Commit graph

93,853 commits

Author SHA1 Message Date
Ron Mercer
fc1f9ea51d qlge: Add support for lost firmware events.
When the firmware is issuing events to the driver the events
must be removed from the queue.  If the queue overflows, the
firmware will build and special event that captures those that
are lost.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03 23:50:49 -08:00
Ron Mercer
bb6676705e qlge: Save status from firmware crash (system err).
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03 23:50:49 -08:00
Ron Mercer
7c92191cb4 qlge: Improve handling for firmware init failure.
This event will arrive at boot time or after an
MPI processor reset if the firmware failed to initialize.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03 23:50:48 -08:00
Ron Mercer
f56b54f542 qlge: Clean up event handler for firmware init.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03 23:50:48 -08:00
Ron Mercer
2ee1e272d1 qlge: Add worker-handler for firmware events.
This worker and it's supporting routines are used for
IDC 'inter-device-communication' events that require
an ACK mailbox command be sent to allow completion
of the request. These requests are originated by
another function wanting to change some common
port paramters. Typical example would be:

1) Change max TX/RX frame size allowed.
2) Change pause parameters.
3) Change loopback mode.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03 23:50:47 -08:00
Ron Mercer
5700abe947 qlge: Clean up link up processing.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03 23:50:46 -08:00
Ron Mercer
11d9fe68ac qlge: Clean up link down processing.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03 23:50:46 -08:00
Ron Mercer
eae6b58fb2 qlge: Add firmware support for insert/remove SFP.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03 23:50:45 -08:00
Peter Korsgaard
a1a69c8db7 dm9601: new vendor/product IDs
Add vendor/product IDs for new no name dm9601 compatible usb ethernet
adaptors.

Reported-by: Eric Lauriault <eric@linux.ca>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03 23:48:16 -08:00
Eric Biederman
38d408152a veth: Allow setting the L3 MTU
The limitation to only 1500 byte mtu's limits the utility of the veth
device for testing routing.  So implement implement a configurable
MTU.

For consistency I drop packets on the receive side when they are
larger than the MTU.  I count those drops.  And I allow
a little padding for vlan headers.

I also test the mtu when a new device is created with netlink
because that path currently bypasses the current mtu setting
code.

Signed-off-by: Eric Biederman <ebiederm@aristanetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03 23:36:04 -08:00
Ingo Molnar
91d75e209b Merge branch 'x86/core' into core/percpu 2009-03-04 02:29:19 +01:00
Ingo Molnar
8b0e5860cb Merge branches 'x86/apic', 'x86/cpu', 'x86/fixmap', 'x86/mm', 'x86/sched', 'x86/setup-lzma', 'x86/signal' and 'x86/urgent' into x86/core 2009-03-04 02:22:31 +01:00
Linus Torvalds
9c1a774705 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: ixp4xx - Fix qmgr_request_queue build failure
  crypto: api - Fix module load deadlock with fallback algorithms
2009-03-03 17:05:08 -08:00
Krzysztof Hałasa
1777f1a978 crypto: ixp4xx - Fix qmgr_request_queue build failure
There is another user of IXP4xx queue manager, fix it.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-03-04 08:01:22 +08:00
Jack Morgenstein
6b708b3dde IB/sa_query: Fix AH leak due to update_sm_ah() race
Our testing uncovered a race condition in ib_sa_event():

	spin_lock_irqsave(&port->ah_lock, flags);
	if (port->sm_ah)
		kref_put(&port->sm_ah->ref, free_sm_ah);
	port->sm_ah = NULL;
	spin_unlock_irqrestore(&port->ah_lock, flags);

	schedule_work(&sa_dev->port[event->element.port_num -
				    sa_dev->start_port].update_task);

If two events occur back-to-back (e.g., client-reregister and LID
change), both may pass the spinlock-protected code above before the
scheduled work updates the port->sm_ah handle.  Then if the scheduled
work ends up running twice, the second operation will then find a
non-NULL port->sm_ah, and will simply overwrite it in update_sm_ah --
resulting in an AH leak.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-03 14:30:01 -08:00
Ralph Campbell
4780c1953f IB/mad: Fix ib_post_send_mad() returning 0 with no generate send comp
If ib_post_send_mad() returns 0, the API guarantees that there will be
a callback to send_buf->mad_agent->send_handler() so that the sender
can call ib_free_send_mad().  Otherwise, the ib_mad_send_buf will be
leaked and the mad_agent reference count will never go to zero and the
IB device module cannot be unloaded.  The above can happen without
this patch if process_mad() returns (IB_MAD_RESULT_SUCCESS |
IB_MAD_RESULT_CONSUMED).

If process_mad() returns IB_MAD_RESULT_SUCCESS and there is no agent
registered to receive the mad being sent, handle_outgoing_dr_smp()
returns zero which causes a MAD packet which is at the end of the
directed route to be incorrectly sent on the wire but doesn't cause a
hang since the HCA generates a send completion.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-03 14:22:17 -08:00
Linus Torvalds
f41bf2ab99 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] fix lots of ARM __devexit sillyness
  [ARM] 5417/1: Set the correct cacheid for ARMv6 CPUs with ARMv7 style MMU
  [ARM] 5416/1: Use unused address in v6_early_abort
  [ARM] 5411/1: S3C64XX: Fix EINT unmask
  [ARM] at91: fix for Atmel AT91 powersaving
  [ARM] RiscPC: Fix etherh oops
2009-03-03 14:12:41 -08:00
Russell King
bdf602bd73 [ARM] fix lots of ARM __devexit sillyness
`iop_adma_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o
`mv_xor_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o
`mv64xxx_i2c_unmap_regs' referenced in section `.devinit.text' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o
`mv64xxx_i2c_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o
`orion_nand_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o
`pxafb_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o

Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-03 21:04:04 +00:00
Dhananjay Phadke
567c6c4e2b netxen: firmware download improvements
o set port mode after resetting device.
o prefer cut-through firmware (doesn't require on-card memory).
o load flashed firmware if newer.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03 00:05:27 -08:00
Dhananjay Phadke
1f434f6384 netxen: support larger dma addressing
Support larger dma mask if firmware indicates capability
to handle larger addresses.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-03 00:05:26 -08:00
Ron Mercer
bcc2cb3b97 qlge: Add support for getting/setting port config.
This patch adds functionality to get and set port parameters.
Currently it is used to set maximum TX/RX frame sizes. This process is
also capable of setting:
1) Pause type: Standard or Priority based.
2) Loop back mode.
3) Enable Jumbo frame mode (included here...)

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:45:24 -08:00
Ron Mercer
cdca8d02ea qlge: Add support for device ID 8000.
This device has more firmware support for link management, setting
TX and RX maximum frame sizes.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:45:24 -08:00
Ron Mercer
ca0413b66a qlge: Add support for firmware mailbox commands.
This interface will be used for setting things like maximum
frame size, setting WOL, and ACKing changes requested by the FCOE
function.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:45:23 -08:00
Kuninori Morimoto
55ba99eb21 sh: Add support for SH7786 CPU subtype.
This adds preliminary support for the SH7786 CPU subtype.

While this is a dual-core CPU, only UP is supported for now. L2 cache
support is likewise not yet implemented.

More information on this particular CPU subtype is available at:

	http://www.renesas.com/fmwk.jsp?cnt=sh7786_root.jsp&fp=/products/mpumcu/superh_family/sh7780_series/sh7786_group/

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-03 15:40:25 +09:00
Eilon Greenstein
c1accad323 bnx2x: Version update
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:32:49 -08:00
Eilon Greenstein
0a64ea5748 bnx2x: Register dump
Adding "ethtool -d" support. Due to the complexity of the FW and HW, there are a
lot of different regions in the chip - to keep the code as clean as possible,
the ranges were put in an H file. Some areas cannot be read if the driver is
running - so by default, the driver will not access those areas - but any
programmer facing a problem will be able to easily manipulate the driver to
extract full dump. The full dump can also be used with kernel dump modules in
case of kernel panic.

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:32:48 -08:00
Eilon Greenstein
c3eefaf676 bnx2x: Debug prints
Add the FP index to relevant debug prints and simply beautify some others

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:32:48 -08:00
Eilon Greenstein
c016201c5c bnx2x: Whitespace
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:32:46 -08:00
Eilon Greenstein
8660d8c3ab bnx2x: Loopback support at external PHY
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:32:45 -08:00
Eilon Greenstein
9223dea6c7 bnx2x: Display BCM8481 FW version
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:32:44 -08:00
Eilon Greenstein
3b313b618b bnx2x: BCM8705 has no microcode
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:32:44 -08:00
Eilon Greenstein
d7bc788bec bnx2x: Enable BCM8726 module transmitter
When 8726 module detection option is disabled, module should be transmitting
regardless of invalid read from EEPROM

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:32:43 -08:00
Eilon Greenstein
cc1cb004df bnx2x: Supporting new BCM8726 FW
Microcode download requires write of another register and read from
"Limiting/LRM mode" register before setting

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:32:43 -08:00
Eilon Greenstein
762d5f6c95 bnx2x: Calling tx disable unconditionally
On unload, the FW assumes that no packets will be sent after the driver sends
the FW stop command. To ensure that, the driver must always call
netif_tx_disable

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:32:42 -08:00
Eilon Greenstein
490c3c9bf9 bnx2x: Using DMA engine
Using DMA engine (DMAE) to initialize large consecutive memories in the chip

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:32:41 -08:00
Eilon Greenstein
2059aba7e4 bnx2x: Missing module parameter description
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:32:40 -08:00
Eilon Greenstein
8534f32c2f bnx2x: napi_poll budget check
Check the napi_poll budget only when updating it. Also add a comment to explain
the rmb

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:32:39 -08:00
Eilon Greenstein
7961f79123 bnx2x: Unlimited Tx interrupt work
The Tx interrupt is very short and there is no need to limit it to a budget

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:32:39 -08:00
Eilon Greenstein
161197853d bnx2x: Add rmb to read status block indices on load
Add rmb to read status block indices on load

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:32:38 -08:00
Eilon Greenstein
6044735d8d bnx2x: Reduce the likelihood of smb_mb
As the comment explains, this smb_mb is needed only if the queue is stopped
(which is unlikely) so the barrier can be moved to that location

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:32:38 -08:00
Eilon Greenstein
0d1a8d2d7d bnx2x: Misleading name
As noted by Ben Hutchings <bhutchings@solarflare.com>, these are the
capabilities offsets and not the ID itself

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:32:37 -08:00
Eilon Greenstein
98589bb109 bnx2x: Remove redundant smb_mb on unload
As noted by Ben Hutchings <bhutchings@solarflare.com>, these smb_mb are not
needed

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:32:36 -08:00
Russell King
07555c9880 OMAP: enable smc911x support for LDP platform
The following patch enables SMC911x support to work on the OMAP LDP
board.  Although the SMC911x driver will eventually be obsoleted, the
smsc911x patches are rather invasive for the -rc kernels.

Rather than risk destablising smsc911x, this simpler patch is preferred
to allow the network interface to work.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:29:37 -08:00
David Dillow
a8c9a53c22 typhoon: repair firmware loading
The conversion to avoid using pci_alloc_consistent() broke the firmware
load process, as well as added an order-4 kmalloc and doubled the memory
usage of the firmware image. Go back to loading a page at a time.

Also, since the user can now give us utter garbage for firmware, do a
cursory validation so we don't try to load just anything.

Signed-off-by: David Dillow <dave@thedillows.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 22:15:09 -08:00
Kay Sievers
93fde77454 sh: struct device - replace bus_id with dev_name(), dev_set_name()
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-03 12:16:12 +09:00
Linus Torvalds
43e407071d Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/i915: Fix use-before-null-check in i915_irq_emit().
  drm: Avoid client deadlocks when the master disappears.
  drm: Wake up all lock waiters when the master disappears.
  drm: Don't return ERESTARTSYS to user-space.
2009-03-02 16:11:36 -08:00
Jesse Brandeburg
d20b606c99 e1000: fix unmap bug
This is in reference to the issue shown in kerneloops (search e1000 unmap)

The e1000 transmit code was calling pci_unmap_page on dma handles that it
might have called pci_map_single on.

Same bug as e1000e

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 16:03:21 -08:00
Jesse Brandeburg
8ddc951c73 e1000e: fix unmap bug
This is in reference to https://bugzilla.redhat.com/show_bug.cgi?id=484494
Also addresses issue show in kerneloops

The e1000e transmit code was calling pci_unmap_page on dma handles that it
might have called pci_map_single on.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 16:02:53 -08:00
Alexander Duyck
19147bb5f1 igb: remove skb_orphan calls
Remove skb_orphan call from igb driver as it can cause multiple issues due
to the fact that it is calling the desctructor and removing the skb from
the socket prior to transmission.

The call was added to improve performance but did so by allowing the skb to
be removed from the socket which gave the socket more window space to
transmit.  The performance gain is not worth the extra problems that this
kind of workaround can introduce as this could lead to a potential DoS if a
UDP stream decided to monopolize the transmit path.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 16:01:53 -08:00
Eric Anholt
299eb93c5f drm/i915: Fix use-before-null-check in i915_irq_emit().
This could be triggered by a client asking to emit an irq when the device
wasn't initialized.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-03-03 09:53:05 +10:00