Commit graph

286,663 commits

Author SHA1 Message Date
Santosh Shilimkar
1fb9026344 ARM: Enable CPU_PM notifiers on ARM machines.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-and-Acked-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Vishwanath BS <vishwanath.bs@ti.com>
2011-09-23 12:05:30 +05:30
Colin Cross
6f3eaec87b cpu_pm: call notifiers during suspend
Implements syscore_ops in cpu_pm to call the cpu and
cpu cluster notifiers during suspend and resume,
allowing drivers receiving the notifications to
avoid implementing syscore_ops.

Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-and-Acked-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Vishwanath BS <vishwanath.bs@ti.com>
2011-09-23 12:05:29 +05:30
Colin Cross
ab10023e00 cpu_pm: Add cpu power management notifiers
During some CPU power modes entered during idle, hotplug and
suspend, peripherals located in the CPU power domain, such as
the GIC, localtimers, and VFP, may be powered down.  Add a
notifier chain that allows drivers for those peripherals to
be notified before and after they may be reset.

Notified drivers can include VFP co-processor, interrupt controller
and it's PM extensions, local CPU timers context save/restore which
shouldn't be interrupted. Hence CPU PM event APIs  must be called
with interrupts disabled.

Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Tested-and-Acked-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Kevin Hilman <khilman@ti.com>
Tested-by: Vishwanath BS <vishwanath.bs@ti.com>
2011-09-23 12:05:29 +05:30
Hui Wang
3439a397a8 ARM i.MX avic: convert to use generic irq chip
Convert i.MX avic irq handler to use generic irq chip. This not only
provides a cleanup implementation of irq chip handler, but also
implements suspend/resume interface with the help of generic irq chip
interface.

Change mxc_irq_chip to a new structure mxc_extra_irq to handle fiq
and priority functions.

Signed-off-by: Hui Wang <jason77.wang@gmail.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-09-23 08:32:14 +02:00
Dan Carpenter
2ca595ab7a ALSA: hdspm - cleanup __user tags in ioctl()
This makes the code cleaner and silences a Sparse complaint:
sound/pci/rme9652/hdspm.c:6341:23: warning: incorrect type in assignment (incompatible argument 4 (different address spaces))
sound/pci/rme9652/hdspm.c:6341:23:    expected int ( *ioctl )( ... )
sound/pci/rme9652/hdspm.c:6341:23:    got int ( static [toplevel] *<noident> )( ... )
sound/pci/rme9652/hdspm.c:6102:44: warning: dereference of noderef expression
sound/pci/rme9652/hdspm.c:6225:50: warning: dereference of noderef expression
sound/pci/rme9652/hdspm.c:6264:50: warning: dereference of noderef expression
sound/pci/rme9652/hdspm.c:6283:50: warning: dereference of noderef expression
sound/pci/rme9652/hdspm.c:6289:59: warning: dereference of noderef expression

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-23 08:29:08 +02:00
Dan Carpenter
643d6bbb96 ALSA: hdspm - potential info leak in snd_hdspm_hwdep_ioctl()
Smatch has a new check for Rosenberg type information leaks where
structs are copied to the user with uninitialized stack data in them.

The status struct has a hole in it, and on some paths not all the
members were initialized.

struct hdspm_status {
        unsigned char              card_type;            /*     0     1 */
        /* XXX 3 bytes hole, try to pack */
        enum hdspm_syncsource      autosync_source;      /*     4     4 */
        long long unsigned int     card_clock;           /*     8     8 */

The hdspm_version struct had holes in it as well.

struct hdspm_version {
        unsigned char              card_type;            /*     0     1 */
        char                       cardname[20];         /*     1    20 */
        /* XXX 3 bytes hole, try to pack */
        unsigned int               serial;               /*    24     4 */
        short unsigned int         firmware_rev;         /*    28     2 */
        /* XXX 2 bytes hole, try to pack */
        int                        addons;               /*    32     4 */

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-23 08:28:56 +02:00
Takashi Iwai
8e699d2cc2 ALSA: fm801 - Clean up redundant reference to snd_fm801_tea575x_gpios[]
Use macro to improve readability.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-23 07:18:22 +02:00
Linus Torvalds
d942e43b58 Merge branch 'for-linus' of git://git.selinuxproject.org/~jmorris/linux-security
* 'for-linus' of git://git.selinuxproject.org/~jmorris/linux-security:
  TPM: Zero buffer after copying to userspace
  TPM: Call tpm_transmit with correct size
  TPM: tpm_nsc: Fix a double free of pdev in cleanup_nsc
  TPM: TCG_ATMEL should depend on HAS_IOPORT
2011-09-22 19:57:27 -07:00
Thadeu Lima de Souza Cascardo
d12b524f8b powerpc: Reserve iommu page 0
Some devices have a dma-window that starts at the address 0. This allows
DMA addresses to be mapped to this address and returned to drivers as a
valid DMA address. Some drivers may not behave well in this case, since
the address 0 is considered an error or not allocated.

The solution to avoid this kind of error from happening is reserve the
page addressed as 0 so it cannot be allocated for a DMA mapping.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-23 10:27:03 +10:00
Paul Mackerras
25c29f9e32 powerpc: Fix hugetlb with CONFIG_PPC_MM_SLICES=y
Commit 41151e77a4 ("powerpc: Hugetlb for BookE") added some
#ifdef CONFIG_MM_SLICES conditionals to hugetlb_get_unmapped_area()
and vma_mmu_pagesize().  Unfortunately this is not the correct config
symbol; it should be CONFIG_PPC_MM_SLICES.  The result is that
attempting to use hugetlbfs on 64-bit Power server processors results
in an infinite stack recursion between get_unmapped_area() and
hugetlb_get_unmapped_area().

This fixes it by changing the #ifdef to use CONFIG_PPC_MM_SLICES
in those functions and also in book3e_hugetlb_preload().

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-23 10:21:33 +10:00
Peter Huewe
3321c07ae5 TPM: Zero buffer after copying to userspace
Since the buffer might contain security related data it might be a good idea to
zero the buffer after we have copied it to userspace.

This got assigned CVE-2011-1162.

Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Cc: Stable Kernel <stable@kernel.org>
Signed-off-by: James Morris <jmorris@namei.org>
2011-09-23 09:46:41 +10:00
Peter Huewe
6b07d30aca TPM: Call tpm_transmit with correct size
This patch changes the call of tpm_transmit by supplying the size of the
userspace buffer instead of TPM_BUFSIZE.

This got assigned CVE-2011-1161.

[The first hunk didn't make sense given one could expect
 way less data than TPM_BUFSIZE, so added tpm_transmit boundary
 check over bufsiz instead
 The last parameter of tpm_transmit() reflects the amount
 of data expected from the device, and not the buffer size
 being supplied to it. It isn't ideal to parse it directly,
 so we just set it to the maximum the input buffer can handle
 and let the userspace API to do such job.]

Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Cc: Stable Kernel <stable@kernel.org>
Signed-off-by: James Morris <jmorris@namei.org>
2011-09-23 09:46:29 +10:00
Axel Lin
de69113ec1 TPM: tpm_nsc: Fix a double free of pdev in cleanup_nsc
platform_device_unregister() will release all resources
and remove it from the subsystem, then drop reference count by
calling platform_device_put().

We should not call kfree(pdev) after platform_device_unregister(pdev).

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-09-23 09:46:17 +10:00
Geert Uytterhoeven
5ce5ed3593 TPM: TCG_ATMEL should depend on HAS_IOPORT
On m68k, I get:

drivers/char/tpm/tpm_atmel.h: In function ‘atmel_get_base_addr’:
drivers/char/tpm/tpm_atmel.h:129: error: implicit declaration of function ‘ioport_map’
drivers/char/tpm/tpm_atmel.h:129: warning: return makes pointer from integer without a cast

The code in tpm_atmel.h supports PPC64 (using the device tree and ioremap())
and "anything else" (using ioport_map()). However, ioportmap() is only
available on platforms that set HAS_IOPORT.

Although PC64 seems to have HAS_IOPORT, a "depends on HAS_IOPORT" should work,
but I think it's better to expose the special PPC64 handling explicit using
"depends on PPC64 || HAS_IOPORT".

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2011-09-23 09:45:57 +10:00
Tony Lindgren
48b48fc996 Merge branch 'for_3.2/pm-cleanup' of git://gitorious.org/khilman/linux-omap-pm into cleanup 2011-09-22 16:38:46 -07:00
Tony Lindgren
7a04c4cbf7 Merge branch 'for_3.2/omap_device' of git://gitorious.org/khilman/linux-omap-pm into cleanup 2011-09-22 16:38:39 -07:00
Yong Zhang
9cfb5c05fe TTY: irq: Remove IRQF_DISABLED
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled],
We run all interrupt handlers with interrupts disabled
and we even check and yell when an interrupt handler
returns with interrupts enabled (see commit [b738a50a:
genirq: Warn when handler enables interrupts]).

So now this flag is a NOOP and can be removed.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Acked-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-22 16:08:57 -07:00
Ning Jiang
94abc56f4d serial-core: power up uart port early before we do set_termios when resuming
The following patch removed uart_change_pm() in uart_resume_port():

commit 5933a161ab
Author: Yin Kangkai <kangkai.yin@linux.intel.com>
    serial-core: reset the console speed on resume

It will break the pxa serial driver when the system resumes from suspend mode
as it will try to set baud rate divider register in set_termios but with
clock off. The register value can not be set correctly on some platform if
the clock is disabled. The pxa driver will check the value and report the
following warning:

------------[ cut here ]------------
WARNING: at drivers/tty/serial/pxa.c:545 serial_pxa_set_termios+0x1dc/0x250()
Modules linked in:
[<c0281f30>] (unwind_backtrace+0x0/0xf0) from [<c029341c>] (warn_slowpath_common+0x4c/0x64)
[<c029341c>] (warn_slowpath_common+0x4c/0x64) from [<c029344c>] (warn_slowpath_null+0x18/0x1c)
[<c029344c>] (warn_slowpath_null+0x18/0x1c) from [<c044b1e4>] (serial_pxa_set_termios+0x1dc/0x250)
[<c044b1e4>] (serial_pxa_set_termios+0x1dc/0x250) from [<c044a840>] (uart_resume_port+0x128/0x2dc)
[<c044a840>] (uart_resume_port+0x128/0x2dc) from [<c044bbe0>] (serial_pxa_resume+0x18/0x24)
[<c044bbe0>] (serial_pxa_resume+0x18/0x24) from [<c0454d34>] (platform_pm_resume+0x40/0x4c)
[<c0454d34>] (platform_pm_resume+0x40/0x4c) from [<c0457ebc>] (pm_op+0x68/0xb4)
[<c0457ebc>] (pm_op+0x68/0xb4) from [<c0458368>] (device_resume+0xb0/0xec)
[<c0458368>] (device_resume+0xb0/0xec) from [<c04584c8>] (dpm_resume+0xe0/0x194)
[<c04584c8>] (dpm_resume+0xe0/0x194) from [<c0458588>] (dpm_resume_end+0xc/0x18)
[<c0458588>] (dpm_resume_end+0xc/0x18) from [<c02c518c>] (suspend_devices_and_enter+0x16c/0x1ac)
[<c02c518c>] (suspend_devices_and_enter+0x16c/0x1ac) from [<c02c5278>] (enter_state+0xac/0xdc)
[<c02c5278>] (enter_state+0xac/0xdc) from [<c02c48ec>] (state_store+0xa0/0xbc)
[<c02c48ec>] (state_store+0xa0/0xbc) from [<c0408f7c>] (kobj_attr_store+0x18/0x1c)
[<c0408f7c>] (kobj_attr_store+0x18/0x1c) from [<c034a6a4>] (sysfs_write_file+0x108/0x140)
[<c034a6a4>] (sysfs_write_file+0x108/0x140) from [<c02fb798>] (vfs_write+0xac/0x134)
[<c02fb798>] (vfs_write+0xac/0x134) from [<c02fb8cc>] (sys_write+0x3c/0x68)
[<c02fb8cc>] (sys_write+0x3c/0x68) from [<c027c700>] (ret_fast_syscall+0x0/0x2c)
---[ end trace 88289eceb4675b04 ]---

This patch fix the problem by adding the power on opertion back for uart
console when console_suspend_enabled is true.

Signed-off-by: Ning Jiang <ning.jiang@marvell.com>
Tested-by: Mayank Rana <mrana@codeaurora.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-22 16:08:56 -07:00
Andi Kleen
153d3d9be7 serial: mfd: Initconst section fixes
Cc: gregkh@suse.de
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-22 16:05:09 -07:00
Geert Uytterhoeven
98c2b37353 keyboard: Do not include <linux/irq.>
The top of <linux/irq.h> has this comment:

 * Please do not include this file in generic code.  There is currently
 * no requirement for any architecture to implement anything held
 * within this file.
 *
 * Thanks. --rmk

Remove inclusion of <linux/irq.>, to prevent the following compile error
from happening soon:

| include/linux/irq.h:132: error: redefinition of ‘struct irq_data’
| include/linux/irq.h:286: error: redefinition of ‘struct irq_chip’

drivers/tty/vt/keyboard.c needs to include <asm/irq_regs.h> for get_irq_regs():

| drivers/tty/vt/keyboard.c:497: error: implicit declaration of function ‘get_irq_regs’
| drivers/tty/vt/keyboard.c:497: warning: initialization makes pointer from integer without a cast

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-22 16:05:08 -07:00
Jiri Slaby
3a0db7215c TTY: serial, move 68360 driver to staging
This driver has been broken at least since 2008. At that time,
a88487c79b (Fix compile errors in SGI console drivers) broke this
driver completely.

And since nobody noticed for the past 3 years, move it into staging. I
think this will rot there and we will throw it away completely after
some time. Or maybe someone will volunteer to fix it ;).

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-22 16:00:20 -07:00
WANG Cong
3d43b7d59d cris: lower the printk level in cris serial driver
KERN_CRIT is too high, replace those KERN_CRIT with KERN_ERR or KERN_WARNING.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-22 15:51:30 -07:00
Søren Holm
06315348b1 serial: Support the EFR-register of XR1715x uarts.
The EFR (Enhenced-Features-Register) is located at a different offset
than the other devices supporting UART_CAP_EFR. This change add a special
setup quick to set UPF_EXAR_EFR on the port. UPF_EXAR_EFR is then used to
the port type to PORT_XR17D15X since it is for sure a XR17D15X uart.

Signed-off-by: Søren Holm <sgh@sgh.dk>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-22 15:50:38 -07:00
WANG Cong
2f7861de11 cris: fix a build error in drivers/tty/serial/crisv10.c
This patch fixes the following build error:

drivers/tty/serial/crisv10.c:4453: error: 'if_ser0' undeclared (first use in this function): 2 errors in 2 logs
        v3.1-rc4/cris/cris-allmodconfig v3.1-rc4/cris/cris-allyesconfig
drivers/tty/serial/crisv10.c:4453: error: (Each undeclared identifier is reported only once: 2 errors in 2 logs
        v3.1-rc4/cris/cris-allmodconfig v3.1-rc4/cris/cris-allyesconfig
drivers/tty/serial/crisv10.c:4453: error: for each function it appears in.): 2 errors in 2 logs
        v3.1-rc4/cris/cris-allmodconfig v3.1-rc4/cris/cris-allyesconfig

"if_ser0" is a typo, it should be "if_serial_0".

Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-22 15:50:30 -07:00
Jiri Slaby
ee160a38ee TTY: serial, fix includes in some drivers
linux/tty_flip.h is included in linux/serial_core.h. But this may (and
will) change in the future. Then we would get build errors such as:
.../tty/serial/max3107.c: In function ‘put_data_to_circ_buf’:
.../tty/serial/max3107.c:149:2: error: implicit declaration of function ‘tty_insert_flip_string’

So fix all the drviers which call tty flip buffer helpers to really
include linux/tty_flip.h. And also make sure that those include
linux/tty.h when operating with struct tty_struct.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-22 15:49:26 -07:00
Jiri Slaby
2c16a35310 TTY: serial, remove dead code from 68328
The code is dead at least since 2002. So remove it to not distort git
grep output (about port.tty usage).

Remove the whole do_softirq tasklet as it's noop now.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-22 15:47:54 -07:00
Nobuhiro Iwamatsu
55956216f4 TTY: serial: Move mutex_unlock in uart_close function
When mutex_lock is not called, mutex_unlock is sometimes called.
This deletes unnecessary goto and makes modifications so that
mutex_unlock is called.

[    8.304000] WARNING: at kernel/muex-debug.c:78
[    8.304000] Modules linked in:
[    8.304000]
[    8.304000] Pid : 114, Comm:                 modprobe
[    8.304000] CPU : 0                  Not tainted  (3.1.0-rc3-next-20110826 #810)
[    8.304000]
[    8.304000] PC is at debug_mutex_unlock+0xf4/0x120
[    8.304000] PR is at debug_mutex_unlock+0xe6/0x120
[    8.304000] PC  : 80051114 SP  : 9f02de58 SR  : 400081f1 TEA : 295cf4f2
[    8.304000] R0  : 00000001 R1  : 00000000 R2  : 0000000f R3  : 00000000
[    8.304000] R4  : 9fc63158 R5  : 00000000 R6  : 00000001 R7  : 9fe1de78
[    8.304000] R8  : 805c6b2c R9  : 80003920 R10 : 00000000 R11 : 805c6b2c
[    8.304000] R12 : 80425ca0 R13 : 00000000 R14 : 9f02de58
[    8.304000] MACH: 00000003 MACL: 00000000 GBR : 296e1678 PR  : 80051106
[    8.304000]
[    8.304000] Call trace:
[    8.304000]  [<804236c6>] __mutex_unlock_slowpath+0x46/0x120
[    8.304000]  [<804237aa>] mutex_unlock+0xa/0x20
[    8.304000]  [<80240ed6>] uart_close+0x76/0x2c0
[    8.304000]  [<80223b98>] tty_release+0xf8/0x5c0
[    8.304000]  [<800a93a6>] lookup_object+0x26/0xa0
[    8.304000]  [<80063f6a>] call_rcu+0x8a/0xc0
[    8.304000]  [<800a944a>] put_object+0x2a/0x60
[    8.304000]  [<80003920>] arch_local_irq_restore+0x0/0x40
[    8.304000]  [<800af320>] fput+0x180/0x2c0
[    8.304000]  [<800af248>] fput+0xa8/0x2c0
[    8.304000]  [<800ab1a8>] filp_close+0x48/0xc0
[    8.304000]  [<800ab29a>] sys_close+0x7a/0x100
[    8.304000]  [<8000825a>] syscall_call+0xc/0x10
[    8.304000]  [<800ab220>] sys_close+0x0/0x100
[    8.304000]
[    8.304000] Code:
[    8.304000]   8005110e:  mov.l     @r1, r1
[    8.304000]   80051110:  tst       r1, r1
[    8.304000]   80051112:  bf        80051116
[    8.304000] ->80051114:  trapa     #62
[    8.304000]   80051116:  mov.l     @r8, r1
[    8.304000]   80051118:  tst       r1, r1
[    8.304000]   8005111a:  bt.s      8005104c
[    8.304000]   8005111c:  mov       #0, r1
[    8.304000]   8005111e:  bra       80051056
[    8.304000]
[    8.304000] ---[ end trace e8f8e04c313f429b ]---

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-22 15:47:53 -07:00
Marcus Folkesson
e44aabd649 serial: pxa: work around for errata #20
Errata E20: UART: Character Timeout interrupt remains set under certain
software conditions.

Implication: The software servicing the UART can be trapped in an infinite loop.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-22 15:47:53 -07:00
Wolfram Sang
7b72c9f875 powerpc: update 512x-defconfig
Activate all MPC512x related boards. Also enable GPIO-driver, SPI driver
and at25 to test SPI. Enable DEVTMPFS. Bump to 3.1-rc6.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-09-23 00:20:07 +02:00
Wolfram Sang
c68308dd50 gpio: move mpc8xxx/512x gpio driver to drivers/gpio
Move the driver to the place where it is expected to be nowadays. Also
rename its CONFIG-name to match the rest and adapt the defconfigs.
Finally, move selection of REQUIRE_GPIOLIB or WANTS_OPTIONAL_GPIOLIB to
the platforms, because this option is per-platform and not per-driver.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-09-23 00:14:15 +02:00
Russell King
b0a37dca72 Merge branch 'pm' into devel-stable 2011-09-22 22:39:23 +01:00
David Rientjes
e369fde1af thp: fix khugepaged defrag tunable documentation
Commit e27e6151b1 ("mm/thp: use conventional format for boolean
attributes") changed

  /sys/kernel/mm/transparent_hugepage/khugepaged/defrag

to be tuned by using 1 (enabled) or 0 (disabled) instead of "yes" and
"no", respectively.

Update the documentation.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-22 14:27:14 -07:00
Timur Tabi
40dc7e8b4a powerpc/5200: enable audio in the defconfig
Audio support for the MPC5200 exists, so enable it by default.

Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-09-22 23:24:06 +02:00
Anatolij Gustschin
5d9e6ac843 powerpc/5200: dts: digsy_mtc.dts: enable both MSCAN nodes
We use both MSCAN controllers on this board, so do not disable
them in the device tree.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-09-22 23:18:33 +02:00
Anatolij Gustschin
1982c09a64 powerpc/5200: dts: digsy_mtc.dts: add timer0 and timer1 gpio properties
timer0 and timer1 pins are used as simple GPIO on this board.
Add gpio-controller and #gpio-cells properties to timer nodes
so that we can control gpio lines using available MPC52xx
GPT driver.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-09-22 23:14:03 +02:00
Anatolij Gustschin
aa4593f274 powerpc/5200: dts: digsy_mtc.dts: update to add can, pci, serial and spi
Add new nodes to describe more hardware the board is
equipped with:
 - two can nodes for SJA1000 on localbus
 - pci node to support Coral-PA graphics controller
 - serial node for SC28L92 DUART on localbus
 - spi node for MSP430 device

Also correct i2c eeprom node name.

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-09-22 23:13:50 +02:00
Anatolij Gustschin
6cf1d0b806 powerpc/5200: mpc5200b.dtsi: add spi node address- and size-cells properties
Both, #address-cells and #size-cells properties are required
for spi bus node, so add them.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-09-22 23:13:40 +02:00
Olaf Hering
ddacf5ef68 xen/pv-on-hvm kexec: add xs_reset_watches to shutdown watches from old kernel
Add new xs_reset_watches function to shutdown watches from old kernel after
kexec boot.  The old kernel does not unregister all watches in the
shutdown path.  They are still active, the double registration can not
be detected by the new kernel.  When the watches fire, unexpected events
will arrive and the xenwatch thread will crash (jumps to NULL).  An
orderly reboot of a hvm guest will destroy the entire guest with all its
resources (including the watches) before it is rebuilt from scratch, so
the missing unregister is not an issue in that case.

With this change the xenstored is instructed to wipe all active watches
for the guest.  However, a patch for xenstored is required so that it
accepts the XS_RESET_WATCHES request from a client (see changeset
23839:42a45baf037d in xen-unstable.hg). Without the patch for xenstored
the registration of watches will fail and some features of a PVonHVM
guest are not available. The guest is still able to boot, but repeated
kexec boots will fail.

[v5: use xs_single instead of passing a dummy string to xs_talkv]
[v4: ignore -EEXIST in xs_reset_watches]
[v3: use XS_RESET_WATCHES instead of XS_INTRODUCE]
[v2: move all code which deals with XS_INTRODUCE into xs_introduce()
    (based on feedback from Ian Campbell); remove casts from kvec assignment]
Signed-off-by: Olaf Hering <olaf@aepfle.de>
[v1: Redid the git description a bit]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-22 16:32:24 -04:00
Olaf Hering
3b082b25c0 xen/pv-on-hvm kexec: update xs_wire.h:xsd_sockmsg_type from xen-unstable
Update include/xen/interface/io/xs_wire.h from xen-unstable.
Now entries in xsd_sockmsg_type were added.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-22 16:32:04 -04:00
Jan Beulich
55e901fc1f xen/pci: support multi-segment systems
Now that the hypercall interface changes are in -unstable, make the
kernel side code not ignore the segment (aka domain) number anymore
(which results in pretty odd behavior on such systems). Rather, if
only the old interfaces are available, don't call them for devices on
non-zero segments at all.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
[v1: Edited git description]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-09-22 16:23:46 -04:00
Ian Campbell
0e0634d20d vmxnet3: convert to SKB paged frag API.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Shreyas Bhatewara <sbhatewara@vmware.com>
Cc: "VMware, Inc." <pv-drivers@vmware.com>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-22 16:04:19 -04:00
Ian Campbell
86ee8130a4 virtionet: convert to SKB paged frag API.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-22 16:04:18 -04:00
Ian Campbell
e4cb193f79 via-velocity: convert to SKB paged frag API.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Francois Romieu <romieu@fr.zoreil.com>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-22 16:04:17 -04:00
Ian Campbell
2098401c4c typhoon: convert to SKB paged frag API.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: David Dillow <dave@thedillows.org>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-22 16:04:17 -04:00
Ian Campbell
ea968771d4 tsi108: convert to SKB paged frag API.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-22 16:04:16 -04:00
Ian Campbell
e4811086b7 tehuti: convert to SKB paged frag API.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Alexander Indenbaum <baum@tehutinetworks.net>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-22 16:04:16 -04:00
Ian Campbell
4bc683472b sunhme: convert to SKB paged frag API.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-22 16:04:16 -04:00
Ian Campbell
4fee78b49c sungem: convert to SKB paged frag API.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-22 16:04:16 -04:00
Ian Campbell
f722380d25 stmmac: convert to SKB paged frag API.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-22 16:04:16 -04:00
Ian Campbell
0cd83cc020 starfire: convert to SKB paged frag API.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-22 16:04:15 -04:00