Allow specifying __arg_untrusted for void */char */int */long *
parameters. Treat such parameters as
PTR_TO_MEM|MEM_RDONLY|PTR_UNTRUSTED of size zero.
Intended usage is as follows:
int memcmp(char *a __arg_untrusted, char *b __arg_untrusted, size_t n) {
bpf_for(i, 0, n) {
if (a[i] - b[i]) // load at any offset is allowed
return a[i] - b[i];
}
return 0;
}
Allocate register id for ARG_PTR_TO_MEM parameters only when
PTR_MAYBE_NULL is set. Register id for PTR_TO_MEM is used only to
propagate non-null status after conditionals.
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250704230354.1323244-8-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a 'struct bpf_scc_callchain callchain_buf' field in bpf_verifier_env.
This way, the previous bpf_scc_callchain local variables can be
replaced by taking address of env->callchain_buf. This can reduce stack
usage and fix the following error:
kernel/bpf/verifier.c:19921:12: error: stack frame size (1368) exceeds limit (1280) in 'do_check'
[-Werror,-Wframe-larger-than]
Reported-by: Arnd Bergmann <arnd@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250703141117.1485108-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce a kernel function which is the analogue of dump_stack()
printing some useful information and the stack trace. This is not
exposed to BPF programs yet, but can be made available in the future.
When we have a program counter for a BPF program in the stack trace,
also additionally output the filename and line number to make the trace
helpful. The rest of the trace can be passed into ./decode_stacktrace.sh
to obtain the line numbers for kernel symbols.
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250703204818.925464-7-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In preparation of figuring out the closest program that led to the
current point in the kernel, implement a function that scans through the
stack trace and finds out the closest BPF program when walking down the
stack trace.
Special care needs to be taken to skip over kernel and BPF subprog
frames. We basically scan until we find a BPF main prog frame. The
assumption is that if a program calls into us transitively, we'll
hit it along the way. If not, we end up returning NULL.
Contextually the function will be used in places where we know the
program may have called into us.
Due to reliance on arch_bpf_stack_walk(), this function only works on
x86 with CONFIG_UNWINDER_ORC, arm64, and s390. Remove the warning from
arch_bpf_stack_walk as well since we call it outside bpf_throw()
context.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250703204818.925464-6-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Prepare a function for use in future patches that can extract the file
info, line info, and the source line number for a given BPF program
provided it's program counter.
Only the basename of the file path is provided, given it can be
excessively long in some cases.
This will be used in later patches to print source info to the BPF
stream.
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250703204818.925464-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add support for a stream API to the kernel and expose related kfuncs to
BPF programs. Two streams are exposed, BPF_STDOUT and BPF_STDERR. These
can be used for printing messages that can be consumed from user space,
thus it's similar in spirit to existing trace_pipe interface.
The kernel will use the BPF_STDERR stream to notify the program of any
errors encountered at runtime. BPF programs themselves may use both
streams for writing debug messages. BPF library-like code may use
BPF_STDERR to print warnings or errors on misuse at runtime.
The implementation of a stream is as follows. Everytime a message is
emitted from the kernel (directly, or through a BPF program), a record
is allocated by bump allocating from per-cpu region backed by a page
obtained using alloc_pages_nolock(). This ensures that we can allocate
memory from any context. The eventual plan is to discard this scheme in
favor of Alexei's kmalloc_nolock() [0].
This record is then locklessly inserted into a list (llist_add()) so
that the printing side doesn't require holding any locks, and works in
any context. Each stream has a maximum capacity of 4MB of text, and each
printed message is accounted against this limit.
Messages from a program are emitted using the bpf_stream_vprintk kfunc,
which takes a stream_id argument in addition to working otherwise
similar to bpf_trace_vprintk.
The bprintf buffer helpers are extracted out to be reused for printing
the string into them before copying it into the stream, so that we can
(with the defined max limit) format a string and know its true length
before performing allocations of the stream element.
For consuming elements from a stream, we expose a bpf(2) syscall command
named BPF_PROG_STREAM_READ_BY_FD, which allows reading data from the
stream of a given prog_fd into a user space buffer. The main logic is
implemented in bpf_stream_read(). The log messages are queued in
bpf_stream::log by the bpf_stream_vprintk kfunc, and then pulled and
ordered correctly in the stream backlog.
For this purpose, we hold a lock around bpf_stream_backlog_peek(), as
llist_del_first() (if we maintained a second lockless list for the
backlog) wouldn't be safe from multiple threads anyway. Then, if we
fail to find something in the backlog log, we splice out everything from
the lockless log, and place it in the backlog log, and then return the
head of the backlog. Once the full length of the element is consumed, we
will pop it and free it.
The lockless list bpf_stream::log is a LIFO stack. Elements obtained
using a llist_del_all() operation are in LIFO order, thus would break
the chronological ordering if printed directly. Hence, this batch of
messages is first reversed. Then, it is stashed into a separate list in
the stream, i.e. the backlog_log. The head of this list is the actual
message that should always be returned to the caller. All of this is
done in bpf_stream_backlog_fill().
From the kernel side, the writing into the stream will be a bit more
involved than the typical printk. First, the kernel typically may print
a collection of messages into the stream, and parallel writers into the
stream may suffer from interleaving of messages. To ensure each group of
messages is visible atomically, we can lift the advantage of using a
lockless list for pushing in messages.
To enable this, we add a bpf_stream_stage() macro, and require kernel
users to use bpf_stream_printk statements for the passed expression to
write into the stream. Underneath the macro, we have a message staging
API, where a bpf_stream_stage object on the stack accumulates the
messages being printed into a local llist_head, and then a commit
operation splices the whole batch into the stream's lockless log list.
This is especially pertinent for rqspinlock deadlock messages printed to
program streams. After this change, we see each deadlock invocation as a
non-interleaving contiguous message without any confusion on the
reader's part, improving their user experience in debugging the fault.
While programs cannot benefit from this staged stream writing API, they
could just as well hold an rqspinlock around their print statements to
serialize messages, hence this is kept kernel-internal for now.
Overall, this infrastructure provides NMI-safe any context printing of
messages to two dedicated streams.
Later patches will add support for printing splats in case of BPF arena
page faults, rqspinlock deadlocks, and cond_break timeouts, and
integration of this facility into bpftool for dumping messages to user
space.
[0]: https://lore.kernel.org/bpf/20250501032718.65476-1-alexei.starovoitov@gmail.com
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250703204818.925464-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Refactor code to be able to get and put bprintf buffers and use
bpf_printf_prepare independently. This will be used in the next patch to
implement BPF streams support, particularly as a staging buffer for
strings that need to be formatted and then allocated and pushed into a
stream.
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250703204818.925464-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei suggested, 'link_type' can be more precise and differentiate
for human in fdinfo. In fact BPF_LINK_TYPE_KPROBE_MULTI includes
kretprobe_multi type, the same as BPF_LINK_TYPE_UPROBE_MULTI, so we
can show it more concretely.
link_type: kprobe_multi
link_id: 1
prog_tag: d2b307e915f0dd37
...
link_type: kretprobe_multi
link_id: 2
prog_tag: ab9ea0545870781d
...
link_type: uprobe_multi
link_id: 9
prog_tag: e729f789e34a8eca
...
link_type: uretprobe_multi
link_id: 10
prog_tag: 7db356c03e61a4d4
Co-developed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Link: https://lore.kernel.org/r/20250702153958.639852-1-chen.dylane@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cross-merge BPF, perf and other fixes after downstream PRs.
It restores BPF CI to green after critical fix
commit bc4394e5e7 ("perf: Fix the throttle error of some clock events")
No conflicts.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCaFx0bQAKCRBZ7Krx/gZQ
63yTAQC4NS7qopT8BQGn3aM+t8YjYo36BTeSRcSy4hVEAFrEJAD/WyW5Dcy1lWZR
S8g8rqRimsCepwxqTinYJlS7H8S56ws=
=CmGc
-----END PGP SIGNATURE-----
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull mount fixes from Al Viro:
"Several mount-related fixes"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
userns and mnt_idmap leak in open_tree_attr(2)
attach_recursive_mnt(): do not lock the covering tree when sliding something under it
replace collect_mounts()/drop_collected_mounts() with a safer variant
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen, if used, replaces special
chars in names) but it gives more uniform naming in Python.
Fixes: bc8aeb2045 ("Documentation: netlink: add a YAML spec for mptcp")
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250624211002.3475021-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add range tracking for instruction BPF_NEG. Without this logic, a trivial
program like the following will fail
volatile bool found_value_b;
SEC("lsm.s/socket_connect")
int BPF_PROG(test_socket_connect)
{
if (!found_value_b)
return -1;
return 0;
}
with verifier log:
"At program exit the register R0 has smin=0 smax=4294967295 should have
been in [-4095, 0]".
This is because range information is lost in BPF_NEG:
0: R1=ctx() R10=fp0
; if (!found_value_b) @ xxxx.c:24
0: (18) r1 = 0xffa00000011e7048 ; R1_w=map_value(...)
2: (71) r0 = *(u8 *)(r1 +0) ; R0_w=scalar(smin32=0,smax=255)
3: (a4) w0 ^= 1 ; R0_w=scalar(smin32=0,smax=255)
4: (84) w0 = -w0 ; R0_w=scalar(range info lost)
Note that, the log above is manually modified to highlight relevant bits.
Fix this by maintaining proper range information with BPF_NEG, so that
the verifier will know:
4: (84) w0 = -w0 ; R0_w=scalar(smin32=-255,smax=0)
Also updated selftests based on the expected behavior.
Signed-off-by: Song Liu <song@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250625164025.3310203-2-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If a userspace application just include <linux/vm_sockets.h> will fail
to build with the following errors:
/usr/include/linux/vm_sockets.h:182:39: error: invalid application of ‘sizeof’ to incomplete type ‘struct sockaddr’
182 | unsigned char svm_zero[sizeof(struct sockaddr) -
| ^~~~~~
/usr/include/linux/vm_sockets.h:183:39: error: ‘sa_family_t’ undeclared here (not in a function)
183 | sizeof(sa_family_t) -
|
Include <sys/socket.h> for userspace (guarded by ifndef __KERNEL__)
where `struct sockaddr` and `sa_family_t` are defined.
We already do something similar in <linux/mptcp.h> and <linux/if.h>.
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Reported-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250623100053.40979-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
collect_mounts() has several problems - one can't iterate over the results
directly, so it has to be done with callback passed to iterate_mounts();
it has an oopsable race with d_invalidate(); it creates temporary clones
of mounts invisibly for sync umount (IOW, you can have non-lazy umount
succeed leaving filesystem not mounted anywhere and yet still busy).
A saner approach is to give caller an array of struct path that would pin
every mount in a subtree, without cloning any mounts.
* collect_mounts()/drop_collected_mounts()/iterate_mounts() is gone
* collect_paths(where, preallocated, size) gives either ERR_PTR(-E...) or
a pointer to array of struct path, one for each chunk of tree visible under
'where' (i.e. the first element is a copy of where, followed by (mount,root)
for everything mounted under it - the same set collect_mounts() would give).
Unlike collect_mounts(), the mounts are *not* cloned - we just get pinning
references to the roots of subtrees in the caller's namespace.
Array is terminated by {NULL, NULL} struct path. If it fits into
preallocated array (on-stack, normally), that's where it goes; otherwise
it's allocated by kmalloc_array(). Passing 0 as size means that 'preallocated'
is ignored (and expected to be NULL).
* drop_collected_paths(paths, preallocated) is given the array returned
by an earlier call of collect_paths() and the preallocated array passed to that
call. All mount/dentry references are dropped and array is kfree'd if it's not
equal to 'preallocated'.
* instead of iterate_mounts(), users should just iterate over array
of struct path - nothing exotic is needed for that. Existing users (all in
audit_tree.c) are converted.
[folded a fix for braino reported by Venkat Rao Bagalkote <venkat88@linux.ibm.com>]
Fixes: 80b5dce8c5 ("vfs: Add a function to lazily unmount all mounts from any dentry")
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
syzbot reported use-after-free in vhci_flush() without repro. [0]
From the splat, a thread close()d a vhci file descriptor while
its device was being used by iotcl() on another thread.
Once the last fd refcnt is released, vhci_release() calls
hci_unregister_dev(), hci_free_dev(), and kfree() for struct
vhci_data, which is set to hci_dev->dev->driver_data.
The problem is that there is no synchronisation after unlinking
hdev from hci_dev_list in hci_unregister_dev(). There might be
another thread still accessing the hdev which was fetched before
the unlink operation.
We can use SRCU for such synchronisation.
Let's run hci_dev_reset() under SRCU and wait for its completion
in hci_unregister_dev().
Another option would be to restore hci_dev->destruct(), which was
removed in commit 587ae086f6 ("Bluetooth: Remove unused
hci-destruct cb"). However, this would not be a good solution, as
we should not run hci_unregister_dev() while there are in-flight
ioctl() requests, which could lead to another data-race KCSAN splat.
Note that other drivers seem to have the same problem, for exmaple,
virtbt_remove().
[0]:
BUG: KASAN: slab-use-after-free in skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline]
BUG: KASAN: slab-use-after-free in skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937
Read of size 8 at addr ffff88807cb8d858 by task syz.1.219/6718
CPU: 1 UID: 0 PID: 6718 Comm: syz.1.219 Not tainted 6.16.0-rc1-syzkaller-00196-g08207f42d3ff #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xd2/0x2b0 mm/kasan/report.c:521
kasan_report+0x118/0x150 mm/kasan/report.c:634
skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline]
skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937
skb_queue_purge include/linux/skbuff.h:3368 [inline]
vhci_flush+0x44/0x50 drivers/bluetooth/hci_vhci.c:69
hci_dev_do_reset net/bluetooth/hci_core.c:552 [inline]
hci_dev_reset+0x420/0x5c0 net/bluetooth/hci_core.c:592
sock_do_ioctl+0xd9/0x300 net/socket.c:1190
sock_ioctl+0x576/0x790 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fcf5b98e929
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fcf5c7b9038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fcf5bbb6160 RCX: 00007fcf5b98e929
RDX: 0000000000000000 RSI: 00000000400448cb RDI: 0000000000000009
RBP: 00007fcf5ba10b39 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007fcf5bbb6160 R15: 00007ffd6353d528
</TASK>
Allocated by task 6535:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4359
kmalloc_noprof include/linux/slab.h:905 [inline]
kzalloc_noprof include/linux/slab.h:1039 [inline]
vhci_open+0x57/0x360 drivers/bluetooth/hci_vhci.c:635
misc_open+0x2bc/0x330 drivers/char/misc.c:161
chrdev_open+0x4c9/0x5e0 fs/char_dev.c:414
do_dentry_open+0xdf0/0x1970 fs/open.c:964
vfs_open+0x3b/0x340 fs/open.c:1094
do_open fs/namei.c:3887 [inline]
path_openat+0x2ee5/0x3830 fs/namei.c:4046
do_filp_open+0x1fa/0x410 fs/namei.c:4073
do_sys_openat2+0x121/0x1c0 fs/open.c:1437
do_sys_open fs/open.c:1452 [inline]
__do_sys_openat fs/open.c:1468 [inline]
__se_sys_openat fs/open.c:1463 [inline]
__x64_sys_openat+0x138/0x170 fs/open.c:1463
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 6535:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x62/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2381 [inline]
slab_free mm/slub.c:4643 [inline]
kfree+0x18e/0x440 mm/slub.c:4842
vhci_release+0xbc/0xd0 drivers/bluetooth/hci_vhci.c:671
__fput+0x44c/0xa70 fs/file_table.c:465
task_work_run+0x1d1/0x260 kernel/task_work.c:227
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0x6ad/0x22e0 kernel/exit.c:955
do_group_exit+0x21c/0x2d0 kernel/exit.c:1104
__do_sys_exit_group kernel/exit.c:1115 [inline]
__se_sys_exit_group kernel/exit.c:1113 [inline]
__x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1113
x64_sys_call+0x21ba/0x21c0 arch/x86/include/generated/asm/syscalls_64.h:232
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The buggy address belongs to the object at ffff88807cb8d800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 88 bytes inside of
freed 1024-byte region [ffff88807cb8d800, ffff88807cb8dc00)
Fixes: bf18c7118c ("Bluetooth: vhci: Free driver_data on file release")
Reported-by: syzbot+2faa4825e556199361f9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f62d64848fc4c7c30cd6
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
alternatives-patched doesn't get mishandled by out-of-order modifications,
leading to it overflowing and causing page faults when patching
- Avoid an infinite loop when early code does a ranged TLB invalidation before
the broadcast TLB invalidation count of how many pages it can flush, has
been read from CPUID
- Fix a CONFIG_MODULES typo
- Disable broadcast TLB invalidation when PTI is enabled to avoid an overflow
of the bitmap tracking dynamic ASIDs which need to be flushed when the
kernel switches between the user and kernel address space
- Handle the case of a CPU going offline and thus reporting zeroes when
reading top-level events in the resctrl code
-----BEGIN PGP SIGNATURE-----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=NT0q
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.16_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Make sure the array tracking which kernel text positions need to be
alternatives-patched doesn't get mishandled by out-of-order
modifications, leading to it overflowing and causing page faults when
patching
- Avoid an infinite loop when early code does a ranged TLB invalidation
before the broadcast TLB invalidation count of how many pages it can
flush, has been read from CPUID
- Fix a CONFIG_MODULES typo
- Disable broadcast TLB invalidation when PTI is enabled to avoid an
overflow of the bitmap tracking dynamic ASIDs which need to be
flushed when the kernel switches between the user and kernel address
space
- Handle the case of a CPU going offline and thus reporting zeroes when
reading top-level events in the resctrl code
* tag 'x86_urgent_for_v6.16_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives: Fix int3 handling failure from broken text_poke array
x86/mm: Fix early boot use of INVPLGB
x86/its: Fix an ifdef typo in its_alloc()
x86/mm: Disable INVLPGB when PTI is enabled
x86,fs/resctrl: Remove inappropriate references to cacheinfo in the resctrl subsystem
same hw events features
- Avoid a deadlock when throttling events
- Document the perf event states more
- Make sure a number of perf paths switching off or rescheduling events call
perf_cgroup_event_disable()
- Make sure perf does task sampling before its userspace mapping is torn down,
and not after
-----BEGIN PGP SIGNATURE-----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=nnMl
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.16_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Avoid a crash on a heterogeneous machine where not all cores support
the same hw events features
- Avoid a deadlock when throttling events
- Document the perf event states more
- Make sure a number of perf paths switching off or rescheduling events
call perf_cgroup_event_disable()
- Make sure perf does task sampling before its userspace mapping is
torn down, and not after
* tag 'perf_urgent_for_v6.16_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix crash in icl_update_topdown_event()
perf: Fix the throttle error of some clock events
perf: Add comment to enum perf_event_state
perf/core: Fix WARN in perf_cgroup_switch()
perf: Fix dangling cgroup pointer in cpuctx
perf: Fix cgroup state vs ERROR
perf: Fix sample vs do_exit()
- Fix another set of FP/SIMD/SVE bugs affecting NV, and plugging some
missing synchronisation
- A small fix for the irqbypass hook fixes, tightening the check and
ensuring that we only deal with MSI for both the old and the new
route entry
- Rework the way the shadow LRs are addressed in a nesting
configuration, plugging an embarrassing bug as well as simplifying
the whole process
- Add yet another fix for the dreaded arch_timer_edge_cases selftest
RISC-V:
- Fix the size parameter check in SBI SFENCE calls
- Don't treat SBI HFENCE calls as NOPs
x86 TDX:
- Complete API for handling complex TDVMCALLs in userspace. This was
delayed because the spec lacked a way for userspace to deny supporting
these calls; the new exit code is now approved.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmhXq3YUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM6JAf/YG2NrLK22eZuNILBu6lwf4+yrUfU
vKcQLHjyX477xRIDZOiAqFOw6JVfqUj7gHbPM+wiVIAg3JT931TkeaZQFuOnMg+k
HalkddeSa9oupd9nhmogcRfGovOXmBQFOleJ+h3GcSeMT/w+6JtgXmgC6/l29f3X
xswi9Lb6yRbcnd2E8XOnJ+ZBqA3ABguuM+0vcmN2xH6EIBaRzjuDPPHV3NGf2aBK
BTAylYzU5P4tZYEHiH/9WlCM19gaeIb2A1LSPDNASpUufvw4VIpmU9MwLDa5LtNB
kVIQxotgFHEoO9qnTX8sGsBrNuStHOuzZA17Z8O6OzTYISK5a7CdworR1w==
=upFj
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix another set of FP/SIMD/SVE bugs affecting NV, and plugging some
missing synchronisation
- A small fix for the irqbypass hook fixes, tightening the check and
ensuring that we only deal with MSI for both the old and the new
route entry
- Rework the way the shadow LRs are addressed in a nesting
configuration, plugging an embarrassing bug as well as simplifying
the whole process
- Add yet another fix for the dreaded arch_timer_edge_cases selftest
RISC-V:
- Fix the size parameter check in SBI SFENCE calls
- Don't treat SBI HFENCE calls as NOPs
x86 TDX:
- Complete API for handling complex TDVMCALLs in userspace.
This was delayed because the spec lacked a way for userspace to
deny supporting these calls; the new exit code is now approved"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: TDX: Exit to userspace for GetTdVmCallInfo
KVM: TDX: Handle TDG.VP.VMCALL<GetQuote>
KVM: TDX: Add new TDVMCALL status code for unsupported subfuncs
KVM: arm64: VHE: Centralize ISBs when returning to host
KVM: arm64: Remove cpacr_clear_set()
KVM: arm64: Remove ad-hoc CPTR manipulation from kvm_hyp_handle_fpsimd()
KVM: arm64: Remove ad-hoc CPTR manipulation from fpsimd_sve_sync()
KVM: arm64: Reorganise CPTR trap manipulation
KVM: arm64: VHE: Synchronize CPTR trap deactivation
KVM: arm64: VHE: Synchronize restore of host debug registers
KVM: arm64: selftests: Close the GIC FD in arch_timer_edge_cases
KVM: arm64: Explicitly treat routing entry type changes as changes
KVM: arm64: nv: Fix tracking of shadow list registers
RISC-V: KVM: Don't treat SBI HFENCE calls as NOPs
RISC-V: KVM: Fix the size parameter check in SBI SFENCE calls
- Fix some file descriptor leaks that stand out with recent changes to
'perf list'.
- Fix prctl include to fix building 'perf bench futex' hash with musl libc.
- Restrict 'perf test' uniquifying entry to machines with 'uncore_imc' PMUs.
- Document new output fields (op, cache, mem, dtlb, snoop) used with
'perf mem'.
- Synchronize kernel header copies.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCaFWAEwAKCRCyPKLppCJ+
J0/LAP46WdlK1T49um790QowJR+HqRQEngur6ZIb8ya0FpCc4AEAnv8KdGdeoF21
H403o3fbCaMGN5ZQ4loe3IEO9gh6EAY=
=9GzE
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.16-1-2025-06-20' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix some file descriptor leaks that stand out with recent changes to
'perf list'
- Fix prctl include to fix building 'perf bench futex' hash with musl
libc
- Restrict 'perf test' uniquifying entry to machines with 'uncore_imc'
PMUs
- Document new output fields (op, cache, mem, dtlb, snoop) used with
'perf mem'
- Synchronize kernel header copies
* tag 'perf-tools-fixes-for-v6.16-1-2025-06-20' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
tools headers x86 cpufeatures: Sync with the kernel sources
perf bench futex: Fix prctl include in musl libc
perf test: Directory file descriptor leak
perf evsel: Missed close() when probing hybrid core PMUs
tools headers: Synchronize linux/bits.h with the kernel sources
tools arch amd ibs: Sync ibs.h with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers: Syncronize linux/build_bug.h with the kernel sources
tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench'
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Sync the drm/drm.h with the kernel sources
perf beauty: Update copy of linux/socket.h with the kernel sources
tools headers UAPI: Sync kvm header with the kernel sources
tools headers x86 svm: Sync svm headers with the kernel sources
tools headers UAPI: Sync KVM's vmx.h header with the kernel sources
tools kvm headers arm64: Update KVM header from the kernel sources
tools headers UAPI: Sync linux/prctl.h with the kernel sources to pick FUTEX knob
perf mem: Document new output fields (op, cache, mem, dtlb, snoop)
tools headers: Update the fs headers with the kernel sources
perf test: Restrict uniquifying test to machines with 'uncore_imc'
adding the new mtd_master class, because it entirely fails the
partitioning if a specific Kconfig option is set. We need to think how
to handle that differently, so let's revert it as we need to get back to
the pen and paper situation again.
Otherwise the definition of some Winbond SPI NAND chips are receiving
some fixes (geometry and maximum frequency, mostly).
And finally a small memory leak gets also fixed.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmhVfg0ACgkQJWrqGEe9
VoTa8wf7BaY8T+mpA6zbgou4LBNFiqcB+NkL8N4uFOaVsGQYQfb5SX6m1CKitD8y
oIbkwYZI7c2R3ZuQ8vj6PgKwbG7HJrmSfO5dbWoamNJ6cE2Y1rQFJUCyE98zrO/g
MsZBy2PjBM3q5YRwuA0YzzHWQec4bXpeQlxUhk+VYGW/2BJdROUzmLebPz7cuKKx
m+VVLdVEByu41JaLE9j3+ntfFnoY3Fp5DooheGCCEAdHEv+drfcbLv2TEiy9wyCv
LLhau6MPaBDgL0+VIZd91Lgys7stFYtbPBSlItRsdZ91mRIVt8AtJAA0k0t8lQGo
srb8eSEbTeIVFkJjGC43utY6mIic1A==
=5vwJ
-----END PGP SIGNATURE-----
Merge tag 'mtd/fixes-for-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"The main fix that really needs to get in is the revert of the patch
adding the new mtd_master class, because it entirely fails the
partitioning if a specific Kconfig option is set. We need to think how
to handle that differently, so let's revert it as we need to get back
to the pen and paper situation again.
Otherwise the definition of some Winbond SPI NAND chips are receiving
some fixes (geometry and maximum frequency, mostly).
And finally a small memory leak gets also fixed"
* tag 'mtd/fixes-for-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: spinand: fix memory leak of ECC engine conf
mtd: spinand: winbond: Prevent unsupported frequencies on dual/quad I/O variants
mtd: spinand: winbond: Increase maximum frequency on an octal operation
mtd: spinand: winbond: Fix W35N number of planes/LUN
Revert "mtd: core: always create master device"
Exit to userspace for TDG.VP.VMCALL<GetTdVmCallInfo> via KVM_EXIT_TDX,
to allow userspace to provide information about the support of
TDVMCALLs when r12 is 1 for the TDVMCALLs beyond the GHCI base API.
GHCI spec defines the GHCI base TDVMCALLs: <GetTdVmCallInfo>, <MapGPA>,
<ReportFatalError>, <Instruction.CPUID>, <#VE.RequestMMIO>,
<Instruction.HLT>, <Instruction.IO>, <Instruction.RDMSR> and
<Instruction.WRMSR>. They must be supported by VMM to support TDX guests.
For GetTdVmCallInfo
- When leaf (r12) to enumerate TDVMCALL functionality is set to 0,
successful execution indicates all GHCI base TDVMCALLs listed above are
supported.
Update the KVM TDX document with the set of the GHCI base APIs.
- When leaf (r12) to enumerate TDVMCALL functionality is set to 1, it
indicates the TDX guest is querying the supported TDVMCALLs beyond
the GHCI base TDVMCALLs.
Exit to userspace to let userspace set the TDVMCALL sub-function bit(s)
accordingly to the leaf outputs. KVM could set the TDVMCALL bit(s)
supported by itself when the TDVMCALLs don't need support from userspace
after returning from userspace and before entering guest. Currently, no
such TDVMCALLs implemented, KVM just sets the values returned from
userspace.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
[Adjust userspace API. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle TDVMCALL for GetQuote to generate a TD-Quote.
GetQuote is a doorbell-like interface used by TDX guests to request VMM
to generate a TD-Quote signed by a service hosting TD-Quoting Enclave
operating on the host. A TDX guest passes a TD Report (TDREPORT_STRUCT) in
a shared-memory area as parameter. Host VMM can access it and queue the
operation for a service hosting TD-Quoting enclave. When completed, the
Quote is returned via the same shared-memory area.
KVM only checks the GPA from the TDX guest has the shared-bit set and drops
the shared-bit before exiting to userspace to avoid bleeding the shared-bit
into KVM's exit ABI. KVM forwards the request to userspace VMM (e.g. QEMU)
and userspace VMM queues the operation asynchronously. KVM sets the return
code according to the 'ret' field set by userspace to notify the TDX guest
whether the request has been queued successfully or not. When the request
has been queued successfully, the TDX guest can poll the status field in
the shared-memory area to check whether the Quote generation is completed
or not. When completed, the generated Quote is returned via the same
buffer.
Add KVM_EXIT_TDX as a new exit reason to userspace. Userspace is
required to handle the KVM exit reason as the initial support for TDX,
by reentering KVM to ensure that the TDVMCALL is complete. While at it,
add a note that KVM_EXIT_HYPERCALL also requires reentry with KVM_RUN.
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Tested-by: Mikko Ylinen <mikko.ylinen@linux.intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
[Adjust userspace API. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
and reinstates a Kconfig option to control the extra self-tests.
-----BEGIN PGP SIGNATURE-----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=6/TP
-----END PGP SIGNATURE-----
Merge tag 'v6.16-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a regression in ahash (broken fallback finup) and
reinstates a Kconfig option to control the extra self-tests"
* tag 'v6.16-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ahash - Fix infinite recursion in ahash_def_finup
crypto: testmgr - reinstate kconfig control over full self-tests
requires adding support for a number of new FW commands so
it's quite large in terms of LoC. The rest is relatively small.
Current release - fix to a fix:
- ptp: fix breakage after ptp_vclock_in_use() rework
Current release - regressions:
- openvswitch: allocate struct ovs_pcpu_storage dynamically, static
allocation may exhaust module loader limit on smaller systems
Previous releases - regressions:
- tcp: fix tcp_packet_delayed() for peers with no selective ACK support
Previous releases - always broken:
- wifi: ath12k: don't activate more links than firmware supports
- tcp: make sure sockets open via passive TFO have valid NAPI ID
- eth: bnxt_en: update MRU and RSS table of RSS contexts on queue reset,
prevent Rx queues from silently hanging after queue reset
- NFC: uart: set tty->disc_data only in success path
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=2mAa
-----END PGP SIGNATURE-----
Merge tag 'net-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless.
The ath12k fix to avoid FW crashes requires adding support for a
number of new FW commands so it's quite large in terms of LoC. The
rest is relatively small.
Current release - fix to a fix:
- ptp: fix breakage after ptp_vclock_in_use() rework
Current release - regressions:
- openvswitch: allocate struct ovs_pcpu_storage dynamically, static
allocation may exhaust module loader limit on smaller systems
Previous releases - regressions:
- tcp: fix tcp_packet_delayed() for peers with no selective ACK
support
Previous releases - always broken:
- wifi: ath12k: don't activate more links than firmware supports
- tcp: make sure sockets open via passive TFO have valid NAPI ID
- eth: bnxt_en: update MRU and RSS table of RSS contexts on queue
reset, prevent Rx queues from silently hanging after queue reset
- NFC: uart: set tty->disc_data only in success path"
* tag 'net-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (59 commits)
net: airoha: Differentiate hwfd buffer size for QDMA0 and QDMA1
net: airoha: Compute number of descriptors according to reserved memory size
tools: ynl: fix mixing ops and notifications on one socket
net: atm: fix /proc/net/atm/lec handling
net: atm: add lec_mutex
mlxbf_gige: return EPROBE_DEFER if PHY IRQ is not available
net: airoha: Always check return value from airoha_ppe_foe_get_entry()
NFC: nci: uart: Set tty->disc_data only in success path
calipso: Fix null-ptr-deref in calipso_req_{set,del}attr().
MAINTAINERS: Remove Shannon Nelson from MAINTAINERS file
net: lan743x: fix potential out-of-bounds write in lan743x_ptp_io_event_clock_get()
eth: fbnic: avoid double free when failing to DMA-map FW msg
tcp: fix passive TFO socket having invalid NAPI ID
selftests: net: add test for passive TFO socket NAPI ID
selftests: net: add passive TFO test binary
selftests: netdevsim: improve lib.sh include in peer.sh
tipc: fix null-ptr-deref when acquiring remote ip of ethernet bearer
Octeontx2-pf: Fix Backpresure configuration
net: ftgmac100: select FIXED_PHY
net: ethtool: remove duplicate defines for family info
...
- ath12k
- avoid busy-waiting
- activate correct number of links
- iwlwifi
- iwldvm regression (lots of warnings)
- iwlmld merge damage regression (crash)
- fix build with some old gcc versions
- carl9170: don't talk to device w/o FW [syzbot]
- ath6kl: remove bad FW WARN [syzbot]
- ieee80211: use variable-length arrays [syzbot]
- mac80211
- remove WARN on delayed beacon update [syzbot]
- drop OCB frames with invalid source [syzbot]
-----BEGIN PGP SIGNATURE-----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=Q6JR
-----END PGP SIGNATURE-----
Merge tag 'wireless-2025-06-18' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
More fixes:
- ath12k
- avoid busy-waiting
- activate correct number of links
- iwlwifi
- iwldvm regression (lots of warnings)
- iwlmld merge damage regression (crash)
- fix build with some old gcc versions
- carl9170: don't talk to device w/o FW [syzbot]
- ath6kl: remove bad FW WARN [syzbot]
- ieee80211: use variable-length arrays [syzbot]
- mac80211
- remove WARN on delayed beacon update [syzbot]
- drop OCB frames with invalid source [syzbot]
* tag 'wireless-2025-06-18' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: Fix incorrect logic on cmd_ver range checking
wifi: iwlwifi: dvm: restore n_no_reclaim_cmds setting
wifi: iwlwifi: cfg: Limit cb_size to valid range
wifi: iwlwifi: restore missing initialization of async_handlers_list (again)
wifi: ath6kl: remove WARN on bad firmware input
wifi: carl9170: do not ping device which has failed to load firmware
wifi: ath12k: don't wait when there is no vdev started
wifi: ath12k: don't use static variables in ath12k_wmi_fw_stats_process()
wifi: ath12k: avoid burning CPU while waiting for firmware stats
wifi: ath12k: fix documentation on firmware stats
wifi: ath12k: don't activate more links than firmware supports
wifi: ath12k: update link active in case two links fall on the same MAC
wifi: ath12k: support WMI_MLO_LINK_SET_ACTIVE_CMDID command
wifi: ath12k: update freq range for each hardware mode
wifi: ath12k: parse and save sbs_lower_band_end_freq from WMI_SERVICE_READY_EXT2_EVENTID event
wifi: ath12k: parse and save hardware mode info from WMI_SERVICE_READY_EXT_EVENTID event for later use
wifi: ath12k: Avoid CPU busy-wait by handling VDEV_STAT and BCN_STAT
wifi: mac80211: don't WARN for late channel/color switch
wifi: mac80211: drop invalid source address OCB frames
wifi: remove zero-length arrays
====================
Link: https://patch.msgid.link/20250618210642.35805-6-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit under fixes switched to uAPI generation from the YAML
spec. A number of custom defines were left behind, mostly
for commands very hard to express in YAML spec.
Among what was left behind was the name and version of
the generic netlink family. Problem is that the codegen
always outputs those values so we ended up with a duplicated,
differently named set of defines.
Provide naming info in YAML and remove the incorrect defines.
Fixes: 8d0580c6eb ("ethtool: regenerate uapi header from the spec")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250617202240.811179-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Force PIO for ATAPI devices on VT6415/VT6330 as the controller locks up
on ATAPI DMA (Tasos)
- Fix ACPI PATA cable type detection such that the controller is not
forced down to a slow transfer mode (Tasos)
- Fix build error on 32-bit UML (Johannes)
- Fix a PCI region leak in the pata_macio driver so that the driver no
longer fails to load after rmmod (Philipp)
- Use correct DMI BIOS build date for ThinkPad W541 quirk (me)
- Disallow LPM for ASUSPRO-D840SA motherboard as this board interestingly
enough gets graphical corruptions on the iGPU when LPM is enabled (me)
- Disallow LPM for Asus B550-F motherboard as this board will get command
timeouts on ports 5 and 6, yet LPM with the same drive works fine on
all other ports (Mikko)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCaFKSFwAKCRDJZDGjmcZN
colHAP9hxeB/ajtYDRUsOiR+TNSENruPwSEUTC/NNQGWHJdaugEA110Jx+HzFkb+
WCDjZTnlKSFTR+HOZlGqftPg8eAidQo=
=etpA
-----END PGP SIGNATURE-----
Merge tag 'ata-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- Force PIO for ATAPI devices on VT6415/VT6330 as the controller locks
up on ATAPI DMA (Tasos)
- Fix ACPI PATA cable type detection such that the controller is not
forced down to a slow transfer mode (Tasos)
- Fix build error on 32-bit UML (Johannes)
- Fix a PCI region leak in the pata_macio driver so that the driver no
longer fails to load after rmmod (Philipp)
- Use correct DMI BIOS build date for ThinkPad W541 quirk (me)
- Disallow LPM for ASUSPRO-D840SA motherboard as this board
interestingly enough gets graphical corruptions on the iGPU when LPM
is enabled (me)
- Disallow LPM for Asus B550-F motherboard as this board will get
command timeouts on ports 5 and 6, yet LPM with the same drive works
fine on all other ports (Mikko)
* tag 'ata-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: ahci: Disallow LPM for Asus B550-F motherboard
ata: ahci: Disallow LPM for ASUSPRO-D840SA motherboard
ata: ahci: Use correct BIOS build date for ThinkPad W541 quirk
ata: pata_macio: Fix PCI region leak
ata: pata_cs5536: fix build on 32-bit UML
ata: libata-acpi: Do not assume 40 wire cable if no devices are enabled
ata: pata_via: Force PIO for ATAPI devices on VT6415/VT6330
Dual and quad capable chips natively support dual and quad I/O variants
at up to 104MHz (1-2-2 and 1-4-4 operations). Reaching the maximum speed
of 166MHz is theoretically possible (while still unsupported in the
field) by adding a few more dummy cycles. Let's be accurate and clearly
state this limit.
Setting a maximum frequency implies adding the frequency parameter to
the macro, which is done using a variadic argument to avoid impacting
all the other drivers which already make use of this macro.
Fixes: 1ea808b4d1 ("mtd: spinand: winbond: Update the *JW chip definitions")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The idea behind this patch was to always let a "master" mtd device
available to anchor runtime PM. Historically, there was no mtd device
representing the whole storage as soon as partitions were coming into
play. The introduction of CONFIG_MTD_PARTITIONED_MASTER allowed to keep
this "master" device, but was not enabled by default to avoid breaking
existing users (otherwise the mtd device numbering would be totally
messed up with an off by 1, at least).
The approach of adding an mtd_master class on top of partitioned mtd
devices is breaking the mtd core in many creative ways, so better think
again this approach and revert the faulty changes for now.
This reverts commit 0aa7b390fc.
Fixes: 0aa7b390fc ("mtd: core: always create master device")
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
In vcc_sendmsg(), we account skb->truesize to sk->sk_wmem_alloc by
atm_account_tx().
It is expected to be reverted by atm_pop_raw() later called by
vcc->dev->ops->send(vcc, skb).
However, vcc_sendmsg() misses the same revert when copy_from_iter_full()
fails, and then we will leak a socket.
Let's factorise the revert part as atm_return_tx() and call it in
the failure path.
Note that the corresponding sk_wmem_alloc operation can be found in
alloc_tx() as of the blamed commit.
$ git blame -L:alloc_tx net/atm/common.c c55fa3cccb~
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/netdev/20250614161959.GR414686@horms.kernel.org/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250616182147.963333-3-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To pick up the changes in this cset:
1e7933a575 ("uapi: Revert "bitops: avoid integer overflow in GENMASK(_ULL)"")
5b572e8a9f ("bits: introduce fixed-type BIT_U*()")
19408200c0 ("bits: introduce fixed-type GENMASK_U*()")
31299a5e02 ("bits: add comments and newlines to #if, #else and #endif directives")
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/linux/bits.h include/linux/bits.h
Please see tools/include/uapi/README for further details.
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Cc: I Hsin Cheng <richard120310@gmail.com>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/aEr0ZJ60EbshEy6p@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the resctrl subsystem's Sub-NUMA Cluster (SNC) mode, the rdt_mon_domain
structure representing a NUMA node relies on the cacheinfo interface
(rdt_mon_domain::ci) to store L3 cache information (e.g., shared_cpu_map)
for monitoring. The L3 cache information of a SNC NUMA node determines
which domains are summed for the "top level" L3-scoped events.
rdt_mon_domain::ci is initialized using the first online CPU of a NUMA
node. When this CPU goes offline, its shared_cpu_map is cleared to contain
only the offline CPU itself. Subsequently, attempting to read counters
via smp_call_on_cpu(offline_cpu) fails (and error ignored), returning
zero values for "top-level events" without any error indication.
Replace the cacheinfo references in struct rdt_mon_domain and struct
rmid_read with the cacheinfo ID (a unique identifier for the L3 cache).
rdt_domain_hdr::cpu_mask contains the online CPUs associated with that
domain. When reading "top-level events", select a CPU from
rdt_domain_hdr::cpu_mask and utilize its L3 shared_cpu_map to determine
valid CPUs for reading RMID counter via the MSR interface.
Considering all CPUs associated with the L3 cache improves the chances
of picking a housekeeping CPU on which the counter reading work can be
queued, avoiding an unnecessary IPI.
Fixes: 328ea68874 ("x86/resctrl: Prepare for new Sub-NUMA Cluster (SNC) monitor files")
Signed-off-by: Qinyun Tan <qinyuntan@linux.alibaba.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250530182053.37502-2-qinyuntan@linux.alibaba.com
* Avoid using large pages for kernel mappings when PSE is not enumerated
* Avoid ever making indirect calls to TDX assembly helpers
* Fix a FRED single step issue when not using an external debugger
-----BEGIN PGP SIGNATURE-----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=BEsb
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Dave Hansen:
"This is a pretty scattered set of fixes. The majority of them are
further fixups around the recent ITS mitigations.
The rest don't really have a coherent story:
- Some flavors of Xen PV guests don't support large pages, but the
set_memory.c code assumes all CPUs support them.
Avoid problems with a quick CPU feature check.
- The TDX code has some wrappers to help retry calls to the TDX
module. They use function pointers to assembly functions and the
compiler usually generates direct CALLs. But some new compilers,
plus -Os turned them in to indirect CALLs and the assembly code was
not annotated for indirect calls.
Force inlining of the helper to fix it up.
- Last, a FRED issue showed up when single-stepping. It's fine when
using an external debugger, but was getting stuck returning from a
SIGTRAP handler otherwise.
Clear the FRED 'swevent' bit to ensure that forward progress is
made"
* tag 'x86_urgent_for_6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "mm/execmem: Unify early execmem_cache behaviour"
x86/its: explicitly manage permissions for ITS pages
x86/its: move its_pages array to struct mod_arch_specific
x86/Kconfig: only enable ROX cache in execmem when STRICT_MODULE_RWX is set
x86/mm/pat: don't collapse pages without PSE set
x86/virt/tdx: Avoid indirect calls to TDX assembly functions
selftests/x86: Add a test to detect infinite SIGTRAP handler loop
x86/fred/signal: Prevent immediate repeat of single step trap on return from SIGTRAP handler
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaE/PTwAKCRCRxhvAZXjc
oo7dAQDCEgd22Of2ibYK0wza1RE17Qjm1Qljt0tHUxki/3Gr/QD9EAJyIhEjplMj
ntEQrlByWVw8aOVWwtSjFVq55mMLrgI=
=SNXv
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.16-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix a regression in overlayfs caused by reworking the lookup_one*()
set of helpers
- Make sure that the name of the dentry is printed in overlayfs'
mkdir() helper
- Add missing iocb values to TRACE_IOCB_STRINGS define
- Unlock the superblock during iterate_supers_type(). This was an
accidental internal api change
- Drop a misleading assert in file_seek_cur_needs_f_lock() helper
- Never refuse to return PIDFD_GET_INGO when parent pid is zero
That can trivially happen in container scenarios where the parent
process might be located in an ancestor pid namespace
- Don't revalidate in try_lookup_noperm() as that causes regression for
filesystems such as cifs
- Fix simple_xattr_list() and reset the err variable after
security_inode_listsecurity() got called so as not to confuse
userspace about the length of the xattr
* tag 'vfs-6.16-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: drop assert in file_seek_cur_needs_f_lock
fs: unlock the superblock during iterate_supers_type
ovl: fix debug print in case of mkdir error
VFS: change try_lookup_noperm() to skip revalidation
fs: add missing values to TRACE_IOCB_STRINGS
fs/xattr.c: fix simple_xattr_list()
ovl: fix regression caused by lookup helpers API changes
pidfs: never refuse ppid == 0 in PIDFD_GET_INFO
-----BEGIN PGP SIGNATURE-----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=N1zM
-----END PGP SIGNATURE-----
Merge tag 'block-6.16-20250614' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Fix for a deadlock on queue freeze with zoned writes
- Fix for zoned append emulation
- Two bio folio fixes, for sparsemem and for very large folios
- Fix for a performance regression introduced in 6.13 when plug
insertion was changed
- Fix for NVMe passthrough handling for polled IO
- Document the ublk auto registration feature
- loop lockdep warning fix
* tag 'block-6.16-20250614' of git://git.kernel.dk/linux:
nvme: always punt polled uring_cmd end_io work to task_work
Documentation: ublk: Separate UBLK_F_AUTO_BUF_REG fallback behavior sublists
block: Fix bvec_set_folio() for very large folios
bio: Fix bio_first_folio() for SPARSEMEM without VMEMMAP
block: use plug request list tail for one-shot backmerge attempt
block: don't use submit_bio_noacct_nocheck in blk_zone_wplug_bio_work
block: Clear BIO_EMULATES_ZONE_APPEND flag on BIO completion
ublk: document auto buffer registration(UBLK_F_AUTO_BUF_REG)
loop: move lo_set_size() out of queue freeze
or aren't considered necessary for -stable kernels. Only 4 are for MM.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaE0BIAAKCRDdBJ7gKXxA
jkTMAQCTWhvZZdcEdyxo0HQbGo2pcqB4awXjire6GabBFcr1owD5AVV0OYiQNNEN
tbOVsr+2aZBr/aXTkTy4VpOg1kin8Ak=
=ThOY
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-06-13-21-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"9 hotfixes. 3 are cc:stable and the remainder address post-6.15 issues
or aren't considered necessary for -stable kernels. Only 4 are for MM"
* tag 'mm-hotfixes-stable-2025-06-13-21-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: add mmap_prepare() compatibility layer for nested file systems
init: fix build warnings about export.h
MAINTAINERS: add Barry as a THP reviewer
drivers/rapidio/rio_cm.c: prevent possible heap overwrite
mm: close theoretical race where stale TLB entries could linger
mm/vma: reset VMA iterator on commit_merge() OOM failure
docs: proc: update VmFlags documentation in smaps
scatterlist: fix extraneous '@'-sign kernel-doc notation
selftests/mm: skip failed memfd setups in gup_longterm
- Implement CpuId Rust abstraction and use it to fix doctest failure
related to the recently introduced cpumask abstraction (Viresh Kumar).
- Do minor cleanups in the `# Safety` sections for cpufreq abstractions
added recently (Viresh Kumar).
- Unbreak cpupower systemd service units installation on some systems
by adding a unitdir variable for specifying the location to install
them (Francesco Poli).
- Eliminate mwait_play_dead_cpuid_hint() again after reverting its
elimination during the 6.16 merge window due to a problem with
handling "dead" SMT siblings, but this time prevent leaving them in
C1 after initialization by taking them online and back offline when
a proper cpuidle driver for the platform has been registered (Rafael
Wysocki).
- Update data types of variables passed as arguments to
mwait_idle_with_hints() to match the function definition
after recent changes (Uros Bizjak).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmhMgawSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1dA0H/j7V4sfA383pZfWwegRC4MQeiW4EVdIx
2G6d33Gsfv+zEzTSsPvtKghR4eUIldTdco04bqusMcI+qIfgdWIEBpi2tQhJU2Tt
Bgc24Kya0n85KKNLHs60xm0WXhkAyu3TFad+4yTGXRZEmAD+O6lyUPjum+mn+gbx
HuLE6KE9D/qzzYOU03kjCsJExBf7vv0bBNIqGqNyuFLYOaoqZd5rLhNhhxm2AkYi
hZ5wmYBY+2SJRzwryNNHQKKmZ1jk9HGapnIVrxQ2Pjc0AhX+tRW7FI5lDDvUWtW+
RN/226Y3OQ3JHXAj4S0K64t0ZEpiEKS2oPatjGzosNmdyI0f+CRACQs=
=OcND
-----END PGP SIGNATURE-----
Merge tag 'pm-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the cpupower utility installation, fix up the recently added
Rust abstractions for cpufreq and OPP, restore the x86 update
eliminating mwait_play_dead_cpuid_hint() that has been reverted during
the 6.16 merge window along with preventing the failure caused by it
from happening, and clean up mwait_idle_with_hints() usage in
intel_idle:
- Implement CpuId Rust abstraction and use it to fix doctest failure
related to the recently introduced cpumask abstraction (Viresh
Kumar)
- Do minor cleanups in the `# Safety` sections for cpufreq
abstractions added recently (Viresh Kumar)
- Unbreak cpupower systemd service units installation on some systems
by adding a unitdir variable for specifying the location to install
them (Francesco Poli)
- Eliminate mwait_play_dead_cpuid_hint() again after reverting its
elimination during the 6.16 merge window due to a problem with
handling "dead" SMT siblings, but this time prevent leaving them in
C1 after initialization by taking them online and back offline when
a proper cpuidle driver for the platform has been registered
(Rafael Wysocki)
- Update data types of variables passed as arguments to
mwait_idle_with_hints() to match the function definition after
recent changes (Uros Bizjak)"
* tag 'pm-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
rust: cpu: Add CpuId::current() to retrieve current CPU ID
rust: Use CpuId in place of raw CPU numbers
rust: cpu: Introduce CpuId abstraction
intel_idle: Update arguments of mwait_idle_with_hints()
cpufreq: Convert `/// SAFETY` lines to `# Safety` sections
cpupower: split unitdir from libdir in Makefile
Reapply "x86/smp: Eliminate mwait_play_dead_cpuid_hint()"
ACPI: processor: Rescan "dead" SMT siblings during initialization
intel_idle: Rescan "dead" SMT siblings during initialization
x86/smp: PM/hibernate: Split arch_resume_nosmt()
intel_idle: Use subsys_initcall_sync() for initialization
Merge cpuidle updates for 6.16-rc2:
- Update data types of variables passed as arguments to
mwait_idle_with_hints() to match the function definition
after recent changes (Uros Bizjak).
- Eliminate mwait_play_dead_cpuid_hint() again after reverting its
elimination during the merge window due to a problem with handling
"dead" SMT siblings, but this time prevent leaving them in C1 after
initialization by taking them online and back offline when a proper
cpuidle driver for the platform has been registered (Rafael Wysocki).
* pm-cpuidle:
intel_idle: Update arguments of mwait_idle_with_hints()
Reapply "x86/smp: Eliminate mwait_play_dead_cpuid_hint()"
ACPI: processor: Rescan "dead" SMT siblings during initialization
intel_idle: Rescan "dead" SMT siblings during initialization
x86/smp: PM/hibernate: Split arch_resume_nosmt()
intel_idle: Use subsys_initcall_sync() for initialization
Similarly to 26064d3e2b ("block: fix adding folio to bio"), if
we attempt to add a folio that is larger than 4GB, we'll silently
truncate the offset and len. Widen the parameters to size_t, assert
that the length is less than 4GB and set the first page that contains
the interesting data rather than the first page of the folio.
Fixes: 26db5ee158 (block: add a bvec_set_folio helper)
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20250612144255.2850278-1-willy@infradead.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is possible for physically contiguous folios to have discontiguous
struct pages if SPARSEMEM is enabled and SPARSEMEM_VMEMMAP is not.
This is correctly handled by folio_page_idx(), so remove this open-coded
implementation.
Fixes: 640d1930be (block: Add bio_for_each_folio_all())
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20250612144126.2849931-1-willy@infradead.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 698de82278 ("crypto: testmgr - make it easier to enable the
full set of tests") removed support for building kernels that run only
the "fast" set of crypto self-tests by default. This assumed that
nearly everyone actually wanted the full set of tests, *if* they had
already chosen to enable the tests at all.
Unfortunately, it turns out that both Debian and Fedora intentionally
have the crypto self-tests enabled in their production kernels. And for
production kernels we do need to keep the testing time down, which
implies just running the "fast" tests, not the full set of tests.
For Fedora, a reason for enabling the tests in production is that they
are being (mis)used to meet the FIPS 140-3 pre-operational testing
requirement.
However, the other reason for enabling the tests in production, which
applies to both distros, is that they provide some value in protecting
users from buggy drivers. Unfortunately, the crypto/ subsystem has many
buggy and untested drivers for off-CPU hardware accelerators on rare
platforms. These broken drivers get shipped to users, and there have
been multiple examples of the tests preventing these buggy drivers from
being used. So effectively, the tests are being relied on in production
kernels. I think this is kind of crazy (untested drivers should just
not be enabled at all), but that seems to be how things work currently.
Thus, reintroduce a kconfig option that controls the level of testing.
Call it CRYPTO_SELFTESTS_FULL instead of the original name
CRYPTO_MANAGER_EXTRA_TESTS, which was slightly misleading.
Moreover, given the "production kernel" use case, make CRYPTO_SELFTESTS
depend on EXPERT instead of DEBUG_KERNEL.
I also haven't reinstated all the #ifdefs in crypto/testmgr.c. Instead,
just rely on the compiler to optimize out unused code.
Fixes: 40b9969796 ("crypto: testmgr - replace CRYPTO_MANAGER_DISABLE_TESTS with CRYPTO_SELFTESTS")
Fixes: 698de82278 ("crypto: testmgr - make it easier to enable the full set of tests")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Nested file systems, that is those which invoke call_mmap() within their
own f_op->mmap() handlers, may encounter underlying file systems which
provide the f_op->mmap_prepare() hook introduced by commit c84bf6dd2b
("mm: introduce new .mmap_prepare() file callback").
We have a chicken-and-egg scenario here - until all file systems are
converted to using .mmap_prepare(), we cannot convert these nested
handlers, as we can't call f_op->mmap from an .mmap_prepare() hook.
So we have to do it the other way round - invoke the .mmap_prepare() hook
from an .mmap() one.
in order to do so, we need to convert VMA state into a struct vm_area_desc
descriptor, invoking the underlying file system's f_op->mmap_prepare()
callback passing a pointer to this, and then setting VMA state accordingly
and safely.
This patch achieves this via the compat_vma_mmap_prepare() function, which
we invoke from call_mmap() if f_op->mmap_prepare() is specified in the
passed in file pointer.
We place the fundamental logic into mm/vma.h where VMA manipulation
belongs. We also update the VMA userland tests to accommodate the
changes.
The compat_vma_mmap_prepare() function and its associated machinery is
temporary, and will be removed once the conversion of file systems is
complete.
We carefully place this code so it can be used with CONFIG_MMU and also
with cutting edge nommu silicon.
[akpm@linux-foundation.org: export compat_vma_mmap_prepare tp fix build]
[lorenzo.stoakes@oracle.com: remove unused declarations]
Link: https://lkml.kernel.org/r/ac3ae324-4c65-432a-8c6d-2af988b18ac8@lucifer.local
Link: https://lkml.kernel.org/r/20250609165749.344976-1-lorenzo.stoakes@oracle.com
Fixes: c84bf6dd2b ("mm: introduce new .mmap_prepare() file callback").
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Closes: https://lore.kernel.org/linux-mm/CAG48ez04yOEVx1ekzOChARDDBZzAKwet8PEoPM4Ln3_rk91AzQ@mail.gmail.com/
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
