mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-10-22 19:14:51 +00:00
717 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Miguel Ojeda
|
21e649b0bd |
objtool/rust: add one more noreturn Rust function for Rust 1.89.0
commit |
||
|
Miguel Ojeda
|
403bbbe2fa |
objtool/rust: relax slice condition to cover more noreturn Rust functions
commit |
||
Josh Poimboeuf
|
2585e6cbd9 |
objtool: Fix error handling inconsistencies in check()
[ Upstream commit
|
||
|
Josh Poimboeuf
|
c0c59a1f77 |
objtool: Properly disable uaccess validation
[ Upstream commit
|
||
|
Miguel Ojeda
|
a85d8aed0c |
objtool/rust: add one more noreturn Rust function for Rust 1.87.0
commit |
||
|
Josh Poimboeuf
|
4dc5c03fbd |
objtool: Ignore end-of-section jumps for KCOV/GCOV
commit |
||
|
Josh Poimboeuf
|
fecf44d473 |
objtool: Stop UNRET validation on UD2
[ Upstream commit
|
||
|
Josh Poimboeuf
|
0485bdf88f |
objtool, panic: Disable SMAP in __stack_chk_fail()
[ Upstream commit
|
||
|
Josh Poimboeuf
|
8b4f2b6389 |
objtool: Silence more KCOV warnings
[ Upstream commit
|
||
|
Miguel Ojeda
|
e8980258c0 |
objtool/rust: add one more noreturn Rust function for Rust 1.86.0
commit |
||
|
Josh Poimboeuf
|
1b7685256d |
objtool: Fix INSN_CONTEXT_SWITCH handling in validate_unret()
[ Upstream commit |
||
David Laight
|
22e1e4e11a |
objtool: Fix verbose disassembly if CROSS_COMPILE isn't set
[ Upstream commit |
||
|
Josh Poimboeuf
|
11d479dffd |
objtool: Fix segfault in ignore_unreachable_insn()
[ Upstream commit |
||
|
Josh Poimboeuf
|
b865005970 |
x86/traps: Make exc_double_fault() consistently noreturn
[ Upstream commit |
||
|
Josh Poimboeuf
|
c39bd0df25 |
objtool: Ignore dangling jump table entries
[ Upstream commit
|
||
Ard Biesheuvel
|
a00e900c9b |
objtool: Fix C jump table annotations for Clang
[ Upstream commit |
||
Peter Zijlstra
|
2cfd0e5084 |
objtool: Remove annotate_{,un}reachable()
[ Upstream commit |
||
|
Miguel Ojeda
|
4166ac7653 |
objtool/rust: add one more noreturn Rust function
commit |
||
chenchangcheng
|
2cae02a84b |
objtool: Add bch2_trans_unlocked_error() to bcachefs noreturns
[ Upstream commit |
||
Juergen Gross
|
c6eef36436 |
objtool/x86: allow syscall instruction
commit
|
||
Linus Torvalds
|
3630400697 |
LoongArch changes for v6.12
1, Fix objtool about do_syscall() and Clang; 2, Enable generic CPU vulnerabilites support; 3, Enable ACPI BGRT handling; 4, Rework CPU feature probe from CPUCFG/IOCSR; 5, Add ARCH_HAS_SET_MEMORY support; 6, Add ARCH_HAS_SET_DIRECT_MAP support; 7, Improve hardware page table walker; 8, Simplify _percpu_read() and _percpu_write(); 9, Add advanced extended IRQ model documentions; 10, Some bug fixes and other small changes. -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmbybXsWHGNoZW5odWFj YWlAa2VybmVsLm9yZwAKCRAChivD8uImeomkEAChdhm2LxxBoUX8qn5EoUmSG041 EfJ2uJYulfbjlaCTyMJZBddWDNm2Le2Mq+LtJT5e4S7zPaLAV0FZOw5x6/fnj4GW a6sxjD35hrKXMeV9rNi1jrTG5zTUEMFA3tsQTs9+f/BGdIhQ3dvUrscRXgJgkFex v1W/18vCsSNfg58F3PG+wupKlxA69x0p/sIXtU1lqWN8RZiHFIhtW6FjVFDbiP3c NRdg1/oRI0FeEtnA+S6KJppDbXq1J5ZsEoSNTugAcpeYXBCI52N4j5CholmZ/JRw WwewCPeedS6ZQn8HlYygZlHrJEIevT9tVOoeJJhDj2Zz8LeReLZqai/Rf01hFH1T ZNx9Pwt9E4YQ6iHhYchxgDd7MNjJS8HbLHuZUC0zsA085CwPj1yimflU7r0CI1qA 8vq0hodkpvrseZw3E0JpT9Jip5sO74UK4/Zr5xjzlWy1C4oJajP+FOEcjuzen1Tn w1UIRG5prD6nL4+SoNSY8jkKjjLqLgStaovh8bkgIh8mM5DAzSgYk+6kehTVXxAB 7TPu4FNHzoP9Py3paot1I9q9pMZWS6f7B6EpmmIUF/l1HSwgSys5ivxiTbGWJrkM 6Iq3UkgNVLa8MFDHlHZ9OlQkBID3VrCEHZYvbFrJWkRFNZ/anEPTyCjtr/OehI1G HjSJKIXAr0t/tVZkqg== =JyR/ -----END PGP SIGNATURE----- Merge tag 'loongarch-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Fix objtool about do_syscall() and Clang - Enable generic CPU vulnerabilites support - Enable ACPI BGRT handling - Rework CPU feature probe from CPUCFG/IOCSR - Add ARCH_HAS_SET_MEMORY support - Add ARCH_HAS_SET_DIRECT_MAP support - Improve hardware page table walker - Simplify _percpu_read() and _percpu_write() - Add advanced extended IRQ model documentions - Some bug fixes and other small changes * tag 'loongarch-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: Docs/LoongArch: Add advanced extended IRQ model description LoongArch: Remove posix_types.h include from sigcontext.h LoongArch: Fix memleak in pci_acpi_scan_root() LoongArch: Simplify _percpu_read() and _percpu_write() LoongArch: Improve hardware page table walker LoongArch: Add ARCH_HAS_SET_DIRECT_MAP support LoongArch: Add ARCH_HAS_SET_MEMORY support LoongArch: Rework CPU feature probe from CPUCFG/IOCSR LoongArch: Enable ACPI BGRT handling LoongArch: Enable generic CPU vulnerabilites support LoongArch: Remove STACK_FRAME_NON_STANDARD(do_syscall) LoongArch: Set AS_HAS_THIN_ADD_SUB as y if AS_IS_LLVM LoongArch: Enable objtool for Clang objtool: Handle frame pointer related instructions |
||
Tiezhu Yang
|
da5b2ad1c2 |
objtool: Handle frame pointer related instructions
After commit
|
||
|
Miguel Ojeda
|
56d680dd23 |
objtool/rust: list noreturn Rust functions
Rust functions may be `noreturn` (i.e. diverging) by returning the
"never" type, `!`, e.g.
fn f() -> ! {
loop {}
}
Thus list the known `noreturn` functions to avoid such warnings.
Without this, `objtool` would complain if enabled for Rust, e.g.:
rust/core.o: warning: objtool:
_R...9panic_fmt() falls through to next function _R...18panic_nounwind_fmt()
rust/alloc.o: warning: objtool:
.text: unexpected end of section
In order to do so, we cannot match symbols' names exactly, for two
reasons:
- Rust mangling scheme [1] contains disambiguators [2] which we
cannot predict (e.g. they may vary depending on the compiler version).
One possibility to solve this would be to parse v0 and ignore/zero
those before comparison.
- Some of the diverging functions come from `core`, i.e. the Rust
standard library, which may change with each compiler version
since they are implementation details (e.g. `panic_internals`).
Thus, to workaround both issues, only part of the symbols are matched,
instead of using the `NORETURN` macro in `noreturns.h`.
Ideally, just like for the C side, we should have a better solution. For
instance, the compiler could give us the list via something like:
$ rustc --emit=noreturns ...
[ Kees agrees this should be automated and Peter says:
So it would be fairly simple to make objtool consume a magic section
emitted by the compiler.. I think we've asked the compiler folks
for that at some point even, but I don't have clear recollections.
We will ask upstream Rust about it. And if they agree, then perhaps
we can get Clang/GCC to implement something similar too -- for this
sort of thing we can take advantage of the shorter cycles of `rustc`
as well as their unstable features concept to experiment.
Gary proposed using DWARF (though it would need to be available), and
wrote a proof of concept script using the `object` and `gimli` crates:
https://gist.github.com/nbdd0121/449692570622c2f46a29ad9f47c3379a
- Miguel ]
Link: https://rust-lang.github.io/rfcs/2603-rust-symbol-name-mangling-v0.html [1]
Link: https://doc.rust-lang.org/rustc/symbol-mangling/v0.html#disambiguator [2]
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Tested-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240725183325.122827-6-ojeda@kernel.org
[ Added `len_mismatch_fail` symbol for new `kernel` crate code merged
since then as well as 3 more `core::panicking` symbols that appear
in `RUST_DEBUG_ASSERTIONS=y` builds. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
||
|
Linus Torvalds
|
fbc90c042c |
- 875fa64577da ("mm/hugetlb_vmemmap: fix race with speculative PFN
walkers") is known to cause a performance regression (https://lore.kernel.org/all/3acefad9-96e5-4681-8014-827d6be71c7a@linux.ibm.com/T/#mfa809800a7862fb5bdf834c6f71a3a5113eb83ff). Yu has a fix which I'll send along later via the hotfixes branch. - In the series "mm: Avoid possible overflows in dirty throttling" Jan Kara addresses a couple of issues in the writeback throttling code. These fixes are also targetted at -stable kernels. - Ryusuke Konishi's series "nilfs2: fix potential issues related to reserved inodes" does that. This should actually be in the mm-nonmm-stable tree, along with the many other nilfs2 patches. My bad. - More folio conversions from Kefeng Wang in the series "mm: convert to folio_alloc_mpol()" - Kemeng Shi has sent some cleanups to the writeback code in the series "Add helper functions to remove repeated code and improve readability of cgroup writeback" - Kairui Song has made the swap code a little smaller and a little faster in the series "mm/swap: clean up and optimize swap cache index". - In the series "mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David Hildenbrand has reworked the rather sketchy handling of the use of the zeropage in MAP_SHARED mappings. I don't see any runtime effects here - more a cleanup/understandability/maintainablity thing. - Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling of higher addresses, for aarch64. The (poorly named) series is "Restructure va_high_addr_switch". - The core TLB handling code gets some cleanups and possible slight optimizations in Bang Li's series "Add update_mmu_tlb_range() to simplify code". - Jane Chu has improved the handling of our fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in the series "Enhance soft hwpoison handling and injection". - Jeff Johnson has sent a billion patches everywhere to add MODULE_DESCRIPTION() to everything. Some landed in this pull. - In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang has simplified migration's use of hardware-offload memory copying. - Yosry Ahmed performs more folio API conversions in his series "mm: zswap: trivial folio conversions". - In the series "large folios swap-in: handle refault cases first", Chuanhua Han inches us forward in the handling of large pages in the swap code. This is a cleanup and optimization, working toward the end objective of full support of large folio swapin/out. - In the series "mm,swap: cleanup VMA based swap readahead window calculation", Huang Ying has contributed some cleanups and a possible fixlet to his VMA based swap readahead code. - In the series "add mTHP support for anonymous shmem" Baolin Wang has taught anonymous shmem mappings to use multisize THP. By default this is a no-op - users must opt in vis sysfs controls. Dramatic improvements in pagefault latency are realized. - David Hildenbrand has some cleanups to our remaining use of page_mapcount() in the series "fs/proc: move page_mapcount() to fs/proc/internal.h". - David also has some highmem accounting cleanups in the series "mm/highmem: don't track highmem pages manually". - Build-time fixes and cleanups from John Hubbard in the series "cleanups, fixes, and progress towards avoiding "make headers"". - Cleanups and consolidation of the core pagemap handling from Barry Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers and utilize them". - Lance Yang's series "Reclaim lazyfree THP without splitting" has reduced the latency of the reclaim of pmd-mapped THPs under fairly common circumstances. A 10x speedup is seen in a microbenchmark. It does this by punting to aother CPU but I guess that's a win unless all CPUs are pegged. - hugetlb_cgroup cleanups from Xiu Jianfeng in the series "mm/hugetlb_cgroup: rework on cftypes". - Miaohe Lin's series "Some cleanups for memory-failure" does just that thing. - Is anyone reading this stuff? If so, email me! - Someone other than SeongJae has developed a DAMON feature in Honggyu Kim's series "DAMON based tiered memory management for CXL memory". This adds DAMON features which may be used to help determine the efficiency of our placement of CXL/PCIe attached DRAM. - DAMON user API centralization and simplificatio work in SeongJae Park's series "mm/damon: introduce DAMON parameters online commit function". - In the series "mm: page_type, zsmalloc and page_mapcount_reset()" David Hildenbrand does some maintenance work on zsmalloc - partially modernizing its use of pageframe fields. - Kefeng Wang provides more folio conversions in the series "mm: remove page_maybe_dma_pinned() and page_mkclean()". - More cleanup from David Hildenbrand, this time in the series "mm/memory_hotplug: use PageOffline() instead of PageReserved() for !ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline() pages" and permits the removal of some virtio-mem hacks. - Barry Song's series "mm: clarify folio_add_new_anon_rmap() and __folio_add_anon_rmap()" is a cleanup to the anon folio handling in preparation for mTHP (multisize THP) swapin. - Kefeng Wang's series "mm: improve clear and copy user folio" implements more folio conversions, this time in the area of large folio userspace copying. - The series "Docs/mm/damon/maintaier-profile: document a mailing tool and community meetup series" tells people how to get better involved with other DAMON developers. From SeongJae Park. - A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does that. - David Hildenbrand sends along more cleanups, this time against the migration code. The series is "mm/migrate: move NUMA hinting fault folio isolation + checks under PTL". - Jan Kara has found quite a lot of strangenesses and minor errors in the readahead code. He addresses this in the series "mm: Fix various readahead quirks". - SeongJae Park's series "selftests/damon: test DAMOS tried regions and {min,max}_nr_regions" adds features and addresses errors in DAMON's self testing code. - Gavin Shan has found a userspace-triggerable WARN in the pagecache code. The series "mm/filemap: Limit page cache size to that supported by xarray" addresses this. The series is marked cc:stable. - Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations and cleanup" cleans up and slightly optimizes KSM. - Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of code motion. The series (which also makes the memcg-v1 code Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put under config option" and "mm: memcg: put cgroup v1-specific memcg data under CONFIG_MEMCG_V1" - Dan Schatzberg's series "Add swappiness argument to memory.reclaim" adds an additional feature to this cgroup-v2 control file. - The series "Userspace controls soft-offline pages" from Jiaqi Yan permits userspace to stop the kernel's automatic treatment of excessive correctable memory errors. In order to permit userspace to monitor and handle this situation. - Kefeng Wang's series "mm: migrate: support poison recover from migrate folio" teaches the kernel to appropriately handle migration from poisoned source folios rather than simply panicing. - SeongJae Park's series "Docs/damon: minor fixups and improvements" does those things. - In the series "mm/zsmalloc: change back to per-size_class lock" Chengming Zhou improves zsmalloc's scalability and memory utilization. - Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for pinning memfd folios" makes the GUP code use FOLL_PIN rather than bare refcount increments. So these paes can first be moved aside if they reside in the movable zone or a CMA block. - Andrii Nakryiko has added a binary ioctl()-based API to /proc/pid/maps for much faster reading of vma information. The series is "query VMAs from /proc/<pid>/maps". - In the series "mm: introduce per-order mTHP split counters" Lance Yang improves the kernel's presentation of developer information related to multisize THP splitting. - Michael Ellerman has developed the series "Reimplement huge pages without hugepd on powerpc (8xx, e500, book3s/64)". This permits userspace to use all available huge page sizes. - In the series "revert unconditional slab and page allocator fault injection calls" Vlastimil Babka removes a performance-affecting and not very useful feature from slab fault injection. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZp2C+QAKCRDdBJ7gKXxA joTkAQDvjqOoFStqk4GU3OXMYB7WCU/ZQMFG0iuu1EEwTVDZ4QEA8CnG7seek1R3 xEoo+vw0sWWeLV3qzsxnCA1BJ8cTJA8= =z0Lf -----END PGP SIGNATURE----- Merge tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - In the series "mm: Avoid possible overflows in dirty throttling" Jan Kara addresses a couple of issues in the writeback throttling code. These fixes are also targetted at -stable kernels. - Ryusuke Konishi's series "nilfs2: fix potential issues related to reserved inodes" does that. This should actually be in the mm-nonmm-stable tree, along with the many other nilfs2 patches. My bad. - More folio conversions from Kefeng Wang in the series "mm: convert to folio_alloc_mpol()" - Kemeng Shi has sent some cleanups to the writeback code in the series "Add helper functions to remove repeated code and improve readability of cgroup writeback" - Kairui Song has made the swap code a little smaller and a little faster in the series "mm/swap: clean up and optimize swap cache index". - In the series "mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David Hildenbrand has reworked the rather sketchy handling of the use of the zeropage in MAP_SHARED mappings. I don't see any runtime effects here - more a cleanup/understandability/maintainablity thing. - Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling of higher addresses, for aarch64. The (poorly named) series is "Restructure va_high_addr_switch". - The core TLB handling code gets some cleanups and possible slight optimizations in Bang Li's series "Add update_mmu_tlb_range() to simplify code". - Jane Chu has improved the handling of our fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in the series "Enhance soft hwpoison handling and injection". - Jeff Johnson has sent a billion patches everywhere to add MODULE_DESCRIPTION() to everything. Some landed in this pull. - In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang has simplified migration's use of hardware-offload memory copying. - Yosry Ahmed performs more folio API conversions in his series "mm: zswap: trivial folio conversions". - In the series "large folios swap-in: handle refault cases first", Chuanhua Han inches us forward in the handling of large pages in the swap code. This is a cleanup and optimization, working toward the end objective of full support of large folio swapin/out. - In the series "mm,swap: cleanup VMA based swap readahead window calculation", Huang Ying has contributed some cleanups and a possible fixlet to his VMA based swap readahead code. - In the series "add mTHP support for anonymous shmem" Baolin Wang has taught anonymous shmem mappings to use multisize THP. By default this is a no-op - users must opt in vis sysfs controls. Dramatic improvements in pagefault latency are realized. - David Hildenbrand has some cleanups to our remaining use of page_mapcount() in the series "fs/proc: move page_mapcount() to fs/proc/internal.h". - David also has some highmem accounting cleanups in the series "mm/highmem: don't track highmem pages manually". - Build-time fixes and cleanups from John Hubbard in the series "cleanups, fixes, and progress towards avoiding "make headers"". - Cleanups and consolidation of the core pagemap handling from Barry Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers and utilize them". - Lance Yang's series "Reclaim lazyfree THP without splitting" has reduced the latency of the reclaim of pmd-mapped THPs under fairly common circumstances. A 10x speedup is seen in a microbenchmark. It does this by punting to aother CPU but I guess that's a win unless all CPUs are pegged. - hugetlb_cgroup cleanups from Xiu Jianfeng in the series "mm/hugetlb_cgroup: rework on cftypes". - Miaohe Lin's series "Some cleanups for memory-failure" does just that thing. - Someone other than SeongJae has developed a DAMON feature in Honggyu Kim's series "DAMON based tiered memory management for CXL memory". This adds DAMON features which may be used to help determine the efficiency of our placement of CXL/PCIe attached DRAM. - DAMON user API centralization and simplificatio work in SeongJae Park's series "mm/damon: introduce DAMON parameters online commit function". - In the series "mm: page_type, zsmalloc and page_mapcount_reset()" David Hildenbrand does some maintenance work on zsmalloc - partially modernizing its use of pageframe fields. - Kefeng Wang provides more folio conversions in the series "mm: remove page_maybe_dma_pinned() and page_mkclean()". - More cleanup from David Hildenbrand, this time in the series "mm/memory_hotplug: use PageOffline() instead of PageReserved() for !ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline() pages" and permits the removal of some virtio-mem hacks. - Barry Song's series "mm: clarify folio_add_new_anon_rmap() and __folio_add_anon_rmap()" is a cleanup to the anon folio handling in preparation for mTHP (multisize THP) swapin. - Kefeng Wang's series "mm: improve clear and copy user folio" implements more folio conversions, this time in the area of large folio userspace copying. - The series "Docs/mm/damon/maintaier-profile: document a mailing tool and community meetup series" tells people how to get better involved with other DAMON developers. From SeongJae Park. - A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does that. - David Hildenbrand sends along more cleanups, this time against the migration code. The series is "mm/migrate: move NUMA hinting fault folio isolation + checks under PTL". - Jan Kara has found quite a lot of strangenesses and minor errors in the readahead code. He addresses this in the series "mm: Fix various readahead quirks". - SeongJae Park's series "selftests/damon: test DAMOS tried regions and {min,max}_nr_regions" adds features and addresses errors in DAMON's self testing code. - Gavin Shan has found a userspace-triggerable WARN in the pagecache code. The series "mm/filemap: Limit page cache size to that supported by xarray" addresses this. The series is marked cc:stable. - Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations and cleanup" cleans up and slightly optimizes KSM. - Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of code motion. The series (which also makes the memcg-v1 code Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put under config option" and "mm: memcg: put cgroup v1-specific memcg data under CONFIG_MEMCG_V1" - Dan Schatzberg's series "Add swappiness argument to memory.reclaim" adds an additional feature to this cgroup-v2 control file. - The series "Userspace controls soft-offline pages" from Jiaqi Yan permits userspace to stop the kernel's automatic treatment of excessive correctable memory errors. In order to permit userspace to monitor and handle this situation. - Kefeng Wang's series "mm: migrate: support poison recover from migrate folio" teaches the kernel to appropriately handle migration from poisoned source folios rather than simply panicing. - SeongJae Park's series "Docs/damon: minor fixups and improvements" does those things. - In the series "mm/zsmalloc: change back to per-size_class lock" Chengming Zhou improves zsmalloc's scalability and memory utilization. - Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for pinning memfd folios" makes the GUP code use FOLL_PIN rather than bare refcount increments. So these paes can first be moved aside if they reside in the movable zone or a CMA block. - Andrii Nakryiko has added a binary ioctl()-based API to /proc/pid/maps for much faster reading of vma information. The series is "query VMAs from /proc/<pid>/maps". - In the series "mm: introduce per-order mTHP split counters" Lance Yang improves the kernel's presentation of developer information related to multisize THP splitting. - Michael Ellerman has developed the series "Reimplement huge pages without hugepd on powerpc (8xx, e500, book3s/64)". This permits userspace to use all available huge page sizes. - In the series "revert unconditional slab and page allocator fault injection calls" Vlastimil Babka removes a performance-affecting and not very useful feature from slab fault injection. * tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits) mm/mglru: fix ineffective protection calculation mm/zswap: fix a white space issue mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio mm/hugetlb: fix possible recursive locking detected warning mm/gup: clear the LRU flag of a page before adding to LRU batch mm/numa_balancing: teach mpol_to_str about the balancing mode mm: memcg1: convert charge move flags to unsigned long long alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting lib: reuse page_ext_data() to obtain codetag_ref lib: add missing newline character in the warning message mm/mglru: fix overshooting shrinker memory mm/mglru: fix div-by-zero in vmpressure_calc_level() mm/kmemleak: replace strncpy() with strscpy() mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB mm: ignore data-race in __swap_writepage hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr mm: shmem: rename mTHP shmem counters mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async() mm/migrate: putback split folios when numa hint migration fails ... |
||
|
Linus Torvalds
|
0c182ac2eb |
Objtool changes for v6.11:
- Fix bug that caused objtool to confuse certain memory ops
added by KASAN instrumentation as stack accesses
- Various faddr2line optimizations
- Improve error messages
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=RwK9
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Fix bug that caused objtool to confuse certain memory ops added by
KASAN instrumentation as stack accesses
- Various faddr2line optimizations
- Improve error messages
* tag 'objtool-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool/x86: objtool can confuse memory and stack access
objtool: Use "action" in error message to be consistent with help
scripts/faddr2line: Check only two symbols when calculating symbol size
scripts/faddr2line: Remove call to addr2line from find_dir_prefix()
scripts/faddr2line: Invoke addr2line as a single long-running process
scripts/faddr2line: Pass --addresses argument to addr2line
scripts/faddr2line: Check vmlinux only once
scripts/faddr2line: Combine three readelf calls into one
scripts/faddr2line: Reduce number of readelf calls to three
|
||
|
Linus Torvalds
|
2439a5eaa7 |
- Add a spectre_bhi=vmexit mitigation option aimed at cloud
environments
- Remove duplicated Spectre cmdline option documentation
- Add separate macro definitions for syscall handlers which do not
return in order to address objtool warnings
-----BEGIN PGP SIGNATURE-----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=AP9P
-----END PGP SIGNATURE-----
Merge tag 'x86_bugs_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu mitigation updates from Borislav Petkov:
- Add a spectre_bhi=vmexit mitigation option aimed at cloud
environments
- Remove duplicated Spectre cmdline option documentation
- Add separate macro definitions for syscall handlers which do not
return in order to address objtool warnings
* tag 'x86_bugs_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Add 'spectre_bhi=vmexit' cmdline option
x86/bugs: Remove duplicate Spectre cmdline option descriptions
x86/syscall: Mark exit[_group] syscall handlers __noreturn
|
||
Ilya Leoshkevich
|
ec3e837d8f |
kmsan: allow disabling KMSAN checks for the current task
Like for KASAN, it's useful to temporarily disable KMSAN checks around, e.g., redzone accesses. Introduce kmsan_disable_current() and kmsan_enable_current(), which are similar to their KASAN counterparts. Make them reentrant in order to handle memory allocations in interrupt context. Repurpose the allow_reporting field for this. Link: https://lkml.kernel.org/r/20240621113706.315500-12-iii@linux.ibm.com Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <kasan-dev@googlegroups.com> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Alexandre Chartre
|
8e366d83ed |
objtool/x86: objtool can confuse memory and stack access
The encoding of an x86 instruction can include a ModR/M and a SIB (Scale-Index-Base) byte to describe the addressing mode of the instruction. objtool processes all addressing mode with a SIB base of 5 as having %rbp as the base register. However, a SIB base of 5 means that the effective address has either no base (if ModR/M mod is zero) or %rbp as the base (if ModR/M mod is 1 or 2). This can cause objtool to confuse an absolute address access with a stack operation. For example, objtool will see the following instruction: 4c 8b 24 25 e0 ff ff mov 0xffffffffffffffe0,%r12 as a stack operation (i.e. similar to: mov -0x20(%rbp), %r12). [Note that this kind of weird absolute address access is added by the compiler when using KASAN.] If this perceived stack operation happens to reference the location where %r12 was pushed on the stack then the objtool validation will think that %r12 is being restored and this can cause a stack state mismatch. This kind behavior was seen on xfs code, after a minor change (convert kmem_alloc() to kmalloc()): >> fs/xfs/xfs.o: warning: objtool: xfs_da_grow_inode_int+0x6c1: stack state mismatch: reg1[12]=-2-48 reg2[12]=-1+0 Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202402220435.MGN0EV6l-lkp@intel.com/ Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com> Link: https://lore.kernel.org/r/20240620144747.2524805-1-alexandre.chartre@oracle.com Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> |
||
Siddh Raman Pant
|
b13e9f6da4 |
objtool: Use "action" in error message to be consistent with help
The help message mentions the main options as "actions", which is different from the optional "options". But the check error messages outputs "option" or "command" for referring to actions. Make the error messages consistent with help. Signed-off-by: Siddh Raman Pant <siddh.raman.pant@oracle.com> Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> |
||
Borislav Petkov (AMD)
|
0d3db1f14a |
x86/alternatives, kvm: Fix a couple of CALLs without a frame pointer
objtool complains: arch/x86/kvm/kvm.o: warning: objtool: .altinstr_replacement+0xc5: call without frame pointer save/setup vmlinux.o: warning: objtool: .altinstr_replacement+0x2eb: call without frame pointer save/setup Make sure %rSP is an output operand to the respective asm() statements. The test_cc() hunk and ALT_OUTPUT_SP() courtesy of peterz. Also from him add some helpful debugging info to the documentation. Now on to the explanations: tl;dr: The alternatives macros are pretty fragile. If I do ALT_OUTPUT_SP(output) in order to be able to package in a %rsp reference for objtool so that a stack frame gets properly generated, the inline asm input operand with positional argument 0 in clear_page(): "0" (page) gets "renumbered" due to the added : "+r" (current_stack_pointer), "=D" (page) and then gcc says: ./arch/x86/include/asm/page_64.h:53:9: error: inconsistent operand constraints in an ‘asm’ The fix is to use an explicit "D" constraint which points to a singleton register class (gcc terminology) which ends up doing what is expected here: the page pointer - input and output - should be in the same %rdi register. Other register classes have more than one register in them - example: "r" and "=r" or "A": ‘A’ The ‘a’ and ‘d’ registers. This class is used for instructions that return double word results in the ‘ax:dx’ register pair. Single word values will be allocated either in ‘ax’ or ‘dx’. so using "D" and "=D" just works in this particular case. And yes, one would say, sure, why don't you do "+D" but then: : "+r" (current_stack_pointer), "+D" (page) : [old] "i" (clear_page_orig), [new1] "i" (clear_page_rep), [new2] "i" (clear_page_erms), : "cc", "memory", "rax", "rcx") now find the Waldo^Wcomma which throws a wrench into all this. Because that silly macro has an "input..." consume-all last macro arg and in it, one is supposed to supply input *and* clobbers, leading to silly syntax snafus. Yap, they need to be cleaned up, one fine day... Closes: https://lore.kernel.org/oe-kbuild-all/202406141648.jO9qNGLa-lkp@intel.com/ Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Sean Christopherson <seanjc@google.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20240625112056.GDZnqoGDXgYuWBDUwu@fat_crate.local |
||
|
Josh Poimboeuf
|
9142be9e64 |
x86/syscall: Mark exit[_group] syscall handlers __noreturn
The direct-call syscall dispatch function doesn't know that the exit()
and exit_group() syscall handlers don't return, so the call sites aren't
optimized accordingly.
Fix that by marking the exit syscall declarations __noreturn.
Fixes the following warnings:
vmlinux.o: warning: objtool: x64_sys_call+0x2804: __x64_sys_exit() is missing a __noreturn annotation
vmlinux.o: warning: objtool: ia32_sys_call+0x29b6: __ia32_sys_exit_group() is missing a __noreturn annotation
Fixes:
|
||
|
Peter Zijlstra
|
d2a793dae2 |
x86/alternatives: Add nested alternatives macros
Instead of making increasingly complicated ALTERNATIVE_n()
implementations, use a nested alternative expression.
The only difference between:
ALTERNATIVE_2(oldinst, newinst1, flag1, newinst2, flag2)
and
ALTERNATIVE(ALTERNATIVE(oldinst, newinst1, flag1),
newinst2, flag2)
is that the outer alternative can add additional padding when the inner
alternative is the shorter one, which then results in
alt_instr::instrlen being inconsistent.
However, this is easily remedied since the alt_instr entries will be
consecutive and it is trivial to compute the max(alt_instr::instrlen) at
runtime while patching.
Specifically, after this the ALTERNATIVE_2 macro, after CPP expansion
(and manual layout), looks like this:
.macro ALTERNATIVE_2 oldinstr, newinstr1, ft_flags1, newinstr2, ft_flags2
740:
740: \oldinstr ;
741: .skip -(((744f-743f)-(741b-740b)) > 0) * ((744f-743f)-(741b-740b)),0x90 ;
742: .pushsection .altinstructions,"a" ;
altinstr_entry 740b,743f,\ft_flags1,742b-740b,744f-743f ;
.popsection ;
.pushsection .altinstr_replacement,"ax" ;
743: \newinstr1 ;
744: .popsection ; ;
741: .skip -(((744f-743f)-(741b-740b)) > 0) * ((744f-743f)-(741b-740b)),0x90 ;
742: .pushsection .altinstructions,"a" ;
altinstr_entry 740b,743f,\ft_flags2,742b-740b,744f-743f ;
.popsection ;
.pushsection .altinstr_replacement,"ax" ;
743: \newinstr2 ;
744: .popsection ;
.endm
The only label that is ambiguous is 740, however they all reference the
same spot, so that doesn't matter.
NOTE: obviously only @oldinstr may be an alternative; making @newinstr
an alternative would mean patching .altinstr_replacement which very
likely isn't what is intended, also the labels will be confused in that
case.
[ bp: Debug an issue where it would match the wrong two insns and
and consider them nested due to the same signed offsets in the
.alternative section and use instr_va() to compare the full virtual
addresses instead.
- Use new labels to denote that the new, nested
alternatives are being used when staring at preprocessed output.
- Use the %c constraint everywhere instead of %P and document the
difference for future reference. ]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Co-developed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230628104952.GA2439977@hirez.programming.kicks-ass.net
|
||
Mikulas Patocka
|
6205125bd3 |
objtool: Fix compile failure when using the x32 compiler
When compiling the v6.9-rc1 kernel with the x32 compiler, the following
errors are reported. The reason is that we take an "unsigned long"
variable and print it using "PRIx64" format string.
In file included from check.c:16:
check.c: In function ‘add_dead_ends’:
/usr/src/git/linux-2.6/tools/objtool/include/objtool/warn.h:46:17: error: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 5 has type ‘long unsigned int’ [-Werror=format=]
46 | "%s: warning: objtool: " format "\n", \
| ^~~~~~~~~~~~~~~~~~~~~~~~
check.c:613:33: note: in expansion of macro ‘WARN’
613 | WARN("can't find unreachable insn at %s+0x%" PRIx64,
| ^~~~
...
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: linux-kernel@vger.kernel.org
|
||
|
Linus Torvalds
|
1e3cd03c54 |
LoongArch changes for v6.9
1, Add objtool support for LoongArch;
2, Add ORC stack unwinder support for LoongArch;
3, Add kernel livepatching support for LoongArch;
4, Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig;
5, Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig;
6, Some bug fixes and other small changes.
-----BEGIN PGP SIGNATURE-----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=lSkY
-----END PGP SIGNATURE-----
Merge tag 'loongarch-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Add objtool support for LoongArch
- Add ORC stack unwinder support for LoongArch
- Add kernel livepatching support for LoongArch
- Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig
- Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig
- Some bug fixes and other small changes
* tag 'loongarch-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch/crypto: Clean up useless assignment operations
LoongArch: Define the __io_aw() hook as mmiowb()
LoongArch: Remove superfluous flush_dcache_page() definition
LoongArch: Move {dmw,tlb}_virt_to_page() definition to page.h
LoongArch: Change __my_cpu_offset definition to avoid mis-optimization
LoongArch: Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig
LoongArch: Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig
LoongArch: Add kernel livepatching support
LoongArch: Add ORC stack unwinder support
objtool: Check local label in read_unwind_hints()
objtool: Check local label in add_dead_ends()
objtool/LoongArch: Enable orc to be built
objtool/x86: Separate arch-specific and generic parts
objtool/LoongArch: Implement instruction decoder
objtool/LoongArch: Enable objtool to be built
|
||
|
Linus Torvalds
|
e5eb28f6d1 |
- Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min
heap optimizations". - Kuan-Wei Chiu has also sped up the library sorting code in the series "lib/sort: Optimize the number of swaps and comparisons". - Alexey Gladkov has added the ability for code running within an IPC namespace to alter its IPC and MQ limits. The series is "Allow to change ipc/mq sysctls inside ipc namespace". - Geert Uytterhoeven has contributed some dhrystone maintenance work in the series "lib: dhry: miscellaneous cleanups". - Ryusuke Konishi continues nilfs2 maintenance work in the series "nilfs2: eliminate kmap and kmap_atomic calls" "nilfs2: fix kernel bug at submit_bh_wbc()" - Nathan Chancellor has updated our build tools requirements in the series "Bump the minimum supported version of LLVM to 13.0.1". - Muhammad Usama Anjum continues with the selftests maintenance work in the series "selftests/mm: Improve run_vmtests.sh". - Oleg Nesterov has done some maintenance work against the signal code in the series "get_signal: minor cleanups and fix". Plus the usual shower of singleton patches in various parts of the tree. Please see the individual changelogs for details. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZfMnvgAKCRDdBJ7gKXxA jjKMAP4/Upq07D4wjkMVPb+QrkipbbLpdcgJ++q3z6rba4zhPQD+M3SFriIJk/Xh tKVmvihFxfAhdDthseXcIf1nBjMALwY= =8rVc -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min heap optimizations". - Kuan-Wei Chiu has also sped up the library sorting code in the series "lib/sort: Optimize the number of swaps and comparisons". - Alexey Gladkov has added the ability for code running within an IPC namespace to alter its IPC and MQ limits. The series is "Allow to change ipc/mq sysctls inside ipc namespace". - Geert Uytterhoeven has contributed some dhrystone maintenance work in the series "lib: dhry: miscellaneous cleanups". - Ryusuke Konishi continues nilfs2 maintenance work in the series "nilfs2: eliminate kmap and kmap_atomic calls" "nilfs2: fix kernel bug at submit_bh_wbc()" - Nathan Chancellor has updated our build tools requirements in the series "Bump the minimum supported version of LLVM to 13.0.1". - Muhammad Usama Anjum continues with the selftests maintenance work in the series "selftests/mm: Improve run_vmtests.sh". - Oleg Nesterov has done some maintenance work against the signal code in the series "get_signal: minor cleanups and fix". Plus the usual shower of singleton patches in various parts of the tree. Please see the individual changelogs for details. * tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits) nilfs2: prevent kernel bug at submit_bh_wbc() nilfs2: fix failure to detect DAT corruption in btree and direct mappings ocfs2: enable ocfs2_listxattr for special files ocfs2: remove SLAB_MEM_SPREAD flag usage assoc_array: fix the return value in assoc_array_insert_mid_shortcut() buildid: use kmap_local_page() watchdog/core: remove sysctl handlers from public header nilfs2: use div64_ul() instead of do_div() mul_u64_u64_div_u64: increase precision by conditionally swapping a and b kexec: copy only happens before uchunk goes to zero get_signal: don't initialize ksig->info if SIGNAL_GROUP_EXIT/group_exec_task get_signal: hide_si_addr_tag_bits: fix the usage of uninitialized ksig get_signal: don't abuse ksig->info.si_signo and ksig->sig const_structs.checkpatch: add device_type Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>" dyndbg: replace kstrdup() + strchr() with kstrdup_and_replace() list: leverage list_is_head() for list_entry_is_head() nilfs2: MAINTAINERS: drop unreachable project mirror site smp: make __smp_processor_id() 0-argument macro fat: fix uninitialized field in nostale filehandles ... |
||
|
Linus Torvalds
|
216532e147 |
hardening updates for v6.9-rc1
- string.h and related header cleanups (Tanzir Hasan, Andy Shevchenko)
- VMCI memcpy() usage and struct_size() cleanups (Vasiliy Kovalev, Harshit
Mogalapalli)
- selftests/powerpc: Fix load_unaligned_zeropad build failure (Michael
Ellerman)
- hardened Kconfig fragment updates (Marco Elver, Lukas Bulwahn)
- Handle tail call optimization better in LKDTM (Douglas Anderson)
- Use long form types in overflow.h (Andy Shevchenko)
- Add flags param to string_get_size() (Andy Shevchenko)
- Add Coccinelle script for potential struct_size() use (Jacob Keller)
- Fix objtool corner case under KCFI (Josh Poimboeuf)
- Drop 13 year old backward compat CAP_SYS_ADMIN check (Jingzi Meng)
- Add str_plural() helper (Michal Wajdeczko, Kees Cook)
- Ignore relocations in .notes section
- Add comments to explain how __is_constexpr() works
- Fix m68k stack alignment expectations in stackinit Kunit test
- Convert string selftests to KUnit
- Add KUnit tests for fortified string functions
- Improve reporting during fortified string warnings
- Allow non-type arg to type_max() and type_min()
- Allow strscpy() to be called with only 2 arguments
- Add binary mode to leaking_addresses scanner
- Various small cleanups to leaking_addresses scanner
- Adding wrapping_*() arithmetic helper
- Annotate initial signed integer wrap-around in refcount_t
- Add explicit UBSAN section to MAINTAINERS
- Fix UBSAN self-test warnings
- Simplify UBSAN build via removal of CONFIG_UBSAN_SANITIZE_ALL
- Reintroduce UBSAN's signed overflow sanitizer
-----BEGIN PGP SIGNATURE-----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=OP+o
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"As is pretty normal for this tree, there are changes all over the
place, especially for small fixes, selftest improvements, and improved
macro usability.
Some header changes ended up landing via this tree as they depended on
the string header cleanups. Also, a notable set of changes is the work
for the reintroduction of the UBSAN signed integer overflow sanitizer
so that we can continue to make improvements on the compiler side to
make this sanitizer a more viable future security hardening option.
Summary:
- string.h and related header cleanups (Tanzir Hasan, Andy
Shevchenko)
- VMCI memcpy() usage and struct_size() cleanups (Vasiliy Kovalev,
Harshit Mogalapalli)
- selftests/powerpc: Fix load_unaligned_zeropad build failure
(Michael Ellerman)
- hardened Kconfig fragment updates (Marco Elver, Lukas Bulwahn)
- Handle tail call optimization better in LKDTM (Douglas Anderson)
- Use long form types in overflow.h (Andy Shevchenko)
- Add flags param to string_get_size() (Andy Shevchenko)
- Add Coccinelle script for potential struct_size() use (Jacob
Keller)
- Fix objtool corner case under KCFI (Josh Poimboeuf)
- Drop 13 year old backward compat CAP_SYS_ADMIN check (Jingzi Meng)
- Add str_plural() helper (Michal Wajdeczko, Kees Cook)
- Ignore relocations in .notes section
- Add comments to explain how __is_constexpr() works
- Fix m68k stack alignment expectations in stackinit Kunit test
- Convert string selftests to KUnit
- Add KUnit tests for fortified string functions
- Improve reporting during fortified string warnings
- Allow non-type arg to type_max() and type_min()
- Allow strscpy() to be called with only 2 arguments
- Add binary mode to leaking_addresses scanner
- Various small cleanups to leaking_addresses scanner
- Adding wrapping_*() arithmetic helper
- Annotate initial signed integer wrap-around in refcount_t
- Add explicit UBSAN section to MAINTAINERS
- Fix UBSAN self-test warnings
- Simplify UBSAN build via removal of CONFIG_UBSAN_SANITIZE_ALL
- Reintroduce UBSAN's signed overflow sanitizer"
* tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (51 commits)
selftests/powerpc: Fix load_unaligned_zeropad build failure
string: Convert helpers selftest to KUnit
string: Convert selftest to KUnit
sh: Fix build with CONFIG_UBSAN=y
compiler.h: Explain how __is_constexpr() works
overflow: Allow non-type arg to type_max() and type_min()
VMCI: Fix possible memcpy() run-time warning in vmci_datagram_invoke_guest_handler()
lib/string_helpers: Add flags param to string_get_size()
x86, relocs: Ignore relocations in .notes section
objtool: Fix UNWIND_HINT_{SAVE,RESTORE} across basic blocks
overflow: Use POD in check_shl_overflow()
lib: stackinit: Adjust target string to 8 bytes for m68k
sparc: vdso: Disable UBSAN instrumentation
kernel.h: Move lib/cmdline.c prototypes to string.h
leaking_addresses: Provide mechanism to scan binary files
leaking_addresses: Ignore input device status lines
leaking_addresses: Use File::Temp for /tmp files
MAINTAINERS: Update LEAKING_ADDRESSES details
fortify: Improve buffer overflow reporting
fortify: Add KUnit tests for runtime overflows
...
|
||
|
Linus Torvalds
|
685d982112 |
Core x86 changes for v6.9:
- The biggest change is the rework of the percpu code,
to support the 'Named Address Spaces' GCC feature,
by Uros Bizjak:
- This allows C code to access GS and FS segment relative
memory via variables declared with such attributes,
which allows the compiler to better optimize those accesses
than the previous inline assembly code.
- The series also includes a number of micro-optimizations
for various percpu access methods, plus a number of
cleanups of %gs accesses in assembly code.
- These changes have been exposed to linux-next testing for
the last ~5 months, with no known regressions in this area.
- Fix/clean up __switch_to()'s broken but accidentally
working handling of FPU switching - which also generates
better code.
- Propagate more RIP-relative addressing in assembly code,
to generate slightly better code.
- Rework the CPU mitigations Kconfig space to be less idiosyncratic,
to make it easier for distros to follow & maintain these options.
- Rework the x86 idle code to cure RCU violations and
to clean up the logic.
- Clean up the vDSO Makefile logic.
- Misc cleanups and fixes.
[ Please note that there's a higher number of merge commits in
this branch (three) than is usual in x86 topic trees. This happened
due to the long testing lifecycle of the percpu changes that
involved 3 merge windows, which generated a longer history
and various interactions with other core x86 changes that we
felt better about to carry in a single branch. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=3v4F
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
- The biggest change is the rework of the percpu code, to support the
'Named Address Spaces' GCC feature, by Uros Bizjak:
- This allows C code to access GS and FS segment relative memory
via variables declared with such attributes, which allows the
compiler to better optimize those accesses than the previous
inline assembly code.
- The series also includes a number of micro-optimizations for
various percpu access methods, plus a number of cleanups of %gs
accesses in assembly code.
- These changes have been exposed to linux-next testing for the
last ~5 months, with no known regressions in this area.
- Fix/clean up __switch_to()'s broken but accidentally working handling
of FPU switching - which also generates better code
- Propagate more RIP-relative addressing in assembly code, to generate
slightly better code
- Rework the CPU mitigations Kconfig space to be less idiosyncratic, to
make it easier for distros to follow & maintain these options
- Rework the x86 idle code to cure RCU violations and to clean up the
logic
- Clean up the vDSO Makefile logic
- Misc cleanups and fixes
* tag 'x86-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/idle: Select idle routine only once
x86/idle: Let prefer_mwait_c1_over_halt() return bool
x86/idle: Cleanup idle_setup()
x86/idle: Clean up idle selection
x86/idle: Sanitize X86_BUG_AMD_E400 handling
sched/idle: Conditionally handle tick broadcast in default_idle_call()
x86: Increase brk randomness entropy for 64-bit systems
x86/vdso: Move vDSO to mmap region
x86/vdso/kbuild: Group non-standard build attributes and primary object file rules together
x86/vdso: Fix rethunk patching for vdso-image-{32,64}.o
x86/retpoline: Ensure default return thunk isn't used at runtime
x86/vdso: Use CONFIG_COMPAT_32 to specify vdso32
x86/vdso: Use $(addprefix ) instead of $(foreach )
x86/vdso: Simplify obj-y addition
x86/vdso: Consolidate targets and clean-files
x86/bugs: Rename CONFIG_RETHUNK => CONFIG_MITIGATION_RETHUNK
x86/bugs: Rename CONFIG_CPU_SRSO => CONFIG_MITIGATION_SRSO
x86/bugs: Rename CONFIG_CPU_IBRS_ENTRY => CONFIG_MITIGATION_IBRS_ENTRY
x86/bugs: Rename CONFIG_CPU_UNRET_ENTRY => CONFIG_MITIGATION_UNRET_ENTRY
x86/bugs: Rename CONFIG_SLS => CONFIG_MITIGATION_SLS
...
|
||
|
Tiezhu Yang
|
e91c5e4c21 |
objtool: Check local label in read_unwind_hints()
When update the latest upstream gcc and binutils, it generates some objtool warnings on LoongArch, like this: arch/loongarch/kernel/entry.o: warning: objtool: ret_from_fork+0x0: unreachable instruction We can see that the reloc sym name is local label instead of section in relocation section '.rela.discard.unwind_hints', in this case, the reloc sym type is STT_NOTYPE instead of STT_SECTION. Let us check it to not return -1, then use reloc->sym->offset instead of reloc addend which is 0 to find the corresponding instruction. Here are some detailed info: [fedora@linux 6.8.test]$ gcc --version gcc (GCC) 14.0.1 20240129 (experimental) [fedora@linux 6.8.test]$ as --version GNU assembler (GNU Binutils) 2.42.50.20240129 [fedora@linux 6.8.test]$ readelf -r arch/loongarch/kernel/entry.o | grep -A 3 "rela.discard.unwind_hints" Relocation section '.rela.discard.unwind_hints' at offset 0x3a8 contains 7 entries: Offset Info Type Sym. Value Sym. Name + Addend 000000000000 000a00000063 R_LARCH_32_PCREL 0000000000000000 .Lhere_1 + 0 00000000000c 000b00000063 R_LARCH_32_PCREL 00000000000000a8 .Lhere_50 + 0 Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Tiezhu Yang
|
d5ab2bc36c |
objtool: Check local label in add_dead_ends()
When update the latest upstream gcc and binutils, it generates more objtool warnings on LoongArch, like this: init/main.o: warning: objtool: unexpected relocation symbol type in .rela.discard.unreachable We can see that the reloc sym name is local label instead of section in relocation section '.rela.discard.unreachable', in this case, the reloc sym type is STT_NOTYPE instead of STT_SECTION. As suggested by Peter Zijlstra, we add a "local_label" member in struct symbol, then set it as true if symbol type is STT_NOTYPE and symbol name starts with ".L" string in classify_symbols(). Let's check reloc->sym->local_label to not return -1 in add_dead_ends(), and also use reloc->sym->offset instead of reloc addend which is 0 to find the corresponding instruction. At the same time, let's replace the variable "addend" with "offset" to reflect the reality. Here are some detailed info: [fedora@linux 6.8.test]$ gcc --version gcc (GCC) 14.0.1 20240129 (experimental) [fedora@linux 6.8.test]$ as --version GNU assembler (GNU Binutils) 2.42.50.20240129 [fedora@linux 6.8.test]$ readelf -r init/main.o | grep -A 2 "rela.discard.unreachable" Relocation section '.rela.discard.unreachable' at offset 0x6028 contains 1 entry: Offset Info Type Sym. Value Sym. Name + Addend 000000000000 00d900000063 R_LARCH_32_PCREL 00000000000002c4 .L500^B1 + 0 Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Tiezhu Yang
|
3c7266cd7b |
objtool/LoongArch: Enable orc to be built
Implement arch-specific init_orc_entry(), write_orc_entry(), reg_name(), orc_type_name(), print_reg() and orc_print_dump(), then set BUILD_ORC as y to build the orc related files. Co-developed-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Jinyang He <hejinyang@loongson.cn> Co-developed-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Tiezhu Yang
|
b8e85e6f3a |
objtool/x86: Separate arch-specific and generic parts
Move init_orc_entry(), write_orc_entry(), reg_name(), orc_type_name() and print_reg() from generic orc_gen.c and orc_dump.c to arch-specific orc.c, then introduce a new function orc_print_dump() to print info. This is preparation for later patch, no functionality change. Co-developed-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Jinyang He <hejinyang@loongson.cn> Co-developed-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Tiezhu Yang
|
b2d23158e6 |
objtool/LoongArch: Implement instruction decoder
Only copy the minimal definitions of instruction opcodes and formats in inst.h from arch/loongarch to tools/arch/loongarch, and also copy the definition of sign_extend64() to tools/include/linux/bitops.h to decode the following kinds of instructions: (1) stack pointer related instructions addi.d, ld.d, st.d, ldptr.d and stptr.d (2) branch and jump related instructions beq, bne, blt, bge, bltu, bgeu, beqz, bnez, bceqz, bcnez, b, bl and jirl (3) other instructions break, nop and ertn See more info about instructions in LoongArch Reference Manual: https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html Co-developed-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Jinyang He <hejinyang@loongson.cn> Co-developed-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Tiezhu Yang
|
e8aff71ca9 |
objtool/LoongArch: Enable objtool to be built
Add the minimal changes to enable objtool build on LoongArch,
most of the functions are stubs to only fix the build errors
when make -C tools/objtool.
This is similar with commit
|
||
|
Josh Poimboeuf
|
10b4c4bce3 |
objtool: Fix UNWIND_HINT_{SAVE,RESTORE} across basic blocks
If SAVE and RESTORE unwind hints are in different basic blocks, and
objtool sees the RESTORE before the SAVE, it errors out with:
vmlinux.o: warning: objtool: vmw_port_hb_in+0x242: objtool isn't smart enough to handle this CFI save/restore combo
In such a case, defer following the RESTORE block until the
straight-line path gets followed later.
Fixes:
|
||
Kees Cook
|
475ddf1fce |
fortify: Split reporting and avoid passing string pointer
In preparation for KUnit testing and further improvements in fortify failure reporting, split out the report and encode the function and access failure (read or write overflow) into a single u8 argument. This mainly ends up saving a tiny bit of space in the data segment. For a defconfig with FORTIFY_SOURCE enabled: $ size gcc/vmlinux.before gcc/vmlinux.after text data bss dec hex filename 26132309 9760658 2195460 38088427 2452eeb gcc/vmlinux.before 26132386 9748382 2195460 38076228 244ff44 gcc/vmlinux.after Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Kees Cook <keescook@chromium.org> |
||
Geert Uytterhoeven
|
ac4db926e1 |
init: remove obsolete arch_call_rest_init() wrapper
Since commit
|
||
H. Peter Anvin (Intel)
|
cd19bab825 |
x86/objtool: Teach objtool about ERET[US]
Update the objtool decoder to know about the ERET[US] instructions (type INSN_CONTEXT_SWITCH). Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com> Signed-off-by: Xin Li <xin3.li@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Tested-by: Shan Kang <shan.kang@intel.com> Link: https://lore.kernel.org/r/20231205105030.8698-11-xin3.li@intel.com |
||
Breno Leitao
|
0911b8c52c |
x86/bugs: Rename CONFIG_RETHUNK => CONFIG_MITIGATION_RETHUNK
Step 10/10 of the namespace unification of CPU mitigations related Kconfig options. [ mingo: Added one more case. ] Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20231121160740.1249350-11-leitao@debian.org |
||
|
Breno Leitao
|
aefb2f2e61 |
x86/bugs: Rename CONFIG_RETPOLINE => CONFIG_MITIGATION_RETPOLINE
Step 5/10 of the namespace unification of CPU mitigations related Kconfig options. [ mingo: Converted a few more uses in comments/messages as well. ] Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Ariel Miculas <amiculas@cisco.com> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20231121160740.1249350-6-leitao@debian.org |
||
|
Linus Torvalds
|
669d089a7f |
Address a GCC-14 warning: there's no real bug, but indeed the calloc order doesn't match
the prototype. (Side note: we should really add zalloc() for such cases.) Signed-off-by: Ingo Molnar <mingo@kernel.org> -----BEGIN PGP SIGNATURE----- iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmWbvjgRHG1pbmdvQGtl cm5lbC5vcmcACgkQEnMQ0APhK1gxJg//QBDT7Y3p91uRM/XknJ5wTZIuVg48gRoL t0fvCtgcE2SPzpJCy45OzJsWlp9ehJEJtJZHNgcoKwbEEbupbo+N9F3XIkuA55GT j9esp4ZeXqv4L6HO/dTIyQIrF69vzRq8Z0LoYi7O+7RZy7ZWivO+yJpGb8xN+SW2 XkFlXTB7CTJXMGZ++CO0aeIHJxi3hANSv19dpaMYRrmueDM/6BBY8RiJwWUqt7Cw ZK0IuZBRhB0XR4tU3eevJQhxza6+VlPUxPXY6jVC5pg9yPd5ccigYPmDm7Jez3oB nTdY6mHrGMakK8y4VJDDoU/2cY83A3rS8RxLPCO2Z0IkTmI0IY4lJ5/IlGQO0+r/ RWrnoD7BXCSN7/bws+FcDREl1tClIQBiAreeNBi3GpAsxNC+FnmaA4bGHpEHxZJR PrbTHotXk04HsJULJgt1kA81di7/WJBszQqVKeKRDv5Q9o6t4vpXaVxLUDFb3W7+ /hpyjozfJUKFOcbLQa7eQlyrkzsPdtOp4Ga4MW9bsuaNPYlz9GswS3ubFo9eQcKm /CiwLUwqiQ4E7PNlfjESnhH4q557Gim9C2JDXi9hbv3PWlqhM5DWebo+qNsEx3SC i8IeClzDk9PDLxngJIhMBjyAmlBESZ1CzpzGo7yckLEMbRfAWLvsA80N5Ii8i0AO R4VIVtxQyAs= =3zAc -----END PGP SIGNATURE----- Merge tag 'objtool-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fixlet from Ingo Molnar: "Address a GCC-14 warning: there's no real bug, but indeed the calloc order doesn't match the prototype. (Side note: we should really add zalloc() for such cases)" * tag 'objtool-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix calloc call for new -Walloc-size |