Generic Fixups/Cleanups:
* am62*: emmc - drop disable-wp, Add bootphase tags to support MMC boot
SoC Specific features and Fixes:
AM62Ax:
* C7x and R5F support added
* Bug fix for emmc clock to point to default
* CPUFreq thermal throttling on thermal alert
AM62P5:
* Add RNG Node (common to J722s)
* Bug fix for emmc clock to point to default (common to J722S)
AM625:
* Wakeup R5 node
* Bug fix for emmc clock to point to default
* PRUSS-M support
* New GPU bindings
AM64:
* Switch to 64-bit address space for PCIe0
* Add PCIe control nodes for main_conf region
* Reserve timer nodes used by MCU F/w.
AM65:
* MMC: Add missing delay timing values for SDR and legacy modes
* Add compatible for AM65x syscon and PCIe control properties
(dtbs_check fixes)
J7200:
* PCIe control node to scm_conf, switch to 64-bit address space for PCIe1.
J721E:
* PCIe control node to scm_conf, switch to 64-bit address space for PCIe0,1.
J721S2:
* GPU node for Imagination Tech Rouge BXS GPU.
* PCIe control node to scm_conf, switch to 64-bit address space for PCIe1.
J722s/AM67A:
* Switch serdes status to be enabled by board file than at SoC level.
* Switch to 64-bit address space for PCIe0.
J784S4/J742S2/AM69:
* Add ASPCIE0 and enable output for PCIe1
* Fix length of serdes_ln_ctrl.
* Switch to 64-bit address space for PCIe0,1.
Board Specific:
AM62Ax:
* SK: co-processors C7x, R5, PWM support added
* phycore-som: co-processors C7x, R5
AM62P5:
* Add Toradex Verdin AM62P boards with Dahlia, Ivy, Mallow and Yavia support.
* SK: Add remote processor support, PWM
AM625:
* Add BeagleBoard.org PocketBeagle-2 support
* phycore-som: Enable R5F support
* Verdin: Add eeprom compatible fallback
* SK: Enable PWM, voltage supplies, clock, i2cmux rename for camera overlays
(dtbs_check fixes)
* BeaglePlay: Add voltage supplies for camera overlays (dtbs_check fixes)
* phyboard-lyra: Add cooling maps for fan
* emmc bug fixes: add non-removable flag for eMMC.
AM65:
* EVM: Add missing power supply description ofr Rocktech panel
(dtbs_check fixes)
J721E:
* EVM: Enable OSPI1
* EVM/SK: Dt nodes description for mandatory power suplpies for panel and
sensors (dtbs_check fixes)
J721S2/AM68:
* Add phyBOARD-Izar-AM68x
* am68-SK: Fix regulator hierarchy
J722s/AM67A:
* EVM: Add mux controls for CSI2, power regulator nodes and add overlays for
quad IMX219 and TEVI OV5640.
* BeagleY-AI: Add bootph for main_gpio1
J784S4/J742S2/AM69:
* usxgmii expansion board: Drop un-necessary pinctrl-names
* evm: Add overlay for USB0 Type-A option
-----BEGIN PGP SIGNATURE-----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=CjR6
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=w9D6
-----END PGP SIGNATURE-----
Merge tag 'ti-k3-dt-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.16
Generic Fixups/Cleanups:
* am62*: emmc - drop disable-wp, Add bootphase tags to support MMC boot
SoC Specific features and Fixes:
AM62Ax:
* C7x and R5F support added
* Bug fix for emmc clock to point to default
* CPUFreq thermal throttling on thermal alert
AM62P5:
* Add RNG Node (common to J722s)
* Bug fix for emmc clock to point to default (common to J722S)
AM625:
* Wakeup R5 node
* Bug fix for emmc clock to point to default
* PRUSS-M support
* New GPU bindings
AM64:
* Switch to 64-bit address space for PCIe0
* Add PCIe control nodes for main_conf region
* Reserve timer nodes used by MCU F/w.
AM65:
* MMC: Add missing delay timing values for SDR and legacy modes
* Add compatible for AM65x syscon and PCIe control properties
(dtbs_check fixes)
J7200:
* PCIe control node to scm_conf, switch to 64-bit address space for PCIe1.
J721E:
* PCIe control node to scm_conf, switch to 64-bit address space for PCIe0,1.
J721S2:
* GPU node for Imagination Tech Rouge BXS GPU.
* PCIe control node to scm_conf, switch to 64-bit address space for PCIe1.
J722s/AM67A:
* Switch serdes status to be enabled by board file than at SoC level.
* Switch to 64-bit address space for PCIe0.
J784S4/J742S2/AM69:
* Add ASPCIE0 and enable output for PCIe1
* Fix length of serdes_ln_ctrl.
* Switch to 64-bit address space for PCIe0,1.
Board Specific:
AM62Ax:
* SK: co-processors C7x, R5, PWM support added
* phycore-som: co-processors C7x, R5
AM62P5:
* Add Toradex Verdin AM62P boards with Dahlia, Ivy, Mallow and Yavia support.
* SK: Add remote processor support, PWM
AM625:
* Add BeagleBoard.org PocketBeagle-2 support
* phycore-som: Enable R5F support
* Verdin: Add eeprom compatible fallback
* SK: Enable PWM, voltage supplies, clock, i2cmux rename for camera overlays
(dtbs_check fixes)
* BeaglePlay: Add voltage supplies for camera overlays (dtbs_check fixes)
* phyboard-lyra: Add cooling maps for fan
* emmc bug fixes: add non-removable flag for eMMC.
AM65:
* EVM: Add missing power supply description ofr Rocktech panel
(dtbs_check fixes)
J721E:
* EVM: Enable OSPI1
* EVM/SK: Dt nodes description for mandatory power suplpies for panel and
sensors (dtbs_check fixes)
J721S2/AM68:
* Add phyBOARD-Izar-AM68x
* am68-SK: Fix regulator hierarchy
J722s/AM67A:
* EVM: Add mux controls for CSI2, power regulator nodes and add overlays for
quad IMX219 and TEVI OV5640.
* BeagleY-AI: Add bootph for main_gpio1
J784S4/J742S2/AM69:
* usxgmii expansion board: Drop un-necessary pinctrl-names
* evm: Add overlay for USB0 Type-A option
* tag 'ti-k3-dt-for-v6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (86 commits)
arm64: dts: ti: k3-j722s-evm: Add overlay for TEVI OV5640
arm64: dts: ti: k3-j722s-evm: Add overlay for quad IMX219
arm64: dts: ti: j722s-evm: Add MUX to control CSI2RX
arm64: dts: ti: j722s-evm: Add DT nodes for power regulators
arm64: dts: ti: k3-am62a-phycore-som: Reserve main_timer2 for C7x DSP
arm64: dts: ti: k3-am62a-phycore-som: Reserve main_rti4 for C7x DSP
arm64: dts: ti: k3-am62a-phycore-som: Enable Co-processors
arm64: dts: ti: k3-am62-phycore-som: Enable Co-processors
arm64: dts: ti: k3-am62x-phyboard-lyra-gpio-fan: Update cooling maps
arm64: dts: ti: k3-am62a: Enable CPU freq throttling on thermal alert
arm64: dts: ti: k3-j721e-common-proc-board: Enable OSPI1 on J721E
arm64: dts: ti: k3-j721s2: Add GPU node
arm64: dts: ti: k3-am62: New GPU binding details
arm64: dts: ti: k3-am62-main: Add PRUSS-M node
arm64: dts: ti: k3-am64: Reserve timers used by MCU FW
arm64: dts: ti: k3-am62a7-sk: Reserve main_rti4 for C7x DSP
arm64: dts: ti: k3-am62a7-sk: Reserve main_timer2 for C7x DSP
arm64: dts: ti: k3-am62x-sk-common: Enable IPC with remote processors
arm64: dts: ti: k3-am62p5-sk: Enable IPC with remote processors
arm64: dts: ti: k3-am62a7-sk: Enable IPC with remote processors
...
Link: https://lore.kernel.org/r/20250512144807.yn64klchtmjjl6ac@protrude
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Convert the clock device tree bindings to yaml for the Altera SoCFPGA
Cyclone5, Arria5, and Arria10 chip families. Since the clock nodes are
subnodes to Altera SOCFPGA Clock Manager, the yaml was added to
socfpga-clk-manager.yaml.
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Convert the legacy interrupt controller (LIC) and APBDMA controller
device tree bindings from freeform text to dt-schema.
Document the ASUS Transformer Pad TF300TL compatible string and add
missing compatible strings for newer generations of the Tegra CEC.
-----BEGIN PGP SIGNATURE-----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=bNoB
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=K+FD
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.16-dt-bindings' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
Device tree bindings updates for v6.16-rc1
Convert the legacy interrupt controller (LIC) and APBDMA controller
device tree bindings from freeform text to dt-schema.
Document the ASUS Transformer Pad TF300TL compatible string and add
missing compatible strings for newer generations of the Tegra CEC.
* tag 'tegra-for-6.16-dt-bindings' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
media: dt-bindings: Document Tegra186 and Tegra194 cec
dt-bindings: arm: tegra: Add Asus Transformer Pad TF300TL
dt-bindings: arm: tegra: Group Tegra30 based ASUS Transformers
dt-bindings: interrupt-controller: Convert nvidia,tegra20-ictlr to DT schema
dt-bindings: dma: nvidia,tegra20-apbdma: convert text based binding to json schema
Link: https://lore.kernel.org/r/20250509212604.2849901-1-treding@nvidia.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New peripherals: RNG+PCIe+SATA on rk3576; eDP on rk3588;
DMA+I2C+PWM on rk3528; DSI on rk3588
- SPI-flash binding got a supply-property, so a number of boards add
this supply.
- RK3588 wrongly declared the shared memory with SCMI in the peripheral
space - moved to the correct reserved-memory structure now.
- The rest is peripheral enablement accross many boards - like hdmi
output for a big number of boards, regulators, eeprom, etc.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmgb1wYQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgS6oB/wPyZaVADlf5ErSCQJU9ObV0zA0o5z9n9eO
yPKg7NIgE7OKpUiPFnTBr5YatCO1Bvxndvsxu4K0m9mCcc/S/bgW3ghf9d+X2+Ig
/9jl36Le89ve9MUi5UYP0s0AzD7Sn/LuBUN9W5Uy5JmQNLN6DJx9MMRyxbb+4FTX
Xos2s+TSQEjCva2R6tOfM9vWZCZxExMBzsbrrmKyKzwiS6+tjxu0ZNbysifA3gsb
KBAgHpcK6io9So1jq4+r+haQMFcj9Pb36CVJPERBCVSQsyMCthMpLGa6punZOfeS
DO0wPMAgPxzr9umzYxgnvEq8HHqhFz8sYoVEYFSMUGx0J68WrFfY
=+ZqB
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=yXtJ
-----END PGP SIGNATURE-----
Merge tag 'v6.16-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
- New boards: rk3588-evb2, rk3588-tiger-haikou-video-demo-overlay
- New peripherals: RNG+PCIe+SATA on rk3576; eDP on rk3588;
DMA+I2C+PWM on rk3528; DSI on rk3588
- SPI-flash binding got a supply-property, so a number of boards add
this supply.
- RK3588 wrongly declared the shared memory with SCMI in the peripheral
space - moved to the correct reserved-memory structure now.
- The rest is peripheral enablement accross many boards - like hdmi
output for a big number of boards, regulators, eeprom, etc.
* tag 'v6.16-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (52 commits)
arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3566-rock3c
arm64: dts: rockchip: Enable regulators for Radxa E20C
arm64: dts: rockchip: Add pwm nodes for RK3528
arm64: dts: rockchip: Add onboard EEPROM for Radxa E20C
arm64: dts: rockchip: Add I2C controllers for RK3528
arm64: dts: rockchip: add RK3576 RNG node
arm64: dts: rockchip: Switch to undeprecated qcom,calibration-variant on RK3399
arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3566-quartz64-b
arm64: dts: rockchip: Add phy-supply to gmac0 on NanoPi R5S
arm64: dts: rockchip: fix usb-c port functionality on rk3588-nanopc-t6
arm64: dts: rockchip: Enable bluetooth of AP6611s on OrangePI5 Max/Ultra
arm64: dts: rockchip: add SATA nodes to RK3576
arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3588-rock-5b
arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3566-pinetab2
arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3399-rockpro64
arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3328-rock64
arm64: dts: rockchip: Add vcc supply to spi flash on rk3399-roc-pc
arm64: dts: rockchip: enable pcie on Sige5
arm64: dts: rockchip: Add HDMI support for roc-rk3576-pc
arm64: dts: rockchip: Enable HDMI0 audio output for Indiedroid Nova
...
Link: https://lore.kernel.org/r/2307187.iZASKD2KPV@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 6.16, please pull the following:
- Arthur adds a pinctrl node for BCM21664 and updates BCM23550 to use
it, he also drops the DTS file for the BCM59056 PMU chip and leaving
that board level DTS files
- Stefan documents and adds support for the Raspberry Pi 2 2nd revision.
-----BEGIN PGP SIGNATURE-----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=UBkl
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Z7eF
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.16/devicetree' of https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM-based SoC Device Tree changes
for 6.16, please pull the following:
- Arthur adds a pinctrl node for BCM21664 and updates BCM23550 to use
it, he also drops the DTS file for the BCM59056 PMU chip and leaving
that board level DTS files
- Stefan documents and adds support for the Raspberry Pi 2 2nd revision.
* tag 'arm-soc/for-6.16/devicetree' of https://github.com/Broadcom/stblinux:
arm64: dts: bcm: Add reference to RPi 2 (2nd rev)
ARM: dts: bcm: Add support for Raspberry Pi 2 (2nd rev)
dt-bindings: arm: bcm2835: Add Raspberry Pi 2 (2nd rev)
ARM: dts: Drop DTS for BCM59056 PMU
ARM: dts: bcm2166x: Add bcm2166x-pinctrl DTSI
ARM: dts: bcm2166x-common: Add pinctrl node
Link: https://lore.kernel.org/r/20250505165810.1948927-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add SDHI, ICU, I2C, PMIC, and GPU support on the RZ/G3E SoC and the
RZ/G3E SoM and SMARC Carrier-II EVK development board,
- Add internal SDHI regulator support on the RZ/V2H(P) SoC,
- Add UFS tuning parameters in E-FUSE on the R-Car S4-8 ES1.2 SoC,
- Add support for Ethernet ports C and D, I2C, keys, and SDHI on the
RZ/N1D SoC and the RZN1D-DB and RZN1D-EB development and expansion
boards,
- Add initial support for the RZ/V2N (R9A09G056) and the RZ/V2N EVK
board,
- Add support for the Retronix Sparrow Hawk board, which is based on
R-Car V4H ES3.0,
- Add ISP core support on R-Car V3U, V4H, and V4M,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCaAtk+QAKCRCKwlD9ZEnx
cPhbAQDUvBdFFN8qHsr6dFmEnUw+iQSqW0l+Rtc9E3Lw/lB2qAD+PB34sVcOnuOi
hBP0ty3219WF8KYaAx1jOfJqA0doFQ8=
=whxP
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=aTIg
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v6.16-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.16
- Add SDHI, ICU, I2C, PMIC, and GPU support on the RZ/G3E SoC and the
RZ/G3E SoM and SMARC Carrier-II EVK development board,
- Add internal SDHI regulator support on the RZ/V2H(P) SoC,
- Add UFS tuning parameters in E-FUSE on the R-Car S4-8 ES1.2 SoC,
- Add support for Ethernet ports C and D, I2C, keys, and SDHI on the
RZ/N1D SoC and the RZN1D-DB and RZN1D-EB development and expansion
boards,
- Add initial support for the RZ/V2N (R9A09G056) and the RZ/V2N EVK
board,
- Add support for the Retronix Sparrow Hawk board, which is based on
R-Car V4H ES3.0,
- Add ISP core support on R-Car V3U, V4H, and V4M,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.16-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (29 commits)
arm64: dts: renesas: r8a779h0: Add ISP core function block
arm64: dts: renesas: r8a779g0: Add ISP core function block
arm64: dts: renesas: r8a779a0: Add ISP core function block
arm64: dts: renesas: r8a779g3: Add Retronix R-Car V4H Sparrow Hawk board support
arm64: dts: renesas: rzg3e-smarc-som: Enable Mali-G52
arm64: dts: renesas: r9a09g047: Add Mali-G52 GPU node
arm64: dts: renesas: rzg3e-smarc-som: Add RAA215300 pmic support
arm64: dts: renesas: rzg3e-smarc-som: Add I2C2 device pincontrol
ARM: dts: renesas: r9a06g032-rzn1d400-eb: describe SD card port
ARM: dts: renesas: r9a06g032: Describe SDHCI controllers
arm64: dts: renesas: Add initial device tree for RZ/V2N EVK
arm64: dts: renesas: Add initial SoC DTSI for RZ/V2N
dt-bindings: pinctrl: renesas: Document RZ/V2N SoC
dt-bindings: clock: renesas: Document RZ/V2N SoC CPG
dt-bindings: soc: renesas: Document SYS for RZ/V2N SoC
dt-bindings: soc: renesas: Document Renesas RZ/V2N SoC variants and EVK
ARM: dts: renesas: r9a06g032-rzn1d400-db: Describe keys
ARM: dts: renesas: r9a06g032-rzn1d400-eb: Describe I2C bus
ARM: dts: renesas: r9a06g032-rzn1d400-db: Describe I2C bus
ARM: dts: renesas: r9a06g032: Describe I2C controllers
...
Link: https://lore.kernel.org/r/cover.1745582596.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Document support for the Renesas RZ/T2H (R9A09G077) SoC and the
RZT2H-EVK evaluation board,
- Document support for the Retronix Sparrow Hawk board, which is based
on R-Car V4H ES3.0.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCaAte3gAKCRCKwlD9ZEnx
cKoRAP0QetOrl/VcQiQeTqc5q3OEhL+hZaiBl8Qx8A2AxILFJAD8CI7BXzFc0jxB
X9k5Z6PJoe6gYjlpOwkUT7ZUYxV7xAs=
=OvVE
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=6qYU
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-bindings-for-v6.16-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DT binding updates for v6.16
- Document support for the Renesas RZ/T2H (R9A09G077) SoC and the
RZT2H-EVK evaluation board,
- Document support for the Retronix Sparrow Hawk board, which is based
on R-Car V4H ES3.0.
* tag 'renesas-dt-bindings-for-v6.16-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: soc: renesas: Document Retronix R-Car V4H Sparrow Hawk board support
dt-bindings: vendor-prefixes: Add Retronix Technology Inc.
dt-bindings: soc: renesas: Add Renesas RZ/T2H (R9A09G077) SoC
Link: https://lore.kernel.org/r/cover.1745582594.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add devicetree bindings for PHYTEC phyBOARD-Nash-i.MX93 board based on
the existing PHYTEC phyCORE-i.MX93 SoM (System-on-Module).
Adjust the compatibles for the existing phyBOARD-Segin-i.MX93 board, to
be able to add additional board based on the phyCORE-i.MX93 SoM.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
TQMa95xxSA is a SOM using NXP i.MX95 CPU. MB-SMARC-2 is a carrier
reference design.
[1] https://www.tq-group.com/en/products/tq-embedded/arm-architecture/tqma95xxsa/
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
TQMa8XxS is a SOM series featuring NXP i.MX8X SoC.
They are called TQMa8XQPS and TQMa8XDPS respectively.
MB-SMARC-2 is a carrier reference design.
Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
imx8mp-libra-rdk-fpsc is a development board based on the phyCORE-i.MX
8M Plus FPSC SoM. Add its description and binding. The
imx8mp-phycore-fpsc som differs from the existing phyCORE-i.MX 8M Plus
(dts: imx8mp-phycore-som.dtsi) in its physical form regarding the ball
grid array. Other differences between the SoMs are missing SPI-NOR on
this SoM and 1.8V IO voltage instead of 3.3V as found on the existing
imx8mp-phycore-som. As a result the imx8mp-phycore-som is not compatible
with this new libra development board.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
These are already used in device trees, so describe them here. As the
driver only declares up through Tegra210, these must use a fallback
compatible of tegra210-cec.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://lore.kernel.org/r/20250413-tegra-cec-v4-1-b6337b66ccad@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
Convert the NVIDIA Legacy interrupt controller binding to schema
format. It's a straight-forward conversion of the typical interrupt
controller.
All the possible compatibles were not documented, so add the ones in
use.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250505144759.1291261-1-robh@kernel.org
Signed-off-by: Thierry Reding <treding@nvidia.com>
Update text binding to YAML.
Changes during conversion:
- Add a fallback for "nvidia,tegra30-apbdma" as it is
compatible with the IP core on "nvidia,tegra20-apbdma".
- Update examples and include appropriate file directives to resolve
errors identified by `dt_binding_check` and `dtbs_check`.
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250507-nvidea-dma-v4-2-6161a8de376f@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the Raspberry Pi 2 (2nd rev) based on BCM2837 to DT schema.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250418143307.59235-2-wahrenst@gmx.net
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Document the compatible string for Exynos7870 - "samsung,exynos7870".
The following devices are also added:
- Galaxy A2 Core ("samsung,a2corelte")
- Galaxy J6 ("samsung,j6lte")
- Galaxy J7 Prime ("samsung,on7xelte")
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250501-exynos7870-v7-1-bb579a27e5eb@disroot.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add devicetree bindings for the AM68x based phyCORE-AM68x/TDA4x SoM
and the phyBOARD-Izar carrier board.
Signed-off-by: Dominik Haller <d.haller@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250423133635.29897-1-d.haller@phytec.de
Signed-off-by: Nishanth Menon <nm@ti.com>
Add the child nodes that can be found under this node. Then as done
for other similar devices (J7200 and J721s2) add support for the AM654
system controller to this binding.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250421214620.3770172-2-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add MBa91xxCA starterkit base board for TQMa93xxCA/LA SOM for
parallel display evaluation.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Adds support for the Nitrogen8M Plus System on Module and the Nitrogen8M
Plus ENC Carrier Board.
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Document Retronix R-Car V4H Sparrow Hawk board based on Renesas R-Car V4H ES3.0
(R8A779G3) SoC. This is a single-board computer with single gigabit ethernet,
DSI-to-eDP bridge, DSI and two CSI2 interfaces, audio codec, two CANFD ports,
micro SD card slot, USB PD supply, USB 3.0 ports, M.2 Key-M slot for NVMe SSD,
debug UART and JTAG.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250420173829.200553-3-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add a pattern property for pcie-ctrl which can be part of this controller.
Signed-off-by: Andrew Davis <afd@ti.com>
[j-choudhary@ti.com: Change description and add example]
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250402113201.151195-2-j-choudhary@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add documentation for the pin controller found on the Renesas RZ/V2N
(R9A09G056) SoC. The RZ/V2N PFC differs slightly from the RZ/G2L family
and is almost identical to the RZ/V2H(P) SoC, except that the RZ/V2H(P) SoC
has an additional dedicated pin.
To account for this, a SoC-specific compatible string,
'renesas,r9a09g056-pinctrl', is introduced for the RZ/V2N SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-10-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Document the device tree bindings for the Renesas RZ/V2N (R9A09G056)
SoC Clock Pulse Generator (CPG).
Update `renesas,rzv2h-cpg.yaml` to include the compatible string for
RZ/V2N SoC and adjust the title and description accordingly.
Additionally, introduce `renesas,r9a09g056-cpg.h` to define core clock
constants for the RZ/V2N SoC. Note the existing RZ/V2H(P) family-specific
clock driver will be reused for this SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-7-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add the RZ/V2N (R9A09G056) variant to the existing RZ/V2H(P) System
Controller (SYS) binding, as both IPs are very similar.
However, they have different SoC IDs, and the RZ/V2N does not have
PCIE1 configuration registers, unlike the RZ/V2H(P) SYS IP. To handle
these differences, introduce a new compatible string
`renesas,r9a09g056-sys`.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Document the Renesas RZ/V2N (R9A09G056) SoC variants, distinguishing
between configurations with and without specific hardware features such
as GPU, ISP, and cryptographic extensions. Also, document the
"renesas,rzv2n-evk" compatible string for the RZ/V2N EVK board.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250407191628.323613-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add compatible string "nxp,imx94-sysctr-timer" for the i.MX94 chip, which
is backward compatible with i.MX95. Set it to fall back to
"nxp,imx95-sysctr-timer".
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250407151340.2779124-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add compatible string "fsl,imx94-irqsteer" for the i.MX94 chip, which is
backward compatible with "fsl,imx-irqsteer".
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250407151552.2779343-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
This controller support scalable data lanes from 1 to 4. Add the
'data-lanes' property to configure the number of MIPI display panel lanes
selected for boards.
Change $ref of port@1 from 'port' to 'port-base' and add 'endpoint'
property referencing video-interfaces.yaml. Allow 'data-lanes' values
1, 2, 3, and 4 for port@1.
Fix below CHECK_DTB warnings:
arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33.dtb:
dsi@30a00000: ports:port@1:endpoint: Unevaluated properties are not allowed ('data-lanes' was unexpected)
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20250407150442.2778299-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
As I am leaving AMD and will no longer be maintaining
these platform drivers, so removing myself from maintainership.
Signed-off-by: Mubin Sayyed <mubin.sayyed@amd.com>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250403060836.2602361-1-mubin.sayyed@amd.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
- a brand new driver for touchpads and touchbars in newer Apple devices
- support for Berlin-A series in goodix-berlin touchscreen driver
- improvements to matrix_keypad driver to better handle GPIOs toggling
- assorted small cleanups in other input drivers.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZ/DJvwAKCRBAj56VGEWX
nIvGAQC9nGVCLQX7xO7saMfx5+4/jhkXgPTeDtRs59vNKIoEFAEAgW9DUKShtESV
WQlwkyzoRbAjC8suc2sc+bs4fJ60BQ0=
=xlqq
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a brand new driver for touchpads and touchbars in newer Apple devices
- support for Berlin-A series in goodix-berlin touchscreen driver
- improvements to matrix_keypad driver to better handle GPIOs toggling
- assorted small cleanups in other input drivers
* tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: goodix_berlin - add support for Berlin-A series
dt-bindings: input: goodix,gt9916: Document gt9897 compatible
dt-bindings: input: matrix_keypad - add wakeup-source property
dt-bindings: input: matrix_keypad - add missing property
Input: pm8941-pwrkey - fix dev_dbg() output in pm8941_pwrkey_irq()
Input: synaptics - hide unused smbus_pnp_ids[] array
Input: apple_z2 - fix potential confusion in Kconfig
Input: matrix_keypad - use fsleep for delays after activating columns
Input: matrix_keypad - add settle time after enabling all columns
dt-bindings: input: matrix_keypad: add settle time after enabling all columns
dt-bindings: input: matrix_keypad: convert to YAML
dt-bindings: input: Correct indentation and style in DTS example
MAINTAINERS: Add entries for Apple Z2 touchscreen driver
Input: apple_z2 - add a driver for Apple Z2 touchscreens
dt-bindings: input: touchscreen: Add Z2 controller
Input: Switch to use hrtimer_setup()
Input: drop vb2_ops_wait_prepare/finish
* The sub-architecture selection Kconfig system has been cleaned up,
the documentation has been improved, and various detections have been
fixed.
* The vector-related extensions dependencies are now validated when
parsing from device tree and in the DT bindings.
* Misaligned access probing can be overridden via a kernel command-line
parameter, along with various fixes to misalign access handling.
* Support for relocatable !MMU kernels builds.
* Support for hpge pfnmaps, which should improve TLB utilization.
* Support for runtime constants, which improves the d_hash()
performance.
* Support for bfloat16, Zicbom, Zaamo, Zalrsc, Zicntr, Zihpm.
* Various fixes, including:
- We were missing a secondary mmu notifier call when flushing the
tlb which is required for IOMMU.
- Fix ftrace panics by saving the registers as expected by ftrace.
- Fix a couple of stimecmp usage related to cpu hotplug.
- purgatory_start is now aligned as per the STVEC requirements.
- A fix for hugetlb when calculating the size of non-present PTEs.
-----BEGIN PGP SIGNATURE-----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=nCJo
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- The sub-architecture selection Kconfig system has been cleaned up,
the documentation has been improved, and various detections have been
fixed
- The vector-related extensions dependencies are now validated when
parsing from device tree and in the DT bindings
- Misaligned access probing can be overridden via a kernel command-line
parameter, along with various fixes to misalign access handling
- Support for relocatable !MMU kernels builds
- Support for hpge pfnmaps, which should improve TLB utilization
- Support for runtime constants, which improves the d_hash()
performance
- Support for bfloat16, Zicbom, Zaamo, Zalrsc, Zicntr, Zihpm
- Various fixes, including:
- We were missing a secondary mmu notifier call when flushing the
tlb which is required for IOMMU
- Fix ftrace panics by saving the registers as expected by ftrace
- Fix a couple of stimecmp usage related to cpu hotplug
- purgatory_start is now aligned as per the STVEC requirements
- A fix for hugetlb when calculating the size of non-present PTEs
* tag 'riscv-for-linus-6.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (65 commits)
riscv: Add norvc after .option arch in runtime const
riscv: Make sure toolchain supports zba before using zba instructions
riscv/purgatory: 4B align purgatory_start
riscv/kexec_file: Handle R_RISCV_64 in purgatory relocator
selftests: riscv: fix v_exec_initval_nolibc.c
riscv: Fix hugetlb retrieval of number of ptes in case of !present pte
riscv: print hartid on bringup
riscv: Add norvc after .option arch in runtime const
riscv: Remove CONFIG_PAGE_OFFSET
riscv: Support CONFIG_RELOCATABLE on riscv32
asm-generic: Always define Elf_Rel and Elf_Rela
riscv: Support CONFIG_RELOCATABLE on NOMMU
riscv: Allow NOMMU kernels to access all of RAM
riscv: Remove duplicate CONFIG_PAGE_OFFSET definition
RISC-V: errata: Use medany for relocatable builds
dt-bindings: riscv: document vector crypto requirements
dt-bindings: riscv: add vector sub-extension dependencies
dt-bindings: riscv: d requires f
RISC-V: add f & d extension validation checks
RISC-V: add vector crypto extension validation checks
...
Core:
- setdate is removed as it has better replacements
- skip alarms with a second resolution when we know the RTC doesn't support
those.
Subsystem:
- remove unnecessary private struct members
- use devm_pm_set_wake_irq were relevant
Drivers:
- ds1307: stop disabling alarms on probe for DS1337, DS1339, DS1341 and DS3231
- max31335: add max31331 support
- pcf50633 is removed as support for the related SoC has been removed
- pcf85063: properly handle POR failures
-----BEGIN PGP SIGNATURE-----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=QJeg
-----END PGP SIGNATURE-----
Merge tag 'rtc-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"We see a net reduction of the number of lines of code thanks to the
removal of a now unused driver and a testing tool that is not used
anymore. Apart from this, the max31335 driver gets support for a new
part number and pm8xxx gets UEFI support.
Core:
- setdate is removed as it has better replacements
- skip alarms with a second resolution when we know the RTC doesn't
support those.
Subsystem:
- remove unnecessary private struct members
- use devm_pm_set_wake_irq were relevant
Drivers:
- ds1307: stop disabling alarms on probe for DS1337, DS1339, DS1341
and DS3231
- max31335: add max31331 support
- pcf50633 is removed as support for the related SoC has been removed
- pcf85063: properly handle POR failures"
* tag 'rtc-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
rtc: remove 'setdate' test program
selftest: rtc: skip some tests if the alarm only supports minutes
rtc: mt6397: drop unused defines
rtc: pcf85063: replace dev_err+return with return dev_err_probe
rtc: pcf85063: do a SW reset if POR failed
rtc: max31335: Add driver support for max31331
dt-bindings: rtc: max31335: Add max31331 support
rtc: cros-ec: Avoid a couple of -Wflex-array-member-not-at-end warnings
dt-bindings: rtc: pcf2127: Reference spi-peripheral-props.yaml
rtc: rzn1: implement one-second accuracy for alarms
rtc: pcf50633: Remove
rtc: pm8xxx: implement qcom,no-alarm flag for non-HLOS owned alarm
rtc: pm8xxx: mitigate flash wear
rtc: pm8xxx: add support for uefi offset
dt-bindings: rtc: qcom-pm8xxx: document qcom,no-alarm flag
rtc: rv3032: drop WADA
rtc: rv3032: fix EERD location
rtc: pm8xxx: switch to devm_device_init_wakeup
rtc: pm8xxx: fix possible race condition
rtc: mpfs: switch to devm_device_init_wakeup
...
Here is the big set of USB and Thunderbolt driver updates for 6.15-rc1.
Included in here are:
- Thunderbolt driver and core api updates for new hardware and
features
- usb-storage const array cleanups
- typec driver updates
- dwc3 driver updates
- xhci driver updates and bugfixes
- small USB documentation updates
- usb cdns3 driver updates
- usb gadget driver updates
- other small driver updates and fixes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+2Zaw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynIgQCaAyMozdrZtTiOs1OcZEuTkoCtKrEAniqe0OiL
s7R6j2NoOIwo9d6hBsjh
=IH7I
-----END PGP SIGNATURE-----
Merge tag 'usb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
6.15-rc1. Included in here are:
- Thunderbolt driver and core api updates for new hardware and
features
- usb-storage const array cleanups
- typec driver updates
- dwc3 driver updates
- xhci driver updates and bugfixes
- small USB documentation updates
- usb cdns3 driver updates
- usb gadget driver updates
- other small driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (92 commits)
thunderbolt: Do not add non-active NVM if NVM upgrade is disabled for retimer
thunderbolt: Scan retimers after device router has been enumerated
usb: host: cdns3: forward lost power information to xhci
usb: host: xhci-plat: allow upper layers to signal power loss
usb: xhci: change xhci_resume() parameters to explicit the desired info
usb: cdns3-ti: run HW init at resume() if HW was reset
usb: cdns3-ti: move reg writes to separate function
usb: cdns3: call cdns_power_is_lost() only once in cdns_resume()
usb: cdns3: rename hibernated argument of role->resume() to lost_power
usb: xhci: tegra: rename `runtime` boolean to `is_auto_runtime`
usb: host: xhci-plat: mvebu: use ->quirks instead of ->init_quirk() func
usb: dwc3: Don't use %pK through printk
usb: core: Don't use %pK through printk
usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev()
dt-bindings: usb: qcom,dwc3: Synchronize minItems for interrupts and -names
usb: common: usb-conn-gpio: switch psy_cfg from of_node to fwnode
usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running
usb: xhci: Don't change the status of stalled TDs on failed Stop EP
xhci: Avoid queuing redundant Stop Endpoint command for stalled endpoint
xhci: Handle spurious events on Etron host isoc enpoints
...
Here is the big set of serial and tty driver updates for 6.15-rc1.
Include in here are the following:
- more great tty layer cleanups from Jiri. Someday this will be done,
but that's not going to be any year soon...
- kdb debug driver reverts to fix a reported issue
- lots of .dts binding updates for different devices with serial
devices
- lots of tiny updates and tweaks and a few bugfixes for different
serial drivers.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+2YPA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn2OQCgvxCyoeuNPuV4X89JdrgocMTMyTYAn15pGgDa
r7w9UDO/D7UqRnKEnFy+
=lJwK
-----END PGP SIGNATURE-----
Merge tag 'tty-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of serial and tty driver updates for 6.15-rc1.
Include in here are the following:
- more great tty layer cleanups from Jiri. Someday this will be done,
but that's not going to be any year soon...
- kdb debug driver reverts to fix a reported issue
- lots of .dts binding updates for different devices with serial
devices
- lots of tiny updates and tweaks and a few bugfixes for different
serial drivers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
tty: serial: fsl_lpuart: Fix unused variable 'sport' build warning
serial: stm32: do not deassert RS485 RTS GPIO prematurely
serial: 8250: add driver for NI UARTs
dt-bindings: serial: snps-dw-apb-uart: document RZ/N1 binding without DMA
serial: icom: fix code format problems
serial: sh-sci: Save and restore more registers
tty: serial: pl011: remove incorrect of_match_ptr annotation
dt-bindings: serial: snps-dw-apb-uart: Add support for rk3562
tty: serial: lpuart: only disable CTS instead of overwriting the whole UARTMODIR register
tty: caif: removed unused function debugfs_tx()
serial: 8250_dma: terminate correct DMA in tx_dma_flush()
tty: serial: fsl_lpuart: rename register variables more specifically
tty: serial: fsl_lpuart: use port struct directly to simply code
tty: serial: fsl_lpuart: Use u32 and u8 for register variables
tty: serial: fsl_lpuart: disable transmitter before changing RS485 related registers
tty: serial: 8250: Add Brainboxes XC devices
dt-bindings: serial: fsl-lpuart: support i.MX94
tty: serial: 8250: Add some more device IDs
dt-bindings: serial: samsung: add exynos7870-uart compatible
serial: 8250_dw: Comment possible corner cases in serial_out() implementation
...
