- A series from Alexander Stein that updates ls1021a-tqmals1021a device
tree mostly for display support inlcuding HDMI, LVDS and CDTech panel
- A change from Dario Binacchi to use pad config defines for i.MX23/28
device trees
- A i.MX7D change from Efe Can İçöz to include min and max voltage in
opp-microvolt
- A few patches from Fabio Estevam to fix dt-schema warnings
- A couple of changes from Krzysztof Kozlowski to align NAND and WIFI
node name with binings
- A clean-up change from Rob Herring to drop redundant CPU
"clock-latency"
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmghwGUUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6e6AgAudNxNY08NmcooFSWVc/b50X86M1n
zJUBlrgMQW6/C+JcjfqFSiPUa2tVjRXKQ0w3vyBfK5tXdPmWjxBK+It91fPCPHt6
U95diIs5RyrKuueTG4VBk1IEDQ7CO9CQueYezeAz7/ysv5kpDHLlLgFq0XZ1VrNK
RFfQjuU9ZWG5seV2Ji5D8FXT3JksTgXHSVZtV/qcjN2hDzs0wu0GwP4ShbuadZoW
TECM8GJbdHCv0A79litox8mkCK8+qmqXyU6SR4SXGVrIiuSWQkziB4VzoC6UbKfa
fWXpGmuCYZW5ohFxc4cKI/Bl+Fk0b6mbVfumM5tTwmUhtjOPHiP6Zsby3Q==
=OpE5
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmgh51AACgkQYKtH/8kJ
UieX4BAA2sLQ9hrV9iTJ6pw+/Pbu/785mGcZJcg7b/RGsXYVepVuxanEopQjbazQ
CFN1HJjEZ6RTM+9Ieu2dwDAsx/iCv1izMba2h3gh+Fcd2HjSaABNMiuoNPDNNxB+
mNGhKLVe7n/eGX2i5kDazscibpcliPOnrGgbZKKhkjOZXZMGFamwugSIiMvaDn8g
PSyQB/hZilM4n1yeFEo/dMA+70MtiMU+BtLuYpx8GDn09wmkDKPY6/bMVBPQyGCF
k+hs4AOoUJTmnZpBMOuMb4rKfL+T9hHCfw8k6fNzucv3vjLDxmflRoMpN4VrH8ZA
ho+kXYs2zlXdzRm1173zEt6fbNZ0po5ky9nyfJfQkEInH7RGfHlfZdqnuBIS6ZXN
w6cCKdIojoOtHNcsT1CSgH830ImdWfnoFQtyWdU4hQ8oxGNexbdW2FcN+8tb6yJw
M3ewczPrKN4i6ZZ2sJIotBDWPhtmdUb7Th1BwrJzxfVfmmdoDxweJ5BRILCrh7j/
5U0TwYO75tpzmDMgiPlRpyjSJxp/NcdIrA7dzTPLGdbfWlwWLpxssE6ICcaJ/6lR
EoAPkXqHUMxkiJOmgABtA+weflyeJtfmbouxAAfTuMW5FzDbJfibYCq62UUnt8Cl
MxvQG3ByqbwfPOtQA+CdyHUNl1787LdgG0SN8UWWv5cbSOgBUs8=
=4zTX
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree change for 6.16:
- A series from Alexander Stein that updates ls1021a-tqmals1021a device
tree mostly for display support inlcuding HDMI, LVDS and CDTech panel
- A change from Dario Binacchi to use pad config defines for i.MX23/28
device trees
- A i.MX7D change from Efe Can İçöz to include min and max voltage in
opp-microvolt
- A few patches from Fabio Estevam to fix dt-schema warnings
- A couple of changes from Krzysztof Kozlowski to align NAND and WIFI
node name with binings
- A clean-up change from Rob Herring to drop redundant CPU
"clock-latency"
* tag 'imx-dt-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: mxs: use padconfig macros
ARM: dts: imx7d: update opp-table voltages
ARM: dts: nxp: Align wifi node name with bindings
ARM: dts: imx6q-apalis: remove pcie-switch node
ARM: dts: ls1021a-tqmals1021a: change sound card model name
ARM: dts: ls1021a-tqmals1021a: Add overlay for CDTech DC44 RGB display
ARM: dts: ls1021a-tqmals1021a: Add overlay for CDTech FC21 RGB display
ARM: dts: ls1021a-tqmals1021a: Add LVDS overlay for Tianma TM070JVGH33
ARM: dts: ls1021a-tqmals1021a: Add HDMI overlay
ARM: dts: ls1021a-tqmals1021a: Add vcc-supply for spi-nor
ARM: dts: ls1021a-tqmals1021a: Fix license
ARM: dts: imx: Drop redundant CPU "clock-latency"
ARM: dts: imx51-digi-connectcore-som: Fix MMA7455 compatible
ARM: dts: nxp: Align NAND controller node name with bindings
ARM: dts: imx: Fix the iim compatible string
ARM: dts: imx31/imx6: Use flash as the NOR node name
Link: https://lore.kernel.org/r/20250512103858.50501-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use standard names for the APBDMA controller device tree nodes, add
support for the ASUS Transformer Pad LTE TF300TL and clean up the Apalis
evaluation board by removing the unused pcie-switch node.
-----BEGIN PGP SIGNATURE-----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=yI6+
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=mzR8
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.16-arm-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Device tree changes for v6.16-rc1
Use standard names for the APBDMA controller device tree nodes, add
support for the ASUS Transformer Pad LTE TF300TL and clean up the Apalis
evaluation board by removing the unused pcie-switch node.
* tag 'tegra-for-6.16-arm-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: apalis-eval: Remove pcie-switch node
ARM: tegra: Add device-tree for ASUS Transformer Pad LTE TF300TL
ARM: tegra: Rename the apbdma nodename to match with common dma-controller binding
Link: https://lore.kernel.org/r/20250509212604.2849901-2-treding@nvidia.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 6.16, please pull the following:
- Arthur adds a pinctrl node for BCM21664 and updates BCM23550 to use
it, he also drops the DTS file for the BCM59056 PMU chip and leaving
that board level DTS files
- Stefan documents and adds support for the Raspberry Pi 2 2nd revision.
-----BEGIN PGP SIGNATURE-----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=UBkl
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Z7eF
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.16/devicetree' of https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM-based SoC Device Tree changes
for 6.16, please pull the following:
- Arthur adds a pinctrl node for BCM21664 and updates BCM23550 to use
it, he also drops the DTS file for the BCM59056 PMU chip and leaving
that board level DTS files
- Stefan documents and adds support for the Raspberry Pi 2 2nd revision.
* tag 'arm-soc/for-6.16/devicetree' of https://github.com/Broadcom/stblinux:
arm64: dts: bcm: Add reference to RPi 2 (2nd rev)
ARM: dts: bcm: Add support for Raspberry Pi 2 (2nd rev)
dt-bindings: arm: bcm2835: Add Raspberry Pi 2 (2nd rev)
ARM: dts: Drop DTS for BCM59056 PMU
ARM: dts: bcm2166x: Add bcm2166x-pinctrl DTSI
ARM: dts: bcm2166x-common: Add pinctrl node
Link: https://lore.kernel.org/r/20250505165810.1948927-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add CANFD support for the RZ/G3E SoC and the RZ/G3E SMARC Carrier-II
EVK development board,
- Add support for Ethernet port A, 9-pin D-sub serial, and USB on the
RZN1D-DB and RZN1D-EB development and expansion boards,
- Add sound support for the Retronix Sparrow Hawk board,
- Add General PWM Timer (GPT) support for the RZ/G2L and RZ/V2L SoCs
and SMARC EVK boards,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCaB4GlwAKCRCKwlD9ZEnx
cLOfAQCFoWcQhJYFmb35RQLZ3s7XmlFQlsWG9dT+ouaHwimRugEAp6jE8W2ic1yy
HShotgcw4UN9e4jNq/UjmY9GJwK9KgY=
=GZb/
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=yRxl
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v6.16-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.16 (take two)
- Add CANFD support for the RZ/G3E SoC and the RZ/G3E SMARC Carrier-II
EVK development board,
- Add support for Ethernet port A, 9-pin D-sub serial, and USB on the
RZN1D-DB and RZN1D-EB development and expansion boards,
- Add sound support for the Retronix Sparrow Hawk board,
- Add General PWM Timer (GPT) support for the RZ/G2L and RZ/V2L SoCs
and SMARC EVK boards,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.16-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: dts: renesas: r9a06g032-rzn1d400-eb: Enable USB host port
ARM: dts: renesas: r9a06g032-rzn1d400-db: Add pinmux for the CPLD
arm64: dts: renesas: white-hawk-single: Improve Ethernet TSN description
ARM: dts: renesas: r9a06g032-rzn1d400-db: Enable USB device port
ARM: dts: renesas: r9a06g032-rzn1d400-eb: Describe 9-pin D-sub serial port
arm64: dts: renesas: beacon-renesom: Align wifi node name with bindings
arm64: dts: renesas: rzg2l-smarc: Enable GPT on carrier board
arm64: dts: renesas: r9a07g054: Add GPT support
arm64: dts: renesas: r9a07g044: Add GPT support
arm64: dts: renesas: sparrow-hawk: Add MSIOF Sound support
ARM: dts: renesas: r9a06g032-rzn1d400-eb: Add GMAC1 port
arm64: dts: renesas: r9a09g047e57-smarc: Enable CAN Transceiver
arm64: dts: renesas: r9a09g047e57-smarc: Enable CANFD
arm64: dts: renesas: r9a09g047: Add CANFD node
Link: https://lore.kernel.org/r/cover.1746798755.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add SDHI, ICU, I2C, PMIC, and GPU support on the RZ/G3E SoC and the
RZ/G3E SoM and SMARC Carrier-II EVK development board,
- Add internal SDHI regulator support on the RZ/V2H(P) SoC,
- Add UFS tuning parameters in E-FUSE on the R-Car S4-8 ES1.2 SoC,
- Add support for Ethernet ports C and D, I2C, keys, and SDHI on the
RZ/N1D SoC and the RZN1D-DB and RZN1D-EB development and expansion
boards,
- Add initial support for the RZ/V2N (R9A09G056) and the RZ/V2N EVK
board,
- Add support for the Retronix Sparrow Hawk board, which is based on
R-Car V4H ES3.0,
- Add ISP core support on R-Car V3U, V4H, and V4M,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCaAtk+QAKCRCKwlD9ZEnx
cPhbAQDUvBdFFN8qHsr6dFmEnUw+iQSqW0l+Rtc9E3Lw/lB2qAD+PB34sVcOnuOi
hBP0ty3219WF8KYaAx1jOfJqA0doFQ8=
=whxP
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=aTIg
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v6.16-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.16
- Add SDHI, ICU, I2C, PMIC, and GPU support on the RZ/G3E SoC and the
RZ/G3E SoM and SMARC Carrier-II EVK development board,
- Add internal SDHI regulator support on the RZ/V2H(P) SoC,
- Add UFS tuning parameters in E-FUSE on the R-Car S4-8 ES1.2 SoC,
- Add support for Ethernet ports C and D, I2C, keys, and SDHI on the
RZ/N1D SoC and the RZN1D-DB and RZN1D-EB development and expansion
boards,
- Add initial support for the RZ/V2N (R9A09G056) and the RZ/V2N EVK
board,
- Add support for the Retronix Sparrow Hawk board, which is based on
R-Car V4H ES3.0,
- Add ISP core support on R-Car V3U, V4H, and V4M,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.16-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (29 commits)
arm64: dts: renesas: r8a779h0: Add ISP core function block
arm64: dts: renesas: r8a779g0: Add ISP core function block
arm64: dts: renesas: r8a779a0: Add ISP core function block
arm64: dts: renesas: r8a779g3: Add Retronix R-Car V4H Sparrow Hawk board support
arm64: dts: renesas: rzg3e-smarc-som: Enable Mali-G52
arm64: dts: renesas: r9a09g047: Add Mali-G52 GPU node
arm64: dts: renesas: rzg3e-smarc-som: Add RAA215300 pmic support
arm64: dts: renesas: rzg3e-smarc-som: Add I2C2 device pincontrol
ARM: dts: renesas: r9a06g032-rzn1d400-eb: describe SD card port
ARM: dts: renesas: r9a06g032: Describe SDHCI controllers
arm64: dts: renesas: Add initial device tree for RZ/V2N EVK
arm64: dts: renesas: Add initial SoC DTSI for RZ/V2N
dt-bindings: pinctrl: renesas: Document RZ/V2N SoC
dt-bindings: clock: renesas: Document RZ/V2N SoC CPG
dt-bindings: soc: renesas: Document SYS for RZ/V2N SoC
dt-bindings: soc: renesas: Document Renesas RZ/V2N SoC variants and EVK
ARM: dts: renesas: r9a06g032-rzn1d400-db: Describe keys
ARM: dts: renesas: r9a06g032-rzn1d400-eb: Describe I2C bus
ARM: dts: renesas: r9a06g032-rzn1d400-db: Describe I2C bus
ARM: dts: renesas: r9a06g032: Describe I2C controllers
...
Link: https://lore.kernel.org/r/cover.1745582596.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Convert mx2{3,8} dts files to use the padconfig macros defined in
mxs-pinfunc.h.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Update accepted voltage levels according to IMX7DCEC Table 9 Operating ranges
Signed-off-by: Efe Can İçöz <efecanicoz@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Since commit 3c3606793f ("dt-bindings: wireless: bcm4329-fmac: Use
wireless-controller.yaml schema"), bindings expect 'wifi' as node name:
imx7d-remarkable2.dtb: bcrmf@1: $nodename:0: 'bcrmf@1' does not match '^wifi(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The compatible "plx,pex8605" does not exist, there is no DT binding for
it and there was never a driver matching this compatible, remove it.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20250410063919.11199-1-francesco@dolcini.it
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add device-tree for ASUS Transformer Pad LTE TF300TL, which is NVIDIA
Tegra30-based tablet device.
Co-developed-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250503102950.32744-4-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
Rename the apbdma nodename from "dma@" to "dma-controller@" to align with
linux common dma-controller binding.
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20250507-nvidea-dma-v4-1-6161a8de376f@gmail.com
[treding@nvidia.com: adjust subject prefix for consistency]
Signed-off-by: Thierry Reding <treding@nvidia.com>
The CPLD has no dedicated driver, so apply the pinmux settings with the
pinmux driver instead.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250508074311.20343-5-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
A simple CTS/RTS capable UART on a good old D-sub connector.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250424102805.22803-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This port bypasses the switch and is directly connected to the GMAC.
Co-developed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250414100206.7185-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The Raspberry Pi 2 (2nd rev) has the BCM2837 SoC instead of the
BCM2836. Except of this the configuration of the board is same
as the predecessor (no WLAN, no BT).
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250418143307.59235-3-wahrenst@gmx.net
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
This reverts commit 1580ccb6ed.
The HSYNC/VSYNC polarity of rk3036 HDMI are controlled by GRF.
Without the polarity configuration in GRF, it can be observed from
the HDMI protocol analyzer that the H/V front/back timing output
by RK3036 HDMI are currently not in line with the specifications.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3036-kylin
Link: https://lore.kernel.org/r/20250422070455.432666-7-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The RK3036 HDMI DDC bus requires it's PHY's reference clock to be
enabled first before normal DDC communication can be carried out.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3036-kylin
Link: https://lore.kernel.org/r/20250422070455.432666-6-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Bluetooth is available on the other Panda board versions, too, so move
stuff to common and specify the needed clock properly.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20250427052735.88133-3-andreas@kemnade.info
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The Pandaboard needs a 32k clock in the TWL6030 to be enabled
for Wifi to work.
With some luck, it is enabled by some U-Boot fork.
Do not rely on it and properly specify the requirement.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20250427052735.88133-2-andreas@kemnade.info
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The "clock-latency" property is part of the deprecated opp-v1 binding
and is redundant if the opp-v2 table has equal or larger values in any
"clock-latency-ns". Add any missing "clock-latency-ns" properties and
remove "clock-latency".
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250410-dt-cpu-schema-v2-10-63d7dc9ddd0a@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The compatible "plx,pex8605" does not exist, there is no DT binding for
it and there was never a driver matching this compatible, remove it.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The card name for ALSA is generated from the model name string and
is limited to 16 characters. Use a shorter name to prevent cutting the
name.
MBLS1021A uses the same audio codec as most i.MX based starter kits
by TQ-Systems. Adjust the sound card model to i.MX based platforms,
as done by commit e6303798b6 ("arm64: dts: imx8mp-tqma8mpql-mba8mpxl:
change sound card model name"). This allows sharing a default asound.conf
in BSP over all the kits.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds an overlay for the supported RGB display CDTech DC44.
DCU graphics chain is configured accordingly.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds an overlay for the supported RGB display CDTech FC21.
DCU graphics chain is configured accordingly.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds an overlay for the supported LVDS display tianma tm070jvhg33.
The on-board RGB-to-LVDS encoder and DCU graphics chain are configured
accordingly. Add power supply as well, which had been missing all the time.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This add an overlay for using the RGB-to-HDMI bridge.
Note: As DDC is directly connected to general I2C bus, there might be I2C
address conflicts. Hence not all displays might work.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
(Q)SPI NOR flash is supplied by 3.3V. Add the corresponding supply.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
With commit 784bdc6f26 ("ARM: dts: ls1021a: change to use SPDX
identifiers") the SoC .dtsi specifies the license using SPDX tags.
Fix license according to the ls1021a.dtsi this platform DT files
are based on.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The "clock-latency" property is part of the deprecated opp-v1 binding
and is redundant if the opp-v2 table has equal or larger values in any
"clock-latency-ns". The OPP tables have values of 150000, so it can be
removed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The "fsl,mma7455l" compatible string is not documented anywhere.
MMA7455L is the exact same device as the MMA7455, with the exception that
it is lead-free. Use the documented compatible string.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Per imx-iim.yaml, the compatible string should only contain a single
entry.
Change it accordingly to fix the following dt-schema warnings:
efuse@83f98000: compatible: ['fsl,imx51-iim', 'fsl,imx27-iim', 'syscon'] is too long
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to mtd-physmap.yaml, 'nor' is not a valid node name.
Change it to 'flash' to fix the following dt-schema warning:
nor@0,0: $nodename:0: 'nor@0,0' does not match '^(flash|.*sram|nand)(@.*)?$'
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The keys are connected to the I2C GPIO extender which has the interrupt
pin not connected. So, we need to poll.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250328153134.2881-12-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
