The tests changed by this patch, as well as the scripts they source, use
features which are not part of POSIX sh (ex. 'source' and 'local'). As a
result, these tests fail when /bin/sh is dash such as on Debian. Change the
interpreter to bash so that these tests can run successfully.
Fixes: d43eff0b85 ("selftests: bonding: up/down delay w/ slave link flapping")
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Clang warns (or errors with CONFIG_WERROR=y) when performing arithmetic
with different enumerated types, which is usually a bug:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_dpia_bw.c:548:24: error: arithmetic between different enumeration types ('const enum dc_link_rate' and 'const enum dc_lane_count') [-Werror,-Wenum-enum-conversion]
548 | link_cap->link_rate * link_cap->lane_count * LINK_RATE_REF_FREQ_IN_KHZ * 8;
| ~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~
1 error generated.
In this case, there is not a problem because the enumerated types are
basically treated as '#define' values. Add an explicit cast to an
integral type to silence the warning.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1976
Fixes: 5f3bce1326 ("drm/amd/display: Request usb4 bw for mst streams")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When current clock is equal to max dpm level clock, the level is not
indicated correctly with *. Fix by comparing current clock against dpm
level value.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.7.x
Range interval [start, last] is ordered by rb_tree, rb_prev, rb_next
return value still needs NULL check, thus modified from "node" to "rb_node".
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c:2691 svm_range_get_range_boundaries() warn: can 'node' even be NULL?
Suggested-by: Philip Yang <Philip.Yang@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To bring debug options into effect in early initialization phase
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use debug_mask=0x8 param to help isolating data path issues
on new systems in early phase.
v2: rename the flag for explicitness (lijo)
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit c572abffe9.
Will use debug module param instead of independent module param.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch to update regGL2C_CTRL4 in golden setting.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.7.x
In function 'amdgpu_device_need_post(struct amdgpu_device *adev)' -
'adev->pm.fw' may not be released before return.
Using the function release_firmware() to release adev->pm.fw.
Thus fixing the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:1571 amdgpu_device_need_post() warn: 'adev->pm.fw' from request_firmware() not released on lines: 1554.
Cc: Monk Liu <Monk.Liu@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The variables 'numerator' and 'denominator', are unsigned 16-bit integer
types, that can never be less than 0.
Thus fixing the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_vpe.c:62 vpe_u1_8_from_fraction() warn: unsigned 'numerator' is never less than zero.
drivers/gpu/drm/amd/amdgpu/amdgpu_vpe.c:63 vpe_u1_8_from_fraction() warn: unsigned 'denominator' is never less than zero.
Cc: Peyton Lee <peytolee@amd.com>
Cc: Lang Yu <lang.yu@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Peyton Lee <peyton.lee@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The amdgpu_gmc_vram_checking() function in emulation checks whether
all of the memory range of shared system memory could be accessed by
GPU, from this aspect, -EIO is returned for error scenarios.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/gmc_v6_0.c:919 gmc_v6_0_hw_init() warn: missing error code? 'r'
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:1103 gmc_v7_0_hw_init() warn: missing error code? 'r'
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:1223 gmc_v8_0_hw_init() warn: missing error code? 'r'
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:2344 gmc_v9_0_hw_init() warn: missing error code? 'r'
Cc: Xiaojian Du <Xiaojian.Du@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VM_L2_CNTL* should not be programmed on driver unload under SRIOV.
These regs are skipped during SRIOV driver init.
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Vignesh Chander <Vignesh.Chander@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In 'struct phm_ppm_table *ptr' allocation using kzalloc, an incorrect
structure type is passed to sizeof() in kzalloc, larger structure types
were used, thus using correct type 'struct phm_ppm_table' fixes the
below:
drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/process_pptables_v1_0.c:203 get_platform_power_management_table() warn: struct type mismatch 'phm_ppm_table vs _ATOM_Tonga_PPM_Table'
Cc: Eric Huang <JinHuiEric.Huang@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch to update ATHUB_MISC_CNTL offset for athub v3.3
v2: correct a typo (Tim)
v3: correct patch title (Lang)
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to update headers for nbio v7.11.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On APUs power is SoC power, not just GPU.
Clarify that for UVD/VCE/VCN the IP is powered down,
not disabled which can confusing and lead to concerns
that the IP is actually not available.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For backwards compatibility with userspace.
Fixes: 47f1724db4 ("drm/amd: Introduce `AMDGPU_PP_SENSOR_GPU_INPUT_POWER`")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2897
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hawaii, Bonaire, Fiji, and Tonga support average power, the others
support current power.
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix err return value and reset pgmap->type after checking it.
Fixes: c83dee9b63 ("drm/amdkfd: add SPM support for SVM")
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add "struct" keyword and explain the @dir array differently to
prevent kernel-doc warnings:
gpio-en7523.c:22: warning: cannot understand function prototype: 'struct airoha_gpio_ctrl '
gpio-en7523.c:27: warning: Function parameter or struct member 'dir' not described in 'airoha_gpio_ctrl'
gpio-en7523.c:27: warning: Excess struct member 'dir0' description in 'airoha_gpio_ctrl'
gpio-en7523.c:27: warning: Excess struct member 'dir1' description in 'airoha_gpio_ctrl'
Fixes: 0868ad385a ("gpio: Add support for Airoha EN7523 GPIO controller")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Prevent kernel-doc warnings by changing "/**" to common comment
format "/*" in non-kernel-doc comments:
drivers/rtc/rtc-ac100.c:103: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Clock controls for 3 clock output pins
drivers/rtc/rtc-ac100.c:382: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* RTC related bits
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: <linux-rtc@vger.kernel.org>
Link: https://lore.kernel.org/r/20240114231320.31437-1-rdunlap@infradead.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Since 1d71b30e1f85 ("sched.h: Move (spin|rwlock)_needbreak() to
spinlock.h") build fails for PREEMPT_RT, since there is no definition
available of either spin_needbreak() and rwlock_needbreak().
Since it was moved on the mentioned commit, it was placed inside a
!PREEMPT_RT part of the code, making it out of reach for an RT kernel.
Fix this by moving code it a few lines down so it can be reached by an
RT build, where it can also make use of the *_is_contended() definition
added by the spinlock_rt.h.
Fixes: d1d71b30e1 ("sched.h: Move (spin|rwlock)_needbreak() to
spinlock.h")
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Acked-by: Waiman Long <longman@redhat.com>
Remove the DRM_XE_DISPLAY config dependency on EXPERT. I can only
presume the idea was only experts should be able to disable it, but the
effect is the opposite.
Reported-by: Eero Tamminen <eero.t.tamminen@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240111104716.3548744-1-jani.nikula@intel.com
(cherry picked from commit 1c7531f50e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
- Drop unused struct pci_driver.node member (Mathias Krause)
- Fix documentation typos (Attreyee Mukherjee)
- Use a unique test pattern for each BAR in the pci_endpoint_test to make
it easier to debug address translation issues (Niklas Cassel)
- Fix kernel-doc issues (Bjorn Helgaas)
* pci/misc:
PCI: Fix kernel-doc issues
misc: pci_endpoint_test: Use a unique test pattern for each BAR
docs: PCI: Fix typos
PCI: Remove unused 'node' member from struct pci_driver
- In dw-xdata-pcie, pci_endpoint_test, and vmd, replace usage of deprecated
ida_simple_*() API with ida_alloc() and ida_free() (Christophe JAILLET)
* pci/remove-old-api:
dw-xdata: Remove usage of the deprecated ida_simple_*() API
misc: pci_endpoint_test: Remove usage of the deprecated ida_simple_*() API
PCI: vmd: Remove usage of the deprecated ida_simple_*() API
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more explicit and match spec
terminology (Bjorn Helgaas)
- Use existing PCI_IRQ_INTX, PCI_IRQ_MSI, PCI_IRQ_MSIX in artpec6, cadence,
designware, designware-plat, dra7xx, imx6, keembay, keystone, layerscape,
mhi, ntb, qcom, rcar, rcar-gen4, rockchip, tegra194, uniphier, vntb; drop
the redundant pci_epc_irq_type enum with the same values (Damien Le Moal)
- Use "intx" instead of "leg" or "legacy" when describing INTx interrupts
in endpoint core, endpoint tests, cadence, dra7xx, designware,
dw-rockchip, dwc core, imx6, keystone, layerscape, qcom, rcar-gen4,
rockchip, tegra194, uniphier, xilinx-nwl (Damien Le Moal)
* pci/irq-clean-up:
PCI: xilinx-nwl: Use INTX instead of legacy
PCI: rockchip-host: Rename rockchip_pcie_legacy_int_handler()
PCI: rockchip-ep: Use INTX instead of legacy
PCI: uniphier: Use INTX instead of legacy
PCI: tegra194: Use INTX instead of legacy
PCI: dw-rockchip: Rename rockchip_pcie_legacy_int_handler()
PCI: keystone: Use INTX instead of legacy
PCI: dwc: Rename dw_pcie_ep_raise_legacy_irq()
PCI: cadence: Use INTX instead of legacy
PCI: dra7xx: Rename dra7xx_pcie_raise_legacy_irq()
misc: pci_endpoint_test: Use INTX instead of LEGACY
PCI: endpoint: Rename LEGACY to INTX in test function driver
PCI: endpoint: Use INTX instead of legacy
PCI: endpoint: Drop PCI_EPC_IRQ_XXX definitions
PCI: Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX
- Use ida_alloc() instead of deprecated ida_simple_get() (Christophe JAILLET)
* pci/controller/vmd:
PCI: vmd: Remove usage of the deprecated ida_simple_xx() API
- Replace of_device.h with explicit of.h include to untangle header usage
(Rob Herring)
- Add DT and driver support for optional miniPCIe 1.5v and 3.3v regulators
on KingFisher (Wolfram Sang)
* pci/controller/rcar:
PCI: rcar-host: Add support for optional regulators
dt-bindings: PCI: rcar-pci-host: Add optional regulators
PCI: rcar-gen4: Replace of_device.h with explicit of.h include
- Clear MSI interrupt status before handler to avoid missing MSIs that
occur after the handler (qizhong cheng)
- Update mediatek-gen3 translation window setup to handle MMIO space that
is not a power of two in size (Jianjun Wang)
* pci/controller/mediatek:
PCI: mediatek-gen3: Fix translation window size calculation
PCI: mediatek: Clear interrupt status before dispatching handler
- Add suspend/resume support for Layerscape LS1043a, including
software-managed PME_Turn_Off and transitions between L0, L2/L3_Ready
Link states (Frank Li)
* pci/controller/layerscape:
PCI: layerscape: Add suspend/resume for ls1043a
PCI: layerscape(ep): Rename pf_* as pf_lut_*
PCI: layerscape: Add suspend/resume for ls1021a
PCI: layerscape: Add function pointer for exit_from_l2()
- Use devm_kasprintf() to dynamically allocate clock names, removing need
for an intermediate buffer (Christophe JAILLET)
* pci/controller/kirin:
PCI: kirin: Use devm_kasprintf() to dynamically allocate clock names
- Hold power management references to all PHYs while enabling them to avoid
a race when one provides clocks to others (Siddharth Vadapalli)
* pci/controller/keystone:
PCI: keystone: Fix race condition when initializing PHYs
- Add j721e DT and driver support for 'num-lanes' for devices that support
x1, x2, or x4 Links (Matt Ranostay)
- Add j721e DT compatible strings and driver support for j784s4 (Matt Ranostay)
- Make TI J721E Kconfig depend on ARCH_K3 since the hardware is specific to
those TI SoC parts (Peter Robinson)
* pci/controller/cadence:
PCI: j721e: Make TI J721E depend on ARCH_K3
PCI: j721e: Add TI J784S4 PCIe configuration
PCI: j721e: Add PCIe 4x lane selection support
PCI: j721e: Add per platform maximum lane settings
dt-bindings: PCI: ti,j721e-pci-*: Add j784s4-pci-* compatible strings
dt-bindings: PCI: ti,j721e-pci-*: Add checks for num-lanes
- Do dma_mrpc cleanup during switchtec_pci_remove() to match its devm
ioremapping in switchtec_pci_probe(). Previously the cleanup was done in
stdev_release(), which used stale pointers if stdev->cdev happened to be
open when the PCI device was removed (Daniel Stodden)
* pci/switchtec:
PCI: switchtec: Fix stdev_release() crash after surprise hot remove
- Restructure pci_dev_for_each_resource() to avoid computing the address of
an out-of-bounds array element (the bounds check was performed later so
the element was never actually *read*, but it's nicer to avoid even
computing an out-of-bounds address) (Andy Shevchenko)
* pci/resource:
PCI: Avoid potential out-of-bounds read in pci_dev_for_each_resource()
- Log device type (Root Port, Switch Port, etc) during enumeration (Bjorn
Helgaas)
- Log resource names (BAR 0, VF BAR 0, bridge window, etc) consistently
instead of a mix of names and "reg 0x10" (Puranjay Mohan, Bjorn Helgaas)
- Log bridges before devices below the bridges (Bjorn Helgaas)
* pci/enumeration-logging:
PCI: Log bridge info when first enumerating bridge
PCI: Log bridge windows conditionally
PCI: Supply bridge device, not secondary bus, to read window details
PCI: Move pci_read_bridge_windows() below individual window accessors
PCI: Use resource names in PCI log messages
PCI: Update BAR # and window messages
PCI: Log device type during enumeration
