Commit graph

93,853 commits

Author SHA1 Message Date
Paul Mundt
07d2a1a1cd serial: sh-sci: Implement CONSOLE_POLL support and kill off old kgdb console.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:44:04 +09:00
Peter Griffin
2825999e8a sh: Add support for SH7201 CPU subtype.
This patch adds support for the SH-2A FPU based SH7201 processor subtype.

Signed-off-by: Peter Griffin <pgriffin@mpc-data.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:43:50 +09:00
Nobuhiro Iwamatsu
5c72f303a2 sh: sh7760fb: Add support SH7720/SH7721 of Renesas
SH7720 and 7721 has IP of Frame Buffer same as SH7760.
This driver can support these.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:55 +09:00
Nobuhiro Iwamatsu
679dc3c92c sh: sh7760fb: Fix color pallette setting
The setting of the color palette was wrong, fixed it.
And removed fb_setcmap, and added fb_setcolreg function.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:54 +09:00
Paul Mundt
d6435102d4 usb: Fix up sh_mobile usbf clock framework warnings.
drivers/usb/gadget/m66592-udc.c: In function 'm66592_probe':
drivers/usb/gadget/m66592-udc.c:1672: warning: label 'clean_up2' defined but not used
drivers/usb/host/r8a66597-hcd.c: In function 'r8a66597_probe':
drivers/usb/host/r8a66597-hcd.c:2401: warning: label 'clean_up2' defined but not used

Added by commit 985fc7c81c7852f2e104c71cbe913ace683c9e6a ("sh: sh_mobile
usbf clock framework support").

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:52 +09:00
Michael Trimarchi
e7c98dc76d serial: sh-sci: Codestyle cleanup patch.
Trivial coding style cleanups.

Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:52 +09:00
Paul Mundt
af505b1eab media: sh_mobile_ceu_camera: Add HAVE_CLK dependency.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:52 +09:00
Magnus Damm
b51339fff2 sh: sh_mobile lcdc clock framework support
Add clock framework support to the lcdc driver and
adjust the board specific code accordingly.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:52 +09:00
Magnus Damm
765786e0ae sh: sh_mobile usb clock framework support
Add clock framework support to the usb/r8a66597 driver and
adjust the cpu specific code accordingly.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:51 +09:00
Magnus Damm
af5be79a7f sh: sh_mobile usbf clock framework support
Add clock framework support to the usbf/m66592 driver and
adjust the cpu specific code accordingly.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:51 +09:00
Magnus Damm
a42b6dd69c sh: sh_mobile ceu clock framework support
Add clock framework support to the sh_mobile ceu and
adjust the board specific code accordingly.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:51 +09:00
Magnus Damm
090d951b69 sh: sh_mobile keysc clock framework support
Add clock framework support to the sh_mobile keysc driver and
adjust the board specific code accordingly.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:51 +09:00
Magnus Damm
a5616bd0f1 sh: sh_mobile i2c clock framework support
Add clock framework support to the sh_mobile i2c driver and
adjust the processor specific code accordingly.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22 18:42:51 +09:00
Matt Carlson
d3d317092b tg3: Update version to 3.97
This patch updates the version number to 3.97.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-21 20:21:52 -08:00
Matt Carlson
aa10f27d99 tg3: tg3.h cleanups
This patch cleans up the tg3 header file by removing the preprocessor
definitions for standard PCI configuration space registers.  The driver
should be using the standard definitions when needed.  The patch
continues by removing redundant PHY related definitions and reorganizes
some of the remaining entries.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-21 20:21:18 -08:00
Matt Carlson
69fc405318 tg3: Remove unused cfgspc device members
This patch removes the pci_bist and pci_hdr_type members from the
device structure and removes the code that references them.  They are
not really used.

The patch rounds out the changes by moving the pci_cmd member to plug
a structure hole that would have been created.  On 32-bit systems, this
movement removes a subsequent structure hole later in the structure. On
64-bit systems though, the movement merely consolidates two holes into
one larger hole.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-21 20:19:57 -08:00
Matt Carlson
027455adac tg3: Cleanup IPV6 LSO
This patch attempts to make the relationship between IPV6 checksum
offload and IPV6 LSO more obvious.  The patch also toggles a bit
needed for IPV6 LSO on 5785 and 57780 devices.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-21 20:19:30 -08:00
Matt Carlson
2023276ebf tg3: WOL fixes
The first hunk of this patch inverts a flag that was accidentally
toggled as part of commit 0a459aac9d
("tg3: Allow WOL for phylib controlled Broadcom phys").

The second hunk of the patch removes the call to
device_may_wakeup() in the 5906 config detection path.  At the
point of the call, the driver shouldn't be querying for WOL
capability.  It should be detecting and setting it.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-21 20:18:56 -08:00
Don Skidmore
bfb8cc31b1 ixgbe: fix the display of DCB control stats in ethtool
Priority flow contol statistics for Data Center Bridging (DCB) weren't
included in ethtool.  This patch adds them.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Eric W Multanen <eric.w.multanen@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-21 20:11:04 -08:00
Don Skidmore
f4314e815e net: add DCNA attribute to the BCN interface for DCB
Adds the Backward Congestion Notification Address (BCNA) attribute to the
Backward Congestion Notification (BCN) interface for Data Center Bridging
(DCB), which was missing.  Receive the BCNA attribute in the ixgbe driver.
The BCNA attribute is for a switch to inform the endstation about the physical
port identification in order to support BCN on aggregated links.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Eric W Multanen <eric.w.multanen@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2008-12-21 20:10:29 -08:00
Don Skidmore
1486a61ebc net: fix DCB setstate to return success/failure
Data Center Bridging (DCB) had no way to know if setstate had failed in the
driver.  This patch enables dcb netlink code to handle the status for the DCB
setstate interface.  Likewise it allows the driver to return a failed status
if MSI-X isn't enabled.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Eric W Multanen <eric.w.multanen@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-21 20:09:50 -08:00
David S. Miller
c2da953a46 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 2008-12-21 19:57:10 -08:00
Krzysztof Hałasa
59f8500efb Convert ixp4xx_eth driver to use net_device_ops.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22 02:04:52 +01:00
Julia Lawall
4cb56b6856 drivers/net/wan: Remove redundant test
arg is checked not to be NULL a few lines before.

A simplified version of the semantic patch that makes this change is as
follows: (http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
expression E;
position p1,p2;
@@

if (x@p1 == NULL || ...) { ... when forall
   return ...; }
... when != \(x=E\|x--\|x++\|--x\|++x\|x-=E\|x+=E\|x|=E\|x&=E\|&x\)
(
x@p2 == NULL
|
x@p2 != NULL
)

// another path to the test that is not through p1?
@s exists@
local idexpression r.x;
position r.p1,r.p2;
@@

... when != x@p1
(
x@p2 == NULL
|
x@p2 != NULL
)

@fix depends on !s@
position r.p1,r.p2;
expression x,E;
statement S1,S2;
@@

(
- if ((x@p2 != NULL) || ...)
  S1
|
- if ((x@p2 == NULL) && ...) S1
|
- BUG_ON(x@p2 == NULL);
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22 01:12:09 +01:00
Krzysztof Hałasa
93bc933524 HDLC_PPP: Fix Configure-Ack to return original options as required by the standard.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22 01:00:05 +01:00
Krzysztof Hałasa
e6da96ace8 IXP4xx: move common debugging from network drivers to QMGR module.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22 00:48:00 +01:00
Krzysztof Hałasa
f5b89e41ce WAN: Add IXP4xx HSS HDLC driver.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22 00:47:31 +01:00
Krzysztof Hałasa
490b77224f IXP4xx: Add ethtool support to Ethernet driver.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22 00:42:55 +01:00
Krzysztof Hałasa
4954936e25 IXP4xx: Add PHYLIB MII ioctl to the Ethernet driver.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22 00:42:55 +01:00
Krzysztof Hałasa
2098c18d6c IXP4xx: Add PHYLIB support to Ethernet driver.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22 00:42:55 +01:00
Krzysztof Hałasa
b4c7d3b072 IXP4xx: Make the Ethernet driver use built-in netdev stats.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22 00:42:55 +01:00
Krzysztof Hałasa
3c36a837a9 IXP4xx: Silence section mismatch warning in Ethernet driver.
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2008-12-22 00:41:50 +01:00
David Disseldorp
bba7ebba3b IB/iser: Avoid recv buffer exhaustion caused by unexpected PDUs
iSCSI/iSER targets may send PDUs without a prior request from the
initiator.  RFC 5046 refers to these PDUs as "unexpected".  NOP-In PDUs
with itt=RESERVED and Asynchronous Message PDUs occupy this category.

The amount of active "unexpected" PDU's an iSER target may have at any
time is governed by the MaxOutstandingUnexpectedPDUs key, which is not
yet supported.

Currently when an iSER target sends an "unexpected" PDU, the
initiators recv buffer consumed by the PDU is not replaced.  If over
initial_post_recv_bufs_num "unexpected" PDUs are received then the
receive queue will run out of receive work requests entirely.

This patch ensures recv buffers consumed by "unexpected" PDUs are
replaced in the next iser_post_receive_control() call.

Signed-off-by: David Disseldorp <ddiss@sgi.com>
Signed-off-by: Ken Sandars <ksandars@sgi.com>
Acked-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-21 13:56:50 -08:00
Julia Lawall
139cdab0a2 IB/ehca: Remove redundant test of vpage
vpage is checked not to be NULL just after it is initialized at the
beginning of each loop iteration.

A simplified version of the semantic patch that makes this change is
as follows: (http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
expression E;
position p1,p2;
@@

if (x@p1 == NULL || ...) { ... when forall
   return ...; }
... when != \(x=E\|x--\|x++\|--x\|++x\|x-=E\|x+=E\|x|=E\|x&=E\|&x\)
(
x@p2 == NULL
|
x@p2 != NULL
)

// another path to the test that is not through p1?
@s exists@
local idexpression r.x;
position r.p1,r.p2;
@@

... when != x@p1
(
x@p2 == NULL
|
x@p2 != NULL
)

@fix depends on !s@
position r.p1,r.p2;
expression x,E;
statement S1,S2;
@@

(
- if ((x@p2 != NULL) || ...)
  S1
|
- if ((x@p2 == NULL) && ...) S1
|
- BUG_ON(x@p2 == NULL);
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-12-21 13:29:13 -08:00
Wolfram Sang
418441d9eb powerpc/mpc5200: fix error paths in PSC UART probe function
- error cases for mapbase and irq were unbundled
- mapped irq now gets disposed on error

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-12-21 02:54:32 -07:00
Wolfram Sang
aec739e010 powerpc/mpc5200: add rts/cts handling in PSC UART driver
Add RTS/CTS-support for the PSC of the MPC5200B. Tested with a Phytec
MPC5200B-IO.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-12-21 02:54:32 -07:00
René Bürgel
b65149880d powerpc/mpc5200: Make PSC UART driver update serial errors counters
This patch adds the capability to the mpc52xx-uart to report framing
errors, parity errors, breaks and overruns to userspace. These values
may be requested in userspace by using the ioctl TIOCGICOUNT.

Signed-off-by: René Bürgel <r.buergel@unicontrol.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-12-21 02:54:31 -07:00
Wolfram Sang
e51f47a5c6 powerpc/mpc5200: Remove obsolete code from mpc5200 MDIO driver
As this driver polls for a complete MDIO transaction, there is no need
to enable interrupts for it.  Furthermore, make both checks for
freeing MDIO-bus irqs consistent.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-12-21 02:54:30 -07:00
Tim Yamin
6b61e69e7b powerpc/mpc5200: Add MDMA/UDMA support to MPC5200 ATA driver
This patch adds MDMA/UDMA support using BestComm for DMA on the MPC5200
platform.  Based heavily on previous work by Freescale (Bernard Kuhn,
John Rigby) and Domen Puncer.

With this patch, a SanDisk Extreme IV CF card gets read speeds of
approximately 26.70 MB/sec.

Signed-off-by: Tim Yamin <plasm@roo.me.uk>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-12-21 02:54:29 -07:00
Benjamin Herrenschmidt
64b3d0e812 powerpc/mm: Rework usage of _PAGE_COHERENT/NO_CACHE/GUARDED
Currently, we never set _PAGE_COHERENT in the PTEs, we just OR it in
in the hash code based on some CPU feature bit.  We also manipulate
_PAGE_NO_CACHE and _PAGE_GUARDED by hand in all sorts of places.

This changes the logic so that instead, the PTE now contains
_PAGE_COHERENT for all normal RAM pages thay have I = 0 on platforms
that need it.  The hash code clears it if the feature bit is not set.

It also adds some clean accessors to setup various valid combinations
of access flags and change various bits of code to use them instead.

This should help having the PTE actually containing the bit
combinations that we really want.

I also removed _PAGE_GUARDED from _PAGE_BASE on 44x and instead
set it explicitely from the TLB miss.  I will ultimately remove it
completely as it appears that it might not be needed after all
but in the meantime, having it in the TLB miss makes things a
lot easier.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21 14:21:16 +11:00
Benjamin Herrenschmidt
5e696617c4 powerpc/mm: Split mmu_context handling
This splits the mmu_context handling between 32-bit hash based
processors, 64-bit hash based processors and everybody else.  This is
preliminary work for adding SMP support for BookE processors.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21 14:21:15 +11:00
Hendrik Brueckner
368c1e3249 hvc_console: Escape magic sysrq key
The ctrl-o (^O) is a common control key used by several applications,
such as vim, but hvc_console uses ^O as the magic-sysrq key.  This
commit allows users to send ^O to applications by pressing ^O twice
in succession.

To implement this, this commit introduces a check if ^O is pressed
again if the sysrq_pressed variable is already set.  In this case,
clear sysrq_pressed state and flip the ^O character to the tty.  (The
old behavior has always set "sysrq_pressed" if ^O has been entered,
and it has not flipped the ^O character to the tty.)

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21 14:21:15 +11:00
Anton Vorontsov
749820928a of/gpio: Implement of_gpio_count()
This function is used to count how many GPIOs are specified for
a device node.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21 14:21:14 +11:00
Anton Vorontsov
7736a3db98 of: of_parse_phandles_with_args() learns to differentiate 'hole' cells
Given this list (contains three gpio specifiers, one of which is a hole):

gpios = <&phandle1 1 2 3
         0 /* a hole */
         &phandle2 4 5 6>;

of_parse_phandles_with_args() would report -ENOENT for the `hole'
specifier item, the same error value is used to report the end of the
list, for example.

Sometimes we want to differentiate holes from real errors -- for
example when we want to count all the [syntax correct] specifiers.

With this patch of_parse_phandles_with_args() will report -EEXITS when
somebody requested to parse a hole.

Also, make the out_{node,args} arguments optional, when counting we
don't really need the out values.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21 14:21:14 +11:00
Anton Vorontsov
c1bb7c6d04 of: Minor simplification for the of_parse_phandles_with_args()
By using 'list++' in the beginning we can simplify the code a
little bit.

Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-21 14:21:14 +11:00
Roel Kluin
0de048aba1 Input: make some variables and functions static
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-12-20 15:11:18 -05:00
Kwangwoo Lee
50b6f1f4a4 Input: add tsc2007 based touchscreen driver
This drive has been tested on ARM9 based SoC - MV86XX.

Signed-off-by: Kwangwoo Lee <kwangwoo.lee@gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-12-20 05:00:43 -05:00
Paul Fox
8bbf2703c4 Input: psmouse - add module parameters to control OLPC touchpad delays
The HPGK touchpad that is found on the XO driver has historically
exhibitted eratic behaviour in various environments (very dry,
very humid, etc) that can be worked around via some delays. This
patch turns those delays into module parameters to make testing
simpler.

Signed-off-by: Paul Fox <pgf@laptop.org>
Signed-off-by: Deepak Saxena <dsaxena@laptop.org>
Acked-By: Andres Salomon <dilinger@debian.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-12-20 04:58:03 -05:00
Ozan Çağlayan
a6f66ddf7a Input: i8042 - add Gigabyte M912 netbook to noloop exception table
Gigabyte M912's touchpad needs i8042.noloop for working.

Signed-off-by: Ozan Çağlayan <ozan@pardus.org.tr>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-12-20 04:57:52 -05:00
Stuart Hopkins
4200844bd9 Input: atkbd - Samsung NC10 key repeat fix
This patch fixes the key repeat issue with the Fn+F? keys on the new
Samsung NC10 Netbook, so that the keys can be defined and used within
ACPID correctly, otherwise the keys repeat indefinately.

This solves part of http://bugzilla.kernel.org/show_bug.cgi?id=12021

Signed-off-by: Stuart Hopkins <stuart@dodgy-geeza.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-12-20 04:57:18 -05:00