Commit graph

286,663 commits

Author SHA1 Message Date
David S. Miller
957c665f37 ipv6: Don't put artificial limit on routing table size.
IPV6, unlike IPV4, doesn't have a routing cache.

Routing table entries, as well as clones made in response
to route lookup requests, all live in the same table.  And
all of these things are together collected in the destination
cache table for ipv6.

This means that routing table entries count against the garbage
collection limits, even though such entries cannot ever be reclaimed
and are added explicitly by the administrator (rather than being
created in response to lookups).

Therefore it makes no sense to count ipv6 routing table entries
against the GC limits.

Add a DST_NOCOUNT destination cache entry flag, and skip the counting
if it is set.  Use this flag bit in ipv6 when adding routing table
entries.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01 17:30:43 -07:00
David S. Miller
11d53b4990 ipv6: Don't change dst->flags using assignments.
This blows away any flags already set in the entry.

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01 17:30:43 -07:00
Arnd Bergmann
6e4e2f811b 6pack,mkiss: fix lock inconsistency
Lockdep found a locking inconsistency in the mkiss_close function:

> kernel: [ INFO: inconsistent lock state ]
> kernel: 2.6.39.1 #3
> kernel: ---------------------------------
> kernel: inconsistent {IN-SOFTIRQ-R} -> {SOFTIRQ-ON-W} usage.
> kernel: ax25ipd/2813 [HC0[0]:SC0[0]:HE1:SE1] takes:
> kernel: (disc_data_lock){+++?.-}, at: [<ffffffffa018552b>] mkiss_close+0x1b/0x90 [mkiss]
> kernel: {IN-SOFTIRQ-R} state was registered at:

The message hints that disc_data_lock is aquired with softirqs disabled,
but does not itself disable softirqs, which can in rare circumstances
lead to a deadlock. 
The same problem is present in the 6pack driver, this patch fixes both
by using write_lock_bh instead of write_lock.

Reported-by: Bernard F6BVP <f6bvp@free.fr>
Tested-by: Bernard F6BVP <f6bvp@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ralf Baechle<ralf@linux-mips.org>
Cc: stable@kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01 17:30:00 -07:00
Linus Torvalds
c66a86d0cd Merge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6
* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6:
  drm/i915: apply HWSTAM writes to Ivy Bridge as well
  drm/i915: move IRQ function table init to i915_irq.c
  drm/i915/overlay: Fix unpinning along init error paths
  drm/i915: Don't call describe_obj on NULL pointers
  drm/i915: Hold struct_mutex during i915_save_state/i915_restore_state
2011-07-01 16:38:59 -07:00
David S. Miller
aea54bce01 Merge branch 'for-next' of git://git2.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan 2011-07-01 16:16:48 -07:00
Greg Dietsche
3e878b8d54 net: rds: fix const array syntax
Correct the syntax so that both array and pointer are const.

Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01 16:16:19 -07:00
Joe Perches
fddc5f3e91 x25: Reduce switch/case indent
Make the case labels the same indent as the switch.

git diff -w shows 80 column line reflowing.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01 16:11:16 -07:00
Joe Perches
89f0e4feaf sunrpc: Reduce switch/case indent
Make the case labels the same indent as the switch.

git diff -w shows 80 column line reflowing.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01 16:11:16 -07:00
Joe Perches
7fd71b1e07 sctp: Reduce switch/case indent
Make the case labels the same indent as the switch.

git diff -w shows useless break;s removed after returns
and a comment added to an unnecessary default: break;
because of a dubious gcc warning.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01 16:11:16 -07:00
Joe Perches
c485538901 netrom: Reduce switch/case indent
Make the case labels the same indent as the switch.

git diff -w shows code on same line as case moved
to separate lines and a "/* Fallthrough */" comment
added where appropriate.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01 16:11:16 -07:00
Joe Perches
fcb261f357 lapb: Reduce switch/case indent
Make the case labels the same indent as the switch.

git diff -w shows 80 column reflowing.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01 16:11:16 -07:00
Joe Perches
207ec0abbe ipv6: Reduce switch/case indent
Make the case labels the same indent as the switch.

git diff -w shows 80 column reflowing,
removal of a useless break after return, and moving
open brace after case instead of separate line.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01 16:11:16 -07:00
Joe Perches
4500ebf8d1 ipv4: Reduce switch/case indent
Make the case labels the same indent as the switch.

git diff -w shows no difference.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01 16:11:16 -07:00
Joe Perches
181b1e9ce1 netfilter: Reduce switch/case indent
Make the case labels the same indent as the switch.

git diff -w shows miscellaneous 80 column wrapping,
comment reflowing and a comment for a useless gcc
warning for an otherwise unused default: case.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01 16:11:15 -07:00
Joe Perches
1d67a51682 ipconfig: Reduce switch/case indent
Make the case labels the same indent as the switch.

git diff -w shows miscellaneous 80 column wrapping.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01 16:11:15 -07:00
Joe Perches
075e1913e1 econet: Reduce switch/case indent
Make the case labels the same indent as the switch.

Simplify a default case / return (unreached)
Remove unnecessary break after return.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01 16:11:15 -07:00
Joe Perches
06f8fe11bb decnet: Reduce switch/case indent
Make the case labels the same indent as the switch.

git diff -w shows differences for line wrapping.
(fit multiple lines to 80 columns, join where possible)

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01 16:11:15 -07:00
Joe Perches
4a9e4b0932 appletalk: Reduce switch/case indent
Make the case labels the same indent as the switch.

(git diff -w net/appletalk shows no difference)

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01 16:11:15 -07:00
Guenter Roeck
0e502ec889 hwmon: (pmbus) Auto-detect temp2 and temp3 registers/attributes
Additional temperature attribute support is easy to detect, so do it.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
Cc: stable.kernel.org # 2.6.39
2011-07-01 15:56:07 -07:00
Guenter Roeck
81ae68142a hwmon: (pmbus) Improve fan detection
Some PMBus devices return no error when reading fan speed registers, but don't
really support fans. Strengthen fan detection by also checking if fan
configuration registers exist.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
Cc: stable.kernel.org # 2.6.39
2011-07-01 15:56:06 -07:00
Guenter Roeck
3b33ca4122 hwmon: (adm1275) Free allocated memory if probe function fails
Probe function did not free allocated memory if it failed. Fix it.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-07-01 15:56:06 -07:00
Guenter Roeck
7f2c0662e5 hwmon: (pmbus) Drop check for PMBus revision register in probe function
Some PMBus devices do not support the PMBus revision register, so don't check
if it exists.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
Cc: stable.kernel.org # 2.6.39
2011-07-01 15:56:05 -07:00
Andrew McGregor
7b292b4bf9 tty: fix "IRQ45: nobody cared"
Unthrottling the TTY during close ends up enabling interrupts
on a device not on the active list, which will never have the
interrupts cleared.  Doctor, it hurts when I do this.

>>> On 6/2/2011 at 01:56 AM, in message <20110601145608.3e586e16@bob.linux.org.uk>, Alan Cox <alan@linux.intel.com> wrote:
> On Wed, 01 Jun 2011 10:34:07 +1200
> "andrew mcgregor" <andrew.mcgregor@alliedtelesis.co.nz> wrote:
> > The LKML message
> > http://kerneltrap.org/mailarchive/linux-kernel/2010/2/25/4541847 from
> > February doesn't seem to have been resolved since.  We struck the
> > issue, and the patch below (against 2.6.32) fixes it.  Should I
> > supply a patch against 3.0.0rc?
>
> I think that would be sensible. I don't actually see how you hit it as
> the IRQ ought to be masked by then but it's certainly wrong for n_tty
> to be calling into check_unthrottle at that point.
>
> So yes please send a patch with a suitable Signed-off-by: line to
> linux-serial and cc GregKH <greg@kroah.com> as well.
>
> Alan

Signed-off-by: Andrew McGregor <andrew.mcgregor@alliedtelesis.co.nz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 15:40:19 -07:00
Thomas Graf
4e985adaa5 rtnl: provide link dump consistency info
This patch adds a change sequence counter to each net namespace
which is bumped whenever a netdevice is added or removed from
the list. If such a change occurred while a link dump took place,
the dump will have the NLM_F_DUMP_INTR flag set in the first
message which has been interrupted and in all subsequent messages
of the same dump.

Note that links may still be modified or renamed while a dump is
taking place but we can guarantee for userspace to receive a
complete list of links and not miss any.

Testing:
I have added 500 VLAN netdevices to make sure the dump is split
over multiple messages. Then while continuously dumping links in
one process I also continuously deleted and re-added a dummy
netdevice in another process. Multiple dumps per seconds have
had the NLM_F_DUMP_INTR flag set.

I guess we can wait for Johannes patch to hit net-next via the
wireless tree.  I just wanted to give this some testing right away.

Signed-off-by: Thomas Graf <tgraf@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01 15:39:53 -07:00
J Freyensee
8168e9c2de PTI feature to allow user to name and mark masterchannel request.
This feature addition provides a new parameter in
pti_request_masterchannel() to allow the user
to provide their own name to mark the request when
the trace is viewed in a PTI SW trace viewer
(like MPTA).  If a name is not provided and
NULL is provided, the 'current' process name is used.
API function header documentation documents this.

Signed-off-by: Jeremy Rocher <rocher.jeremy@gmail.com>
Signed-off-by: J Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 15:39:38 -07:00
J Freyensee
fc360ee7a7 0 for o PTI Makefile bug.
This patch fixes an issue where 'obj' was actually
spelled '0bj' and would skip compiling the pti driver.

Signed-off-by: J Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 15:38:43 -07:00
MyungJoo Ham
aef7fe5274 tty: serial: samsung.c remove legacy PM code.
This patch "modernize" tty/serial/samsung.c to use non-legacy code for
suspend/resume.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: KyungMin Park <kyungmin.park@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 15:38:03 -07:00
Ralf Baechle
f2eb3cdf14 SERIAL: SC26xx: Fix link error.
Kconfig allows enabling console support for the SC26xx driver even when
it's configured as a module resulting in a:

ERROR: "uart_console_device" [drivers/tty/serial/sc26xx.ko] undefined!

modpost error since the driver was merged in
eea63e0e8a [SC26XX: New serial driver for
SC2681 uarts] in 2.6.25.  Fixed by only allowing console support to be
enabled if the driver is builtin.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-serial@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: stable <stable@kernel.org>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 15:38:03 -07:00
Mika Westerberg
9c00c6e7f9 serial: mrst_max3110: initialize waitqueue earlier
The driver went to initialize its waitqueue at the start of the main processing
thread. However, it is possible that this thread is not scheduled on a CPU
before the write function is called which leads to a following error:

 BUG: spinlock bad magic on CPU#1, swapper/1
  lock: f5f3ebdc, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
 Pid: 1, comm: swapper Not tainted 3.0.0-rc2+ #67
 Call Trace:
  [<c1289663>] spin_bug+0xa3/0xf0
  [<c12897ad>] do_raw_spin_lock+0x7d/0x150
  [<c1490006>] ? init_idle+0x8d/0x20c
  [<c14963de>] _raw_spin_lock_irqsave+0x4e/0x60
  [<c102f2bb>] ? __wake_up+0x1b/0x50
  [<c102f2bb>] __wake_up+0x1b/0x50
  [<c12d03bc>] ? uart_console_write+0x4c/0x60
  [<c12d36c0>] ? serial_m3110_enable_ms+0x10/0x10
  [<c12d3715>] serial_m3110_con_write+0x55/0x60
  [<c1041575>] __call_console_drivers+0x75/0x90
  [<c10415d9>] _call_console_drivers+0x49/0x80
  [<c1041baa>] console_unlock+0xca/0x1f0
  [<c10420ef>] vprintk+0x18f/0x4f0
  [<c10787cb>] ? trace_hardirqs_on+0xb/0x10
  [<c14928a3>] printk+0x18/0x1a
  [<c1042730>] register_console+0x2e0/0x350
  [<c12d098e>] uart_add_one_port+0x33e/0x3d0
  [<c10787cb>] ? trace_hardirqs_on+0xb/0x10
  [<c103e10b>] ? try_to_wake_up+0x18b/0x250
  [<c1485ba6>] serial_m3110_probe+0x1c2/0x1df
  [<c12d3d20>] ? serial_m3110_suspend+0x40/0x40
  [<c1303db7>] spi_drv_probe+0x17/0x20
  ...

We fix this by initializing the waitqueue before the main thread is created.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 15:36:42 -07:00
William Douglas
f2934c3c51 mrst_max3110: Change max missing message priority.
Change print message to notice instead of error to clean up
non critcal messages showing on startup. The MAX3111 not being present
is a normal path for end user systems.

Signed-off-by: William Douglas <william.douglas@intel.com>
[rebased on 3.0, switched to dev_dbg()]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 15:36:41 -07:00
Jongpill Lee
40eb0de5ba tty: s5pv210: Add delay loop on fifo reset function for UART
This patch addes delay loop on fifo reset function for UART.
On high speed freq, it needs delay function when fifo reset.
If not, system will hang by this uart reset problem when resuming
from suspend mode.

Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Jaecheol Lee <jc.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 15:36:20 -07:00
Stephen Warren
5568181f18 tty/serial: Fix XSCALE serial ports, e.g. ce4100
Commit 4539c24fe4 "tty/serial: Add
explicit PORT_TEGRA type" introduced separate flags describing the need
for IER bits UUE and RTOIE. Both bits are required for the XSCALE port
type. While that patch updated uart_config[] as required, the auto-probing
code wasn't updated to set the RTOIE flag when an XSCALE port type was
detected. This caused such ports to stop working. This patch rectifies
that.

Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Cc: stable <stable@kernel.org> [3.0]
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 15:35:46 -07:00
Mike Frysinger
7c365bac44 serial: bfin_5xx: fix off-by-one with resource size
This doesn't cause any real bugs, but it should still be fixed.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 15:35:46 -07:00
Manuel Zerpies
5a3c6b251d drivers/tty: use printk_ratelimited() instead of printk_ratelimit()
Since the printk_ratelimit() shouldn't be used anymore (see comment in
include/linux/printk.h), replace it with printk_ratelimited().

Signed-off-by: Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 15:35:45 -07:00
Russ Gorby
6ab8fba7fc tty: n_gsm: Added refcount usage to gsm_mux and gsm_dlci structs
The gsm_mux is created/destroyed when ldisc is
opened/closed but clients of the MUX channel devices (gsmttyN)
may access this structure as long as the TTYs are open.
For the open, the ldisc open is guaranteed to preceed the TTY open,
but the close has no such guaranteed ordering. As a result,
the gsm_mux can be freed in the ldisc close before being accessed
by one of the TTY clients. This can happen if the ldisc is removed
while there are open, active MUX channels.
A similar situation exists for DLCI-0, it is basically a resource
shared by MUX and DLCI  , and should not be freed while they can
be accessed

To avoid this, gsm_mux and dlcis now have a reference counter
ldisc open takes a reference on the mux and all the dlcis
gsmtty_open takes a reference on the mux, dlci0 and its specific
dlci. Dropping the last reference initiates the actual free.

Signed-off-by: Russ Gorby <russ.gorby@intel.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 15:34:50 -07:00
Russ Gorby
bcd5abe28f tty: n_gsm: Add raw-ip support
This patch adds the ability to open a network data connection over a mux
virtual tty channel. This is for modems that support data connections
with raw IP frames instead of PPP. On high speed data connections this
eliminates a significant amount of PPP overhead. To use this interface,
the application must first tell the modem to open a network connection on
a virtual tty. Once that has been accomplished, the app will issue an
IOCTL on that virtual tty to create the network interface. The IOCTL will
return the index of the interface created.

The two IOCTL commands are:

    ioctl( fd, GSMIOC_ENABLE_NET );

    ioctl( fd, GSMIOC_DISABLE_NET );

Signed-off-by: Russ Gorby <russ.gorby@intel.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 15:34:45 -07:00
Russ Gorby
d50f6dcaf2 tty: n_gsm: expose gsmtty device nodes at ldisc open time
The n_gsm driver being an ldisc, does not provide a convenient method
e.g. udev to create the tty device nodes automatically when the ldisc
is opened.

The TTY device nodes are now created via calls to tty_register_device
from the ldisc open.

Signed-off-by: Russ Gorby <russ.gorby@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 15:33:11 -07:00
Tomoya MORINAGA
20ae6d0b30 pch_phub: Fix register miss-setting issue
Register "interrupt delay value" is for GbE which is connected to Bus-m of PCIe.
However currently, the value is set for Bus-n.
As a result, the value is not set correctly.
This patch moves setting the value processing of Bus-n to Bus-m.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 15:33:10 -07:00
Axel Lin
1e4de81653 firmware: gsmi: remove sysfs entries when unload the module
This patch removes sysfs entries in gsmi_exit() and gsmi_init() error path.

Also move the driver successfully loaded message to the end of gsmi_init()
and return proper error if register_efivars() fails.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 15:17:16 -07:00
Harry Wei
48d9854285 Documentation/zh_CN: Fix messy code file email-clients.txt
Signed-off-by: Harry Wei <harryxiyou@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 15:15:56 -07:00
Márton Németh
573c977439 driver core: add more help description for "path to uevent helper"
The kernel configuration UEVENT_HELPER_PATH is a string to
the uevent helper program. Add more description about how
to disable this feature and how to enable it again during
runtime.

Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 15:12:15 -07:00
matt mooney
156faf9080 driver-core: modify FIRMWARE_IN_KERNEL help message
The help message for the configuration variable was inconsistent
with the way "make firmware_install" really works.

Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 15:12:03 -07:00
matt mooney
113647a281 driver-core: Kconfig grammar corrections in firmware configuration
Fix some grammatical errors and reword a few sentences.

Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 15:12:02 -07:00
edwin_rong
e931830bb8 Realtek cr: Add autosuspend function.
The autosuspend function can be disabled by unchecking the Macro
CONFIG_REALTEK_AUTOPM in kernel config file, by default, this macro is
turned on.

Signed-off-by: edwin_rong <edwin_rong@realsil.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 14:53:42 -07:00
edwin_rong
b6507df482 Realtek cr: Remove unused Macros
Remove Macros wait_timeout() and wait_timeout_x().

Signed-off-by: edwin_rong <edwin_rong@realsil.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 14:53:41 -07:00
edwin_rong
151d9fad6e Realtek cr: clean up unnecessary whitespaces.
Signed-off-by: edwin_rong <edwin_rong@realsil.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 14:53:41 -07:00
Viliam Mateicka
5b8261385c USB: s3c2410_udc: fix custom UDC command handling
There is a bug in Samsung's UDC driver, which is completely disabling
the USB device when a custom UDC command is used.
Following patch seems to get the right behavior (e.g. enabling pull-up
instead of disabling then Vcc is applied).

Signed-off-by: Viliam Mateicka <viliam.mateicka@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 14:51:43 -07:00
Tatyana Brokhman
bc8687db89 usb: gadget: Compilation warning fix
A compilation warning was added by the patch
"usb: gadget: use config_ep_by_speed() instead of ep_choose()".
This patch fixed it.

Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 14:45:44 -07:00
Moiz Sonasath
5bf54506b0 USB: OTG: Use work_queue in set_vbus for TWL6030 transciever
With this commit: cccad6d4b1
usb: otg: notifier: switch to atomic notifier

Following dumps are observed on attach/detach for MUSB HOST
mode and on a detach for MUSB Device mode.

BUG: sleeping function called from invalid context at kernel/mutex.c:85
where, the source is:
twl6030_usb_irq
->atomic_notifier_call_chain
 ->musb_otg_notifications
  ->twl6030_set_vbus
   ->twl_i2c_write_u8
    ->mutex_lock

This patch moves the i2c writes in set_vbus function to a
work-queue thereby avoiding I2C writes in atomic context.

Tested HOST and Device mode functionality on OMAP4460

Signed-off-by: Moiz Sonasath <m-sonasath@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 14:45:43 -07:00
Jassi Brar
28f75f4db1 USB: Gadget: Webcam: Return correct result of bind
The config bind was reported success even if usb_add_function
failed. Fix the return value.

Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-01 14:45:42 -07:00