Instead of relying on pitch (in pixels) == width, use the FB pitch. This
is less confusing to readers, and works correctly if we ever support FBs
with a pitch (in pixels) != width.
This also makes the code symmetrical with fill_plane_buffer_attributes.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of silently failing the atomic check, explain what happened via
a debug log. This makes it easier for user-space to figure out why
something failed.
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just query the metrics table directly rather than going through
an extra level of functions.
v2: use proper enum
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes voltage reading for vddgfx and adds support for vddsoc.
v2: use new voltage enum
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just query the metrics table directly rather than going through
an extra level of functions.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To be used in subsequent patches.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just query the metrics table directly rather than going through
an extra level of functions.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just query the metrics table directly rather than going through
an extra level of functions.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just query the metrics table directly rather than going through
an extra level of functions.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than just silently dropping it. Also fixes a set but
unused variable warning.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than just silently dropping it. Also fixes a set but
unused variable warning.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than just silently dropping it. Also fixes a set but
unused variable warning.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than just silently dropping it. Also fixes a set but
unused variable warning.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than just silently dropping it. Also fixes a set but
unused variable warning.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Port from VCN2.5
SCRATCH2 is used to keep decode wptr as a workaround
which fix a hardware DPG decode wptr update bug for
vcn2.5 beforehand.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Port from VCN2.5
Add vcn dpg harware synchronization to fix race condition
issue between vcn driver and hardware.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If arbitration is lost, the master automatically changes to slave mode.
I2SR_IBB may or may not be reset by hardware. Raising a STOP condition
by resetting I2CR_MSTA has no effect and will not clear I2SR_IBB.
So calling i2c_imx_bus_busy() is not required and would busy-wait until
timeout.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Tested (not extensively) on Vybrid VF500 (Toradex VF50):
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org # Requires trivial backporting, simple remove
# the 3rd argument from the calls to
# i2c_imx_bus_busy().
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Arbitration Lost (IAL) can happen after every single byte transfer. If
arbitration is lost, the I2C hardware will autonomously switch from
master mode to slave. If a transfer is not aborted in this state,
consecutive transfers will not be executed by the hardware and will
timeout.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Tested (not extensively) on Vybrid VF500 (Toradex VF50):
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Wolfram Sang <wsa@kernel.org>
According to the "VFxxx Controller Reference Manual" (and the comment
block starting at line 97), Vybrid requires writing a one for clearing
an interrupt flag. Syncing the method for clearing I2SR_IIF in
i2c_imx_isr().
Signed-off-by: Christian Eggers <ceggers@arri.de>
Fixes: 4b775022f6 ("i2c: imx: add struct to hold more configurable quirks")
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Wolfram Sang <wsa@kernel.org>
- Fix numerous issues with instrumentation and exception entry
- Fix hideous typo in unused register field definition
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl/HvbwQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNFTMB/oD0ucfP6CH65w+7Sbsv2L8FABfYzSrA9gP
f1cmeh1+MyRN4Nbx2ves5wcRGoX1CgZ8KFAmLXG6yyn7UDA/q27CTELknwobhOft
tQIPB2hFDW9qq3VBXFReL3aoXLnWUiRL3nBxQFt7LG1Xor/ivEb1ZFht351UklDh
u1P6NVptpjXFuGPvdqxkHo2WzT0QHI57MRuc1l7I1FRo4dV1nKSlwohu0Ydii4q9
8oLhx77Ga1SWK80IztNmpo7CSMP/FLGDwbUE3vAaftUJx5CBt+lYR1CeWNACSEvy
22y7CkJWKGQccG62oHI7zQaZm1+fum70ndP5dDlfQW/BcCaz8vRH
=KSDc
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"I'm sad to say that we've got an unusually large arm64 fixes pull for
rc7 which addresses numerous significant instrumentation issues with
our entry code.
Without these patches, lockdep is hopelessly unreliable in some
configurations [1,2] and syzkaller is therefore not a lot of use
because it's so noisy.
Although much of this has always been broken, it appears to have been
exposed more readily by other changes such as 044d0d6de9 ("lockdep:
Only trace IRQ edges") and general lockdep improvements around IRQ
tracing and NMIs.
Fixing this properly required moving much of the instrumentation hooks
from our entry assembly into C, which Mark has been working on for the
last few weeks. We're not quite ready to move to the recently added
generic functions yet, but the code here has been deliberately written
to mimic that closely so we can look at cleaning things up once we
have a bit more breathing room.
Having said all that, the second version of these patches was posted
last week and I pushed it into our CI (kernelci and cki) along with a
commit which forced on PROVE_LOCKING, NOHZ_FULL and
CONTEXT_TRACKING_FORCE. The result? We found a real bug in the
md/raid10 code [3].
Oh, and there's also a really silly typo patch that's unrelated.
Summary:
- Fix numerous issues with instrumentation and exception entry
- Fix hideous typo in unused register field definition"
[1] https://lore.kernel.org/r/CACT4Y+aAzoJ48Mh1wNYD17pJqyEcDnrxGfApir=-j171TnQXhw@mail.gmail.com
[2] https://lore.kernel.org/r/20201119193819.GA2601289@elver.google.com
[3] https://lore.kernel.org/r/94c76d5e-466a-bc5f-e6c2-a11b65c39f83@redhat.com
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mte: Fix typo in macro definition
arm64: entry: fix EL1 debug transitions
arm64: entry: fix NMI {user, kernel}->kernel transitions
arm64: entry: fix non-NMI kernel<->kernel transitions
arm64: ptrace: prepare for EL1 irq/rcu tracking
arm64: entry: fix non-NMI user<->kernel transitions
arm64: entry: move el1 irq/nmi logic to C
arm64: entry: prepare ret_to_user for function call
arm64: entry: move enter_from_user_mode to entry-common.c
arm64: entry: mark entry code as noinstr
arm64: mark idle code as noinstr
arm64: syscall: exit userspace before unmasking exceptions
A couple of fixes that surfaced at the last minute.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl/HYDoPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpAlcIAKqNeivPCnQMwn8dgi12wvEEa45KANom/Zmt
L48q/Lbx2gbORio6vpCtjLwGd/biHG7rVZCyXu0UIdDDIprOVtDxpHpXfZOV7Qqd
2CGEYnYIY+GFwluskOEi+dIZmP0C2qa1q8y+BzpfuZrXTlG7h0onqR+LNqcoaTTN
P5jFnUzwfB1hEdb4ShHWUDTc7FweyrK/rbcIWCL7kgjl9drVgy6pLBXCJOad4kE7
z7tZCrWiQ7cHGwApojo8FjUAyT0nA24J8p9JHMIKUHVVTVNlvrZaOunyWan50NeB
nPXR64StmWex7S9Jl2juA8XihPenSE9MwVL7wmzN4jLSLhMSQR4=
=9f9c
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull vdpa fixes from Michael Tsirkin:
"A couple of fixes that surfaced at the last minute"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost_vdpa: return -EFAULT if copy_to_user() fails
vdpa: mlx5: fix vdpa/vhost dependencies
Here are the pending sound fixes for 5.10: all small device-specific
fixes, and nothing particular stands out, so far.
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAl/HU9QOHHRpd2FpQHN1
c2UuZGUACgkQLtJE4w1nLE+yKxAAvA8rsSYYmP7ToAFN7OO7kM+YmRQyIBiTc6fj
yjp942LtjhP0sih//ozN7aeVgQ0sQTDpC9UiXnAumwYNelfaCPtNySsNmtPRlPnk
53x+vIgrtaL0AjU/oJ1w01jH2B4cX2/wOI6tlb/yp9SpXO4AgvGzqFXDOED8TRtM
GlhK7V6E//5bBIUU5yN+X4glfl3lGlQ/8QJISZ888I8LItf4Peo6Me6s+p2jAr4l
QyMHs/HInodCfH7gCWsCL55bSxm3jJ99zERVbcXGgfq5H9bRh6Iob8mtMuP5g2nB
zHnibBYY+PazmEf8d/PDKRtT+xELspODxhd7agr2ISuKZeRcuhMxNKfjYjYWqJf3
V7J9gBwi1tvJszpJCzEseu6ulb5nnrDvBwPZIw8ib4gnvHD8Aed/v2NBaUm9g8rF
qdkqLIalUxtCTyhlZKIGeYTGCAV+WD+fxbHRCtSuEdNQxPp+p8EiJiSGsxTiwYZo
+4MWD0aR8+7YlVUj5ONiLHznZOKXcgSr7CyXG9x+8YXie5X4SY81txR97KjDTOzG
cZgxl7d1bkCQrYOO+/C0MGd9k9/8rnkNhTEhoXTAkfZg3jFOrFH1dMd8FU681OV2
Lt+zpgNzdImvijkD73pU/k1dq3YkLheR52Zk+PQ4drrPgUSylUDVzDWZ+3srN23/
SRsjZPI=
=veB2
-----END PGP SIGNATURE-----
Merge tag 'sound-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here are the pending sound fixes for 5.10: all small device-specific
fixes, and nothing particular stands out, so far"
* tag 'sound-5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Add mute LED quirk to yet another HP x360 model
ALSA: hda/realtek: Fix bass speaker DAC assignment on Asus Zephyrus G14
ALSA: hda/generic: Add option to enforce preferred_dacs pairs
ALSA: usb-audio: US16x08: fix value count for level meters
ALSA: hda/realtek - Add new codec supported for ALC897
ASoC: rt5682: change SAR voltage threshold
ASoC: wm_adsp: fix error return code in wm_adsp_load()
ALSA: hda/realtek: Enable headset of ASUS UX482EG & B9400CEA with ALC294
ASoC: qcom: Fix enabling BCLK and LRCLK in LPAIF invalid state
ALSA: hda/realtek - Fixed Dell AIO wrong sound tone
ASoC: Intel: bytcr_rt5640: Fix HP Pavilion x2 Detachable quirks
In case the bootconfig is created on one kind of endian machine, and then
read on the other kind of endian kernel, the size and checksum will be
incorrect. Instead, have both the size and checksum always be little
endian and have the tool and the kernel convert it from little endian to
or from the host endian.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCX8brThQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qiBMAQDe1vsp/SyHO9H5pnsepdmk4fERn0bC
Q0qtCoYp1xUKOQEAjnOJKdCE1O6n24u+b+3jw3BHswQLyUKOFaPcIM7jSgM=
=Z6kA
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.10-rc6-bootconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull bootconfig fixes from Steven Rostedt:
"Have bootconfig size and checksum be little endian
In case the bootconfig is created on one kind of endian machine, and
then read on the other kind of endian kernel, the size and checksum
will be incorrect. Instead, have both the size and checksum always be
little endian and have the tool and the kernel convert it from little
endian to or from the host endian"
* tag 'trace-v5.10-rc6-bootconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
docs: bootconfig: Add the endianness of fields
tools/bootconfig: Store size and checksum in footer as le32
bootconfig: Load size and checksum in the footer as le32
The timestamp fields should be copied to new skb too in
A-050385 workaround for later TX timestamping handling.
Fixes: 3c68b8fffb ("dpaa_eth: FMan erratum A050385 workaround")
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Link: https://lore.kernel.org/r/20201201075258.1875-1-yangbo.lu@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzkaller managed to crash the kernel using an NBMA ip6gre interface. I
could reproduce it creating an NBMA ip6gre interface and forwarding
traffic to it:
skbuff: skb_under_panic: text:ffffffff8250e927 len:148 put:44 head:ffff8c03c7a33
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:109!
Call Trace:
skb_push+0x10/0x10
ip6gre_header+0x47/0x1b0
neigh_connected_output+0xae/0xf0
ip6gre tunnel provides its own header_ops->create, and sets it
conditionally when initializing the tunnel in NBMA mode. When
header_ops->create is used, dev->hard_header_len should reflect the
length of the header created. Otherwise, when not used,
dev->needed_headroom should be used.
Fixes: eb95f52fc7 ("net: ipv6_gre: Fix GRO to work on IPv6 over GRE tap")
Cc: Maria Pasechnik <mariap@mellanox.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/20201130161911.464106-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The NO_160 flag specifies if the device doesn't have 160 MHz support,
but we errorneously assumed the opposite. If the flag was set, we
were considering that 160 MHz was supported, but it's actually the
opposite. Fix it by inverting the bits, i.e. NO_160 is 0x1 and 160
is 0x0.
Fixes: d6f2134a38 ("iwlwifi: add mac/rf types and 160MHz to the device tables")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201202143859.375bec857ccb.I83884286b688965293e9810381808039bd7eedae@changeid
With commit 58c644ba51 ("sched/idle: Fix arch_cpu_idle() vs
tracing") common code calls arch_cpu_idle() with a lockdep state that
tells irqs are on.
This doesn't work very well for s390: psw_idle() will enable interrupts
to wait for an interrupt. As soon as an interrupt occurs the interrupt
handler will verify if the old context was psw_idle(). If that is the
case the interrupt enablement bits in the old program status word will
be cleared.
A subsequent test in both the external as well as the io interrupt
handler checks if in the old context interrupts were enabled. Due to
the above patching of the old program status word it is assumed the
old context had interrupts disabled, and therefore a call to
TRACE_IRQS_OFF (aka trace_hardirqs_off_caller) is skipped. Which in
turn makes lockdep incorrectly "think" that interrupts are enabled
within the interrupt handler.
Fix this by unconditionally calling TRACE_IRQS_OFF when entering
interrupt handlers. Also call unconditionally TRACE_IRQS_ON when
leaving interrupts handlers.
This leaves the special psw_idle() case, which now returns with
interrupts disabled, but has an "irqs on" lockdep state. So callers of
psw_idle() must adjust the state on their own, if required. This is
currently only __udelay_disabled().
Fixes: 58c644ba51 ("sched/idle: Fix arch_cpu_idle() vs tracing")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The directed MSIs are delivered to CPUs whose address is
written to the MSI message address. The current code assumes
that a CPU logical number (as it is seen by the kernel)
is also the CPU address.
The above assumption is not correct, as the CPU address
is rather the value returned by STAP instruction. That
value does not necessarily match the kernel logical CPU
number.
Fixes: e979ce7bce ("s390/pci: provide support for CPU directed interrupts")
Cc: <stable@vger.kernel.org> # v5.2+
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
During cci_isr() errors read from register fields belonging to
i2c master1 are currently assigned to the status field belonging to
i2c master0. This patch corrects this error, and always assigns
master1 errors to the status field of master1.
Fixes: e517526195 ("i2c: Add Qualcomm CCI I2C driver")
Reported-by: Loic Poulain <loic.poulain@linaro.org>
Suggested-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
It seems like we can't have nice things, so let's just document the
disappointing behaviour instead.
The previous version assumed the kernel would perform the probing work
when appropriate, however this is not the case today. Update the
documentation to reflect reality.
v2:
- Improve commit message to explain why this change is made (Pekka)
- Keep the bit about flickering (Daniel)
- Explain when user-space should force-probe, and when it shouldn't (Daniel)
Signed-off-by: Simon Ser <contact@emersion.fr>
Fixes: 2ac5ef3b23 ("drm: document drm_mode_get_connector")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/AxqLnTAsFCRishOVB5CLsqIesmrMrm7oytnOVB7oPA@cp7-web-043.plabs.ch
Some functions has a different name between their prototypes
and the corresponding kernel-doc markups.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This can be hit by an HPT guest running on an HPT host and bring down
the host, so it's quite important to fix.
Fixes: 7290f3b3d3 ("powerpc/64s/powernv: machine check dump SLB contents")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201128070728.825934-2-npiggin@gmail.com
Currently the call to vidtv_psi_pat_table_destroy frees the object
m->si.pat however m->si.pat->num_pmt is being accessed after the
free. Fix this by destroying m->si.pat after the m->si.pmt_secs[]
objects have been freed.
Addresses-Coverity: ("Read from pointer after free")
Reported-by: Cengiz Can <cengiz@kernel.wtf> # sent a similar fix about the same time
Fixes: 039b7caed1 ("media: vidtv: add a PID entry for the NIT table")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
We need to set ->need_cache_sync_on_prepare and
->need_cache_sync_on_finish when we initialize vb2 buffer.
Currently these flags are set/adjusted only in V4L2's
vb2_queue_or_prepare_buf(), which means that for the code
paths that don't use V4L2 vb2 will always tell videobuf2
core to skip ->prepare() and ->finish() cache syncs/flushes.
Fix this by setting cache sync hints for new buffers; except
VB2_MEMORY_DMABUF buffers, for which DMA exporter syncs
caches.
Fixes: f5f5fa73fb ("media: videobuf2: handle V4L2 buffer cache flags")
Reported-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This an incremental refactor towards multiple dma-fence contexts
in virtio-gpu. Since all fences are still allocated using
&virtio_gpu_fence_driver.context, nothing should break and every
processed fence will be signaled.
The overall idea is every 3D context can allocate a number of
dma-fence contexts. Each dma-fence context refers to it's own
timeline.
For example, consider the following case where virgl submits
commands to the GPU (fence ids 1, 3) and does a metadata query with
the CPU (fence id 5). In a different process, gfxstream submits
commands to the GPU (fence ids 2, 4).
fence_id (&dma_fence.seqno) | 1 2 3 4 5
----------------------------------|-----------
fence_ctx 0 (virgl gpu) | 1 3
fence_ctx 1 (virgl metadata query)| 5
fence_ctx 2 (gfxstream gpu) | 2 4
With multiple fence contexts, we can wait for the metadata query
to finish without waiting for the virgl gpu to finish. virgl gpu
does not have to wait for gfxstream gpu. The fence id still is the
monotonically increasing sequence number, but it's only revelant to
the specific dma-fence context.
To fully enable this feature, we'll need to:
- have each 3d context allocate a number of fence contexts. Not
too hard with explicit context initialization on the horizon.
- have guest userspace specify fence context when performing
ioctls.
- tag each fence emitted to the host with the fence context
information. virtio_gpu_ctrl_hdr has padding + flags available,
so that should be easy.
This change goes in the direction specified above, by:
- looking up the virtgpu_fence given a fence_id
- signalling all prior fences in a given context
- signalling current fence
v2: fix grammar in comment
v3: add r-b tags
Reviewed-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20201201021623.619-3-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
virtio_gpu_fence_event_process sets the last_fence_id and
subsequently calls dma_fence_signal_locked(..).
dma_fence_signal_locked(..) sets DMA_FENCE_FLAG_SIGNALED_BIT,
which is actually checked before &dma_fence_ops.(*signaled) is
called.
The check for last_fence_id is therefore a bit redundant, and
it will not be sufficient to check the last_fence_id for multiple
synchronization timelines. Remove it.
v3: add r-b tags
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20201201021623.619-2-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
virtio_gpu typically uses the prefix virtio_gpu, but there are
a few places where the virtio prefix is used. Modify this for
consistency.
v3: add r-b tags
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20201201021623.619-1-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If we get a FSC_PERM fault, just using (logging_active && writable) to
determine calling kvm_pgtable_stage2_map(). There will be two more cases
we should consider.
(1) After logging_active is configged back to false from true. When we
get a FSC_PERM fault with write_fault and adjustment of hugepage is needed,
we should merge tables back to a block entry. This case is ignored by still
calling kvm_pgtable_stage2_relax_perms(), which will lead to an endless
loop and guest panic due to soft lockup.
(2) We use (FSC_PERM && logging_active && writable) to determine
collapsing a block entry into a table by calling kvm_pgtable_stage2_map().
But sometimes we may only need to relax permissions when trying to write
to a page other than a block.
In this condition,using kvm_pgtable_stage2_relax_perms() will be fine.
The ISS filed bit[1:0] in ESR_EL2 regesiter indicates the stage2 lookup
level at which a D-abort or I-abort occurred. By comparing granule of
the fault lookup level with vma_pagesize, we can strictly distinguish
conditions of calling kvm_pgtable_stage2_relax_perms() or
kvm_pgtable_stage2_map(), and the above two cases will be well considered.
Suggested-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201201201034.116760-4-wangyanan55@huawei.com
When dirty logging is enabled, we collapse block entries into tables
as necessary. If dirty logging gets canceled, we can end-up merging
tables back into block entries.
When this happens, we must not only free the non-huge page-table
pages but also invalidate all the TLB entries that can potentially
cover the block. Otherwise, we end-up with multiple possible translations
for the same physical page, which can legitimately result in a TLB
conflict.
To address this, replease the bogus invalidation by IPA with a full
VM invalidation. Although this is pretty heavy handed, it happens
very infrequently and saves a bunch of invalidations by IPA.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
[maz: fixup commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201201201034.116760-3-wangyanan55@huawei.com
When installing a new leaf PTE onto an invalid ptep, we need to
get_page(ptep) to account for the new mapping.
However, simply updating a valid PTE shouldn't result in any
additional refcounting, as there is new mapping. This otherwise
results in a page being forever wasted.
Address this by fixing-up the refcount in stage2_map_walker_try_leaf()
if the PTE was already valid, balancing out the later get_page()
in stage2_map_walk_leaf().
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
[maz: update commit message, add comment in the code]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201201201034.116760-2-wangyanan55@huawei.com
pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to putting operation will result in a
reference leak here.
A new function pm_runtime_resume_and_get is introduced in
[0] to keep usage counter balanced. So We fix the reference
leak by replacing it with new funtion.
[0] dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
Fixes: c2df3de0d0 ("gpio: zynq: properly support runtime PM for GPIO used as interrupts")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
A similar check was added in gpiochip_generic_request, but not in free.
This has caused an imbalance count of request vs. free calls to the
pinctrl driver. This patch is targeted to fix that issue.
Fixes: 2ab73c6d83 ("gpio: Support GPIO controllers without pin-ranges")
Signed-off-by: Edmond Chung <edmondchung@google.com>
Signed-off-by: Andrew Chant <achant@google.com>
Signed-off-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
