The firmware of QCA6174/QCA9377 already support the feature, just enable
it to be able to handle the get_temperature command and process the event.
You can read the temperature by using the hwmon interface,
cat /sys/class/ieee80211/phy*/device/hwmon/hwmon2/temp1_input
Verified with the following hardware and software combination,
QCA6174, only firmware-4.bin doesn't support this, otherwise all support.
QCA9377, all the firmwares upstreamed support this command
Signed-off-by: Ryan Hsu <ryanhsu@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
some userspace programs (e.g. hostapd) need to set the regulatory domain
before selecting the operating channel. Synchronize DFS detector regardless of
the value of ah->curchan, to avoid situations where wireless scan can't be done
on some 5GHz sub-bands, because dfs_region is constantly UNSET.
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
[johannes: fix race with wdev lock/unlock by just acquiring once]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the unlikely case when alloc_irq_table() is not able to return a
remap table then "ret" will be assigned with an error code. Later, the
code checks `index' and if it is negative (which it is because it is
initialized with `-1') and then then function properly aborts but
returns `-1' instead `-ENOMEM' what was intended.
In order to correct this, I assign -ENOMEM to index.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Before commit 0bb6e243d7 ("iommu/amd: Support IOMMU_DOMAIN_DMA type
allocation") amd_iommu_devtable_lock had a read_lock() user but now
there are none. In fact, after the mentioned commit we had only
write_lock() user of the lock. Since there is no reason to keep it as
writer lock, change its type to a spin_lock.
I *think* that we might even be able to remove the lock because all its
current user seem to have their own protection.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The irq_remap_table is allocated while the iommu_table_lock is held with
interrupts disabled.
>From looking at the call sites, all callers are in the early device
initialisation (apic_bsp_setup(), pci_enable_device(),
pci_enable_msi()) so make sense to drop the lock which also enables
interrupts and try to allocate that memory with GFP_KERNEL instead
GFP_ATOMIC.
Since during the allocation the iommu_table_lock is dropped, we need to
recheck if table exists after the lock has been reacquired. I *think*
that it is impossible that the "devid" entry appears in irq_lookup_table
while the lock is dropped since the same device can only be probed once.
However I check for both cases, just to be sure.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Setting the IRQ remap table for a specific devid (or its alias devid)
includes three steps. Those three steps are always repeated each time
this is done.
Introduce a new helper function, move those steps there and use that
function instead. The compiler can still decide if it is worth to
inline.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The variable of type struct irq_remap_table is always named `table'
except in amd_iommu_update_ga() where it is called `irt'. Make it
consistent and name it also `table'.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
alloc_irq_table() has a special ioapic argument. If set then it will
pre-allocate / reserve the first 32 indexes. The argument is only once
true and it would make alloc_irq_table() a little simpler if we would
extract the special bits to the caller.
The caller of irq_remapping_alloc() is holding irq_domain_mutex so the
initialization of iommu->irte_ops->set_allocated() should not race
against other user.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The function get_irq_table() reads/writes irq_lookup_table while holding
the amd_iommu_devtable_lock. It also modifies
amd_iommu_dev_table[].data[2].
set_dte_entry() is using amd_iommu_dev_table[].data[0|1] (under the
domain->lock) so it should be okay. The access to the iommu is
serialized with its own (iommu's) lock.
So split out get_irq_table() out of amd_iommu_devtable_lock's lock.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
domain_id_alloc() and domain_id_free() is used for id management. Those
two function share a bitmap (amd_iommu_pd_alloc_bitmap) and set/clear
bits based on id allocation. There is no need to share this with
amd_iommu_devtable_lock, it can use its own lock for this operation.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
alloc_dev_data() adds new items to dev_data_list and search_dev_data()
is searching for items in this list. Both protect the access to the list
with a spinlock.
There is no need to navigate forth and back within the list and there is
also no deleting of a specific item. This qualifies the list to become a
lock less list and as part of this, the spinlock can be removed.
With this change the ordering of those items within the list is changed:
before the change new items were added to the end of the list, now they
are added to the front. I don't think it matters but wanted to mention
it.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
find_dev_data() does not check whether the return value alloc_dev_data()
is NULL. This was okay once because the pointer was returned once as-is.
Since commit df3f7a6e8e ("iommu/amd: Use is_attach_deferred
call-back") the pointer may be used within find_dev_data() so a NULL
check is required.
Cc: Baoquan He <bhe@redhat.com>
Fixes: df3f7a6e8e ("iommu/amd: Use is_attach_deferred call-back")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
[johannes: fix race with wdev lock/unlock by just acquiring once]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Fix a UBSAN warning;
* Improvement in the net-stack/driver log syncing
* An RCU lock fix in the new rate-scaling code;
* Support for new PCI IDs for the 9000 family;
* Support for a new API version;
* Initial work for supporting the new ETSI rules;
* Support for advanced dwell in scanning;
* Support for OCE in scanning;
* Some debugging improvements;
* Other small improvements and cleanups here and there.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEF3LNfgb2BPWm68smoUecoho8xfoFAlq7844ACgkQoUecoho8
xfrA4w/+Id8GUA7RpsH3rkdWYJbru9j4XzANGVgDqo1G52nuczAjWuT5Apdtb9Dc
ULwYpo8O9H4xLc3plF7RQ/NuqH5gLB+XpKFUbo6pN6tKOYXo6lyvAVjE9N6fhaxT
pbd2ZFyC7M6NAhyPIAC5n0MiLBQw57Y0Qiou/woowF/GGttP++XFLsCjU8h4bKui
NTenIfs8ht0t0KFw56JEiyMeUS8HcLa6fcnkTFkIZbyho5MlMJP8Yxnc0E7mwwOf
BWpwlRBCSJUghzW3MiWeSkU1+23IPbFFRdSRY3Suk0u1lFfWuIAKM0iqpg/BKeU9
EVrvFLQ+P8KjnfDV9zxTFL24oxw1YJ/Myss5nIAOFzKopco7FNdGbkW7HD2XVwVz
vjs5j57496lkC/Cb55zXbNLjrp1gL+16RlOcpKNmcS5khmv0NrKBj5RRkZQ8XOXD
TWBOcev89R58E6XnUijiEN96zZ7Ufdb56m3Xm/uvses/aoNFK5+QspMdPTeuI+VA
Pw+APOiTSWHW29Ndn93MNLlJoo02v/o/qWbPUkTN9iASyHowYuKqiC18o3vx8I/6
DFh86k1wNchgxlo8MbHrM2ginr/+LtQke+FsjczCRIRUH8ySFHthZtItr2Bl/kky
JQwC/R7AQT8iZWphA8aEQnXOaOuxwMve0QpKxHwAI4FUFHReUU0=
=8m6c
-----END PGP SIGNATURE-----
Merge tag 'iwlwifi-next-for-kalle-2018-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
iwlwifi patches for 4.14
* Fix a UBSAN warning;
* Improvement in the net-stack/driver log syncing
* An RCU lock fix in the new rate-scaling code;
* Support for new PCI IDs for the 9000 family;
* Support for a new API version;
* Initial work for supporting the new ETSI rules;
* Support for advanced dwell in scanning;
* Support for OCE in scanning;
* Some debugging improvements;
* Other small improvements and cleanups here and there.
Currently autodisconnect_wk assumes that only interface types of
P2P_CLIENT and STATION use conn_owner_nlportid. Change this so all
interface types are supported.
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently channel switch/start_ap to DFS channel cannot be done to
non-CAC-cleared channel even if DFS offload if enabled.
Make non-cleared DFS channels available if DFS offload is enabled.
CAC will be started by HW after channel change, start_ap call, etc.
Signed-off-by: Dmitry Lebed <dlebed@quantenna.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Exclude CAC_STARTED event from !wdev->cac_started check,
since cac_started will be set later in the same function.
Signed-off-by: Dmitry Lebed <dlebed@quantenna.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Bandwidth change value reported via nl80211 contains mac80211
specific enum value(ieee80211_sta_rx_bw) and which is not
understand by userspace application. Map the mac80211 specific
value to nl80211_chan_width enum value to avoid using wrong value
in the userspace application. And used station's ht/vht capability
to map IEEE80211_STA_RX_BW_20 and IEEE80211_STA_RX_BW_160 with
proper nl80211 value.
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
SMPS_MODE change value notified via nl80211 contains mac80211
specific value(ieee80211_smps_mode) and user space application
will not know those values. This patch add support to map
the mac80211 enum value to nl80211_smps_mode which will be
understood by the userspace application.
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently bw and smps_mode are u8 type value in sta_opmode_info
structure. This values filled in mac80211 from ieee80211_sta_rx_bandwidth
and ieee80211_smps_mode. These enum values are specific to mac80211 and
userspace/cfg80211 doesn't know about that. This will lead to incorrect
result/assumption by the user space application.
Change bw and smps_mode parameters to their respective enums in nl80211.
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This adds support for the Physik Instrumente E-870 PIShift Drive
Electronics, a Piezo motor driver.
Signed-off-by: Martin Teichmann <martin.teichmann@xfel.eu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
platform_driver_register() takes care of assigning driver->bus
to &platform_bus_type, no need to explicitly assign it in the driver.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
The core clock field was badly named ->ecc_clk which might lead to some
confusion. Rename it ->core_clk.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Prepare the migration of the lpc32xx_slc driver to use nand_scan() by
cleaning the error path in the probe function.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
An error after nand_scan_tail() should trigger a nand_cleanup().
The helper mtd_device_parse_register() returns an error code that should
be checked and nand_cleanup() called accordingly.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
An error after nand_scan_tail() should trigger a nand_cleanup().
The helper mtd_device_parse_register() returns an error code that should
be checked and nand_cleanup() called accordingly.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
An error after nand_scan_tail() should trigger a nand_cleanup().
The helper mtd_device_parse_register() returns an error code that should
be checked and nand_cleanup() called accordingly.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
An error after nand_scan_tail() should trigger a nand_cleanup().
The helper mtd_device_parse_register() returns an error code that should
be checked and nand_cleanup() called accordingly.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
An error after nand_scan_tail() should trigger a nand_cleanup().
The helper mtd_device_register() returns an error code that should
be checked and nand_cleanup() called accordingly.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
An error after nand_scan_tail() should trigger a nand_cleanup().
The helper mtd_device_register() returns an error code that should
be checked and nand_cleanup() called accordingly.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
An error after nand_scan_tail() should trigger a nand_cleanup().
The helper mtd_device_parse_register() returns an error code that should
be checked and nand_cleanup() called accordingly.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
An error after nand_scan_tail() should trigger a nand_cleanup().
The helper mtd_device_register() returns an error code that should
be checked and nand_cleanup() called accordingly.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
This mode is not used by any existing setup and should not be used
because it overwrites the BBMs. Let's just remove it before someone
starts using it.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
On Armada 7K/8K we need to explicitly enable the register clock. This
clock is optional because not all the SoCs using this IP need it but at
least for Armada 7K/8K it is actually mandatory.
The binding documentation is updated accordingly.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
The kernel.h macro DIV_ROUND_UP performs the computation
(((n) + (d) - 1) / (d)) but is perhaps more readable.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
In mtdcore.c, some function descriptions do not match function
definitions. Just fix these mismatches.
Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
It is not necessary for all device's maps to be CFI_HOST_ENDIAN.
Maps device can be Big endian or little endian.
Currently it is being taken care using CONFIG_MTD_CFI_LE_BYTE_SWAP or
CONFIG_MTD_CFI_BE_BYTE_SWAP i.e. compile time.
Now update struct map_info's swap field based on device characteristics
defined in device tree.
Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Provide a way to specify the endianness to use when accessing a
memory-mapped flash.
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
In the commit 2c77c57d22 ("mtd: move code adding master MTD out of
mtd_add_device_partitions()") behavior of mtd_device_parse_register()
has very slightly changed. It's a pretty non-significant order change
to match updated function behavior.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
remove myself as MTD and SPI NOR maintainer.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
This adds the JEDEC IDs for Eon EN29LV400A variants
EN29LV400AB and EN29LV400AT. This chip is found in the
D-Link DNS-313.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
- Be consistent when checking if a perf_mmap instance had
its ring buffer unmmaped, fixing segfaults noticed in
'perf trace' (Kan Liang, Arnaldo Carvalho de Melo)
- Avoid adding the same option multiple times to the 'diff'
command in check-headers.sh (Jiri Olsa)
- Add vendor event files (JSON format) to various IBM
s390 models (z10EC, z10BC, z196, zEC12, zBC12, z13
and z14) (Thomas Richter)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----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=iMgs
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.17-20180328' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
- Be consistent when checking if a perf_mmap instance had
its ring buffer unmmaped, fixing segfaults noticed in
'perf trace' (Kan Liang, Arnaldo Carvalho de Melo)
- Avoid adding the same option multiple times to the 'diff'
command in check-headers.sh (Jiri Olsa)
- Add vendor event files (JSON format) to various IBM
s390 models (z10EC, z10BC, z196, zEC12, zBC12, z13
and z14) (Thomas Richter)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since commit 8253bb3f82 ("regmap: potentially duplicate the name
string stored in regmap"), the name field of struct regmap_config
is copied in __regmap_init(), so we no longer need to worry about
keeping our own copy of the name.
Just use a string literal in the initialization of da8xx_cfgchip_config
instead of creating a separate variable for the name.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This fixes a possible kernel oops due to using stack allocated platform
data for the USB PHY driver on DA8XX devices. If the platform device
probe is deferred, then we get a corrupt pointer for the platform data.
We now use a global static struct for the platform data so that the
platform data pointer does not get written over.
Fixes: bdec5a6b57 ("ARM: da8xx: use platform data for CFGCHIP syscon regmap")
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Since the rdma_port_space enum is being passed between user and kernel for
user cm_id setup, we need it in a UAPI header. So add it to
rdma_user_cm.h.
This also fixes the cm_id restrack changes which pass up the port space
value via the RDMA_NLDEV_ATTR_RES_PS attribute.
Fixes: 00313983cd ("RDMA/nldev: provide detailed CM_ID information")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>