Reserve NET_SKB_PAD + NET_IP_ALIGN bytes of headroom for received packets
to avoid skb head reallocation when pushing protocol headers into the skb.
Tested-by: Xuegang Lu <xuegang.lu@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260513-airoha-rx-headroom-v1-1-bd87798e422d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ksz_phylink_get_caps() is a bit different from other generic methods.
It has a dev_ops->get_caps() call in the middle of the function, and it
does other stuff before (set some supported_interfaces) and after (set
lpi_interfaces from supported_interfaces).
Whereas the dev_ops->get_caps() methods set mac_capabilities and
(optionally) logically OR the supported_interfaces with that of the PCS.
The idea is that this can be expressed simpler, and avoid a indirect
function call to dev_ops->get_caps(). If we tail-call the common
ksz_phylink_get_caps() from individual phylink_get_caps() methods, we do
reorder the settings, but in an inconsequential way (the transfer from
supported_interfaces to lpi_interfaces still sees a complete list of the
supported_interfaces).
Remove the no longer used get_caps() callbacl the ksz_dev_ops.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260512-clean-ksz-2nd-series-v1-7-c00f6ce037fa@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mirror operations are handled through a common function that redirects
the treatment to ksz_dev_ops callbacks. This layer of indirection isn't
needed since we now have a dsa_switch_ops for each switch family.
Remove this indirection layer for KSZ switches, by connecting the
ksz_dev_ops :: mirror_add() and mirror_del() operations directly to
dsa_switch_ops.
Remove the now unused mirror callbacks from ksz_dev_ops.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260512-clean-ksz-2nd-series-v1-6-c00f6ce037fa@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
FDB and MDB operations are handled through a common function that
redirects the treatment to ksz_dev_ops callbacks. This layer of
indirection isn't needed since we now have a dsa_switch_ops for each kind
of switch.
Remove one indirection layer for KSZ switches, by connecting the
ksz_dev_ops :: fdb_dump(), fdb_add(), fdb_del(), mdb_add() and mdb_del()
operations directly to dsa_switch_ops.
Remove the FDB and MDB operations from ksz_dev_ops.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260512-clean-ksz-2nd-series-v1-5-c00f6ce037fa@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
VLAN operations are handled through a common function that redirects the
treatment to ksz_dev_ops callbacks. This level of indirection isn't
needed since we now have a dsa_switch_ops for each kind of switch.
Remove this useless layer of indirection by connecting directly the VLAN
operations to the relevant dsa_switch_ops.
Adapt their prototypes to match dsa_switch_ops expectations.
Remove the now unused VLAN callbacks from ksz_dev_ops.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260512-clean-ksz-2nd-series-v1-4-c00f6ce037fa@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MTU changing is done through a common function that redirects the
treatment to a specific ksz_dev_ops callback. This layer of indirection
isn't needed since we now have a dsa_switch_ops struct for each switch
family.
Remove this indirection layer in MTU changing for KSZ switches, by
directly connecting the ksz_dev_ops :: change_mtu() implementations to
dsa_switch_ops.
Remove the no longer used change_mtu() callback from ksz_dev_ops
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260512-clean-ksz-2nd-series-v1-3-c00f6ce037fa@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dsa_switch_ops :: set_ageing_time() goes through ksz_set_ageing_time(),
further dispatched through ksz_dev_ops :: set_ageing_time(). Only
ksz9477 and lan937x provide an implementation for this, so remove the
(optional) method from ksz8463_switch_ops, ksz87xx_switch_ops,
ksz88xx_switch_ops. Also, hook up ksz9477 and lan937x dsa_switch_ops
directly to their respective implementations.
Every switch family provides a dsa_switch_ops :: port_fast_age()
implementation, which is dispatched through ksz_dev_ops ::
flush_dyn_mac_table(). Remove the dev_ops indirection and connect the
flush_dyn_mac_table() methods directly to their respective dsa_switch_ops.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260512-clean-ksz-2nd-series-v1-2-c00f6ce037fa@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
At this time the driver is not listing any speeds
it supports. This should be ETHTOOL_LINK_MODE_100baseT1_Full_BIT
for DP83TC811. Add the missing call for phylib to read the abilities.
Fixes: b753a9faaf ("net: phy: DP83TC811: Introduce support for the DP83TC811 phy")
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Sven Schuchmann <schuchmann@schleissheimer.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260512071949.6218-1-schuchmann@schleissheimer.de
[pabeni@redhat.com: dropped revision history]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Increase the RQT uniform spread factor from 2 to 4 so that each channel
gets more indirection table entries and traffic is spread more evenly.
For num_channels > 64 imbalance drops from up to ~50% to up to ~25%.
For 64 or fewer channels the 256 entry minimum already provides at least
4x coverage and the table size is unchanged by this commit.
This satisfies the minimum 4x coverage requirement validated by the
generic RSS selftest commit 9e3d4dae98 ("selftests: drv-net: rss:
validate min RSS table size").
The 4x spread factor is best-effort and the table size is always capped by
the device's log_max_rqt_size capability.
Signed-off-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260511172719.330490-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5e_ethtool_set_channels() rejected channel count changes that
required a different RQT size when the default context indirection
table was user-configured. This restriction was introduced by
commit ee3572409f ("net/mlx5e: RSS, Block changing channels number
when RXFH is configured").
Lift the restriction. Validate the resize upfront with
ethtool_rxfh_indir_can_resize(), then fold or unfold the table
in-place via ethtool_rxfh_indir_resize() inside state_lock, before
mlx5e_safe_switch_params(), so the preactivate callback sees the
correct table content when it programs the HW.
Signed-off-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260511172719.330490-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the channel count changes and the RQT size changes with it, a
problem arise for non-default RSS contexts. The driver-side indirection
table grows actual_table_size without filling the new entries; stale
entries from a prior larger configuration may be re-exposed, causing
mlx5e_calc_indir_rqns() to WARN on an out-of-range index.
Replace mlx5e_rss_params_indir_modify_actual_size() with
mlx5e_rss_ctx_resize(), which fills new entries by replicating
the existing pattern, matching what ethtool_rxfh_ctxs_resize() does
for the same case. And restrict the loop to non-default contexts.
Call ethtool_rxfh_ctxs_can_resize() before acquiring state_lock to
validate that all non-default contexts can be resized, and
ethtool_rxfh_ctxs_resize() after releasing it to fold or unfold their
indirection tables. Both functions acquire rss_lock internally and
cannot be called under state_lock. RTNL, held by all set_channels
callers, serialises context creation and deletion making the pre-lock
check safe.
Guard both ethtool calls on mlx5e_rx_res_rss_cnt() > 1: skip the
validation and resize when no non-default contexts exist. This
naturally covers representors and IPoIB, which share
mlx5e_ethtool_set_channels() but cannot have non-default RSS contexts.
Signed-off-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260511172719.330490-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set rxfh_indir_space to the maximum indirection table size the driver
can support: the next power of two above MLX5E_MAX_NUM_CHANNELS times
MLX5E_UNIFORM_SPREAD_RQT_FACTOR.
Without this, ethtool_rxfh_ctxs_can_resize() returns -EINVAL, blocking
non-default RSS contexts from tracking indirection table size changes
when the channel count changes.
Signed-off-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260511172719.330490-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5e_ethtool_set_channels() and mlx5e_rxfh_hfunc_check() rejected
channel counts that would produce an indirection table larger than 256
entries when the XOR8 hash function was active. This check was
introduced in commit 49e6c93870 ("net/mlx5e: RSS, Block XOR hash
with over 128 channels").
XOR8 yields an 8-bit hash, so in practice only up to 256 entries in the
indirection table can be reached due to limited entropy. However, this
does not provide a strong justification for prohibiting larger
indirection tables. Remove the limitation.
Signed-off-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260511172719.330490-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
free_txsa() is an RCU callback running in softirq context, but calls
crypto_free_aead() which can invoke vunmap() internally on hardware
crypto drivers (e.g. hisi_sec2), triggering a kernel crash.
Use rcu_work to defer the cleanup to a workqueue, for the same reasons
as the analogous fix to free_rxsa() in the previous patch.
Fixes: c09440f7dc ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260511153102.2640368-4-alexjlzheng@tencent.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
crypto_free_aead() can internally invoke vunmap() (e.g. via
dma_free_attrs() in hardware crypto drivers such as hisi_sec2).
vunmap() must not be called from softirq context, but free_rxsa()
is an RCU callback that runs in softirq, leading to a kernel crash:
vunmap+0x4c/0x70
__iommu_dma_free+0xd0/0x138
dma_free_attrs+0xf4/0x100
sec_aead_exit+0x64/0xb8 [hisi_sec2]
crypto_destroy_tfm+0x98/0x110
free_rxsa+0x28/0x50 [macsec]
rcu_do_batch+0x184/0x460
rcu_core+0xf4/0x1f8
handle_softirqs+0x118/0x330
Use rcu_work to defer the cleanup to a workqueue. rcu_work dispatches
the worker asynchronously after the RCU grace period, so no thread
blocks waiting, and concurrent releases of multiple SAs naturally
share the same grace period.
Fixes: c09440f7dc ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260511153102.2640368-3-alexjlzheng@tencent.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce a dedicated ordered workqueue, macsec_wq, which will be used
by subsequent patches to defer SA crypto cleanup (crypto_free_aead and
related teardown) out of softirq context.
Using a dedicated workqueue instead of system_wq allows macsec_exit()
to drain exactly the work items belonging to this module via
destroy_workqueue(), without interfering with unrelated work items on
system_wq or causing unexpected delays elsewhere.
rcu_barrier() in macsec_exit() ensures all in-flight rcu_work callbacks
have enqueued their work items before destroy_workqueue() drains and
destroys the queue, making the two-step teardown correct and complete.
The same sequence is kept in the error path of macsec_init() as a
precaution, to mirror macsec_exit() and stay safe if work ever becomes
queueable before this point in the future.
While at it, rename the error labels in macsec_init() from the
resource-named style (rtnl:, notifier:, wq:) to the err_xxx: style
(err_rtnl:, err_notifier:, err_destroy_wq:) to align with the broader
kernel convention.
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260511153102.2640368-2-alexjlzheng@tencent.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is netdev_lock_ops() before the NETDEV_REGISTER notifier
in register_netdevice(), so use the non-locking functions
in net_failover_slave_register().
failover_slave_register() in failover_existing_slave_register() adds lock
and unlock ops too.
Call Trace:
<TASK>
__schedule+0x30d/0x7a0
schedule+0x27/0x90
schedule_preempt_disabled+0x15/0x30
__mutex_lock.constprop.0+0x538/0x9e0
__mutex_lock_slowpath+0x13/0x20
mutex_lock+0x3b/0x50
dev_set_mtu+0x40/0xe0
net_failover_slave_register+0x24/0x280
failover_slave_register+0x103/0x1b0
failover_event+0x15e/0x210
? dropmon_net_event+0xac/0xe0
notifier_call_chain+0x5e/0xe0
raw_notifier_call_chain+0x16/0x30
call_netdevice_notifiers_info+0x52/0xa0
register_netdevice+0x5f4/0x7c0
register_netdev+0x1e/0x40
_mlx5e_probe+0xe2/0x370 [mlx5_core]
mlx5e_probe+0x59/0x70 [mlx5_core]
? __pfx_mlx5e_probe+0x10/0x10 [mlx5_core]
Fixes: 4c975fd700 ("net: hold instance lock during NETDEV_REGISTER/UP")
Signed-off-by: Faicker Mo <faicker.mo@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
find_skb() is the netconsole-specific entry into the netpoll skb
pool: every other netpoll consumer (bonding, team, vlan, bridge,
macvlan, dsa) builds its own sk_buff and never touches the pool.
With netpoll_send_udp() (its only caller) now living in netconsole,
find_skb() can join it.
Move find_skb() into drivers/net/netconsole.c as a file-static
helper, drop EXPORT_SYMBOL_GPL(find_skb) and remove its prototype
from include/linux/netpoll.h. find_skb() drains TX completions via
netpoll_zap_completion_queue(), which is already exported in the
NETDEV_INTERNAL namespace, so netconsole picks up
MODULE_IMPORT_NS("NETDEV_INTERNAL") to consume it.
The skb pool's lifecycle (np->skb_pool, np->refill_wq, refill_skbs(),
refill_skbs_work_handler(), skb_pool_flush()) stays in netpoll: it
is initialised in __netpoll_setup() and torn down in
__netpoll_cleanup(), both of which remain netpoll's responsibility.
The refill work queued via schedule_work(&np->refill_wq) from the
moved find_skb() runs refill_skbs_work_handler() in netpoll without
any further plumbing.
This is pure code motion: the function body is unchanged and its
sole caller (netpoll_send_udp(), already moved by an earlier patch)
keeps invoking it the same way. Pre-existing concerns about
find_skb() running from NMI/printk context (zap_completion_queue()
re-entry, skb_pool spinlocks, GFP_ATOMIC allocation, fallback skb
sizing vs. MAX_SKB_SIZE, PREEMPT_RT semantics of __kfree_skb()) are
inherited as-is and are not addressed here; they predate this
series and are out of scope. Fixing them is left for follow-up
work.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260512-netconsole_split-v2-9-1191d14ad66d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netpoll_udp_checksum() computes the UDP checksum for netconsole's
packets. Move it into drivers/net/netconsole.c as a file-static
helper; drop its EXPORT_SYMBOL_GPL and remove the prototype from
include/linux/netpoll.h.
This was the last csum_ipv6_magic() consumer in net/core/netpoll.c,
so drop the now-stale <net/ip6_checksum.h> include there. Pull it
into netconsole.c so the moved code keeps building.
It was also the last udp_hdr() consumer in net/core/netpoll.c. The
file no longer needs anything from <net/udp.h> (the UDP socket-layer
helpers); MAX_SKB_SIZE only needs struct udphdr, which is provided
by the lighter <linux/udp.h>. Swap the include accordingly.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260512-netconsole_split-v2-7-1191d14ad66d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
push_udp() builds the UDP header (and triggers the checksum) for
netconsole's UDP packets. Move it into drivers/net/netconsole.c as
a file-static helper; drop its EXPORT_SYMBOL_GPL and remove the
prototype from include/linux/netpoll.h.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260512-netconsole_split-v2-6-1191d14ad66d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
push_eth() builds the Ethernet header for netconsole's UDP packets.
Move it into drivers/net/netconsole.c as a file-static helper; drop
its EXPORT_SYMBOL_GPL and remove the prototype from
include/linux/netpoll.h.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260512-netconsole_split-v2-5-1191d14ad66d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
push_ipv4() builds the IPv4 header for netconsole's UDP packets.
Move it into drivers/net/netconsole.c as a file-static helper; drop
its EXPORT_SYMBOL_GPL and remove the prototype from
include/linux/netpoll.h.
put_unaligned() is no longer used in net/core/netpoll.c, so drop
the now-stale <linux/unaligned.h> include from there. Pull it into
netconsole.c so the moved code keeps building.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260512-netconsole_split-v2-4-1191d14ad66d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
push_ipv6() builds the IPv6 header for netconsole's UDP packets.
Its only caller, netpoll_send_udp(), now lives in netconsole, so
the helper can move there as a file-static function. Drop its
EXPORT_SYMBOL_GPL and remove the prototype from
include/linux/netpoll.h.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260512-netconsole_split-v2-3-1191d14ad66d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move netpoll_send_udp() from net/core/netpoll.c into
drivers/net/netconsole.c as a static helper, drop EXPORT_SYMBOL(),
and remove the prototype from include/linux/netpoll.h.
netconsole was the only in-tree caller of this entry point. Every
other netpoll consumer (bonding, team, vlan, bridge, macvlan, dsa)
already builds its own sk_buff and hands it to netpoll_send_skb(),
so the netpoll send-side interface is now skb-only.
The helpers it depends on (find_skb(), push_ipv6(), push_ipv4(),
push_udp(), push_eth(), netpoll_udp_checksum()) were exposed in
the previous patches and stay in net/core/netpoll.c for now.
Subsequent patches move each of them into netconsole one at a time
and drop the corresponding EXPORT_SYMBOL_GPL.
Pull <linux/ip.h>, <linux/ipv6.h> and <linux/udp.h> into netconsole.c
so the moved code can name the header structures.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260512-netconsole_split-v2-2-1191d14ad66d@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
simple_strtoul() is deprecated as it has no error checking. Replace it
with kstrtouint() which returns an error code on invalid input, and add
appropriate error handling.
Also add a NULL check before parsing flags, since strsep() can set id
to NULL if the input has fewer tokens than expected.
Preserve the original behavior for a trailing colon by checking *id
before parsing flags, so an empty string results in flags = 0 rather
than an error.
Signed-off-by: Sajal Gupta <sajal2005gupta@gmail.com>
Link: https://patch.msgid.link/20260509095518.2640-1-sajal2005gupta@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipvlan_process_multicast() runs from process context, there is no
risk of stack overflow if we call netif_receive_skb() instead
of netif_rx().
This avoids some overhead adding/removing skbs to/from a per-cpu
backlog and raising/processing NET_RX softirqs.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260512042019.3300975-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit prevents tail-drop when a qdisc is present and the ptr_ring
becomes full. Once the ring reaches capacity after a produce attempt,
the netdev queue is stopped instead of dropping subsequent packets.
If no qdisc is present, the previous tail-drop behavior is preserved.
If producing an entry fails anyway due to a race, tun_net_xmit() drops
the packet. Such races are expected because LLTX is enabled and the
transmit path operates without the usual locking.
The __tun_wake_queue() function of the consumer races with the producer
for waking/stopping the netdev queue, which could result in a stalled
queue. Therefore, an smp_mb__after_atomic() is introduced that pairs
with the smp_mb() of the consumer. It follows the principle of store
buffering described in tools/memory-model/Documentation/recipes.txt:
- The producer in tun_net_xmit() first sets __QUEUE_STATE_DRV_XOFF,
followed by an smp_mb__after_atomic() (= smp_mb()), and then reads the
ring with __ptr_ring_check_produce().
- The consumer in __tun_wake_queue() first writes zero to the ring in
__ptr_ring_consume(), followed by an smp_mb(), and then reads the queue
status with netif_tx_queue_stopped().
=> Following the aforementioned principle, it is impossible for the
producer to see a full ring (and therefore not wake the queue on the
re-check) while the consumer simultaneously fails to see a stopped
queue (and therefore also does not wake it).
Benchmarks:
The benchmarks show a slight regression in raw transmission performance
when using two sending threads. Packet loss also occurs only in the
two-thread sending case; no packet loss was observed with a single
sending thread.
Test setup:
AMD Ryzen 5 5600X at 4.3 GHz, 3200 MHz RAM, isolated QEMU threads;
Average over 50 runs @ 100,000,000 packets. SRSO and spectre v2
mitigations disabled.
Note for tap+vhost-net:
XDP drop program active in VM -> ~2.5x faster; slower for tap due to
more syscalls (high utilization of entry_SYSRETQ_unsafe_stack in perf)
+--------------------------+--------------+----------------+----------+
| 1 thread | Stock | Patched with | diff |
| sending | | fq_codel qdisc | |
+------------+-------------+--------------+----------------+----------+
| TAP | Received | 1.132 Mpps | 1.123 Mpps | -0.8% |
| +-------------+--------------+----------------+----------+
| | Lost/s | 3.765 Mpps | 0 pps | |
+------------+-------------+--------------+----------------+----------+
| TAP | Received | 3.857 Mpps | 3.901 Mpps | +1.1% |
| +-------------+--------------+----------------+----------+
| +vhost-net | Lost/s | 0.802 Mpps | 0 pps | |
+------------+-------------+--------------+----------------+----------+
+--------------------------+--------------+----------------+----------+
| 2 threads | Stock | Patched with | diff |
| sending | | fq_codel qdisc | |
+------------+-------------+--------------+----------------+----------+
| TAP | Received | 1.115 Mpps | 1.081 Mpps | -3.0% |
| +-------------+--------------+----------------+----------+
| | Lost/s | 8.490 Mpps | 391 pps | |
+------------+-------------+--------------+----------------+----------+
| TAP | Received | 3.664 Mpps | 3.555 Mpps | -3.0% |
| +-------------+--------------+----------------+----------+
| +vhost-net | Lost/s | 5.330 Mpps | 938 pps | |
+------------+-------------+--------------+----------------+----------+
Co-developed-by: Tim Gebauer <tim.gebauer@tu-dortmund.de>
Signed-off-by: Tim Gebauer <tim.gebauer@tu-dortmund.de>
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260510151529.43895-5-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tun_wake_queue() to tun.c and export it for use by vhost-net. The
function validates that the file belongs to a tun/tap device and that
the tfile exists, dereferences the tun_struct under RCU, and delegates
to __tun_wake_queue().
vhost_net_buf_produce() now calls tun_wake_queue() after a successful
batched consume of the ring to allow the netdev subqueue to be woken up.
The point is to allow the queue to be stopped when it gets full, which
is required for traffic shaping - implemented by the following
"avoid ptr_ring tail-drop when a qdisc is present".
Without the corresponding queue stopping, this patch alone causes no
throughput regression for a tap+vhost-net setup sending to a qemu VM:
3.857 Mpps to 3.891 Mpps.
Details: AMD Ryzen 5 5600X at 4.3 GHz, 3200 MHz RAM, isolated QEMU
threads, XDP drop program active in VM, pktgen sender; Avg over
50 runs @ 100,000,000 packets. SRSO and spectre v2 mitigations disabled.
Co-developed-by: Tim Gebauer <tim.gebauer@tu-dortmund.de>
Signed-off-by: Tim Gebauer <tim.gebauer@tu-dortmund.de>
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260510151529.43895-3-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce tun_ring_consume() that wraps ptr_ring_consume() and calls
__tun_wake_queue(). The latter wakes the stopped netdev subqueue once
half of the ring capacity has been consumed, tracked via the new
cons_cnt field in tun_file. As a safety net, the queue is also woken on
the last consumed entry if it leaves the ring empty. The point is to
allow the queue to be stopped when it gets full, which is required for
traffic shaping - implemented by the following "avoid ptr_ring tail-drop
when a qdisc is present".
Some implementation details:
- tun_ring_recv() replaces ptr_ring_consume() with tun_ring_consume()
to properly wake the queue.
- __tun_detach() locks the tx_ring.consumer_lock to avoid races with
the consumer on the queue_index.
- The ptr_ring_consume() call in tun_queue_purge() is not replaced with
tun_ring_consume(). Instead, within the same tx_ring.consumer_lock
in __tun_detach(), the netdev queue is woken for the ntfile taking
it over, to avoid a possible stall. This does not matter for
tun_detach_all(), as it is called during device teardown and no tfile
takes over any queue.
- Reset cons_cnt in tun_attach() so the half-ring wake threshold is
valid for the new ring size after ptr_ring_resize().
- tun_queue_resize() wakes all queues after resizing with the proper
tx_ring.consumer_lock and resets the cons_cnt to avoid a possible
stale queue.
- The aforementioned upcoming patch explains the pairing of the smp_mb()
of __tun_wake_queue().
Without the corresponding queue stopping, this patch alone causes no
regression for a tap setup sending to a qemu VM: 1.132 Mpps
to 1.134 Mpps.
Details: AMD Ryzen 5 5600X at 4.3 GHz, 3200 MHz RAM, isolated QEMU
threads, pktgen sender; Avg over 50 runs @ 100,000,000 packets;
SRSO and spectre v2 mitigations disabled.
Co-developed-by: Tim Gebauer <tim.gebauer@tu-dortmund.de>
Signed-off-by: Tim Gebauer <tim.gebauer@tu-dortmund.de>
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260510151529.43895-2-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The reset actions of the DEFZA adapters are exceedingly slow, taking up
to 30 seconds to complete by the device spec and typically in the range
of 10 seconds in reality, as required for the device RTOS to boot, still
quite a lot. Therefore a state machine is used that's interrupt driven,
however a safety mechanism is required in case of adapter malfunction,
so that if no state change interrupt has arrived in time, then the
situation is taken care of.
The safety mechanism depends on the origin of the reset. For regular
adapter initialisation at the device probe time a sleep is requested.
However a reset is also required by the device spec when the adapter has
transitioned into the halted state, such as in response to a PC Trace
event in the course of ring fault recovery, possibly a common network
event. In that case no sleep is possible as a device halt is reported
at the hardirq level.
A timer is therefore set up to ensure progress in case no adapter state
change interrupt has arrived in time, but as from commit 168f6b6ffb
("timers: Use del_timer_sync() even on UP") a warning is issued as the
timer is deleted in the hardirq handler upon an expected state change:
defza: v.1.1.4 Oct 6 2018 Maciej W. Rozycki
tc2: DEC FDDIcontroller 700 or 700-C at 0x18000000, irq 4
tc2: resetting the board...
------------[ cut here ]------------
WARNING: kernel/time/timer.c:1611 at __timer_delete_sync+0x104/0x120, CPU#0: swapper/0/0
Modules linked in:
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.0.0-dirty #2 VOLUNTARY
Stack : 9800000002027d08 00000000140120e0 0000000000000000 ffffffff8089d468
0000000000000000 0000000000000000 ffffffff807ed6b8 ffffffff80897458
ffffffff80897400 9800000002027b88 0000000000000000 7070617773203a6d
0000000000000000 9800000002027ba4 0000000000001000 6465746e69617420
0000000000000000 ffffffff807ed6b8 00000000140120e0 0000000000000009
000000000000064b ffffffff800dd14c 0000000000000036 9800000002184000
0000000000000000 0000000000000020 0000000000000000 ffffffff80910000
ffffffff8085c000 9800000002027c70 0000000000000001 ffffffff80045fa0
0000000000000000 0000000000000000 0000000000000000 0000000000000009
000000000000064b ffffffff800502b8 ffffffff807ed6b8 ffffffff80045fa0
...
Call Trace:
[<ffffffff800502b8>] show_stack+0x28/0xf0
[<ffffffff80045fa0>] dump_stack_lvl+0x48/0x7c
[<ffffffff80068c98>] __warn+0xa0/0x128
[<ffffffff8004120c>] warn_slowpath_fmt+0x64/0xa4
[<ffffffff800dd14c>] __timer_delete_sync+0x104/0x120
[<ffffffff804934ac>] fza_interrupt+0xc74/0xeb8
[<ffffffff800c6390>] __handle_irq_event_percpu+0x70/0x228
[<ffffffff800c6560>] handle_irq_event_percpu+0x18/0x78
[<ffffffff800cc320>] handle_percpu_irq+0x50/0x80
[<ffffffff800c5970>] generic_handle_irq+0x90/0xd0
[<ffffffff806e956c>] do_IRQ+0x1c/0x30
[<ffffffff8004ad4c>] handle_int+0x148/0x154
[<ffffffff800ab7c0>] do_idle+0x40/0x108
[<ffffffff800abb0c>] cpu_startup_entry+0x2c/0x38
[<ffffffff806dfec8>] kernel_init+0x0/0x108
---[ end trace 0000000000000000 ]---
tc2: OK
tc2: model 700 (DEFZA-AA), MMF PMD, address 08-00-2b-xx-xx-xx
tc2: ROM rev. 1.0, firmware rev. 1.2, RMC rev. A, SMT ver. 1
tc2: link unavailable
------------[ cut here ]------------
WARNING: kernel/time/timer.c:1611 at __timer_delete_sync+0x104/0x120, CPU#0: swapper/0/0
Modules linked in:
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G W 7.0.0-dirty #2 VOLUNTARY
Tainted: [W]=WARN
Stack : 9800000002027d08 00000000140120e0 0000000000000000 ffffffff8089d468
0000000000000000 0000000000000000 ffffffff807ed6b8 ffffffff80897458
ffffffff80897400 9800000002027b88 0000000000000000 0000000000000000
0000000000000000 9800000002027ba4 0000000000001000 0000000000000000
0000000000000000 ffffffff807ed6b8 00000000140120e0 0000000000000009
000000000000064b ffffffff800dd14c 0000000000000036 9800000002184000
0000000000000000 0000000000000020 0000000000000000 ffffffff80910000
ffffffff8085c000 9800000002027c70 0000000000000001 ffffffff80045fa0
0000000000000000 0000000000000000 0000000000000000 0000000000000009
000000000000064b ffffffff800502b8 ffffffff807ed6b8 ffffffff80045fa0
...
Call Trace:
[<ffffffff800502b8>] show_stack+0x28/0xf0
[<ffffffff80045fa0>] dump_stack_lvl+0x48/0x7c
[<ffffffff80068c98>] __warn+0xa0/0x128
[<ffffffff8004120c>] warn_slowpath_fmt+0x64/0xa4
[<ffffffff800dd14c>] __timer_delete_sync+0x104/0x120
[<ffffffff804934ac>] fza_interrupt+0xc74/0xeb8
[<ffffffff800c6390>] __handle_irq_event_percpu+0x70/0x228
[<ffffffff800c6560>] handle_irq_event_percpu+0x18/0x78
[<ffffffff800cc320>] handle_percpu_irq+0x50/0x80
[<ffffffff800c5970>] generic_handle_irq+0x90/0xd0
[<ffffffff806e956c>] do_IRQ+0x1c/0x30
[<ffffffff8004ad4c>] handle_int+0x148/0x154
[<ffffffff806de8a4>] arch_local_irq_disable+0x4/0x28
[<ffffffff800ab7d0>] do_idle+0x50/0x108
[<ffffffff800abb0c>] cpu_startup_entry+0x2c/0x38
[<ffffffff806dfec8>] kernel_init+0x0/0x108
---[ end trace 0000000000000000 ]---
tc2: registered as fddi0
The immediate origin of the new warning is the switch away from aliasing
del_timer_sync() to del_timer() (timer_delete_sync() to timer_delete()
in terms of current function names) for UP configurations, which however
is the only choice for this driver anyway as no SMP hardware supports
the TURBOchannel bus this device interfaces to. Therefore there is a
very remote issue only this is a sign of.
Specifically if an adapter reset issued upon a transition to the halted
state times out and first triggers fza_reset_timer() for another reset
assertion, which then schedules fza_reset_timer() for reset deassertion
and then that second call is pre-empted after poking at the hardware,
but before the timer has been rearmed and owing to high system load
causing exceedingly high scheduling latency control is not handed back
before a transition to the uninitialised state has caused the timer to
be deleted even before it has been started, then fza_reset_timer() will
be called yet again and issue another reset even though by then the
adapter has already recovered.
Prevent this situation from happening by switching to timer_delete() for
the transition to the halted state and protect the code region affected
with a spinlock, also to make sure add_timer() has not been called twice
in a row due to an execution race between the interrupt handler and the
timer handler (though it could only happen on SMP, but let's keep the
driver clean). It's a very unlikely sequence of events to happen and
therefore there's no point in trying to be overly clever about it, such
as by placing printk() calls outside the protection. For the transition
to the uninitialised state switch to timer_delete_sync_try() instead, so
that a timer isn't deleted that's just been rearmed by the timer handler
and needs to watch for the device to come out of reset again (again, an
SMP scenario only).
Retain timer_delete_sync() invocations outside the hardirq context for a
stray timer not to fire once device structures have been released.
Fixes: 61414f5ec9 ("FDDI: defza: Add support for DEC FDDIcontroller 700 TURBOchannel adapter")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add both fractional-frequency-offset (PPM) and
fractional-frequency-offset-ppt (PPT) attributes to the
pin-parent-device nested attribute set, alongside the existing
top-level pin attributes. Both carry the same measurement at
different precisions.
Introduce enum dpll_ffo_type and struct dpll_ffo_param to
distinguish FFO contexts: DPLL_FFO_PORT_RXTX_RATE for the RX vs
TX symbol rate offset reported at the top level, and
DPLL_FFO_PIN_DEVICE for the pin vs parent DPLL offset reported
in the pin-parent-device nest.
Add a supported_ffo bitmask to struct dpll_pin_ops so drivers
declare which FFO types they support. The core only calls ffo_get
for types the driver has opted into, eliminating the need for
per-driver NULL pointer guards. Validate at pin registration time
that supported_ffo is not set without an ffo_get callback.
Update mlx5 (DPLL_FFO_PORT_RXTX_RATE) and zl3073x
(DPLL_FFO_PORT_RXTX_RATE) drivers to use the new API.
Add documentation for both FFO types to dpll.rst.
Changes v3 -> v4:
- Replace dpll=NULL overloading with enum dpll_ffo_type and
struct dpll_ffo_param (Jakub Kicinski)
- Add supported_ffo opt-in bitmask in dpll_pin_ops for fail-close
driver validation (Jakub Kicinski)
- Add WARN_ON in dpll_pin_register for supported_ffo without
ffo_get callback
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260511155816.99936-2-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When updating the driver to match latest datasheet to suspend access to
URAM when suspending DMA transfers a corner-case was missed, URAM access
will not be suspended if WoL is enabled. This lead to the error message
(correctly) being triggered as URAM access is not suspended even tho
it's requested as part of stopping DMA.
Avoid checking if URAM access is suspended and printing the error
message if WoL is enabled when we suspend the system, as we know it will
not be.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdWnjV%3DHGE1o08zLhUfTgOSene5fYx1J5GG10mB%2BToq8qg@mail.gmail.com/
Fixes: 353d8e7989 ("net: ethernet: ravb: Suspend and resume the transmission flow")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sai Krishna <saikrishnag@marvell.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add chip info entry for the Realtek RTL8367SB switch. This device has
chip ID 0x6367 and version 0x0010. It exposes two external interfaces:
port 6 supports MII, TMII, RMII, RGMII, SGMII and HSGMII, while port 7
supports MII, TMII, RMII and RGMII. Use the existing 8365MB-VC jam table
for initialization.
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://patch.msgid.link/3c6d822b-0e85-4173-86ba-2badb140bbf1@yahoo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
... and PCI device helpers.
The various struct pci_device_id arrays were initialized mostly by one
the PCI_DEVICE macros and then list expressions. The latter isn't easily
readable if you're not into PCI. Using named initializers is more
explicit and thus easier to parse.
Also use PCI_DEVICE* helper macros to assign .vendor, .device,
.subvendor and .subdevice where appropriate and skip explicit
assignments of 0 (which the compiler takes care of).
The secret plan is to make struct pci_device_id::driver_data an
anonymous union (similar to
https://lore.kernel.org/all/cover.1776579304.git.u.kleine-koenig@baylibre.com/)
and that requires named initializers. But it's also a nice cleanup on
its own.
This change doesn't introduce changes to the compiled pci_device_id
arrays. Tested on x86 and arm64.
Reviewed-by: Jijie Shao <shaojijie@huawei.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Forwarded: id:76da4f44d48bdde84580963862bf9616bee5c9e9.1778149923.git.u.kleine-koenig@baylibre.com (v2)
Reviewed-by: Michael Grzeschik <mgr@kernel.org>
Link: https://patch.msgid.link/20260511090023.1634387-6-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With .class_mask being zero the value of .class doesn't matter because
to check if a pci_device_id entry matches a given device the expression
(id->class ^ dev->class) & id->class_mask
is checked for being zero (see pci_match_one_device()). So drop the
useless and irritating assignment for .class to match what (I think) all
other drivers are doing that don't need to match on .class, i.e. set
both members to zero.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Link: https://patch.msgid.link/20260511090023.1634387-5-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Report PCS receive error counts for all supported PEF 7061, 7071, 7072 and
xRX200 PHYs.
Accumulate the vendor-specific PHY_ERRCNT read-clear counter
(SEL=RXERR) in .update_stats() and expose it as both IEEE 802.3
SymbolErrorDuringCarrier and generic rx_errors via
.get_phy_stats().
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://patch.msgid.link/20260509205933.3965832-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The shutdown handler aq_pci_shutdown() unconditionally calls
pci_wake_from_d3(pdev, false), clearing the PCI PME_En bit even when
wake-on-LAN has been configured. While aq_nic_shutdown() correctly
programs the NIC firmware via aq_nic_set_power() to listen for magic
packets, the PCI subsystem will not propagate the resulting PME wake
event from D3, so the system never wakes after poweroff.
WOL from suspend (S3) is unaffected because aq_suspend_common() does
not touch pci_wake_from_d3() and relies on the PM core's wake
configuration via device_may_wakeup().
This affects all atlantic-supported NICs (AQC107/108/111/112/113);
users have reported that WOL works if the atlantic driver is never
loaded, but breaks once it has run its shutdown path.
Pass the configured WOL state to pci_wake_from_d3() instead of a
literal false, so the PCI PME_En bit is preserved when the user has
armed WOL via ethtool.
Fixes: 90869ddfef ("net: aquantia: Implement pci shutdown callback")
Cc: stable@vger.kernel.org
Signed-off-by: Zoran Ilievski <goodboy@rexbytes.com>
Reviewed-by: Sukhdeep Singh <sukhdeeps@marvell.com>
Link: https://patch.msgid.link/20260511064002.1857-1-goodboy@rexbytes.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The legacy ARM board file for MACH_MX31ADS was removed in commit
c93197b004 ("ARM: imx: Remove i.MX31 board files"), but a reference
to it remained in the cs89x0 driver. Drop this unused code.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Fixes: c93197b004 ("ARM: imx: Remove i.MX31 board files")
Link: https://patch.msgid.link/20260509023732.42256-1-enelsonmoore@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The gmac_rx() NAPI poll function assembles packets in an
SKB from a ring buffer.
If the ring buffer gets completely emptied during a poll cycle,
we exit gmac_rx(), but the packet is not yet completely
assembled in the SKB, yet the fragment counter frag_nr is
reset to zero on the next invocation.
Solve this by making the RX fragment counter a part of the
port struct, and carry it over between invocations.
Reset the fragment counter only right after calling
napi_gro_frags(), on error (after calling napi_free_frags())
or if stopping the port.
Reset it in some place where not strictly necessary just to
emphasize what is going on.
This was found by Sashiko during normal patch review.
Fixes: 4d5ae32f5e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Link: https://sashiko.dev/#/patchset/20260505-gemini-ethernet-fix-v2-1-997c31d06079%40kernel.org
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260509-gemini-ethernet-fixes-v1-3-6c5d20ddc35b@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The SKB used to assemble packets from fragments in gmac_rx()
is static local, but the Gemini has two ethernet ports, meaning
there can be races between the ports on a bad day if a device
is using both.
Make the RX SKB a per-port variable and carry it over between
invocations in the port struct instead.
Zero the pointer once we call napi_gro_frags(), on error (after
calling napi_free_frags()) or if the port is stopped.
Zero it in some place where not strictly necessary just to
emphasize what is going on.
This was found by Sashiko during normal patch review.
Fixes: 4d5ae32f5e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Link: https://sashiko.dev/#/patchset/20260505-gemini-ethernet-fix-v2-1-997c31d06079%40kernel.org
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260509-gemini-ethernet-fixes-v1-2-6c5d20ddc35b@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In qed_init_wfq_param(), variable non_requested_count can become zero
when the number of vports with the configured flag set (including the
current vport being configured) equals total num_vports. This happens
when configuring the last unconfigured vport or when re-configuring
an already configured vport.
The function then calculates left_rate_per_vp = total_left_rate /
non_requested_count, which causes division by zero.
Fix this by skipping the division when non_requested_count is zero.
In that case, there is no remaining bandwidth to distribute, so just
record the configuration for the current vport and return success.
Fixes: bcd197c81f ("qed: Add vport WFQ configuration APIs")
Signed-off-by: Evgenii Burenchev <evg28bur@yandex.ru>
Link: https://patch.msgid.link/20260507145520.23106-1-evg28bur@yandex.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Motorcomm PHY driver reads optional firmware properties via
of_property_read_*() from phydev->mdio.dev.of_node. This works for
Device Tree based systems, but causes ACPI platforms to ignore the same
properties when they are supplied through _DSD.
As a result, ACPI-described Motorcomm PHY devices fall back to default
settings instead of applying firmware-provided tuning such as
rx/tx internal delay, drive strength, clock output frequency, and
optional boolean controls like auto-sleep-disabled,
keep-pll-enabled, and tx clock inversion.
Switch these lookups to device_property_read_*() so the driver uses the
generic firmware node interface and can consume the same property names
from either Device Tree or ACPI.
This keeps the existing DT behavior unchanged while allowing ACPI
platforms to honor PHY configuration from firmware.
We have completed testing on Sophgo RISC-V architecture server SD3-10.
This server has a 64-core Thead C920 CPU whose DWMAC is connected to
Motorcomm's PHY YT8531. This server supports UEFI boot and it would like
to use the ACPI table.
Signed-off-by: chunzhi.lin <linchunzhi0@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260507040221.3679454-2-linchunzhi0@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ena_phc_gettimex64() is setting the output parameter regardless
of whether ena_com_phc_get_timestamp() succeeded or failed.
When ena_com_phc_get_timestamp() returns an error, the timestamp
parameter may contain uninitialized stack memory (e.g., when PHC is
disabled or in blocked state) or invalid hardware values. Passing
these to userspace via the PTP ioctl is both a security issue
(information leak) and a correctness bug.
Fix by checking the return code after releasing the lock and only
setting the output timestamp on success.
Fixes: e0ea34158e ("net: ena: Add PHC support in the ENA driver")
Cc: stable@vger.kernel.org
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260507003518.22554-1-akiyano@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove a field that was never used.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260507173443.320465-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a table has a miss table that was created by
'mlx5hws_table_set_default_miss' API function, its miss_tbl
keeps the table that points to it in a list.
If such table is deleted, we need to also remove it from the
miss_tbl list, otherwise the node in miss_tbl list will contain
garbage.
Signed-off-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260507173443.320465-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
