As Rn covers single-channel formats with a direct relationship between
channel value and brightness, and Cn can be any colors, there are
currently no fourcc codes to describe single-channel formats with an
inverse relationship between channel value and brightness.
Introduce fourcc codes for a single-channel frame buffer format with
two, four, sixteen, or 256 brightness ("darkness") levels, where there
is an inverse relationship between channel value and brightness.
As the number of bits per pixel may be less than eight, some of these
formats rely on proper block handling for the calculation of bits per
pixel and pitch.
The fill order (the order in which multiple pixels are packed in a byte)
is the same order as used for grayscale (2, 4, and 16 levels) images in
the PNG specification, Version 1.2.
This order is also the recommended and default order (FillOrder = 1) for
bilevel and grayscale (16 levels) images in the TIFF 6.0 Specification,
and is also used for monochrome images in the PBM file format,
monochrome Linux frame buffer logos, and BDF and PSF (Linux kernel) font
files.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/6119f3abeda9baaa88652843960adc032da276b4.1657294931.git.geert@linux-m68k.org
Introduce fourcc codes for single-channel frame buffer formats with two,
four, and sixteen brightness levels, where there is a direct
relationship between channel value and brightness.
As the number of bits per pixel is less than eight, these rely on proper
block handling for the calculation of bits per pixel and pitch.
The fill order (the order in which multiple pixels are packed in a byte)
is the same order as used for grayscale (2, 4, and 16 levels) images in
the PNG specification, Version 1.2.
This order is also the recommended and default order (FillOrder = 1) for
bilevel and grayscale (16 levels) images in the TIFF 6.0 Specification,
and is also used for monochrome images in the PBM file format,
monochrome Linux frame buffer logos, and BDF and PSF (Linux kernel) font
files.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/96561a88e53c59cac72e66642bf4c097aacefd18.1657294931.git.geert@linux-m68k.org
Traditionally, the first channel has been called the "red" channel, but
the fourcc values for single-channel "red" formats can also be used for
other single-channel formats with a direct relationship between channel
value and brightness, like grayscale.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/31d1792f26707a7270347e9916b4103470d2b192.1657294931.git.geert@linux-m68k.org
The AFBC helpers derive the number of bits per pixel from the deprecated
drm_format_info.cpp[] field, which does not take into account block
sizes.
Fix this by using the actual number of bits per pixel instead.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/b1d938d903157627c4ac101df92a1f3bf8ebe83d.1657294931.git.geert@linux-m68k.org
Add support for color-indexed frame buffer formats with two, four, and
sixteen colors to the DRM framebuffer helper functions:
1. Add support for 1, 2, and 4 bits per pixel to the damage helper,
2. For color-indexed modes, the length of the color bitfields must be
set to the color depth, else the logo code may pick a logo with too
many colors. Drop the incorrect DAC width comment, which
originates from the i915 driver.
3. Accept C[124] modes when validating or filling in struct
fb_var_screeninfo, and use the correct number of bits per pixel.
4. Set the visual to FB_VISUAL_PSEUDOCOLOR for all color-indexed
modes.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/db3e80b445df661ff0cd7e698507a8d24a4c867e.1657294931.git.geert@linux-m68k.org
Introduce fourcc codes for color-indexed frame buffer formats with two,
four, and sixteen colors, and provide a mapping from bits per pixel and
depth to fourcc codes.
As the number of bits per pixel is less than eight, these rely on proper
block handling for the calculation of bits per pixel and pitch.
The fill order (the order in which multiple pixels are packed in a byte)
is the same order as used for indexed-color (2, 4, and 16 colors) images
in the PNG specification, Version 1.2.
This order is also the recommended and default order (FillOrder = 1) for
palette-color (16 colors) images in the TIFF 6.0 Specification, and is
also used for 16-color Linux frame buffer logos.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/3d88ca7ad32ff3ff3469c10f0b36c312ea233a33.1657294931.git.geert@linux-m68k.org
If IORING_FILE_INDEX_ALLOC is set asking for an allocated slot, the
helper doesn't check if we actually have a file table or not. The non
alloc path does do that correctly, and returns -ENXIO if we haven't set
one up.
Do the same for the allocated path, avoiding a NULL pointer dereference
when trying to find a free bit.
Fixes: a7c41b4687 ("io_uring: let IORING_OP_FILES_UPDATE support choosing fixed file slots")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When userspace queries the properties of a frame buffer, the number of
bits per pixel is derived from the deprecated drm_format_info.cpp[]
field, which does not take into account block sizes.
Fix this by using the actual number of bits per pixel instead.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/b612780feef200b7f914a674db28ed227e7cdc64.1657294931.git.geert@linux-m68k.org
When allocating a frame buffer, the number of bits per pixel needed is
derived from the deprecated drm_format_info.cpp[] field. While this may
work for formats using less than 8 bits per pixel, it does lead to a
large overallocation.
Reduce memory consumption by using the actual number of bits per pixel
instead.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/eabcf4f298184dabe46823fcf5ceffa1da0ec7ef.1657294931.git.geert@linux-m68k.org
Add a flag to struct drm_format_info to indicate if a format is
color-indexed, similar to the existing .is_yuv flag.
This way generic code and drivers can just check this flag, instead of
checking against a list of fourcc formats.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/90cd390b2b4d481661f966de7b504f1702d80dfd.1657294931.git.geert@linux-m68k.org
All implementations return 0 and the return value of mipi_dsi_drv_remove()
is ignored anyhow.
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708094922.1408248-4-u.kleine-koenig@pengutronix.de
Returning an error code from a mipi_dsi remove callback fails, this is
silently ignored. (mipi_dsi_drv_remove() propagates the return value to
device_remove() which ignores it.) So emit an error code in the driver
remove function and return 0.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708094922.1408248-3-u.kleine-koenig@pengutronix.de
panel_simple_remove() returns zero unconditionally. Make it return no value
instead making more obvious what happens in the callers.
This is a preparation for making platform and mipi-dsi remove callbacks
return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708094922.1408248-2-u.kleine-koenig@pengutronix.de
-----BEGIN PGP SIGNATURE-----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=FDkz
-----END PGP SIGNATURE-----
Merge tag 'fscache-fixes-20220708' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull fscache fixes from David Howells:
- Fix a check in fscache_wait_on_volume_collision() in which the
polarity is reversed. It should complain if a volume is still marked
acquisition-pending after 20s, but instead complains if the mark has
been cleared (ie. the condition has cleared).
Also switch an open-coded test of the ACQUIRE_PENDING volume flag to
use the helper function for consistency.
- Not a fix per se, but neaten the code by using a helper to check for
the DROPPED state.
- Fix cachefiles's support for erofs to only flush requests associated
with a released control file, not all requests.
- Fix a race between one process invalidating an object in the cache
and another process trying to look it up.
* tag 'fscache-fixes-20220708' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
fscache: Fix invalidation/lookup race
cachefiles: narrow the scope of flushed requests when releasing fd
fscache: Introduce fscache_cookie_is_dropped()
fscache: Fix if condition in fscache_wait_on_volume_collision()
- Prevent _CPC from being used if the platform firmware does not
confirm CPPC v2 support via _OSC (Mario Limonciello).
- Allow systems with X86_FEATURE_CPPC set to use _CPC even if CPPC
support cannot be agreed on via _OSC (Mario Limonciello).
-----BEGIN PGP SIGNATURE-----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=yWsx
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix two recent regressions related to CPPC support.
Specifics:
- Prevent _CPC from being used if the platform firmware does not
confirm CPPC v2 support via _OSC (Mario Limonciello)
- Allow systems with X86_FEATURE_CPPC set to use _CPC even if CPPC
support cannot be agreed on via _OSC (Mario Limonciello)"
* tag 'acpi-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: CPPC: Don't require _OSC if X86_FEATURE_CPPC is supported
ACPI: CPPC: Only probe for _CPC if CPPC v2 is acked
- Fix NULL pointer dereference related to printing a diagnostic
message in the exynos-bus devfreq driver (Christian Marangi).
- Fix race condition in the runtime PM framework which in some
cases may cause a supplier device to be suspended when its
consumer is still active (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=iyaY
-----END PGP SIGNATURE-----
Merge tag 'pm-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a NULL pointer dereference in a devfreq driver and a runtime
PM framework issue that may cause a supplier device to be suspended
before its consumer.
Specifics:
- Fix NULL pointer dereference related to printing a diagnostic
message in the exynos-bus devfreq driver (Christian Marangi)
- Fix race condition in the runtime PM framework which in some cases
may cause a supplier device to be suspended when its consumer is
still active (Rafael Wysocki)"
* tag 'pm-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / devfreq: exynos-bus: Fix NULL pointer dereference
PM: runtime: Fix supplier device management during consumer probe
PM: runtime: Redefine pm_runtime_release_supplier()
Including:
- Patch for the Intel VT-d driver to fix device setup failures
when the PASID table is shared
- Fix for Intel VT-d device hot-add failure due to wrong device
notifier order
- Remove the old IOMMU mailing list from the MAINTAINERS file
now that it has been retired
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmLIUbYACgkQK/BELZcB
GuPSYBAAo5HfhNcdBaecojN/bPxvOpZBm00Tta1XQ6KnEKGiD+qgE3EhZZgmeaEq
yrpomHhGzb6Der+eq0mdKSYGTY4RTPFbwTpmZh/VtCm5aLnhjeyjgk5y3fFDlsiU
wZfKr1BrBZvJ+yAgpAdvIKsZEjsNyK+2cwvLz36WlMHqzMtNtqaU0OF3oxF+DC08
CzFOlRSqOiyp2Ct4FP9yEXU8sVwvqnHQbuekn8L+loQB5zm5SgIOVy7ttb4idPEn
Q2Kg6imxRVSA8MXvMR8OleQrnOTZrMZVr5OuMbsFPQ2H9RxX7Bq92AMPSReYGRhi
ep6WOVaAq14PxlL4y4HyEd6RYkiNYyz0hdnoXgezJF3k0hoG6hZLdG/SSK5l7zGY
+hrMmKgnF7uPz1M7YFenoy5p5EudzRBafIRgXrOZNZoXUdwNhh8hqJfjRev4op/y
t8Mt1j6goX9icUonPK5SN8MrDo8EaQj0BgC0d2ihScA3uOhVGSfCzLfhNDkGg5Jy
b936bgBzwv8Q7kBORPMmzK1+sNu28/NJnSmURGeSGGwZnsSOEd/GRjZkf7iGc9u7
RrRpW4dH3RlwcUY/ug6UcGqq7xaQPSS//PIVQ/dmjCjX32Xk95jurt1v/hLf0Cm8
eXSp1Q69kQAiNsu4uvZMfYRsVzh9Z2+UgdpoVXQH20ct94M92vA=
=KPue
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- fix device setup failures in the Intel VT-d driver when the PASID
table is shared
- fix Intel VT-d device hot-add failure due to wrong device notifier
order
- remove the old IOMMU mailing list from the MAINTAINERS file now that
it has been retired
* tag 'iommu-fixes-v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
MAINTAINERS: Remove iommu@lists.linux-foundation.org
iommu/vt-d: Fix RID2PASID setup/teardown failure
iommu/vt-d: Fix PCI bus rescan device hot add
- fix a build error in gpio-vf610
- fix a null-pointer dereference in the GPIO character device code
-----BEGIN PGP SIGNATURE-----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=Fq0O
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a build error in gpio-vf610
- fix a null-pointer dereference in the GPIO character device code
* tag 'gpio-fixes-for-v5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: cdev: fix null pointer dereference in linereq_free()
gpio: vf610: fix compilation error
-----BEGIN PGP SIGNATURE-----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=UQiB
-----END PGP SIGNATURE-----
Merge tag 'block-5.19-2022-07-08' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"NVMe pull request with another id quirk addition, and a tracing fix"
* tag 'block-5.19-2022-07-08' of git://git.kernel.dk/linux-block:
nvme: use struct group for generic command dwords
nvme-pci: phison e16 has bogus namespace ids
-----BEGIN PGP SIGNATURE-----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=w3SQ
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.19-2022-07-08' of git://git.kernel.dk/linux-block
Pull io_uring tweak from Jens Axboe:
"Just a minor tweak to an addition made in this release cycle: padding
a 32-bit value that's in a 64-bit union to avoid any potential
funkiness from that"
* tag 'io_uring-5.19-2022-07-08' of git://git.kernel.dk/linux-block:
io_uring: explicit sqe padding for ioctl commands
fbcon now prevents switching to screen resolutions which are smaller
than the font size, and prevents enabling a font which is bigger than
the current screen resolution. This fixes vmalloc-out-of-bounds accesses
found by KASAN.
Guiling Deng fixed a bug where the centered fbdev logo wasn't displayed
correctly if the screen size matched the logo size.
Hsin-Yi Wang provided a patch to include errno.h to fix build when
CONFIG_OF isn't enabled.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYsfdCgAKCRD3ErUQojoP
XxhvAP9HYH0XcfHGEIQ3YSyFRY4JpyLb0TcTD7mnrYwPgAw+KAD7Bw9EE7WhGZLC
7iuDn30/mdCFqiz3IuTjoRKYuG2ceg8=
=yrqq
-----END PGP SIGNATURE-----
Merge tag 'for-5.19/fbdev-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
- fbcon now prevents switching to screen resolutions which are smaller
than the font size, and prevents enabling a font which is bigger than
the current screen resolution. This fixes vmalloc-out-of-bounds
accesses found by KASAN.
- Guiling Deng fixed a bug where the centered fbdev logo wasn't
displayed correctly if the screen size matched the logo size.
- Hsin-Yi Wang provided a patch to include errno.h to fix build when
CONFIG_OF isn't enabled.
* tag 'for-5.19/fbdev-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbcon: Use fbcon_info_from_console() in fbcon_modechange_possible()
fbmem: Check virtual screen sizes in fb_set_var()
fbcon: Prevent that screen size is smaller than font size
fbcon: Disallow setting font bigger than screen size
video: of_display_timing.h: include errno.h
fbdev: fbmem: Fix logo center image dx issue
Use the devm_platform_ioremap_resource() helper instead of calling
platform_get_resource() and devm_ioremap_resource() separately. Make the
code simpler without functional changes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use bitmap_zalloc()/bitmap_free() instead of hand-writing them.
It is less verbose and it improves the semantic.
While at it, remove a useless bitmap_zero() call. The bitmap is already
zero'ed when allocated.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
host1x_cdma_push_wide() had the assumptions that the last parameter word
was a NOP opcode, and that NOP opcodes could be used in all situations.
Neither are true with the new job opcode sequence, so adjust the
function to not have these assumptions, and instead place an early
RESTART opcode when necessary to jump back to the beginning of the
pushbuffer.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
During the refactoring of channel_submit(), assignment of syncval was
moved but it is also used in channel_submit(). Add this assignment back
to channel_submit() as well.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Fixes `kms_cursor_crc --run-subtest cursor-offscreen`.. when the cursor
moves offscreen the plane becomes non-visible, so we need to skip over
it in crtc atomic test and mixer setup.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes: 25fdd5933e ("drm/msm: Add SDM845 DPU support")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/492819/
Link: https://lore.kernel.org/r/20220707212003.1710163-1-robdclark@gmail.com
Even though the IOVA API never actually needed it, iova.h is still
carrying an include of dma-mapping.h, now solely for the sake of not
breaking tegra-drm. Fix that properly.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The code assumes that Tegra GEM is permanently vmapped, which is not
true for the scattered buffers. After converting Tegra video decoder
driver to V4L API, we're now getting a BUG_ON from dma-buf core on playing
video using libvdpau-tegra on T30+ because tegra_gem_prime_vmap() sets
vaddr to NULL. Older pre-V4L video decoder driver wasn't vmapping dma-bufs.
Fix it by actually vmapping the exported GEMs.
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
drivers/gpu/drm/tegra/vic.c:326:12: error: ‘vic_runtime_suspend’ defined but not used [-Werror=unused-function]
static int vic_runtime_suspend(struct device *dev)
^~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/tegra/vic.c:292:12: error: ‘vic_runtime_resume’ defined but not used [-Werror=unused-function]
static int vic_runtime_resume(struct device *dev)
^~~~~~~~~~~~~~~~~~
Mark it as __maybe_unused.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Conditional registration is a problem for other subsystems which may
unwittingly try to interact with host1x_context_device_bus_type in an
uninitialised state on non-Tegra platforms. A look under /sys/bus on a
typical system already reveals plenty of entries from enabled but
otherwise irrelevant configs, so lets keep things simple and register
our context bus unconditionally too.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add Tegra234 support for VIC. It is backwards compatible with
Tegra194.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
When MLOCK enforcement is enabled, the 0-word write currently done
is rejected by the hardware outside of an MLOCK region. As such,
on these chips, which also have the newer, more convenient RESTART_W
opcode, use that instead to skip over the timed out job.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
With the full-featured opcode sequence using MLOCKs, we need to also
unlock those MLOCKs in the event of a timeout. However, it turns out
that on Tegra186/Tegra194, by default, we don't need to do this;
furthermore, on Tegra234 it is much simpler to do; so only implement
this on Tegra234 for the time being.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
For new (Tegra186+) SoCs, use a new ('full-featured') job opcode
sequence that is compatible with virtualization. In particular,
the Host1x hardware in Tegra234 is more strict regarding the sequence,
requiring ACQUIRE_MLOCK-SETCLASS-SETSTREAMID opcodes to occur in
that sequence without gaps (except for SETPAYLOAD), so let's do it
properly in one go now.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add device data and chip headers for Tegra234.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
On Tegra234, each Host1x VM has 8 interrupt lines. Each syncpoint
can be configured with which interrupt line should be used for
threshold interrupt, allowing for load balancing.
For now, to keep backwards compatibility, just set all syncpoints
to the first interrupt.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Host1x on Tegra234 does not have a software-controllable reset line.
As such, don't bail out if we don't find one in the device tree.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Program virtualization tables specifying which VMs have access to which
Host1x hardware resources. Programming these has become mandatory in
Tegra234.
For now, since the driver does not operate as a Host1x hypervisor, we
basically allow access to everything to everyone.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Refactor 'regs' property loading using devm_platform_ioremap_*
and add loading of the 'common' region found on Tegra234.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Host1x class information and opcodes are unchanged or backwards
compatible across SoCs so let's not duplicate them for each one
but have them in a shared header file.
At the same time, add opcode functions for acquire/release_mlock.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Implement the get_streamid_offset and can_use_memory_ctx callbacks
required for supporting context isolation. Since old firmware on VIC
cannot support context isolation without hacks that we don't want to
implement, check the firmware binary to see if context isolation
should be enabled.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
For engines that support context isolation, allocate a context when
opening a channel, and set up stream ID offset and context fields
when submitting a job.
As of this commit, the stream ID offset and fallback stream ID
are not used when context isolation is disabled. However, with
upcoming patches that enable a full featured job opcode sequence,
these will be necessary.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
NVDEC's TRANSCFG register is at a different offset than VIC.
This becomes a problem now when context isolation is enabled and
the reset value of the register is no longer sufficient.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The DMACTX field determines which context, as specified in the
TRANSCFG register, is used. While during boot it doesn't matter
which is used, later on it matters and this value is reused by
the firmware.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add code to do stream ID switching at the beginning of a job. The
stream ID is switched to the stream ID specified by the context
passed in the job structure.
Before switching the stream ID, an OP_DONE wait is done on the
channel's engine to ensure that there is no residual ongoing
work that might do DMA using the new stream ID.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add code to register context devices from device tree, allocate them
out and manage their refcounts.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
