Commit graph

286,663 commits

Author SHA1 Message Date
Linus Torvalds
c835490196 Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms/evergreen: emit SQ_LDS_RESOURCE_MGMT for blits
  agp/intel: Fix typo in G4x_GMCH_SIZE_VT_2M
  drm/radeon/kms: fix typo in read_disabled vbios code
  drm/radeon/kms: use correct BUS_CNTL reg on rs600
  drm/radeon/kms: fix backend map typo on juniper
  drm/radeon/kms: fix regression in hotplug
2011-07-13 14:04:26 -07:00
Linus Torvalds
5d7d5d9332 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits)
  slip: fix wrong SLIP6 ifdef-endif placing
  natsemi: fix another dma-debug report
  sctp: ABORT if receive, reassmbly, or reodering queue is not empty while closing socket
  net: Fix default in docs for tcp_orphan_retries.
  hso: fix a use after free condition
  net/natsemi: Fix module parameter permissions
  XFRM: Fix memory leak in xfrm_state_update
  sctp: Enforce retransmission limit during shutdown
  mac80211: fix TKIP replay vulnerability
  mac80211: fix ie memory allocation for scheduled scans
  ssb: fix init regression of hostmode PCI core
  rtlwifi: rtl8192cu: Add new USB ID for Netgear WNA1000M
  ath9k: Fix tx throughput drops for AR9003 chips with AES encryption
  carl9170: add NEC WL300NU-AG usbid
  cfg80211: fix deadlock with rfkill/sched_scan by adding new mutex
  ath5k: fix incorrect use of drvdata in PCI suspend/resume code
  ath5k: fix incorrect use of drvdata in sysfs code
  Bluetooth: Fix memory leak under page timeouts
  Bluetooth: Fix regression with incoming L2CAP connections
  Bluetooth: Fix hidp disconnect deadlocks and lost wakeup
  ...
2011-07-13 13:51:32 -07:00
Chris Wilson
99834ea446 drm/i915/bios: Avoid temporary allocation whilst searching for downclock
Alan Cox reported a missing check on the kmalloc return value for the
allocation of a temporary mode used for searching for the LVDS downlock
frequency. This allocation is roughly 200 bytes, a little too large to
friviously place on the stack. However, we can simply use the few bytes
we need stored within the original DVO timing data, skip the translation
and do the compare directly between the timing data rather than on a
mode, thus avoiding the need for any temporary allocations.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-13 13:35:34 -07:00
Richard Kennedy
d7b7630130 block: reorder request_queue to remove 64 bit alignment padding
Reorder request_queue to remove 16 bytes of alignment padding in 64 bit
builds.

On my config this shrinks the size of this structure from 1608 to 1592
bytes and therefore needs one fewer cachelines.

Also trivially move the open bracket { to be on the same line as the
structure name to make it easier to grep.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-07-13 21:17:49 +02:00
Philip Rakity
f39b2dd9d0 mmc: core: Bus width testing needs to handle suspend/resume
On reading the ext_csd for the first time (in 1 bit mode), save the
ext_csd information needed for bus width compare.

On every pass we make re-reading the ext_csd, compare the data
against the saved ext_csd data.

This fixes a regression introduced in 3.0-rc1 by 08ee80cc39
("mmc: core: eMMC bus width may not work on all platforms"), which
incorrectly assumed we would be re-reading the ext_csd at resume-
time.

Signed-off-by: Philip Rakity <prakity@marvell.com>
Tested-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-13 14:54:37 -04:00
Johannes Berg
95acac61ba mac80211: allow driver to disconnect after resume
In WoWLAN, devices may use crypto keys for TX/RX
and could also implement GTK rekeying. If the
driver isn't able to retrieve replay counters and
similar information from the device upon resume,
or if the device isn't responsive due to platform
issues, it isn't safe to keep the connection up
as GTK rekey messages from during the sleep time
could be replayed against it.

The only protection against that is disconnecting
from the AP. Modifying mac80211 to do that while
it is resuming would be very complex and invasive
in the case that the driver requires a reconfig,
so do it after it has resumed completely. In that
case, however, packets might be replayed since it
can then only happen after TX/RX are up again, so
mark keys for interfaces that need to disconnect
as "tainted" and drop all packets that are sent
or received with those keys.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13 14:49:43 -04:00
Mohammed Shafi Shajakhan
2fcf282471 mac80211: remove a redundant check
is_valid_ether_addr itself checks for is_zero_ether_addr

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13 14:49:42 -04:00
Yogesh Ashok Powar
5d82c53a38 mwifiex: add cfg80211 handler for set_bitrate_mask
Currently, setting only legacy bitrates on 2.4GHz band
are supported. Mode 802.11b/g/bg is enabled based on
bitrates selection. If only CCK bitrates selected then
802.11b mode is enabled. If only OFDM bitrates are
selected then 802.11g mode is enabled. For both: CCK
and OFDM rates 802.11bg mixed mode is enabled.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13 14:49:42 -04:00
Felix Fietkau
4e868796bb ath5k: do not call ieee80211_stop_queue for queues not managed by mac80211
Instead of using ieee80211_stop_queue, check the configured tx queue
limit before calling ieee80211_get_buffered_bc.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13 14:49:41 -04:00
Felix Fietkau
6340211c5f ath5k: disable 32KHz sleep clock operation by default
While 32 KHz sleep clock might provide some power saving benefits,
it is also a major source of stability issues, on OpenWrt it produced
some reproducible data bus errors on register accesses on several
different MIPS platforms.

All the Atheros drivers that I can find do not enable this feature,
so it makes sense to leave it disabled in ath5k as well.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13 14:49:40 -04:00
Felix Fietkau
f00643888c ath5k: fix reference clock usec duration setting restore
enabling the sleep clock alters the AR5K_USEC_32 field, but disabling
it didn't restore it.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13 14:49:40 -04:00
Felix Fietkau
fe00deb3e4 ath5k: delay full calibration after reset
During scans the full calibration usually does not make much sense,
PAPD probing and IQ calibration should be deferred until there is
enough time to complete them. Adding 100 ms to the initial full
calibration delay should be enough to do this.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13 14:49:39 -04:00
Felix Fietkau
26d16d23e6 ath5k: initialize common->clockrate
Fixes a division by zero when setting distance before activating the
device for the first time.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13 14:49:38 -04:00
Felix Fietkau
2d2cf471d5 ath5k: fix reference clock frequency for spur mitigation on AR2413
AR2413 uses the same reference clock as AR5413

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13 14:49:37 -04:00
Felix Fietkau
ca8bfd94bb ath5k: apply the synth voltage tweak only on AR5112 rev 2
Might fix some stability issues on newer chips

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13 14:49:37 -04:00
Felix Fietkau
b613c7262d ath5k: add missing checks for rfgain probe
rfgain probe is only necessary for OFDM operation on AR5111 and AR5112.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13 14:49:36 -04:00
Senthil Balasubramanian
0472ade031 ath9k_hw: Fix incorrect key_miss handling
Decryping frames on key_miss handling shouldn't be done for Michael
MIC failed frames as h/w would have already decrypted such frames
successfully anyway.

Also leaving CRC and PHY error(where the frame is going to be dropped
anyway), we are left to prcoess Decrypt error for which s/w decrypt is
selected anway and so having key_miss as a separate check doesn't serve
anything. So making key_miss handling mutually exlusive with other RX
status handling makes much more sense.

This patch addresses an issue with STA not reporting MIC failure events
resulting in STA being disconnected immediately.

Cc: stable@kernel.org
Signed-off-by: Senthil Balasubramanian <senthilb@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13 14:49:35 -04:00
Joe Perches
2a897d41a3 iwlagn: Add missing comma between constant string array
Multiple quoted strings are concatenated without comma separators.

Make the array const while there.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13 14:49:35 -04:00
Joe Perches
861d9c3f25 iwlegacy: Add missing comma between constant string array
Multiple quoted strings are concatenated without comma separators.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-13 14:49:34 -04:00
Rafael J. Wysocki
07e49a7a31 ACPI: Fix lockdep false positives in acpi_power_off()
All ACPICA locks are allocated by the same function,
acpi_os_create_lock(), with the help of a local variable called
"lock".  Thus, when lockdep is enabled, it uses "lock" as the
name of all those locks and regards them as instances of the same
lock, which causes it to report possible locking problems with them
when there aren't any.

To work around this problem, define acpi_os_create_lock() as a macro
and make it pass its argument to spin_lock_init(), so that lockdep
uses it as the name of the new lock.  Define this macron in a
Linux-specific file, to minimize the resulting modifications of
the OS-independent ACPICA parts.

This change is based on an earlier patch from Andrea Righi and it
addresses a regression from 2.6.39 tracked as
https://bugzilla.kernel.org/show_bug.cgi?id=38152

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Andrea Righi <andrea@betterlinux.com>
Reviewed-by: Florian Mickler <florian@mickler.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2011-07-13 14:49:09 -04:00
Chris Wilson
95736720fc drm/i915: Cache GT fifo count for SandyBridge
The read back of the available FIFO entries is vital for system
stability, but extremely costly. However, we only need a guide so as to
avoid eating into the reserved entries and since we are the only
consumer we can cache the read of the count from the last write.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-13 11:28:07 -07:00
Andy Lutomirski
433bd805e5 clocksource: Replace vread with generic arch data
The vread field was bloating struct clocksource everywhere except
x86_64, and I want to change the way this works on x86_64, so let's
split it out into per-arch data.

Cc: x86@kernel.org
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: linux-ia64@vger.kernel.org
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andy Lutomirski <luto@mit.edu>
Link: http://lkml.kernel.org/r/3ae5ec76a168eaaae63f08a2a1060b91aa0b7759.1310563276.git.luto@mit.edu
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-13 11:23:12 -07:00
Andy Lutomirski
7f79ad15f3 x86-64: Add --no-undefined to vDSO build
This gives much nicer diagnostics when something goes wrong.  It's
supported at least as far back as binutils 2.15.

Signed-off-by: Andy Lutomirski <luto@mit.edu>
Link: http://lkml.kernel.org/r/de0b50920469ff6359c529526e7639fdd36fa83c.1310563276.git.luto@mit.edu
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-13 11:23:09 -07:00
Andy Lutomirski
1b3f2a72bb x86-64: Allow alternative patching in the vDSO
This code is short enough and different enough from the module
loader that it's not worth trying to share anything.

Signed-off-by: Andy Lutomirski <luto@mit.edu>
Link: http://lkml.kernel.org/r/e73112e4381fff29e31b882c2d0856822edaea53.1310563276.git.luto@mit.edu
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-13 11:23:07 -07:00
Andy Lutomirski
59e97e4d6f x86: Make alternative instruction pointers relative
This save a few bytes on x86-64 and means that future patches can
apply alternatives to unrelocated code.

Signed-off-by: Andy Lutomirski <luto@mit.edu>
Link: http://lkml.kernel.org/r/ff64a6b9a1a3860ca4a7b8b6dc7b4754f9491cd7.1310563276.git.luto@mit.edu
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-13 11:22:56 -07:00
Andy Lutomirski
c9712944b2 x86-64: Improve vsyscall emulation CS and RIP handling
Three fixes here:
 - Send SIGSEGV if called from compat code or with a funny CS.
 - Don't BUG on impossible addresses.
 - Add a missing local_irq_disable.

This patch also removes an unused variable.

Signed-off-by: Andy Lutomirski <luto@mit.edu>
Link: http://lkml.kernel.org/r/6fb2b13ab39b743d1e4f466eef13425854912f7f.1310563276.git.luto@mit.edu
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-13 11:22:55 -07:00
Matthew Garrett
f5a3d0c408 i915: Fix opregion notifications
opregion-based platforms will send ACPI video event 0x80 for a range of
notification types for legacy compatibility. This is interpreted as a
display switch event, which may not be appropriate in the circumstances.
When we receive such an event we should make sure that the platform is
genuinely requesting a display switch before passing that event through
to userspace.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Tested-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
2011-07-13 11:19:47 -07:00
Keith Packard
2bf71160f9 drm/i915: TVDAC_STATE_CHG does not indicate successful load-detect
Do not use this bit to indicate that load detection has completed,
instead just wait for vblank, at which point the load registers will
have been updated.

Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Yi Sun <yi.sun@intel.com>
2011-07-13 11:07:55 -07:00
Keith Packard
835bff7ef2 drm/i915: Select correct pipe during TV detect
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Yi Sun <yi.sun@intel.com>
2011-07-13 11:07:24 -07:00
Jon Medhurst
8f2ffa00fb ARM: kprobes: Remove now unused code
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-07-13 17:32:51 +00:00
Jon Medhurst
0239269db6 ARM: kprobes: Decode ARM preload (immediate) instructions
These were missing from the previous implementation.

Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-07-13 17:32:51 +00:00
Jon Medhurst
465f1ea595 ARM: kprobes: Reject probing of unprivileged load and store instructions
These occur extremely rarely in the kernel and writing test cases for
them is difficult.

Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-07-13 17:32:51 +00:00
Jon Medhurst
711bf10633 ARM: kprobes: Use new versions of emulate_ldr() and emulate_str()
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-07-13 17:32:51 +00:00
Jon Medhurst
3c48fbb147 ARM: kprobes: Add new versions of emulate_ldr() and emulate_str()
These use the register calling conventions required by the new decoding
table framework for calling simulated instructions.

We rename the old versions of these functions to *_old for now.

Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-07-13 17:32:50 +00:00
Jon Medhurst
12ce5d3388 ARM: kprobes: Add emulate_rdlo12rdhi16rn0rm8_rwflags_nopc()
This is the emulation function for the instruction format used by the
ARM multiply long instructions. It replaces use of
prep_emulate_rdhi16rdlo12rs8rm0_wflags().

Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-07-13 17:32:50 +00:00
Jon Medhurst
c82584ebdf ARM: kprobes: Add emulate_rd12rm0_noflags_nopc()
This is the emulation function for the instruction format used by the
ARM bit-field manipulation instructions.

Various other instruction forms can also make use of this and it is used
to replace use of prep_emulate_rd12{rm0}{_modify}

Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-07-13 17:32:50 +00:00
Jon Medhurst
35fab77469 ARM: kprobes: Replace use of prep_emulate_rd12rn16rm0_wflags()
These can now use emulate_rd12rn16rm0_rwflags_nopc().

Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-07-13 17:32:50 +00:00
Jon Medhurst
6091dfae4f ARM: kprobes: Add emulate_rd16rn12rm0rs8_rwflags_nopc()
This is the emulation function for the instruction format used by the
ARM multiply-accumulate instructions. These don't allow use of PC so we
don't have to add special cases for this.

This function is used to replace use of prep_emulate_rd16rs8rm0_wflags
and prep_emulate_rd16rn12rs8rm0_wflags.

Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-07-13 17:32:50 +00:00
Jon Medhurst
e9a92859e9 ARM: kprobes: Migrate remaining instruction decoding functions to tables
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-07-13 17:32:50 +00:00
Jon Medhurst
0d32e7d11b ARM: kprobes: Migrate ARM space_cccc_100x to decoding tables
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-07-13 17:32:50 +00:00
Jon Medhurst
56d8fbddc2 ARM: kprobes: Migrate ARM space_cccc_01xx to decoding tables
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-07-13 17:32:49 +00:00
Jon Medhurst
ad2e81a78d ARM: kprobes: Migrate ARM space_cccc_0111__1 to decoding tables
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-07-13 17:32:49 +00:00
Jon Medhurst
2ce5d03307 ARM: kprobes: Migrate ARM space_cccc_0110__1 to decoding tables
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-07-13 17:32:49 +00:00
Jon Medhurst
0e44e9a0fa ARM: kprobes: Add emulate_rd12rn16rm0_rwflags_nopc()
This is the emulation function for the instruction format used by the
ARM media instructions.

Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-07-13 17:32:49 +00:00
Jon Medhurst
c038f3af50 ARM: kprobes: Migrate ARM space_cccc_001x to decoding tables
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-07-13 17:32:49 +00:00
Jon Medhurst
75f115c087 ARM: kprobes: Migrate ARM space_cccc_000x to decoding tables
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-07-13 17:32:49 +00:00
Jon Medhurst
6c8a192929 ARM: kprobes: Migrate ARM LDRD and STRD to decoding tables
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-07-13 17:32:49 +00:00
Jon Medhurst
8723942f7b ARM: kprobes: Add emulate_ldrdstrd()
This is an emulation function for the LDRD and STRD instructions.

Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-07-13 17:32:48 +00:00
Jon Medhurst
3535a89ab2 ARM: kprobes: Migrate ARM data-processing (register) instructions to decoding tables
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-07-13 17:32:48 +00:00
Jon Medhurst
9f596e5126 ARM: kprobes: Add emulate_rd12rn16rm0rs8_rwflags()
This is the emulation function for the instruction format used by the
ARM data-processing instructions.

Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-07-13 17:32:48 +00:00