Commit graph

255,014 commits

Author SHA1 Message Date
Shannon Nelson
e147758d9a i40e: disconnect irqs on shutdown
Combine the ICR0 shutdown with the standard interrupt shutdown, and
add the interrupt clearing to the PCI shutdown path.

This prevents the driver from allowing stray interrupts or causing
system logs from un-handled interrupts.

Change-ID: I48f6ab95cad7f8ca77c1f26c92a51cc1034ced43
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26 04:54:02 -08:00
Anjali Singhai
85e76d0312 i40evf: TCP/IPv6 over Vxlan Tx checksum offload fix
We were checking the outer Protocol flags and deciding the flow for
inner header. This patch fixes that.
This fixes the Tx checksum offload for TCP/IPv6 over vxlan.

Change-ID: I837aaea921d34f71b24c2bc32aaadea5001ddf78
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26 04:54:01 -08:00
Parikh, Neerav
11e4770842 i40e: Issue a PF reset if Tx queue disable timeout
As part of DCB reconfiguration flow if the Tx queue disable times out
then issue a PF reset to do some level of recovery.

Change-ID: I7550021c55bff355351c0365e61e1f05fcaff46d
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26 04:54:00 -08:00
Parikh, Neerav
cd238a3ecf i40e: Fix the Tx ring qset handle when DCB reconfigures
When DCB is reconfigured to single TC the driver did not reset the
Tx ring Qset handle to the correct mapping; which caused Tx queue
disable timeouts.

Change-ID: I4da5915ec92a83c281b478d653fae6ef1b72edfe
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26 04:54:00 -08:00
Anjali Singhai
7f9ff47683 i40e: Fix the case where per TC queue count was higher than queues enabled
When the driver or hardware gets less interrupt vectors than the actual
number of CPU cores, limit the queue count for the priority queue
traffic class (TC) queues.

This will fix a warning with multiple function mode where systems
regularly have more cores than vectors.

Also add extra comment for readability.

Change-ID: I4f02226263aa3995e1f5ee5503eac0cd6ee12fbd
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Jim Young  <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26 04:53:59 -08:00
Jesse Brandeburg
a68de58d27 i40e: fix race in hang check
The driver was having some issues with false Tx hang detection. This
makes the driver a little more direct with the checks for progress
forward by directly checking the head write back address and tail register
when determining progress.  This avoids Tx hangs where the software
gets behind, because we are directly checking hardware state when
determining hang state.

Change-ID: I774f0e861c9e8ab5ccb213634100fe15440ae24a
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26 04:53:59 -08:00
Anjali Singhai
71da61976e i40e: Fix TSO with more than 8 frags per segment issue
The hardware has some limitations the driver needs to adhere to,
that we found in extended testing.
  1) no more than 8 descriptors per packet on the wire
  2) no header can span more than 3 descriptors

If one of these events occurs, the hardware will generate an internal
error and freeze the Tx queue.

This patch linearizes the skb to avoid these situations.

Change-ID: I37dab7d3966e14895a9663ec4d0aaa8eb0d9e115
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26 04:53:58 -08:00
Akeem G Abodunrin
b67a03357c i40e: Don't check for Tx hang when PF down
This patch adds check to bail out if device is already down when checking
for Tx hang subtask.

Change-ID: I3853fb7a6d11cb9a4c349b687cb25c15b19977a0
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26 04:53:57 -08:00
Shannon Nelson
de78fc5ac1 i40e: fix shift precedence issue
Add parens to make sure the shift and bitwise precedences don't work backwards
for us.

Change-ID: I60c10ef4fad6bc654522b9d8a53da2e270a0f268
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26 04:53:57 -08:00
Alexey Khoroshilov
dda094a312 i40e: Fix memory leak at failure path in i40e_dbg_command_write()
The patch fixes a leak of 'cmd_buf' when copy_from_user() failed
in i40e_dbg_command_write().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Tested-by: Jim Young <james.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-26 04:53:56 -08:00
Tom Lendacky
74ad752442 amd-xgbe-phy: PHY KX/KR mode differences
The PHY requires different settings for the Decision Feedback Analyzer
(DFE) when running in KX mode vs. KR mode. Update the code to change
these settings when changing modes in order to provide a more stable
link.

Additionally, adjust the 10GbE PQ skew default setting to a more sane
value.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-25 16:57:42 -05:00
Yannick Guerrini
5c2d2b148b r8169: Fix trivial typo in rtl_check_firmware
Change 'firwmare' to 'firmware'

Signed-off-by: Yannick Guerrini <yguerrini@tomshardware.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-24 16:26:07 -05:00
David Vrabel
7fbb9d8415 xen-netback: release pending index before pushing Tx responses
If the pending indexes are released /after/ pushing the Tx response
then a stale pending index may be used if a new Tx request is
immediately pushed by the frontend.  The may cause various WARNINGs or
BUGs if the stale pending index is actually still in use.

Fix this by releasing the pending index before pushing the Tx
response.

The full barrier for the pending ring update is not required since the
the Tx response push already has a suitable write barrier.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-24 16:24:22 -05:00
Vlastimil Setka
8d4ac39df0 altera_tse: Fixes in NAPI and interrupt handling paths
Incorrect NAPI polling caused WARNING at net/core/dev.c net_rx_action.
Some stability issues were also seen at high throughput and system
load before this patch.

This patch contains several changes in altera_tse_main.c:

- tse_rx() is fixed to not process more than `limit` frames

- tse_poll() is refactored to match NAPI logic
  - only received frames are counted for return value
  - removed bogus condition `(rxcomplete >= budget || txcomplete > 0)`
  - replace by: if (rxcomplete < budget) -> call __napi_complete and enable irq

- altera_isr()
  - replace spin_lock_irqsave() by spin_lock() - we are in isr
  - use spinlocks just over irq manipulation, not over __napi_schedule
  - reset IRQ first, then disable and schedule napi

This is a cleaned up resubmission from Vlastimil's recent submission.

Signed-off-by: Vlastimil Setka <setka@vsis.cz>
Signed-off-by: Roman Pisl <rpisl@kky.zcu.cz>
Signed-off-by: Vince Bridgers <vbridger@opensource.altera.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23 18:07:36 -05:00
Vlastimil Setka
fe6e4081a6 altera_tse: Correct typo in obtaining tx_fifo_depth from devicetree
This patch corrects a typo in the way tx_fifo_depth is read from the
devicetree. This patch was submitted by Vlastimil about a week ago,
and is now cleaned up and resubmitted.

Signed-off-by: Vlastimil Setka <setka@vsis.cz>
Signed-off-by: Vince Bridgers <vbridger@opensource.altera.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23 18:07:35 -05:00
Jiri Pirko
57e5956319 team: fix possible null pointer dereference in team_handle_frame
Currently following race is possible in team:

CPU0                                        CPU1
                                            team_port_del
                                              team_upper_dev_unlink
                                                priv_flags &= ~IFF_TEAM_PORT
team_handle_frame
  team_port_get_rcu
    team_port_exists
      priv_flags & IFF_TEAM_PORT == 0
    return NULL (instead of port got
                 from rx_handler_data)
                                              netdev_rx_handler_unregister

The thing is that the flag is removed before rx_handler is unregistered.
If team_handle_frame is called in between, team_port_exists returns 0
and team_port_get_rcu will return NULL.
So do not check the flag here. It is guaranteed by netdev_rx_handler_unregister
that team_handle_frame will always see valid rx_handler_data pointer.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Fixes: 3d249d4ca7 ("net: introduce ethernet teaming device")
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23 15:30:28 -05:00
Marcel Holtmann
407550fe2c Bluetooth: btusb: Fix issue with CSR based Intel Wireless controllers
Older Wireless controllers from Intel used CSR chips to provide support
for Bluetooth.

The commit d0ac9eb72 (Bluetooth: btusb: Ignore unknown Intel devices
with generic descriptor) disabled these older controllers. To enable
them again, put them into the blacklist and mark them clearly as CSR
based controllers.

T:  Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#=  3 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=8087 ProdID=07da Rev=78.69
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Reported-by: Kenneth R. Crudup <kenny@panix.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-02-23 09:30:35 +02:00
David S. Miller
87cda7cb43 r8169: Revert BQL and xmit_more support.
There are certain regressions which are pointing to
these two commits which we are having a hard time
resolving.  So revert them for now.

Specifically this reverts:

	commit 0bec3b700d
	Author: Florian Westphal <fw@strlen.de>
	Date:   Wed Jan 7 10:49:49 2015 +0100

	    r8169: add support for xmit_more

and

	commit 1e91887685
	Author: Florian Westphal <fw@strlen.de>
	Date:   Wed Oct 1 13:38:03 2014 +0200

	    r8169: add support for Byte Queue Limits

There were some attempts by Eric Dumazet to address some obvious
problems in the TX flow, to see if they would fix the problems,
but none of them seem to help for the regression reporters.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-22 15:54:29 -05:00
Fabian Frederick
2c45015a66 wan: cosa: replace current->state by set_current_state()
Use helper functions to access current->state.
Direct assignments are prone to races and therefore buggy.

current->state = TASK_RUNNING is replaced by __set_current_state()

Thanks to Peter Zijlstra for the exact definition of the problem.

Suggested-By: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-By: Jan "Yenya" Kasprzak <kas@fi.muni.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-22 15:24:10 -05:00
Fabian Frederick
50462ce005 hso: replace current->state by __set_current_state()
Use helper functions to access current->state.
Direct assignments are prone to races and therefore buggy.

Thanks to Peter Zijlstra for the exact definition of the problem.

Suggested-By: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-22 15:24:10 -05:00
Fabian Frederick
45cee4f594 mISDN: replace current->state by set_current_state()
Use helper function to access current->state.
Direct assignments are prone to races and therefore buggy.

Thanks to Peter Zijlstra for the exact definition of the problem.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-22 15:24:10 -05:00
Florian Fainelli
ddede6d536 net: dsa: bcm_sf2: fix 64-bits register reads
Reading 64-bits register was not working because we inverted the steps
between reading the lower 32-bits of the register and reading the upper
32-bits. Swapping these operations is how the HW guarantees that 64-bits
reads are latched correctly. We only have a handful of 64-bits registers
for now, mostly MIB counters, so the imapct is low.

Fixes: 246d7f773c ("net: dsa: add Broadcom SF2 switch driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20 17:52:46 -05:00
Anish Bhatt
5a8eeec468 cxgb4: Fix incorrect 'c' suffix to %pI4, use %pISc instead
Issue caught by 0-day kernel test infrastructure. Code changed to use sockaddr
members so that %pISc can be used instead.

Fixes: b5a02f503c ('cxgb4 : Update ipv6 address handling api')

Signed-off-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20 17:25:52 -05:00
Mahesh Bandewar
f4c2b7a081 ipvlan: Fix text that talks about ip util support
ipvlan was added into 3.19 release and iproute2 added support
for the same in iproute2-3.19 package.

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
CC: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20 16:35:44 -05:00
Arnd Bergmann
bf60e50cb3 net/appletalk: LTPC needs virt_to_bus
The ltpc driver is rather outdated and does not get built on most
platforms because it requires the ISA_DMA_API symbol. However
there are some ARM platforms that have ISA_DMA_API but no virt_to_bus,
and they get this build error when enabling the ltpc driver.

drivers/net/appletalk/ltpc.c: In function 'handlefc':
drivers/net/appletalk/ltpc.c:380:2: error: implicit declaration of function 'virt_to_bus' [-Werror=implicit-function-declaration]
  set_dma_addr(dma,virt_to_bus(ltdmacbuf));
  ^

This adds another dependency in Kconfig to avoid that configuration.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20 16:28:46 -05:00
Arnd Bergmann
15added6a5 net: smc91x: improve neponset hack
The smc91x driver tries to support multiple platforms at compile
time, but they are mutually exclusive at runtime, and not clearly
defined.

Trying to build for CONFIG_SA1100_ASSABET without CONFIG_ASSABET_NEPONSET
results in this link error:

drivers/built-in.o: In function `smc_drv_probe':
:(.text+0x33310c): undefined reference to `neponset_ncr_frob'

since the neponset_ncr_set function is not defined otherwise.

Similarly, building for both CONFIG_SA1100_ASSABET and CONFIG_SA1100_PLEB
results in a different build error:

smsc/smc91x.c: In function 'smc_drv_probe':
smsc/smc91x.c:2299:2: error: implicit declaration of function 'neponset_ncr_set' [-Werror=implicit-function-declaration]
  neponset_ncr_set(NCR_ENET_OSC_EN);
  ^
smsc/smc91x.c:2299:19: error: 'NCR_ENET_OSC_EN' undeclared (first use in this function)
  neponset_ncr_set(NCR_ENET_OSC_EN);
                   ^

This is an attempt to fix the call site responsible for both
errors, making sure we call the function exactly when the driver
is actually trying to run on the assabet/neponset machine. With
this patch, I no longer see randconfig build errors in this file.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20 16:23:27 -05:00
Derrick Pallas
f81edc6ac1 ethernet/ixp4xx: prevent allmulti from clobbering promisc
If both promisc and allmulti are set, promisc should trump allmulti and
disable the MAC filter; otherwise, the interface is not really promisc.

Previously, this code checked IFF_ALLMULTI prior to and without regard for
IFF_PROMISC; if both were set, only multicast and direct unicast traffic
would make it through the filter.

Signed-off-by: Derrick Pallas <pallas@meraki.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20 15:49:07 -05:00
Guenter Roeck
54da5a8be3 net: phy: Fix verification of EEE support in phy_init_eee
phy_init_eee uses phy_find_setting(phydev->speed, phydev->duplex)
to find a valid entry in the settings array for the given speed
and duplex value. For full duplex 1000baseT, this will return
the first matching entry, which is the entry for 1000baseKX_Full.

If the phy eee does not support 1000baseKX_Full, this entry will not
match, causing phy_init_eee to fail for no good reason.

Fixes: 9a9c56cb34 ("net: phy: fix a bug when verify the EEE support")
Fixes: 3e7077067e ("phy: Expand phy speed/duplex settings array")
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20 15:29:49 -05:00
Ben Shelton
42c972a1f3 usb: plusb: Add support for National Instruments host-to-host cable
The National Instruments USB Host-to-Host Cable is based on the Prolific
PL-25A1 chipset.  Add its VID/PID so the plusb driver will recognize it.

Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-20 15:12:48 -05:00
Anton Blanchard
aa18332331 ehea: Register memory hotplug, reboot and crash hooks on adapter probe
ehea creates memory hotplug, reboot and crash hooks even if there
are no adapters in the box. Just create them when we probe our
first adapter.

[cascardo: use ehea_register_memory_hooks return code]
Signed-off-by: Anton Blanchard <anton@samba.org>
Tested-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-19 16:04:33 -05:00
Linus Torvalds
5c2770079f Changes to existing drivers:
- Repair platform device collision; da9052, wm8994-core
   - Regmap configuration amendments; tps65218
   - Fix runtime PM deadlock; rtsx_usb
   - Remove unused/superfluous code; db8500-prcmu, omap-usb-host
   - Enable watchdog timer; lpc_sch
   - Add start/stop RX URBs helpers; dln2
   - Remove platform device (DT only); max77686, max77802
   - Support suspend and resume; dln2
   - Add Device Tree support; da9063
   - Supply extra error checking; intel_soc_pmic
   - Constify all the things; 88pm860x, hi6421-pmic, intel_soc_pmic,
                              max77686, lm3533, retu, pcf50633,
                              davinci_voicecodec, smsc-ece1099,
                              tps65218, mc13xxx, tps65217, twl-core,
                              twl6040
 New drivers/supported devices:
   - Supply new driver for Richtek RT5033
   - Supply new driver for DA9150 Charger and FuelGauge
   - Supply new driver for Qualcomm Resource Power Manager (RPM)
   - Add support for the ir-clk into sun6i-prcm
   - Add support for FuelGauge into axp20x
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU4yfwAAoJEFGvii+H/HdhhLQP/iWReuVzIp6bs7MIOWYAI5XZ
 hYGWD4rj/3jR9uAMOPj/h7ZmiMt7pYR2jzzOLIM9lyaAUJ1KkIHhBvimthu0NiMa
 5zE/m8V86FUkuZpBQgXMFYxU69q6Q4Smd9aM6nx3tJpcv7VV2ROotUU+h0Zc+hfa
 2SJhnCLL9joewv6kflELJT7X/WnOnHXwBdo/co79QlQ/Zw4Ry29TTFTWDCKPtY21
 XFmArDNm2OCDu0wffR/rI23DJRqWh3/TSVruFk6AsspdPthjOwxbu7n1od0izkn2
 Ulwte4daLJXsGzlHMVT52xTKiPU+KL5RhlzZSC2BEMhzbQLZQF51zrlWAHIXFRyU
 C6FhIug2CHb/Gv1fBdbxWR9FM2csRTsYam5xBRoy/OnmvdjysAa/KryFg5JwCoAz
 Y8SXT6CZbZwkFVMY+X+jMBcEHRBqo9Wd8S9dPTCfVnYamg27SGMikmZ+4tWMhLFF
 r28itoWMVHVByO9LzJxJVxL3qjHDxqxwZH6l4zO5DFxOJMG9tuY79IbXorUO/maL
 ld6NamfCon8f0m/UlnmImwE1VyIjFJMHHVqJyrSnML4nKFYHrbtxZS0KMtKV6OJg
 zmB/7EmPeltNLrB+OY7lVOyZVod6IM4+mOF/WjIlo7VvC9MAv5kZyjShiZ29JOvD
 wvmnB1bwe98vTjeHKDl7
 =9a/l
 -----END PGP SIGNATURE-----

Merge tag 'mfd-for-linus-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Changes to existing drivers:
   - fixr platform device collision; da9052, wm8994-core
   - regmap configuration amendments; tps65218
   - fix runtime PM deadlock; rtsx_usb
   - remove unused/superfluous code; db8500-prcmu, omap-usb-host
   - enable watchdog timer; lpc_sch
   - add start/stop RX URBs helpers; dln2
   - remove platform device (DT only); max77686, max77802
   - support suspend and resume; dln2
   - add Device Tree support; da9063
   - extra error checking; intel_soc_pmic
   - const'ify all the things; 88pm860x, hi6421-pmic, intel_soc_pmic,
                               max77686, lm3533, retu, pcf50633,
                               davinci_voicecodec, smsc-ece1099,
                               tps65218, mc13xxx, tps65217, twl-core,
                               twl6040

  New drivers/supported devices:
   - new driver for Richtek RT5033
   - new driver for DA9150 Charger and FuelGauge
   - new driver for Qualcomm Resource Power Manager (RPM)
   - add support for the ir-clk into sun6i-prcm
   - add support for FuelGauge into axp20x"

* tag 'mfd-for-linus-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (32 commits)
  mfd: intel_soc_pmic: Add missing error check for devm_kzalloc
  mfd: rtsx_usb: Defer autosuspend while card exists
  mfd: devicetree: Add bindings for DA9063
  mfd: da9063: Add device tree support
  regulator: qcom-rpm: Add missing state flag in call to RPM
  mfd: qcom-rpm: Driver for the Qualcomm RPM
  mfd: devicetree: bindings: Add Qualcomm RPM DT binding
  mfd: max77686/802: Remove support for board files
  mfd: omap-usb-host: Remove some unused functions
  mfd: twl6040: Constify struct regmap_config and reg_default array
  mfd: twl-core: Constify struct regmap_config and reg_default array
  mfd: tps65217: Constify struct regmap_config
  mfd: mc13xxx: i2c/spi: Constify struct regmap_config
  mfd: tps65218: Constify struct regmap_config
  mfd: smsc-ece1099: Constify struct regmap_config
  mfd: davinci_voicecodec: Constify struct regmap_config
  mfd: pcf50633: Constify struct regmap_config
  mfd: retu: Constify struct regmap_config
  mfd: lm3533: Constify struct regmap_config
  mfd: max77686: Constify struct regmap_config
  ...
2015-02-18 09:05:48 -08:00
Linus Torvalds
9a8b2aa534 pwm: Changes for v3.20-rc1
This contains two new drivers, one for Allwinner SoCs and the other for
 Imagination Technologies' Pistachio SoC.
 
 Complementing this are a couple of fixes to the Atmel HLCDC PWM and STi
 PWM drivers as well as minor cleanups to the core and the Tegra driver.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJU5EPtAAoJEN0jrNd/PrOhqRcQAJSxA7/HVzyEOSphpmysTwnh
 gu1++iaFw0LTJ/OcoA3i6oesmbZ+W0QhEZEflEEXuQriAT/U0scC9sKcxz3iBWc3
 T1+S3V8CF3ZXjo9Tuurihf/QsfrwrMwge4CQUZfdpRjgD3yiiFx9+U6NwBNmtYix
 C1BhR9ybHU16LUuYWct3iS1kjwW/eGx/FLYuW46dYHjcYrAlMEXCZWFhKbgZpnl7
 AF6Wap2CWBrFLuftsz6kXy/w8MMx8jZXoUpWlCOs1bY2xJTjOGjkzijs6fHTv+dU
 +AvjoOAzsDVEsi6QYoVrNh6XvjpG/VQuk0DKQ3/OZBrKtRLFsrDD3uB5+yYg5Liv
 /b6/vNNL64qKrM8677PzoprjdgInCnN2EFxass4al6l9bC7IxCHRwutz+dKSfBy7
 KUqOghl1cQEPxyXly4NGo4Z4pC/S03xmghfBcgdk6yulpEnV/GXPZzzyrikFqcYQ
 TY03BP1nJ1fkGN42kYZYkdefUOBzybEAT2q9Zq3SgVoexkgDNa1vKo4NEHbZmjYt
 Kz1QT1cz/en2Cp2snLSMPsidgr9YaXB6Lrl6YlLHEtG04f0Ey3/iJpMm9VAy5dEv
 fDgavey1OOM5qzMJv0zaK73gE8xFSqD0sV5tbig6IW1KFoICD2+mfgAnjuB17xEm
 RbLSMs2uuBJ3N2oO43HR
 =3uQb
 -----END PGP SIGNATURE-----

Merge tag 'pwm/for-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This contains two new drivers, one for Allwinner SoCs and the other
  for Imagination Technologies' Pistachio SoC.

  Complementing this are a couple of fixes to the Atmel HLCDC PWM and
  STi PWM drivers as well as minor cleanups to the core and the Tegra
  driver"

* tag 'pwm/for-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: tegra: Use NSEC_PER_SEC
  pwm: Remove unnecessary check before of_node_put()
  pwm: Add device tree binding document for IMG PWM DAC
  pwm: Imagination Technologies PWM DAC driver
  pwm: sti: Maintain a bitmap of configured devices
  pwm: sunxi: document OF bindings
  pwm: Add Allwinner SoC support
  pwm: atmel-hlcdc: Prevent division by zero
  pwm: atmel-hlcdc: Depend on HAVE_CLK
2015-02-18 09:00:53 -08:00
Linus Torvalds
ce1d3fde87 Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
 "This update brings:

   - the big cleanup up by Maxime for device control and slave
     capabilities.  This makes the API much cleaner.

   - new IMG MDC driver by Andrew

   - new Renesas R-Car Gen2 DMA Controller driver by Laurent along with
     bunch of fixes on rcar drivers

   - odd fixes and updates spread over driver"

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (130 commits)
  dmaengine: pl330: add DMA_PAUSE feature
  dmaengine: pl330: improve pl330_tx_status() function
  dmaengine: rcar-dmac: Disable channel 0 when using IOMMU
  dmaengine: rcar-dmac: Work around descriptor mode IOMMU errata
  dmaengine: rcar-dmac: Allocate hardware descriptors with DMAC device
  dmaengine: rcar-dmac: Fix oops due to unintialized list in error ISR
  dmaengine: rcar-dmac: Fix spinlock issues in interrupt
  dmaenegine: edma: fix sparse warnings
  dmaengine: rcar-dmac: Fix uninitialized variable usage
  dmaengine: shdmac: extend PM methods
  dmaengine: shdmac: use SET_RUNTIME_PM_OPS()
  dmaengine: pl330: fix bug that cause start the same descs in cyclic
  dmaengine: at_xdmac: allow muliple dwidths when doing slave transfers
  dmaengine: at_xdmac: simplify channel configuration stuff
  dmaengine: at_xdmac: introduce save_cc field
  dmaengine: at_xdmac: wait for in-progress transaction to complete after pausing a channel
  ioat: fail self-test if wait_for_completion times out
  dmaengine: dw: define DW_DMA_MAX_NR_MASTERS
  dmaengine: dw: amend description of dma_dev field
  dmatest: move src_off, dst_off, len inside loop
  ...
2015-02-18 08:49:20 -08:00
Linus Torvalds
928fce2f6d Merge git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
 "This adds the following new drivers:

   - ImgTec PDC Watchdog Timer Driver,
   - Mediatek SoC integrated watchdog

  Add support for BCM5301X, IT8783, NCT6791 and NCT6792 WDT's

  Add bcm47xx_wdt and da9063 restart handlers and contains overall
  improvements and fixes"

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: bcm47xx_wdt.c: allow enabling on BCM5301X arch
  watchdog: jz4740: Add DT support
  dt: watchdog: Add DT binding documentation for jz4740 watchdog timer
  watchdog: dw_wdt: Try to get a 30 second watchdog by default
  watchdog: dw_wdt: pat the watchdog before enabling it
  watchdog: w83627hf_wdt: Add support for NCT6791 and NCT6792
  watchdog: bcm47xx_wdt.c: add restart handler support
  watchdog: gpio_wdt: Add "always_running" feature to GPIO watchdog
  watchdog: da9063: Add restart handler support
  ARM: mediatek: dts: Add bindings for watchdog
  watchdog: Add driver for Mediatek watchdog
  watchdog: Fix omap watchdogs to enable the magic close bit
  watchdog: rt2880_wdt: minor clean up
  watchdog: hpwdt: Fix initialization message in hpwdt.c
  watchdog: it87_wdt: add IT8783 ID
  watchdog: imx2: Constify struct regmap_config and watchdog_ops
  DT: watchdog: Add ImgTec PDC Watchdog Timer binding documentation
  watchdog: ImgTec PDC Watchdog Timer Driver
2015-02-18 08:42:47 -08:00
Linus Torvalds
a5ac1fb13c IEEE 1394 subsystem updates:
- Replace made-up, unallocated Vendor and Model values of firewire-core's
     Configuration ROM register root directory by properly registered IDs.
     (These IDs are visible to peer nodes on the bus and locally via sysfs,
     but they are not involved in protocol matching or driver matching, nor
     are they used in stock udev rules.)
 
   - Remove some unneccessary code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJU40M4AAoJEHnzb7JUXXnQjrMP/0HH3BU+scMZ4sxCsj0553NW
 oxj052Adcn+EtH8uCWEfOZqaSCCM3xToTJLNEmLFI5RWURvlMu+caOZVei3fTA3w
 0QFpPqJlR1JEt7y31ZNc0sjJtJB7fMTJi/GV5xxkNxxwWPLWU7aFwNs5axM++ihv
 NjE5ZfbATObPoPXnt7eJro8dEFvklpmv4YHWl6zgDf0uzjFTnPvy3oCQyjuuR6H9
 13+D2RqmUMxkj6hPtOxMIjpPVjTXU776LRukSkAhAcM8RZCMX3tNh1En6YpXTKQJ
 ESj8STUE6+8XA6RUL4wmCR4nxEoKOthmow3vNIG8Ki20PE41q7qWy2ls7W6NqBGV
 7Yc+Z69J1GpLVe0n8R84E9oftd8TVTPuM5JWKj8PastjH2x3k5HXnYiIv3GpDjvi
 hKur3++vQftX01zVXR3hplatDjPeRZ81drrZ/wEBV6sn4ZWb7ItjOHhy243428WT
 VFxJU7y1jHC0D87lZSTvQpUZ3Pav7h3ADezxRaZ5/1+3+sGkXE0yiSk6DWNByJ16
 AnxW3nkp+A3k6zet5FGl5cwu/mL7rzkSBvjEWEaLk2ELvdmc4NL9sDmYHJHApoyi
 ajT2K2CUu+CDbOZ0FkPYVNmbqpfnf08djpcVq+mG3uP4X/WBY6hOudxQAOAfWEOd
 tWj7wFNqTRMZKBr5lS7K
 =qJGA
 -----END PGP SIGNATURE-----

Merge tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull fireware updates from Stefan Richter:
 "IEEE 1394 subsystem updates:

   - Replace made-up, unallocated Vendor and Model values of
     firewire-core's Configuration ROM register root directory by
     properly registered IDs.  (These IDs are visible to peer nodes on
     the bus and locally via sysfs, but they are not involved in
     protocol matching or driver matching, nor are they used in stock
     udev rules)

   - Remove some unneccessary code"

* tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: core: use correct vendor/model IDs
  firewire: sbp2: remove redundant check for bidi command
  firewire: ohci: Remove unused function
2015-02-18 08:22:38 -08:00
Linus Torvalds
402521b8f7 MTD updates for 3.20-rc1
NAND:
 
  * Add new Hisilicon NAND driver for Hip04
  * Add default reboot handler, to ensure all outstanding erase transactions
    complete in time
  * jz4740: convert to use GPIO descriptor API
  * Atmel: add support for sama5d4
  * Change default bitflip threshold to 75% of correction strength
  * Miscellaneous cleanups and bugfixes
 
 SPI NOR:
 
  * Freescale QuadSPI:
    - Fix a few probe() and remove() issues
    - Add a MAINTAINERS entry for this driver
    - Tweak transfer size to increase read performance
    - Add suspend/resume support
  * Add Micron quad I/O support
  * ST FSM SPI: miscellaneous fixes
 
 JFFS2:
 
  * gracefully handle corrupted 'offset' field found on flash
 
 Other:
 
  * bcm47xxpart: add tweaks for a few new devices
  * mtdconcat: set return lengths properly for mtd_write_oob()
  * map_ram: enable use with mtdoops
  * maps: support fallback to ROM/UBI for write-protected NOR flash
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU4qf2AAoJEFySrpd9RFgtmo4P/i7KD+Xx12SgBbO+ZUCqBJhh
 X+gorTFr0YpItdn53i1PA8t+WnnXi4BHY07Y8fCj/JL+lxzS+00156o+hsYAFWIl
 TVvjlFHxUYS/rh7plshd5kbEZunlXBOpWw2Qr4dSoIIuOChaRDm9eGNHJ75D/ImO
 Cr+83cyYAm0F+fCHavZKHUq/iFmpDcrt3vbPx/Rv51W+rs/HqPPUcKxt4iaL5Thk
 R0pkcaZHfJ+pkXfjkgRu/L35RLRVxRkycYvLlVSOyE/KqnzE1RRgFeHUYUiPeCem
 xUEoI0OqIYlR5LuKTt/NsBtz1W0Kcm3AcQDC5QliKnbGCwm9nbHAjqfraaZ4Ks2Z
 4YL/2pJCyJFT6NPjsiwiYkJOzJHvN8tLCSIQrXCtAKAkMn8YMHvWIEC/bVsAkpVq
 V3ke3gmZ8bY7sXyY+Fi5WVW4uxKCwSVtGiAw3i74v3z5hZZ818hkbtPc1J0CANiE
 iqbkLMJ5pvWuVT9V2qGlDqK1MDqNXNLXZgBfT9tJx/q5Ptitva79Ift4teRwery2
 5pD3uSaA3vJE2AGHKPfIyTDFqdDDUDCOWJIGbIKsYoKXSAmuOxuWKEhRMWeZMmjo
 o0ZOrhJqBNp4ZqvAxUddUOsGhRKNa3btPoB+IhAQG4+OBwxknsAY39BzPcBjKrkG
 iEKHgRDXXMe8W2wCalLw
 =+nRk
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20150216' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "NAND:

   - Add new Hisilicon NAND driver for Hip04
   - Add default reboot handler, to ensure all outstanding erase
     transactions complete in time
   - jz4740: convert to use GPIO descriptor API
   - Atmel: add support for sama5d4
   - Change default bitflip threshold to 75% of correction strength
   - Miscellaneous cleanups and bugfixes

  SPI NOR:

   - Freescale QuadSPI:
   - Fix a few probe() and remove() issues
   - Add a MAINTAINERS entry for this driver
   - Tweak transfer size to increase read performance
   - Add suspend/resume support
   - Add Micron quad I/O support
   - ST FSM SPI: miscellaneous fixes

  JFFS2:

   - gracefully handle corrupted 'offset' field found on flash

  Other:

   - bcm47xxpart: add tweaks for a few new devices
   - mtdconcat: set return lengths properly for mtd_write_oob()
   - map_ram: enable use with mtdoops
   - maps: support fallback to ROM/UBI for write-protected NOR flash"

* tag 'for-linus-20150216' of git://git.infradead.org/linux-mtd: (46 commits)
  mtd: hisilicon: && vs & typo
  jffs2: fix handling of corrupted summary length
  mtd: hisilicon: add device tree binding documentation
  mtd: hisilicon: add a new NAND controller driver for hisilicon hip04 Soc
  mtd: avoid registering reboot notifier twice
  mtd: concat: set the return lengths properly
  mtd: kconfig: replace PPC_OF with PPC
  mtd: denali: remove unnecessary stubs
  mtd: nand: remove redundant local variable
  MAINTAINERS: add maintainer entry for FREESCALE QUAD SPI driver
  mtd: fsl-quadspi: improve read performance by increase AHB transfer size
  mtd: fsl-quadspi: Remove unnecessary 'map_failed' label
  mtd: fsl-quadspi: Remove unneeded success/error messages
  mtd: fsl-quadspi: Fix the error paths
  mtd: nand: omap: drop condition with no effect
  mtd: nand: jz4740: Convert to GPIO descriptor API
  mtd: nand: Request strength instead of bytes for soft BCH
  mtd: nand: default bitflip-reporting threshold to 75% of correction strength
  mtd: atmel_nand: introduce a new compatible string for sama5d4 chip
  mtd: atmel_nand: return max bitflips in all sectors in pmecc_correction()
  ...
2015-02-18 08:01:44 -08:00
Thierry Reding
b65af27ad8 pwm: tegra: Use NSEC_PER_SEC
Instead of using the literal value for the number of nanoseconds per
second, use the macro instead to increase readability.

Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-02-18 08:40:29 +01:00
Linus Torvalds
f5af19d10d Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking updates from David Miller:

 1) Missing netlink attribute validation in nft_lookup, from Patrick
    McHardy.

 2) Restrict ipv6 partial checksum handling to UDP, since that's the
    only case it works for.  From Vlad Yasevich.

 3) Clear out silly device table sentinal macros used by SSB and BCMA
    drivers.  From Joe Perches.

 4) Make sure the remote checksum code never creates a situation where
    the remote checksum is applied yet the tunneling metadata describing
    the remote checksum transformation is still present.  Otherwise an
    external entity might see this and apply the checksum again.  From
    Tom Herbert.

 5) Use msecs_to_jiffies() where applicable, from Nicholas Mc Guire.

 6) Don't explicitly initialize timer struct fields, use setup_timer()
    and mod_timer() instead.  From Vaishali Thakkar.

 7) Don't invoke tg3_halt() without the tp->lock held, from Jun'ichi
    Nomura.

 8) Missing __percpu annotation in ipvlan driver, from Eric Dumazet.

 9) Don't potentially perform skb_get() on shared skbs, also from Eric
    Dumazet.

10) Fix COW'ing of metrics for non-DST_HOST routes in ipv6, from Martin
    KaFai Lau.

11) Fix merge resolution error between the iov_iter changes in vhost and
    some bug fixes that occurred at the same time.  From Jason Wang.

12) If rtnl_configure_link() fails we have to perform a call to
    ->dellink() before unregistering the device.  From WANG Cong.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (39 commits)
  net: dsa: Set valid phy interface type
  rtnetlink: call ->dellink on failure when ->newlink exists
  com20020-pci: add support for eae single card
  vhost_net: fix wrong iter offset when setting number of buffers
  net: spelling fixes
  net/core: Fix warning while make xmldocs caused by dev.c
  net: phy: micrel: disable NAND-tree for KSZ8021, KSZ8031, KSZ8051, KSZ8081
  ipv6: fix ipv6_cow_metrics for non DST_HOST case
  openvswitch: Fix key serialization.
  r8152: restore hw settings
  hso: fix rx parsing logic when skb allocation fails
  tcp: make sure skb is not shared before using skb_get()
  bridge: netfilter: Move sysctl-specific error code inside #ifdef
  ipv6: fix possible deadlock in ip6_fl_purge / ip6_fl_gc
  ipvlan: add a missing __percpu pcpu_stats
  tg3: Hold tp->lock before calling tg3_halt() from tg3_init_one()
  bgmac: fix device initialization on Northstar SoCs (condition typo)
  qlcnic: Delete existing multicast MAC list before adding new
  net/mlx5_core: Fix configuration of log_uar_page_sz
  sunvnet: don't change gso data on clones
  ...
2015-02-17 17:41:19 -08:00
Linus Torvalds
0d695d6d8b 3 bug md fixes for 3.20
yet-another-livelock in raid5, and a problem with write errors
 to 4K-block devices.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIVAwUAVOPorznsnt1WYoG5AQKa5A//RmLurotaJvHt8YA8jzlzo2KY/9jxIv8x
 jF0CQ0Kva056GG27dlkMPBoddrVk7/WaCoz/ICBKgfSTCpiEFekNlExLkeLXrgUb
 mKljS/HKhP4KQjiy519HiT2v9BRTqZD3l6P2405qVAZGTymwhelAp3y1I5ZIRFOr
 k2Uo6PNT/XYvzwWAy5iEBrE7zZl3MZJG5RjW2Wq6JKaWMUQaQERu5OhugWEfCI3U
 yVomILlwiYqC85WLgrVob/OqCSoA3UsIZkZKvKJCP8Y4C9QJzquEeZy4z0swgJq0
 FMsu2WqmI3/ZNFvmlSozN05CEUMkZF6E8hGJcT+f1Wa1NE40zrzDkVsVvsGMD8v0
 Ek7PTiA3X7AhqRl4Lt2Gs8kfDJ9MIRXzvXJv9UUO7PtVQGUhVdqmcqsodyqA7+lw
 63hgSpEUtQTkpeWwcYQY6Impr/6jGxHwQKzFlLltaDvmAeOBd6gjAq2bdfPO5tox
 FiSoClhor4yTc274+s5ORk9xDh61d7ZbnFJ+QN7YioyaSD2LHYIl9EkVFDe4OMXV
 q39VzXt+uEYx6hxfmnpjPyPvPiyuDsnXzoTMcaaGsJL4TOazoIEj5AFGmg5i3/yw
 6UVjKxJ43SMM7qg3VbgZpenGJwvRkP5mqQwMNDZICXdWulQTMwM5w3AidNqwYAaU
 oEPAMfZNGvE=
 =1BWV
 -----END PGP SIGNATURE-----

Merge tag 'md/3.20-fixes' of git://neil.brown.name/md

Pull md bugfixes from Neil Brown:
 "Three bug md fixes for 3.20

  yet-another-livelock in raid5, and a problem with write errors to
  4K-block devices"

* tag 'md/3.20-fixes' of git://neil.brown.name/md:
  md/raid5: Fix livelock when array is both resyncing and degraded.
  md/raid10: round up to bdev_logical_block_size in narrow_write_error.
  md/raid1: round up to bdev_logical_block_size in narrow_write_error
2015-02-17 17:34:21 -08:00
NeilBrown
26ac107378 md/raid5: Fix livelock when array is both resyncing and degraded.
Commit a7854487cd:
  md: When RAID5 is dirty, force reconstruct-write instead of read-modify-write.

Causes an RCW cycle to be forced even when the array is degraded.
A degraded array cannot support RCW as that requires reading all data
blocks, and one may be missing.

Forcing an RCW when it is not possible causes a live-lock and the code
spins, repeatedly deciding to do something that cannot succeed.

So change the condition to only force RCW on non-degraded arrays.

Reported-by: Manibalan P <pmanibalan@amiindia.co.in>
Bisected-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Tested-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Fixes: a7854487cd
Cc: stable@vger.kernel.org (v3.7+)
2015-02-18 11:35:14 +11:00
Linus Torvalds
c6b1de1b64 Merge branch 'debugfs_automount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull debugfs patches from Al Viro:
 "debugfs patches, mostly to make it possible for something like tracefs
  to be transparently automounted on given directory in debugfs.

  New primitive in there is debugfs_create_automount(name, parent, func,
  arg), which creates a directory and makes its ->d_automount() return
  func(arg).  Another missing primitive was debugfs_create_file_size() -
  open-coded in quite a few places.  Dave's patch adds it and converts
  the open-code instances to calling it"

* 'debugfs_automount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  debugfs: Provide a file creation function that also takes an initial size
  new primitive: debugfs_create_automount()
  debugfs: split end_creating() into success and failure cases
  debugfs: take mode-dependent parts of debugfs_get_inode() into callers
  fold debugfs_mknod() into callers
  fold debugfs_create() into caller
  fold debugfs_mkdir() into caller
  debugfs_mknod(): get rid useless arguments
  fold debugfs_link() into caller
  debugfs: kill __create_file()
  debugfs: split the beginning and the end of __create_file() off
  debugfs_{mkdir,create,link}(): get rid of redundant argument
2015-02-17 15:18:19 -08:00
Linus Torvalds
50652963ea Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc VFS updates from Al Viro:
 "This cycle a lot of stuff sits on topical branches, so I'll be sending
  more or less one pull request per branch.

  This is the first pile; more to follow in a few.  In this one are
  several misc commits from early in the cycle (before I went for
  separate branches), plus the rework of mntput/dput ordering on umount,
  switching to use of fs_pin instead of convoluted games in
  namespace_unlock()"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  switch the IO-triggering parts of umount to fs_pin
  new fs_pin killing logics
  allow attaching fs_pin to a group not associated with some superblock
  get rid of the second argument of acct_kill()
  take count and rcu_head out of fs_pin
  dcache: let the dentry count go down to zero without taking d_lock
  pull bumping refcount into ->kill()
  kill pin_put()
  mode_t whack-a-mole: chelsio
  file->f_path.dentry is pinned down for as long as the file is open...
  get rid of lustre_dump_dentry()
  gut proc_register() a bit
  kill d_validate()
  ncpfs: get rid of d_validate() nonsense
  selinuxfs: don't open-code d_genocide()
2015-02-17 14:56:45 -08:00
Linus Torvalds
99fa0ad92c Suspend-to-idle timer quiescing support for v3.20-rc1
Till now suspend-to-idle has not been able to save much more energy
 than runtime PM because of timer interrupts that periodically bring
 CPUs out of idle while they are waiting for a wakeup interrupt.  Of
 course, the timer interrupts are not wakeup ones, so the handling of
 them can be deferred until a real wakeup interrupt happens, but at
 the same time we don't want to mass-expire timers at that point.
 
 The solution is to suspend the entire timekeeping when the last CPU
 is entering an idle state and resume it when the first CPU goes out
 of idle.  That has to be done with care, though, so as to avoid
 accessing suspended clocksources etc. end we need extra support
 from idle drivers for that.
 
 This series of commits adds support for quiescing timers during
 suspend-to-idle and adds the requisite callbacks to intel_idle
 and the ACPI cpuidle driver.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJU4PNaAAoJEILEb/54YlRxgjsP/0UbDGbltVyM8VFhsobqhOni
 thKJTJsqWqYgsPfTufbOGyvP6zskbsarDlzCXoKXuHaynIqcxY8xfZvMdcQr1j0S
 nhKdqv4R6qlP3w2cFxXVZwhw21X3YO1zIxpi5Do1HdVuWoOvxq8Dk4cU8MrgOJC0
 6ThC9Q7klheV4tY6Narlmmf6sX5O+S/EaqnupESSG4cqxNmlPw5AguLviBaUNVAY
 RSjUX8LAce05bOIGEpaFY+vUws+jlU7/T/GEajquEsGF9zalh2CsWso5nQvilxrJ
 22MVqXUyHaXmTC+U7nV78qRkavR6zyr3v/JBDse56qRI1mFlmyvGh8mE5ukmpqJE
 Cg5rRC68o71xlBSVGhKW3Os2ks2Nenj2NLltrTyuh43OBJ691TaLsZnKh5nYt/MW
 MZdqRRjIDTMF+/P1u4wY8S63labrrmp7w4T720CgaZCLJ/9VfZQuqKXTTm2R5/II
 eDhFvdYXoP2748uUOn5sOr5/o0xhnMdaxykZZxE3IkSpOpIV1Mo2HWTIyDYXlILP
 0OuJUUZFZtFOjWGCPn3YgoFT94C3nlO1vkXw//44okTUiUaaOZz+VWDF4fxdVeLR
 8NGTe+/QzEq+2lbs+ZWRSM1hPukOntFcwCgWXFiqh9x2F00LAw9JpkiKBujxTjUV
 m2WstYaML3W7gBMyhxg0
 =55Jb
 -----END PGP SIGNATURE-----

Merge tag 'suspend-to-idle-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull suspend-to-idle updates from Rafael Wysocki:
 "Suspend-to-idle timer quiescing support for v3.20-rc1

  Until now suspend-to-idle has not been able to save much more energy
  than runtime PM because of timer interrupts that periodically bring
  CPUs out of idle while they are waiting for a wakeup interrupt.  Of
  course, the timer interrupts are not wakeup ones, so the handling of
  them can be deferred until a real wakeup interrupt happens, but at the
  same time we don't want to mass-expire timers at that point.

  The solution is to suspend the entire timekeeping when the last CPU is
  entering an idle state and resume it when the first CPU goes out of
  idle.  That has to be done with care, though, so as to avoid accessing
  suspended clocksources etc.  end we need extra support from idle
  drivers for that.

  This series of commits adds support for quiescing timers during
  suspend-to-idle and adds the requisite callbacks to intel_idle and the
  ACPI cpuidle driver"

* tag 'suspend-to-idle-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / idle: Implement ->enter_freeze callback routine
  intel_idle: Add ->enter_freeze callbacks
  PM / sleep: Make it possible to quiesce timers during suspend-to-idle
  timekeeping: Make it safe to use the fast timekeeper while suspended
  timekeeping: Pass readout base to update_fast_timekeeper()
  PM / sleep: Re-implement suspend-to-idle handling
2015-02-17 14:17:51 -08:00
Linus Torvalds
1d9e71404e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem fixes from James Morris.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  Don't leak a key reference if request_key() tries to use a revoked keyring
  Added Little Endian support to vtpm module
  tpm, tpm_tis: fix TPM 2.0 probing
  tpm: fix suspend/resume paths for TPM 2.0
  Smack: secmark connections
2015-02-17 13:20:42 -08:00
Rafał Miłecki
9461343161 watchdog: bcm47xx_wdt.c: allow enabling on BCM5301X arch
BCM5301X (ARCH_BCM_5301X) is a new Broadcom architecture using the same
SoC bus driver (bcma) as BCM47XX but based on ARM instead of MIPS.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17 21:34:13 +01:00
Zubair Lutfullah Kakakhel
6b96c72279 watchdog: jz4740: Add DT support
Add DT support to the jz4740 driver. Simple of_match_ptr. No other
modification for probe needed

Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17 21:34:09 +01:00
Doug Anderson
b5ade9bc8d watchdog: dw_wdt: Try to get a 30 second watchdog by default
The dw_wdt_set_top() function takes in a value in seconds.  In
dw_wdt_open() we were calling it with a value that's supposed to
represent the maximum value programmed into the "top" register with a
comment saying that we were trying to set the watchdog to its maximum
value.  Instead we ended up setting the watchdog to ~15 seconds.

Let's fix this.  However, setting things to the "max" gives me an 86
second watchdog in the system I'm looking at.  86 seconds feels a
little too long.  We'll explicitly choose 30 seconds as a more
reasonable value.

NOTE: Ideally this driver should be transitioned to be a real watchdog
driver.  Then we could use "watchdog_init_timeout" and let the timeout
be specified in a number of ways (device tree, module parameter, etc).
This patch should be considered a bit of a stopgap solution.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17 21:33:49 +01:00
Doug Anderson
a00850107e watchdog: dw_wdt: pat the watchdog before enabling it
On some dw_wdt implementations the "top" register may be initted to 0
at bootup.  In such a case, each "pat" of the watchdog will reset the
timer to 0xffff.  That's pretty short.

The input clock of the wdt can be any of a wide range of values.  On
an rk3288 system, I've seen the wdt clock be 24.75 MHz.  That means
each tick is ~40ns and we'll count to 0xffff in ~2.6ms.

Because of the above two facts, it's a really good idea to pat the
watchdog after initting the "top" register properly and before
enabling the watchdog.  If you don't then there's no way we'll get the
next heartbeat in time.

Jisheng Zhang fixed this problem on some dw_wdt versions by using the
TOP_INIT feature.  However, the dw_wdt on rk3288 doesn't have TOP_INIT
so it's a good idea to also pat the watchdog manually.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17 21:33:43 +01:00
Guenter Roeck
a77841d59e watchdog: w83627hf_wdt: Add support for NCT6791 and NCT6792
The watchdog functionality in both chips is almost identical to NCT6779.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17 21:33:37 +01:00
Rafał Miłecki
1cc7495c60 watchdog: bcm47xx_wdt.c: add restart handler support
Just like in case of other watchdog drivers, use the new kernel core
API to provide restart support.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-02-17 21:33:27 +01:00