Commit graph

93,853 commits

Author SHA1 Message Date
Jiri Slaby
97e87f8ebe tty: cyclades, plx9060 casts cleanup
Remove ugly all-over-the-code casts of ctl_addr to 9060 space.
Add an union to the cyclades_card structure, which contains
a pointer to both 9050 and 9060 spaces.

The 9050 space layout is unknown, so let it still as a void
__iomem pointer.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:50:57 -07:00
Paul Fulghum
5ba5a5d212 tty: synclink_gt add receive pio mode
Add receive programmed IO mode to reduce receive latency
when using low data rates. The receive FIFO trigger
level of 128 bytes used in DMA mode creates excessive latency
when operating at low data rates. PIO mode is selected when user
application requests data in blocks of less than 128 bytes.

Signed-off-by: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:50:57 -07:00
Alan Cox
739e0285cb tty: Update cdc_acm
The CDC ACM driver uses the tty layer correctly so needs conversion. Start by
adding and initializing the port structures.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:50:57 -07:00
Alan Cox
335f8514f2 tty: Bring the usb tty port structure into more use
This allows us to clean stuff up, but is probably also going to cause
some app breakage with buggy apps as we now implement proper POSIX behaviour
for USB ports matching all the other ports. This does also mean other apps
that break on USB will now work properly.

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:50:56 -07:00
Alan Cox
1ec739be75 tty: Implement a drain delay in the tty port
We need this for devices that cannot flush and wait, but which do not order
data and modem events. Without it we will hang up before all the data
clears the hardware. Needed for the USB changes.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:50:56 -07:00
Alan Cox
fcc8ac1825 tty: Add carrier processing on close to the tty_port core
Some drivers implement this internally, others miss it out. Push the
behaviour into the core code as that way everyone will do it consistently.

Update the dtr rts method to raise or lower depending upon flags. Having a
single method in this style fits most of the implementations more cleanly than
two funtions.

We need this in place before we tackle the USB side

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:50:56 -07:00
Jiri Slaby
65a29f60e1 tty: cyclades, remove spurious check in ISR
No need to check if dev_id is NULL, it never is.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:50:56 -07:00
Jiri Slaby
eca1b592d6 tty: cyclades, don't kill FW
Don't reset the PLX chip after FW load, which effectively kills
the FW, so that user had to boot manually.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:50:56 -07:00
Jiri Slaby
ace08c3c44 tty:cyclades, load firmware even on Ze
Ze needs firmware to be loaded as well as Zo. Move cyz_load_fw one
level upper to achieve that.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-11 08:50:56 -07:00
Linus Walleij
dc890c2dcd [ARM] 5544/1: Trust PrimeCell resource sizes
I found the PrimeCell/AMBA Bus drivers distrusting the resource
passed in as part of the struct amba_device abstraction. This
patch removes all hard coded resource sizes found in the PrimeCell
drivers and move the responsibility of this definition back to
the platform/board device definition, which already exist and
appear to be correct for all in-tree users of these drivers.
We do this using the resource_size() inline function which was
also replicated in the only driver using the resource size, so
that has been changed too. The KMI_SIZE was left in kmi.h in case
someone likes it. Test-compiled against Versatile and Integrator
defconfigs, seems to work but I don't posess these boards and
cannot test them.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-11 15:36:56 +01:00
Robert Richter
fecfe6320b oprofile: remove obselete include headers
This became obsolete with this commit:

 6dad828 oprofile: port to the new ring_buffer

Signed-off-by: Robert Richter <robert.richter@amd.com>
2009-06-11 16:10:12 +02:00
David S. Miller
bb400801c2 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-next-2.6 2009-06-11 05:47:43 -07:00
Stephen Hemminger
130aa61a77 bonding: fix multiple module load problem
Some users still load bond module multiple times to create bonding
devices.  This accidentally was broken by a later patch about
the time sysfs was fixed.  According to Jay, it was broken
by:
   commit b8a9787edd
   Author: Jay Vosburgh <fubar@us.ibm.com>
   Date:   Fri Jun 13 18:12:04 2008 -0700

     bonding: Allow setting max_bonds to zero

Note: sysfs and procfs still produce WARN() messages when this is done
so the sysfs method is the recommended API.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11 05:46:04 -07:00
Cindy H Kao
0bcfc5ef01 wimax/i2400m: use -EL3RST to indicate device reset instead of -ERESTARTSYS
When the i2400m device resets, the driver code will force some
functions to return a -ERESTARTSYS error code, which can is used by
the caller to determine which recovery actions to take.

However, in certain situations the only thing that can be done is to
bubble up said error code to user space, for handling.

However, -ERESTARSYS was a poor choice, as it is supposed to be used
by the kernel only.

As such, replace -ERESTARTSYS with -EL3RST; as well, in
i2400m_msg_to_dev(), when the device is in boot mode (following a
recent reset), return -EL3RST instead of -ENODEV (meaning the device
is in bootrom mode after a reset, not that the device was
disconnected, and thus, normal commands cannot be executed).

Signed-off-by: Cindy H Kao <cindy.h.kao@intel.com>
2009-06-11 03:30:26 -07:00
Cindy H Kao
8b5b30ee7d wimax/i2400m: when bootstrap fails, reinitialize the bootrom
When a device reset happens during firmware load [in
i2400m_dev_bootstrap()], __i2400m_dev_start() will retry a number of
times. However, for those retries to be able to accomplish anything,
the device's bootrom has to be reinitialized.

Thus, on the retry path, pass the I2400M_MAC_REINIT to the firmware
load code.

Signed-off-by: Cindy H Kao <cindy.h.kao@intel.com>
2009-06-11 03:30:26 -07:00
Inaky Perez-Gonzalez
16820c166d wimax/i2400m/sdio: Move all the RX code to a unified, IRQ based receive routine
The current SDIO code was working in polling mode for boot-mode
(firmware load) mode. This was causing issues on some hardware.

Moved all the RX code to use a unified IRQ handler that based on the
type of data the device is sending can discriminate and decide which
is the right destination.

As well, all the reads from the device are made to be at least the
block size (256); the driver will ignore the rest when not needed.

Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-06-11 03:30:25 -07:00
Inaky Perez-Gonzalez
6e053d6c79 wimax/i2400m: don't reset device when bootrom init retries are exceeded
When i2400m_bootrom_init() fails to put the device into a state of
being ready to accept firmware, the driver was currently trying to
reset it if it failed to do so. This is not too useful; as part of
trying to put the device in the right state a few resets have already
been tried.

At this point, things are probably fried out and an extra reset might
do more harm than good (for example causing reseting of other
functions in the same composite device).

So it is left up to the callers to determine the error path to take
(at the end this is always i2400m_setup(), who depending on how many
retries are left, might give up on the device).

From a fix by Cindy H. Kao.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-06-11 03:30:25 -07:00
Dirk Brandewie
1c0b2dd757 wimax/i2400m/sdio: Add device specific poke table.
Add a poke table for the SDIO device (as it is different than USB).

Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
2009-06-11 03:30:24 -07:00
Dirk Brandewie
7308a0c239 wimax/i2400m: move boot time poke table out of common driver
This change moves the table of "pokes" performed on the device at boot
time to the bus specific portion of the driver.

Different models of the i2400m device supported by this driver require
different poke tables, thus having a single table that works for all
is impossible. For that, the table is moved to the bus-specific
driver, who can decide which table to use based on the specifics of
the device and point the generic driver to it.

Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
2009-06-11 03:30:24 -07:00
Inaky Perez-Gonzalez
ecddfd5ed7 wimax/i2400m: Allow bus-specific driver to specify retry count
The code that sets up the i2400m (firmware load and general driver
setup after it) includes a couple of retry loops.

The SDIO device sometimes can get in more complicated corners than the
USB one (due to its interaction with other SDIO functions), that
require trying a few more times.

To solve that, without having a failing USB device taking longer to be
considered dead, allow the retry counts to be specified by the
bus-specific driver, which the general driver takes as a parameter.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-06-11 03:30:23 -07:00
Inaky Perez-Gonzalez
b4013f91cd wimax/i2400m: if a device reboot happens during probe, handle it
When a device reboot happens when we are under probe, with init_mutex
taken, make sure we can recover. Have dev_reset_handle set boot mode
and i2400m_msg_to_dev() will see it and fail gracefully instead of
timing out.

Found and diagnosed by Cindy H. Kao.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-06-11 03:30:23 -07:00
Inaky Perez-Gonzalez
59063afa0a wimax/i2400m: fix oops when the TX FIFO fills up due to a missing check
When the TX FIFO filled up and i2400m_tx_new() failed to allocate a
new TX message header, a missing check for said condition was causing a
kernel oops when trying to dereference a NULL i2400m->tx_msg pointer.

Found and diagnosed by Cindy H. Kao.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-06-11 03:30:22 -07:00
Inaky Perez-Gonzalez
b4bd07e3b1 wimax/i2400m: don't reset device on i2400m_dev_shutdown()
i2400m_dev_shutdown() tried to reset the device to put it in a known
state before shutting down.

But that turned out to be pointless. We reach this case in two paths:

 1 - when the device resets, to clean up state
 2 - when the driver is unloaded, for the same

however, in both cases it is pointless; in (1) the device is already
reset, why do it again? in (2) we can't -- the USB stack, for example,
doesn't allow communicating with the device when the driver is being
unbound and if the device is disconnected, the device is gone already.

So just remove it. Leave the function as a placeholder for future
cleanups that will be done from data allocated by the driver during
device operation.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-06-11 03:30:22 -07:00
Inaky Perez-Gonzalez
2971a5bac8 wimax/i2400m: fix panic due to missed corner cases on tail_room calculation
i2400m_tx_skip_tail() needs to handle the special case of being called
when the tail room that is left over in the FIFO is zero.

This happens when a TX message header was opened at the very end of
the FIFO (without payloads). The i2400m_tx_close() code already marked
said TX message (header) to be skipped and this function should be
doing nothing.

It is called anyway because it is part of a common "corner case" path
handling which takes care of more cases than only this one.

The tail room computation was also improved to take care of the case
when tx_in is at the end of the buffer boundary; tail_room has to be
modded (%) to the buffer size. To do that in a single well-documented
place, __i2400m_tx_tail_room() is introduced and used.

Treat i2400m->tx_in == 0 as a corner case and handle it accordingly.

Found and diagnosed by Cindy H. Kao.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-06-11 03:30:21 -07:00
Inaky Perez-Gonzalez
c56affafdd wimax/i2400m: fix panic/warnings caused by missed check on empty TX message
In some situations, when a new TX message header is started, there
might be no space for data payloads. In this case the message is left
with zero payloads and the i2400m_tx_close() function has just to mark
it as "to skip". If it tries to go ahead it will overwrite things
because there is no space to add padding as defined by the
bus-specific layer. This can cause buffer overruns and in some stress
cases, panics.

Found and diagnosed by Cindy H. Kao.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-06-11 03:30:21 -07:00
Inaky Perez-Gonzalez
8593a1967f wimax/i2400m: rename misleading I2400M_PL_PAD to I2400M_PL_ALIGN
The constant is being use as an alignment factor, not as a padding
factor; made reading/reviewing the code quite confusing.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-06-11 03:30:20 -07:00
Dirk Brandewie
10b1de6b77 wimax/i2400m/sdio: Implement I2400M_RT_BUS reset type
This reset type causes the WiMAX function to be disabled and
re-enabled, which will force the WiMAX device to reset and enter boot
mode.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
2009-06-11 03:30:20 -07:00
Dirk Brandewie
ead6823991 wimax/i2400m: Change d_printf() level for secure boot messages
Changing debug level of print out to support validation engineers
getting the messages they need.

Signed-off-by:  <dirk.j.brandewie@intel.com>
2009-06-11 03:30:19 -07:00
Inaky Perez-Gonzalez
16eafba8de wimax/i2400m: i2400m_schedule_work() doesn't need i2400m->work_queue
By mistake, the BUG_ON() check was left in there and it will fail when
called if i2400m->work_queue is still not setup.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-06-11 03:30:19 -07:00
Inaky Perez-Gonzalez
e9a6b45be5 wimax/i2400m: i2400m's work queue should be initialized before RX support
RX support is the only user of the work-queue, to process
reports/notifications from the device. Thus, it needs the work queue
to be initialized first.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-06-11 03:30:18 -07:00
Inaky Perez-Gonzalez
fff1068559 wimax/i2400m: don't call netif_start_queue() in _tx_msg_sent()
Reported and fixed by Cindy H Kao.

When the device is stopped __i2400m_dev_stop() stops the network
queue.

However, when this is done in the middle of heavy network operation,
when the bus-specific subdriver is still wrapping up and it reports a
sent TX transaction with _tx_msg_sent() right after the device was
stopped, the queue was being started again, which was causing a stream
of oopsen and finally a panic.

In any case, said call has no place there. It's a left over from an
early implementation that was discarded later on.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-06-11 03:30:18 -07:00
Inaky Perez-Gonzalez
fb10167478 wimax/i2400m: introduce module parameter to disable entering power save
The i2400m driver waits for the device to report being ready for
entering power save before asking it to do so. This module parameter
allows control of said operation; if disabled, the driver won't ask
the device to enter power save mode.

This is useful in setups where power saving is not so important or
when the overhead imposed by network reentry after power save is not
acceptable; by combining this with parameter 'idle_mode_disabled', the
driver will always maintain both the connection and the device in
active state.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-06-11 03:30:17 -07:00
Figo.zhang
f2333a014c netxen: No need to check vfree() pointer.
vfree() does its own 'NULL' check, so no need for check before
calling it.

Signed-off-by: Figo.zhang <figo1802@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11 02:49:10 -07:00
Sathya Perla
934037bc2e be2net: Fix be_tx_q_clean() being called on freed queues
In the tx queue destroy path, be_tx_q_clean() is currently called after the tx queues are freed; it must be called before.

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11 02:47:19 -07:00
Sathya Perla
a7a0ef31de be2net: Fix early reset of rx-completion
be_rx_compl_get() must not reset(via the valid word) the rx_compl as the rx_compl is not processed yet; it must be reset after it is processed.

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11 02:47:18 -07:00
Sathya Perla
76fbb42919 be2net: Fix rx stats updation in non-lro path
rx stats are not getting updated when an rx_compl with only one frag is rcvd in non-lro path.

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11 02:47:16 -07:00
Sathya Perla
6811086899 be2net: fix netdev stats rx_errors and rx_dropped
Fix netdev stat rx_errors to cover length related errors and checksum errors and rx_dropped to the pkts dropped due to lack of buffers

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11 02:47:16 -07:00
Sathya Perla
b305be78a0 be2net: Use cancel_delayed_work_sync instead of cancel_delayed_work()
Use cancel_delayed_work_sycn instead of cancel_delayed_work() to reliably kill be_worker() as it rearms itself.

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11 02:47:15 -07:00
Figo.zhang
c0feed87fe tehuti: No need check vfree() pointer.
vfree() does its own 'NULL' check, so no need for check before
calling it.

Signed-off-by: Figo.zhang <figo1802@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11 02:47:14 -07:00
Figo.zhang
50d36a93dc vxge: No need for check vfree() pointer.
vfree() does its own 'NULL' check, so no need for check before
calling it.

Signed-off-by: Figo.zhang <figo1802@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11 02:47:14 -07:00
Divy Le Ray
74b793e1ef cxgb3: remove __GFP_NOFAIL usage
Pre-allocate a skb at init time to be used for control messages to the HW
if skb allocation fails.

Tolerate failures to send messages initializing some memories at the cost of
parity error detection for these memories.
Retry sending connection id release messages if both alloc_skb(GFP_ATOMIC)
and alloc_skb(GFP_KERNEL) fail.
Do not bring the interface up if messages binding queue set to port fail to
be sent.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11 02:47:13 -07:00
Eric Dumazet
87433bfc75 r8169: use dev_kfree_skb() instead of dev_kfree_skb_irq()
rtl8169_tx_interrupt() is used from NAPI context, it can
directly free skbs. dev_kfree_skb_irq() is a leftover from
pre-NAPI times of this driver.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11 02:47:12 -07:00
Ben Hutchings
e762cd70ef sfc: Expose 100/1000BASE-T MDI-X status via ethtool
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11 02:47:11 -07:00
Ben Hutchings
d005ba6cc8 mdio: Expose 10GBASE-T MDI-X status via ethtool
This is available in a standard MDIO register in 10GBASE-T PHYs.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11 02:47:10 -07:00
Ron Mercer
b8facca01b qlge: Allow RX buf rings to be > than 4096 bytes.
RX buffer rings can be comprised of non-contiguous fixed
size chunks of memory. The ring is given to the hardware
as a pointer to a location that stores the location of
the queue.  If the queue is greater than 4096 bytes then
the hardware gets a list of said pointers.
This patch addes the necessary logic to generate the list if
the queue size exceeds 4096.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11 02:37:05 -07:00
Ron Mercer
88c55e3cbd qlge: Relax alignment on TX harware queue.
The alignment was on size of queue boundary, but the hardware
only requires 4-byte alignment.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11 02:37:04 -07:00
Roel Kluin
0ed586d075 atl1c: WAKE_MCAST tested twice, not WAKE_UCAST
The WAKE_MCAST bit is tested twice, the first should be WAKE_UCAST.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Jie Yang <jie.yang@atheros.com>
Cc: Jay Cliburn <jcliburn@gmail.com>
Cc: Chris Snook <csnook@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11 02:32:41 -07:00
Risto Suominen
b77e522884 de2104x: support for systems lacking cache coherence
Add a configurable Descriptor Skip Length for systems that lack cache
coherence.

(akpm: I think this should be done as a module parameter, not a
compile-tinme option)

Signed-off-by: Risto Suominen <Risto.Suominen@gmail.com>
Cc: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11 02:32:41 -07:00
sg.tweak@gmail.com
ef5c89967d drivers/net/macvlan.c: fix cloning of tagged VLAN interfaces
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13348

akpm: the reporter disappeared, so I typed it in again.

It is not possible to make clone of tagged VLAN interface to be used as
mac-based vlan interfave.

How reproducible:
Use any 802.1q tagged vlan interface, e.g. eth2.700 and clone it:

  ip link add link eth2.700 address 00:04:75:cb:38:09 macvlan0 type macvlan
  ip link set dev macvlan0 up
  ip addr add 10.195.1.1/24 dev macvlan0

So far, so good. Now try to ping anything via macvlan0:

  ping 10.195.1.2

Actual results:
For every attempted packet tx kernel writes to console:

------------[ cut here ]------------
WARNING: at net/8021q/vlan_dev.c:254 vlan_dev_hard_header+0x36/0x126 [8021q]()
Hardware name: M22ES
Modules linked in: arptable_filter arp_tables bridge veth macvlan arc4 ecb
ppp_mppe ppp_async crc_ccitt ppp_generic slhc autofs4 sunrpc 8021q garp stp
ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack xt_tcpudp
x_tables dm_mirror dm_region_hash dm_log dm_multipath dm_mod sbs sbshc lp
floppy snd_intel8x0 joydev snd_seq_dummy snd_intel8x0m snd_ac97_codec
ide_cd_mod ac97_bus snd_seq_oss cdrom snd_seq_midi_event serio_raw snd_seq
snd_seq_device snd_pcm_oss snd_mixer_oss parport_pc snd_pcm parport battery
8139cp snd_timer i2c_sis96x ac button snd rtc_cmos rtc_core 8139too soundcore
rtc_lib mii i2c_core pcspkr snd_page_alloc pata_sis libata sd_mod scsi_mod ext3
jbd ehci_hcd ohci_hcd uhci_hcd [last unloaded: ip_tables]
Pid: 0, comm: swapper Tainted: G        W  2.6.29.3 #1
Call Trace:
 [<c0425f48>] warn_slowpath+0x60/0x9f
 [<c0425f6f>] warn_slowpath+0x87/0x9f
 [<dffb850d>] vlan_dev_hard_header+0x0/0x126 [8021q]
 [<dffb8543>] vlan_dev_hard_header+0x36/0x126 [8021q]
 [<dffb850d>] vlan_dev_hard_header+0x0/0x126 [8021q]
 [<df83155d>] macvlan_hard_header+0x3c/0x47 [macvlan]
 [<df831521>] macvlan_hard_header+0x0/0x47 [macvlan]
 [<c062bf3f>] arp_create+0xef/0x1ff
 [<c062c08c>] arp_send+0x3d/0x54
 [<c062c916>] arp_solicit+0x16c/0x177
 [<c05fadd2>] neigh_timer_handler+0x227/0x269
 [<c05fabab>] neigh_timer_handler+0x0/0x269
 [<c042ce4d>] run_timer_softirq+0xf0/0x141
 [<c0429e5a>] __do_softirq+0x76/0xf8
 [<c0429de4>] __do_softirq+0x0/0xf8
 <IRQ>  [<c044fb67>] handle_level_irq+0x0/0xad
 [<c0429db7>] irq_exit+0x35/0x62
 [<c04046bb>] do_IRQ+0xdf/0xf4
 [<c04035a7>] common_interrupt+0x27/0x2c
 [<c04079c5>] default_idle+0x2a/0x3d
 [<c0401bb6>] cpu_idle+0x57/0x70

Macvlan driver always uses standard ethernet header length for all types
of interface to which it is linked.  This patch fixes this problem.

Reported-by: <sg.tweak@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11 02:32:39 -07:00
Andreas Mohr
720017623a e100: add non-MII PHY support
Restore support for cards with MII-lacking PHYs as compared to removed
pre-2.6.29 eepro100 driver: use full low-level MII I/O access abstraction
by providing clean PHY-specific mdio_ctrl() functions for either standard
MII-compliant cards, slightly special ones or non-MII PHY ones.

We now have another netdev_priv member for mdio_ctrl(), thus we have some
array indirection, but we save some additional opcodes for specific
phy_82552_v handling in the common case.

[akpm@linux-foundation.org: cleanups]
Signed-off-by: Andreas Mohr <andi@lisas.de>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Bruce Allan <bruce.w.allan@intel.com>
Cc: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
Cc: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-11 02:32:39 -07:00