Commit graph

766,491 commits

Author SHA1 Message Date
Enric Balletbo i Serra
5fb5caee92 pwm-backlight: Enable/disable the PWM before/after LCD enable toggle.
Before this patch the enable signal was set before the PWM signal and
vice-versa on power off. This sequence is wrong, at least, it is on
the different panels datasheets that I checked, so I inverted the sequence
to follow the specs.

For reference the following panels have the mentioned sequence:
  - N133HSE-EA1 (Innolux)
  - N116BGE (Innolux)
  - N156BGE-L21 (Innolux)
  - B101EAN0 (Auo)
  - B101AW03 (Auo)
  - LTN101NT05 (Samsung)
  - CLAA101WA01A (Chunghwa)

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-04-30 10:50:43 +01:00
Andrey Smirnov
dda6fde884 dt-bindings: backlight: Add binding for RAVE SP backlight driver
Add Device Tree bindings for RAVE SP backlight driver - an MFD cell of
parent RAVE SP driver (documented in
Documentation/devicetree/bindings/mfd/zii,rave-sp.txt).

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-04-30 10:50:43 +01:00
Andrey Smirnov
6552d31410 backlight: Add RAVE SP backlight driver
This driver provides access to RAVE SP backlight control
functionality.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-04-30 10:50:43 +01:00
Wolfram Sang
b1437dcb97 i2c: rcar: enhance comment to avoid regressions
Give a clear testcase for people wishing to change this code. It is also
a reminder for me if people ask about it.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-30 11:14:35 +02:00
Tom Callaway
9f99963a43 drm/tinydrm/mi0283qt: Always set rotation value
The PiTFT (ili9340) has a hardware reset circuit that resets only
on power-on and not on each reboot through a gpio like the
rpi-display does. As a result, we need to always apply the
rotation value regardless of the display "on/off" state.
Moved the rotation setting code below out_enable:.

Signed-off-by: Tom Callaway <tcallawa@redhat.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423161639.14420-1-tcallawa@redhat.com
2018-04-30 11:00:19 +02:00
Hans de Goede
596b07a9a2 Bluetooth: btusb: Add Dell XPS 13 9360 to btusb_needs_reset_resume_table
The Dell XPS 13 9360 uses a QCA Rome chip which needs to be reset
(and have its firmware reloaded) for bluetooth to work after
suspend/resume.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514836
Cc: stable@vger.kernel.org
Cc: Garrett LeSage <glesage@redhat.com>
Reported-and-tested-by: Garrett LeSage <glesage@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-04-30 10:56:04 +02:00
Alexei Starovoitov
4d220ed0f8 bpf: remove tracepoints from bpf core
tracepoints to bpf core were added as a way to provide introspection
to bpf programs and maps, but after some time it became clear that
this approach is inadequate, so prog_id, map_id and corresponding
get_next_id, get_fd_by_id, get_info_by_fd, prog_query APIs were
introduced and fully adopted by bpftool and other applications.
The tracepoints in bpf core started to rot and causing syzbot warnings:
WARNING: CPU: 0 PID: 3008 at kernel/trace/trace_event_perf.c:274
Kernel panic - not syncing: panic_on_warn set ...
perf_trace_bpf_map_keyval+0x260/0xbd0 include/trace/events/bpf.h:228
trace_bpf_map_update_elem include/trace/events/bpf.h:274 [inline]
map_update_elem kernel/bpf/syscall.c:597 [inline]
SYSC_bpf kernel/bpf/syscall.c:1478 [inline]
Hence this patch deletes tracepoints in bpf core.

Reported-by: Eric Biggers <ebiggers3@gmail.com>
Reported-by: syzbot <bot+a9dbb3c3e64b62536a4bc5ee7bbd4ca627566188@syzkaller.appspotmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-30 10:55:56 +02:00
Hans de Goede
7781edaed6 i2c: core: ACPI: Log device not acking errors at dbg loglevel
Unfortunately some DSDTs issue bogus i2c reads to non existing devices
resulting in -EREMOTEIO errors because the non existing device of course
does not ack.

This happens e.g. from the The Asus T100TA's _BIX method, the DSDT on
the T100TA defines 2 resources on the I2C1 bus:

        Name (EHID, ResourceTemplate ()
        {
            I2cSerialBusV2 (0x005B, ControllerInitiated, 0x00061A80,
                AddressingMode7Bit, "\\_SB.I2C1",
                0x00, ResourceConsumer, , Exclusive,
                )
        })
        OperationRegion (EHOR, GenericSerialBus, Zero, 0x0100)
        Field (EHOR, BufferAcc, NoLock, Preserve)
        {
            Connection (EHID),
            Offset (0x01),
            AccessAs (BufferAcc, AttribBytes (0x10)),
            ABCD,   8
        }

        Name (UMPC, ResourceTemplate ()
        {
            I2cSerialBusV2 (0x0066, ControllerInitiated, 0x00061A80,
                AddressingMode7Bit, "\\_SB.I2C1",
                0x00, ResourceConsumer, , Exclusive,
                )
        })

The _BIX method does a single read (on each BIX() call) from the EHID
device through the ABCD Field, only to completely ignore the result.
This read always fails as there is no i2c client at address 0x5b.

The _BIX method also does several reads from the UMPC device and actually
uses the results of those to provide battery information.

IIRC I've also seen some DSTDs which do an i2c read to detect if a device
is present, also leading to false positive errors being logged.

Esp. the _BIX use is problematic as the _BIX method gets called
periodically to monitor battery status.

This commit stops the logs from filling up with errors like these:

[   57.327858] i2c i2c-0: i2c read 16 bytes from client@0x5b starting at
               reg 0x1 failed, error: -121

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-30 10:53:31 +02:00
Hans de Goede
c8016fa215 i2c: core: ACPI: Improve OpRegion read errors
When we get an error doing an ACPI SerialBus I2C OpRegion read log some
useful details, like the client address and which register is being
read.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-30 10:53:26 +02:00
Hans de Goede
fc54910280 Bluetooth: btusb: Only check needs_reset_resume DMI table for QCA rome chipsets
Jeremy Cline correctly points out in rhbz#1514836 that a device where the
QCA rome chipset needs the USB_QUIRK_RESET_RESUME quirk, may also ship
with a different wifi/bt chipset in some configurations.

If that is the case then we are needlessly penalizing those other chipsets
with a reset-resume quirk, typically causing 0.4W extra power use because
this disables runtime-pm.

This commit moves the DMI table check to a btusb_check_needs_reset_resume()
helper (so that we can easily also call it for other chipsets) and calls
this new helper only for QCA_ROME chipsets for now.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514836
Cc: stable@vger.kernel.org
Cc: Jeremy Cline <jcline@redhat.com>
Suggested-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-04-30 10:50:45 +02:00
Hans de Goede
544a591668 Revert "Bluetooth: btusb: Fix quirk for Atheros 1525/QCA6174"
Commit f44cb4b19e ("Bluetooth: btusb: Fix quirk for Atheros
1525/QCA6174") is causing bluetooth to no longer work for several
people, see: https://bugzilla.redhat.com/show_bug.cgi?id=1568911

So lets revert it for now and try to find another solution for
devices which need the modified quirk.

Cc: stable@vger.kernel.org
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-04-30 10:49:05 +02:00
William Breathitt Gray
e026646c17 gpio: pcie-idio-24: Fix off-by-one error in get_multiple loop
The PCIe-IDIO-24 features 8 bits of TTL GPIO which may be configured for
output or input. This patch fixes an off-by-one error in the loop
conditional for the get_multiple callback so that the TTL GPIO are
handled.

Fixes: ca37081595 ("gpio: pcie-idio-24: Implement get_multiple/set_multiple callbacks")
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-04-30 10:48:08 +02:00
Wolfram Sang
692099cdcf pwm: simplify getting .drvdata
We should get drvdata from struct device directly. Going via
platform_device is an unneeded step back and forth.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-04-30 10:40:57 +02:00
Michael Shych
27aaa8ad5a i2c: mlxcpld: Add capability register description to documentation
It adds capability register description to documentation.

Signed-off-by: Michael Shych <michaelsh@mellanox.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-30 10:39:29 +02:00
Michael Shych
ae4aa68dd3 i2c: mlxcpld: Allow configurable adapter id for mlxcpld
It allows mlxcpld driver to be connected to pre-defined adapter number
equal or greater than one, in order to avoid current limitation, assuming
usage of id number one only.

Signed-off-by: Michael Shych <michaelsh@mellanox.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-30 10:39:29 +02:00
Michael Shych
845f2a6d00 i2c: mlxcpld: Fix adapter functionality support callback
It fixes report about supported functionality.
Functionality can be different up to CPLD capability.

Fixes: 6bec23bff9 (i2c: mlxcpld: add master driver for mellanox systems)
Signed-off-by: Michael Shych <michaelsh@mellanox.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-30 10:39:28 +02:00
Michael Shych
c9bfdc7c16 i2c: mlxcpld: Add support for smbus block read transaction
It adds support for smbus block read transaction. CPLD smbus block read bit
of capability register is verified during driver initialization, and driver
data is updated if such capability is available. In case an upper layer
requests a read transaction of length one and expects that length will be
the first received byte, driver will notify CPLD about SMBus block read
transaction flavor, so CPLD will know to execute such kind of transaction.

Signed-off-by: Michael Shych <michaelsh@mellanox.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-30 10:39:28 +02:00
Michael Shych
313ce648b5 i2c: mlxcpld: Add support for extended transaction length for i2c-mlxcpld
It adds support for extended length of read and write transactions.
New CPLD logic allows double size of the read and write transactions
length. This feature is verified through capability register, which is
renamed from unclear LPF_REG to CPBLTY_REG. Two bits 5 and 6 of these
register are used for length capability detection, while only 01
combination indicates support of extended transaction length.
Others mean lack of such support.

Signed-off-by: Michael Shych <michaelsh@mellanox.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-30 10:39:28 +02:00
Ryder Lee
6e29577fc2 i2c: mediatek: use of_device_get_match_data()
The usage of of_device_get_match_data() reduce the code size a bit.

Also, the only way to call mtk_i2c_probe() is to match an entry in
mtk_i2c_of_match[], so of_id cannot be NULL.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-30 10:39:28 +02:00
Krzysztof Kozlowski
952cfd1581 i2c: s3c2410: Remove support for Exynos5440
The Exynos5440 is not actively developed, there are no development
boards available and probably there are no real products with it.
Remove wide-tree support for Exynos5440.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-30 10:39:28 +02:00
Jean Delvare
a9c8088c79 i2c: i801: Don't restore config registers on runtime PM
Restoring configuration registers is only needed when we hand control
to the firmware. This is never the case with runtime power
management. The device will autosuspend whenever not used, so avoid
useless register writes by defining suspend/resume only, and not
runtime_suspend/runtime_resume.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-30 10:39:28 +02:00
David Engraf
e8f39e9fc0 i2c: at91: Read all available bytes at once
With FIFO enabled it is possible to read multiple bytes
at once in the interrupt handler as long as RXRDY is
set. This may also reduce the number of interrupts.

This patch polls RXRDY and reads all available bytes at
once.

Signed-off-by: David Engraf <david.engraf@sysgo.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
[wsa: reformatted comment]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-30 10:39:28 +02:00
Pierre-Yves MORDRET
562de4ff4c i2c: i2c-stm32f7: Implement I2C release mechanism
Feature prevents I2C lock-ups. Mechanism resets I2C state machine
and releases SCL/SDA signals but preserves I2C registers.

Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-30 10:39:28 +02:00
Pierre-Yves MORDRET
7ecc8cfde5 i2c: i2c-stm32f7: Add DMA support
This patch adds DMA support for i2c-stm32f7 driver

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-30 10:39:28 +02:00
Pierre-Yves MORDRET
bb8822cbbc i2c: i2c-stm32: Add generic DMA API
This patch adds a generic DMA API to implement DMA support for i2c-stm32fx
drivers

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-30 10:39:27 +02:00
Pierre-Yves MORDRET
9e48155f6b i2c: i2c-stm32f7: Add initial SMBus protocols support
This patch adds SMBus support for I2C controller embedded in STM32F7 Soc.
All SMBus protocols are implemented except SMBus-specific protocols like
SMBus Host Notification and SMBus Alert protocols.

Implemented: SMBus Quick command, Send byte, Receive byte, Write byte/word,
read byte/word, Process call, Block write/read and Block write-block read
process call.

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-30 10:39:27 +02:00
Pierre-Yves MORDRET
60d609f30d i2c: i2c-stm32f7: Add slave support
This patch adds slave support for I2C controller embedded in STM32F7 SoC

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-30 10:39:27 +02:00
Pierre-Yves MORDRET
8c7ecc9953 i2c: i2c-stm32f7: Add 10-bit address support
This patch adds support for 10-bit device address for STM32F7 I2C

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-30 10:39:27 +02:00
Martin Blumenstingl
735596ca8a pwm: meson: Fix allocation of PWM channel array
Using the pwm-meson driver on the 32-bit SoCs causes memory corruption.
The result are some hard-to-explain errors, for example
devm_clk_register() crashes with a NULL dereference somewhere deep in
the common clock framework code. In some cases the kernel even refused
to boot when any of the PWM controllers were enabled on Meson8b.

The root cause is an incorrect memory size in the devm_kcalloc() call in
meson_pwm_probe(). The code allocates an array of meson_pwm_channel
structs, but the size given is the size of the meson_pwm struct (which
seems like a small copy-and-paste error, as meson_pwm is allocated a few
lines above).

Even with this typo the code seemed to work fine on the 64-bit GX SoCs
(maybe due to the structs having the same size in the compiled result,
but I haven't checked this further).

Fixes: 211ed63075 ("pwm: Add support for Meson PWM Controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-04-30 10:32:30 +02:00
Prashanth Prakash
d4f3388afd cpufreq / CPPC: Set platform specific transition_delay_us
Add support to specify platform specific transition_delay_us instead
of using the transition delay derived from PCC.

With commit 3d41386d55 (cpufreq: CPPC: Use transition_delay_us
depending transition_latency) we are setting transition_delay_us
directly and not applying the LATENCY_MULTIPLIER. Because of that,
on Qualcomm Centriq we can end up with a very high rate of frequency
change requests when using the schedutil governor (default
rate_limit_us=10 compared to an earlier value of 10000).

The PCC subspace describes the rate at which the platform can accept
commands on the CPPC's PCC channel. This includes read and write
command on the PCC channel that can be used for reasons other than
frequency transitions. Moreover the same PCC subspace can be used by
multiple freq domains and deriving transition_delay_us from it as we
do now can be sub-optimal.

Moreover if a platform does not use PCC for desired_perf register then
there is no way to compute the transition latency or the delay_us.

CPPC does not have a standard defined mechanism to get the transition
rate or the latency at the moment.

Given the above limitations, it is simpler to have a platform specific
transition_delay_us and rely on PCC derived value only if a platform
specific value is not available.

Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Fixes: 3d41386d55 (cpufreq: CPPC: Use transition_delay_us depending transition_latency)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-30 10:14:08 +02:00
Thierry Reding
273d760060 memory: tegra: Add Tegra210 memory controller hot resets
Define the table of memory controller hot resets for Tegra210.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-04-30 10:12:21 +02:00
Dmitry Osipenko
1b19b0561d memory: tegra: Add Tegra124 memory controller hot resets
Define the table of memory controller hot resets for Tegra124.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-04-30 10:12:21 +02:00
Dmitry Osipenko
3788c4ed4a memory: tegra: Add Tegra114 memory controller hot resets
Define the table of memory controller hot resets for Tegra114.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-04-30 10:12:21 +02:00
Dmitry Osipenko
ec4e1f0d66 memory: tegra: Add Tegra30 memory controller hot resets
Define the table of memory controller hot resets for Tegra30.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-04-30 10:12:21 +02:00
Dmitry Osipenko
cb557757e1 memory: tegra: Add Tegra20 memory controller hot resets
Define the table of memory controller hot resets for Tegra20 and add
specific to Tegra20 hot reset operations.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-04-30 10:12:21 +02:00
Dmitry Osipenko
20e92462cd memory: tegra: Introduce memory client hot reset
In order to reset busy HW properly, memory controller needs to be
involved, otherwise it is possible to get corrupted memory or hang machine
if HW was reset during DMA. Introduce memory client 'hot reset' that will
be used for resetting of busy HW.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-04-30 10:12:21 +02:00
Dmitry Osipenko
a8d502fd33 memory: tegra: Squash tegra20-mc into common tegra-mc driver
Tegra30+ has some minor differences in registers / bits layout compared
to Tegra20. Let's squash Tegra20 driver into the common tegra-mc driver
in a preparation for the upcoming MC hot reset controls implementation,
avoiding code duplication.

Note that this currently doesn't report the value of MC_GART_ERROR_REQ
because it is located within the GART register area and cannot be safely
accessed from the MC driver (this happens to work only by accident). The
proper solution is to integrate the GART driver with the MC driver, much
like is done for the Tegra SMMU, but that is an invasive change and will
be part of a separate patch series.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-04-30 10:10:00 +02:00
Takashi Iwai
76b3421b39 ALSA: aloop: Add missing cable lock to ctl API callbacks
Some control API callbacks in aloop driver are too lazy to take the
loopback->cable_lock and it results in possible races of cable access
while it's being freed.  It eventually lead to a UAF, as reported by
fuzzer recently.

This patch covers such control API callbacks and add the proper mutex
locks.

Reported-by: DaeRyong Jeong <threeearcat@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-30 10:06:48 +02:00
Biju Das
b6ef074bca ARM: dts: iwg23s-sbc: Add EtherAVB support
Define the iW-RainboW-G23S board dependent part of the
EtherAVB device node.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-30 09:59:15 +02:00
Biju Das
f70b0958c0 ARM: dts: r8a77470: Add EtherAVB support
Define the generic R8A77470 part of the EtherAVB device node.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-04-30 09:52:19 +02:00
Ian W MORRISON
b607990c76 drm/i915/glk: Add MODULE_FIRMWARE for Geminilake
As the Geminilake firmware is now merged to linux-firmware.git
use MODUE_FIRMWARE to load the firmware.

This removes the error message in the dmesg log:

    i915 0000:00:02.0: Direct firmware load for
        i915/glk_dmc_ver1_04.bin failed with error -2
    i915 0000:00:02.0: Failed to load DMC firmware
        i915/glk_dmc_ver1_04.bin. Disabling runtime power management.
    i915 0000:00:02.0: DMC firmware homepage:
        https://01.org/linuxgraphics/downloads/firmware

and now shows that the firmware has correctly loaded:

    [drm] Finished loading DMC firmware i915/glk_dmc_ver1_04.bin (v1.4)

Signed-off-by: Ian W MORRISON <ianwmorrison@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180411044213.383-1-ianwmorrison@gmail.com
(cherry picked from commit f6d3e06f07)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-04-30 10:48:37 +03:00
Joel Stanley
5daa8212c0 ARM: dts: aspeed: Describe random number device
There is a random number generator that updates a register in the SCU
every second. This is compatible with the timeriomem rng driver in the
kernel.

From the timeriomem_rng bindings:

  quality: estimated number of bits of true entropy per 1024 bits read
  from the rng.  Defaults to zero which causes the kernel's default
  quality to be used instead.  Note that the default quality is usually
  zero which disables using this rng to automatically fill the kernel's
  entropy pool.

As to the recommended value for us to use:

 Rick Altherr <raltherr@google.com> wrote:
 > Quality is #bit of entropy per 1000 bits read.  100 is a
 > conservative value that was suggested by those in the know.

Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-04-30 14:21:29 +09:30
Yonghong Song
34745aed51 samples/bpf: fix kprobe attachment issue on x64
Commit d5a00528b5 ("syscalls/core, syscalls/x86: Rename
struct pt_regs-based sys_*() to __x64_sys_*()") renamed a lot
of syscall function sys_*() to __x64_sys_*().
This caused several kprobe based samples/bpf tests failing.

This patch fixed the problem in bpf_load.c.
For x86_64 architecture, function name __x64_sys_*() will be
first used for kprobe event creation. If the creation is successful,
it will be used. Otherwise, function name sys_*() will be used
for kprobe event creation.

Fixes: d5a00528b5 ("syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-04-29 20:36:53 -07:00
Florian Fainelli
3ac305c386 net: core: Assert the size of netdev_featres_t
We have about 53 netdev_features_t bits defined and counting, add a
build time check to catch when an u64 type will not be enough and we
will have to convert that to a bitmap. This is done in
register_netdevice() for convenience.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-29 22:50:36 -04:00
Marcelo Ricardo Leitner
2cb5fb1454 MAINTAINERS: add myself as SCTP co-maintainer
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-29 22:49:45 -04:00
Colin Ian King
14b7dc18ee net: systemport: fix spelling mistake: "asymetric" -> "asymmetric"
Trivial fix to spelling mistake in netdev_warn warning message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-29 22:49:03 -04:00
David S. Miller
c1b28847f7 Merge branch 'net-cleanup-skb_tx_hash'
Alexander Duyck says:

====================
Clean up users of skb_tx_hash and __skb_tx_hash

I am in the process of doing some work to try and enable macvlan Tx queue
selection without using ndo_select_queue. As a part of that I will likely
need to make changes to skb_tx_hash. As such this is a clean up or refactor
of the two spots where he function has been used. In both cases it didn't
really seem like the function was being used correctly so I have updated
both code paths to not make use of the function.

My current development environment doesn't have an mlx4 or OPA vnic
available so the changes to those have been build tested only.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-29 22:01:33 -04:00
Alexander Duyck
1b837d489e net: Revoke export for __skb_tx_hash, update it to just be static skb_tx_hash
I am dropping the export of __skb_tx_hash as after my patches nobody is
using it outside of the net/core/dev.c file. In addition I am renaming and
repurposing it to just be a static declaration of skb_tx_hash since that
was the only user for it at this point. By doing this the compiler can
inline it into __netdev_pick_tx as that will improve performance.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-29 22:01:33 -04:00
Alexander Duyck
b86629ebd5 mlx4: Don't bother using skb_tx_hash in mlx4_en_select_queue
The code in the fallback path has supported XDP in conjunction with the Tx
traffic classification for TCs for over a year now. So instead of just
calling skb_tx_hash for every packet we are better off using the fallback
since that will record the Tx queue to the socket and then that can be used
instead of having to recompute the hash every time.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-29 22:01:32 -04:00
Alexander Duyck
d80d8d5573 opa_vnic: Just use skb_get_hash instead of skb_tx_hash
This patch is meant to clean up how the opa_vnic is obtaining entropy from
Tx packets.

The code as it was written was claiming to get 16 bits of hash, but from
what I can tell it was only ever actually getting 14 bits as it was limited
to 0 - (2^15 - 1). It then was folding the result to get a 8 bit value for
entropy.

Instead of throwing away all that input I am cutting out the middle man and
instead having the code call skb_get_hash directly and then folding the 32
bit value into a 8 bit value using a pair of shifts and XOR operations.

Execution wise this new approach should provide more entropy and be faster
since we are bypassing the reciprocal multiplication to reduce the 32b
value to 16b and instead just using a shift/XOR combination.

In addition we can drop the unneeded adapter value from the call to get the
entropy since the netdev itself isn't even needed.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-29 22:01:32 -04:00