-Wunused-but-set-variable generates a compile warning for lcs' tasklet
function. Invoked functions contain already error handling; thus
additional return code checking is not needed here.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove unused return code handling. The claw driver is mostly dead, so
just make sure it keeps compiling without warnings.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fill in the owner of qeth's ccw device driver.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch improves FFDC (first failure data capture) by requesting
a hardware trace in case the device driver, the hardware or a user
detects an error.
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set rx csum default to hw checksumming again.
Remove sysfs interface for rx csum (checksumming) and TSO (large_send).
With the new hw_features it does not work to keep the old sysfs
interface in parallel. Convert options.checksum_type to new hw_features.
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's a hot function, and we're better off not mixing types in the mask
calculations. The compiler just ends up mixing 16-bit and 32-bit
operations, for no good reason.
So do everything in 'unsigned int' rather than mixing 'unsigned int'
masking with a 'umode_t' (16-bit) mode variable.
This, together with the parent commit (47a150edc2: "Cache user_ns in
struct cred") makes acl_permission_check() much nicer.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If !CONFIG_USERNS, have current_user_ns() defined to (&init_user_ns).
Get rid of _current_user_ns. This requires nsown_capable() to be
defined in capability.c rather than as static inline in capability.h,
so do that.
Request_key needs init_user_ns defined at current_user_ns if
!CONFIG_USERNS, so forward-declare that in cred.h if !CONFIG_USERNS
at current_user_ns() define.
Compile-tested with and without CONFIG_USERNS.
Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
[ This makes a huge performance difference for acl_permission_check(),
up to 30%. And that is one of the hottest kernel functions for loads
that are pathname-lookup heavy. ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Driver checks if the previous dump has been cleared before taking the dump.
It doesn't take the dump if it is not cleared.
Changes from v2:
Added lock to protect dump data structures from being mangled while
dumping or setting them via ethtool.
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Added code to take FW dump.
o Driver queries FW at the init time and gets the dump template
o It takes FW dump as per the dump template
o Level of FW dump (and its size) is configured via dump flag
Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sending mbox cmds require multiple steps of writing to the DB register and polling
for an ack. Gettting interrupted in the middle by a signal breaks the mbox protocol.
Use msleep() to not get interrupted.
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If waiting on POST returns prematurely (due to a signal), abort polling and return an error.
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Added code to take FW dump via ethtool. Dump level can be controlled via setting the
dump flag. A get function is provided to query the current setting of the dump flag.
Dump data is obtained from the driver via a separate get function.
Changes from v3:
Fixed buffer length issue in ethtool_get_dump_data function.
Updated kernel doc for ethtool_dump struct and get_dump_flag function.
Changes from v2:
Provided separate commands for get flag and data.
Check for minimum of the two buffer length obtained via ethtool and driver and
use that for dump buffer
Pass up the driver return error codes up to the caller.
Added kernel doc comments.
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During resource migration, if the target node were to die, the thread doing
the migration spins until the target node is not removed from the domain map.
This patch slows the spin by making the thread wait for the recovery to kick in.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
Patch skips mount recovery for hard-ro mounts which otherwise leads to an oops.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
If o2hb finds unexpected values in the heartbeat slot, it prints a message
"ERROR: Device "dm-6": another node is heartbeating in our slot!"
This message could be misleading. This patch adds two more messages to
help users better diagnose the problem.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
We have seen isolated cases (very few, I might add) of o2hb not detecting all
live nodes on startup. One plausible reasoning for it is that other node had
a hb io delay at the same time. The live threshold set at 2 (as low as it can
be) could be increased to ameliorate the situation.
But increasing the threshold directly affects mount time. Currently it takes
around 5 secs to mount a volume in o2cb cluster with local heartbeat. Increasing
the threshold will make mounts even slower. As the issue itself is rare, we have
left things as they are for the local heartbeat mode.
However we can improve the situation for global heartbeat mode as in that mode,
we start the heartbeat much before the mount.
This patch doubles the live threshold for the start of the first region in
global heartbeat mode.
Addresses internal Oracle bug#10635585.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
Patch fixes a bug in the o2dlm protocol negotiation in that it is using
the builtin version rather than the negotiated version during the domain
join. This causes join errors when a node having kernel >= 2.6.37 joins
a cluster with nodes having kernels < 2.6.37.
This only affects the o2cb cluster stack.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Reported-by: Jacek Stepniewski <Jacek.Stepniewski@agora.pl>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
In the case of removing a partial extent record which covers a hole, current
punching-hole logic will try to remove more than the length of whole extent
record, which leads to the failure of following assert(fs/ocfs2/alloc.c):
5507 BUG_ON(cpos < le32_to_cpu(rec->e_cpos) || trunc_range > rec_range);
This patch tries to skip existing hole at the last attempt of removing a partial
extent record, what's more, it also adds some necessary comments for better
understanding of punching-hole codes.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
CLANG found that there is a path that has data_ac uninitialized,
this place
2917 /* This gets us the dx_root */
2918 ret = ocfs2_reserve_new_metadata_blocks(osb, 1, &meta_ac);
2919 if (ret) {
3
Taking true branch
2920 mlog_errno(ret);
2921 goto out;
4
Control jumps to line 3168
2922 }
Goes to the out: label without data_ac being initialized.
Ciao, Marcus
Signed-Off-By: Marcus Meissner <meissner@suse.de>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <jlbec@evilplan.org>
Provide real card and bus_info instead of hardcoded values.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
struct snd_card *card is present in struct snd_tea575x but never used.
Remove it.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
freq_fixup is a constant, no need to hold it in struct snd_tea575x and set in
each driver.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Similarly like other Conexant codecs, now model=auto is supported for
cxt5047.
But the auto-parser mode isn't activated as default yet, since BIOS
pin-configs seem often broken on machines with this codec. User need
to pass model=auto explicitly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The pad argument to iwlagn_txq_free_tfd
isn't used, remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
All of these functions no longer need to be
accessed indirectly since they're shared in
all AGN devices.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
In a subsequent patch, I want to make commands use
multiple TBs in a TFD. This is a simple change to
prepare the data structures for this, with as of
now still just a single TB supported.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
wait_task_stopped() tested task_stopped_code() without acquiring
siglock and, if stop condition existed, called wait_task_stopped() and
directly returned the result. This patch moves the initial
task_stopped_code() testing into wait_task_stopped() and make
wait_consider_task() fall through to wait_task_continue() on 0 return.
This is for the following two reasons.
* Because the initial task_stopped_code() test is done without
acquiring siglock, it may race against SIGCONT generation. The
stopped condition might have been replaced by continued state by the
time wait_task_stopped() acquired siglock. This may lead to
unexpected failure of WNOHANG waits.
This reorganization addresses this single race case but there are
other cases - TASK_RUNNING -> TASK_STOPPED transition and EXIT_*
transitions.
* Scheduled ptrace updates require changes to the initial test which
would fit better inside wait_task_stopped().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
When re-mounting from R/O mode to R/W mode and the LEB count in the superblock
is not up-to date, because for the underlying UBI volume became larger, we
re-write the superblock. We allocate RAM for these purposes, but never free it.
So this is a memory leak, although very rare one.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: stable@kernel.org
This patch fixes a problem with the following symptoms:
UBIFS: deferred recovery completed
UBIFS error (pid 15676): dbg_check_synced_i_size: ui_size is 11481088, synced_i_size is 11459081, but inode is clean
UBIFS error (pid 15676): dbg_check_synced_i_size: i_ino 128, i_mode 0x81a4, i_size 11481088
It happens when additional debugging checks are enabled and we are recovering
from a power cut. When we fixup corrupted inode size during recovery, we change
them in-place and we change ui_size as well, but not synced_i_size, which
causes this failure. This patch makes sure we change both fields and fixes the
issue.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
When the debugging self-checks are enabled, we go trough whole file-system
after mount and check/validate every single node referred to by the index.
This is implemented by the 'dbg_check_filesystem()' function. However, this
function fails if we mount "unclean" file-system, i.e., if we mount the
file-system after a power cut. It fails with the following symptoms:
UBIFS DBG (pid 8171): ubifs_recover_size: ino 937 size 3309925 -> 3317760
UBIFS: recovery deferred
UBIFS error (pid 8171): check_leaf: data node at LEB 1000:0 is not within inode size 3309925
The reason of failure is that recovery fixed up the inode size in memory, but
not on the flash so far. So the value on the flash is incorrect so far,
and would be corrected when we re-mount R/W. But 'check_leaf()' ignores
this fact and tries to validate the size of the on-flash inode, which is
incorrect, so it fails.
This patch teaches the checking code to look at the VFS inode cache first,
and if there is the inode in question, use that inode instead of the inode
on the flash media. This fixes the issue.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
In 'ubifs_recover_size()' we have an "if (!e->inode && c->ro_mount)" statement.
But if 'c->ro_mount' is true, then '!e->inode' must always be true as well. So
we can remove the unnecessary '!e->inode' test and put an
'ubifs_assert(!e->inode)' instead.
This patch also removes an extra trailing white-space in a debugging print,
as well as adds few empty lines to 'ubifs_recover_size()' to make it a bit more
readable.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
When recovering the inode size, one of the debugging messages was printed
incorrecly, this patches fixes it.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
This commits refactors and cleans up 'ubifs_rcvry_gc_commit()' which was quite
untidy, also removes the commentary which was not 100% correct.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Split the 'ubifs_rcvry_gc_commit()' function and introduce a 'grab_empty_leb()'
heler. This cleans 'ubifs_rcvry_gc_commit()' a little and makes it a bit less
of spagetti.
Also, add a commentary which explains why it is crucial to first search for an
empty LEB and then run commit.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
When UBIFS is in the failure mode (used for power cut emulation testing) we for
some reasons do not dump the stack in many places, e.g., in assertions.
Probably at early days we had too many of them and disabled this to make the
development easier, but then never enabled. Nowadays I sometimes observe
assertion failures during power cut testing, but the useful stackdump is not
printed, which is bad. This patch makes UBIFS always print the stackdump when
debugging is enabled.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
If we fail to recover the gc_lnum we just return an error and it then
it is difficult to figure out why this happened. This patch adds useful
debugging information which should make it easier to debug the failure.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
This patch removes a piece of code in 'ubifs_rcvry_gc_commit()' which is never
executed. We call 'ubifs_find_dirty_leb()' function with min_space =
wbuf->offs, so if it returns us an LEB, it is guaranteed to have at lease
'wbuf->offs' bytes of free+dirty space. So we can remove the subsequent code
which deals with "returned LEB has less than 'wbuf->offs' bytes of free+dirty
space". This simplifies 'ubifs_rcvry_gc_commit()' a little.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
We have duplicated code in 'ubifs_garbage_collect()' and
'ubifs_rcvry_gc_commit()', which is about handling the special case of free
LEB. In both cases we just want to garbage-collect the LEB using
'ubifs_garbage_collect_leb()'.
This patch teaches 'ubifs_garbage_collect_leb()' to handle free LEB's so that
the caller does not have to do this and the duplicated code is removed.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Remove the following commentary from 'ubifs_file_mmap()':
/* 'generic_file_mmap()' takes care of NOMMU case */
I do not understand what it means, and I could not find anything relater to
NOMMU in 'generic_file_mmap()'.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
This patch is a tiny improvement which removes few bytes of code.
UBIFS debugfs files are non-seekable and the file position is ignored,
so do not increase it in the write handler.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
The 'dbg_dump_lprop()' is trying to detect journal head LEBs when printing,
so it looks at the write-buffers. However, if we are in R/O mode, we
de-allocate the write-buffers, so 'dbg_dump_lprop()' oopses. This patch fixes
the issue.
Note, this patch is not critical, it is only about the debugging code path, and
it is unlikely that anyone but UBIFS developers would ever hit this issue.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
We have our own flags indicating R/O mode, and c->ro_mode is equivalent
to MS_RDONLY. Let's be consistent and use UBIFS flags everywhere.
This patch is just a minor cleanup.
Additionally, add a comment that we are surprised with VFS behavior -
as a reminder to look at this some day.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
When the debugging failure emulation is enabled and UBIFS decides to
emulate an I/O error, it uses EIO error code. In which case UBIFS
switches into R/O mode later on. The for the user-space is that when
a failure is emulated, the file-system sometimes returns EIO and
sometimes EROFS. This makes it more difficult to implement user-space
tests for the failure mode. Let's be consistent and return EROFS in
all the cases.
This patch is an improvement for the debugging code and does not affect
the functionality at all.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
This is just a tiny clean-up patch. The variable name for empty address
space operations is "empty_aops". Let's use consistent names for empty
inode and file operations: "empty_iops" and "empty_fops", instead of
inconsistent "none_inode_operations" and "none_file_operations".
Artem: re-write the commit message.
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Try to improve UBIFS testing coverage by randomly picking LEBs to
store in lsave, rather than picking them optimally. Create a debugging
version of 'populate_lsave()' for these purposes and enable it when
general debugging self-checks are enabled.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
UBIFS can force itself to use the 'in-the-gaps' commit method - the last resort
method which is normally invoced very very rarely. Currently this "force
int-the-gaps" debugging feature is a separate test mode. But it is a bit saner
to make it to be the "general" self-test check instead.
This patch is just a clean-up which should make the debugging code look a bit
nicer and easier to use - we have way too many debugging options.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>