Commit graph

766,491 commits

Author SHA1 Message Date
Chaitra P B
1537d1bfc5 scsi: mpt3sas: Increase event log buffer to support 24 port HBA's.
For 24 port HBA's events generated by IOC are more in certain cases and
the current circular buffer may be overwritten.Hence increased the event
log buffer to accommodate more events.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:34:20 -04:00
Chaitra P B
95540b8eaf scsi: mpt3sas: Added support for SAS Device Discovery Error Event.
The SAS Device Discovery Error Event is sent to the host when discovery
for a particular device is failed during discovery, even after maximum
retries by the IOC.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:34:20 -04:00
Chaitra P B
e21fef6f33 scsi: mpt3sas: Enhanced handling of Sense Buffer.
Enhanced DMA allocation for Sense Buffer, if the allocation does not fit
within same 4GB.Introduced is_MSB_are_same function to check if allocted
buffer within 4GB range or not.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:34:19 -04:00
Chaitra P B
74522a92bb scsi: mpt3sas: Optimize I/O memory consumption in driver.
For every IO, memory of PAGE size is allocated for handling NVMe native
PRPS. And in addition to that for every IO (chains need per IO * chain
buffer size, e.g. 38 * 128byte) amount of memory is allocated for chain
buffers.

However, at any point of time; the IO request can be for NVMe target
device (where PRP's page is used for framing PRP's) or can be for SCSI
target device (where chain buffers are used for framing chain
SGE's). This patch modifies the driver to reuse same pre-allocated PRP
page buffers as a chain buffer for IO's targeted for SCSI target
devices. No need to allocate separate buffers for chain SGE's buffers.

Suppose if the number of chain buffers need for IO doesn't fit in the
PRP Page size then driver maintain's separate buffers for those extra
chain buffers that exceeds the PRP page size. For example consider PRP
page size as 4K and chain buffer size as 128 bytes, then number of chain
buffers that can fit in PRP page is 4096/128 => 32. if the number of
chain buffer need per IO exceeds 32; for example consider number of
chains need per IO is 36 then for remaining 4 chain buffer's driver
allocates them individual.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:34:19 -04:00
Chaitra P B
93204b782a scsi: mpt3sas: Lockless access for chain buffers.
Introduces Chain lookup table/tracker and implements accessing chain
buffer using smid.  Removed link list based access of chain buffer which
requires lock and allocated as many chains needed.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:34:19 -04:00
Chaitra P B
cd33223b59 scsi: mpt3sas: Pre-allocate RDPQ Array at driver boot time.
Instead of allocating RDPQ array (This stores the address's of each RDPQ
pools) at run time, now it will be allocated once during driver load
time and same will be reused during host reset operation also (instead
of allocating & freeing this buffer on the fly during every host reset
operation) and then freed during driver unload.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:34:19 -04:00
Chaitra P B
cf6bf9710c scsi: mpt3sas: Bug fix for big endian systems.
This patch fixes sparse warnings and bugs on big endian systems.

Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:34:19 -04:00
Eric Dumazet
2c5d5b13c6 llc: better deal with too small mtu
syzbot loves to set very small mtu on devices, since it brings joy.
We must make llc_ui_sendmsg() fool proof.

usercopy: Kernel memory overwrite attempt detected to wrapped address (offset 0, size 18446612139802320068)!

kernel BUG at mm/usercopy.c:100!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 17464 Comm: syz-executor1 Not tainted 4.17.0-rc3+ #36
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:usercopy_abort+0xbb/0xbd mm/usercopy.c:88
RSP: 0018:ffff8801868bf800 EFLAGS: 00010282
RAX: 000000000000006c RBX: ffffffff87d2fb00 RCX: 0000000000000000
RDX: 000000000000006c RSI: ffffffff81610731 RDI: ffffed0030d17ef6
RBP: ffff8801868bf858 R08: ffff88018daa4200 R09: ffffed003b5c4fb0
R10: ffffed003b5c4fb0 R11: ffff8801dae27d87 R12: ffffffff87d2f8e0
R13: ffffffff87d2f7a0 R14: ffffffff87d2f7a0 R15: ffffffff87d2f7a0
FS:  00007f56a14ac700(0000) GS:ffff8801dae00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2bc21000 CR3: 00000001abeb1000 CR4: 00000000001426f0
DR0: 0000000020000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000030602
Call Trace:
 check_bogus_address mm/usercopy.c:153 [inline]
 __check_object_size+0x5d9/0x5d9 mm/usercopy.c:256
 check_object_size include/linux/thread_info.h:108 [inline]
 check_copy_size include/linux/thread_info.h:139 [inline]
 copy_from_iter_full include/linux/uio.h:121 [inline]
 memcpy_from_msg include/linux/skbuff.h:3305 [inline]
 llc_ui_sendmsg+0x4b1/0x1530 net/llc/af_llc.c:941
 sock_sendmsg_nosec net/socket.c:629 [inline]
 sock_sendmsg+0xd5/0x120 net/socket.c:639
 __sys_sendto+0x3d7/0x670 net/socket.c:1789
 __do_sys_sendto net/socket.c:1801 [inline]
 __se_sys_sendto net/socket.c:1797 [inline]
 __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1797
 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x455979
RSP: 002b:00007f56a14abc68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007f56a14ac6d4 RCX: 0000000000455979
RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000018
RBP: 000000000072bea0 R08: 00000000200012c0 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 0000000000000548 R14: 00000000006fbf60 R15: 0000000000000000
Code: 55 c0 e8 c0 55 bb ff ff 75 c8 48 8b 55 c0 4d 89 f9 ff 75 d0 4d 89 e8 48 89 d9 4c 89 e6 41 56 48 c7 c7 80 fa d2 87 e8 a0 0b a3 ff <0f> 0b e8 95 55 bb ff e8 c0 a8 f7 ff 8b 95 14 ff ff ff 4d 89 e8
RIP: usercopy_abort+0xbb/0xbd mm/usercopy.c:88 RSP: ffff8801868bf800

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-08 00:11:40 -04:00
Zhao Chen
724e47a149 net-next/hinic: add pci device ids for 25ge and 100ge card
This patch adds PCI device IDs to support 25GE and 100GE card:

1. Add device id 0x0201 for HINIC 100GE dual port card.
2. Add device id 0x0200 for HINIC 25GE dual port card.
3. Macro of device id 0x1822 is modified for HINIC 25GE quad port card.

Signed-off-by: Zhao Chen <zhaochen6@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-08 00:07:42 -04:00
David S. Miller
895b61760b Merge branch 'Aquantia-various-patches-2018-05'
Igor Russkikh says:

====================
Aquantia various patches 2018-05

These are two patches covering issues found during test cycles:

First is that driver should declare valid vlan_features
Second fix is about correct allocation of MSI interrupts on some systems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-08 00:06:45 -04:00
Igor Russkikh
a09bd81b54 net: aquantia: Limit number of vectors to actually allocated irqs
Driver should use pci_alloc_irq_vectors return value to correct number
of allocated vectors and napi instances. Otherwise it'll panic later
in pci_irq_vector.

Driver also should allow more than one MSI vectors to be allocated.

Error return path from pci_alloc_irq_vectors is also fixed to revert
resources in a correct sequence when error happens.

Reported-by: Long, Nicholas <nicholas.a.long@baesystems.com>
Fixes: 23ee07a ("net: aquantia: Cleanup pci functions module")
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-08 00:06:44 -04:00
Igor Russkikh
8c61ab7f11 net: aquantia: driver should correctly declare vlan_features bits
In particular, not reporting SG forced skbs to be linear for vlan
interfaces over atlantic NIC.

With this fix it is possible to enable SG feature on device and
therefore optimize performance.

Reported-by: Ma Yuying <yuma@redhat.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-08 00:06:44 -04:00
Georg Hofmann
a9f71d0de6 trivial: fix inconsistent help texts
This patch removes "experimental" from the help text where depends on
CONFIG_EXPERIMENTAL was already removed.

Signed-off-by: Georg Hofmann <georg@hofmannsweb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-08 00:05:11 -04:00
Steffen Klassert
5ed3fde213 MAINTAINERS: Update the 3c59x network driver entry
Replace my old E-Mail address with a working one.
While at it, change the maintainance status to
'Odd Fixes'. I'm still around with some knowledge,
but don't actively maintain it anymore.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-08 00:04:18 -04:00
Paolo Abeni
d869dea664 flow_dissector: do not rely on implicit casts
This change fixes a couple of type mismatch reported by the sparse
tool, explicitly using the requested type for the offending arguments.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-08 00:02:41 -04:00
Paolo Abeni
72a338bcc6 net: core: rework basic flow dissection helper
When the core networking needs to detect the transport offset in a given
packet and parse it explicitly, a full-blown flow_keys struct is used for
storage.
This patch introduces a smaller keys store, rework the basic flow dissect
helper to use it, and apply this new helper where possible - namely in
skb_probe_transport_header(). The used flow dissector data structures
are renamed to match more closely the new role.

The above gives ~50% performance improvement in micro benchmarking around
skb_probe_transport_header() and ~30% around eth_get_headlen(), mostly due
to the smaller memset. Small, but measurable improvement is measured also
in macro benchmarking.

v1 -> v2: use the new helper in eth_get_headlen() and skb_get_poff(),
  as per DaveM suggestion

Suggested-by: David Miller <davem@davemloft.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-08 00:02:36 -04:00
Jens Remus
fa89adba19 scsi: zfcp: fix infinite iteration on ERP ready list
zfcp_erp_adapter_reopen() schedules blocking of all of the adapter's
rports via zfcp_scsi_schedule_rports_block() and enqueues a reopen
adapter ERP action via zfcp_erp_action_enqueue(). Both are separately
processed asynchronously and concurrently.

Blocking of rports is done in a kworker by zfcp_scsi_rport_work(). It
calls zfcp_scsi_rport_block(), which then traces a DBF REC "scpdely" via
zfcp_dbf_rec_trig().  zfcp_dbf_rec_trig() acquires the DBF REC spin lock
and then iterates with list_for_each() over the adapter's ERP ready list
without holding the ERP lock. This opens a race window in which the
current list entry can be moved to another list, causing list_for_each()
to iterate forever on the wrong list, as the erp_ready_head is never
encountered as terminal condition.

Meanwhile the ERP action can be processed in the ERP thread by
zfcp_erp_thread(). It calls zfcp_erp_strategy(), which acquires the ERP
lock and then calls zfcp_erp_action_to_running() to move the ERP action
from the ready to the running list.  zfcp_erp_action_to_running() can
move the ERP action using list_move() just during the aforementioned
race window. It then traces a REC RUN "erator1" via zfcp_dbf_rec_run().
zfcp_dbf_rec_run() tries to acquire the DBF REC spin lock. If this is
held by the infinitely looping kworker, it effectively spins forever.

Example Sequence Diagram:

Process                ERP Thread             rport_work
-------------------    -------------------    -------------------
zfcp_erp_adapter_reopen()
zfcp_erp_adapter_block()
zfcp_scsi_schedule_rports_block()
lock ERP                                      zfcp_scsi_rport_work()
zfcp_erp_action_enqueue(ZFCP_ERP_ACTION_REOPEN_ADAPTER)
list_add_tail() on ready                      !(rport_task==RPORT_ADD)
wake_up() ERP thread                          zfcp_scsi_rport_block()
zfcp_dbf_rec_trig()    zfcp_erp_strategy()    zfcp_dbf_rec_trig()
unlock ERP                                    lock DBF REC
zfcp_erp_wait()        lock ERP
|                      zfcp_erp_action_to_running()
|                                             list_for_each() ready
|                      list_move()              current entry
|                        ready to running
|                      zfcp_dbf_rec_run()       endless loop over running
|                      zfcp_dbf_rec_run_lvl()
|                      lock DBF REC spins forever

Any adapter recovery can trigger this, such as setting the device offline
or reboot.

V4.9 commit 4eeaa4f3f1 ("zfcp: close window with unblocked rport
during rport gone") introduced additional tracing of (un)blocking of
rports. It missed that the adapter->erp_lock must be held when calling
zfcp_dbf_rec_trig().

This fix uses the approach formerly introduced by commit aa0fec6239
("[SCSI] zfcp: Fix sparse warning by providing new entry in dbf") that got
later removed by commit ae0904f60f ("[SCSI] zfcp: Redesign of the debug
tracing for recovery actions.").

Introduce zfcp_dbf_rec_trig_lock(), a wrapper for zfcp_dbf_rec_trig() that
acquires and releases the adapter->erp_lock for read.

Reported-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Jens Remus <jremus@linux.ibm.com>
Fixes: 4eeaa4f3f1 ("zfcp: close window with unblocked rport during rport gone")
Cc: <stable@vger.kernel.org> # 2.6.32+
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08 00:01:01 -04:00
David S. Miller
62515f95b4 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Minor conflict in ip_output.c, overlapping changes to
the body of an if() statement.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07 23:56:32 -04:00
David S. Miller
1822f638e8 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:

====================
pull request (net): ipsec 2018-05-07

1) Always verify length of provided sadb_key to fix a
   slab-out-of-bounds read in pfkey_add. From Kevin Easton.

2) Make sure that all states are really deleted
   before we check that the state lists are empty.
   Otherwise we trigger a warning.

3) Fix MTU handling of the VTI6 interfaces on
   interfamily tunnels. From Stefano Brivio.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07 23:51:30 -04:00
David S. Miller
9d4927f0d3 Merge branch 'ipv6-misc'
Tariq Toukan says:

====================
net/ipv6 misc

This patchset contains two patches for net/ipv6.

Patch 1 is a trivial typo fix in documentation.
Patch 2 by Eran is a re-spin. It adds GRO support for IPv6 GRE tunnel,
this significantly improves performance in case GRO in native interface
is disabled.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07 23:50:28 -04:00
Eran Ben Elisha
0c1dd2a162 net: ipv6/gre: Add GRO support
Add GRO capability for IPv6 GRE tunnel and ip6erspan tap, via gro_cells
infrastructure.

Performance testing: 55% higher badwidth.
Measuring bandwidth of 1 thread IPv4 TCP traffic over IPv6 GRE tunnel
while GRO on the physical interface is disabled.
CPU: Intel Xeon E312xx (Sandy Bridge)
NIC: Mellanox Technologies MT27700 Family [ConnectX-4]
Before (GRO not working in tunnel) : 2.47 Gbits/sec
After  (GRO working in tunnel)     : 3.85 Gbits/sec

Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
CC: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07 23:50:27 -04:00
Tariq Toukan
6f2f8212bf net: ipv6: Fix typo in ipv6_find_hdr() documentation
Fix 'an' into 'and', and use a comma instead of a period.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07 23:50:27 -04:00
Andre Tomt
080324c36a net/tls: Fix connection stall on partial tls record
In the case of writing a partial tls record we forgot to clear the
ctx->in_tcp_sendpages flag, causing some connections to stall.

Fixes: c212d2c7fc ("net/tls: Don't recursively call push_record during tls_write_space callbacks")
Signed-off-by: Andre Tomt <andre@tomt.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07 23:47:58 -04:00
Wolfram Sang
53bc017f72 net: flow_dissector: fix typo 'can by' to 'can be'
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07 23:47:05 -04:00
David S. Miller
db0aeb3100 Merge branch 'qed-Add-support-for-new-multi-partitioning-modes'
Sudarsana Reddy Kalluru says:

====================
qed*: Add support for new multi partitioning modes.

The patch series simplifies the multi function (MF) mode implementation of
qed/qede drivers, and adds support for new MF modes.

Please consider applying it to net-next branch.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07 23:46:11 -04:00
Sudarsana Reddy Kalluru
cac6f69154 qed: Add support for Unified Fabric Port.
This patch adds driver changes for supporting the Unified Fabric Port
(UFP). This is a new paritioning mode wherein MFW provides the set of
parameters to be used by the device such as traffic class, outer-vlan
tag value, priority type etc. Drivers receives this info via notifications
from mfw and configures the hardware accordingly.

Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07 23:46:10 -04:00
Sudarsana Reddy Kalluru
b51bdfb9cb qed: Add support for multi function mode with 802.1ad tagging.
The patch adds support for new Multi function mode wherein the traffic
classification is done based on the 802.1ad tagging and the outer vlan tag
provided by the management firmware.

Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07 23:46:10 -04:00
Sudarsana Reddy Kalluru
27bf96e32c qed: Remove unused data member 'is_mf_default'.
The data member 'is_mf_default' is not used by the qed/qede drivers,
removing the same.

Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07 23:46:10 -04:00
Sudarsana Reddy Kalluru
0bc5fe8572 qed*: Refactor mf_mode to consist of bits.
`mf_mode' field indicates the multi-partitioning mode the device is
configured to. This method doesn't scale very well, adding a new MF mode
requires going over all the existing conditions, and deciding whether those
are needed for the new mode or not.
The patch defines a set of bit-fields for modes which are derived according
to the mode info shared by the MFW and all the configuration would be made
according to those. To add a new mode, there would be a single place where
we'll need to go and choose which bits apply and which don't.

Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07 23:46:10 -04:00
Andrew Lunn
9255bacd57 net: dsa: mv88e6xxx: Fix PHY interrupts by parameterising PHY base address
Most of the mv88e6xxx switches have the PHYs at address 0, 1, 2, ...
The 6341 however has the PHYs at 0x10, 0x11, 0x12. Add a parameter to
the info structure for this base address.

Testing of 6f88284f3b ("net: dsa: mv88e6xxx: Add MDIO interrupts for
internal PHYs") was performed on the 6341. So it works only on the
6341. Use this base information to correctly set the interrupt.

Fixes: 6f88284f3b ("net: dsa: mv88e6xxx: Add MDIO interrupts for internal PHYs")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07 23:41:58 -04:00
Eric Dumazet
98f0a39529 tls: fix use after free in tls_sk_proto_close
syzbot reported a use-after-free in tls_sk_proto_close

Add a boolean value to cleanup a bit this function.

BUG: KASAN: use-after-free in tls_sk_proto_close+0x8ab/0x9c0 net/tls/tls_main.c:297
Read of size 1 at addr ffff8801ae40a858 by task syz-executor363/4503

CPU: 0 PID: 4503 Comm: syz-executor363 Not tainted 4.17.0-rc3+ #34
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1b9/0x294 lib/dump_stack.c:113
 print_address_description+0x6c/0x20b mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:430
 tls_sk_proto_close+0x8ab/0x9c0 net/tls/tls_main.c:297
 inet_release+0x104/0x1f0 net/ipv4/af_inet.c:427
 inet6_release+0x50/0x70 net/ipv6/af_inet6.c:460
 sock_release+0x96/0x1b0 net/socket.c:594
 sock_close+0x16/0x20 net/socket.c:1149
 __fput+0x34d/0x890 fs/file_table.c:209
 ____fput+0x15/0x20 fs/file_table.c:243
 task_work_run+0x1e4/0x290 kernel/task_work.c:113
 exit_task_work include/linux/task_work.h:22 [inline]
 do_exit+0x1aee/0x2730 kernel/exit.c:865
 do_group_exit+0x16f/0x430 kernel/exit.c:968
 get_signal+0x886/0x1960 kernel/signal.c:2469
 do_signal+0x98/0x2040 arch/x86/kernel/signal.c:810
 exit_to_usermode_loop+0x28a/0x310 arch/x86/entry/common.c:162
 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline]
 syscall_return_slowpath arch/x86/entry/common.c:265 [inline]
 do_syscall_64+0x6ac/0x800 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4457b9
RSP: 002b:00007fdf4d766da8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: fffffffffffffe00 RBX: 00000000006dac3c RCX: 00000000004457b9
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000006dac3c
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dac38
R13: 3692738801137283 R14: 6bf92c39443c4c1d R15: 0000000000000006

Allocated by task 4498:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:448
 set_track mm/kasan/kasan.c:460 [inline]
 kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553
 kmem_cache_alloc_trace+0x152/0x780 mm/slab.c:3620
 kmalloc include/linux/slab.h:512 [inline]
 kzalloc include/linux/slab.h:701 [inline]
 create_ctx net/tls/tls_main.c:521 [inline]
 tls_init+0x1f9/0xb00 net/tls/tls_main.c:633
 tcp_set_ulp+0x1bc/0x520 net/ipv4/tcp_ulp.c:153
 do_tcp_setsockopt.isra.39+0x44a/0x2600 net/ipv4/tcp.c:2588
 tcp_setsockopt+0xc1/0xe0 net/ipv4/tcp.c:2893
 sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3039
 __sys_setsockopt+0x1bd/0x390 net/socket.c:1903
 __do_sys_setsockopt net/socket.c:1914 [inline]
 __se_sys_setsockopt net/socket.c:1911 [inline]
 __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1911
 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 4503:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:448
 set_track mm/kasan/kasan.c:460 [inline]
 __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521
 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
 __cache_free mm/slab.c:3498 [inline]
 kfree+0xd9/0x260 mm/slab.c:3813
 tls_sw_free_resources+0x2a3/0x360 net/tls/tls_sw.c:1037
 tls_sk_proto_close+0x67c/0x9c0 net/tls/tls_main.c:288
 inet_release+0x104/0x1f0 net/ipv4/af_inet.c:427
 inet6_release+0x50/0x70 net/ipv6/af_inet6.c:460
 sock_release+0x96/0x1b0 net/socket.c:594
 sock_close+0x16/0x20 net/socket.c:1149
 __fput+0x34d/0x890 fs/file_table.c:209
 ____fput+0x15/0x20 fs/file_table.c:243
 task_work_run+0x1e4/0x290 kernel/task_work.c:113
 exit_task_work include/linux/task_work.h:22 [inline]
 do_exit+0x1aee/0x2730 kernel/exit.c:865
 do_group_exit+0x16f/0x430 kernel/exit.c:968
 get_signal+0x886/0x1960 kernel/signal.c:2469
 do_signal+0x98/0x2040 arch/x86/kernel/signal.c:810
 exit_to_usermode_loop+0x28a/0x310 arch/x86/entry/common.c:162
 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline]
 syscall_return_slowpath arch/x86/entry/common.c:265 [inline]
 do_syscall_64+0x6ac/0x800 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8801ae40a800
 which belongs to the cache kmalloc-256 of size 256
The buggy address is located 88 bytes inside of
 256-byte region [ffff8801ae40a800, ffff8801ae40a900)
The buggy address belongs to the page:
page:ffffea0006b90280 count:1 mapcount:0 mapping:ffff8801ae40a080 index:0x0
flags: 0x2fffc0000000100(slab)
raw: 02fffc0000000100 ffff8801ae40a080 0000000000000000 000000010000000c
raw: ffffea0006bea9e0 ffffea0006bc94a0 ffff8801da8007c0 0000000000000000
page dumped because: kasan: bad access detected

Fixes: dd0bed1665 ("tls: support for Inline tls record")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Atul Gupta <atul.gupta@chelsio.com>
Cc: Steve Wise <swise@opengridcomputing.com>
Cc: Ilya Lesokhin <ilyal@mellanox.com>
Cc: Aviad Yehezkel <aviadye@mellanox.com>
Cc: Dave Watson <davejwatson@fb.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07 23:40:26 -04:00
Xin Long
59d8d4434f sctp: delay the authentication for the duplicated cookie-echo chunk
Now sctp only delays the authentication for the normal cookie-echo
chunk by setting chunk->auth_chunk in sctp_endpoint_bh_rcv(). But
for the duplicated one with auth, in sctp_assoc_bh_rcv(), it does
authentication first based on the old asoc, which will definitely
fail due to the different auth info in the old asoc.

The duplicated cookie-echo chunk will create a new asoc with the
auth info from this chunk, and the authentication should also be
done with the new asoc's auth info for all of the collision 'A',
'B' and 'D'. Otherwise, the duplicated cookie-echo chunk with auth
will never pass the authentication and create the new connection.

This issue exists since very beginning, and this fix is to make
sctp_assoc_bh_rcv() follow the way sctp_endpoint_bh_rcv() does
for the normal cookie-echo chunk to delay the authentication.

While at it, remove the unused params from sctp_sf_authenticate()
and define sctp_auth_chunk_verify() used for all the places that
do the delayed authentication.

v1->v2:
  fix the typo in changelog as Marcelo noticed.

Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07 23:39:10 -04:00
Sun Lianwen
3a443bd6dd net/9p: correct the variable name in v9fs_get_trans_by_name() comment
The v9fs_get_trans_by_name(char *s) variable name is not "name" but "s".

Signed-off-by: Sun Lianwen <sunlw.fnst@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07 23:38:15 -04:00
Sun Lianwen
84a2fba2cb vlan: correct the file path in vlan_dev_change_flags() comment
The vlan_flags enum is defined in include/uapi/linux/if_vlan.h file.
not in include/linux/if_vlan.h file.

Signed-off-by: Sun Lianwen <sunlw.fnst@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07 23:37:30 -04:00
David S. Miller
01adc4851a Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Minor conflict, a CHECK was placed into an if() statement
in net-next, whilst a newline was added to that CHECK
call in 'net'.  Thanks to Daniel for the merge resolution.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07 23:35:08 -04:00
Weilin Chang
18b338f5f9 liquidio: support use of ethtool to set link speed of CN23XX-225 cards
Support setting the link speed of CN23XX-225 cards (which can do 25Gbps or
10Gbps) via ethtool_ops.set_link_ksettings.

Also fix the function assigned to ethtool_ops.get_link_ksettings to use the
new link_ksettings api completely (instead of partially via
ethtool_convert_legacy_u32_to_link_mode).

Signed-off-by: Weilin Chang <weilin.chang@cavium.com>
Acked-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07 23:31:23 -04:00
Moritz Fischer
a86b74d363 net: nixge: Address compiler warnings about signedness
Fixes the following warnings:
warning: pointer targets in passing argument 1 of
‘is_valid_ether_addr’ differ in signedness [-Wpointer-sign]
  if (mac_addr && is_valid_ether_addr(mac_addr)) {
                                      ^~~~~~~~
expected ‘const u8 * {aka const unsigned char *}’ but argument
is of type ‘const char *’
 static inline bool is_valid_ether_addr(const u8 *addr)
                    ^~~~~~~~~~~~~~~~~~~
warning: pointer targets in passing argument 2 of
‘ether_addr_copy’ differ in signedness [-Wpointer-sign]
   ether_addr_copy(ndev->dev_addr, mac_addr);
                                   ^~~~~~~~
expected ‘const u8 * {aka const unsigned char *}’ but argument
is of type ‘const char *’
 static inline void ether_addr_copy(u8 *dst, const u8 *src)

Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07 23:30:03 -04:00
Moritz Fischer
abcd3d6fc6 net: nixge: Fix error path for obtaining mac address
Fix issue where nixge_get_nvmem_address() returns a non-NULL
return value on a failed nvmem_cell_get() that causes an invalid
access when error value encoded in pointer is dereferenced.

Furthermore ensure that buffer allocated by nvmem_cell_read()
actually gets kfreed() if the function succeeds.

Fixes commit 492caffa8a ("net: ethernet: nixge: Add support for
National Instruments XGE netdev")
Reported-by: Alex Williams <alex.williams@ni.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07 23:30:03 -04:00
Anders Roxell
1751eb42dd selftests: net: use TEST_PROGS_EXTENDED
When a script file that isn't generated uses the variable
TEST_GEN_PROGS_EXTENDED and a 'make -C tools/testing/selftests clean' is
performed the script file gets removed and git shows the file as
deleted. For script files that isn't generated TEST_PROGS_EXTENDED
should be used.

Fixes: 9faedd643f ("selftests: net: add in_netns.sh TEST_GEN_PROGS_EXTENDED")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07 23:28:40 -04:00
David S. Miller
7f625bdf33 Merge branch '3c59x-patches-and-the-removal-of-an-unused-function'
Sebastian Andrzej Siewior says:

====================
3c59x patches and the removal of an unused function

The first patch removes an unused function. The goal of remaining three
patches is to get rid of the local_irq_save() usage in the driver which
benefits -RT.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07 23:25:25 -04:00
Anna-Maria Gleixner
dea4c96e65 net: 3com: 3c59x: irq save variant of ISR
When vortex_boomerang_interrupt() is invoked from vortex_tx_timeout() or
poll_vortex() interrupts must be disabled. This detaches the interrupt
disable logic from locking which requires patching for PREEMPT_RT.

The advantage of avoiding spin_lock_irqsave() in the interrupt handler is
minimal, but converting it removes all the extra code for callers which
come not from interrupt context.

Cc: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07 23:25:25 -04:00
Anna-Maria Gleixner
47f66c766c net: 3com: 3c59x: Pull locking out of ISR
Locking is done in the same way in _vortex_interrupt() and
_boomerang_interrupt(). To prevent duplication, move the locking into the
calling vortex_boomerang_interrupt() function.

No functional change.

Cc: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07 23:25:24 -04:00
Anna-Maria Gleixner
577b995be5 net: 3com: 3c59x: Move boomerang/vortex conditional into function
If vp->full_bus_master_tx is set, vp->full_bus_master_rx is set as well
(see vortex_probe1()). Therefore the conditionals for the decision if
boomerang or vortex ISR is executed have the same result. Instead of
repeating the explicit conditional execution of the boomerang/vortex ISR,
move it into an own function.

No functional change.

Cc: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07 23:25:24 -04:00
Anna-Maria Gleixner
c36a68fab1 net: u64_stats_sync: Remove functions without user
Commit 67db3e4bfb ("tcp: no longer hold ehash lock while calling
tcp_get_info()") removes the only users of u64_stats_update_end/begin_raw()
without removing the function in header file.

Remove no longer used functions.

Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07 23:25:24 -04:00
Anders Roxell
6328c95ce7 selftests: net: add udpgso* to TEST_GEN_FILES
The generated files udpgso* shouldn't be part of TEST_PROGS, they are
used by udpgso.sh and udpgsp_bench.sh. They should be added to the
TEST_GEN_FILES to get installed without being added to the main
run_kselftest.sh script.

Fixes: 3a687bef14 ("selftests: udp gso benchmark")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07 23:22:09 -04:00
Paulo Zanoni
145ef0d17d drm/i915/icl: compute the MG PLL registers
This implements the "MG PLL Programming" sequence from our spec. The
biggest problem was that the spec assumes real numbers, so we had to
adjust some numbers and calculations due to the fact that the Kernel
prefers to deal with integers.

I recommend grabbing some coffee, a pen and paper before reviewing
this patch.

v2:
 - Correctly identify DP encoders after upstream change.
 - Small checkpatch issues.
 - Rebase.
v3:
 - Try to impove the comment on the tdc_targetcnt calculation based on
   Manasi's feedback (Manasi).
 - Rebase.

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-7-paulo.r.zanoni@intel.com
2018-05-07 16:49:57 -07:00
Paulo Zanoni
bb82139b4b drm/i915/icl: compute the combo PHY (DPLL) DP registers
Just use the hardcoded tables provided by our spec.

v2: Rebase.
v3: Clarify that 38.4 uses the 19.2 table (James).

Reviewed-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-6-paulo.r.zanoni@intel.com
2018-05-07 16:44:54 -07:00
Paulo Zanoni
febafb9318 drm/i915/icl: compute the combo PHY (DPLL) HDMI registers
HDMI mode DPLL programming on ICL is the same as CNL, so just reuse
the CNL code.

v2:
 - Properly detect HDMI crtcs.
 - Rebase after changes to the cnl function (clock * 1000).
v3:
 - Add a comment to clarify why we treat 38.4 as 19.2 (James).

Reviewed-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-5-paulo.r.zanoni@intel.com
2018-05-07 16:44:08 -07:00
Paulo Zanoni
c27e917e2b drm/i915/icl: add basic support for the ICL clocks
This commit introduces the definitions for the ICL clocks and adds the
basic functions to the shared DPLL framework. It adds code for the
Enable and Disable sequences for some PLLs, but it does not have the
code to compute the actual PLL values, which are marked as TODO
comments and should be introduced as separate commits.

Special thanks to James Ausmus for investigating and fixing a bug with
the placement of icl_unmap_plls_to_ports() function.

v2:
 - Rebase around dpll_lock changes.
v3:
 - The spec now says what the timeouts should be.
 - Touch DPCLKA_CFGCR0_ICL at the appropriate time so we don't freeze
   the machine.
 - Checkpatch found a white space problem.
 - Small adjustments before upstreaming.
v4:
 - Move the ICL checks out of the *map_plls_to_ports() functions
  (James)
 - Add extra encoder check (James)
 - Call icl_unmap_plls_to_ports() later (James)
v5:
 - Rebase after the pll struct changes.
v6:
 - Properly make the unmap function based on encoders_post_disable()
   with regarding to checks and iterators.
 - Address checkpatch comment on "min = max = x()".

Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180427231436.9353-1-paulo.r.zanoni@intel.com
2018-05-07 16:42:47 -07:00
Alexandru Gagniuc
5d0b401f4c PCI/AER: Unify error bit printing for native and CPER reporting
AER errors can be reported natively (Linux AER driver fields interrupts and
reads error state directly from hardware) or via the ACPI/APEI/GHES/CPER
path (platform firmware reads error state from hardware and sends it to
Linux via ACPI interfaces).

Previously the same error would produce different output depending on
whether it was reported natively or via ACPI.  The CPER path resulted in
hard-to-understand messages, without a prefix. Instead use
__aer_print_error() for both native AER and CPER to provide a more
consistent log format.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-07 17:07:21 -05:00