ksz_phylink_get_caps() is a bit different from other generic methods.
It has a dev_ops->get_caps() call in the middle of the function, and it
does other stuff before (set some supported_interfaces) and after (set
lpi_interfaces from supported_interfaces).
Whereas the dev_ops->get_caps() methods set mac_capabilities and
(optionally) logically OR the supported_interfaces with that of the PCS.
The idea is that this can be expressed simpler, and avoid a indirect
function call to dev_ops->get_caps(). If we tail-call the common
ksz_phylink_get_caps() from individual phylink_get_caps() methods, we do
reorder the settings, but in an inconsequential way (the transfer from
supported_interfaces to lpi_interfaces still sees a complete list of the
supported_interfaces).
Remove the no longer used get_caps() callbacl the ksz_dev_ops.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260512-clean-ksz-2nd-series-v1-7-c00f6ce037fa@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mirror operations are handled through a common function that redirects
the treatment to ksz_dev_ops callbacks. This layer of indirection isn't
needed since we now have a dsa_switch_ops for each switch family.
Remove this indirection layer for KSZ switches, by connecting the
ksz_dev_ops :: mirror_add() and mirror_del() operations directly to
dsa_switch_ops.
Remove the now unused mirror callbacks from ksz_dev_ops.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260512-clean-ksz-2nd-series-v1-6-c00f6ce037fa@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
FDB and MDB operations are handled through a common function that
redirects the treatment to ksz_dev_ops callbacks. This layer of
indirection isn't needed since we now have a dsa_switch_ops for each kind
of switch.
Remove one indirection layer for KSZ switches, by connecting the
ksz_dev_ops :: fdb_dump(), fdb_add(), fdb_del(), mdb_add() and mdb_del()
operations directly to dsa_switch_ops.
Remove the FDB and MDB operations from ksz_dev_ops.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260512-clean-ksz-2nd-series-v1-5-c00f6ce037fa@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
VLAN operations are handled through a common function that redirects the
treatment to ksz_dev_ops callbacks. This level of indirection isn't
needed since we now have a dsa_switch_ops for each kind of switch.
Remove this useless layer of indirection by connecting directly the VLAN
operations to the relevant dsa_switch_ops.
Adapt their prototypes to match dsa_switch_ops expectations.
Remove the now unused VLAN callbacks from ksz_dev_ops.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260512-clean-ksz-2nd-series-v1-4-c00f6ce037fa@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MTU changing is done through a common function that redirects the
treatment to a specific ksz_dev_ops callback. This layer of indirection
isn't needed since we now have a dsa_switch_ops struct for each switch
family.
Remove this indirection layer in MTU changing for KSZ switches, by
directly connecting the ksz_dev_ops :: change_mtu() implementations to
dsa_switch_ops.
Remove the no longer used change_mtu() callback from ksz_dev_ops
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260512-clean-ksz-2nd-series-v1-3-c00f6ce037fa@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dsa_switch_ops :: set_ageing_time() goes through ksz_set_ageing_time(),
further dispatched through ksz_dev_ops :: set_ageing_time(). Only
ksz9477 and lan937x provide an implementation for this, so remove the
(optional) method from ksz8463_switch_ops, ksz87xx_switch_ops,
ksz88xx_switch_ops. Also, hook up ksz9477 and lan937x dsa_switch_ops
directly to their respective implementations.
Every switch family provides a dsa_switch_ops :: port_fast_age()
implementation, which is dispatched through ksz_dev_ops ::
flush_dyn_mac_table(). Remove the dev_ops indirection and connect the
flush_dyn_mac_table() methods directly to their respective dsa_switch_ops.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260512-clean-ksz-2nd-series-v1-2-c00f6ce037fa@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add chip info entry for the Realtek RTL8367SB switch. This device has
chip ID 0x6367 and version 0x0010. It exposes two external interfaces:
port 6 supports MII, TMII, RMII, RGMII, SGMII and HSGMII, while port 7
supports MII, TMII, RMII and RGMII. Use the existing 8365MB-VC jam table
for initialization.
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://patch.msgid.link/3c6d822b-0e85-4173-86ba-2badb140bbf1@yahoo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All the KSZ switches use the same ksz_connect_tag_protocol while they
don't support all the KSZ tag protocols. So if, for some reason, a given
switch tries to connect another KSZ tag protocol, it won't fail.
Split the common ksz_connect_tag_protocol() into switch-specific
operations. This way, each switch will only accept to connect the tag
protocol it supports.
Remove the no longer used common operation.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-9-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All the switch families use a common function to implement
.get_tag_protocol(). This function then returns the relevant protocol
depending on the chip ID.
Make the protocol to dsa_switch_ops association a little bit more
obvious by having separate implementations.
Change made by manually checking which chip id has which dsa_switch_ops
assigned to it, then filtering the common ksz_get_tag_protocol() for
just those chip IDs pertaining to it.
As an important benefit, we no longer have that weird-looking
DSA_TAG_PROTO_NONE fallback which was never actually returned.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-8-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that each switch driver has its own dsa_switch_ops (currently a copy
of ksz_switch_ops), we no longer need ksz_switch_ops and can remove it.
Get to the driver-specific dsa_switch_ops through the ksz_chip_data
structure.
Reorder the alloc()/get_match_data() calls such as to have that
pointer available.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-7-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently we have a single dsa_switch_ops for 4 very distinct families
of switches, and many dsa_switch_ops methods are simply a dispatches
through ksz_dev_ops. That creates an avoidable level of indirection.
As a preparation for removing that indirection layer, create a separate
dsa_switch_ops structure wherever we have a ksz_dev_ops. These
structures are not yet used - ksz_switch_ops from ksz_common.c still is.
However, this reduces the noise from subsequent changes.
All new dsa_switch_ops are exact copies of ksz_switch_ops. But we need
to export function prototypes from ksz_common.c so that they are
callable from individual drivers.
Note that "individual drivers" are not actual separate kernel modules.
All of ksz8.c, ksz9477.c and lan937x_main.c are part of the same
ksz_switch.ko. Only the "register interface" drivers are different
modules (ksz9477_i2c.o for I2C, ksz_spi.o for SPI, ksz8863_smi.o for
MDIO). So we don't need to export any symbol.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-6-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to ksz_dev_ops, struct phylink_mac_ops shouldn't be part of
the common code. Instead, the common code should provide callable
functionality.
Invert the paradigm and export the common aspects from ksz_common.c, and
move the chip-specific stuff in individual drivers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-5-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ksz_dev_ops() are specific to each switch family so they should
belong to the individual drivers instead of the common section.
Move the ksz_dev_ops() definitions of the KSZ9477 and the LAN937 to
their individual drivers.
Set static the functions that aren't exported anymore.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-4-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ksz_dev_ops() are specific to each switch family so they should
belong to the individual drivers instead of the common section.
Move the ksz_dev_ops() definitions of the KSZ8xxx to ksz8.c
Set static the functions that aren't exported anymore.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260505-clean-ksz-driver-v1-3-05d70fa42461@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 23e8b470c7 ("net: dsa: mv88e6xxx: Add devlink param for ATU
hash algorithm.") introduced ATU hash algorithm access via devlink, but
did not enable it for the 6320 family. Do it now.
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://patch.msgid.link/20260504153227.1390546-6-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 9e907d739c ("net: dsa: mv88e6xxx: add POT operation") did not
add the .pot_clear() method to the 6321 switch operations structure.
Add them now.
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://patch.msgid.link/20260504153227.1390546-4-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 6320 family supports the ALT_SPEED bit on ports 2, 5 and 6. Allow
this speed by implementing 6320 family specific .port_set_speed_duplex()
method.
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://patch.msgid.link/20260504153227.1390546-3-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .port_max_speed_mode() method is not used anymore since commit
40da0c32c3 ("net: dsa: mv88e6xxx: remove handling for DSA and CPU ports").
Drop it.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260504152653.1389394-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dealing long registers with u64 is good, until you realize there are
longer 96-bit registers.
Refactor reg64 helpers to use u32 arrays instead of u64 values, in
preparation for 96-bit registers. We do not keep the separate u64
version for reg64 to avoid duplicated wrappers, although it looks better
when dealing with reg64 *only*.
Helpers for reg96 should be added when they are actually used to avoid
function unused warnings.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260430114529.3536911-3-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drivers might have error messages to propagate to user space. Propagate
the netlink extack so that they can inform user space in a verbal way of
their limitations.
Make the according transformations to the two users (sja1105 and felix).
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260430114529.3536911-2-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RTL8365MB_DIGITAL_INTERFACE_SELECT_MODE_MASK macro was shifting
the 4-bit mask (0xF) by only (_extint % 2) bits instead of
(_extint % 2) * 4. This caused the mask to overlap with the adjacent
nibble when configuring odd-numbered external interfaces, selecting
the wrong bits entirely.
Align the shift calculation with the existing ...MODE_OFFSET macro.
Fixes: 4af2950c50 ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC")
Signed-off-by: Abdulkader Alrezej <alrazj.abdulkader@gmail.com>
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://patch.msgid.link/400a6387-a444-4576-af6d-26be5410bce3@yahoo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Poll free-running firmware RMON counters every 2 seconds and accumulate
deltas into 64-bit per-port statistics. 32-bit packet counters wrap
in ~220s at 10 Gbps line rate with minimum-size frames; the 2s polling
interval provides a comfortable margin. The .get_stats64 callback
forces a fresh poll so that counters are always up to date when queried.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/fa38548ba05866879e8912721edc91947ce4ff12.1775951347.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MxL862xx firmware exposes per-port RMON counters through the
RMON_PORT_GET command, covering standard IEEE 802.3 MAC statistics
(unicast/multicast/broadcast packet and byte counts, collision
counters, pause frames) as well as hardware-specific counters such
as extended VLAN discard and MTU exceed events.
Add the RMON counter firmware API structures and command definitions.
Implement .get_strings, .get_sset_count, and .get_ethtool_stats for
legacy ethtool -S support. Implement .get_eth_mac_stats,
.get_eth_ctrl_stats, and .get_pause_stats for the standardized
IEEE 802.3 statistics interface.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/480be14d5ed51f3db7b1681b298044dbf8e87494.1775951347.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add VLAN support using both the Extended VLAN (EVLAN) engine and the
VLAN Filter (VF) engine in a hybrid architecture that allows a higher
number of VIDs than either engine could achieve alone.
The VLAN Filter engine handles per-port VID membership checks with
discard-unmatched semantics. The Extended VLAN engine handles PVID
insertion on ingress (via fixed catchall rules) and tag stripping on
egress (2 rules per untagged VID). Tagged-only VIDs need no EVLAN
egress rules at all, so they consume only a VF entry.
Both engines draw from shared 1024-entry hardware pools. The VF pool
is divided equally among user ports for VID membership, while the
EVLAN pool is partitioned into small fixed-size ingress blocks (7
entries of catchall rules per port) and fixed-size egress blocks for
tag stripping.
With 5 user ports this yields up to 204 VIDs per port (limited by VF),
of which up to 98 can be untagged (limited by EVLAN egress budget).
With 9 user ports the numbers are 113 total and 53 untagged.
Wire up .port_vlan_add, .port_vlan_del, and .port_vlan_filtering.
Reprogram all EVLAN rules when the PVID or filtering mode changes.
Detach blocks from the bridge port before freeing them on bridge leave
to satisfy the firmware's internal refcount.
Future optimizations could increase VID capacity by dynamically sizing
the egress EVLAN blocks based on actual per-port untagged VID counts
rather than worst-case pre-allocation, or by sharing EVLAN egress and
VLAN Filter blocks across ports with identical VID sets.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/9be29637675342b109a85fa08f5378800d9f7b78.1775581804.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mxl862xx_bridge_port_set() is currently guarded by the
mxl8622_port->setup_done flag, as the early call to
mxl862xx_bridge_port_set() from mxl862xx_port_stp_state_set() would
otherwise cause a NULL-pointer dereference on unused ports which don't
have dp->cpu_dp despite not being a CPU port.
Using the setup_done flag (which is never set for unused ports),
however, also prevents mxl862xx_bridge_port_set() from configuring
user ports' single-port bridges early, which was unintended.
Fix this by returning early from mxl862xx_bridge_port_set() in case
dsa_port_is_unused().
Fixes: 340bdf9846 ("net: dsa: mxl862xx: implement bridge offloading")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/15962aac29ebe0a6eb77565451acff880c41ef33.1775581804.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DSA links aren't supported by the mxl862xx driver.
Instead of returning early from .port_setup when called for
DSA_PORT_TYPE_DSA ports rather return -EOPNOTSUPP and show an error
message.
The desired side-effect is that the framework will switch the port to
DSA_PORT_TYPE_UNUSED, so we can stop caring about DSA_PORT_TYPE_DSA in
all other places.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/b686f3a22d8a6e7d470e7aa98da811a996a229b9.1775581804.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement joining and leaving bridges as well as add, delete and dump
operations on isolated FDBs, port MDB membership management, and
setting a port's STP state.
The switch supports a maximum of 63 bridges, however, up to 12 may
be used as "single-port bridges" to isolate standalone ports.
Allowing up to 48 bridges to be offloaded seems more than enough on
that hardware, hence that is set as max_num_bridges.
A total of 128 bridge ports are supported in the bridge portmap, and
virtual bridge ports have to be used eg. for link-aggregation, hence
potentially exceeding the number of hardware ports.
The firmware-assigned bridge identifier (FID) for each offloaded bridge
is stored in an array used to map DSA bridge num to firmware bridge ID,
avoiding the need for a driver-private bridge tracking structure.
Bridge member portmaps are rebuilt on join/leave using
dsa_switch_for_each_bridge_member().
As there are now more users of the BRIDGEPORT_CONFIG_SET API and the
state of each port is cached locally, introduce a helper function
mxl862xx_set_bridge_port(struct dsa_switch *ds, int port) which
applies the cached per-port state to hardware. For standalone user
ports (dp->bridge == NULL), it additionally resets the port to
single-port bridge state: CPU-only portmap, learning and flooding
disabled. The CPU port path sets its state explicitly before calling
this helper and is therefore not affected by the reset.
Note that MASK_VLAN_BASED_MAC_LEARNING is intentionally absent from
the firmware write mask. After mxl862xx_reset(), the firmware
initialises all VLAN-based MAC learning fields to 0 (disabled), so
SVL is the active mode by default without having to set it explicitly.
Note that there is no convenient way to control flooding on per-port
level, so the driver is using a 0-rate QoS meter setup as a stopper in
lack of any better option. In order to be perfect the firmware-enforced
minimum bucket size is bypassed by directly writing 0s to the relevant
registers -- without that at least one 64-byte packet could still
pass before the meter would change from 'yellow' into 'red' state.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/dd079180e2098e5f9626fcd149b9bad9a1b5a1b2.1775049897.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Call mxl862xx_host_shutdown() in case dsa_register_switch() returns
an error, so any still pending crc_err_work get canceled.
Fixes: a319d0c8c8 ("net: dsa: mxl862xx: add CRC for MDIO communication")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/3fd163f5bb88de426ca9847549f94b4296170ef0.1774911025.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver header for qca8k includes the legacy GPIO header
<linux/gpio.h> but does not use any symbols from it and actually
wants <linux/gpio/consumer.h> so fix this up.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260327-net-dsa-qca8k-v1-1-94e613a5c369@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SGMII support has been added to ksz9477, we can drop the comment saying
that it'll be added later.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20260324180826.524327-3-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ksz_dev_ops .pcs_create() is called under the assumption that the
switch has a PCS port :
if (ksz_has_sgmii_port(dev) && dev->dev_ops->pcs_create) {
ret = dev->dev_ops->pcs_create(dev);
[...]
}
The KSZ9477 implementation of .pcs_create() does the same check on
ksz_has_sgmii_port(), and protects the entire function with it.
Drop it, saving a level of indentation and increasing readability.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20260324180826.524327-2-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Issue the firmware's RST_DATA command before writing data payloads that
contain many zero words. RST_DATA zeroes both the firmware's internal
buffer and the MMD data registers in a single command, allowing the
driver to skip individual MDIO writes for zero-valued words. This
reduces bus traffic for the common case where API structs have many
unused or default-zero fields.
The optimization is applied when at least 5 zero words are found in the
payload, roughly the break-even point against the cost of the extra
RST_DATA command round-trip.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/d10bd6ad5df062d0da342c3e0d330550b3d2432b.1774185953.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable the firmware's opt-in CRC validation on the MDIO/MMD command
interface to detect bit errors on the bus. The firmware bundles CRC-6
and CRC-16 under a single enable flag, so both are implemented
together.
CRC-6 protects the ctrl and len_ret command registers using a table-
driven 3GPP algorithm. It is applied to every command exchange
including SET_DATA/GET_DATA batch transfers. With CRC enabled, the
firmware encodes its return value as a signed 11-bit integer within
the CRC- protected register fields, replacing the previous 16-bit
interpretation.
CRC-16 protects the data payload using the kernel's crc16() library.
The driver appends a CRC-16 checksum to outgoing data and verifies the
firmware-appended checksum on responses. The checksum is placed at the
exact byte offset where the struct data ends, correctly handling
packed structs with odd sizes by splitting the checksum across word
boundaries. SET_DATA/GET_DATA sub-commands carry only CRC-6.
Upon detection of a CRC error on either side all conduit interfaces
are taken down, triggering all user ports to go down as well. This is
the most feasible option: CRC errors are likely caused either by
broken hardware, or are symptom of overheating. In either case, trying
to resume normal operation isn't reasonable.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/620453b9a150bbe5b7ea4224331cb5dc5e57263b.1774185953.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The KSZ9477 maintains the SGMII port's state for speed, duplex and link
status to be able to fixup the accesses to its internal older version of
the Designware XPCS. However, it does so by embedding a full instance of
struct phy_device, only to use the 'speed', 'link' and 'duplex' fields.
This is also only used for the SGMII port, it's otherwise unused for all
other regular ports.
Replace that with simple int/bool values.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260319181705.1576679-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The write loop in mxl862xx_api_wrap() computes the word count as
(size + 1) / 2, rounding up for odd-sized structs.
On the last iteration of an odd-sized buffer it reads a full __le16
from data[i], accessing one byte past the end of the caller's struct.
KASAN catches this as a stack-out-of-bounds read during probe (e.g.
from mxl862xx_bridge_config_fwd() because of the odd length of
sizeof(struct mxl862xx_bridge_config) == 49).
The read-back loop already handles this case, it writes only a single
byte when (i * 2 + 1) == size. The write loop lacked the same guard.
In practice the over-read is harmless: the extra stack byte is sent to
the firmware which ignores trailing data beyond the command's declared
payload size.
Apply the same odd-size last-byte handling to the write path: when the
final word contains only one valid byte, send *(u8 *)&data[i] instead
of le16_to_cpu(data[i]). This is endian-safe because data is
__le16-encoded and the low byte is always at the lowest address
regardless of host byte order.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/83356ad9c9a4470dd49b6b3d661c2a8dd85cc6a1.1773803190.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Smatch reports:
drivers/net/dsa/bcm_sf2.c:997 bcm_sf2_sw_resume() warn:
'priv->clk' from clk_prepare_enable() not released on lines: 983,990.
The clock enabled by clk_prepare_enable() in bcm_sf2_sw_resume()
is not released if bcm_sf2_sw_rst() or bcm_sf2_cfp_resume() fails.
Add the missing clk_disable_unprepare() calls in the error paths
to properly release the clock resource.
Fixes: e9ec5c3bd2 ("net: dsa: bcm_sf2: request and handle clocks")
Reviewed-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Anas Iqbal <mohd.abd.6602@gmail.com>
Link: https://patch.msgid.link/20260318084212.1287-1-mohd.abd.6602@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds partial Ternary Content Addressable Memory (TCAM) for
the mv88e6390 and mv88e6393 family of switches. TCAM entries allow the
switch to match the first 48 or 96 bytes of a frame and take actions on
matched frames.
This patch introduces a subset of the available TCAM functionality.
Matching on ip addresses/protocol and trapping to the cpu.
Eg. to trap traffic with destination ip 224.0.1.129 to the cpu:
tc qdisc add dev p1 clsact
tc filter add dev p1 ingress protocol ip flower skip_sw \
dst_ip 224.0.1.129 action trap
Signed-off-by: Cedric Jehasse <cedric.jehasse@luminex.be>
Link: https://patch.msgid.link/20260311-net-next-mv88e6xxx-tcam-v8-2-32dd5ba30002@luminex.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The rtl8366rb_led_group_port_mask() function always returns LED port
bit in LED group 0; the switch statement returns the same thing in all
non-default cases.
This means that the driver does not currently support configuring LEDs
in non-zero LED groups.
Fix this.
Fixes: 32d6170054 ("net: dsa: realtek: add LED drivers for rtl8366rb")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260311111237.29002-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
