region->end is defined as an upper bound of the requested address range,
exclusive --- i.e. as an address outside of the range in which the
requested CSR is to be placed.
Hence 0x0001,0000,0000,0000 is the biggest valid region->end, not
0x0000,ffff,ffff,fffc like the current check asserted.
For simplicity, the fix drops the region->end & 3 test because there is
no actual problem with these bits set in region->end. The allocated
address range will be quadlet aligned and of a size of multiple quadlets
due to the checks for region->start & 3 and handler->length & 3 alone.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
This extends the FW_CDEV_IOC_SEND_PHY_PACKET ioctl() for /dev/fw* to be
useful for ping time measurements. One application for it would be gap
count optimization in userspace that is based on ping times rather than
hop count. (The latter is implemented in firewire-core itself but is
not applicable to beta PHYs that act as repeater.)
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Add an FW_CDEV_IOC_RECEIVE_PHY_PACKETS ioctl() and
FW_CDEV_EVENT_PHY_PACKET_RECEIVED poll()/read() event for /dev/fw*.
This can be used to get information from remote PHYs by remote access
PHY packets.
This is also the 2nd half of the functionality (the receive part) to
support a userspace implementation of a VersaPHY transaction layer.
Safety considerations:
- PHY packets are generally broadcasts, hence some kind of elevated
privileges should be required of a process to be able to listen in
on PHY packets. This implementation assumes that a process that is
allowed to open the /dev/fw* of a local node does have this
privilege.
There was an inconclusive discussion about introducing POSIX
capabilities as a means to check for user privileges for these
kinds of operations.
Other limitations:
- PHY packet reception may be switched on by ioctl() but cannot be
switched off again. It would be trivial to provide an off switch,
but this is not worth the code. The client should simply close()
the fd then, or just ignore further events.
- For sake of simplicity of API and kernel-side implementation, no
filter per packet content is provided.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Add an FW_CDEV_IOC_SEND_PHY_PACKET ioctl() for /dev/fw* which can be
used to implement bus management related functionality in userspace.
This is also half of the functionality (the transmit part) that is
needed to support a userspace implementation of a VersaPHY transaction
layer.
Safety considerations:
- PHY packets are generally broadcasts and may have interesting
effects on PHYs and the bus, e.g. make asynchronous arbitration
impossible due to too low gap count. Hence some kind of elevated
privileges should be required of a process to be able to send
PHY packets. This implementation assumes that a process that is
allowed to open the /dev/fw* of a local node does have this
privilege.
There was an inconclusive discussion about introducing POSIX
capabilities as a means to check for user privileges for these
kinds of operations.
- The kernel does not check integrity of the supplied packet data.
That would be far too much code, considering the many kinds of
PHY packets. A process which got the privilege to send these
packets is trusted to do it correctly.
Just like with the other "send packet" ioctls, a non-blocking API is
chosen; i.e. the ioctl may return even before AT DMA started. After
transmission, an event for poll()/read() is enqueued. Most users are
going to need a blocking API, but a blocking userspace wrapper is easy
to implement, and the second of the two existing libraw1394 calls
raw1394_phy_packet_write() and raw1394_start_phy_packet_write() can be
better supported that way.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Response events:
- are generated on more occasions than their documentation claimed.
CSR allocation:
- An already occupied CSR can be determined from errno==EBUSY.
Bus resets:
- Note that FW_CDEV_IOC_INITIATE_BUS_RESET is nonblocking and that the
client is not required to observe a grace period since kernels
2.6.36+ will enforce it now (commit 02d37bed).
- The possible values of fw_cdev_initiate_bus_reset.type are listed in
the kerneldoc comment already.
- Clarify that an application that uses FW_CDEV_IOC_ADD_DESCRIPTOR and
FW_CDEV_IOC_REMOVE_DESCRIPTOR does not have to issue a bus reset.
Isochronous I/O contexts:
- At most one can be created per open file descriptor.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
core-transaction.c transmit_complete_callback() and close_transaction()
expect packet callback status to be an ACK or RCODE, and ACKs get
translated to RCODEs for transaction callbacks.
An old comment on the packet callback API (been there from the initial
submission of the stack) and the dummy_driver implementation of
send_request/send_response deviated from this as they also included
-ERRNO in the range of status values.
Let's narrow status values down to ACK and RCODE to prevent surprises.
RCODE_CANCELLED is chosen as the dummy_driver's RCODE as its meaning of
"transaction timed out" comes closest to what happens when a transaction
coincides with card removal.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
proto->unique_tuple() will be called finally, if the previous calls fail. This
patch checks the false condition of (range->flags &IP_NAT_RANGE_PROTO_RANDOM)
instead to avoid duplicate line of code: proto->unique_tuple().
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Workqueue can now handle high concurrency. Convert gfs to use
workqueue instead of slow-work.
* Steven pointed out that recovery path might be run from allocation
path and thus requires forward progress guarantee without memory
allocation. Create and use gfs_recovery_wq with rescuer. Please
note that forward progress wasn't guaranteed with slow-work.
* Updated to use non-reentrant workqueue.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
In some situations a CPU match permits a better spreading of
connections, or select targets only for a given cpu.
With Remote Packet Steering or multiqueue NIC and appropriate IRQ
affinities, we can distribute trafic on available cpus, per session.
(all RX packets for a given flow is handled by a given cpu)
Some legacy applications being not SMP friendly, one way to scale a
server is to run multiple copies of them.
Instead of randomly choosing an instance, we can use the cpu number as a
key so that softirq handler for a whole instance is running on a single
cpu, maximizing cache effects in TCP/UDP stacks.
Using NAT for example, a four ways machine might run four copies of
server application, using a separate listening port for each instance,
but still presenting an unique external port :
iptables -t nat -A PREROUTING -p tcp --dport 80 -m cpu --cpu 0 \
-j REDIRECT --to-port 8080
iptables -t nat -A PREROUTING -p tcp --dport 80 -m cpu --cpu 1 \
-j REDIRECT --to-port 8081
iptables -t nat -A PREROUTING -p tcp --dport 80 -m cpu --cpu 2 \
-j REDIRECT --to-port 8082
iptables -t nat -A PREROUTING -p tcp --dport 80 -m cpu --cpu 3 \
-j REDIRECT --to-port 8083
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
hpet_disable is called unconditionally on machine reboot if hpet support
is compiled in the kernel.
hpet_disable only checks if the machine is hpet capable but doesn't make
sure that hpet has been initialized.
[ tglx: Made it a one liner and removed the redundant hpet_address check ]
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Venkatesh Pallipadi <venki@google.com>
LKML-Reference: <alpine.DEB.2.00.1007211726240.22235@kaball-desktop>
Cc: stable@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
data=writeback mode is dangerous as it leads to higher data loss and stale data
exposure when systems crash. It should not be the default, especially when all
major distros ensure their ext3 filesystems default to ordered mode. Change the
default mode to the safer data=ordered mode, because we should be caring far
more about avoiding stale data exposure than performance.
CC: linux-ext4@vger.kernel.org
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Acked-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Quota code never touches file data. It just modifies i_blocks + i_bytes
of inodes and inode flags of quota files. So use mark_inode_dirty_sync
instead of mark_inode_dirty.
Signed-off-by: Jan Kara <jack@suse.cz>
Use nf_conntrack/nf_nat code to do the packet mangling and the TCP
sequence adjusting. The function 'ip_vs_skb_replace' is now dead
code, so it is removed.
To SNAT FTP, use something like:
% iptables -t nat -A POSTROUTING -m ipvs --vaddr 192.168.100.30/32 \
--vport 21 -j SNAT --to-source 192.168.10.10
and for the data connections in passive mode:
% iptables -t nat -A POSTROUTING -m ipvs --vaddr 192.168.100.30/32 \
--vportctl 21 -j SNAT --to-source 192.168.10.10
using '-m state --state RELATED' would also works.
Make sure the kernel modules ip_vs_ftp, nf_conntrack_ftp, and
nf_nat_ftp are loaded.
[ up-port and minor fixes by Simon Horman <horms@verge.net.au> ]
Signed-off-by: Hannes Eder <heder@google.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Update the nf_conntrack tuple in reply direction, as we will see
traffic from the real server (RIP) to the client (CIP). Once this is
done we can use netfilters SNAT in POSTROUTING, especially with
xt_ipvs, to do source NAT, e.g.:
% iptables -t nat -A POSTROUTING -m ipvs --vaddr 192.168.100.30/32 --vport 80 \
-j SNAT --to-source 192.168.10.10
[ minor fixes by Simon Horman <horms@verge.net.au> ]
Signed-off-by: Hannes Eder <heder@google.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Patrick McHardy <kaber@trash.net>
This implements the kernel-space side of the netfilter matcher xt_ipvs.
[ minor fixes by Simon Horman <horms@verge.net.au> ]
Signed-off-by: Hannes Eder <heder@google.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
[ Patrick: added xt_ipvs.h to Kbuild ]
Signed-off-by: Patrick McHardy <kaber@trash.net>
nconfig segfaults when help text contains the character '%'. For a quick
example, navigate to the kernel compression options and get the help for
bzip2. Doing so triggers a call to mvwprintw() with a string containing
'%' and no extra arguments to fill in the specifier's value. Fix this
case by printing the literal string retrieved from the kconfig.
#0 0x00002b52b6b11d83 in vfprintf () from /lib/libc.so.6
#1 0x00002b52b6bad010 in __vsnprintf_chk () from /lib/libc.so.6
#2 0x00002b52b623991b in _nc_printf_string () from
/lib/libncursesw.so.5
#3 0x00002b52b6234cff in vwprintw () from /lib/libncursesw.so.5
#4 0x00002b52b6234db9 in mvwprintw () from /lib/libncursesw.so.5
#5 0x00000000004151d8 in fill_window (win=0x21b64c0,
text=0x21b62b0 "CONFIG_KERNEL_BZIP2:\n\nIts compression ratio and
speed is intermediate.\nDecompression speed is slowest among the
three. The kernel\nsize is about 10% smaller with bzip2, in
comparison to gzip.\nBzip2 us"...)
at scripts/kconfig/nconf.gui.c:229
#6 0x0000000000416335 in show_scroll_win (main_window=0x21a5630,
title=0x157fa30 "Bzip2",
text=0x21b62b0 "CONFIG_KERNEL_BZIP2:\n\nIts compression
ratio and speed is intermediate.\nDecompression speed is
slowest among the three. The kernel\nsize is about 10%
smaller with bzip2, in comparison to gzip.\nBzip2 us"...)
at scripts/kconfig/nconf.gui.c:535
#7 0x00000000004055b2 in show_help (menu=0x157f9d0)
at scripts/kconfig/nconf.c:1257
#8 0x0000000000405897 in conf_choice (menu=0x157f130)
at scripts/kconfig/nconf.c:1321
#9 0x0000000000405326 in conf (menu=0x157d130) at
scripts/kconfig/nconf.c:1208
#10 0x00000000004052e8 in conf (menu=0xb434a0) at
scripts/kconfig/nconf.c:1203
#11 0x0000000000406092 in main (ac=2, av=0x7fff96a93c38)
Cc: Michal Marek <mmarek@suse.cz>
Cc: Nir Tzachar <nir.tzachar@gmail.com>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
HeadPhone Playback Volume control register of DA7210 has
reserved area. This patch considered it as mute.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
These are a couple smatch issues. In the original code, if only one of
the allocation fails we leak the other variable so we should goto
out_free_mem.
Also there was a use after free if debugging was enabled and so I moved
the kfree() down a line.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
In no-direct mapping, we mark sp is 'direct' when we mapping the
guest's larger page, but its access is encoded form upper page-struct
entire not include the last mapping, it will cause access conflict.
For example, have this mapping:
[W]
/ PDE1 -> |---|
P[W] | | LPA
\ PDE2 -> |---|
[R]
P have two children, PDE1 and PDE2, both PDE1 and PDE2 mapping the
same lage page(LPA). The P's access is WR, PDE1's access is WR,
PDE2's access is RO(just consider read-write permissions here)
When guest access PDE1, we will create a direct sp for LPA, the sp's
access is from P, is W, then we will mark the ptes is W in this sp.
Then, guest access PDE2, we will find LPA's shadow page, is the same as
PDE's, and mark the ptes is RO.
So, if guest access PDE1, the incorrect #PF is occured.
Fixed by encode the last mapping access into direct shadow page
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The .data..init_task output section was missing
a load offset causing a popwerpc target to fail to boot.
Sean MacLennan tracked it down to the definition of
INIT_TASK_DATA_SECTION().
There are only two users of INIT_TASK_DATA_SECTION()
in the kernel today: cris and popwerpc.
cris do not support relocatable kernels and is thus not
impacted by this change.
Fix INIT_TASK_DATA_SECTION() to specify load offset like
all other output sections.
Reported-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Oooops... we missed these. We incorrectly converted strings
used when parsing the device-tree on pseries, thus breaking
access to drconf memory and hotplug memory.
While at it, also revert some variable names that represent
something the FW calls "lmb" and thus don't need to be converted
to "memblock".
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
This adds some debug output to our MMU hash code to print out some
useful debug data if the hypervisor refuses the insertion (which
should normally never happen).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
There's a couple of nasty bugs lurking in our huge page hashing code.
First, we don't check the access permission atomically with setting
the _PAGE_BUSY bit, which means that the PTE value we end up using
for the hashing might be different than the one we have checked
the access permissions for.
We've seen cases where that leads us to try to use an invalidated
PTE for hashing, causing all sort of "interesting" issues.
Then, we also failed to set _PAGE_DIRTY on a write access.
Finally, a minor tweak but we should return 0 when we find the
PTE busy, in order to just re-execute the access, rather than 1
which means going to do_page_fault().
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
This forces nilfs to check compatibility of feature flags so as to
reject a filesystem with unknown features when it mounts or remounts
the filesystem.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This adds three new fields to nilfs_super_block structure, compatible
feature set, readonly-compatible feature set, and incompatible feature
set in order to prepare for future disk format modifications.
The role of these fields conforms to those of ext3 or other
filesystems. Most important flags are the incompatible feature set;
it is used to refuse to mount the filesystem which sets an
incompatible feature the kernel doesn't know about.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This inserts comments indicating hexadecimal offset in declaration of
nilfs_super_block structure so that people can know offset of its
fields without counting from the head.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This applies read-ahead to nilfs_btree_do_lookup and
nilfs_btree_lookup_contig functions and extends them to read ahead
siblings of level 1 btree nodes that hold data blocks.
At present, the read-ahead is not applied to most btree operations;
only get_block() callback function, which is used during read of
regular files or directories, receives the benefit.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
nilfs_btree_get_block() now may return untested buffer due to
read-ahead. This adds a new flag for buffer heads so that the btree
code can check whether the buffer is already verified or not.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This adds __nilfs_btree_get_block() function that can issue a series
of read-ahead requests for sibling btree nodes.
This read-ahead needs parent node block, so nilfs_btree_readahead_info
structure is added to pass the information that
__nilfs_btree_get_block() needs.
This also replaces the previous nilfs_btree_get_block() implementation
with a wrapper function of __nilfs_btree_get_block().
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This adds mode argument to nilfs_btnode_submit_block() function and
allows it to issue a read-ahead request.
An optional submit_ptr argument is also added to store the actual
block address for which bio is sent. submit_ptr is used for a series
of read-ahead requests, and helps to decide if each requested block is
continous to the previous one on disk.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
nilfs_btnode_submit_block() refers to buffer head just before
returning from the function, but it releases the buffer head earlier
than that if nilfs_dat_translate() gets an error.
This has potential for oops in the erroneous case. This fixes the
issue.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This removes all inline uses from btree.c. Gcc now agressively apply
inline expansion even for the functions declared without the keyword;
the inline use in btree.c looks excessive.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
The patch "reduce repetitive calculation of max number of child nodes"
gathered up the calculation of maximum number of child nodes into
nilfs_btree_nchildren_per_block() function. This makes the function
get resultant value from a private variable in bmap object instead of
calculating it for each call.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
The current btree implementation repeats the same calculation on the
maximum number of child nodes. This is because a few low level
routines use the calculation for index addressing in a btree node
block.
This reduces the calculation by explicitly passing the maximum number
of child nodes (ncmax) through their argument.
This changes parameter passing of the following functions:
- nilfs_btree_node_dptrs
- nilfs_btree_node_get_ptr
- nilfs_btree_node_set_ptr
- nilfs_btree_node_init
- nilfs_btree_node_move_left
- nilfs_btree_node_move_right
- nilfs_btree_node_insert
- nilfs_btree_node_delete, and
- nilfs_btree_get_node
The following functions are removed:
- nilfs_btree_node_nchildren_min
- nilfs_btree_node_nchildren_max
Most middle level btree operations are rewritten to pass a proper
ncmax value depending on whether each occurrence of node is "root" or
not.
A constant NILFS_BTREE_ROOT_NCHILDREN_MAX is used for the root node,
whereas nilfs_btree_nchildren_per_block() function is used for
non-root nodes. If a node could be either root or a non-root node, an
output argument of nilfs_btree_get_node() is used to set up ncmax.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
nilfs_btree_node_nchildren_max() and nilfs_btree_node_nchildren_min()
functions switch return value depending on whether target node is the
root or a node block. In most uses of these functions, however, the
node type is fixed, and moreover the same calculation is repeatedly
performed in loop.
This unfold these functions depending on context and move them outside
loops wherever possible.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
nilfs_bmap_lookup and its variants are supposed to take a valid
pointer argument to return a block address, thus pointer checks in
nilfs_btree_lookup and nilfs_direct_lookup are needless.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This removes nilfs_bmap_union and finally unifies three structures and
the union in bmap/btree code into one.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This unifies two similar functions nilfs_btree_set_target_v and
nilfs_direct_set_target_v into one, nilfs_bmap_set_target_v.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This replaces all uses of nilfs_btree struct in implementation of
btree mapping with nilfs_bmap struct.
Name of local variable "btree" is kept not to bloat amount of change.
And, a part of local variables "bmap" is renamed to "btree" to uniform
naming rule.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This replaces all uses of nilfs_direct struct in implementation of
direct mapping with nilfs_bmap struct.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
The first argument of bops->bop_propagate operation takes a constant
qualifier, and causes compilation error when removed cast to pointer
of nilfs_btree structure type. This fixes the issue to prepare for
succesive removal of nilfs_btree struct.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Will remove nilfs_bmap_key_to_dkey(), nilfs_bmap_dkey_to_key(),
nilfs_bmap_ptr_to_dptr(), and nilfs_bmap_dptr_to_ptr() for simplicity.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This inserts sanity checks soon after read btree node from disk. This
allows early detection of broken btree nodes, and helps to narrow down
problems due to file system corruption.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
According to the report titled "problem with nilfs_cleanerd" from
Łukasz Wójcicki, nilfs_btree_lookup_dirty_buffers or
nilfs_btree_add_dirty_buffer got memory violation during garbage
collection.
This could happen if a level field of given btree node buffer is
incorrect, which is a crucial internal bug.
This inserts a sanity check to figure out the problem.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This adds is_remount argument to the parse_options() function that
obtains mount options from strings.
Previously, parse_options did not distinguish context whether it's
called for a new mount or remount, so the caller needed additional
verifications outside the function.
This allows parse_options to verify options and print messages
depending on the context.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>