Commit graph

286,663 commits

Author SHA1 Message Date
Shahar Levi
f41ccd71d8 mac80211: Stop BA session event from device
Some devices support BT/WLAN co-existence algorigthms.
In order not to harm the system performance and user experience, the device
requests not to allow any RX BA session and tear down existing RX BA sessions
based on system constraints such as periodic BT activity that needs to limit
WLAN activity (eg.SCO or A2DP).
In such cases, the intention is to limit the duration of the RX PPDU and
therefore prevent the peer device to use A-MPDU aggregation.

Adding ieee80211_stop_rx_ba_session() callback
that can be used by the driver to stop existing BA sessions.

Signed-off-by: Shahar Levi <shahar_levi@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-07 14:41:36 -04:00
Steven Rostedt
bd50cfa891 slob/lockdep: Fix gfp flags passed to lockdep
Doing a ktest.pl randconfig, I stumbled across the following bug
on boot up:

------------[ cut here ]------------
WARNING: at /home/rostedt/work/autotest/nobackup/linux-test.git/kernel/lockdep.c:2649 lockdep_trace_alloc+0xed/0x100()
Hardware name:
Modules linked in:
Pid: 0, comm: swapper Not tainted 3.0.0-rc1-test-00054-g1d68b67 #1
Call Trace:
 [<ffffffff810626ad>] warn_slowpath_common+0xad/0xf0
 [<ffffffff8106270a>] warn_slowpath_null+0x1a/0x20
 [<ffffffff810b537d>] lockdep_trace_alloc+0xed/0x100
 [<ffffffff81182fb0>] __kmalloc_node+0x30/0x2f0
 [<ffffffff81153eda>] pcpu_mem_alloc+0x13a/0x180
 [<ffffffff82be022c>] percpu_init_late+0x48/0xc2
 [<ffffffff82bd630c>] ? mem_init+0xd8/0xe3
 [<ffffffff82bbcc73>] start_kernel+0x1c2/0x449
 [<ffffffff82bbc35c>] x86_64_start_reservations+0x163/0x167
 [<ffffffff82bbc493>] x86_64_start_kernel+0x133/0x142^M
---[ end trace a7919e7f17c0a725 ]---

Then I ran a ktest.pl config_bisect and it came up with this config
as the problem:

  CONFIG_SLOB

Looking at what is different between SLOB and SLAB and SLUB, I found
that the gfp flags are masked against gfp_allowed_mask in
SLAB and SLUB, but not SLOB.

On boot up, interrupts are disabled and lockdep will warn if some flags
are set in gfp and interrupts are disabled. But these flags are masked
off with the gfp_allowed_mask during boot. Because SLOB does not
mask the flags against gfp_allowed_mask it triggers the warn on.

Adding this mask fixes the bug. I also found that kmem_cache_alloc_node()
was missing both the mask and the lockdep check, and that was added too.

Acked-by: Matt Mackall <mpm@selenic.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Nick Piggin <npiggin@kernel.dk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
2011-06-07 21:38:07 +03:00
Luciano Coelho
57a27e1d6a nl80211: fix overflow in ssid_len
When one of the SSID's length passed in a scan or sched_scan request
is larger than 255, there will be an overflow in the u8 that is used
to store the length before checking.  This causes the check to fail
and we overrun the buffer when copying the SSID.

Fix this by checking the nl80211 attribute length before copying it to
the struct.

This is a follow up for the previous commit
208c72f4fe, which didn't fix the problem
entirely.

Reported-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-07 14:19:07 -04:00
Mike McCormack
6633d64978 rtlwifi: Avoid modifying skbs that are resubmitted
In the case we fail to allocate a new skb, the old skb should
be resubmitted unmodified.

Fixes bug introduced in a9e1286975.

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-07 14:19:07 -04:00
Mike McCormack
4fea2e0e59 rtlwifi: Fix logic in rx_interrupt
Should pass along packet if there's no CRC and no hardware error.

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-07 14:19:03 -04:00
John W. Linville
41bfce8ede Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2011-06-07 14:07:11 -04:00
John W. Linville
bb77f63417 Revert "mac80211: stop queues before rate control updation"
This reverts commit 1d38c16ce4.

The mac80211 maintainer raised complaints about abuse of the CSA stop
reason, and about whether this patch actually serves its intended
purpose at all.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-06-07 14:03:08 -04:00
Liam Girdwood
0168bf0d13 ASoC: core - Allow components to probe/remove in sequence.
Some ASoC components depend on other ASoC components to provide clocks and
power resources in order to probe() and vice versa for remove().

Allow components to be ordered so that components can be probed() and removed()
in sequences that conform to their dependencies.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-07 18:38:27 +01:00
Liam Girdwood
552d1ef6b5 ASoC: core - Optimise and refactor pcm_new() to pass only rtd
Currently pcm_new() passes in 3 arguments :- card, pcm and DAI.

Refactor this to only pass in 1 argument (i.e. the rtd) since struct rtd contains
card, pcm and DAI along with other members too that are useful too.

Signed-off-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-07 18:38:27 +01:00
Jiri Slaby
2872628680 TTY: ntty, add one more sanity check
With the previous patch, we fixed another bug where read_buf was freed
while we still was in n_tty_read. We currently check whether read_buf
is NULL at the start of the function. Add one more check after we wake
up from waiting for input.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 10:36:47 -07:00
Jiri Slaby
92f6fa09bd TTY: ldisc, do not close until there are readers
We restored tty_ldisc_wait_idle in 100eeae2c5 (TTY: restore
tty_ldisc_wait_idle). We used it in the ldisc changing path to fix the
case where there are tasks in n_tty_read waiting for data and somebody
tries to change ldisc.

Similar to the case above, there may be also tasks waiting in
n_tty_read while hangup is performed. As 65b770468e (tty-ldisc: turn
ldisc user count into a proper refcount) removed the wait-until-idle
from all paths, hangup path won't wait for them to disappear either
now. So add it back even to the hangup path.

There is a difference, we need uninterruptible sleep as there is
obviously HUP signal pending. So tty_ldisc_wait_idle now sleeps
without possibility to be interrupted. This is what original
tty_ldisc_wait_idle did. After the wait idle reintroduction
(100eeae2c5), we have had interruptible sleeps for the ldisc changing
path. But as there is a 5s timeout anyway, we don't allow it to be
interrupted from now on. It's not worth the added complexity of
deciding what kind of sleep we want.

Before 65b770468e tty_ldisc_release was called also from
tty_ldisc_release. It is called from tty_release, so I don't think we
need to restore that one.

This is nicely reproducible after constifying the timing when
drivers/tty/n_tty.c is patched as follows ("TTY: ntty, add one more
sanity check" patch is needed to actually see it explode):
%% -1548,6 +1549,7 @@ static int n_tty_open(struct tty_struct *tty)

        /* These are ugly. Currently a malloc failure here can panic */
        if (!tty->read_buf) {
+               msleep(100);
                tty->read_buf = kzalloc(N_TTY_BUF_SIZE, GFP_KERNEL);
                if (!tty->read_buf)
                        return -ENOMEM;
%% -1785,6 +1788,7 @@ do_it_again:
                                break;
                        }
                        timeout = schedule_timeout(timeout);
+                       msleep(20);
                        continue;
                }
                __set_current_state(TASK_RUNNING);
===== With a process: =====
    while (1) {
        int fd = open(argv[1], O_RDWR);
        read(fd, buf, sizeof(buf));
        close(fd);
    }
===== and its child: =====
        setsid();
        while (1) {
                int fd = open(tty, O_RDWR|O_NOCTTY);
                ioctl(fd, TIOCSCTTY, 1);
                vhangup();
                close(fd);
                usleep(100 * (10 + random() % 1000));
        }
===== EOF =====

References: https://bugzilla.novell.com/show_bug.cgi?id=693374
References: https://bugzilla.novell.com/show_bug.cgi?id=694509
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable <stable@kernel.org> [32, 33, 34, 39]
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 10:16:54 -07:00
Thomas Abraham
0bf8fa04e8 gpio/exynos4: Fix incorrect mapping of gpio pull-up macro to register setting
The S3C_GPIO_PULL_UP macro value incorrectly maps to a reserved setting of GPIO
pull up/down registers on Exynos4 platform. Fix this incorrect mapping by adding
wrappers to the s3c_gpio_setpull_updown and s3c_gpio_getpull_updown functions.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-07 11:10:01 -06:00
Robert P. J. Day
b6badddccc DOCUMENTATION: Replace create_device() with device_create().
Fix a rather obvious typo.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 10:04:22 -07:00
Robert P. J. Day
5464e9c721 DOCUMENTATION: Update overview.txt in Doc/driver-model.
A few grammatical fixes, clarifications and corrections in just the
overview file for the driver model documentation.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 10:04:21 -07:00
J Freyensee
e556b8131a pti: pti_tty_install documentation mispelling.
This patch tidies up the documentation for pti_tty_install()
function.

Signed-off-by: J Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 10:04:21 -07:00
J Freyensee
1312ba40c0 pti: PTI semantics fix in pti_tty_cleanup.
This patch fixes a semantics issue in the pti_tty_cleanup()
routine.

Signed-off-by: J Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 10:01:20 -07:00
J Freyensee
1dae42bff5 pti: ENXIO error case memory leak PTI fix.
This patch fixes a memory leak that can occur in the error case
ENXIO is returned in the pti_tty_install() routine.

Signed-off-by: J Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 10:01:19 -07:00
J Freyensee
29021bccea pti: double-free security PTI fix
This patch fixes a double-free error that will not always be
seen unless /dev/pti char interface is stressed.

Signed-off-by: J Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 10:01:18 -07:00
Shahar Lev
9d031d94da drivers:misc: ti-st: fix skipping of change remote baud
Before the incrementing of ptr in skip_change_remote_baud,
it points to cur_action, but the increment is done by
the size of nxt_action instead. This could cause ptr
to not point to a bts_action structure, which is
harmful for the increment of ptr done in download_firmware.
Therefore, the skipping is first done for cur_action.

Signed-off-by: Shahar Lev <shahar@wizery.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 10:01:18 -07:00
Andrew Morton
bb2b43fefa drivers/base/platform.c: don't mark platform_device_register_resndata() as __init_or_module
This reverts 737a3bb941 ("Driver core: move platform device
creation helpers to .init.text (if MODULE=n)").  That patch assumed that
platform_device_register_resndata() is only ever called from __init code
but that isn't true in the case ioctl->drm_ioctl->radeon_cp_init().

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=35192

Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reported-by: Anthony Basile <blueness@gentoo.org>
Cc: Greg KH <gregkh@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 10:01:17 -07:00
Steven Rostedt
7316a9f2a9 st_kim: Handle case of no device found for ID 0
Running ktest.pl, I hit this bug:

[   19.780654] BUG: unable to handle kernel NULL pointer dereference at 0000000c
[   19.780660] IP: [<c112efcd>] dev_get_drvdata+0xc/0x46
[   19.780669] *pdpt = 0000000031daf001 *pde = 0000000000000000
[   19.780673] Oops: 0000 [#1] SMP
[   19.780680] Dumping ftrace buffer:^M
[   19.780685]    (ftrace buffer empty)
[   19.780687] Modules linked in: ide_pci_generic firewire_ohci firewire_core evbug crc_itu_t e1000 ide_core i2c_i801 iTCO_wdt
[   19.780697]
[   19.780700] Pid: 346, comm: v4l_id Not tainted 2.6.39-test-02740-gcaebc16-dirty #4                  /DG965MQ
[   19.780706] EIP: 0060:[<c112efcd>] EFLAGS: 00010202 CPU: 0
[   19.780709] EIP is at dev_get_drvdata+0xc/0x46
[   19.780712] EAX: 00000008 EBX: f1e37da4 ECX: 00000000 EDX: 00000000
[   19.780715] ESI: f1c3f200 EDI: c33ec95c EBP: f1e37d80 ESP: f1e37d80
[   19.780718]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[   19.780721] Process v4l_id (pid: 346, ti=f1e36000 task=f2bc2a60 task.ti=f1e36000)
[   19.780723] Stack:
[   19.780725]  f1e37d8c c117d395 c33ec93c f1e37db4 c117a0f9 00000002 00000000 c1725e54
[   19.780732]  00000001 00000007 f2918c90 f1c3f200 c33ec95c f1e37dd4 c1789d3d 22222222
[   19.780740]  22222222 22222222 f2918c90 f1c3f200 f29194f4 f1e37de8 c178d5c4 c1725e54
[   19.780747] Call Trace:
[   19.780752]  [<c117d395>] st_kim_ref+0x28/0x41
[   19.780756]  [<c117a0f9>] st_register+0x29/0x562
[   19.780761]  [<c1725e54>] ? v4l2_open+0x111/0x1e3
[   19.780766]  [<c1789d3d>] fmc_prepare+0x97/0x424
[   19.780770]  [<c178d5c4>] fm_v4l2_fops_open+0x70/0x106
[   19.780773]  [<c1725e54>] ? v4l2_open+0x111/0x1e3
[   19.780777]  [<c1725e9b>] v4l2_open+0x158/0x1e3
[   19.780782]  [<c065173b>] chrdev_open+0x22c/0x276
[   19.780787]  [<c0647c4e>] __dentry_open+0x35c/0x581
[   19.780792]  [<c06498f9>] nameidata_to_filp+0x7c/0x96
[   19.780795]  [<c065150f>] ? cdev_put+0x57/0x57
[   19.780800]  [<c0660cad>] do_last+0x743/0x9d4
[   19.780804]  [<c065d5fc>] ? path_init+0x1ee/0x596
[   19.780808]  [<c0661481>] path_openat+0x10c/0x597
[   19.780813]  [<c05204a1>] ? trace_hardirqs_off+0x27/0x37
[   19.780817]  [<c0509651>] ? local_clock+0x78/0xc7
[   19.780821]  [<c0661945>] do_filp_open+0x39/0xc2
[   19.780827]  [<c1cabc76>] ? _raw_spin_unlock+0x4c/0x5d^M
[   19.780831]  [<c0674ccd>] ? alloc_fd+0x19e/0x1b7
[   19.780836]  [<c06499ca>] do_sys_open+0xb7/0x1bd
[   19.780840]  [<c0608eea>] ? sys_munmap+0x78/0x8d
[   19.780844]  [<c0649b06>] sys_open+0x36/0x58
[   19.780849]  [<c1cb809f>] sysenter_do_call+0x12/0x38
[   19.780852] Code: d8 2f 20 c3 01 83 15 dc 2f 20 c3 00 f0 ff 00 83 05 e0 2f 20 c3 01 83 15 e4 2f 20 c3 00 5d c3 55 89 e5 3e 8d 74 26 00 85 c0 74 28 <8b> 40 04 83 05 e8 2f 20 c3 01 83 15 ec 2f 20 c3 00 85 c0 74 13 ^M
[   19.780889] EIP: [<c112efcd>] dev_get_drvdata+0xc/0x46 SS:ESP 0068:f1e37d80
[   19.780894] CR2: 000000000000000c
[   19.780898] ---[ end trace e7d1d0f6a2d1d390 ]---

The id of 0 passed to st_kim_ref() found no device, keeping pdev null,
and causing pdev->dev cause a NULL pointer dereference. After having
st_kim_ref() check for NULL, the st_unregister() function needed to be
updated to handle the case that st_gdata was not set by the
st_kim_ref().

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 10:01:16 -07:00
Randy Dunlap
5daf538a03 firmware: fix GOOGLE_SMI kconfig dependency warning
Is it meaningful/useful to enable EFI_VARS but not EFI?
That's what GOOGLE_SMI does.  Make it enable EFI also.

Fixes this kconfig dependency warning:

warning: (GOOGLE_SMI) selects EFI_VARS which has unmet direct dependencies (EFI)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Mike Waychison <mikew@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 10:01:16 -07:00
Jiri Slaby
e7328ae184 serial: 8250, increase PASS_LIMIT
With virtual machines like qemu, it's pretty common to see "too much
work for irq4" messages nowadays. This happens when a bunch of output
is printed on the emulated serial console. This is caused by too low
PASS_LIMIT. When ISR loops more than the limit, it spits the message.

I've been using a kernel with doubled the limit and I couldn't see no
problems. Maybe it's time to get rid of the message now?

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:44:36 -07:00
Michael Reed
2807190b69 8250_pci Add EEH support to the 8250 driver for IBM/Digi PCIe 2-port Adapter
The purpose of the patch is to add EEH support to the 8250_PCI driver
for the IBM/Digi PCIE 2port Async EIA-232 Adapter that uses a PLX
chipset on the PPC platforrm.  Basic support for this adapter was
recently added https://lkml.org/lkml/2011/5/11/341

This patch was created against the linux-next kernel

Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Breno Leitao <leitao@linux.vnet.ibm.com>
Cc: Scott Kilau <scottk@digi.com>
Signed-off-by: Michael Reed <mreed@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:42:05 -07:00
Florian Fainelli
ae92c1f5e7 TTY: export NR_LDISC and N_* line discipline numbers to user-space
Since commit (4564f9e5: consolidate line discipline number definitions)
the patch moved all line discipline number from a per-architecture termios.h
to a shared one: tty.h. However, prior to this consolidation work, the
line discipline numbers were outside of an ifdef __KERNEL__/endif block
so these numbers used to be exported to user-space.

Since such numbers are kernel ABI anyway, and tty.h is already included
for user- space header processing, just move these relevant defines
outside of the ifdef __KERNEL__/endif block in include/linux/tty.h.

CC: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
Acked-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:37:01 -07:00
Uwe Kleine-König
0e2adc0684 serial/pch: use global div helper instead of creating a private one
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Alan Cox  <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:36:18 -07:00
Frédéric Brière
b9b24558f7 parport/serial: add support for Timedia/SUNIX cards to parport_serial
Timedia/SUNIX PCI cards with both serial and parallel ports are
currently supported by 8250_pci and parport_pc individually.  Moving
that support into parport_serial allows using both types of ports at the
same time.

This was successfully tested with a SUNIX 4079T.

Signed-off-by: Frédéric Brière <fbriere@fbriere.net>
Acked-by: Alan Cox <alan@linux.intel.com>
Cc: linux-serial@vger.kernel.org
Cc: linux-parport@lists.infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:35:57 -07:00
Frédéric Brière
5bf8f501e0 serial: 8250_pci: add .probe member to struct pci_serial_quirk
This function, if present, is called early on by the 8250_pci probe; it
can be used to reject devices meant for parport_serial.  (The .init
function cannot be used for this purpose, as it is also called by
parport_serial.)

Signed-off-by: Frédéric Brière <fbriere@fbriere.net>
Acked-by: Alan Cox <alan@linux.intel.com>
Cc: linux-serial@vger.kernel.org
Cc: linux-parport@lists.infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:35:56 -07:00
Nicos Gollan
7808edcd30 Basic support for Moschip 9900 family I/O chips
Add I/O based support for serial and parallel ports of the following
chips:

Vendor: Moschip (0x9710)

Parts (device IDs)
* 9900 (0x9900)
* 9904 (0x9904
* 9901 (0x9912, also sold as 9912)
* 9922 (0x9922)

On all chips but the 9900, a single port is provided per PCI subdevice
(subvendor-ID 0xA000, subdevice-IDs 0x1000 for serial, 0x2000 for
parallel with proper class codes). In cascading configurations, the
9900 provides two devices per subdevice, with subvendor-ID 0xA000 and
subdevice-IDs 0x30ps where p is the number of parallel ports and s the
number of serial ports.

Basic testing was only done on the serial part of a 9912 to the point
where it can be used for a serial kernel console, and advanced features
are completely untested. It is possible to reduce functionality of the
chips by adding a configuration EEPROM, and the datasheet [1] is
inconsistent w.r.t subdevices in the 4s+2s1p and 2s1p+4s
configurations. The subdevice-ID 0x3012 should likely read 0x3011 with
a serial port in function 3, which would be consistent with the BAR
layouts. For now, the drivers ignore subdevices with ID 0x1000 and no
class code.

The parallel ports are integrated in parport_serial even for purely
parallel parts to reduce the footprint of the patch.

[1] http://www.moschip.com/data/products/MCS9900/MCS9900_Datasheet.pdf

Signed-off-by: Nicos Gollan <gtdev@spearhead.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:35:21 -07:00
leitao@linux.vnet.ibm.com
cb01ece3ea 8250: Fix capabilities when changing the port type
When changing the port type, the capabilities flags should be changed
also, otherwise the capabilities will not correspond to the port type,
which make set_sleep() crash on rmmod.

This patch just assign the correct capabilites when the port changes.

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
CC: Michael Reed <mreed@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:29:35 -07:00
Alan Cox
1798ca13bf 8250_pci: Fix missing const from merges
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Antony Pavlov <antony@niisi.msk.ru>
Signed-off-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Vasily Averin <vvs@sw.ru>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:25:34 -07:00
Boojin Kim
470f229754 ARM: SAMSUNG: serial: Fix on handling of one clock source for UART
This patch fixes the way of comparison for handling of two or more
clock sources for UART.

For example, if just only one clock source is defined even though
there are two clock sources for UART, the serial driver does not
set proper clock up. Of course, it is problem.

So this patch changes the condition of comparison to avoid useless
setup clock and adds a flag 'NO_NEED_CHECK_CLKSRC' which means
selection of source clock is not required.

In addition, since the Exynos4210 has only one clock source for UART
this patch adds the flag into its common_init_uarts().

Signed-off-by: Boojin Kim <boojin.kim@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:25:34 -07:00
Lennart Sorensen
af99d6f003 serial: ioremap warning fix for jsm driver.
I saw a warning about ioremap from the jsm driver on a system which
looked like this:

resource map sanity check conflict: 0xe0200800 0xe02017ff 0xe0200800 0xe0200fff 0000:01:08.0

Turns out the warning is valid.  The jsm driver has been asking to ioremap
0x1000 forever, but in fact only 8 port chips have 0x1000 bytes of memory.
4 port chips have 0x800 and 2 port chips have 0x400 according to the
data sheet.  It makes more sense to map the size of the region rather
than a hard coded value.  If you happen to have the region legitimately
mapped to a base address that is not 4K aligned, ioremap complains
otherwise.

Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:25:34 -07:00
Kuninori Morimoto
e73a9891b3 usb: renesas_usbhs: add DMAEngine support
USB DMA was installed on "normal DMAC" when SH7724 or older SuperH,
but the "USB-DMAC" was prepared on recent SuperH.
These 2 DMAC have a little bit different behavior.

This patch add DMAEngine code for "normal DMAC",
but it is still using PIO fifo.
The DMA fifo will be formally supported in the future.

You can enable DMA fifo by local fixup
usbhs_fifo_pio_push_handler -> usbhs_fifo_dma_push_handler
usbhs_fifo_pio_pop_handler  -> usbhs_fifo_dma_pop_handler
on usbhsg_ep_enable.

This DMAEngine was tested by g_file_storage on SH7724 Ecovec board

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:10:10 -07:00
Kuninori Morimoto
0cb7e61d16 usb: renesas_usbhs: tidyup pio handler name
This patch tidyup PIO packet handler name.
This is a preparation for DMAEngine support

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:10:10 -07:00
Kuninori Morimoto
0432eed008 usb: renesas_usbhs: tifyup packet start timing
packet transfer timing are controlled in mod_gadget on current renesas_usbhs,
and this style will be imitated on mod_host.
But it need not be managed with host/gadget if it is general transfer.
By this patch, the packet transfer timing is managed in fifo.c

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:10:10 -07:00
Kuninori Morimoto
d77e3f4e17 usb: renesas_usbhs: add pipe/fifo link
renesas_usbhs has CFIFO which is for PIO transfer,
and D0FIFO/D1FIFO which are for DMA transfer.
The pipe selects one of these fifo when it send/recv data.
But fifo must not be selected to different pipe in same time.
This patch add pipe/fifo link for each other,
and fifo is not selected by another pipe until it is unselected.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:10:09 -07:00
Kuninori Morimoto
d3af90a5e4 usb: renesas_usbhs: add usbhsf_fifo
renesas_usbhs has CFIFO/D0FIFO/D1FIFO.
But current renesas_usbhs is using CFIFO (for PIO) only for now.
The fifo selection method is needed for DMAEngine support.
This is a preparation for DMAEngine support

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:10:09 -07:00
Kuninori Morimoto
97664a207b usb: renesas_usbhs: shrink spin lock area
spin lock was very effective while doing 1 packet send/recv on
current renesas_usbhs driver.
But this lock is enough only
 - modify packet/pipe link
 - modify interrpt mask
 - modify fifo access
This patch shrink spin lock area

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:10:09 -07:00
Kuninori Morimoto
8a2c225ddb usb: renesas_usbhs: remove usbhsg_queue_get
usbhsg_queue_get is no longer needed.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:10:08 -07:00
Kuninori Morimoto
dad67397f2 usb: renesas_usbhs: modify data transfer interrupt
On current driver, overall data transfer method was implemented in fifo.c,
but its interrupt which is member of packet queue control
was still in mod_gadget.c.
This patch move it into fifo.c.
By this patch, the packet/fifo control is independent from mod_gadget.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:10:08 -07:00
Kuninori Morimoto
659d495404 usb: renesas_usbhs: modify data transfer method
On current driver, main data transfer function was implemented in fifo.c,
but the overall controlling was implementing in mod_gadget.c.
This style is not useful to support host and DMAEngine in the future.

But the interrupt for data transfer cannot separate easily for now,
because it is deeply related to mod_gadget.

This patch move the overall data transfer method
into fifo.c except interrupt.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:10:08 -07:00
Kuninori Morimoto
6acb95d4e0 usb: renesas_usbhs: modify packet queue control method
Current renesas_usbhs driver is controlling packet queue on mod_gadget.c.
But it has relationship with pipe/fifo, not host/gadget.
So, controlling USB packet queue in pipe.c/fifo.c is
more convenient than in mod_gadget.c.
This patch modify it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:10:08 -07:00
Kuninori Morimoto
4bd0481152 usb: renesas_usbhs: divide data transfer functions
DMAEngine will be supported to this driver in the future.
Then, both PIO and DMA data transfer method should be supported.
But, the transfer function can returns the result immediately
in PIO version, but it can't in DMA version.
This patch divides data transfer functions into top/bottom half
in preparation for DMAEngine support.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:10:07 -07:00
Kuninori Morimoto
e8d548d549 usb: renesas_usbhs: fifo became independent from pipe.
Current renesas_usbhs has PIO data transfer mode which controls CFIFO.
And it was implemented in pipe.c.
But, fifo control method needs more flexible implementation
to support DMAEngine.
This patch create fifo.c, and it became independent from pipe.c.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:10:07 -07:00
Kuninori Morimoto
ad6f2a8bc5 usb: renesas_usbhs: modify pipe direction flags
Current driver had pipe direction flag
which came from usb_endpoint_dir_in().
It means "input direction" for HOST,
and "out direction" for Gadget.
But driver needs "input direction for pipe".
This patch adds IS_DIR_HOST flags and care
both "input direction for HOST" and "input direction for pipe"

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:10:06 -07:00
Niels de Vos
cc55687124 ehci-hcd: remove EOL from MODULE_PARM_DESC for 'hird' option
There is no need to have a "\n" on a MODULE_PARM_DESC, remove it

Signed-off-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:09:10 -07:00
Dan Carpenter
e90ed12cc4 USB: wusbcore: return negative error codes
cbaf_cdid_get() is only used in cbaf_wusb_chid_store().

In the original code cbaf_cdid_get() returns either a negative error
code or a small positive value on error.  I have changed it to
return -ENOENT if there is not enough data available.

In the original code the caller changed the negative error codes to
positive return values.  I've changed it to just return the error
value directly.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:09:10 -07:00
Mark Brown
325fd182ca USB: gadget.h depends on ch9.h so include ch9.h directly
The struct definitions are used.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:09:09 -07:00
Julia Lawall
7febe2be36 drivers/usb/host/ohci-pxa27x.c: add missing clk_put
Add a label before the call to clk_put and jump to that in the error
handling code that occurs after the call to clk_get has succeeded.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
expression e1,e2;
statement S;
@@

e1 = clk_get@p1(...);
... when != e1 = e2
    when != clk_put(e1)
    when any
if (...) { ... when != clk_put(e1)
               when != if (...) { ... clk_put(e1) ... }
* return@p3 ...;
 } else S
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-07 09:07:47 -07:00