Commit graph

286,663 commits

Author SHA1 Message Date
Paul Walmsley
52a3a4d461 ARM: OMAP4460: Clock: Adding support for 4460 specific clocks
OMAP4460 specific clocks are not getting added as the
cpu_is_omap44xx is choosing only OMAP4430 specific clock nodes.
Changing it to add to OMAP4460 specific clocks also.
This is clocks are required of temperature sensor.

Signed-off-by: Vishwanath BS <vishwanath.bs@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Cc: paul@pwsan.com
[paul@pwsan.com: updated to apply]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-10-07 01:06:48 -06:00
Jon Hunter
49642ac816 ARM: OMAP3+: dpll: use DPLLs recalc function instead of omap2_get_dpll_rate
This is a continuation of Mike Turquette's patch "OMAP3+: use
DPLL's round_rate when setting rate".

omap3_noncore_dpll_set_rate() and omap3_noncore_dpll_enable() call
omap2_get_dpll_rate() explicitly. It may be necessary for some
DPLLs to use a different function and so use the DPLLs recalc()
function pointer instead.

An example is the DPLL_ABE on OMAP4 which can have a 4X multiplier
in addition to the usual MN multipler and dividers and therefore
uses a different round_rate and recalc function.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Cc: Mike Turquette <mturquette@ti.com>
Cc: Misael Lopez Cruz <misael.lopez@ti.com>
[paul@pwsan.com: merged this patch with Mike's "use clock's recalc in DPLL
 handling" patch; also reported by Misael]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-10-07 01:01:22 -06:00
Mike Turquette
273a1ce9cf ARM: OMAP3+: dpll: assign clk rate from rounded rate during rate set
The rounded rate can differ from target rate, so to better reflect
reality set clk->rate equal to the rounded rate when setting DPLL frequency.
This avoids issues where the DPLL frequency is slightly different than what
debugfs clock tree reports using the old target rate.

An example of a clock that requires this is DPLL_ABE on OMAP4 which
can have a 4x multiplier on top of the usual MN dividers depending on
register settings.  This requires a special round_rate function that
might yield a rate different from the initial target.

Signed-off-by: Mike Turquette <mturquette@ti.com>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-10-07 00:53:00 -06:00
Mike Turquette
addf888c69 ARM: OMAP3+: dpll: use DPLL's round_rate when setting rate
omap3_noncore_dpll_set_rate uses omap2_dpll_round_rate explicitly.  Instead
use the struct clk pointer's round_rate function to allow for DPLL's with
special needs.

An example of a clock that requires this is DPLL_ABE on OMAP4 which
can have a 4x multiplier on top of the usual MN dividers depending on
register settings.  This requires a special round_rate function that
might yield a rate different from the initial target.

Signed-off-by: Mike Turquette <mturquette@ti.com>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
[paul@pwsan.com: split rate assignment portion into a separate patch]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-10-07 00:52:59 -06:00
Mike Turquette
a1900f2efe ARM: OMAP4: clock: round_rate and recalc functions for DPLL_ABE
OMAP4 DPLL_ABE can enable a 4X multipler on top of the normal MN multipler
and divider. This is achieved by setting CM_CLKMODE_DPLL_ABE.DPLL_REGM4XEN
bit in CKGEN module of CM1. From the OMAP4 TRM:

Fdpll = Fref x 2 x (4 x M/(N+1)) in case REGM4XEN bit field is set (only
applicable to DPLL_ABE).

Add new round_rate() and recalc() functions for OMAP4, that check the
setting of REGM4XEN bit and handle this appropriately. The new functions
are a simple wrapper on top of the existing omap2_dpll_round_rate() and
omap2_dpll_get_rate() functions to handle the REGM4XEN bit.

The REGM4XEN bit is only implemented for the ABE DPLL on OMAP4 and so
only dpll_abe_ck uses omap4_dpll_regm4xen_round_rate() and
omap4_dpll_regm4xen_recalc() functions.

Signed-off-by: Mike Turquette <mturquette@ti.com>
Tested-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
[paul@pwsan.com: fixed attempt to return a negative from a fn returning
		 unsigned; pass along errors from omap2_dpll_round_rate();
		 added documentation; added Jon's S-o-b]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-10-07 00:52:58 -06:00
Alexander Duyck
2bbfebe2db igb: Combine all flag info fields into a single tx_flags structure
This change is meant to combine all of the TX flags fields into one u32
flags field so that it can be stored into the tx_buffer_info structure.
This includes the time stamp flag as well as mapped_as_page flag info.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by:  Aaron Brown  <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-06 23:38:42 -07:00
Alexander Duyck
31f6adbb35 igb: Cleanup protocol handling in transmit path
This change is meant to cleanup the protocol handling in the transmit path
so that it correctly offloads software VLAN tagged frames.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by:  Aaron Brown  <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-06 23:33:01 -07:00
Alexander Duyck
e032afc80c igb: Create separate functions for generating cmd_type and olinfo
This change is meant to improve the readability of the driver by separating
out the cmd_type configuration and the olinfo configuration into their own
functions.  By doing this it is much easier to determine which ingredients
go into setting up these to portions of the descriptor.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by:  Aaron Brown  <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-06 23:27:16 -07:00
Alexander Duyck
8542db05db igb: Make first and tx_buffer_info->next_to_watch into pointers
This change converts two tx_buffer_info index values into pointers.  The
advantage to this is that we reduce unnecessary computations and in the case
of next_to_watch we get an added bonus of the value being able to provide
additional information as a NULL value indicates it is unset versus a 0 not
having any meaning for the index value.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by:  Aaron Brown  <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-06 23:17:50 -07:00
Alexander Duyck
7d13a7d0da igb: Consolidate creation of Tx context descriptors into a single function
This patch is meant to simplify the transmit path by reducing the overhead
for creating a transmit context descriptor.  The current implementation is
split with igb_tso and igb_tx_csum doing two separate implementations on
how to setup the tx_buffer_info structure and the tx_desc.  By combining
them it is possible to reduce code and simplify things since now only one
function will create context descriptors.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by:  Aaron Brown  <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-06 22:59:27 -07:00
Alexander Duyck
0603464956 igb: split buffer_info into tx_buffer_info and rx_buffer_info
In order to be able to improve the performance of the TX path it has been
necessary to add addition info to the tx_buffer_info structure.  However a
side effect is that the structure has gotten larger and this in turn has
also increased the size of the RX buffer info structure.  In order to avoid
this in the future I am splitting the single buffer_info structure into two
separate ones and instead I will join them by making the buffer_info
pointer in the ring a union of the two.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by:  Aaron Brown  <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-06 22:53:13 -07:00
Alexander Duyck
13fde97a48 igb: Make Tx budget for NAPI user adjustable
This change is to make the NAPI budget limits for transmit
adjustable.  Currently they are only set to 128, and when
the changes/improvements to NAPI occur to allow for adjustability,
it would be possible to tune the value for optimal
performance with applications such as routing.

v2: remove tie between NAPI and interrupt moderation
    fix work limit define name (s/IXGBE/IGB/)
    Update patch description to better reflect patch

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
2011-10-06 22:46:55 -07:00
Bruce Allan
b64e9dd5d0 e1000e: bad short packets received when jumbos enabled on 82579
When short packets are received with jumbos enabled on 82579, they can be
interpreted to have a receive address that does not match any configured
address.  This is due to a hardware bug that can be worked around by
reducing the number of IPG octets added when the packet is transferred from
the PHY to the MAC.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-06 22:44:13 -07:00
Jesse Brandeburg
0ef4eedc2e e1000: convert to private mutex from rtnl
The e1000 driver when running with lockdep could run into
some possible deadlocks between the work items acquiring
rtnl and the rtnl lock being acquired before work items
were cancelled.

Use a private mutex to make sure lock ordering isn't violated.
The private mutex is only used to protect areas not generally
covered by the rtnl lock already.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Tushar Dave <tushar.n.dave@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-06 22:40:56 -07:00
Jesse Brandeburg
4e0d8f7d97 e1000: convert mdelay to msleep
With the previous commit, there are several functions
that are only ever called from thread context, and are
able to sleep with msleep instead of mdelay.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Tushar Dave <tushar.n.dave@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-06 22:40:05 -07:00
Jesse Brandeburg
a4010afef5 e1000: convert hardware management from timers to threads
Thomas Gleixner (tglx) reported that e1000 was delaying for many milliseconds
(using mdelay) from inside timer/interrupt context.  None of these paths are
performance critical and can be moved into threads/work items.  This patch
implements the work items and the next patch changes the mdelays to msleeps.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Tushar Dave <tushar.n.dave@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-06 22:38:25 -07:00
Don Skidmore
19d478bbe6 ixgbe: bump version number
Bump the version string to better match pair up with the out of tree
driver that contains the same functionality.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-06 22:36:24 -07:00
Eliad Peller
170d0e6732 wl12xx: move recorded_ap_keys into wlvif
move recorded_ap_keys into the per-interface data, rather than
being global.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:33:50 +03:00
Eliad Peller
c7ffb902cc wl12xx: move ap_hlid_map into wlvif.ap
Add wlvif->links_map bitmap to represent all the links
allocated for this vif.

AP vif also has a sta_hlid_map bitmap, which represents
the links stations connected to it (sta_hlid_bitmap is
a subset of wlvif->links_map, which itself is a subset
of the global wl->links_map)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:33:46 +03:00
Eliad Peller
d0802abdf9 wl12xx: move ba fields into wlvif
move ba_fields into the per-interface data, rather than
being global.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:32:54 +03:00
Eliad Peller
04324d9981 wl12xx: move rssi_thold and last_rssi_event into wlvif
move rssi_thold and last_rssi_event into the per-interface
data, rather than being global.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:32:53 +03:00
Eliad Peller
74ec839557 wl12xx: move ps_poll_failures and psm_entry_retry into wlvif
move ps_poll_failures and psm_entry_retries into the per-interface
data, rather than being global.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:32:52 +03:00
Eliad Peller
6ec45dc282 wl12xx: move ps_compl into wlvif
move ps_compl into the per-interface data, rather than
being global.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:32:51 +03:00
Eliad Peller
252efa4f97 wl12xx: move pspoll_work into wlvif
move pspoll_work into the per-interface data, rather than
being global.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:32:50 +03:00
Eliad Peller
f75c753f3c wl12xx: move default_key into wlvif
move default_key into the per-interface data, rather than
being global.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:32:49 +03:00
Eliad Peller
6a89979643 wl12xx: move beacon_int into wlvif
move beacon_int into the per-interface data, rather than
being global.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:32:48 +03:00
Eliad Peller
afaf8bdb2b wl12xx: move dev_hlid into wlvif
move dev_hlid into the per-interface data, rather than
being global.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:32:47 +03:00
Eliad Peller
e936bbe0dc wl12xx: move some logic into wl12xx_init_vif_data
Initialize the vif data according to the vif type

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:32:47 +03:00
Eliad Peller
98b8625301 wl12xx: move session_counter into wlvif
move session_counter into the per-interface data, rather than
being global.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:32:46 +03:00
Eliad Peller
a8ab39a4b5 wl12xx: move ap_global_hlid and ap_bcast_hlid into wlvif
move ap_global_hlid and ap_bcast_hlid into the per-interface
data, rather than being global.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:32:45 +03:00
Eliad Peller
154da67c7d wl12xx: move sta_hlid into wlvif
move sta_hlid into the per-interface data, rather than
being global.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:32:44 +03:00
Eliad Peller
7edebf56ca wl12xx: move dev_role_id into wlvif
move dev_role_id into the per-interface data, rather than
being global.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:32:43 +03:00
Eliad Peller
0603d891c5 wl12xx: move role_id into wlvif
move role_id into the per-interface data, rather than
being global.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:32:42 +03:00
Eliad Peller
6840e37aec wl12xx: move aid into wlvif
move aid into the per-interface data, rather than
being global.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:32:41 +03:00
Eliad Peller
bddb29b83a wl12xx: move probereq into wlvif
move probereq into the per-interface data, rather than
being global.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:32:40 +03:00
Eliad Peller
1fe9f1616e wl12xx: move ssid and ssid_len into wlvif
move ssid and ssid_len into the per-interface data, rather than
being global.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:32:39 +03:00
Eliad Peller
fb0e707c83 wl12xx: move p2p into wlvif
move p2p field into the per-interface data, rather than
being global.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:32:38 +03:00
Eliad Peller
10bcf745ae wl12xx: remove set_bss_type field
set_bss_type is no longer evaluated, so delete it.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:32:37 +03:00
Eliad Peller
536129c8ad wl12xx: move bss_type into wlvif
move bss_type into the per-interface data, rather than
being global.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:32:37 +03:00
Eliad Peller
cdf0949558 wl12xx: replace wl->bssid with vif->bss_conf.bssid
Use the per-interface vif->bss_conf instead of the global wl->bssid.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:32:36 +03:00
Eliad Peller
d2d66c56cf wl12xx: move basic_rate into wlvif
move basic_rate into the per-interface data, rather than
being global.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:32:35 +03:00
Eliad Peller
30d0c8fd5b wl12xx: move rate_set into wlvif
move rate_set into the per-interface data, rather than
being global.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:32:34 +03:00
Eliad Peller
87fbcb0f8c wl12xx: define wl12xx_vif
Define a per-vif data struct.
This struct holds all the vif-specifc data, which is
currently being hold by the global wl struct.

Start by moving the basic_rate_set field into it.

NOTE: in order to make the patches a bit smaller, start by
using wl->vif in some functions, instead of changing all
the function prototypes at once. finally, wl->vif will be
removed altogether.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:32:33 +03:00
Eliad Peller
92c77c734f wl12xx: start reworking the init sequence
Split the init sequence into common commands (non role-specific)
and role-specific commands.

We still need to call the common commands only on add_interface()
(rather than on start()) as the fw must get the mac address
when uploading the nvs.

Future patches will refactor the init sequence further more.

Signed-off-by: Eliad Peller <eliad@wizery.com>
[fixed a couple of sparse warnings]
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:32:32 +03:00
Eliad Peller
784f694d0f wl12xx: replace wl->mac_addr with vif->addr
The mac address of the interface already exists in vif->addr.
Use it instead of wl->mac_addr.

It seems that due to some fw bug, we still need to set nvs->mac
to the actual mac addresss, otherwise the fw doesn't function
well (e.g. can't get dhcp address).
Thus, use wl->mac_addr for this purpose, and don't delete it yet.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:32:31 +03:00
Eliad Peller
694440d93b wl12xx: disable AP-mode-specific quirks
The current wl12xx fw (7.3.0.0.77) supports both STA and AP mode, and
we no longer use AP-mode-specific quirks.

WL12XX_QUIRK_END_OF_TRANSACTION is still used for certain HWs, while
WL12XX_QUIRK_LPD_MODE is not used anymore.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:32:30 +03:00
Shahar Levi
6d158ff38d wl12xx: Add support for HW channel switch
The wl12xx FW supports HW channel switch.  If we don't use it,
sometimes the firmware gets confused when recalibrating to the new
channel, causing RX problems.  This commit adds HW channel switch
support by implementing the channell_switch op.

Signed-off-by: Shahar Levi <shahar_levi@ti.com>
[added one comment, remove the tx_flush and rephrased the commit message]
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:32:27 +03:00
Luciano Coelho
c9e79a4714 wl12xx: set max_sched_scan_ie_len correctly
The wiphy max_sched_scan_ie_len attribute was not set correctly and
remained as 0, so when IEs were being passed in a scheduled scan, we
were returning -EINVAL.

Fix this by setting the attribute properly.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:31:44 +03:00
Eliad Peller
4b29886feb wl12xx: configure rate policy for p2p operations
p2p packets should go out only with OFDM rates.

Configure a new rate policy that will (later) be used
during p2p_find (when the p2p_cli / p2p_go interfaces
are in use, we won't have to use this policy, as
the configured rates should already be OFDM-only).

Additionally, update CONF_TX_MAX_RATE_CLASSES to reflect
the current value from the fw api.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07 08:31:43 +03:00
Dan Carpenter
f80befe081 dma/timberdale: free_irq() on an error path
There was an error path that skipped the free_irq() step by mistake.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-10-07 10:23:11 +05:30