Commit graph

209,989 commits

Author SHA1 Message Date
Wolfram Sang
8f85c0af23 i2c/mpc: Drop NO_IRQ
Drop NO_IRQ as 0 is the preferred way to describe 'no irq'
(http://lkml.org/lkml/2005/11/21/221). This change is safe, as the driver is
only used on powerpc, where NO_IRQ is 0 anyhow.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06 16:49:26 +10:00
Martyn Welch
7cad197849 powerpc: Correct parport interrupt parsing
Currently the parsing of the device tree in
arch/powerpc/include/asm/parport.h assumes that the interrupt provided in
the parallel port node is a valid virtual irq. The values for the
interrupts provided in the device tree should have meaning in the context
of the driver for the specific interrupt controller to which the interrupt
is connected and irq_of_parse_and_map() should be used to determine the
correct virtual irq.

Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06 16:49:26 +10:00
Benjamin Herrenschmidt
75c1d539ea powerpc: Fix CONFIG_DEBUG_PAGEALLOC on 603/e300
So we tried to speed things up a bit using flush_hash_pages() directly
but that falls over on 603 of course meaning we fail to flush the TLB
properly and we may even end up having it corrupt memory randomly by
accessing a hash table that doesn't exist.

This removes the "optimization" by always going through flush_tlb_page()
for now at least.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06 16:49:26 +10:00
Michael Neuling
aef40e87d8 powerpc/pseries: Only call start-cpu when a CPU is stopped
Currently we always call start-cpu irrespective of if the CPU is
stopped or not. Unfortunatley on POWER7, firmware seems to not like
start-cpu being called when a cpu already been started.  This was not
the case on POWER6 and earlier.

This patch checks to see if the CPU is stopped or not via an
query-cpu-stopped-state call, and only calls start-cpu on CPUs which
are stopped.

This fixes a bug with kexec on POWER7 on PHYP where only the primary
thread would make it to the second kernel.

Reported-by: Ankita Garg <ankita@linux.vnet.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06 16:49:25 +10:00
Michael Neuling
f8b6769182 powerpc/pseries: Make query_cpu_stopped callable outside hotplug cpu
This moves query_cpu_stopped() out of the hotplug cpu code and into
smp.c so it can called in other places and renames it to
smp_query_cpu_stopped().

It also cleans up the return values by adding some #defines

Cc: <stable@kernel.org>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06 16:49:25 +10:00
Takashi Iwai
ef5dbbccbb ALSA: hda - Remove superfluous external amp setup for ALC888
We had a fixed external amp setup enabled for ALC888, but this seems
unnecessary.  The amps are controlled rather by GPIOs.
Let's remove it now.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-05-06 08:40:25 +02:00
Takashi Iwai
20d157aef2 Merge branch 'fix/hda' into topic/hda 2010-05-06 08:39:43 +02:00
Shaohua Li
4bdae98f1a ACPI: fix acpi_hest_firmware_first_pci() caused oops
acpi_hest_firmware_first_pci() could be called when acpi is disabled
and cause system oops.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-06 02:39:06 -04:00
Valentin Longchamp
7176441b95 mx31smartbot: change the config of a gpio
Since it is finally used on the handbot as a configuration input for
the translator.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-05-06 08:38:34 +02:00
Dan Carpenter
97c227cb51 sbshc: acpi_device_class "smbus_host_controller" too long
acpi_device_class can only be 19 characters and a NULL terminator.

With the current name we get a buffer overflow in acpi_smbus_hc_add()
when we do:
	strcpy(acpi_device_class(device), ACPI_SMB_HC_CLASS);

Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-06 02:38:25 -04:00
Dan Carpenter
18262714ca power_meter: acpi_device_class "power_meter_resource" too long
acpi_device_class can only be 19 characters and a NULL terminator.

The current code has a buffer overflow in acpi_power_meter_add():
       strcpy(acpi_device_class(device), ACPI_POWER_METER_CLASS);

Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: Len Brown <lenb@kernel.org>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-06 02:38:24 -04:00
Dan Carpenter
a40770a953 acpi_pad: "processor_aggregator" name too long
cpi_device_class can only be 19 characters and a NULL terminator.

With the current name we get a buffer overflow in acpi_pad_add()
	strcpy(acpi_device_class(device), ACPI_PROCESSOR_AGGREGATOR_CLASS);

[akpm@linux-foundation.org: call it acpi_pad, per Shaohua Li]
Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: walter harms <wharms@bfs.de>
Acked-by: Shaohua Li <shaohua.li@intel.com>
Cc: Len Brown <lenb@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-06 02:38:23 -04:00
Eric W. Biederman
4f47b4c9f0 x86, acpi/irq: Define gsi_end when X86_IO_APIC is undefined
My recent changes introducing a global gsi_end variable
failed to take into account the case of using acpi on a system
not built to support IO_APICs, causing the build to fail.

Define gsi_end to 15 when CONFIG_X86_IO_APIC is not set to avoid
compile errors.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <m1tyqm14la.fsf_-_@fess.ebiederm.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-06 08:17:51 +02:00
Marc Kleine-Budde
af7ad7a0a6 UBI: init even if MTD device cannot be attached, if built into kernel
UBI can be built into the kernel or be compiled as a kernel module.
Further on the command line one can specify MTD devices to be attach to
UBI while loading. In the current implementation the UBI driver refuses
to load if one of the MTD devices cannot be attached.

Consider:
1) UBI compiled into the kernel and
2) a MTD device specified on the command line and
3) this MTD device contains bogus data (for whatever reason).

During init UBI tries to attach the MTD device is this fails the whole
UBI subsystem isn't initialized. Later the userspace cannot attach any
MTD to UBI because UBI isn't loaded.

This patch keeps the current behaviour: if UBI is compiled as a module
and a MTD device cannot be attached the UBI module cannot be loaded,
but changes it for the UBI-is-built-into-the-kernel usecase.

If UBI is builtin, a not attachable MTD device doen't stop UBI from
initializing. This slightly modifies the behaviour if multiple MTD
devices are specified on the command line. Now every MTD device is
probed and, if possible, attached, i.e. a faulty MTD device doesn't
stop the others from being attached.

Artem: tweaked the patch

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-05-06 09:12:11 +03:00
Paul Mundt
9b7a37853a sh: Make initrd detection more robust.
Various boot loaders go to various extents to thwart the initrd detection
logic (mostly on account of not being able to be bothered with adhering
to the established boot ABI), so we make the detection logic a bit more
robust. This makes it possible to work around the SDK7786's firmware's
attempts to thwart compressed image booting. Victory is mine.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-06 15:09:45 +09:00
Bjorn Helgaas
11439a6fd9 PNP: don't check for conflicts with bridge windows
With fa35b4926, I broke a lot of PNP resource assignment.  That commit made
PNPACPI include bridge windows as PNP resources, and PNP resource assignment
treats any enabled overlapping PNP resources as conflicts.  Since PCI host
bridge windows typically include most of the I/O port space, this makes PNP
port assigments fail.

The PCI host bridge driver will eventually use those PNP window resources,
so we should make PNP ignore them when checking for conflicts.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=15903

Reported-and-tested-by: Pavel Kysilka <goldenfish@linuxsoft.cz>
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-06 02:08:47 -04:00
Brian Haley
d40a4de0be IPv6: fix IPV6_RECVERR handling of locally-generated errors
I noticed when I added support for IPV6_DONTFRAG that if you set
IPV6_RECVERR and tried to send a UDP packet larger than 64K to an
IPv6 destination, you'd correctly get an EMSGSIZE, but reading from
MSG_ERRQUEUE returned the incorrect address in the cmsg:

struct msghdr:
	 msg_name         0x7fff8f3c96d0
	 msg_namelen      28
struct sockaddr_in6:
	 sin6_family      10
	 sin6_port        7639
	 sin6_flowinfo    0
	 sin6_addr        ::ffff:38.32.0.0
	 sin6_scope_id    0  ((null))

It should have returned this in my case:

struct msghdr:
	 msg_name         0x7fffd866b510
	 msg_namelen      28
struct sockaddr_in6:
	 sin6_family      10
	 sin6_port        7639
	 sin6_flowinfo    0
	 sin6_addr        2620:0:a09:e000:21f:29ff:fe57:f88b
	 sin6_scope_id    0  ((null))

The problem is that ipv6_recv_error() assumes that if the error
wasn't generated by ICMPv6, it's an IPv4 address sitting there,
and proceeds to create a v4-mapped address from it.

Change ipv6_icmp_error() and ipv6_local_error() to set skb->protocol
to htons(ETH_P_IPV6) so that ipv6_recv_error() knows the address
sitting right after the extended error is IPv6, else it will
incorrectly map the first octet into an IPv4-mapped IPv6 address
in the cmsg structure returned in a recvmsg() call to obtain
the error.

Signed-off-by: Brian Haley <brian.haley@hp.com>

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:32:40 -07:00
Sage Weil
54ad023ba8 ceph: don't use writeback_control in writepages completion
The ->writepages writeback_control is not still valid in the writepages
completion.  We were touching it solely to adjust pages_skipped when there
was a writeback error (EIO, ENOSPC, EPERM due to bad osd credentials),
causing an oops in the writeback code shortly thereafter.  Updating
pages_skipped on error isn't correct anyway, so let's just rip out this
(clearly broken) code to pass the wbc to the completion.

Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-05 21:31:40 -07:00
Nick Nunley
2873957df0 igb: reduce cache misses on tx cleanup
This patch reduces the number of skb cache misses in the
clean_tx_irq path, and results in an overall increase
in tx packet throughput.

Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:30:12 -07:00
Sebastian Andrzej Siewior
7df9c43fbe net/gianfar: drop recycled skbs on MTU change
The size for skbs which is added to the recycled list is using the
current descriptor size which is current MTU. gfar_new_skb() is also
using this size. So after changing or alteast increasing the MTU all
recycled skbs should be dropped.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:29:15 -07:00
Sebastien Jan
a84afa40e0 ks8851: companion eeprom access through ethtool
Accessing ks8851 companion eeprom permits modifying the ks8851 stored
MAC address.

Example how to change the MAC address using ethtool, to set the
01:23:45:67:89:AB MAC address:
$ echo "0:AB8976452301" | xxd -r > mac.bin
$ sudo ethtool -E eth0 magic 0x8870 offset 2 < mac.bin

Signed-off-by: Sebastien Jan <s-jan@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:27:45 -07:00
Sebastien Jan
a4bdfff744 ks8851: Low level functions for read/write to companion eeprom
Low-level functions provide 16bits words read and write capability
to ks8851 companion eeprom.

Signed-off-by: Sebastien Jan <s-jan@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:27:44 -07:00
Sebastien Jan
7d9974666e ks8851: Add caching of CCR register
CCR register contains information on companion eeprom availability.

Signed-off-by: Sebastien Jan <s-jan@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:27:44 -07:00
Guennadi Liakhovetski
8bed90557d sh: fix a number of Oopses and leaks in SH framebuffer driver
Fix a number of Oopses, memory leaks and unbalanced calls on error paths in
sh_mobile_lcdcfb.c.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-06 13:24:56 +09:00
Tom Herbert
d951f72503 forcedeth: Account for consumed budget in napi poll
Repeated calls to nv_rx_process in napi poll routine do not take
portion of budget that has been consumed in previous calls.  Fix by
subtracting the number of packets processed.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:24:17 -07:00
David Daney
0294b6f78f netdev: octeon_mgmt: Remove some gratuitous blank lines.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:22:35 -07:00
David Daney
4e4a4f1478 netdev: octeon_mgmt: Try not to drop TX packets when stopping the queue.
Stop the queue when we add the packet that will fill it instead of dropping the packet

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:22:35 -07:00
David Daney
b635e06993 netdev: octeon_mgmt: Free TX skbufs in a timely manner.
We also reduce the high water mark to 1 so skbufs are not stranded for
long periods of time.  Since we are cleaning after each packet, no
need to do it in the transmit path.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:22:34 -07:00
David Daney
a0cfa850ac netdev: octeon_mgmt: Fix race manipulating irq bits.
Don't re-read the interrupt status register, clear the exact bits we
will be testing.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:22:34 -07:00
David Daney
4d30b8013b netdev: octeon_mgmt: Fix race condition freeing TX buffers.
Under heavy load the TX cleanup tasklet and xmit threads would race
and try to free too many buffers.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:22:33 -07:00
David Daney
62538d2490 netdev: octeon_mgmt: Use proper MAC addresses.
The original implementation incorrectly uses netdev->dev_addrs.

Use netdev->uc instead.  Also use netdev_for_each_uc_addr to iterate
over the addresses.  Fix comment.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:22:33 -07:00
Greg Rose
7f01648aa3 ixgbe: Add support for VF MAC and VLAN configuration
Add support for the "ip link set" and "ip link show" commands that allow
configuration of the virtual functions' MAC and port VLAN via user space
command line.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:15:33 -07:00
Greg Rose
f04127760e ixgbe: Add boolean parameter to ixgbe_set_vmolr
Add a boolean parameter to ixgbe-set_vmolr so that the caller can
specify whether the pool should accept untagged packets.  Required
for a follow on patch to enable administrative configuration of port
VLAN for virtual functions.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:15:32 -07:00
Jesse Brandeburg
eab2abf582 e1000/e1000e: implement a simple interrupt moderation
Back before e1000-7.3.20, the e1000 driver had a simple algorithm that
managed interrupt moderation.  The driver was updated in 7.3.20 to
have the new "adaptive" interrupt moderation but we have customer
requests to redeploy the old way as an option.  This patch adds the
old functionality back.  The new functionality can be enabled via
module parameter or at runtime via ethtool.
Module parameter: (InterruptThrottleRate=4) to use this new
moderation method.
Ethtool method: ethtool -C ethX rx-usecs 4

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:15:32 -07:00
Alexander Duyck
edf15c1742 e1000e: increase rx fifo size to 36K on 82574 and 82583
This change increases the RX fifo size to 36K for standard frames and
decreases the TX fifo size to 4K.  The reason for this change is that on
slower systems the RX is much more likely to backfill and need space than
the TX is.  As long as the TX fifo is twice the size of the MTU we should
have more than enough TX fifo.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:15:31 -07:00
Tom Herbert
f85e4dfac6 e1000e: Save irq into netdev structure
Set net->devirq to pdev->irq.  This should be consistent with other
drivers.

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:11:26 -07:00
Tom Herbert
c72ea83d39 e1000e: Remove unnessary log message
Remove e_info message printed whenever TSO is enabled or disabled.
This is not very useful and just clutters dmesg.

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:11:26 -07:00
Tom Herbert
50849d792b e1000e: reduce writes of RX producer ptr
Reduce number of writes to RX producer pointer.   When alloc'ing RX
buffers, only write the RX producer pointer once every
E1000_RX_BUFFER_WRITE (16) buffers created.

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:11:25 -07:00
Tom Herbert
9ed318d546 e1000e: save skb counts in TX to avoid cache misses
In e1000_tx_map, precompute number of segements and bytecounts which
are derived from fields in skb; these are stored in buffer_info.  When
cleaning tx in e1000_clean_tx_irq use the values in the associated
buffer_info for statistics counting, this eliminates cache misses
on skb fields.

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:11:25 -07:00
Tom Herbert
4447957a82 bnx2x: Fix check to get RX hash
Flag used in check to get rxhash out of the descriptor is incorrect one.
Fix to use the proper features flag.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-05 21:09:27 -07:00
Tetsuo Handa
2928238142 TOMOYO: Use mutex_lock_interruptible.
Some of TOMOYO's functions may sleep after mutex_lock(). If OOM-killer selected
a process which is waiting at mutex_lock(), the to-be-killed process can't be
killed. Thus, replace mutex_lock() with mutex_lock_interruptible() so that the
to-be-killed process can immediately return from TOMOYO's functions.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
2010-05-06 13:19:18 +10:00
Jakob Viketoft
ccb8d8d070 [ARM] pxa/colibri: fix missing #include <mach/mfp.h> in colibri.h
The use of mfp_cfg_t causes build errors without including <mach/mfp.h>.

CC: stable@kernel.org
CC: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Jakob Viketoft <jakob.viketoft@bitsim.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06 11:12:12 +08:00
Pavel Machek
b53f771061 [ARM] pxa/spitz: fix On/off key name to fix warning during boot
On/Off contains slash in the name, which causes warning during boot.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06 11:12:11 +08:00
Haojian Zhuang
5d2fec5df1 [ARM] pxa: fix the incorrect cpu_is_pxa950()
Fix the wrong variable used in cpu_is_pxa950().

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06 11:12:11 +08:00
Haojian Zhuang
4157d317dc [ARM] pxa: update cpuid pattern for pxa9xx in head.S
Update CPUID pattern of PXA9xx in head.S and fix the duplicate
entries for pxa935.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06 11:12:11 +08:00
Wolfram Sang
6ae87fe219 [ARM] pxa/viper: fix timeout usage for I2C
The timeout value is in jiffies, so it should be using HZ, not a plain
number. Assume with HZ=100 '100' means 1s here and adapt accordingly.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Marc Zyngier <maz@misterjones.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Paul Shen <paul.shen@marvell.com>
Cc: Mike Rapoport <mike@compulab.co.il>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06 11:12:11 +08:00
Daniel Mack
299ed07868 [ARM] pxa/raumfeld: fix button name
"on/off button" was recently renamed to remove the slash character.
Follow that change in the pin polarity detection as well.

While at it, fix another cosmetic coding style flaw as well.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06 11:12:11 +08:00
Stefan Schmidt
12145cae4d [ARM] pxa/imote2: Fix iMote2 defconfig
- Bring in a CMDLINE that actually works and prints to the right tty
- Compile-in JFFS2 to boot into rootfs
- Remove unneeded options for Bluetooth and radio
- Disable CPU_FREQ as it makes the flash driver fail

Thanks Jonathan for spotting what I messed up.

Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06 11:12:11 +08:00
Igor Grinberg
d5df767dbe [ARM] pxa: add missing new line to regs-u2d.h
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-05-06 11:12:10 +08:00
Yauhen Kharuzhy
4fcfce9f33 serial: Use s3c2440 driver for S3C2416 SoC
UARTs in the S3C2416 are almost same as in S3C2443 and can be handled by
s3c2440 serial driver.

Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-06 11:37:18 +09:00