Commit graph

93,853 commits

Author SHA1 Message Date
Linus Torvalds
4075ea8c54 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac: misc small cleanups
  amd64_edac: fix ecc_enable_override handling
  amd64_edac: check only ECC bit in amd64_determine_edac_cap
2009-06-26 09:39:40 -07:00
Linus Torvalds
919a6d10fd Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (29 commits)
  powerpc/rtas: Fix watchdog driver temperature read functionality
  powerpc/mm: Fix potential access to freed pages when using hugetlbfs
  powerpc/440: Fix warning early debug code
  powerpc/of: Fix usage of dev_set_name() in of_device_alloc()
  powerpc/pasemi: Use raw spinlock in SMP TB sync
  powerpc: Use one common impl. of RTAS timebase sync and use raw spinlock
  powerpc/rtas: Turn rtas lock into a raw spinlock
  powerpc: Add irqtrace support for 32-bit powerpc
  powerpc/BSR: Fix BSR to allow mmap of small BSR on 64k kernel
  powerpc/BSR: add 4096 byte BSR size
  powerpc: Map more memory early on 601 processors
  powerpc/pmac: Fix DMA ops for MacIO devices
  powerpc/mm: Make k(un)map_atomic out of line
  powerpc: Fix mpic alloc warning
  powerpc: Fix output from show_regs
  powerpc/pmac: Fix issues with PowerMac "PowerSurge" SMP
  powerpc/amigaone: Limit ISA I/O range to 4k in the device tree
  powerpc/warp: Platform fix for i2c change
  powerpc: Have git ignore generated files from dtc compile
  powerpc/mpic: Fix mapping of "DCR" based MPIC variants
  ...
2009-06-26 09:39:02 -07:00
Linus Torvalds
cf2acfb205 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: video: prevent NULL deref in acpi_get_pci_dev()
  eeepc-laptop: add rfkill support for the 3G modem in Eee PC 901 Go
  eeepc-laptop: get the right value for CMSG
  eeepc-laptop: makes get_acpi() returns -ENODEV
  eeepc-laptop: right parent device
  eeepc-laptop: rfkill refactoring
  eeepc-laptop.c: use pr_fmt and pr_<level>
  eeepc-laptop: Register as a pci-hotplug device
2009-06-26 09:37:52 -07:00
Anton Vorontsov
b9389796fa sky2: Fix checksum endianness
sky2 driver on PowerPC targets floods kernel log with following errors:

  eth1: hw csum failure.
  Call Trace:
  [ef84b8a0] [c00075e4] show_stack+0x50/0x160 (unreliable)
  [ef84b8d0] [c02fa178] netdev_rx_csum_fault+0x3c/0x5c
  [ef84b8f0] [c02f6920] __skb_checksum_complete_head+0x7c/0x84
  [ef84b900] [c02f693c] __skb_checksum_complete+0x14/0x24
  [ef84b910] [c0337e08] tcp_v4_rcv+0x4c8/0x6f8
  [ef84b940] [c031a9c8] ip_local_deliver+0x98/0x210
  [ef84b960] [c031a788] ip_rcv+0x38c/0x534
  [ef84b990] [c0300338] netif_receive_skb+0x260/0x36c
  [ef84b9c0] [c025de00] sky2_poll+0x5dc/0xcf8
  [ef84ba20] [c02fb7fc] net_rx_action+0xc0/0x144

The NIC is Yukon-2 EC chip revision 1.

Converting checksum field from le16 to CPU byte order fixes the issue.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-26 09:28:42 -07:00
Christof Schmitt
39562e7839 [SCSI] FC transport: Locking fix for common-code FC pass-through patch
Fix this:
------------[ cut here ]------------
Badness at block/blk-core.c:244
CPU: 0 Tainted: G        W  2.6.31-rc1-00004-gd3a263a #3
Process zfcp_wq (pid: 901, task: 000000002fb7a038, ksp: 000000002f02bc78)
Krnl PSW : 0704300180000000 00000000002141ba (blk_remove_plug+0xb2/0xb8)
           R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:3 PM:0 EA:3
Krnl GPRS: 0000000000000001 0000000000000001 0000000022811440 0000000022811798
           000000000027ff4e 0000000000000000 0000000000000000 000000002f00f000
           070000000006a0f4 000000002af70000 000000002af2a800 00000000228d1c00
           0000000022811440 000000000050c708 000000002f02bca8 000000002f02bc80
Krnl Code: 00000000002141b0: b9140022		lgfr	%r2,%r2
           00000000002141b4: 07fe		bcr	15,%r14
           00000000002141b6: a7f40001		brc	15,2141b8
          >00000000002141ba: a7f4ffbe		brc	15,214136
           00000000002141be: 0707		bcr	0,%r7
           00000000002141c0: ebaff0680024	stmg %r10,%r15,104(%r15)
           00000000002141c6: c0d00017c2a9	larl	%r13,50c718
           00000000002141cc: a7f13fc0		tmll	%r15,16320
Call Trace:
([<000000000050e7d8>] C.272.16122+0x88/0x110)
 [<00000000002141ec>] __blk_run_queue+0x2c/0x154
 [<000000000028013a>] fc_remote_port_add+0x85e/0x95c
 [<000000000037596e>] zfcp_scsi_rport_work+0xe6/0x148
 [<000000000006908c>] worker_thread+0x25c/0x318
 [<000000000006f10c>] kthread+0x94/0x9c
 [<000000000001c2b2>] kernel_thread_starter+0x6/0xc
 [<000000000001c2ac>] kernel_thread_starter+0x0/0xc
INFO: lockdep is turned off.
Last Breaking-Event-Address:
 [<00000000002141b6>] blk_remove_plug+0xae/0xb8

The FC pass-through support triggers the WARN_ON(!irqs_disabled()) in
blk_plug_device. Since blk_plug_device requires being called with
disabled interrupts, use spin_lock_irqsave in fc_bsg_goose_queue to
disable the interrupts before calling into the block layer.

Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Acked-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-26 10:29:48 -05:00
Borislav Petkov
37da045067 amd64_edac: misc small cleanups
- cleanup debug calls
- shorten function names
- cleanup error exit paths

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-26 13:06:41 +02:00
Borislav Petkov
30c875cbc1 amd64_edac: fix ecc_enable_override handling
amd64_check_ecc_enabled() returns non-zero status when ECC
checking/correcting is disabled and this fails further loading of the
driver even when 'ecc_enable_override' boot param is used.

Fix that by clearing return status in that case.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-26 13:06:41 +02:00
Borislav Petkov
584fcff428 amd64_edac: check only ECC bit in amd64_determine_edac_cap
Checking whether the machine is using ECC enabled DRAM is done through
testing the DimmEccEn bit in the DRAM Cfg Low register (F2x[1,0]90). Do
that instead of testing all bits from the DimmEccEn upwards.

Also, remove mci->edac_cap assignment and use value returned from
amd64_determine_edac_cap().

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-26 13:06:40 +02:00
Chris Wright
7e25a24229 intel-iommu: fix Identity Mapping to be arch independent
Drop the e820 scanning and use existing function for finding valid
RAM regions to add to 1:1 mapping.

Signed-off-by: Chris Wright <chrisw@redhat.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-26 11:26:27 +01:00
Jiri Kosina
55dba52458 HID: fix memory leak on error path in debug code
If hid_get_report() fails, we forgot to free the already allocated buffer
for debugging messages on error path. Fix that up.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-26 10:50:12 +02:00
Bartlomiej Zolnierkiewicz
5e955245d6 ide: always kill the whole request on error
* Use blk_rq_bytes() instead of obsolete ide_rq_bytes() in ide_kill_rq()
  and ide_floppy_do_request() for failed requests.
  [ bugfix part ]

* Use blk_rq_bytes() instead of obsolete ide_rq_bytes() in ide_do_devset()
  and ide_complete_drive_reset().  Then remove ide_rq_bytes().
  [ cleanup part ]

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-25 23:57:16 -07:00
Bartlomiej Zolnierkiewicz
789547508f ide: fix ide_kill_rq() for special ide-{floppy,tape} driver requests
Such requests should be failed with -EIO (like all other requests
in this function) instead of being completed successfully.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-25 23:57:14 -07:00
Adrian Reber
5ba762c9bb powerpc/rtas: Fix watchdog driver temperature read functionality
Using the RTAS watchdog driver to read out the temperature crashes
on a PXCAB:

Unable to handle kernel paging request for data at address 0xfe347b50
Faulting instruction address: 0xc00000000001af64
Oops: Kernel access of bad area, sig: 11 [#1]

The wrong usage of "(void *)__pa(&temperature)" in rtas_call() is
removed by using the function rtas_get_sensor() which does the
right thing.

Signed-off-by: Adrian Reber <adrian@lisas.de>
Acked-by: Utz Bacher <utz.bacher@de.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-26 16:55:37 +10:00
Sonny Rao
04a85d1234 powerpc/BSR: Fix BSR to allow mmap of small BSR on 64k kernel
On Mon, Nov 17, 2008 at 01:26:13AM -0600, Sonny Rao wrote:
> On Fri, Nov 07, 2008 at 04:28:29PM +1100, Paul Mackerras wrote:
> > Sonny Rao writes:
> >
> > > Fix the BSR driver to allow small BSR devices, which are limited to a
> > > single 4k space, on a 64k page kernel.  Previously the driver would
> > > reject the mmap since the size was smaller than PAGESIZE (or because
> > > the size was greater than the size of the device).  Now, we check for
> > > this case use remap_4k_pfn(). Also, take out code to set vm_flags,
> > > as the remap_pfn functions will do this for us.
> >
> > Thanks.
> >
> > Do we know that the BSR size will always be 4k if it's not a multiple
> > of 64k?  Is it possible that we could get 8k, 16k or 32k or BSRs?
> > If it is possible, what does the user need to be able to do?  Do they
> > just want to map 4k, or might then want to map the whole thing?
>
>
> Hi Paul, I took a look at changing the driver to reject a request for
> mapping more than a single 4k page, however the only indication we get
> of the requested size in the mmap function is the vma size, and this
> is always one page at minimum.  So, it's not possible to determine if
> the user wants one 4k page or more.  As I noted in my first response,
> there is only one case where this is even possible and I don't think
> it is a significant concern.
>
> I did notice that I left out the check to see if the user is trying to
> map more than the device length, so I fixed that.  Here's the revised
> patch.

Alright, I've reworked this now so that if we get one of these cases
where there's a bsr that's > 4k and < 64k on a 64k kernel we'll only
advertise that it is a 4k BSR to userspace.  I think this is the best
solution since user programs are only supposed to look at sysfs to
determine how much can be mapped, and libbsr does this as well.

Please consider for 2.6.31 as a fix, thanks.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-26 14:37:26 +10:00
Sonny Rao
e4031d52c5 powerpc/BSR: add 4096 byte BSR size
Add a 4096 byte BSR size which will be used on new machines.  Also, remove
the warning when we run into an unknown size, as this can spam the kernel
log excessively.

Signed-off-by: Sonny Rao <sonnyrao@us.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-26 14:37:26 +10:00
Benjamin Herrenschmidt
3514141aed powerpc/pmac: Fix DMA ops for MacIO devices
The macio_dev's created to map devices inside the MacIO ASICs
don't have proper dma_ops. This causes crashes on some machines
since the SCSI code calls dma_map_* on our behalf using the
device we hang from.

This fixes it by copying the parent PCI device dma_ops into
the macio_dev when creating it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-26 14:37:25 +10:00
Troy Moure
412af97838 ACPI: video: prevent NULL deref in acpi_get_pci_dev()
ref: http://thread.gmane.org/gmane.linux.kernel/857228/focus=857468

When the ACPI video driver initializes, it does a namespace walk
looking for for supported devices. When we find an appropriate
handle, we walk up the ACPI tree looking for a PCI root bus, and
then walk back down the PCI bus, assuming that every device
inbetween is a P2P bridge.

This assumption is not correct, and is reported broken on at
least:

	Dell Latitude E6400
	ThinkPad X61
	Dell XPS M1330

Add a NULL deref check to prevent boot panics.

Reported-by: Alessandro Suardi <alessandro.suardi@gmail.com>
Signed-off-by: Troy Moure <twmoure@szypr.net>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-26 00:23:42 -04:00
Corentin Chary
3cd530b5aa eeepc-laptop: add rfkill support for the 3G modem in Eee PC 901 Go
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-26 00:23:41 -04:00
Corentin Chary
dbfa3ba90d eeepc-laptop: get the right value for CMSG
CMSG is an ACPI method used to find features available on
an Eee PC. But some features are never repported, even if present.

If the getter of a feature is present, this patch will set
the corresponding bit in cmsg.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-26 00:23:41 -04:00
Corentin Chary
f36509e724 eeepc-laptop: makes get_acpi() returns -ENODEV
If there is there is no getter defined, get_acpi()
will return -ENODEV.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-26 00:23:40 -04:00
Corentin Chary
1ddec2f943 eeepc-laptop: right parent device
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-26 00:23:40 -04:00
Corentin Chary
7de39389d8 eeepc-laptop: rfkill refactoring
Refactor rfkill code, because we'll add another
rfkill for wwan3g later.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-26 00:23:39 -04:00
Joe Perches
19b5328928 eeepc-laptop.c: use pr_fmt and pr_<level>
Convert the unusual printk(EEEPC_<level> uses to
the more standard pr_fmt and pr_<level>(.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-26 00:23:39 -04:00
Corentin Chary
2b121bc262 eeepc-laptop: Register as a pci-hotplug device
The eee contains a logically (but not physically) hotpluggable PCIe slot.
Currently this is handled by adding or removing the PCI device in response
to rfkill events, but if a user has forced pciehp to bind to it (with the
force=1 argument) then both drivers will try to handle the event and
hilarity (in the form of oopses) will ensue. This can be avoided by having
eee-laptop register the slot as a hotplug slot. Only one of pciehp and
eee-laptop will successfully register this, avoiding the problem.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Tested-by: Darren Salt <linux@youmustbejoking.demon.co.uk>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-26 00:23:29 -04:00
Nicolas Reinecke
30767636e5 mdio add missing GPL flag
Add missing GPL flag and description.

mdio: module license 'unspecified' taints kernel.
Disabling lock debugging due to kernel taint

Signed-off-by: Nicolas Reinecke <nr <at> das-labor.org>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-25 20:06:34 -07:00
roel kluin
37c8ae3acf sh_eth: remove redundant test on unsigned
Unsigned boguscnt cannot be less than 0.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-25 20:03:56 -07:00
Ionut Nicu
e2a61fa313 fsl_pq_mdio: Fix fsl_pq_mdio to work with modules
This patch fixes the case when ucc_geth or gianfar are compiled
as modules. Without this patch the call to phy_connect() fails.

Signed-off-by: Ionut Nicu <ionut.nicu@freescale.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-25 20:03:53 -07:00
Linus Torvalds
987fed3bf6 Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (28 commits)
  drm: remove unused #include <linux/version.h>'s
  drm/radeon: fix driver initialization order so radeon kms can be builtin
  drm: Fix shifts which were miscalculated when converting from bitfields.
  drm/radeon: Clear surface registers at initialization time.
  drm/radeon: Don't initialize acceleration related fields of struct fb_info.
  drm/radeon: fix radeon kms framebuffer device
  drm/i915: initialize fence registers to zero when loading GEM
  drm/i915: Fix HDMI regression introduced in new chipset support
  drm/i915: fix LFP data fetch
  drm/i915: set TV detection mode when tv is already connected
  drm/i915: Catch up to obj_priv->page_list rename in disabled debug code.
  drm/i915: Fix size_t handling in off-by-default debug printfs
  drm/i915: Don't change the blank/sync width when calculating scaled modes
  drm/i915: Add support for changing LVDS panel fitting using an output property.
  drm/i915: correct suspend/resume ordering
  drm/i915: Add missing dependency on Intel AGP support.
  drm/i915: Generate 2MHz clock for display port aux channel I/O. Retry I/O.
  drm/i915: Clarify error returns from display port aux channel I/O
  drm/i915: Add CLKCFG register definition
  drm/i915: Split array of DAC limits into separate structures.
  ...
2009-06-25 17:04:37 -07:00
Thadeu Lima de Souza Cascardo
f4fa446883 usb_serial: Fix oops when unexisting usb serial device is opened.
This commit 335f8514f2 has stopped
properly checking if there is any usb serial associated with the tty in
the close function. It happens the close function is called by releasing
the terminal right after opening the device fails.

As an example, open fails with a non-existing device, when probe has
never been called, because the device has never been plugged. This is
common in systems with static modules and no udev.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-25 11:24:26 -07:00
Thadeu Lima de Souza Cascardo
922b13565b acm: Fix oops when closing ACM tty device right after open has failed.
This commit 10077d4a66 has stopped
checking if there was a valid acm device associated to the tty, which is
not true right after open fails and tty subsystem tries to close the
device.

As an example, open fails with a non-existing device, when probe has
never been called, because the device has never been plugged. This is
common in systems with static modules and no udev.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-25 11:24:26 -07:00
Thadeu Lima de Souza Cascardo
42dd2aa649 acm: Return ENODEV instead of EINVAL when trying to open ACM device.
This is required, otherwise a user will get a EINVAL while opening a
non-existing device, instead of ENODEV.

This is what I get with this patch applied now instead of an "Invalid
argument".

  cascardo@vespa:~$ cat /dev/ttyACM0
  cat: /dev/ttyACM0: No such device
  cascardo@vespa:~$

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-25 11:24:26 -07:00
Linus Torvalds
a37f6b84c4 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  ide cs5520: Initialize second port's interrupt number.
  ide: improve handling of Power Management requests
  ide: add QUANTUM FIREBALLct20 30 with firmware APL.090 to ivb_list[]
  ide: relax DMA info validity checking
  ide-cd: Improve "weird block size" error message
  ide-cd: Don't warn on bogus block size unless it actually matters.
  ide: fix handling of unexpected IRQs vs request_irq()
2009-06-25 11:23:37 -07:00
Ingo Molnar
47749b14e5 i2c: fix build bug in i2c-designware.c
This build error triggers on x86:

 drivers/built-in.o: In function `i2c_dw_init':
 i2c-designware.c:(.text+0x4e37ca): undefined reference to `clk_get_rate'
 drivers/built-in.o: In function `dw_i2c_probe':
 i2c-designware.c:(.devinit.text+0x51f5e): undefined reference to `clk_get'
 i2c-designware.c:(.devinit.text+0x51f76): undefined reference to `clk_enable'
 i2c-designware.c:(.devinit.text+0x520ff): undefined reference to `clk_disable'
 i2c-designware.c:(.devinit.text+0x52108): undefined reference to `clk_put'

Because this new driver uses the clk_*() facilities which is an
ARM-only thing currently.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-25 11:22:12 -07:00
Stefan Richter
6fdc037094 firewire: core: do not DMA-map stack addresses
The DMA mapping API cannot map on-stack addresses, as explained in
Documentation/DMA-mapping.txt.  Convert the two cases of on-stack packet
payload buffers in firewire-core (payload of lock requests in the bus
manager work and in iso resource management) to slab-allocated memory.

There are a number on-stack buffers for quadlet write or quadlet read
requests in firewire-core and firewire-sbp2.  These are harmless; they
are copied to/ from card driver internal DMA buffers since quadlet
payloads are inlined with packet headers.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-06-25 19:42:36 +02:00
James Bottomley
d3a263a816 [SCSI] zalon: fix oops on attach failure
I recently discovered on my zalon that if the attachment fails because
of a bus misconfiguration (I scrapped my HVD array, so the card is now
unterminated) then the system oopses.  The reason is that if
ncr_attach() returns NULL (signalling failure) that NULL is passed by
the goto failed straight into ncr_detach() which oopses.

The fix is just to return -ENODEV in this case.

Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-25 11:37:23 -05:00
Bjorn Helgaas
dcf52fb71d ACPI: remove unused acpi_device_ops .stop method
No drivers use the .stop method, so remove it.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Reviewed-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-25 12:16:33 -04:00
Bjorn Helgaas
cf745ec7a1 ACPI: EC: remove .stop() method
This patch folds the .stop() method into .remove().

acpi_ec_stop() is only called via acpi_device_probe() and
acpi_device_remove(), and in both cases it is called immediately before
acpi_ec_remove(), so there's no need to have it be a separate method.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Reviewed-by: Alex Chiang <achiang@hp.com>
CC: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-25 12:16:33 -04:00
Bjorn Helgaas
d02be04707 ACPI: EC: remove .start() method
This patch folds the .start() method into .add().

acpi_ec_start() is always called immediately after acpi_ec_add(),
so there's no need to have it be a separate method.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Reviewed-by: Alex Chiang <achiang@hp.com>
CC: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-25 12:16:33 -04:00
Bjorn Helgaas
5efc547618 ACPI: EC: move acpi_ec_start() after acpi_ec_add()
This patch rearranges ec_install_handlers() and acpi_ec_start() so
acpi_ec_start() ends up just after acpi_ec_add().  A subsequent patch
will merge them.

Code movement only; no functional change.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
CC: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-25 12:16:33 -04:00
Bjorn Helgaas
80f20fef6a ACPI: memory hotplug: remove .start() method
This patch folds the .start() method into .add().

The .start() method is called in two paths: boot-time device enumeration
and run-time node addition, currently via container_device_add().  In both
cases, .start() is called immediately after .add(), so there's no reason
to make them separate methods.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Reviewed-by: Alex Chiang <achiang@hp.com>
CC: Yasunori Goto <y-goto@jp.fujitsu.com>
CC: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-25 12:16:33 -04:00
Bjorn Helgaas
970b04929a ACPI: processor: remove .start() method
This patch folds the .start() method into .add().

acpi_processor_start() is always called immediately after
acpi_processor_add(), so there's really no point in having them be
separate methods.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Reviewed-by: Alex Chiang <achiang@hp.com>
CC: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
CC: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-25 12:16:33 -04:00
Bjorn Helgaas
ddcd62d89e ACPI: processor: move acpi_processor_start() after acpi_processor_add()
Move acpi_processor_start() to just after acpi_processor_add().
A subsequent patch will merge them.

Code movement only; no functional change.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
CC: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
CC: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-25 12:16:32 -04:00
Bjorn Helgaas
d4e0526184 ACPI: processor: clean up in acpi_processor_start() error exits
We used to leave crud around if things failed in acpi_processor_start().
This patch cleans up as much as we can before returning.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Reviewed-by: Alex Chiang <achiang@hp.com>
CC: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
CC: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-25 12:16:32 -04:00
Bjorn Helgaas
c1815e0740 ACPI: processor: remove KOBJ_ONLINE/KOBJ_OFFLINE events
This patch removes the KOBJ_ONLINE/KOBJ_OFFLINE events the driver used
to generate for CPU hotplug.  As far as I know, nobody consumes these.
The driver core still generates KOBJ_ADD and KOBJ_REMOVE, of course.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
CC: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
CC: Zhao Yakui <yakui.zhao@intel.com>
CC: Matthew Garrett <mjg@redhat.com>
CC: Thomas Renninger <trenn@suse.de>
CC: Dave Jones <davej@codemonkey.org.uk>
CC: Kay Sievers <kay.sievers@vrfy.org>
CC: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-06-25 12:16:32 -04:00
Abhijeet Joglekar
e3f47cc74b [SCSI] fnic: use DMA_BIT_MASK(nn) instead of deprecated DMA_nnBIT_MASK
Robert Love reported warning while building fnic_main.c:
drivers/scsi/fnic/fnic_main.c:478: warning: `DMA_nnBIT_MASK' is deprecated.

Replaced use of DMA_nnBIT_MASK by DMA_BIT_MASK(nn)

Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-25 11:08:53 -05:00
Roel Kluin
87a2d34b03 [SCSI] fnic: remove redundant BUG_ONs and fix checks on unsigned
The shost sg tablesize is set to FNIC_MAX_SG_DESC_CNT and fnic uses
scsi_dma_map, so both BUG_ONs can be removed.

scsi_dma_map may return -ENOMEM, sg_count should be int to catch that.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-25 11:08:23 -05:00
Brian King
e08afeb7e6 [SCSI] ibmvscsi: Fix module load hang
Fixes a regression seen in the ibmvscsi driver when using the VSCSI
server in SLES 9 and SLES 10. The VSCSI server in these releases
has a bug in it in which it does not send responses to unknown MADs.
Check the OS Type field in the adapter info response and do not send
these unsupported commands when talking to an older server.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-25 11:06:41 -05:00
Brandon Philips
d8146bb23e atl1*: add device_set_wakeup_enable to atl1*_set_wol
Tell PCI core that atl1* device can wakeup the system when WOL is
enabled by calling device_set_wakeup_enable.

Joerg noted that his atl1e device WOL fine after enabling it with
ethtool and changing /sys/class/net/eth0/device/power/wakeup to enabled
Tested on atl1e: https://bugzilla.novell.com/show_bug.cgi?id=493214

Tested by: Joerg Reuter <jreuter@novell.com>
Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-25 02:58:17 -07:00
David S. Miller
11687a1099 Revert "veth: prevent oops caused by netdev destructor"
This reverts commit ae0e8e8220.

This change had two problems:

1) Since it frees the stats in the drivers' close method, we
   can OOPS in the transmit routine.

2) stats are no longer remembered across ifdown/ifup which
   disagrees with how every other device operates.

Thanks to analysis and test patch from Serge E. Hallyn
and initial OOPS report by Sachin Sant.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-25 02:45:42 -07:00
Thadeu Lima de Souza Cascardo
ae27a7ab2c mtd: atmel_nand: Fix typo s/parititions/partitions/
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-25 08:18:36 +01:00