features-refresh.sh'.

Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-05-08 09:28:25 -06:00
Andrea Parri
b466865916 Documentation/features/core: Add arch support status files for 'cBPF-JIT' and 'eBPF-JIT'
Commit 6077776b59 split 'HAVE_BPF_JIT' into cBPF and eBPF variant.
Adds arch support status files for the new variants, and removes the
status file corresponding to 'HAVE_BPT_JIT'. The new status matrices
were auto-generated using the script 'features-refresh.sh'.

Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-05-08 09:28:20 -06:00
Andrea Parri
7156fc2928 Documentation/features: Refresh the arch support status files in place
Now that the script 'features-refresh.sh' is available, uses this script
to refresh all the arch-support.txt files in place.

Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-05-08 09:27:48 -06:00
Andrea Parri
be99f610a1 Documentation/features: Add script that refreshes the arch support status files in place
Provides the script:

	Documentation/features/scripts/features-refresh.sh

which operates on the arch-support.txt files and refreshes them in place.

This way [1],

   "[...] we soft- decouple the refreshing of the entries from the
    introduction of the features, while still making it all easy to
    keep sync and to extend."

[1] http://lkml.kernel.org/r/20180328122211.GA25420@andrea

Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-05-08 09:27:12 -06:00
Randy Dunlap
f6dbf65b65 Documentation: block: cmdline-partition.txt fixes and additions
Make the description of the kernel command line option "blkdevparts"
a bit more flowing and readable.

Fix a few typos.
Add the optional <size> and <offset> suffixes.
Note that size can be "-" to indicate all of the remaining space.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Cai Zhiyong <caizhiyong@huawei.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-05-08 09:18:53 -06:00
Dong Bo
f318a44e15 vfio: fix documentation
Update vfio_add_group_dev description to match the current API.

Signed-off-by: Dong Bo <dongbo4@huawei.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-05-08 09:16:41 -06:00
Daniel Vetter
1897e8f394 doc: botching-up-ioctls: Make it clearer why structs must be padded
This came up in discussions when reviewing drm patches.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-05-08 08:51:03 -06:00
Ram Pai
5212213aa5 mm, powerpc, x86: define VM_PKEY_BITx bits if CONFIG_ARCH_HAS_PKEYS is enabled
VM_PKEY_BITx are defined only if CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
is enabled. Powerpc also needs these bits. Hence lets define the
VM_PKEY_BITx bits for any architecture that enables
CONFIG_ARCH_HAS_PKEYS.

Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-09 00:35:33 +10:00
David S. Miller
42f02130f9 linux-can-fixes-for-4.17-20180508
-----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEENrCndlB/VnAEWuH5k9IU1zQoZfEFAlrxYywTHG1rbEBwZW5n
 dXRyb25peC5kZQAKCRCT0hTXNChl8frFB/0REZC1xUNIZBMxfeIBn9wzyuRoF7S2
 qiJ/JJ/jIITR4xzbabnSHzvXFOvvwyywEnBSvwNAPtY4RQIo4JoAApONe1GUzfmY
 djFMERAf7sp5XjZhfdIenOQJ1bnIU87rZffgK3RbRfI3ciTgxb3HP9P5Ai2azmwR
 zrUsqmdcNBFGOg7gZpE6tiC0dzrZ5gFqzJ9D0/pbq6hxJ01h+dWoDHe2NJplWI8J
 nK60jXyRjlJLTffDnUxMFYYTXUoL7UwJdQWqtF6RE7GrPT4U+0L//O/RH0abC8bY
 qplLICtBe0KvU7YbXmkLKtq9HDOfymjCegA/qX0rLO4OhnofqSijo+fX
 =RtwO
 -----END PGP SIGNATURE-----

Merge tag 'linux-can-fixes-for-4.17-20180508' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2018-05-08

this is a pull request for 7 patches for net/master.

The first patch is by Jakob Unterwurzacher and increases the severity of
bus-off messages in the generic CAN device infrastructure. The next two patches
are by Uwe Kleine-König and fix the endianess detection in the flexcan driver.
Jimmy Assarsson's patch for the kvaser driver corrects the stats counter for
dropped tx-messages. Geert Uytterhoeven provides one patch and Sergei Shtylyov
two patches for the rcan_canfd device tree binding description.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-08 10:19:53 -04:00