Commit graph

254,703 commits

Author SHA1 Message Date
shaohua.li@intel.com
3ac0cc4508 block: hold queue if flush is running for non-queueable flush drive
In some drives, flush requests are non-queueable. When flush request is
running, normal read/write requests can't run. If block layer dispatches
such request, driver can't handle it and requeue it.  Tejun suggested we
can hold the queue when flush is running. This can avoid unnecessary
requeue.  Also this can improve performance. For example, we have
request flush1, write1, flush 2. flush1 is dispatched, then queue is
hold, write1 isn't inserted to queue. After flush1 is finished, flush2
will be dispatched. Since disk cache is already clean, flush2 will be
finished very soon, so looks like flush2 is folded to flush1.

In my test, the queue holding completely solves a regression introduced by
commit 53d63e6b0d:

    block: make the flush insertion use the tail of the dispatch list

    It's not a preempt type request, in fact we have to insert it
    behind requests that do specify INSERT_FRONT.

which causes about 20% regression running a sysbench fileio
workload.

Stable: 2.6.39 only

Cc: stable@kernel.org
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 11:36:25 -06:00
shaohua.li@intel.com
f387693095 block: add a non-queueable flush flag
flush request isn't queueable in some drives. Add a flag to let driver
notify block layer about this. We can optimize flush performance with the
knowledge.

Stable: 2.6.39 only

Cc: stable@kernel.org
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 11:36:25 -06:00
Linus Torvalds
e5e06985be Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] fix oops in scsi_run_queue()
2011-05-06 10:01:54 -07:00
Vasanthakumar Thiagarajan
b83963b3c4 ath6kl: Remove ununsed macros from gpio_reg.h
After this there is no difference between hw2.0/hw/gpio_reg.h
and hw4.0/hw/gpio_reg.h, so remove the duplication.

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-06 09:31:55 -07:00
Vasanthakumar Thiagarajan
eb050f4c01 ath6kl: Remove gpio.h and gpio_api.h
The macros and function proto types in these files are
not used anywhere.

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-06 09:31:55 -07:00
Vasanthakumar Thiagarajan
7c370f9150 ath6kl: Remove unused eeprom.c
Also delete si_reg.h which is only used in eeprom.c

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-06 09:31:55 -07:00
Vasanthakumar Thiagarajan
0ef18385ee ath6kl: Remove dead code with CONFIG_AR6002_REV1_FORCE_HOST
This is not defined anywhere, also delete vmc_reg.h which is
used only in the dead code.

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-06 09:31:55 -07:00
Vasanthakumar Thiagarajan
d67acf6d72 ath6kl: Remove somemore unused header files
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-06 09:31:45 -07:00
Rob Landley
6151658751 Correct occurrences of
- Documentation/kvm/ to Documentation/virtual/kvm
- Documentation/uml/ to Documentation/virtual/uml
- Documentation/lguest/ to Documentation/virtual/lguest
throughout the kernel source tree.

Signed-off-by: Rob Landley <rob@landley.net>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
2011-05-06 09:27:55 -07:00
Alan Cox
b644c7ce18 gma500: The MID devices have the register offset different
This is another small step towards getting Moorestown/Oaktrail support to
work but for Moorestown at least we still need to sort out GEM backed base
framebuffer, which means figuring out why GEM explodes early on at the
moment.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-06 09:27:35 -07:00
Larry Finger
9fada0a0c5 staging: vt6655: Fix warnings if CONFIG_PM is not defined
If staging:vt6655 is built without CONFIG_DM being defined, there are large
numbers of warnings of the following form due to use of #if instead of #ifdef:

In file included from drivers/staging/vt6655/upc.h:32,
                 from drivers/staging/vt6655/mac.h:39,
                 from drivers/staging/vt6655/wroute.c:34:
drivers/staging/vt6655/device.h:399:5: warning: "CONFIG_PM" is not defined

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-06 09:27:34 -07:00
Grant Grundler
4b455e0dab staging: brcm80211: SDIO/MMC cleanups
misc coding style cleanups to dhd_sdio/sdmmc

o replace PKTFREE2 macro with static dhdsdio_pktfree2()
o drop "delta" local var
o drop GSPI_PR55150_BAILOUT
o reformat some of the comments (white space changes)
o drop dhd_bcmsdh_recv_buf wrapper and directly call bcmsdh_recv_buf

Signed-off-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-06 09:27:34 -07:00
K. Y. Srinivasan
23c5605c7d Staging: hv: Add the necessary dependencies to hyperv Kconfig
The vmbus driver dependes on ACPI and PCI subsystems. Change
Kconfig to reflect this.

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-06 09:27:34 -07:00
Rob Landley
570aa13a5d Add a 00-INDEX file to Documentation/virtual
Remove uml from the top level 00-INDEX file.

Signed-off-by: Rob Landley <rlandley@parallels.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
2011-05-06 09:23:23 -07:00
Rob Landley
ed16648eb5 Move kvm, uml, and lguest subdirectories under a common "virtual" directory, I.E:
cd Documentation
  mkdir virtual
  git mv kvm uml lguest virtual

Signed-off-by: Rob Landley <rlandley@parallels.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
2011-05-06 09:22:02 -07:00
Timo Warns
fa039d5f6b Validate size of EFI GUID partition entries.
Otherwise corrupted EFI partition tables can cause total confusion.

Signed-off-by: Timo Warns <warns@pre-sense.de>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-06 07:46:37 -07:00
Jens Axboe
edc83d47a9 cciss: fix compile issue
drivers/block/cciss.c: In function ‘cciss_send_reset’:
drivers/block/cciss.c:2515:2: error: implicit declaration of function ‘fill_cmd’
drivers/block/cciss.c: At top level:
drivers/block/cciss.c:2531:12: error: conflicting types for ‘fill_cmd’
drivers/block/cciss.c:2534:1: note: an argument type that has a default promotion can’t match an empty parameter name list declaration
drivers/block/cciss.c:2515:18: note: previous implicit declaration of ‘fill_cmd’ was here
make[1]: *** [drivers/block/cciss.o] Error 1
make: *** [drivers/block/cciss.o] Error 2

Move fill_cmd() to above where it is first used.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:27:00 -06:00
Stephen M. Cameron
8a4ec67bd5 cciss: add cciss_tape_cmds module paramter
This is to allow number of commands reserved for use by SCSI tape drives
and medium changers to be adjusted at driver load time via the kernel
parameter cciss_tape_cmds, with a default value of 6, and a range
of 2 - 16 inclusive.  Previously, the driver limited the number of
commands which could be queued to the SCSI half of the the driver
to only 2.  This is to fix the problem that if you had more than
two tape drives, you couldn't, for example, erase or rewind them all
at the same time.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:23:59 -06:00
Stephen M. Cameron
063d2cf72a cciss: do not use bit 2 doorbell reset
It causes NMIs which are undesirable at best, unsurvivable at worst.
Prefer the soft reset instead.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:23:58 -06:00
Stephen M. Cameron
ec52d5f1cb cciss: do not attempt PCI power management reset method if we know it won't work.
Just go straight to the soft-reset method instead.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:23:57 -06:00
Stephen M. Cameron
93c46c2fa7 cciss: remove superfluous sleeps around reset code
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:23:56 -06:00
Stephen M. Cameron
5afe278114 cciss: do soft reset if hard reset is broken
on driver load, if reset_devices is set, and the hard reset
attempts fail, try to bring up the controller to the point that
a command can be sent, and send it a soft reset command, then
after the reset undo whatever driver initialization was done to get
it to the point to take a command, and re-do it after the reset.

This is to get kdump to work on all the "non-resettable" controllers
(except 64xx controllers which can't be reset due to the potentially
shared cache module.)

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:23:56 -06:00
Stephen M. Cameron
bf2e2e6b87 cciss: use new doorbell-bit-5 reset method
The bit-2-doorbell reset method seemed to cause (survivable) NMIs
on some systems and (unsurvivable) IOCK NMIs on some G7 servers.
Firmware guys implemented a new doorbell method to alleviate these
problems triggered by bit 5 of the doorbell register.  We want to
use it if it's available.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:23:55 -06:00
Stephen M. Cameron
3e28601fdf cciss: increase timeouts for post-reset no-ops
Just to reduce the messages about timeouts that appear.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:23:54 -06:00
Stephen M. Cameron
59ec86bb98 cciss: clarify messages around reset behavior
When waiting for the board to become "not ready"
don't print a message saying "waiting for board to
become ready" (possibly followed by a message saying
"failed waiting for board to become not ready".  Instead,
it should be "waiting for board to reset" and "failed
waiting for board to reset."

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
"
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:23:53 -06:00
Stephen M. Cameron
19adbb9254 cciss: increase time to wait for board reset to start
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:23:51 -06:00
Stephen M. Cameron
8f71bb829a cciss: get rid of message related magic numbers
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:23:50 -06:00
Stephen M. Cameron
e363e01436 cciss: fix reply pool and block fetch table memory leaks
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:23:50 -06:00
Stephen M. Cameron
2b48085f97 cciss: factor out irq request code
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:23:49 -06:00
Stephen M. Cameron
abf7966e61 cciss: factor out scatterlist allocation functions
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:23:48 -06:00
Stephen M. Cameron
54dae34320 cciss: factor out command pool allocation functions
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:23:47 -06:00
Stephen M. Cameron
62710ae1ce cciss: do a better job of detecting controller reset failure
Detect failure of controller reset by noticing if the 32 bytes of
"driver version" we store on the hardware in the config table
fail to get zeroed out.  Previously we noticed if the controller
did not transition to "simple mode", but this did not detect reset
failure if the controller was already in simple mode prior to
the reset attempt (e.g. due to module parameter hpsa_simple_mode=1).

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:23:46 -06:00
Stephen M. Cameron
9bd3c20487 cciss: add readl after writel in interrupt mask setting code
This is to ensure the board interrupts are really off when
these functions return.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 08:23:45 -06:00
David Sterba
182608c829 btrfs: remove old unused commented out code
Remove code which has been #if0-ed out for a very long time and does not
seem to be related to current codebase anymore.

Signed-off-by: David Sterba <dsterba@suse.cz>
2011-05-06 12:34:10 +02:00
David Sterba
f2a97a9dbd btrfs: remove all unused functions
Remove static and global declarations and/or definitions. Reduces size
of btrfs.ko by ~3.4kB.

  text    data     bss     dec     hex filename
402081    7464     200  409745   64091 btrfs.ko.base
398620    7144     200  405964   631cc btrfs.ko.remove-all

Signed-off-by: David Sterba <dsterba@suse.cz>
2011-05-06 12:34:03 +02:00
Jiri Kosina
3d1c89b491 Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations"
This reverts commit b0c3af5ef0.

The driver has been rewritten in ARM tree.
2011-05-06 11:43:33 +02:00
Peter Zijlstra
63b6a6758e perf events, x86: Fix Intel Nehalem and Westmere last level cache event definitions
The Intel Nehalem offcore bits implemented in:

  e994d7d23a: perf: Fix LLC-* events on Intel Nehalem/Westmere

... are wrong: they implemented _ACCESS as _HIT and counted OTHER_CORE_HIT* as
MISS even though its clearly documented as an L3 hit ...

Fix them and the Westmere definitions as well.

Cc: Andi Kleen <ak@linux.intel.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1299119690-13991-3-git-send-email-ming.m.lin@intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-06 11:24:48 +02:00
Frederic Weisbecker
925f83c085 hw_breakpoints, powerpc: Fix CONFIG_HAVE_HW_BREAKPOINT off-case in ptrace_set_debugreg()
We make use of ptrace_get_breakpoints() / ptrace_put_breakpoints() to
protect ptrace_set_debugreg() even if CONFIG_HAVE_HW_BREAKPOINT if off.
However in this case, these APIs are not implemented.

To fix this, push the protection down inside the relevant ifdef.
Best would be to export the code inside
CONFIG_HAVE_HW_BREAKPOINT into a standalone function to cleanup
the ifdefury there and call the breakpoint ref API inside. But
as it is more invasive, this should be rather made in an -rc1.

Fixes this build error:

  arch/powerpc/kernel/ptrace.c:1594: error: implicit declaration of function 'ptrace_get_breakpoints' make[2]: ***

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: LPPC <linuxppc-dev@lists.ozlabs.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: v2.6.33.. <stable@kernel.org>
Link: http://lkml.kernel.org/r/1304639598-4707-1-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-06 11:24:46 +02:00
Lin Ming
e04d1b23f9 perf events, x86: Add SandyBridge stalled-cycles-frontend/backend events
Extend the Intel SandyBridge PMU driver with definitions
for generic front-end and back-end stall events.

( As commit 3011203 "perf events, x86: Add Westmere stalled-cycles-frontend/backend
  events" says, these are only approximations. )

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1304666042-17577-1-git-send-email-ming.m.lin@intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-06 09:37:03 +02:00
Russell King
52fe116376 ARM: RiscPC: acornfb: fix section mismatches
WARNING: drivers/video/built-in.o(.devinit.text+0x38): Section mismatch in reference from the function acornfb_probe() to the function .init.text:acornfb_setup()
The function __devinit acornfb_probe() references
a function __init acornfb_setup().
If acornfb_setup is only used by acornfb_probe then
annotate acornfb_setup with a matching annotation.

WARNING: drivers/video/built-in.o(.devinit.text+0x3c): Section mismatch in reference from the function acornfb_probe() to the function .init.text:acornfb_init_fbinfo()
The function __devinit acornfb_probe() references
a function __init acornfb_init_fbinfo().
If acornfb_init_fbinfo is only used by acornfb_probe then
annotate acornfb_init_fbinfo with a matching annotation.

WARNING: drivers/video/built-in.o(.devinit.text+0x4c0): Section mismatch in reference from the function acornfb_probe() to the (unknown reference) .init.data:(unknown)
The function __devinit acornfb_probe() references
a (unknown reference) __initdata (unknown).
If (unknown) is only used by acornfb_probe then
annotate (unknown) with a matching annotation.

WARNING: drivers/video/built-in.o(.devinit.text+0x4c8): Section mismatch in reference from the function acornfb_probe() to the (unknown reference) .init.data:(unknown)
The function __devinit acornfb_probe() references
a (unknown reference) __initdata (unknown).
If (unknown) is only used by acornfb_probe then
annotate (unknown) with a matching annotation.

WARNING: drivers/video/built-in.o(.devinit.text+0x4cc): Section mismatch in reference from the function acornfb_probe() to the (unknown reference) .init.data:(unknown)
The function __devinit acornfb_probe() references
a (unknown reference) __initdata (unknown).
If (unknown) is only used by acornfb_probe then
annotate (unknown) with a matching annotation.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-06 08:16:51 +01:00
Russell King
56f3aeb2c1 ARM: RiscPC: etherh: fix section mismatches
WARNING: drivers/net/arm/built-in.o(.data+0x0): Section mismatch in reference from the variable etherh_driver to the function .init.text:etherh_probe()
The variable etherh_driver references
the function __init etherh_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-06 08:14:57 +01:00
Hillf Danton
7142d17e8f sched: Shorten the construction of the span cpu mask of sched domain
For a given node, when constructing the cpumask for its
sched_domain to span, if there is no best node available after
searching, further efforts could be saved, based on small change
in the return value of find_next_best_node().

Signed-off-by: Hillf Danton <dhillf@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Yong Zhang <yong.zhang0@gmail.com>
Link: http://lkml.kernel.org/r/BANLkTi%3DqPWxRAa6%2BdT3ohEP6Z%3D0v%2Be4EXA@mail.gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-06 09:13:05 +02:00
Rakib Mullick
4934a4d3d3 sched: Wrap the 'cfs_rq->nr_spread_over' field with CONFIG_SCHED_DEBUG
cfs_rq->nr_spread_over is only used when CONFIG_SCHED_DEBUG is set.
So wrap it with CONFIG_SCHED_DEBUG.

Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1304528026.15681.3.camel@localhost.localdomain
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-06 09:04:19 +02:00
Sergei Shtylyov
8ac764e347 DA8xx: move base address #define's to their proper place
Move DA8XX_MMCSD0_BASE, DA8XX_LCD_CNTRL_BASE,  and DA8XX_DDR2_CTL_BASE from
<mach/da8xx.h> to devices-da8xx.c as the latter file is the only place where
these macros are used.

While at it, restore sorting the base address macros by address value in
devices-da8xx.c...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
2011-05-06 12:10:54 +05:30
Sergei Shtylyov
e0c199d098 DA8xx: kill duplicate #define DA8XX_PLL1_BASE
Commit 044ca01521 (davinci: da850/omap-l138: add
support for SoC suspend) introduced DA8XX_PLL1_BASE despite PLL1 exists only on
DA850/OMAP-L138 and da850.c even already #define'd DA850_PLL1_BASE. Kill the
duplicate macro, renaming an existing reference to it...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
2011-05-06 12:10:54 +05:30
Sergei Shtylyov
5a9f68fd26 DA8xx: kill duplicate #define DA8XX_GPIO_BASE
DA8XX_GPIO_BASE is #define'd in both <mach/da8xx.h> and devices-da8xx.c;
moreover, it's not even used in the latter file...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
2011-05-06 12:10:53 +05:30
Gleb Natapov
29ce831000 rcu: provide rcu_virt_note_context_switch() function.
Provide rcu_virt_note_context_switch() for vitalization use to note
quiescent state during guest entry.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-05-05 23:16:59 -07:00
Paul E. McKenney
bad6e1393c rcu: get rid of signed overflow in check_cpu_stall()
Signed integer overflow is undefined by the C standard, so move
calculations to unsigned.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-05-05 23:16:59 -07:00
Eric Dumazet
b554d7de8d rcu: optimize rcutiny
rcu_sched_qs() currently calls local_irq_save()/local_irq_restore() up
to three times.

Remove irq masking from rcu_qsctr_help() / invoke_rcu_kthread()
and do it once in rcu_sched_qs() / rcu_bh_qs()

This generates smaller code as well.

   text	   data	    bss	    dec	    hex	filename
   2314	    156	     24	   2494	    9be	kernel/rcutiny.old.o
   2250	    156	     24	   2430	    97e	kernel/rcutiny.new.o

Fix an outdated comment for rcu_qsctr_help()
Move invoke_rcu_kthread() definition before its use.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-05-05 23:16:59 -07:00
Paul E. McKenney
2655d57ef3 rcu: prevent call_rcu() from diving into rcu core if irqs disabled
This commit marks a first step towards making call_rcu() have
real-time behavior.  If irqs are disabled, don't dive into the
RCU core.  Later on, this new early exit will wake up the
per-CPU kthread, which first must be modified to handle the
cases involving callback storms.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-05-05 23:16:59 -07:00